[Ubuntu-x-swat] [Bug 560180] Re: wacom buttons don't work/cause mouse to move to upper left corner and click.
there is no more wacdump standard in wacom-tools for debugging purpose in Lucid ? Wacom-tools package disappear from synaptic but is still referenced as dependency : sudo apt-get install wacom-tools Reading package lists... Done Building dependency tree Reading state information... Done Package wacom-tools is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: xserver-xorg-input-wacom E: Package wacom-tools has no installation candidate -- wacom buttons don't work/cause mouse to move to upper left corner and click. https://bugs.launchpad.net/bugs/560180 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to xf86-input-wacom in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 424620] Re: X.org doesn't hotplug wacom serial tablets
This patch works perfectly. I didn't tryed with my pen I lost (this is the second in few time), but at least wacom 4D mouse works perfectly. I hope it will be backported on karmic kernel or at least lucid one for next release. -- X.org doesn't hotplug wacom serial tablets https://bugs.launchpad.net/bugs/424620 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 424620] Re: X.org doesn't hotplug wacom serial tablets
I forgot to write that I tested with the linux-image-2.6.34-999-generic (if someone else is interested). Saddly it doesn't support my graphic card (GeForce 6100), I'm limited to 800x600 with this kernel). So I hope it will backported to mainstream one, to avoid a recompilation for every security update. -- X.org doesn't hotplug wacom serial tablets https://bugs.launchpad.net/bugs/424620 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 482447] Re: serial wacom not detected in Karmic
I hope I found a source of the problem, after doing more comparison between behavior with my USB tablet and my serial tablet. udev rules for wacom are only for usb devices. then no wacom or new 'event*) appear in /dev/input/ when I only plug the usb-serial adapter of my tablet. /dev/ttyUSB0 by, I suppose : /lib/udev/rules.d/60-persistent- serial.rules but /lib/udev/rules.d/40-xserver-xorg-input-wacom.rules does not match. -- serial wacom not detected in Karmic https://bugs.launchpad.net/bugs/482447 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 482447] Re: serial wacom not detected in Karmic
** Tags added: udev -- serial wacom not detected in Karmic https://bugs.launchpad.net/bugs/482447 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 482447] [NEW] serial wacom not detected in Karmic
Public bug reported: Binary package hint: wacom-tools Related to #424620 in Jaunty. On Karmic, modify xorg.conf doesn't works anymore to access to serial tablet. wacdump still detect the serial tablet attached at ttyUSB0: MODEL=Wacom Intuos 9x12 ROM=1.1-7 CLS=Serial VNDR=Wacom DEV=Intuos SUB=GD-0912-R But this table is even not seen as a classic cursor tablet. Could this be related to HAL ? There is a file : /usr/share/hal/fdi/policy/20thirdparty/10-linuxwacom.fdi Is a link to : /etc/hal/fdi/policy/ needed ? Is there some serial number to add in this file ? Every information is welcome. ** Affects: wacom-tools (Ubuntu) Importance: Undecided Status: New -- serial wacom not detected in Karmic https://bugs.launchpad.net/bugs/482447 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 424620] Re: X.org doesn't hotplug wacom serial tablets
This is the lspci. I booted with a standard ubuntu X.org config, to generate this two files and explain more deeply the source of the problem. The detail of the device (could be an hardware problem on the device or motherboard) : (I made a mistake in my previous comment, it was not detected in lsusb) before I unplug/replug it. Anyway an hotplug detection by X.org of serial tablet (via usb or direct serial) could be better for the overall hotplug system. I suppose some other serial devices has the same kind of hotplug problem. wacdump /dev/ttyUSB0 see immediatly the model of my wacom : MODEL=Wacom Intuos 9x12 ROM=1.1-7 CLS=Serial VNDR=Wacom DEV=Intuos SUB=GD-0912-R Then this can be autodetected. Bus 002 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x067b Prolific Technology, Inc. idProduct 0x2303 PL2303 Serial Port bcdDevice2.02 iManufacturer 0 iProduct0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x (Bus Powered) ** Attachment added: lspci.txt http://launchpadlibrarian.net/31460065/lspci.txt -- X.org doesn't hotplug wacom serial tablets https://bugs.launchpad.net/bugs/424620 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 424620] Re: X.org doesn't hotplug wacom serial tablets
