[Bug 125471] Possible Solution: Ubuntu Server and Debian - EXACTLY same installation in a VM. See below.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I've been testing both, Ubuntu Server and Debian in VM's to make a decision for installation for a production server. One of the tests I ran was exactly this: Using mirroring for all of the system's partitions, including the OS. I reproduced exactly the same steps for both OS's like 3 times each. After each installation, I tried shutting down and removing one of the disks. For Debian, succeeded all times. Reconnected the disk and resynchronized the disks and everything went OK. For Ubuntu Server, failed all times, taking me to busy box shell. I could connect the disk back and boot it up without doing anything else. Thought I've installed Ubuntu Server much more than 3 times before trying Debian out, I have further info about this behavior. Twice, after reconnecting the disk back, I could see the disk resynchronizing, but at about 16% or so, I got kernel panic due to inability to synchronize disks in RAID1. About the VM's: Running latest VMware Server. Ubuntu Server 7.10 - i386 Debian 40r3-i386 Hope it is of some use while pursuing a definite solution for this issue. Best regards, Fabiano Antunes (mactimes) [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iQIVAwUBR/72XHmASCWcPmiYAQJUMw/+KxbeEzClFLLbeGAOSs55JybfpsBz+7Ju VExSOyHCzRasyIKAlxYAl0syFezaIsPUHULrTFQAa9W4q9D5MNspCobC4hjAUl8z GUE4DHoWj5RzOQQo6HS+p7Y8IwFA/LMqlIFGarFrWsUK6iV6T/LHRJNR5s8XOu4l hsjprY8a9xNVD75CeHK6DCgg1XXEcwizPtRgp/GUB+O6kHc1oAq7qdGmT8Bgk9ap jo3I6fHhxi80PMlEM1ZL8YDFWWLUuFfeI0J/4OzyParRTtakT0rgP3tcrmiWmrbO HJ1+LKqFwMM++eayj0cvKvgU+KCDkeirGNPosE0lNOvlvGtum8MJm6VgOl2xhKRc j74JdKUndpprqF5y5umTlVgRPZcZfkFeIKOsC3nfrex6SI4DAtXtJTqDPXpdN4W2 yCLdhYZvuHQ+AkFxsDAa+lTZBNXf3jgH2i+A9zMpDnE2gV/Qu2LILz5z6hVlZU6t FJtmSFACyKX2WENE3X/9tHkxbOaFrfOx4J9TbLWgHN4AmfwGOPYKpVlPfYjHilgE k64lFM1QrWa9ttBkTMfbIW2QqiqFP5p5VBT3hhoC21cYdRP9KaOZ3juab7kKw9KU ESDgcmfOdYuzk3lhn5Cq4EXCM1ejGzloHBOmKKiwDhi4FCybbFRnaVjIgsHGQGsK exvYMoXmPiw= =Rpy3 -END PGP SIGNATURE- -- Booting from a degraded array could be improved https://bugs.launchpad.net/bugs/125471 You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214556] Re: [Hardy] Can't share files
DO : sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install samba libpam-smbpass verify that your are in the group named sambashare. In terminal type "groups" if not go to user.group management and yourself to this group (samba share) after that, logout and login Create a dire named "test" on your desktop and try to share it -- [Hardy] Can't share files https://bugs.launchpad.net/bugs/214556 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214714] Re: Upgrading to Hardy destroyed my network shares and when I try to recreate them I get this long complicated error message
** Changed in: samba (Ubuntu) Sourcepackagename: nautilus-share => samba -- Upgrading to Hardy destroyed my network shares and when I try to recreate them I get this long complicated error message https://bugs.launchpad.net/bugs/214714 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214714] [NEW] Upgrading to Hardy destroyed my network shares and when I try to recreate them I get this long complicated error message
You have been subscribed to a public bug:
I just took the plunge and upgraded from Gutsy to the latest pre-release
version of Hardy. Overall it fixed a bunch of problems for me and I'm
delighted with the new version. I did run into one issue that caused
some problems though:
After I had upgraded to Hardy my folder called "music" was no longer
shared as a SMB windows network share. This means that my Windows
computer (which doesn't have any music stored on it) cannot play any
tunes. I immediately tried to fix this by sharing the folder again but
when I tried I got this really long strange error message that says I
should talk to by system administrator ("yeah right, I wish I could
afford one of those actually :-)". The error message I got was:
'net usershare' returned error 255: net usershare add: cannot share path
/media/EXTERNAL___/music as we are restricted to only sharing directories
we own.
