Re: [SlimDevices: Unix] BETA: piCorePlayer 4.0.0
paul- wrote: > Audio output only. Thanks for clarifying Paul! ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=109286 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer 4.0.0
paul- wrote: > We have been hard at work the last few months. There has been some > significant changes to the wifi system, so we want to release a public > beta, as our hardware configurations that we have to test on are > limited. > > _*pCP_4.0.0_BETA4*_ > > > > - Launching new web site www.picoreplayer.org. - Kernel 4.14.56 - AudioCore kernel 4.14.56-rt34. All RPi processors supporting > Realtime Kernels. - RPi Firmware 2018/07/17 - Completely rebuilt wifi. Web interface with hidden wifi, special > characters - Added driver for rtl8188eu chipset - Static IP support for Ethernet or wifi. - For those that have seen occasions kernel panics at boot, this > should be fixed. > > > > > REPO UPDATES> > > - Update to Squeezelite v1.9.0- - Updated Bluez to 5.50 - Updated LMS binaries (flac and sox are now significantly faster, > upgrade perl cyrpto libraries) > > > > > DAC ADDITIONS> > > - Allo Katana - Google voiceHat - pCP default kernel now supports 384k on a good number of DAC's > > > > > > PS, I'm not going to give you the direct download links, because I > want you to go see our new website. Insitu Update is also supported. Hi Paul & piCorePlayer Team, Thanks for this big update and continuous support! I am just intrigued by the implementation of the support for the Google AIY voice kit. When you get a chance would you please be so kind as to explain how it works with piCorePlayer? Thanks a lot! albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=109286 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeeze on Arch on Wandboard: boot problems following update: Solved
All sorted I have managed to shrink my image. The method I have mentioned above works very well. Problem was with another defective (more likely not genuine) sd card that got corrupted! Anyways happy days here, SoA is rocking out again:cool: albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105587 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeeze on Arch on Wandboard: boot problems following update: Solved
Hi guys, That's me again. I would really appreciate if someone could help me out. My 16GB SD Card with SoA on it got corrupted. Unfortunately all the 16 GB SD Cards I have got are slightly smaller than my back-ups and as such I cannot dd any of them! I know for sure that the back-ups are working as I have copied one of the images on a 32GB SD Card and it worked. In the past I did the terrible mistake of copying the 8GB image on a 16GB SD Card. Damn it! Do you guys know how to truncate/shrink the image? I have followed the procedures I have found in the link below, however when I check the size of the truncated image with the command: Code: sudo fdisk -l the size looks the same. https://evilshit.wordpress.com/2014/02/07/how-to-trim-disk-images-to-partition-size/ Many thanks! albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105587 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeeze on Arch on Wandboard: boot problems following update: Solved
Hi guys, I just wanted to share something with you. After a very long time today I have attempted to update the arch packages on my Wandboard quad. I wasn't able to perform the update due to a compatibility issue with the file /etc/ssl/certs/ca-certificates.crt. I have found the solution here: https://www.archlinux.org/news/ca-certificates-utils-20170307-1-upgrade-requires-manual-intervention/ where it is recommended to run the following: Code: pacman -Syuw rm /etc/ssl/certs/ca-certificates.crt pacman -Su That did the trick. Indeed I was then able to perform the updates as expected. On more warning. Be aware that the file: Code: /etc/ssh/sshd_config has been superseded by: Code: /etc/ssh/sshd_config.pacnew This means that before rebooting don't forget to add the usual line: Code: PermitRootLogin yes in the file above otherwise you will not be able to SSH to it. That's me done:cool: -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105587 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Portable PiCorePlayer option?
Grumpy Bob wrote: > Looks quite neat. My portable option is to use a 'portable drive as an > LMS server' > (http://forums.slimdevices.com/showthread.php?105512-Portable-squeezebox-with-a-Western-Digital-quot-Passport-Wireless-quot) > and any of a number of options as a player - could be the device you > link to, or a phone, tablet, or other device running squeezelite. > > Robert Yep it looks neat indeed. There are a few options. The cheapest one is the self assembly kit with no cam for £70. Thanks for the link. I will look at it as well. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107454 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Portable PiCorePlayer option?
