Re: USB interface stopped working after update
Hey Bruno, I have had a similar problem the last days and worked hard on it. I have teo different soundcards: RME Digi9636 and M-Audio Delta44. Both cards where found by lspci but not always with aplay -L. Mysterious... But yesterday I got it. I disabled ACPI with boot option noacpi in /etc/default/grub and just to be sure I disabled it in BIOS also. Now both cards work with. So please try the noacpi boot option. Regards Tim Bruno Tucunduva Ruviaro schrieb: >Thanks for the replies. > >a) The multiple soundcard hypothesis is out of the equation. I followed >Mike's suggestion and disabled the internal sound card in the BIOS. Now >there is only the USB interface, still no sound. >b) Tim: I followed the instructions from the German website (section >"Soundkarte is stumm" -- alsa reload, etc... this is the one you meant, >correct?), but no luck. > >So now only the PreSonus USB interface is being seen by the system (no >competing onboard card), Jack sees it & starts, but no sound comes out. >Recap: the USB interface works just fine if I boot from the live CD. >Very >mysterious... any other tip? > >Thank you so much guys, > >Bruno > >PS. Current outputs from terminal: > >ruviaro@ruviaro-OptiPlex-980:~$ aplay -l > List of PLAYBACK Hardware Devices >card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] > Subdevices: 0/1 > Subdevice #0: subdevice #0 >ruviaro@ruviaro-OptiPlex-980:~$ cat /proc/asound/modules > 1 snd_usb_audio >ruviaro@ruviaro-OptiPlex-980:~$ lspci -v | grep -A7 -i "audio" >ruviaro@ruviaro-OptiPlex-980:~$ sudo alsa reload >[sudo] password for ruviaro: >Unloading ALSA sound driver modules: snd-seq-dummy snd-usb-audio >snd-pcm >snd-page-alloc snd-hwdep snd-usbmidi-lib snd-seq-midi >snd-seq-midi-event >snd-seq snd-timer snd-rawmidi snd-seq-device. >Loading ALSA sound driver modules: snd-seq-dummy snd-usb-audio snd-pcm >snd-page-alloc snd-hwdep snd-usbmidi-lib snd-seq-midi >snd-seq-midi-event >snd-seq snd-timer snd-rawmidi snd-seq-device. >ruviaro@ruviaro-OptiPlex-980:~$ > > > >On Fri, Oct 12, 2012 at 1:21 PM, < >ubuntu-studio-users-requ...@lists.ubuntu.com> wrote: > >> Send Ubuntu-Studio-users mailing list submissions to >> ubuntu-studio-users@lists.ubuntu.com >> >> To subscribe or unsubscribe via the World Wide Web, visit >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >> or, via email, send a message with subject or body 'help' to >> ubuntu-studio-users-requ...@lists.ubuntu.com >> >> You can reach the person managing the list at >> ubuntu-studio-users-ow...@lists.ubuntu.com >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Ubuntu-Studio-users digest..." >> >> >> Today's Topics: >> >>1. Re: USB interface stopped working after update (Mike Holstein) >> 2. Re: USB interface stopped working after update (Tim Krone) >> >> >> >-- >> >> Message: 1 >> Date: Fri, 12 Oct 2012 16:20:42 -0400 >> From: Mike Holstein >> To: Ubuntu Studio Users Help and Discussion >> >> Subject: Re: USB interface stopped working after update >> Message-ID: >> < >> cadmglazhzjjwkwcq1ccdkayzzm1qxi-rl+q6tau1wv9x1mu...@mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> can you disable the internal sound card in the BIOS? even doing so >> temporarily will take the multiple sound cards out of the equation >for >> troubleshooting purposes >> On Oct 12, 2012 2:59 PM, "Bruno Tucunduva Ruviaro" >> wrote: >> >> > Thanks, >> > >> > I just tried that now (addressing the soundcard by name directly -- >> > hw:VSL), and still no sound out. Not sure it's a sound card order >> problem. >> > As you can see in the screenshot here ( >> > https://docs.google.com/open?id=0Bz9f9_VYwS1PeVdleVhvUUx5ZDg), Jack >> > always "recognizes" the sound card and starts without problem. But >no >> sound >> > goes anywhere in the PreSonus card. >> > >> > - If I switch back to the internal Intel sound card, sound comes >out of >> > the built-in speakers. >> > - If I pop in a Live Ubuntu Studio CD and boot from it, the >PreSonus >> > interface works just as expected, out of the box. >> > - If I try the PreSonus interface on a Mac, it also works. >> > >> > Any other troubleshooting tips grea
Re: USB interface stopped working after update
Hey Bruno, another option is to boot your kernel with acpi=off. You can do it with your grub configuration. Don't forget to update your new grub via sudo update-grup. Please be careful when doing this. Livesystems could have set this parameter standard - I don't know. Regards Tim Bruno Tucunduva Ruviaro schrieb: >Thanks, > >I just tried that now (addressing the soundcard by name directly -- >hw:VSL), and still no sound out. Not sure it's a sound card order >problem. >As you can see in the screenshot here ( >https://docs.google.com/open?id=0Bz9f9_VYwS1PeVdleVhvUUx5ZDg), Jack >always >"recognizes" the sound card and starts without problem. But no sound >goes >anywhere in the PreSonus card. > >- If I switch back to the internal Intel sound card, sound comes out of >the >built-in speakers. >- If I pop in a Live Ubuntu Studio CD and boot from it, the PreSonus >interface works just as expected, out of the box. >- If I try the PreSonus interface on a Mac, it also works. > >Any other troubleshooting tips greatly appreciated... thanks! > >Best, > >Bruno > >On Fri, Oct 12, 2012 at 11:36 AM, Ross Hamblin >wrote: >> >>> Hi... >>> >>> >>> On 13/10/12 07:20, Bruno Tucunduva Ruviaro wrote: >>> >>>> Hi Tim, >>>> >>>> Thanks for your reply. How exactly do I set a fixed order of >soundcards? >>>> I read somewhere that I should change >/etc/modprobe.d/alsa-base.conf -- >>>> is that really the case? >>>> >>>> Here's the output of some terminal commands: >>>> >>>> ruviaro@bruno-toshiba:~$ aplay -l >>>> List of PLAYBACK Hardware Devices >>>> card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD >Analog] >>>>Subdevices: 1/1 >>>>Subdevice #0: subdevice #0 >>>> card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] >>>>Subdevices: 1/1 >>>>Subdevice #0: subdevice #0 >>>> >>>> ruviaro@bruno-toshiba:~$ cat /proc/asound/modules >>>> 0 snd_hda_intel >>>> 1 snd_usb_audio >>>> >>>> ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" >>>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High >Definition >>>> Audio Controller (rev 02) >>>> Subsystem: Toshiba America Info Systems Device ff01 >>>> Flags: bus master, fast devsel, latency 0, IRQ 44 >>>> Memory at dc44 (64-bit, non-prefetchable) [size=16K] >>>> Capabilities: >>>> Kernel driver in use: snd_hda_intel >>>> Kernel modules: snd-hda-intel >>>> >>>> Thank you very much, >>>> >>>> Bruno >>>> >>>> >>>> On Fri, Oct 12, 2012 at 5:00 AM, >>>> > >>>> ><mailto:ubuntu-studio-users-**requ...