Ask the administrator to add the line "usershare owner only = False"
to the [global] section of the smb.conf to allow this.
The folder I'm trying to share over SMB is located on one of those
external USB harddrives and it's formatted as NTFS. That means that when
I mount it in Ubuntu all the files are marked as "owned by root". Now,
in Gutsy I was able to share these folders just fine.
However, it seems that in Hardy some kind of flag has been activated
that prevents me from sharing files that I don't own. Well, clearly it's
my files that are stored on this USB harddrive but it seems that the
ability to share folders from NTFS drives has been lost in Hardy.
There was no obvious workaround for me to solve this problem, except
copying the files to my root partition which is ext2 (this is quite
inconvenient though because my music collection doesn't fit on this
partition). There was also no checkbox that allowed me to type in my
administrator password and override this error message and share the
folder anyway.
I've attached a screenshot to this bug, that illustrates the problem I
ran into.
** Affects: samba (Ubuntu)
Importance: Undecided
Status: New
--
Upgrading to Hardy destroyed my network shares and when I try to recreate them
I get this long complicated error message
https://bugs.edge.launchpad.net/bugs/214714
You received this bug notification because you are a member of Ubuntu Server
Team, which is subscribed to samba in ubuntu.
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214829] Re: [hardy] Cannot xforward firefox
With firefox running, [EMAIL PROTECTED]:~$ ssh -vvvX -p2 [EMAIL PROTECTED] firefox OpenSSH_4.7p1 Debian-8ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to corenne [128.205.147.14] port 2. debug1: Connection established. debug1: identity file /home/graham/.ssh/identity type -1 debug1: identity file /home/graham/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/graham/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-END' debug3: key_read: missing keytype debug1: identity file /home/graham/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.7p1 Debian-8ubuntu1 debug1: match: OpenSSH_4.7p1 Debian-8ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.7p1 Debian-8ubuntu1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[EMAIL PROTECTED],hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[EMAIL PROTECTED],hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[EMAIL PROTECTED],zlib debug2: kex_parse_kexinit: none,[EMAIL PROTECTED],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[EMAIL PROTECTED],hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[EMAIL PROTECTED],hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[EMAIL PROTECTED] debug2: kex_parse_kexinit: none,[EMAIL PROTECTED] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 538/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: put_host_port: [128.205.147.14]:2 debug3: put_host_port: [corenne]:2 debug3: check_host_in_hostfile: filename /home/graham/.ssh/known_hosts debug3: check_host_in_hostfile: match line 4 debug3: check_host_in_hostfile: filename /home/graham/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '[corenne]:2' is known and matches the RSA host key. debug1: Found key in /home/graham/.ssh/known_hosts:4 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/graham/.ssh/id_dsa (0x7f974186a4b0) debug2: key: /home/graham/.ssh/identity ((nil)) debug2: key: /home/graham/.ssh/id_rsa ((nil)) debug1: Authentications that can continue: publicke
[Bug 214829] Re: [hardy] Cannot xforward firefox
I figured it out, it only happens when firefox is running on the local machine, I will post the requested information next. ** Changed in: openssh (Ubuntu) Status: Invalid => New -- [hardy] Cannot xforward firefox https://bugs.launchpad.net/bugs/214829 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214829] Re: [hardy] Cannot xforward firefox
Cannot reproduce anymore ** Changed in: openssh (Ubuntu) Status: New => Invalid -- [hardy] Cannot xforward firefox https://bugs.launchpad.net/bugs/214829 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 211906] Re: package mysql-server 5.0.51a-3ubuntu5 failed to install/upgrade: dependency problems - leaving unconfigured
On Thu, Apr 10, 2008 at 1:14 AM, Mathias Gug <[EMAIL PROTECTED]> wrote: > > In daemon.log: > > Apr 10 00:33:09 kunami-laptop mysqld[17471]: 080410 0:33:09 [ERROR] > Can't start server: Bind on TCP/IP port: Cannot assign requested address > > Is this a default mysql configuration file ? Can you make sure that the > loopback interface is running correctly ? > > Could you attach your mysql configuration file (/etc/mysql/my.cnf) ? > > -- > package mysql-server 5.0.51a-3ubuntu5 failed to install/upgrade: > dependency problems - leaving unconfigured > https://bugs.launchpad.net/bugs/211906 > You received this bug notification because you are a direct subscriber > of the bug. > ** Attachment added: "unnamed" http://launchpadlibrarian.net/13346021/unnamed ** Attachment added: "my.cnf" http://launchpadlibrarian.net/13346022/my.cnf -- package mysql-server 5.0.51a-3ubuntu5 failed to install/upgrade: dependency problems - leaving unconfigured https://bugs.launchpad.net/bugs/211906 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.0 in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 211631] Re: CIFS/SMBFS issue (was not resolved on #207441)