I just came across with the following: http://www.grantsinclair.com/en/all-products/poco-zero-plus-kit-62.html Could this be a nice option for a portable PiCorePlayer? Any thoughts? albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107454 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP3.11 + Raspberry Pi Zero-W, onboard Wifi not working
Sylvania wrote: > Hi > > Explanation :-) "removed the blacklist=brcmfmac from cmdline.txt" > > I read somewhere that the driver needed to be blacklisted in the > cmdline.txt.. that's it :-) > > just copy bcm2708-rpi-0-w.dtb, bootcode.bin and all dat/elf files Thanks! -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107102 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP3.11 + Raspberry Pi Zero-W, onboard Wifi not working
cpd73 wrote: > Hmm... Not working for me. Just to confirm I have done the following: > > > > - Flashed PCP 3.11 to SDCard - Mounted the 'PCP' volume in Ubuntu - Deleted all dtb files from 'PCP' - Copied bcm2708-rpi-0-w.dtb, bootcode.bin, fixup.dat, fixup_cd.dat, > fixup_x.dat, start.elf, start_cd.elf start_x.elf from > 2017-03-02-raspbian-jessie-lite.img - Downloaded newconfig.cfg from PCP google.site - Edited newconfig.cfg to turn wifi on, set SSID and password, > encryption to WPA - Put newconfig.cfg onto 'PCP' volume - Put SD Card in Pi - Boot Pi - green light illuminates, and stays on - Checked on my router, and no new IPs registered :-( - newconfig.cfg still remains on SDCard - should PCP not remove this > on startup? > > > > > Should the above work? Have I missed a step? Hi cpd73, This is exactly what I did. The only thing I have noticed though is that it takes a little bit for the RPiZero W to get an IP address assigned. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107102 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 3.11 and IQAudio econder
Greg Erskine wrote: > hi albertone74, > > Congratulations on getting it working. > > On the [Tweaks] page there are User commands for running programs on > boot. If you get a chance you might want to try it. > > You probably could have just added "/home/tc/tools/IQ_rot" to User > command #1. > > You don't need the "&" as User commands are backgrounded and they are > run as root. > > regards > Greg Hi Greg, That's great, that worked like a charm indeed! Many thank for the tip!:cool: ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107099 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
paul- wrote: > I have uploaded Crypt::Openssl::Rsa perl module to the pcp repo. The > extension is perl_crypt_openssl_rsa.tcz If you install this module > (Install from the Extensions web page in pcp), you can then install > phillipe_44's Shairtunes2W (Stream Airtunes to the LMS) to your pcp > based LMS server. > > Here is the 3rd part software thread > http://forums.slimdevices.com/showthread.php?106289-announce-ShairTunes2W-Airtunes-on-LMS-(forked-version-with-Windows-support) > > To install Shairtunes2W, add this repo to your lms plugin directory. > https://sourceforge.net/projects/lms-plugins-philippe44/ > > Let me know how it goes. (I have also installed Shairtunes2W on my > ubuntu x64 server) Paul, Shairtunes2W is working like a charm on my PiZero W with piCorePlayer 3.11. Just wanted to report it. Thanks! -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
d6jg wrote: > Thanks Albertone. You saved me the hassle of updating the SD card to > find it wouldn't work anyway :) Hi d6jg, Actually it does work. See here http://forums.slimdevices.com/showthread.php?107102-PCP3-11-Raspberry-Pi-Zero-W-onboard-Wifi-not-working&p=878410&posted=1#post878410 Happy days:cool: -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP3.11 + Raspberry Pi Zero-W, onboard Wifi not working
paul- wrote: > If you used a fresh pCP image, that blacklist line is not there. It was > only added if you used an image and disabled the rpi3 wifi. > > You may need to pull the files from a raspbian image that has a 4.4.y > kernel. The github is already for 4.9.y Bingo!! That did the trick indeed. When Kim said it worked for him I read again his post and he did say he copied the files from the 2017-03-02-raspbian-jessie-lite. Thanks Paul for pointing that out and thanks to Kim to share his findings. All good now:cool: -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107102 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP3.11 + Raspberry Pi Zero-W, onboard Wifi not working
Sylvania wrote: > Thank you :-) That did it ! > > removed these files from sdcard (space needed): > bcm2708-rpi-b-plus.dtb > bcm2708-rpi-b.dtb > bcm2708-rpi-cm.dtb > bcm2709-rpi-2-b.dtb > bcm2710-rpi-3-b.dtb > bcm2710-rpi-cm3.dtb > > copy files from 2017-03-02-raspbian-jessie-lite to sdcard: > bcm2708-rpi-0-w.dtb > bootcode.bin > fixup.dat > fixup_cd.dat > fixup_x.dat > start.elf > start_cd.elf > start_x.elf > > removed the blacklist=brcmfmac from cmdline.txt and reboot.. > > Best regards > Kim That's great! Can you please explain what you meant by > removed the blacklist=brcmfmac from cmdline.txt Reason being I have tried those steps but it didn't work for me. Thanks. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107102 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 3.11 and IQAudio econder
All sorted now!
