Re: No audio - was: Real time for Ubuntu Studio 10.04 amd64
On Thu, 2010-07-29 at 07:55 +0200, Ralf Mardorf wrote: > On Thu, 2010-07-29 at 00:18 +0200, Gerhard Lang wrote: > > Am 28.07.2010 18:22, schrieb Ralf Mardorf: > > > Hi :) > > > > > > today I tried Ubuntu Studio again, but I had no time to work on the > > > realtime kernel issue, because I got some new issues. > > > > > > 1. > > > > > > After updating apps and the non-realtime kernel, my manually edited > > > grub.cfg was automatically overwritten by a completely grotesque > > > grub.cfg, without an automatically backup of the original. So tomorrow > > > I'll have to do a hard job to make all my really existing kernels and > > > Linuxes bootable again and those who are already bootable needs to get > > > rid of those annoying boot splashes, unfortunately I didn't backup it > > > myself. > > > > > > 2. > > > > > > I tried to play a MP3 by Movie Player, the PA setting meters show > > > output, optional for one or the other of my two Terratec EWX 24/96 sound > > > cards, but there was no sound hearable or visible for Envy24 control. > > > > > > 3. > > > > > > I installed KMPlayer, set it up to use JACK, run JACK, launched > > > KMPLayer, pushed play and play stand still. > > > > > > Any hints how to solve issue 2 and 3 are welcome. > > > > > > Cheers! > > > > > > Ralf > > > > > > > > hi Ralf > > I'd recommend grub2. On my stationary machine it finds all hard-drives, > > partitions, oses and every single Linux kernel. You'll just have to edit > > /etc/default/grub for your needs on the Linux from where you updated > > grub i.e. for getting rid of splash and recovery mode, setting defaults > > etc.. > > I also have an ice1712 card, a hoontech dsp24, and it worked ootb in > > 10.04 64bit. > > But just in the moment I have problems with sound/alsa in kernels > > 2.6.32.23 and 24 generic and preempt. > > With rt kernel 2.6.33.26-rt and jack2 (available i.e. in falktx ppas) > > and alsa updated to 1.0.23 all audio is fine. > > Even if both your cards are selectable in PA I think your problem has to > > do with multiple sound-card setup which seems to be not trivial in > > Ubuntu. Can you select them in Qjackctl too? > > good luck > > Gerhard > > > > Yes, I'm able to select them by Qjackctl too. I didn't make both cards a > single virtual card until now. > I can't boot any kernel-rt. There at least is an issue for X. I'm unable > to start GDM. There's no sound for the preempt kernels. > > Because there isn't a xorg.conf anymore I'm unable to switch between > drivers for the graphics ... right now I see there's a > xorg.conf.failsafe using the vesa driver. > > Hm, ASAP, not right now, I'll try to boot a kernel-rt in failsafe mode. > > - Ralf Booting a kernel-rt in recovery mode failed too. spinymouse1...@suse11-2:~> cat /media/ubuntu_studio/var/log/Xorg.failsafe.log [snip] (II) VESA(0): Total Memory: 4096 64KB banks (262144kB) (II) VESA(0): Configured Monitor: Using hsync range of 31.50-0.00 kHz (II) VESA(0): Configured Monitor: Using vrefresh range of 56.00-0.00 Hz (WW) VESA(0): Unable to estimate virtual size (II) VESA(0): Not using built-in mode "2048x1536" (no mode of this name) (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name) (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name) (II) VESA(0): Not using built-in mode "800x600" (no mode of this name) (II) VESA(0): Not using built-in mode "640x480" (no mode of this name) (II) VESA(0): Not using built-in mode "640x400" (no mode of this name) (II) VESA(0): Not using built-in mode "320x400" (no mode of this name) (II) VESA(0): Not using built-in mode "320x240" (no mode of this name) (II) VESA(0): Not using built-in mode "320x200" (no mode of this name) (WW) VESA(0): No valid modes left. Trying less strict filter... (II) VESA(0): Configured Monitor: Using hsync range of 31.50-0.00 kHz (II) VESA(0): Configured Monitor: Using vrefresh range of 56.00-0.00 Hz (WW) VESA(0): Unable to estimate virtual size (II) VESA(0): Not using built-in mode "2048x1536" (unknown reason) (II) VESA(0): Not using built-in mode "1280x1024" (unknown reason) (II) VESA(0): Not using built-in mode "1024x768" (unknown reason) (II) VESA(0): Not using built-in mode "800x600" (unknown reason) (II) VESA(0): Not using built-in mode "640x480" (unknown reason) (II) VESA(0): Not using built-in mode "640x400" (unknown reason) (II) VESA(0): Not using built-in mode "320x400" (unknown reason) (II) VESA(0): Not using built-in mode "320x240" (unknown reason) (II) VESA(0): Not using built-in mode "320x200" (unknown reason) (WW) VESA(0): No valid modes left. Trying aggressive sync range... (II) VESA(0): Configured Monitor: Using hsync range of 31.50-0.00 kHz (II) VESA(0): Configured Monitor: Using vrefresh range of 50.00-0.00 Hz (WW) VESA(0): Unable to estimate virtual size (II) VESA(0): Not using built-in mode "2048x1536" (unknown reason) (II) VESA(0): Not using built-in mode "1280x1024" (unknown reason) (II) VESA(0): Not using built-in mode "1024x768