The last part of this is a wpasupplicant bug. The ordering of the shutdown scripts is already well-established, and unmounting remote filesystems takes place at S31 (S31umountnfs.sh). wpasupplicant needs to be fixed to run its shutdown script later than this; probably at S35 or S36, which is the point in the runlevel sequence where networking as a whole is shut down in Debian. ** Also affects: wpasupplicant (Ubuntu) Importance: Undecided Status: New ** Changed in: wpasupplicant (Ubuntu) Importance: Undecided => Medium Status: New => Confirmed -- CIFS/SMBFS issue (was not resolved on #207441) https://bugs.launchpad.net/bugs/211631 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 215410] Re: disable-weak-auth.patch renders ineffective "client plaintext auth = yes" in smb.conf
> This is not a case of the "client lanman auth = no" disabling the "client plaintext auth" option. Are you sure? That's the only case in which I can reproduce the behavior you describe. If I set 'client plaintext auth = yes' in /etc/samba/smb.conf without also setting 'client lanman auth = Yes', then plaintext auth remains disabled. If I set both options to 'yes', then plaintext auth works, verifiable with both testparm and smbclient. ** Changed in: samba (Ubuntu) Assignee: (unassigned) => Steve Langasek (vorlon) Status: New => Incomplete -- disable-weak-auth.patch renders ineffective "client plaintext auth = yes" in smb.conf https://bugs.launchpad.net/bugs/215410 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214556] Re: [Hardy] Can't share files
Thank you for taking the time to report this bug and help to improve Ubuntu. What do you mean when you say the folder contents "could not be displayed"? Were you given an error message? Did the share open in nautilus but give you an empty file list? ** Changed in: samba (Ubuntu) Status: New => Incomplete -- [Hardy] Can't share files https://bugs.launchpad.net/bugs/214556 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 65230] Re: startup messages continue on screen after first login prompt appears
Sounds reasonable -- startup messages continue on screen after first login prompt appears https://bugs.launchpad.net/bugs/65230 You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 215410] [NEW] disable-weak-auth.patch renders ineffective "client plaintext auth = yes" in smb.conf
Public bug reported: Binary package hint: samba A change introduced in 3.0.27a-2(seen below) makes it impossible to access samba resources that require a plaintext password. An instance of "client plaintext auth = yes" in the [global] options section is ignored by smbclient when attempting to connect to a samba server with $smbclient -U ///. The error message given is: "Server requested plaintext password but 'client use plaintext auth' is disabled". Note the incorrect use of the word "use" in the single-quoted section. Adding a section of "client use plaintext auth = yes" in the global section results in an error about the afformentioned unknown option being ignored. An instance of "client plaintext auth = yes" is not an unknown option, but is ineffective becuase the patch "hard wires" the program preventing plaintext passwords. A much better solution would be to make the default smb.conf configuration file to feature the "client use plaintext auth = no" option, and allow the user to set to "yes" if necessary. This is not a case of the "client lanman auth = no" disabling the "client plaintext auth" option. This bug is important because certain large universities still have servers that require plaintext passwords. ==Problematic Update Below samba (3.0.27a-2) unstable; urgency=low * debian/patches/disable-weak-auth.patch: disable plaintext authentication on the client, and lanman authentication on both client and server, by default since these are only needed for Win9x or Samba with encrypted passwords disabled and are potential password attack vectors. This change is backported from Samba 3.2. LP: #163194. ** Affects: samba (Ubuntu) Importance: Undecided Status: New -- disable-weak-auth.patch renders ineffective "client plaintext auth = yes" in smb.conf https://bugs.launchpad.net/bugs/215410 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 41912] Re: useradd fails to create the user sshd. Package installation fails.