After a fresh install of 3.11 all is working fine. I can confirm that
adding the command at the end of the file worked as in the past:
Code:
#!/bin/sh
# put other system startup commands here
GREEN="$(echo -e '\033[1;32m')"
echo
echo "${GREEN}Running bootlocal.sh..."
#pCPstart--
/home/tc/www/cgi-bin/do_rebootstuff.sh 2>&1 | tee -a /var/log/pcp_boot.log
#pCPstop--
sudo /home/tc/tools/IQ_rot&
Go and figure!:p
----
albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863
View this thread: http://forums.slimdevices.com/showthread.php?t=107099
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP3.11 + Raspberry Pi Zero-W, onboard Wifi not working
Sylvania wrote: > Hi > > > I have just tried the new Raspberry Pi Zero-W's onboard Wifi on PCP > 3.11. I get a boot message saying: > > Checking wifi... wifi is on. > ifconfig: SIOCGIFFLAGS: No such device > ifconfig: SIOCGIFFLAGS: No such device > No wifi devices found! > ifconfig: wlan0: error fetching interface information: Device not found > > i have tried to blacklist brcmfmac, but no luck.. > Will the Zero's Wifi be supported in future releases? > > best regards > Kim Olesen yep, be positive and read here http://forums.slimdevices.com/showthread.php?106755-Announce-piCorePlayer-3-10/page62 ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107102 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 3.11 and IQAudio econder
albertone74 wrote:
> Hi Paul,
>
> Thanks for coming back to my query.
>
> Yes I always backed up all the changes after eating the file.
>
> Please see below the content of the file /opt/bootlocal.sh
>
> >
Code:
> >
> #!/bin/sh
> # put other system startup commands here
> GREEN="$(echo -e '\033[1;32m')"
> echo
> echo "${GREEN}Running bootlocal.sh..."
> #pCPstart--
> sudo /home/tc/www/cgi-bin/do_rebootstuff.sh 2>&1 | tee -a
/var/log/pcp_boot.log
> #pCPstop--
> sudo /home/tc/tools/IQ_rot&
> >
>
> I have also tried with inserting the command before the line
> #pCPstop--
>
> >
Code:
> >
> #!/bin/sh
> # put other system startup commands here
> GREEN="$(echo -e '\033[1;32m')"
> echo
> echo "${GREEN}Running bootlocal.sh..."
> #pCPstart--
> sudo /home/tc/www/cgi-bin/do_rebootstuff.sh 2>&1 | tee -a
/var/log/pcp_boot.log
> sudo /home/tc/tools/IQ_rot&
> #pCPstop--
>
> >
>
> but to no avail.
>
> Any other thoughts please?
Paul,
I have tried again with a fresh install of the piCorePlayer and now I
can't install git from the piCorePlayer main page, see below:
Code:
Downloading: ipv6-4.4.39-pcpCore+.tcz
Error on ipv6-4.4.39-pcpCore+.tcz
It's odd as ipv6-4.4.39-pcpCore+ seems to be installed correctly indeed
if i try load it I get:
Code:
ipv6-4.4.39-piCore+ is already installed!