@lists.ubuntu.com>> >>>> wrote: >>>> >>>> Send Ubuntu-Studio-users mailing list submissions to >>>> >ubuntu-studio-users@lists.**ubuntu.com >>>> ><mailto:ubuntu-studio-users@**lists.ubuntu.com >>>> > >>>> >>>> >>>> >>>> Message: 1 >>>> Date: Fri, 12 Oct 2012 06:29:39 +0200 >>>> From: Tim Krone mailto:t...@linux-daw.org>> >>>> >>>> To: Ubuntu Studio Users Help and Discussion >>>> > >>>> ><mailto:ubuntu-studio-users@**lists.ubuntu.com >>>> >> >>>> >>>> Subject: Re: USB interface stopped working after update >>>> Message-ID: >>> >29a3c2bee...@email.android.com >>>> ><mailto:f61eb0ed-df17-47fb-**ba49-29a3c2bee0c2@email.**android.com >>>> >> >>>> >>>> Content-Type: text/plain; charset="utf-8" >>>> >>>> Hey Bruno, >>>> >>>> have you got any other soundcard enabled on your machine like >the >>>> onboard chip? Try lspci | grep audio to find soundcards. >>>> So when there are more then one card or even midi interfaces >you >>>> must set a fixed card order. >>>> >>>> Possibly you can also try gladish instead of qjackctl. >>>> >>>> Regards >>>> Tim >>>> >>>> >>>> >>>> Bruno Tucunduva Ruviaro >>> <mailto
Re: USB interface stopped working after update
Oh yes, that was another idea I had too. Disable onboard sound in bios. Regards Tim Mike Holstein schrieb: >can you disable the internal sound card in the BIOS? even doing so >temporarily will take the multiple sound cards out of the equation for >troubleshooting purposes >On Oct 12, 2012 2:59 PM, "Bruno Tucunduva Ruviaro" >wrote: > >> Thanks, >> >> I just tried that now (addressing the soundcard by name directly -- >> hw:VSL), and still no sound out. Not sure it's a sound card order >problem. >> As you can see in the screenshot here ( >> https://docs.google.com/open?id=0Bz9f9_VYwS1PeVdleVhvUUx5ZDg), Jack >> always "recognizes" the sound card and starts without problem. But no >sound >> goes anywhere in the PreSonus card. >> >> - If I switch back to the internal Intel sound card, sound comes out >of >> the built-in speakers. >> - If I pop in a Live Ubuntu Studio CD and boot from it, the PreSonus >> interface works just as expected, out of the box. >> - If I try the PreSonus interface on a Mac, it also works. >> >> Any other troubleshooting tips greatly appreciated... thanks! >> >> Best, >> >> Bruno >> >> On Fri, Oct 12, 2012 at 11:36 AM, Ross Hamblin >wrote: >>> >>>> Hi... >>>> >>>> >>>> On 13/10/12 07:20, Bruno Tucunduva Ruviaro wrote: >>>> >>>>> Hi Tim, >>>>> >>>>> Thanks for your reply. How exactly do I set a fixed order of >soundcards? >>>>> I read somewhere that I should change >/etc/modprobe.d/alsa-base.conf -- >>>>> is that really the case? >>>>> >>>>> Here's the output of some terminal commands: >>>>> >>>>> ruviaro@bruno-toshiba:~$ aplay -l >>>>> List of PLAYBACK Hardware Devices >>>>> card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD >Analog] >>>>>Subdevices: 1/1 >>>>>Subdevice #0: subdevice #0 >>>>> card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] >>>>>Subdevices: 1/1 >>>>>Subdevice #0: subdevice #0 >>>>> >>>>> ruviaro@bruno-toshiba:~$ cat /proc/asound/modules >>>>> 0 snd_hda_intel >>>>> 1 snd_usb_audio >>>>> >>>>> ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" >>>>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High >Definition >>>>> Audio Controller (rev 02) >>>>> Subsystem: Toshiba America Info Systems Device ff01 >>>>> Flags: bus master, fast devsel, latency 0, IRQ 44 >>>>> Memory at dc44 (64-bit, non-prefetchable) [size=16K] >>>>> Capabilities: >>>>> Kernel driver in use: snd_hda_intel >>>>> Kernel modules: snd-hda-intel >>>>> >>>>> Thank you very much, >>>>> >>>>> Bruno >>>>> >>>>> >>>>> On Fri, Oct 12, 2012 at 5:00 AM, >>>>> > >>>>> ><mailto:ubuntu-studio-users-**requ...@lists.ubuntu.com>> >>>>> wrote: >>>>> >>>>> Send Ubuntu-Studio-users mailing list submissions to >>>>> >ubuntu-studio-users@lists.**ubuntu.com >>>>> ><mailto:ubuntu-studio-users@**lists.ubuntu.com >>>>> > >>>>> >>>>> >>>>> >>>>> Message: 1 >>>>> Date: Fri, 12 Oct 2012 06:29:39 +0200 >>>>> From: Tim Krone mailto:t...@linux-daw.org>> >>>>> >>>>> To: Ubuntu Studio Users Help and Discussion >>>>> > >>>>> ><mailto:ubuntu-studio-users@**lists.ubuntu.com >>>>> >> >>>>> >>>>> Subject: Re: USB interface stopped working after update >>>>> Message-ID: >>>> >29a3c2bee...@email.android.com >>>>> ><mailto:f61eb0ed-df17-47fb-**ba49-29a3c2bee0c2@email.**android.com >>>>> >> >>>>> >>>>> Content-Type: text/plain; charset="utf-8" >>>>> >>>>> Hey Bruno, >>>>> >>>>> have you got any other soundcard enabled on your machine like >the >>>>> onboard chip? Try lspci | grep audio to find so
Re: USB interface stopped working after update
Hey Bruno, I only have only a german resource for that but possibly google translate helps: http://wiki.ubuntuusers.de/Soundkarten_konfigurieren#Soundkarte-ist-stumm-obwohl-sie-unter-dem-Livesystem-funktioniert-und-auch-vom-System-erkannt-wurde That fits exactly to your problem. Cheers Tim Bruno Tucunduva Ruviaro schrieb: >Hi Tim, > >Thanks for your reply. How exactly do I set a fixed order of >soundcards? I >read somewhere that I should change /etc/modprobe.d/alsa-base.conf -- >is >that really the case? > >Here's the output of some terminal commands: > >ruviaro@bruno-toshiba:~$ aplay -l > List of PLAYBACK Hardware Devices >card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD >Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 >card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > >ruviaro@bruno-toshiba:~$ cat /proc/asound/modules > 0 snd_hda_intel > 1 snd_usb_audio > >ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" >00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High >Definition >Audio Controller (rev 02) >Subsystem: Toshiba America Info Systems Device ff01 >Flags: bus master, fast devsel, latency 0, IRQ 44 >Memory at dc44 (64-bit, non-prefetchable) [size=16K] >Capabilities: >Kernel driver in use: snd_hda_intel >Kernel modules: snd-hda-intel > >Thank you very much, > >Bruno > > >On Fri, Oct 12, 2012 at 5:00 AM, < >ubuntu-studio-users-requ...