[LaFume:~] nxvl$ whereis adduser adduser: /usr/sbin/adduser /etc/adduser.conf /usr/share/adduser /usr/share/man/man8/adduser.8.gz -- useradd fails to create the user sshd. Package installation fails. https://bugs.launchpad.net/bugs/41912 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214456] Re: package ibmasm-utils 3.0-1ubuntu3 failed to install/upgrade: Unterprozess neues pre-removal-Skript gab den Fehlerwert 3 zur?ck
Looks like their is another version now 3.0-lubuntu7, but I'm still getting the error. [EMAIL PROTECTED]:~$ sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: ibmasm-utils 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/15.9kB of archives. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? ye (Reading database ... 99358 files and directories currently installed.) Preparing to replace ibmasm-utils 3.0-1ubuntu4 (using .../ibmasm-utils_3.0-1ubuntu7_i386.deb) ... Stopping ibmasm: invoke-rc.d: initscript ibmasm, action "stop" failed. dpkg: warning - old pre-removal script returned error exit status 3 dpkg - trying script from the new package instead ... Stopping ibmasm: Stopping ibmasm: invoke-rc.d: initscript ibmasm, action "stop" failed. dpkg: error processing /var/cache/apt/archives/ibmasm-utils_3.0-1ubuntu7_i386.deb (--unpack): subprocess new pre-removal script returned error exit status 3 * \nWaiting for ibmasm device to appear (2 seconds timeout) . . Errors were encountered while processing: /var/cache/apt/archives/ibmasm-utils_3.0-1ubuntu7_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) -- package ibmasm-utils 3.0-1ubuntu3 failed to install/upgrade: Unterprozess neues pre-removal-Skript gab den Fehlerwert 3 zur?ck https://bugs.launchpad.net/bugs/214456 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to ibmasm-utils in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 208441] Re: open-iscsi will not start at boot if /usr is on a separate mount point
Confirmed that the above change works -- open-iscsi will not start at boot if /usr is on a separate mount point https://bugs.launchpad.net/bugs/208441 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to open-iscsi in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 215389] [NEW] No battery charge percentage on belkin usb avr
Public bug reported: Binary package hint: nut After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb driver seems to be working, except for the charge percentage: $ /lib/nut/megatec_usb -D -a SAI ... Checking device (0665/5161) (001/007) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (0 bytes) => Starting UPS detection process... Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.0 225.0 225.0 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.0 225.0 043 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 043 50.1 13.6 25.0 1001] 0 out of 5 detection attempts failed (minimum failures: 2). Asking for UPS information [I]... get_data_agiler: raw dump: (0 bytes) => I => FAILED [short read] I detail: (0 bytes) => Megatec protocol UPS detected. Cancelling any pending shutdown or battery test. Asking for UPS power ratings [F]... get_data_agiler: raw dump: (0 bytes) => F => FAILED [short read] F detail: (0 bytes) => Cannot calculate charge percentage for this UPS. <- Done setting up the UPS. Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.0 042 50.1 13.6 25.0 1001] ... So I tried the svn version (as today, revision 143) and the result is: $ drivers/megatec_usb -D -a SAI ... Checking device (0665/5161) (001/007) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_agiler: raw dump: (0 bytes) => Starting UPS detection process... Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 226.9 226.9 044 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 226.9 226.9 044 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 227.4 226.9 043 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 227.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 226.9 044 50.1 13.6 25.0 1001] 0 out of 5 detection attempts failed (minimum failures: 2). Cancelling any pending shutdown or battery test. Asking for UPS information [I]... get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (0 bytes) => I => FAILED [short read] I detail: (0 bytes) => Megatec protocol UPS detected. Parameter [ignoreoff]: [false] Asking for UPS power ratings [F]... get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (24 bytes) => 23 32 33 30 2e 30 20 30 30 32 20 31 32 2e 30 30 20 35 30 2e 30 0d 30 30 F => OK [#230.0 002 12.00 50.0] 12.0V battery, interval [9.7V, 13.7V]. <- Done setting up the UPS. Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 227.4 043 50.1 13.6 25.0 1001] Calculated battery charge: 97.5% <- dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 226.9 227.4 042 50.1 13.6 25.0 1001] Calculated battery charge: 97.5% Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 226.9 226.9 044 50.1 13.6 25.0 1001] Calculated battery charge: 97.5% ... ** Affects: nut (Ubuntu) Importance: Undecided Status: New -- No battery charge percentage on belkin usb avr https://bugs.launchpad.net/bugs/215389 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 209001] Re: Nut no longer functions with belkin usb avr
** Attachment added: "signature.asc" http://launchpadlibrarian.net/13342360/signature.asc -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 209001] Re: Nut no longer functions with belkin usb avr
David Erosa wrote: > I guess I'd better open a new bug for this, right? Sound like a good idea, indeed. Thanks a lot. -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 209001] Re: Nut no longer functions with belkin usb avr
Also I see that in the new version my syslog is filling up with these kernel messages (4 every minute): usb 2-1: usbfs: process 6437 (megatec_usb) did not claim interface 0 before use It looks like I am having the problem of it not getting battery percentage either, I guess I spoke too soon on it working. -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 209001] Re: Nut no longer functions with belkin usb avr
I guess I'd better open a new bug for this, right? -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 209001] Re: Nut no longer functions with belkin usb avr
Sorry I took so long to check the bug... The new package seems to be almost working, but the driver says it can't calculate the battery %: $ /lib/nut/megatec_usb -D -a SAI ... Checking device (0665/5161) (001/007) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (0 bytes) => Starting UPS detection process... Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.0 225.0 225.0 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.0 225.0 043 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 043 50.1 13.6 25.0 1001] 0 out of 5 detection attempts failed (minimum failures: 2). Asking for UPS information [I]... get_data_agiler: raw dump: (0 bytes) => I => FAILED [short read] I detail: (0 bytes) => Megatec protocol UPS detected. Cancelling any pending shutdown or battery test. Asking for UPS power ratings [F]... get_data_agiler: raw dump: (0 bytes) => F => FAILED [short read] F detail: (0 bytes) => Cannot calculate charge percentage for this UPS. <- Done setting up the UPS. Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... Q1 => OK [(225.4 225.4 225.0 042 50.1 13.6 25.0 1001] ... So I tried the svn version (as today, revision 143) and the result is: $ drivers/megatec_usb -D -a SAI ... Checking device (0665/5161) (001/007) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_agiler: raw dump: (0 bytes) => Starting UPS detection process... Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 226.9 226.9 044 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 226.9 226.9 044 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(226.9 227.4 226.9 043 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 227.4 042 50.1 13.6 25.0 1001] Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 226.9 044 50.1 13.6 25.0 1001] 0 out of 5 detection attempts failed (minimum failures: 2). Cancelling any pending shutdown or battery test. Asking for UPS information [I]... get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (0 bytes) => I => FAILED [short read] I detail: (0 bytes) => Megatec protocol UPS detected. Parameter [ignoreoff]: [false] Asking for UPS power ratings [F]... get_data_agiler: raw dump: (0 bytes) => get_data_agiler: raw dump: (24 bytes) => 23 32 33 30 2e 30 20 30 30 32 20 31 32 2e 30 30 20 35 30 2e 30 0d 30 30 F => OK [#230.0 002 12.00 50.0] 12.0V battery, interval [9.7V, 13.7V]. <- Done setting up the UPS. Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 227.4 227.4 043 50.1 13.6 25.0 1001] Calculated battery charge: 97.5% <- dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 226.9 227.4 042 50.1 13.6 25.0 1001] Calculated battery charge: 97.5% Asking for UPS status [Q1]... get_data_agiler: raw dump: (0 bytes) => Q1 => OK [(227.4 226.9 226.9 044 50.1 13.6 25.0 1001] Calculated battery charge: 97.5% ... -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 214829] Re: [hardy] Cannot xforward firefox