However if i try manually I get:
Code:
tce-load -wi ipv6-4.4.39-pcpCore+.tcz
Downloading: ipv6-4.4.39-pcpCore+.tcz
Connecting to repo.tinycorelinux.net (89.22.99.37:80)
wget: server returned error: HTTP/1.1 404 Not Found
md5sum: ipv6-4.4.39-pcpCore+.tcz.md5.txt: No such file or directory
Error on ipv6-4.4.39-pcpCore+.tcz
And installing manually git I get:
Code:
tce-load -wi git.tcz
git.tcz.dep OK
curl.tcz.dep OK
gnutls.tcz.dep OK
nettle.tcz.dep OK
p11-kit.tcz.dep OK
libssh2.tcz.dep OK
libgcrypt.tcz.dep OK
Downloading: ipv6-4.4.39-pcpCore+.tcz
Connecting to repo.tinycorelinux.net (89.22.99.37:80)
wget: server returned error: HTTP/1.1 404 Not Found
md5sum: ipv6-4.4.39-pcpCore+.tcz.md5.txt: No such file or directory
Error on ipv6-4.4.39-pcpCore+.tcz
Not my lucky day:p
albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863
View this thread: http://forums.slimdevices.com/showthread.php?t=107099
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 3.11 and IQAudio econder
paul- wrote:
> You need to backup your changes.
>
> Type
>
> pcp bu
>
> After you make any edits to files
Hi Paul,
Thanks for coming back to my query.
Yes I always backed up all the changes after eating the file.
Please see below the content of the file /opt/bootlocal.sh
Code:
#!/bin/sh
# put other system startup commands here
GREEN="$(echo -e '\033[1;32m')"
echo
echo "${GREEN}Running bootlocal.sh..."
#pCPstart--
sudo /home/tc/www/cgi-bin/do_rebootstuff.sh 2>&1 | tee -a
/var/log/pcp_boot.log
#pCPstop--
sudo /home/tc/tools/IQ_rot&
I have also tried with inserting the command before the line
#pCPstop--
Code:
#!/bin/sh
# put other system startup commands here
GREEN="$(echo -e '\033[1;32m')"
echo
echo "${GREEN}Running bootlocal.sh..."
#pCPstart--
sudo /home/tc/www/cgi-bin/do_rebootstuff.sh 2>&1 | tee -a
/var/log/pcp_boot.log
sudo /home/tc/tools/IQ_rot&
#pCPstop--
but to no avail.
Any other thoughts please?
albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863
View this thread: http://forums.slimdevices.com/showthread.php?t=107099
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] piCorePlayer 3.11 and IQAudio econder
I hope someone can shade some light as I can't get my head around this issue. I have been following the same steps for the last few months but know for some strange reasons I am struggling with it.:confused: I have installed the iqaudio tools to use a rotary encoder to control the volume. https://github.com/iqaudio/tools To run it at start up: Code: sudo nano /opt/bootlocal.sh sudo /home/tc/tools/IQ_rot& Then backup and reboot. However after rebooting the tool doesn't start. It works fine by running Code: sudo /home/tc/tools/IQ_rot& Thanks a lot! -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=107099 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
paul- wrote: > I'll play with it when I get my Zero-W. But from those reports, we will > need to update the kernel. That's great, thanks a lot! ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
paul- wrote: > Since the firmware was released to the public 4 days ago for the > zero...We don't get advanced information from rpi. > > In theory, you should be able to grab firmware from > https://github.com/raspberrypi/firmware/tree/master/boot > > These are the files you want. Put them on the first fat > partition.replacing what is there. Do not replace the kernel, inird > or the overlays > > bcm2708-rpi-0-w.dtb > bcm2708-rpi-b-plus.dtb > bcm2708-rpi-b.dtb > bcm2708-rpi-cm.dtb > bcm2709-rpi-2-b.dtb > bcm2710-rpi-3-b.dtb > bcm2710-rpi-cm3.dtb > bootcode.bin > fixup.dat > fixup_cd.dat > fixup_x.dat > start.elf > start_cd.elf > start_x.elf > > I have a Zero-W enroute, so we can get other needed support info., Hi Paul, Thanks for sharing it. Today I have got my RPi Zero W and as already advised to d6jg I have replaced only the files listed in your post. After inserting the card the piCorePalyer doesn't boot up at all. Please find attached a screenshot of what I have got with the RPi zero hooked to my TV via HDMI. It goes without saying that I am more than happy to do any sort of testing you may want me to do for you;) Thanks a lot! +---+ |Filename: screenshot.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=22272| +-------+ albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
albertone74 wrote: > Hi Paul, > Thanks for coming back to me. I am definitely doing something wrong > then. Can you please confirm that the file newconfig.cfg to set up the > wifi is still the same? > > Thanks a lot! Paul, Please ignore my previous message. It's all working fine, it was a temporary problem with my router:o Thanks again. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