@lists.ubuntu.com> wrote: > >> Send Ubuntu-Studio-users mailing list submissions to >> ubuntu-studio-users@lists.ubuntu.com >> >> >> Message: 1 >> Date: Fri, 12 Oct 2012 06:29:39 +0200 >> From: Tim Krone >> To: Ubuntu Studio Users Help and Discussion >> >> Subject: Re: USB interface stopped working after update >> Message-ID: >> Content-Type: text/plain; charset="utf-8" >> >> Hey Bruno, >> >> have you got any other soundcard enabled on your machine like the >onboard >> chip? Try lspci | grep audio to find soundcards. >> So when there are more then one card or even midi interfaces you must >set >> a fixed card order. >> >> Possibly you can also try gladish instead of qjackctl. >> >> Regards >> Tim >> >> >> >> Bruno Tucunduva Ruviaro schrieb: >> >> >Hi, >> > >> >Back to an unresolved issue I posted sometime ago. I did some more >> >tests this week and found out the following (I did this test twice >and >> >obtained the same results in two different machines): >> > >> >1) I install Ubuntu Studio 12.04 from scratch; >> >2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open >Jack, >> >Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it all >> >works and I get sound out. Happy! >> >3) I then turn off the computer and the interface. Then turn them >back >> >on; >> >4) I repeat the steps of #2: open jack, jack sees interface OK, I >start >> >jack, I start Hydrogen, open a Demo, and... no more sound comes out >of >> >the interface. I don't even see the meter lights anymore. Still, >Jack >> >recognizes it and starts correctly. But no sound anymore. >> > >> >With this, I rephrase my original question. The problem was not a >> >recent software update, as I had thought: now even with a clean, >fresh >> >install of Ubuntu Studio, the interface works the first time, and >after >> >rebooting the computer, it never works again. >> > >> >I've tested the audio interface on a Mac computer and it is working >(in >> >fact I bought this PreSonus recently, it's brand new). If I boot >Ubuntu >> >studio from a live CD, the interface works again. >> > >> >Any ideas on how to solve this mystery? >> > >> >Thank you very much for any help, >> > >> >Bruno >> > >> >- Original Message - >> >From: "Bruno Tucunduva Ruviaro" >> >To: ubuntu-studio-users@lists.ubuntu.com >> >Cc: bruvi...@scu.edu >> >Sent: Wednesday, September 26, 2012 11:48:08 AM >> >Subject: Re: USB interface stopped working after update >> > >> >Hi, >> > >> >I didn't use synaptic, but I copy below the contents of history.log >> >from /var/log/apt/ >> >The interface was working fine until 2012-09-24. After those updates >it >> >stopped working. &g
Re: USB interface stopped working after update
can you disable the internal sound card in the BIOS? even doing so temporarily will take the multiple sound cards out of the equation for troubleshooting purposes On Oct 12, 2012 2:59 PM, "Bruno Tucunduva Ruviaro" wrote: > Thanks, > > I just tried that now (addressing the soundcard by name directly -- > hw:VSL), and still no sound out. Not sure it's a sound card order problem. > As you can see in the screenshot here ( > https://docs.google.com/open?id=0Bz9f9_VYwS1PeVdleVhvUUx5ZDg), Jack > always "recognizes" the sound card and starts without problem. But no sound > goes anywhere in the PreSonus card. > > - If I switch back to the internal Intel sound card, sound comes out of > the built-in speakers. > - If I pop in a Live Ubuntu Studio CD and boot from it, the PreSonus > interface works just as expected, out of the box. > - If I try the PreSonus interface on a Mac, it also works. > > Any other troubleshooting tips greatly appreciated... thanks! > > Best, > > Bruno > > On Fri, Oct 12, 2012 at 11:36 AM, Ross Hamblin wrote: >> >>> Hi... >>> >>> >>> On 13/10/12 07:20, Bruno Tucunduva Ruviaro wrote: >>> >>>> Hi Tim, >>>> >>>> Thanks for your reply. How exactly do I set a fixed order of soundcards? >>>> I read somewhere that I should change /etc/modprobe.d/alsa-base.conf -- >>>> is that really the case? >>>> >>>> Here's the output of some terminal commands: >>>> >>>> ruviaro@bruno-toshiba:~$ aplay -l >>>> List of PLAYBACK Hardware Devices >>>> card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD Analog] >>>>Subdevices: 1/1 >>>>Subdevice #0: subdevice #0 >>>> card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] >>>>Subdevices: 1/1 >>>>Subdevice #0: subdevice #0 >>>> >>>> ruviaro@bruno-toshiba:~$ cat /proc/asound/modules >>>> 0 snd_hda_intel >>>> 1 snd_usb_audio >>>> >>>> ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" >>>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition >>>> Audio Controller (rev 02) >>>> Subsystem: Toshiba America Info Systems Device ff01 >>>> Flags: bus master, fast devsel, latency 0, IRQ 44 >>>> Memory at dc44 (64-bit, non-prefetchable) [size=16K] >>>> Capabilities: >>>> Kernel driver in use: snd_hda_intel >>>> Kernel modules: snd-hda-intel >>>> >>>> Thank you very much, >>>> >>>> Bruno >>>> >>>> >>>> On Fri, Oct 12, 2012 at 5:00 AM, >>>> >>>> <mailto:ubuntu-studio-users-**requ...@lists.ubuntu.com>> >>>> wrote: >>>> >>>> Send Ubuntu-Studio-users mailing list submissions to >>>> >>>> ubuntu-studio-users@lists.**ubuntu.com >>>> >>>> <mailto:ubuntu-studio-users@**lists.ubuntu.com >>>> > >>>> >>>> >>>> >>>> Message: 1 >>>> Date: Fri, 12 Oct 2012 06:29:39 +0200 >>>> From: Tim Krone mailto:t...@linux-daw.org>> >>>> >>>> To: Ubuntu Studio Users Help and Discussion >>>> >>>> >>>> >>>> <mailto:ubuntu-studio-users@**lists.ubuntu.com >>>> >> >>>> >>>> Subject: Re: USB interface stopped working after update >>>> Message-ID: >>> 29a3c2bee...@email.android.com >>>> >>>> <mailto:f61eb0ed-df17-47fb-**ba49-29a3c2bee0c2@email.**android.com >>>> >> >>>> >>>> Content-Type: text/plain; charset="utf-8" >>>> >>>> Hey Bruno, >>>> >>>> have you got any other soundcard enabled on your machine like the >>>> onboard chip? Try lspci | grep audio to find soundcards. >>>> So when there are more then one card or even midi interfaces you >>>> must set a fixed card order. >>>> >>>> Possibly you can also try gladish instead of qjackctl. >>>> >>>> Regards >>>> Tim >>>> >>>> >>>> >>>> Bruno Tucunduva Ruviaro >>> <mailto:ruvi...@stanford.edu>> schrieb: >>>> >
Re: USB interface stopped working after update
I understood it should be done using the /etc/asound.conf for all users on any machine and the hidden config file in the user's home directory that is the equivalent of asound.conf but for specific user. That is if you are using ALSA On 10/12/2012 07:20 PM, Bruno Tucunduva Ruviaro wrote: Hi Tim, Thanks for your reply. How exactly do I set a fixed order of soundcards? I read somewhere that I should change /etc/modprobe.d/alsa-base.conf -- is that really the case? Here's the output of some terminal commands: ruviaro@bruno-toshiba:~$ aplay -l List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 ruviaro@bruno-toshiba:~$ cat /proc/asound/modules 0 snd_hda_intel 1 snd_usb_audio ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Toshiba America Info Systems Device ff01 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at dc44 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Thank you very much, Bruno On Fri, Oct 12, 2012 at 5:00 AM, <mailto:ubuntu-studio-users-requ...@lists.ubuntu.com>> wrote: Send Ubuntu-Studio-users mailing list submissions to ubuntu-studio-users@lists.ubuntu.com <mailto:ubuntu-studio-users@lists.ubuntu.com> Message: 1 Date: Fri, 12 Oct 2012 06:29:39 +0200 From: Tim Krone mailto:t...