Can you capture some more verbose output with "ssh -vvvX [EMAIL PROTECTED] "firefox" and post the verbose debug here (scrubbed if necessary)? Additionally, when you launch a shell, can you make absolutely sure that you're on the remote machine (compare the difference between ifconfig on the local and remote machines and make sure those are different). Then, when you launch firefox, grab the output of "ps -ef | grep firefox" on both the local and remote machine. You should see a process called "/usr/lib/firefox-3.0b5/firefox" on the remote machine, but no such on the local machine. :-Dustin -- [hardy] Cannot xforward firefox https://bugs.launchpad.net/bugs/214829 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 208552] Re: Poor performance in smbclient while transmitting
It doesn't explain the poor performance between two Ubuntu computers. Vista is the quicker in my results. Those posts in your link are a year old and the problem is probably solved because I don't feel that i've experienced it. -- Poor performance in smbclient while transmitting https://bugs.launchpad.net/bugs/208552 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214829] Re: [hardy] Cannot xforward firefox
Thunderbird forwards fine (well, as long as it isn't open on the remote Hardy...I assume thats normal behavior, it forwards the window that says a session is already running), and any other random application I tried worked as expected. -- [hardy] Cannot xforward firefox https://bugs.launchpad.net/bugs/214829 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 208552] Re: Poor performance in smbclient while transmitting
You might want to have a look at this: http://forums.whirlpool.net.au/forum-replies-archive.cfm/691048.html ** Changed in: samba (Ubuntu) Importance: Undecided => Low -- Poor performance in smbclient while transmitting https://bugs.launchpad.net/bugs/208552 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 209001] Re: Nut no longer functions with belkin usb avr
Downloaded: http://launchpadlibrarian.net/13331717/nut_2.2.1-2.1ubuntu6_amd64.deb Result: Working! Thank you all. -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 214933] Re: /etc/postfix/main.cf references nonexistent doc
On Thu, Apr 10, 2008 at 05:14:27AM -, Scott Kitterman wrote: > On Thursday 10 April 2008 00:57, Quinn Weaver wrote: > > /usr/share/doc/postfix/ > > It's there on my Hardy server. What release are you using? Sorry, I should have specified. This is in Gutsy. I've added the tag "gutsy" to the bug--is that the right way to note this? The launchpad UI seems to have changed... -- Quinn Weaver, independent contractor | President, San Francisco Perl Mongers http://fairpath.com/quinn/resume/ | http://sf.pm.org/ 510-520-5217 ** Tags added: gutsy -- /etc/postfix/main.cf references nonexistent doc https://bugs.launchpad.net/bugs/214933 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to postfix in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 189616] Re: connection problems under load with hardy dovecot
** Attachment added: "dovecot config" http://launchpadlibrarian.net/13336759/dovecot.conf -- connection problems under load with hardy dovecot https://bugs.launchpad.net/bugs/189616 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dovecot in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 41912] can't find useradd ubuntu
I do not obtain to add to 1 user I do not find useradd I appear me an error help me please [EMAIL PROTECTED]:~$ to /usr/bin/adduser nagios bash: to /usr/bin/adduser: Filing-cabinet or in existent directory -- useradd fails to create the user sshd. Package installation fails. https://bugs.launchpad.net/bugs/41912 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 213482] Re: Dapper to Hardy upgrade fails with slapd
this package is through binary NEW, and I've just promoted it to main; marking as fix released. ** Changed in: cyrus-sasl2 (Ubuntu) Status: Fix Committed => Fix Released -- Dapper to Hardy upgrade fails with slapd https://bugs.launchpad.net/bugs/213482 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to cyrus-sasl2 in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 214829] [NEW] [hardy] Cannot xforward firefox