Last informations addition : In first comment, I made a mistake: Zippy Technology Corp. is my USB keyboard, not the converter Prolific Technology, Inc. PL2303 is the converter, it use usbserial generic usbserial module). Mypaint (that is in official debian packages, since one week or two, not in ubuntu for now), enable and autodetect all wacom like input device by default, it could be good to have the same thing in Inkscape and Gimp, instead of having the new user and other that forgot since the last configuration that there is to enable them in preferences before it works. I would probably add a bug report in Inkscape part of the tracker ? -- X.org doesn't hotplug wacom serial tablets https://bugs.launchpad.net/bugs/424620 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
[Ubuntu-x-swat] [Bug 424620] Re: X.org doesn't hotplug wacom serial tablets
Here the xorg.conf that allow to use my serial-usb converter + serial tablet config. As the hw problem of my usb-serial converter, only occur at computer turn on time, and I only want to reboot, I disconnected the usb-serial converter, booted without it, wait for error msg replugged it to finish, as I've to do at each boot. The best solution should really to be able to boot without tablet and hotplug detection as for other, I don't want to use it all the day, and then don't want to put it on all the day. In all case, I must, with this xorg.conf, unplug/replug it at first boot time, and unplug it after X.org boot. let it connected for reboot or plug it before reboot is fine too. The X.org.0.log error log finish with this kind of error (about the same for each of the 3 configured device): (**) Option SendCoreEvents (**) stylus: always reports core events (**) stylus device is /dev/ttyUSB0 (**) stylus (stylus) is not a pad (**) stylus is in absolute mode (**) WACOM: suppress value is 2 (**) Option BaudRate 9600 (**) stylus: serial speed 9600 (II) XINPUT: Adding extended input device stylus (type: Wacom Stylus) (**) Option Device /dev/ttyUSB0 (EE) xf86OpenSerial: Cannot open device /dev/ttyUSB0 No such file or directory. Error opening /dev/ttyUSB0 : No such file or directory (II) UnloadModule: wacom (**) Option SendCoreEvents (**) eraser: always reports core events (**) eraser device is /dev/ttyUSB0 (**) eraser (eraser) is not a pad (**) eraser is in absolute mode (**) WACOM: suppress value is 2 (**) Option BaudRate 9600 (**) eraser: serial speed 9600 (II) XINPUT: Adding extended input device eraser (type: Wacom Eraser) (**) Option Device /dev/ttyUSB0 (EE) xf86OpenSerial: Cannot open device /dev/ttyUSB0 No such file or directory. Error opening /dev/ttyUSB0 : No such file or directory II) UnloadModule: wacom (**) Option SendCoreEvents (**) cursor: always reports core events (**) cursor device is /dev/ttyUSB0 (**) cursor (cursor) is not a pad (**) cursor is in relative mode (**) WACOM: suppress value is 2 (**) Option BaudRate 9600 (**) cursor: serial speed 9600 (II) XINPUT: Adding extended input device cursor (type: Wacom Cursor) (**) Option Device /dev/ttyUSB0 (EE) xf86OpenSerial: Cannot open device /dev/ttyUSB0 No such file or directory. Error opening /dev/ttyUSB0 : No such file or directory (II) UnloadModule: wacom Backtrace: 0: /usr/X11R6/bin/X(xorg_backtrace+0x26) [0x4f1b66] 1: /usr/X11R6/bin/X(xf86SigHandler+0x41) [0x485a61] 2: /lib/libc.so.6 [0x7f5425379040] 3: /lib/libc.so.6(strlen+0x10) [0x7f54253c6c40] 4: /lib/libc.so.6(_IO_vfprintf+0x3dbe) [0x7f542538f75e] 5: /lib/libc.so.6(__vsnprintf_chk+0xa8) [0x7f5425442738] 6: /usr/X11R6/bin/X(LogVWrite+0x131) [0x4fb4a1] 7: /usr/X11R6/bin/X(ErrorF+0x8d) [0x4fb68d] 8: /usr/lib/xorg/modules/input//wacom_drv.so [0x7f5421d8d0d2] 9: /usr/X11R6/bin/X(ActivateDevice+0x3e) [0x447a8e] 