@linux-daw.org>> To: Ubuntu Studio Users Help and Discussion mailto:ubuntu-studio-users@lists.ubuntu.com>> Subject: Re: USB interface stopped working after update Message-ID: mailto:f61eb0ed-df17-47fb-ba49-29a3c2bee...@email.android.com>> Content-Type: text/plain; charset="utf-8" Hey Bruno, have you got any other soundcard enabled on your machine like the onboard chip? Try lspci | grep audio to find soundcards. So when there are more then one card or even midi interfaces you must set a fixed card order. Possibly you can also try gladish instead of qjackctl. Regards Tim Bruno Tucunduva Ruviaro mailto:ruvi...@stanford.edu>> schrieb: >Hi, > >Back to an unresolved issue I posted sometime ago. I did some more >tests this week and found out the following (I did this test twice and >obtained the same results in two different machines): > >1) I install Ubuntu Studio 12.04 from scratch; >2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open Jack, >Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it all >works and I get sound out. Happy! >3) I then turn off the computer and the interface. Then turn them back >on; >4) I repeat the steps of #2: open jack, jack sees interface OK, I start >jack, I start Hydrogen, open a Demo, and... no more sound comes out of >the interface. I don't even see the meter lights anymore. Still, Jack >recognizes it and starts correctly. But no sound anymore. > >With this, I rephrase my original question. The problem was not a >recent software update, as I had thought: now even with a clean, fresh >install of Ubuntu Studio, the interface works the first time, and after >rebooting the computer, it never works again. > >I've tested the audio interface on a Mac computer and it is working (in >fact I bought this PreSonus recently, it's brand new). If I boot Ubuntu >studio from a live CD, the interface works again. > >Any ideas on how to solve this mystery? > >Thank you very much for any help, > >Bruno > >- Original Message - >From: "Bruno Tucunduva Ruviaro" mailto:ruvi...@stanford.edu>> >To: ubuntu-studio-users@lists.ubuntu.com <mailto:ubuntu-studio-users@lists.ubuntu.com> >Cc: bruvi...@scu.edu <mailto:bruvi...@scu.edu> >Sent: Wednesday, September 26, 2012 11:48:08 AM >Subject: Re: USB interface stopped working after update > >Hi, > >I didn't use synaptic, but I copy below the contents of history.log >from /var/log/apt/ >The interface was working fine until 2012-09-24. After those updates it >stopped working. >Thanks for any help, > >Bruno > >- - - > >Contents of history.log: > >Start-Date: 2012-09-20 14 :18:37 >Commandline: aptdaemon role='role-commit-packages' s
Re: USB interface stopped working after update
Thanks, I just tried that now (addressing the soundcard by name directly -- hw:VSL), and still no sound out. Not sure it's a sound card order problem. As you can see in the screenshot here ( https://docs.google.com/open?id=0Bz9f9_VYwS1PeVdleVhvUUx5ZDg), Jack always "recognizes" the sound card and starts without problem. But no sound goes anywhere in the PreSonus card. - If I switch back to the internal Intel sound card, sound comes out of the built-in speakers. - If I pop in a Live Ubuntu Studio CD and boot from it, the PreSonus interface works just as expected, out of the box. - If I try the PreSonus interface on a Mac, it also works. Any other troubleshooting tips greatly appreciated... thanks! Best, Bruno On Fri, Oct 12, 2012 at 11:36 AM, Ross Hamblin wrote: > >> Hi... >> >> >> On 13/10/12 07:20, Bruno Tucunduva Ruviaro wrote: >> >>> Hi Tim, >>> >>> Thanks for your reply. How exactly do I set a fixed order of soundcards? >>> I read somewhere that I should change /etc/modprobe.d/alsa-base.conf -- >>> is that really the case? >>> >>> Here's the output of some terminal commands: >>> >>> ruviaro@bruno-toshiba:~$ aplay -l >>> List of PLAYBACK Hardware Devices >>> card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD Analog] >>>Subdevices: 1/1 >>>Subdevice #0: subdevice #0 >>> card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] >>>Subdevices: 1/1 >>>Subdevice #0: subdevice #0 >>> >>> ruviaro@bruno-toshiba:~$ cat /proc/asound/modules >>> 0 snd_hda_intel >>> 1 snd_usb_audio >>> >>> ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" >>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition >>> Audio Controller (rev 02) >>> Subsystem: Toshiba America Info Systems Device ff01 >>> Flags: bus master, fast devsel, latency 0, IRQ 44 >>> Memory at dc44 (64-bit, non-prefetchable) [size=16K] >>> Capabilities: >>> Kernel driver in use: snd_hda_intel >>> Kernel modules: snd-hda-intel >>> >>> Thank you very much, >>> >>> Bruno >>> >>> >>> On Fri, Oct 12, 2012 at 5:00 AM, >>> >>> <mailto:ubuntu-studio-users-**requ...@lists.ubuntu.com>> >>> wrote: >>> >>> Send Ubuntu-Studio-users mailing list submissions to >>> >>> ubuntu-studio-users@lists.**ubuntu.com >>> >>> <mailto:ubuntu-studio-users@**lists.ubuntu.com >>> > >>> >>> >>> >>> Message: 1 >>> Date: Fri, 12 Oct 2012 06:29:39 +0200 >>> From: Tim Krone mailto:t...@linux-daw.org>> >>> >>> To: Ubuntu Studio Users Help and Discussion >>> >>> >>> >>> <mailto:ubuntu-studio-users@**lists.ubuntu.com >>> >> >>> >>> Subject: Re: USB interface stopped working after update >>> Message-ID: >> 29a3c2bee...@email.android.com >>> >>> <mailto:f61eb0ed-df17-47fb-**ba49-29a3c2bee0c2@email.**android.com >>> >> >>> >>> Content-Type: text/plain; charset="utf-8" >>> >>> Hey Bruno, >>> >>> have you got any other soundcard enabled on your machine like the >>> onboard chip? Try lspci | grep audio to find soundcards. >>> So when there are more then one card or even midi interfaces you >>> must set a fixed card order. >>> >>> Possibly you can also try gladish instead of qjackctl. >>> >>> Regards >>> Tim >>> >>> >>> >>> Bruno Tucunduva Ruviaro >> <mailto:ruvi...@stanford.edu>> schrieb: >>> >>> >>> >Hi, >>> > >>> >Back to an unresolved issue I posted sometime ago. I did some more >>> >tests this week and found out the following (I did this test twice >>> and >>> >obtained the same results in two different machines): >>> > >>> >1) I install Ubuntu Studio 12.04 from scratch; >>> >2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open >>> Jack, >>> >Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it >>> all >>> >works and I get sound out. Happy! >>> >3) I t
Re: USB interface stopped working after update