paul- wrote: > I use it all the time during development. Your USB disk has to be fat32 > or ext2-4 formatted, and has to be the only device inserted. It also > will only setup the config. It won't install jivelite or extra > programs. Hi Paul, Thanks for coming back to me. I am definitely doing something wrong then. Can you please confirm that the file newconfig.cfg to set up the wifi is still the same? Thanks a lot! ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
Guys, Has anybody tried the "newconfig method" for the piCorePlayer 3.11 version? I am just asking that as I am aware it is not working for 3.10. However I have been wondering if this is still the case for the 3.11 as I have been failing so far;) Thanks! ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
ralphy wrote: > I've uploaded the tcz to the pcp beta files area. > > > Code: > > pcp bu # save pcp config > > cd /mnt/mmcblk0p2/tce/optional > > wget -O jivelite.tcz.md5.txt http://downloads.sourceforge.net/project/picoreplayer/beta/jivelite_touch.tcz.md5.txt > > wget -O jivelite.tcz http://downloads.sourceforge.net/project/picoreplayer/beta/jivelite_touch.tcz > > md5sum jivelite.tcz # make sure the file downloaded correctly > bbf0ef745911b982150de9bb63e5d391 jivelite.tcz > > cat jivelite.tcz.md5.txt # does it match the line above? > bbf0ef745911b982150de9bb63e5d391 jivelite.tcz > > pcp rb # you must reboot! > > > NB: You must already have jivelite enabled for this to work. Hey ralphy, I have just installed it on my RPi2 and it is rocking out:cool: That's brilliant! Cheers. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
ralphy wrote: > Then it's not worth it. > > I've merged your pull requests. Thank you. > > Here's a couple pics of the piGridSkin running on pcp 3.10 with the > official 7" screen. Much easier to navigate with the touch > screen...works well with a remote too. I'll make the tcz available for > anyone comfortable with the command line to install manually to play > with and test. > > 21878 > 21879 > 21880 Hi ralphy, I do love it!!! That looks so good to me! When you get a chance, would you please share instrunctions to install it manually. I will be pleased to test it ;) Cheers ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
paul- wrote: > I'll PM some info to you. Hi paul-, That's great. Many thanks for that. Looking forward to it;) ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi guys, I would love to use the piCorePlayer as a portable DAP and use my smartphone to get access to it when travelling. Could someone please point me in the right direction how to install both hostapd and a DHCP server? Thanks a lot!:cool: albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
albertone74 wrote: > Hi Ralphy, > > Just a question, please. As far as you know, is there a way to set a > default skin (i.e. the VU Meter Kolossos Oval) when jivelite starts? I > mean, would it be possible to visualize the VU Meter as soon as I tap > the play button, instead of cycling though all the options by tapping > the Pi touch screen? > > Many thanks. Ralphy, Please ignore my request. All sorted. I went to Settings-->Screen-->Now Playing and from there I selected only the VU meter. Job done!:cool: ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
huxmut wrote: > You can have just a single screen. Make it the VU meters... > Certainly not an elegant solution... Hi huxmut, Thanks for your suggestion. Hopefully there is another way to do it;) ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Hi Ralphy, Just a question, please. As far as you know, is there a way to set a default skin (i.e. the VU Meter Kolossos Oval) when jivelite starts? I mean, would it be possible to visualize the VU Meter as soon as I tap the play button, instead of cycling though all the options by tapping the Pi touch screen? Many thanks. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
ralphy wrote: > When you get a chance, could you please try the latest version and let > me know if it crashes as well? > > > Code: > > wget -O shairport-sync http://ralph_irving.users.sourceforge.net/pico/shairport-sync-2.8.4 > > > > Thank you. Hi Ralphy, Again good news, I can confirm that the latest version 2.8.4 is working fine. No crashes at all.;) Please let me know if you would like me to do any more testing for you! ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