10: /usr/X11R6/bin/X(InitAndStartDevices+0x3a) [0x447baa] 11: /usr/X11R6/bin/X(main+0x37f) [0x433d4f] 12: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f54253645a6] 13: /usr/X11R6/bin/X [0x433219] Saw signal 11. Server aborting. In case of pluged and detected serial wacom : (**) Option SendCoreEvents (**) stylus: always reports core events (**) stylus device is /dev/ttyUSB0 (**) stylus (stylus) is not a pad (**) stylus is in absolute mode (**) WACOM: suppress value is 2 (**) Option BaudRate 9600 (**) stylus: serial speed 9600 (II) XINPUT: Adding extended input device stylus (type: Wacom Stylus) (**) Option Device /dev/ttyUSB0 (**) Option StopBits 1 (**) Option DataBits 8 (**) Option Parity None (**) Option Vmin 1 (**) Option Vtime 10 (**) Option FlowControl Xoff usbDetect: can not ioctl version (==) Wacom tablet model : GD-0912-R00,V1.1-7 (==) Wacom using pressure threshold of 61 for button 1 (==) Wacom Serial Intuos tablet speed=9600 (38400) maxX=30480 maxY=24060 maxZ=1023 resX=2540 resY=2540 tilt=enabled (==) Wacom device stylus top X=0 top Y=0 bottom X=30480 bottom Y=24060 resol X=2540 resol Y=2540 (**) Option SendCoreEvents (**) eraser: always reports core events (**) eraser device is /dev/ttyUSB0 (**) eraser (eraser) is not a pad (**) eraser is in absolute mode (**) WACOM: suppress value is 2 (**) eraser: threshold = 61 (**) eraser: max x = 30480 (**) eraser: max y = 24060 (**) eraser: max z = 1023 (**) Option BaudRate 9600 (**) eraser: serial speed 9600 (II) XINPUT: Adding extended input device eraser (type: Wacom Eraser) (==) Wacom device eraser top X=0 top Y=0 bottom X=30480 bottom Y=24060 resol X=2540 resol Y=2540 (**) Option SendCoreEvents (**) cursor: always reports core events (**) cursor device is /dev/ttyUSB0 (**) cursor (cursor) is not a pad (**) cursor is in relative mode (**) WACOM: suppress value is 2 (**) cursor: threshold = 61 (**) cursor: max x = 30480 (**) cursor: max y = 24060 (**) cursor: max z = 1023 (**) Option BaudRate 9600 (**) cursor: serial speed 9600 (II) XINPUT: Adding extended input device cursor (type: Wacom Cursor)
[Ubuntu-x-swat] [Bug 424620] [NEW] X.org doesn't hotplug wacom serial tablets
Public bug reported: Binary package hint: xserver-xorg-input-wacom On Jaunty, Description:Ubuntu 9.04 Release:9.04 I've a little USB volito Wacom and a big serial Intuos (GD-0912-R) graphics tablets, connected via serial-USB adapter (my computer doesn't have serial port). The second one is sold really cheap by windows users because there are no more supported on their systems. USB volito hotplug works perfectly, nothing to configure in X.org. USB-serial cable + serial wacom hotplug doesn't work. I need to configure the device in /etc/X11/xorg.conf The problem is if the wacom is plugged before the system boot, it's not detected, and as hotplug doesn't work, I can't plug it after X.org has booted. If the device isn't present at X.org starting, I've a text screen giving me several solution to fallback from X.org failure. Then I've to plug the device just after Linux kernel boot, but before X.org start. If X.org could hotplug detect it, it could be better. My USB=serial cable device is : Bus 002 Device 002: ID 099a:7160 Zippy Technology Corp. It is well detected if usbserial mod is loadad : [57054.204054] usb 2-4: new full speed USB device using ohci_hcd and address 5 [57054.407463] usb 2-4: configuration #1 chosen from 1 choice [57054.521015] USB Serial support registered for pl2303 [57054.521061] pl2303 2-4:1.0: pl2303 converter detected [57054.562419] usb 2-4: pl2303 converter now attached to ttyUSB0 [57054.562459] usbcore: registered new interface driver pl2303 [57054.562466] pl2303: Prolific PL2303 USB to serial adaptor driver The tablet is even not seen as a standard mouse (as USB wacom are, if the driver is not well configured). ** Affects: wacom-tools (Ubuntu) Importance: Undecided Status: New ** Tags: hotplug input usb wacom x.org -- X.org doesn't hotplug wacom serial tablets https://bugs.launchpad.net/bugs/424620 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to wacom-tools in ubuntu. ___ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