Hi Tim, Thanks for your reply. How exactly do I set a fixed order of soundcards? I read somewhere that I should change /etc/modprobe.d/alsa-base.conf -- is that really the case? Here's the output of some terminal commands: ruviaro@bruno-toshiba:~$ aplay -l List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: VSL [AudioBox 1818 VSL], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 ruviaro@bruno-toshiba:~$ cat /proc/asound/modules 0 snd_hda_intel 1 snd_usb_audio ruviaro@bruno-toshiba:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Toshiba America Info Systems Device ff01 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at dc44 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Thank you very much, Bruno On Fri, Oct 12, 2012 at 5:00 AM, < ubuntu-studio-users-requ...@lists.ubuntu.com> wrote: > Send Ubuntu-Studio-users mailing list submissions to > ubuntu-studio-users@lists.ubuntu.com > > > Message: 1 > Date: Fri, 12 Oct 2012 06:29:39 +0200 > From: Tim Krone > To: Ubuntu Studio Users Help and Discussion > > Subject: Re: USB interface stopped working after update > Message-ID: > Content-Type: text/plain; charset="utf-8" > > Hey Bruno, > > have you got any other soundcard enabled on your machine like the onboard > chip? Try lspci | grep audio to find soundcards. > So when there are more then one card or even midi interfaces you must set > a fixed card order. > > Possibly you can also try gladish instead of qjackctl. > > Regards > Tim > > > > Bruno Tucunduva Ruviaro schrieb: > > >Hi, > > > >Back to an unresolved issue I posted sometime ago. I did some more > >tests this week and found out the following (I did this test twice and > >obtained the same results in two different machines): > > > >1) I install Ubuntu Studio 12.04 from scratch; > >2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open Jack, > >Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it all > >works and I get sound out. Happy! > >3) I then turn off the computer and the interface. Then turn them back > >on; > >4) I repeat the steps of #2: open jack, jack sees interface OK, I start > >jack, I start Hydrogen, open a Demo, and... no more sound comes out of > >the interface. I don't even see the meter lights anymore. Still, Jack > >recognizes it and starts correctly. But no sound anymore. > > > >With this, I rephrase my original question. The problem was not a > >recent software update, as I had thought: now even with a clean, fresh > >install of Ubuntu Studio, the interface works the first time, and after > >rebooting the computer, it never works again. > > > >I've tested the audio interface on a Mac computer and it is working (in > >fact I bought this PreSonus recently, it's brand new). If I boot Ubuntu > >studio from a live CD, the interface works again. > > > >Any ideas on how to solve this mystery? > > > >Thank you very much for any help, > > > >Bruno > > > >- Original Message - > >From: "Bruno Tucunduva Ruviaro" > >To: ubuntu-studio-users@lists.ubuntu.com > >Cc: bruvi...@scu.edu > >Sent: Wednesday, September 26, 2012 11:48:08 AM > >Subject: Re: USB interface stopped working after update > > > >Hi, > > > >I didn't use synaptic, but I copy below the contents of history.log > >from /var/log/apt/ > >The interface was working fine until 2012-09-24. After those updates it > >stopped working. > >Thanks for any help, > > > >Bruno > > > >- - - > > > >Contents of history.log: > > > >Start-Date: 2012-09-20 14:18:37 > >Commandline: aptdaemon role='role-commit-packages' sender=':1.115' > >Install: libframe6:i386 (2.2.4-0ubuntu0.12.04.1), libgeis1:i386 > >(2.2.9.2-0ubuntu1), libgrail5:i386 (3.0.6-0ubuntu0.12.04.01, automatic) > >Upgrade: gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), > >bind9-host:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > >dnsutils:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > >libart-2.0-2:i386 (2.3.21-1, 2.3.21-1ubuntu0.1), totem-plugins:i386 > >(3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), evince-common:i386 > >(3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4),
Re: USB interface stopped working after update
Hey Bruno, have you got any other soundcard enabled on your machine like the onboard chip? Try lspci | grep audio to find soundcards. So when there are more then one card or even midi interfaces you must set a fixed card order. Possibly you can also try gladish instead of qjackctl. Regards Tim Bruno Tucunduva Ruviaro schrieb: >Hi, > >Back to an unresolved issue I posted sometime ago. I did some more >tests this week and found out the following (I did this test twice and >obtained the same results in two different machines): > >1) I install Ubuntu Studio 12.04 from scratch; >2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open Jack, >Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it all >works and I get sound out. Happy! >3) I then turn off the computer and the interface. Then turn them back >on; >4) I repeat the steps of #2: open jack, jack sees interface OK, I start >jack, I start Hydrogen, open a Demo, and... no more sound comes out of >the interface. I don't even see the meter lights anymore. Still, Jack >recognizes it and starts correctly. But no sound anymore. > >With this, I rephrase my original question. The problem was not a >recent software update, as I had thought: now even with a clean, fresh >install of Ubuntu Studio, the interface works the first time, and after >rebooting the computer, it never works again. > >I've tested the audio interface on a Mac computer and it is working (in >fact I bought this PreSonus recently, it's brand new). If I boot Ubuntu >studio from a live CD, the interface works again. > >Any ideas on how to solve this mystery? > >Thank you very much for any help, > >Bruno > >- Original Message - >From: "Bruno Tucunduva Ruviaro" >To: ubuntu-studio-users@lists.ubuntu.com >Cc: bruvi...@scu.edu >Sent: Wednesday, September 26, 2012 11:48:08 AM >Subject: Re: USB interface stopped working after update > >Hi, > >I didn't use synaptic, but I copy below the contents of history.log >from /var/log/apt/ >The interface was working fine until 2012-09-24. After those updates it >stopped working. >Thanks for any help, > >Bruno > >- - - > >Contents of history.log: > >Start-Date: 2012-09-20 14:18:37 >Commandline: aptdaemon role='role-commit-packages' sender=':1.115' >Install: libframe6:i386 (2.2.4-0ubuntu0.12.04.1), libgeis1:i386 >(2.2.9.2-0ubuntu1), libgrail5:i386 (3.0.6-0ubuntu0.12.04.01, automatic) >Upgrade: gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), >bind9-host:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), >dnsutils:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), >libart-2.0-2:i386 (2.3.21-1, 2.3.21-1ubuntu0.1), totem-plugins:i386 >(3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), evince-common:i386 >(3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), libdns81:i386 >(9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), totem-common:i386 >(3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), libtotem0:i386 (3.0.1-0ubuntu21, >3.0.1-0ubuntu21.1), apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), >python3.2:i386 (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libisccc80:i386 >(9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), >isc-dhcp-client:i386 (4.1.ESV-R4-0ubuntu5.2, 4.1.ESV-R4-0ubuntu5.5), >libgrip0:i386 (0.3.4-0ubuntu2~ubuntu12.04.1, 0.3.5-0ubuntu1~12.04.1), >firefox-globalmenu:i386 (15.0+build1-0ubuntu0.12.04.1, >15.0.1+build1-0ubuntu0.12.04.1), firefox:i386 >(15.0+build1-0ubuntu0.12.04.1, >15.0.1+build1-0ubuntu0.12.04.1), liblwres80:i386 >(9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), libevince3-3:i386 >(3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), libpython3.2:i386 >(3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libbind9-80:i386 >(9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), >firefox-gnome-support:i386 (15.0+build1-0ubuntu0.12.04.1, >15.0.1+build1-0ubuntu0.12.04.1), python-problem-report:i386 >(2.0.1-0ubuntu12, 2.0.1-0ubuntu13), evince:i386 (3.4.0-0ubuntu1.3, >3.4.0-0ubuntu1.4), isc-dhcp-common:i386 (4.1.ESV-R4-0ubuntu5.2, >4.1.ESV-R4-0ubuntu5.5), gimp:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), >libgimp2.0:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), libisccfg82:i386 >(9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), >firefox-locale-en:i386 (15.0+build1-0ubuntu0.12.04.1, >15.0.1+build1-0ubuntu0.12.04.1), gpgv:i386 (1.4.11-3ubuntu2, >1.4.11-3ubuntu2.1), python3.2-minimal:i386 (3.2.3-0ubuntu3, >3.2.3-0ubuntu3.1), resolvconf:i386 (1.63ubuntu15, 1.63ubuntu16), >python-apport:i386 >(2.0.1-0ubuntu12, 2.0.1-0ubuntu13), libisc83:i386 >(9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), totem:i386 >(3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), xserver-xorg-input-synaptics:i386 >(1.6.2-1ubuntu1~precise1, 1.6.2-1ubuntu1~precise2), gimp-da
Re: USB interface stopped working after update
Can you disable your internal soundcard? I would try booting the original kernel if you are upgrading it after install... On Oct 11, 2012 7:42 PM, "Bruno Tucunduva Ruviaro" wrote: > Hi, > > Back to an unresolved issue I posted sometime ago. I did some more tests > this week and found out the following (I did this test twice and obtained > the same results in two different machines): > > 1) I install Ubuntu Studio 12.04 from scratch; > 2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open Jack, > Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it all works > and I get sound out. Happy! > 3) I then turn off the computer and the interface. Then turn them back on; > 4) I repeat the steps of #2: open jack, jack sees interface OK, I start > jack, I start Hydrogen, open a Demo, and... no more sound comes out of the > interface. I don't even see the meter lights anymore. Still, Jack > recognizes it and starts correctly. But no sound anymore. > > With this, I rephrase my original question. The problem was not a recent > software update, as I had thought: now even with a clean, fresh install of > Ubuntu Studio, the interface works the first time, and after rebooting the > computer, it never works again. > > I've tested the audio interface on a Mac computer and it is working (in > fact I bought this PreSonus recently, it's brand new). If I boot Ubuntu > studio from a live CD, the interface works again. > > Any ideas on how to solve this mystery? > > Thank you very much for any help, > > Bruno > > - Original Message - > From: "Bruno Tucunduva Ruviaro" > To: ubuntu-studio-users@lists.ubuntu.com > Cc: bruvi...@scu.edu > Sent: Wednesday, September 26, 2012 11:48:08 AM > Subject: Re: USB interface stopped working after update > > Hi, > > I didn't use synaptic, but I copy below the contents of history.log from > /var/log/apt/ > The interface was working fine until 2012-09-24. After those updates it > stopped working. > Thanks for any help, > > Bruno > > - - - > > Contents of history.log: > > Start-Date: 2012-09-20 14:18:37 > Commandline: aptdaemon role='role-commit-packages' sender=':1.115' > Install: libframe6:i386 (2.2.4-0ubuntu0.12.04.1), libgeis1:i386 > (2.2.9.2-0ubuntu1), libgrail5:i386 (3.0.6-0ubuntu0.12.04.01, automatic) > Upgrade: gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), > bind9-host:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > dnsutils:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > libart-2.0-2:i386 (2.3.21-1, 2.3.21-1ubuntu0.1), totem-plugins:i386 > (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), evince-common:i386 (3.4.0-0ubuntu1.3, > 3.4.0-0ubuntu1.4), libdns81:i386 (9.8.1.dfsg.P1-4ubuntu0.2, > 9.8.1.dfsg.P1-4ubuntu0.3), totem-common:i386 (3.0.1-0ubuntu21, > 3.0.1-0ubuntu21.1), libtotem0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), > apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), python3.2:i386 > (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libisccc80:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), isc-dhcp-client:i386 > (4.1.ESV-R4-0ubuntu5.2, 4.1.ESV-R4-0ubuntu5.5), libgrip0:i386 > (0.3.4-0ubuntu2~ubuntu12.04.1, 0.3.5-0ubuntu1~12.04.1), > firefox-globalmenu:i386 (15.0+build1-0ubuntu0.12.04.1, > 15.0.1+build1-0ubuntu0.12.04.1), firefox:i386 > (15.0+build1-0ubuntu0.12.04.1, 15.0.1+build1-0ubuntu0.12.04.1), > liblwres80:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > libevince3-3:i386 (3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), libpython3.2:i386 > (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libbind9-80:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > firefox-gnome-support:i386 (15.0+build1-0ubuntu0.12.04.1, > 15.0.1+build1-0ubuntu0.12.04.1), python-problem-report:i386 > (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), evince:i386 (3.4.0-0ubuntu1.3, > 3.4.0-0ubuntu1.4), isc-dhcp-common:i386 (4.1.ESV-R4-0ubuntu5.2, > 4.1.ESV-R4-0ubuntu5.5), gimp:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), > libgimp2.0:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), libisccfg82:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > firefox-locale-en:i386 (15.0+build1-0ubuntu0.12.04.1, > 15.0.1+build1-0ubuntu0.12.04.1), gpgv:i386 (1.4.11-3ubuntu2, > 1.4.11-3ubuntu2.1), python3.2-minimal:i386 (3.2.3-0ubuntu3, > 3.2.3-0ubuntu3.1), resolvconf:i386 (1.63ubuntu15, 1.63ubuntu16), > python-apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), libisc83:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), totem:i386 > (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), xserver-xorg-input-synaptics:i386 > (1.6.2-1ubuntu1~precise1, 1.6.2-1ubuntu1~precise2), gimp-data:i386 > (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), apport-gtk:i386 (2.0.1-0ubuntu