(1) Please try this with another application that you have installed to see if this is a firefox-only problem (2) Make sure you have ssh X forwarding turned on. You may have your RHEL machine automatically configured to do that all of the time. Try using "ssh -X" to your hardy box, and see if you can get an x-forwarded firefox session. If not, this is likely a duplicate of Bug #202508, so please mark as a duplicate and note that. If "ssh -X" does work, you either need to use the -X option, or permanently configure your /etc/ssh/sshd_config file to always X forward, or put it in your local .ssh/config file. :-Dustin -- [hardy] Cannot xforward firefox https://bugs.launchpad.net/bugs/214829 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 212571] Re: can't add group from the UI
*** This bug is a duplicate of bug 205144 *** https://bugs.launchpad.net/bugs/205144 Thanks for your fast answer. Since your bug is in gnome-system-tools, I set it as a duplicate of bug 205144 ** This bug has been marked a duplicate of bug 205144 users-admin cannot add groups in hardy beta -- can't add group from the UI https://bugs.launchpad.net/bugs/212571 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 209001] Re: Nut no longer functions with belkin usb avr
2008/4/10, Launchpad Bug Tracker <[EMAIL PROTECTED]>: > This bug was fixed in the package nut - 2.2.1-2.1ubuntu6 > ... it's your turn Andrew ;-) -- /me -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 209001] Re: Nut no longer functions with belkin usb avr
This bug was fixed in the package nut - 2.2.1-2.1ubuntu6 --- nut (2.2.1-2.1ubuntu6) hardy; urgency=low * debian/patches/01_fix_megatec_regression.dpatch - Updated patch thanks to Alexander I. Gordeev . (LP: #209001) -- Chuck Short <[EMAIL PROTECTED]> Thu, 10 Apr 2008 09:33:53 -0400 ** Changed in: nut (Ubuntu) Status: Confirmed => Fix Released -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 209001] Re: Nut no longer functions with belkin usb avr
Im in the middle of backporting the patch. Thanks chuck -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 209001] Re: Nut no longer functions with belkin usb avr
2008/4/10, Alexander I. Gordeev <[EMAIL PROTECTED]>: > On Thu, 10 Apr 2008 15:19:09 +0400, Arnaud Quette <[EMAIL PROTECTED]> wrote: > > > thanks for your testing and feedback Andrew. > > > > @Chuck: it seems that you have not taken the right patch(s). > > @Alex: can you please point to Chuck the right ones? > > possibly using Charles' Trac (http://boxster.ghz.cc/projects/nut/timeline) > > > > -- Arnaud > > > > > The right changes are in revisions 1420-1422 and 1424-1426. > I've attached the cumulative patch. thanks a lot for your quick action Alex. @Chuck: up to you now... -- Arnaud -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 209001] Re: Nut no longer functions with belkin usb avr
thanks for your testing and feedback Andrew. @Chuck: it seems that you have not taken the right patch(s). @Alex: can you please point to Chuck the right ones? possibly using Charles' Trac (http://boxster.ghz.cc/projects/nut/timeline) -- Arnaud -- Nut no longer functions with belkin usb avr https://bugs.launchpad.net/bugs/209001 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 208419] Re: Integrate samba password in PAM
This bug was fixed in the package nautilus-share - 0.7.2-0ubuntu5 --- nautilus-share (0.7.2-0ubuntu5) hardy; urgency=low * 02_install_missing_samba.dpatch: - install libpam-smbpass in addition to samba (LP: #208419) -- Michael Vogt <[EMAIL PROTECTED]> Thu, 10 Apr 2008 11:46:49 +0200 ** Changed in: nautilus-share (Ubuntu Hardy) Status: In Progress => Fix Released -- Integrate samba password in PAM https://bugs.launchpad.net/bugs/208419 You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 208419] Re: Integrate samba password in PAM
** Changed in: nautilus-share (Ubuntu Hardy) Assignee: Ubuntu Desktop Bugs (desktop-bugs) => Michael Vogt (mvo) Status: Confirmed => In Progress -- Integrate samba password in PAM https://bugs.launchpad.net/bugs/208419 You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 213482] Re: Dapper to Hardy upgrade fails with slapd
Waiting for binary NEW and needs to be added to main. ** Changed in: cyrus-sasl2 (Ubuntu) Status: In Progress => Fix Committed -- Dapper to Hardy upgrade fails with slapd https://bugs.launchpad.net/bugs/213482 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to cyrus-sasl2 in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