Re: No audio - was: Real time for Ubuntu Studio 10.04 amd64
On Thu, 2010-07-29 at 00:18 +0200, Gerhard Lang wrote: > Am 28.07.2010 18:22, schrieb Ralf Mardorf: > > Hi :) > > > > today I tried Ubuntu Studio again, but I had no time to work on the > > realtime kernel issue, because I got some new issues. > > > > 1. > > > > After updating apps and the non-realtime kernel, my manually edited > > grub.cfg was automatically overwritten by a completely grotesque > > grub.cfg, without an automatically backup of the original. So tomorrow > > I'll have to do a hard job to make all my really existing kernels and > > Linuxes bootable again and those who are already bootable needs to get > > rid of those annoying boot splashes, unfortunately I didn't backup it > > myself. > > > > 2. > > > > I tried to play a MP3 by Movie Player, the PA setting meters show > > output, optional for one or the other of my two Terratec EWX 24/96 sound > > cards, but there was no sound hearable or visible for Envy24 control. > > > > 3. > > > > I installed KMPlayer, set it up to use JACK, run JACK, launched > > KMPLayer, pushed play and play stand still. > > > > Any hints how to solve issue 2 and 3 are welcome. > > > > Cheers! > > > > Ralf > > > > > hi Ralf > I'd recommend grub2. On my stationary machine it finds all hard-drives, > partitions, oses and every single Linux kernel. You'll just have to edit > /etc/default/grub for your needs on the Linux from where you updated > grub i.e. for getting rid of splash and recovery mode, setting defaults > etc.. > I also have an ice1712 card, a hoontech dsp24, and it worked ootb in > 10.04 64bit. > But just in the moment I have problems with sound/alsa in kernels > 2.6.32.23 and 24 generic and preempt. > With rt kernel 2.6.33.26-rt and jack2 (available i.e. in falktx ppas) > and alsa updated to 1.0.23 all audio is fine. > Even if both your cards are selectable in PA I think your problem has to > do with multiple sound-card setup which seems to be not trivial in > Ubuntu. Can you select them in Qjackctl too? > good luck > Gerhard > Yes, I'm able to select them by Qjackctl too. I didn't make both cards a single virtual card until now. I can't boot any kernel-rt. There at least is an issue for X. I'm unable to start GDM. There's no sound for the preempt kernels. Because there isn't a xorg.conf anymore I'm unable to switch between drivers for the graphics ... right now I see there's a xorg.conf.failsafe using the vesa driver. Hm, ASAP, not right now, I'll try to boot a kernel-rt in failsafe mode. - Ralf -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
Re: No audio - was: Real time for Ubuntu Studio 10.04 amd64
Am 28.07.2010 18:22, schrieb Ralf Mardorf: > Hi :) > > today I tried Ubuntu Studio again, but I had no time to work on the > realtime kernel issue, because I got some new issues. > > 1. > > After updating apps and the non-realtime kernel, my manually edited > grub.cfg was automatically overwritten by a completely grotesque > grub.cfg, without an automatically backup of the original. So tomorrow > I'll have to do a hard job to make all my really existing kernels and > Linuxes bootable again and those who are already bootable needs to get > rid of those annoying boot splashes, unfortunately I didn't backup it > myself. > > 2. > > I tried to play a MP3 by Movie Player, the PA setting meters show > output, optional for one or the other of my two Terratec EWX 24/96 sound > cards, but there was no sound hearable or visible for Envy24 control. > > 3. > > I installed KMPlayer, set it up to use JACK, run JACK, launched > KMPLayer, pushed play and play stand still. > > Any hints how to solve issue 2 and 3 are welcome. > > Cheers! > > Ralf > > hi Ralf I'd recommend grub2. On my stationary machine it finds all hard-drives, partitions, oses and every single Linux kernel. You'll just have to edit /etc/default/grub for your needs on the Linux from where you updated grub i.e. for getting rid of splash and recovery mode, setting defaults etc.. I also have an ice1712 card, a hoontech dsp24, and it worked ootb in 10.04 64bit. But just in the moment I have problems with sound/alsa in kernels 2.6.32.23 and 24 generic and preempt. With rt kernel 2.6.33.26-rt and jack2 (available i.e. in falktx ppas) and alsa updated to 1.0.23 all audio is fine. Even if both your cards are selectable in PA I think your problem has to do with multiple sound-card setup which seems to be not trivial in Ubuntu. Can you select them in Qjackctl too? good luck Gerhard -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
Re: No audio - was: Real time for Ubuntu Studio 10.04 amd64
