[Bug 1538775] [NEW] multipath-tools-boot relies on scsi_wait_scan module, fails multipath setup
You have been subscribed to a public bug:
Release: Ubuntu 14.04.3 LTS
Kernel: linux-image-3.16.0-59-generic
A clean system installed fresh today (2016-01-27)
In attempting to configure a system to boot-from-SAN and enable
multipath support I ran into an issue whereby despite the multiple paths
being detected (when running the multipath command from the CLI) the
configuration wasn't being enabled at boot. After examining /usr/share
/initramfs-tools/scripts/local-top/multipath I found the following:
verbose && log_begin_msg "Waiting for scsi storage"
{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; }
>/dev/null 2>&1
verbose && log_end_msg
The problem appears to be that the scsi_wait_scan module doesn't exist
and so there is no wait before the multipath scan is performed. I
managed to observe this briefly during bootup (with the script edited)
and could see it performed the scan before sda/sdb was discovered.
I also found a debian bug report indicating the module was removed a
while back (https://lists.debian.org/debian-
kernel/2012/05/msg00791.html).
After adding in an artificial delay for testing the multipath command
does what is expected and configures the paths accordingly. I'm not sure
what the correct approach is if the scsi_wait_scan module is removed.
I also found that the same local-top script doesnt have the dm-round-
robin module loaded (but it is included in the initrd by the associated
hook script), however I'm not sure if that is by design. I know I need
it for my specific use-case, but don't know if it is deliberately
excluded to prevent breakage on SAN units that don't support native
round-robin.
** Affects: multipath-tools (Ubuntu)
Importance: Undecided
Status: New
--
multipath-tools-boot relies on scsi_wait_scan module, fails multipath setup
https://bugs.launchpad.net/bugs/1538775
You received this bug notification because you are a member of Ubuntu Server
Team, which is subscribed to multipath-tools in Ubuntu.
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1538775] [NEW] multipath-tools-boot relies on scsi_wait_scan module, fails multipath setup
Public bug reported:
Release: Ubuntu 14.04.3 LTS
Kernel: linux-image-3.16.0-59-generic
A clean system installed fresh today (2016-01-27)
In attempting to configure a system to boot-from-SAN and enable
multipath support I ran into an issue whereby despite the multiple paths
being detected (when running the multipath command from the CLI) the
configuration wasn't being enabled at boot. After examining /usr/share
/initramfs-tools/scripts/local-top/multipath I found the following:
verbose && log_begin_msg "Waiting for scsi storage"
{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; }
>/dev/null 2>&1
verbose && log_end_msg
The problem appears to be that the scsi_wait_scan module doesn't exist
and so there is no wait before the multipath scan is performed. I
managed to observe this briefly during bootup (with the script edited)
and could see it performed the scan before sda/sdb was discovered.
I also found a debian bug report indicating the module was removed a
while back (https://lists.debian.org/debian-
kernel/2012/05/msg00791.html).
After adding in an artificial delay for testing the multipath command
does what is expected and configures the paths accordingly. I'm not sure
what the correct approach is if the scsi_wait_scan module is removed.
I also found that the same local-top script doesnt have the dm-round-
robin module loaded (but it is included in the initrd by the associated
hook script), however I'm not sure if that is by design. I know I need
it for my specific use-case, but don't know if it is deliberately
excluded to prevent breakage on SAN units that don't support native
round-robin.
** Affects: multipath-tools (Ubuntu)
Importance: Undecided
Status: New
** Project changed: saucy-backports => multipath-tools (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1538775
Title:
multipath-tools-boot relies on scsi_wait_scan module, fails multipath
setup
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1538775/+subscriptions
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