Re: USB interface stopped working after update
Hi, Back to an unresolved issue I posted sometime ago. I did some more tests this week and found out the following (I did this test twice and obtained the same results in two different machines): 1) I install Ubuntu Studio 12.04 from scratch; 2) I try it with my PreSonus AudioBox 1818VSL USB interface. Open Jack, Jack sees interface, Start Jack, Start Hydrogen, Play a Demo, it all works and I get sound out. Happy! 3) I then turn off the computer and the interface. Then turn them back on; 4) I repeat the steps of #2: open jack, jack sees interface OK, I start jack, I start Hydrogen, open a Demo, and... no more sound comes out of the interface. I don't even see the meter lights anymore. Still, Jack recognizes it and starts correctly. But no sound anymore. With this, I rephrase my original question. The problem was not a recent software update, as I had thought: now even with a clean, fresh install of Ubuntu Studio, the interface works the first time, and after rebooting the computer, it never works again. I've tested the audio interface on a Mac computer and it is working (in fact I bought this PreSonus recently, it's brand new). If I boot Ubuntu studio from a live CD, the interface works again. Any ideas on how to solve this mystery? Thank you very much for any help, Bruno - Original Message - From: "Bruno Tucunduva Ruviaro" To: ubuntu-studio-users@lists.ubuntu.com Cc: bruvi...@scu.edu Sent: Wednesday, September 26, 2012 11:48:08 AM Subject: Re: USB interface stopped working after update Hi, I didn't use synaptic, but I copy below the contents of history.log from /var/log/apt/ The interface was working fine until 2012-09-24. After those updates it stopped working. Thanks for any help, Bruno - - - Contents of history.log: Start-Date: 2012-09-20 14:18:37 Commandline: aptdaemon role='role-commit-packages' sender=':1.115' Install: libframe6:i386 (2.2.4-0ubuntu0.12.04.1), libgeis1:i386 (2.2.9.2-0ubuntu1), libgrail5:i386 (3.0.6-0ubuntu0.12.04.01, automatic) Upgrade: gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), bind9-host:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), dnsutils:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), libart-2.0-2:i386 (2.3.21-1, 2.3.21-1ubuntu0.1), totem-plugins:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), evince-common:i386 (3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), libdns81:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), totem-common:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), libtotem0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), python3.2:i386 (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libisccc80:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), isc-dhcp-client:i386 (4.1.ESV-R4-0ubuntu5.2, 4.1.ESV-R4-0ubuntu5.5), libgrip0:i386 (0.3.4-0ubuntu2~ubuntu12.04.1, 0.3.5-0ubuntu1~12.04.1), firefox-globalmenu:i386 (15.0+build1-0ubuntu0.12.04.1, 15.0.1+build1-0ubuntu0.12.04.1), firefox:i386 (15.0+build1-0ubuntu0.12.04.1, 15.0.1+build1-0ubuntu0.12.04.1), liblwres80:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), libevince3-3:i386 (3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), libpython3.2:i386 (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libbind9-80:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), firefox-gnome-support:i386 (15.0+build1-0ubuntu0.12.04.1, 15.0.1+build1-0ubuntu0.12.04.1), python-problem-report:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), evince:i386 (3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), isc-dhcp-common:i386 (4.1.ESV-R4-0ubuntu5.2, 4.1.ESV-R4-0ubuntu5.5), gimp:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), libgimp2.0:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), libisccfg82:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), firefox-locale-en:i386 (15.0+build1-0ubuntu0.12.04.1, 15.0.1+build1-0ubuntu0.12.04.1), gpgv:i386 (1.4.11-3ubuntu2, 1.4.11-3ubuntu2.1), python3.2-minimal:i386 (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), resolvconf:i386 (1.63ubuntu15, 1.63ubuntu16), python-apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), libisc83:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), totem:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), xserver-xorg-input-synaptics:i386 (1.6.2-1ubuntu1~precise1, 1.6.2-1ubuntu1~precise2), gimp-data:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), apport-gtk:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), totem-mozilla:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), gnupg:i386 (1.4.11-3ubuntu2, 1.4.11-3ubuntu2.1) End-Date: 2012-09-20 14:20:51 Start-Date: 2012-09-20 14:23:42 Commandline: aptdaemon role='role-commit-packages' sender=':1.115' Upgrade: libgnomevfs2-0:i386 (2.24.4-1ubuntu2, 2.24.4-1ubuntu2.1), libdbus-1-3:i386 (1.4.18-1ubuntu1, 1.4.18-1ubuntu1.1), dbus:i386 (1.4.18-1ubuntu1, 1.4.18-1ubuntu1.1), libgnomevfs2-extra:i386 (2.24.4-1ubuntu2, 2.24.4-1ubuntu2.1), tzdata:i386 (2012e-0ubuntu0.12.04, 2012e-0ubuntu0.12.04.1), dbus-x11:i386 (
Re: USB interface stopped working after update
On Wed, 2012-09-26 at 11:48 -0700, Bruno Tucunduva Ruviaro wrote: > Hi, > > I didn't use synaptic, but I copy below the contents of history.log from > /var/log/apt/ > The interface was working fine until 2012-09-24. After those updates it > stopped working. > Thanks for any help, > > Bruno > > - - - > > Contents of history.log: > > Start-Date: 2012-09-20 14:18:37 > Commandline: aptdaemon role='role-commit-packages' sender=':1.115' > Install: libframe6:i386 (2.2.4-0ubuntu0.12.04.1), libgeis1:i386 > (2.2.9.2-0ubuntu1), libgrail5:i386 (3.0.6-0ubuntu0.12.04.01, automatic) > Upgrade: gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), > bind9-host:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > dnsutils:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > libart-2.0-2:i386 (2.3.21-1, 2.3.21-1ubuntu0.1), totem-plugins:i386 > (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), evince-common:i386 (3.4.0-0ubuntu1.3, > 3.4.0-0ubuntu1.4), libdns81:i386 (9.8.1.dfsg.P1-4ubuntu0.2, > 9.8.1.dfsg.P1-4ubuntu0.3), totem-common:i386 (3.0.1-0ubuntu21, > 3.0.1-0ubuntu21.1), libtotem0:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), > apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), python3.2:i386 > (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), libisccc80:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), isc-dhcp-client:i386 > (4.1.ESV-R4-0ubuntu5.2, 4.1.ESV-R4-0ubuntu5.5), libgrip0:i386 > (0.3.4-0ubuntu2~ubuntu12.04.1, 0.3.5-0ubuntu1~12.04.1), > firefox-globalmenu:i386 (15.0+build1-0ubuntu0.12.04.1, > 