On Wed, 2010-07-28 at 20:34 +0100, Matt Wheeler wrote: > Sorry, I can't answer either of the questions you said you actually > wanted help with but... > > On 28 July 2010 17:22, Ralf Mardorf wrote: > > Hi :) > > > > today I tried Ubuntu Studio again, but I had no time to work on the > > realtime kernel issue, because I got some new issues. > > > > 1. > > > > After updating apps and the non-realtime kernel, my manually edited > > grub.cfg was automatically overwritten by a completely grotesque > > grub.cfg, without an automatically backup of the original. So tomorrow > > I'll have to do a hard job to make all my really existing kernels and > > Linuxes bootable again and those who are already bootable needs to get > > rid of those annoying boot splashes, unfortunately I didn't backup it > > myself. > > Rather than editing /boot/grub/grub.cfg directly you need to edit or > replace the files in /etc/grub.d and then call update-grub. > The scripts in /etc/grub.d are executed in order, hence the filenames > beginning with numbers, so if you want to add custom entries at the > top call your file 08_localstuff or something. I've blogged about this > in relation to realtime kernels [1]. Perhaps you can modify that to > suit your needs. > > > If you just want to include some static text in grub.cfg you could > create a file like this (and make it executable): > > #!/bin/sh > > echo << EOF > > your stuff for grub.cfg goes here > > EOF > > > Hope this is at least a little helpful ⢁) > > > [1] http://funkyhat.org/2010/01/19/putting-rt-kernels-first-in-grub2/ > > -- > Matt Wheeler > m...@funkyhat.org > Thank you Matt :) 1. My fault not to backup grub.cfg or to switch to GRUB 1, resp. not to use GRUB 1 of my older Linux installs. 2. For the future I could backup grub.cfg or I should (have) read about GRUB 2 myself. So, okay, GRUB isn't that important, OTOH thank you for making it easier for me to keep the new GRUB. Anyway, I still wounder why GRUB does search for outdated GRUB 1 menu.lst's ;). Not the hint I was asking for, but OTOH a really good hint, because the new GRUB for sure will remove the old faithful GRUB. Thanx :) Ralf -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
Re: No audio - was: Real time for Ubuntu Studio 10.04 amd64
Sorry, I can't answer either of the questions you said you actually wanted help with but... On 28 July 2010 17:22, Ralf Mardorf wrote: > Hi :) > > today I tried Ubuntu Studio again, but I had no time to work on the > realtime kernel issue, because I got some new issues. > > 1. > > After updating apps and the non-realtime kernel, my manually edited > grub.cfg was automatically overwritten by a completely grotesque > grub.cfg, without an automatically backup of the original. So tomorrow > I'll have to do a hard job to make all my really existing kernels and > Linuxes bootable again and those who are already bootable needs to get > rid of those annoying boot splashes, unfortunately I didn't backup it > myself. Rather than editing /boot/grub/grub.cfg directly you need to edit or replace the files in /etc/grub.d and then call update-grub. The scripts in /etc/grub.d are executed in order, hence the filenames beginning with numbers, so if you want to add custom entries at the top call your file 08_localstuff or something. I've blogged about this in relation to realtime kernels [1]. Perhaps you can modify that to suit your needs. If you just want to include some static text in grub.cfg you could create a file like this (and make it executable): #!/bin/sh echo << EOF your stuff for grub.cfg goes here EOF Hope this is at least a little helpful ⢁) [1] http://funkyhat.org/2010/01/19/putting-rt-kernels-first-in-grub2/ -- Matt Wheeler m...@funkyhat.org -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
No audio - was: Real time for Ubuntu Studio 10.04 amd64
Hi :) today I tried Ubuntu Studio again, but I had no time to work on the realtime kernel issue, because I got some new issues. 1. After updating apps and the non-realtime kernel, my manually edited grub.cfg was automatically overwritten by a completely grotesque grub.cfg, without an automatically backup of the original. So tomorrow I'll have to do a hard job to make all my really existing kernels and Linuxes bootable again and those who are already bootable needs to get rid of those annoying boot splashes, unfortunately I didn't backup it myself. 2. I tried to play a MP3 by Movie Player, the PA setting meters show output, optional for one or the other of my two Terratec EWX 24/96 sound cards, but there was no sound hearable or visible for Envy24 control. 3. I installed KMPlayer, set it up to use JACK, run JACK, launched KMPLayer, pushed play and play stand still. Any hints how to solve issue 2 and 3 are welcome. Cheers! Ralf -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