15.0.1+build1-0ubuntu0.12.04.1), firefox:i386 (15.0+build1-0ubuntu0.12.04.1, > 15.0.1+build1-0ubuntu0.12.04.1), liblwres80:i386 (9.8.1.dfsg.P1-4ubuntu0.2, > 9.8.1.dfsg.P1-4ubuntu0.3), libevince3-3:i386 (3.4.0-0ubuntu1.3, > 3.4.0-0ubuntu1.4), libpython3.2:i386 (3.2.3-0ubuntu3, 3.2.3-0ubuntu3.1), > libbind9-80:i386 (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), > firefox-gnome-support:i386 (15.0+build1-0ubuntu0.12.04.1, > 15.0.1+build1-0ubuntu0.12.04.1), python-problem-report:i386 (2.0.1-0ubuntu12, > 2.0.1-0ubuntu13), evince:i386 (3.4.0-0ubuntu1.3, 3.4.0-0ubuntu1.4), > isc-dhcp-common:i386 (4.1.ESV-R4-0ubuntu5.2, 4.1.ESV-R4-0ubuntu5.5), > gimp:i386 (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), libgimp2.0:i386 > (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), libisccfg82:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), firefox-locale-en:i386 > (15.0+build1-0ubuntu0.12.04.1, 15.0.1+build1-0ubuntu0.12.04.1), gpgv:i386 > (1.4.11-3ubuntu2, 1.4.11-3ubuntu2.1), python3.2-minimal:i386 (3.2.3-0ubuntu3, > 3.2.3-0ubuntu3.1), resolvconf:i386 (1.63ubuntu15, 1.63ubuntu16), > python-apport:i386 (2.0.1-0ubuntu12, 2.0.1-0ubuntu13), libisc83:i386 > (9.8.1.dfsg.P1-4ubuntu0.2, 9.8.1.dfsg.P1-4ubuntu0.3), totem:i386 > (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), xserver-xorg-input-synaptics:i386 > (1.6.2-1ubuntu1~precise1, 1.6.2-1ubuntu1~precise2), gimp-data:i386 > (2.6.12-1ubuntu1, 2.6.12-1ubuntu1.1), apport-gtk:i386 (2.0.1-0ubuntu12, > 2.0.1-0ubuntu13), totem-mozilla:i386 (3.0.1-0ubuntu21, 3.0.1-0ubuntu21.1), > gnupg:i386 (1.4.11-3ubuntu2, 1.4.11-3ubuntu2.1) > End-Date: 2012-09-20 14:20:51 > > Start-Date: 2012-09-20 14:23:42 > Commandline: aptdaemon role='role-commit-packages' sender=':1.115' > Upgrade: libgnomevfs2-0:i386 (2.24.4-1ubuntu2, 2.24.4-1ubuntu2.1), > libdbus-1-3:i386 (1.4.18-1ubuntu1, 1.4.18-1ubuntu1.1), dbus:i386 > (1.4.18-1ubuntu1, 1.4.18-1ubuntu1.1), libgnomevfs2-extra:i386 > (2.24.4-1ubuntu2, 2.24.4-1ubuntu2.1), tzdata:i386 (2012e-0ubuntu0.12.04, > 2012e-0ubuntu0.12.04.1), dbus-x11:i386 (1.4.18-1ubuntu1, 1.4.18-1ubuntu1.1), > libgnomevfs2-common:i386 (2.24.4-1ubuntu2, 2.24.4-1ubuntu2.1) > End-Date: 2012-09-20 14:24:03 > > Start-Date: 2012-09-24 16:52:42 > Commandline: aptdaemon role='role-commit-packages' sender=':1.62' > Upgrade: libgs9-common:i386 (9.05~dfsg-0ubuntu4.1, 9.05~dfsg-0ubuntu4.2), > ghostscript-x:i386 (9.05~dfsg-0ubuntu4.1, 9.05~dfsg-0ubuntu4.2), > linux-libc-dev:i386 (3.2.0-30.48, 3.2.0-31.50), software-center:i386 (5.2.5, > 5.2.6), libgs9:i386 (9.05~dfsg-0ubuntu4.1, 9.05~dfsg-0ubuntu4.2), > ghostscript:i386 (9.05~dfsg-0ubuntu4.1, 9.05~dfsg-0ubuntu4.2), > ghostscript-cups:i386 (9.05~dfsg-0ubuntu4.1, 9.05~dfsg-0ubuntu4.2) > End-Date: 2012-09-24 16:54:30 > > Start-Date: 2012-09-25 09:19:10 > Commandline: aptdaemon role='role-commit-packages' sender=':1.45' > Upgrade: libapt-pkg4.12:i386 (0.8.16~exp12ubuntu10.2, > 0.8.16~exp12ubuntu10.3), apt-transport-https:i386 (0.8.16~exp12ubuntu10.2, > 0.8.16~exp12ubuntu10.3), xserver-common:i386 (1.11.4-0ubuntu10.7, > 1.11.4-0ubuntu10.8), xserver-xorg-core:i386 (1.11.4-0ubuntu10.7, > 1.11.4-0ubuntu10.8), apt-utils:i386 (0.8.16~exp12ubuntu10.2, > 0.8.16~exp12ubuntu10.3), apt:i386 (0.8.16~exp12ubuntu10.2, > 0.8.16~exp12ubuntu10.3), libapt-inst1.4:i386 (0.8.16~exp12ubuntu10.2, > 0.8.16~exp12ubuntu10.3) > End-Date: 2012-09-25 09:19:40 > > Start-Date: 2012-09-25 14:26:56 > Commandline: aptdaemon role='role-commit-p
Re: USB interface stopped working after update
peg:i386 (20.0.1132.47~r144678-0ubuntu0.12.04.1, automatic), chromium-browser:i386 (20.0.1132.47~r144678-0ubuntu0.12.04.1) End-Date: 2012-09-25 14:27:24 On Wed, Sep 26, 2012 at 4:30 AM, wrote: Today's Topics: 3. USB interface stopped working after update (Bruno Tucunduva Ruviaro) 5. Re: USB interface stopped working after update (Ralf Mardorf) -- Hi, I have Ubuntu studio 12.04 installed on one laptop, and regular Ubuntu on another (also 12.04). Until a few days ago, both systems used to work fine with a PreSonus AudioBox 1818VSL USB interface. All of a sudden, the two laptops are no longer working with this interface. My only guess is that this was caused by some kind of software update (I usually do all required & recommended updates suggested by Ubuntu). To be more precise, Jack still sees the USB interface as before; I am able to start jack with the PreSonus, I see all the ins and outs in the connection window. But no sound seems to arrive in the hardware. No sound comes out. I used to see the AudioBox meters lighting up last week; they no longer light up this week. I've tested the audio interface on a Mac computer and it is working. In fact, if I boot Ubuntu studio from a live CD (that is, without any recent updates), the interface works again. Has anything like this happened to other people this week? Any tips on how to solve the problem? Thank you very much, Bruno -- Message: 5 Date: Wed, 26 Sep 2012 09:15:36 +0200 From: Ralf Mardorf To: Ubuntu Studio Users Help and Discussion Subject: Re: USB interface stopped working after update Message-ID: <1348643736.1175.17.camel@localhost.localdomain> Content-Type: text/plain; charset="UTF-8" If you upgraded using Synaptic, there'll be a history about the upgraded packages. Please send a copy of this list. Regards, Ralf -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
Re: USB interface stopped working after update
If you upgraded using Synaptic, there'll be a history about the upgraded packages. Please send a copy of this list. Regards, Ralf -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
USB interface stopped working after update
Hi, I have Ubuntu studio 12.04 installed on one laptop, and regular Ubuntu on another (also 12.04). Until a few days ago, both systems used to work fine with a PreSonus AudioBox 1818VSL USB interface. All of a sudden, the two laptops are no longer working with this interface. My only guess is that this was caused by some kind of software update (I usually do all required & recommended updates suggested by Ubuntu). To be more precise, Jack still sees the USB interface as before; I am able to start jack with the PreSonus, I see all the ins and outs in the connection window. But no sound seems to arrive in the hardware. No sound comes out. I used to see the AudioBox meters lighting up last week; they no longer light up this week. I've tested the audio interface on a Mac computer and it is working. In fact, if I boot Ubuntu studio from a live CD (that is, without any recent updates), the interface works again. Has anything like this happened to other people this week? Any tips on how to solve the problem? Thank you very much, Bruno -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users