ralphy wrote: > I've updated the logitech Clock screen saver applet with support for the > JogglerSkin, which is used by the picoreplayer jivelite package. > > It's currently available from the picoreplayer applet repository. > > If you haven't already enabled it, you need to add this url to > Settings->Plugin->Additional Repositories (at the bottom) in the LMS > gui. > > Code: > > http://picoreplayer.sourceforge.net/repo.xml > > > > Then navigate to Settings->Advanced->Applet Installer->Clock > ScreenSaver->install on picoreplayer, then choose Quit from the top > level menu. > > After jivelite restarts, you'll have new clock options in > Settings->Screen->Screensavers->When playing, stopped and off. > > I plan to eventually add the updated clock applet to our jivelite.tcz. > However, I'd like to have more people use it for a while before doing > this. It's much easier to update the applet through the installer > rather than downloading the entire jivelite subsystem for a fix. > > *Don't forget to backup your picoreplayer configuration before you > reboot the player, or you'll have to reinstall and reconfigure > again*. > > I have not made any attempt to use the extra screen area available > with the JogglerSkin, I just fixed the offsets for the larger screen. Hi Ralphy, Spot on! It is working like a charm. Many thanks for this.:cool: albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeeze on Arch on Wandboard: boot problems following update: Solved
kesey wrote: > Albert, have a look at your PM. Hi Kesey, I have seen it, many thanks. All sorted! ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105587 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeeze on Arch on Wandboard: boot problems following update: Solved
kesey wrote: > Hi Albert, > > Have you an older SoA image (an .img file which you backed up sometime > this year or so)? If you have, restore this to your micro SD card and > ensure that you can boot from that older .img file. Once you have done > that, prior to making any updates reboot your Wandboard and ensure that > it boots up, gets an IP address etc. > > Just in case the version of Perl is causing a dependency problem, do the > following once you have restored your older SoA .img and prior to doing > anything else. > > SSH in and edit > /etc/pacman.conf > > Uncomment 'IgnorePkg' then edit that line as follows; > > IgnorePkg = perl > > and save the edited pacman.conf file. Reboot, and SSH in again. > > At this stage, you can begin the update process via SSH, viz: > > pacman -Syy > pacman -Su > pacman -Sy uboot-wandboard > > Best of luck, > > kesey Hi kesey, Many thanks for your further instructions. Yes, I have got triple backup on three different hard drives just in case;) Editing the pacman.conf file did the trick. Something odd is happening though. I can get access the SoA web page but when I SSH to my WQUAD I get this error message: Code: root@192.168.1.2's password: Permission denied, please try again. root@192.168.1.40's password: Any thoughts? Thanks a lot! albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105587 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
amitk777 wrote: > HI, > > To me Shairport-sync comes up in green on the webpage. > I see that service is running when I login via SSH. > Yet picoreplayer does not appear on my Ipad. This mostly happens when I > switch to squeezelite and then later do airplay. > I installed 2.8.0 version and have to try the 2.6.0 version. > > -Amit Hi amitk777, I have had the same issue but I can confirm it can be fixed by following the instructions kindly given by Ralphy in response to my post:cool: -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
ralphy wrote: > It sounds like shairport-sync is crashing but unfortunately I've been > unable to reproduce this on 2.05. > > I updated the shairport-sync binary to 2.8.3 since pcp 2.03 was > released. > > I'd suggest starting by reverting to each older version to see if one of > them works. > > Ensure shairport-sync is already enabled in the web gui, then ssh/putty > as the tc user to the player. > > > Code: > > # Stop shairport sync > sudo /usr/local/etc/init.d/shairport-sync stop > > # Update the binary > cd /mnt/mmcblk0p2/tce > wget -O shairport-sync http://ralph_irving.users.sourceforge.net/pico/old/shairport-sync-2.8.1 > chmod 775 shairport-sync > > # Confirm the version just downloaded > ./shairport-sync --version > > # Start shairport sync and try an airplay connection > sudo /usr/local/etc/init.d/shairport-sync start > > > > If it still fails repeat for each older version by replacing the wget > command above with > > Code: > > wget -O shairport-sync http://ralph_irving.users.sourceforge.net/pico/old/shairport-sync-2.8.0 > wget -O shairport-sync http://ralph_irving.users.sourceforge.net/pico/old/shairport-sync-2.6 > > Hi Ralphy, Many thanks for coming back to me. Great news, shairport-sync-2.8.1 worked like a charm! Thanks again for your help! albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi Greg/Ralphy/Paul/Steen, Yesterday I have upgraded to version 2.05 and everything worked like a charm. All the services like JiveLite, LMS, Squeezelite, etc are running fine. Many thanks for another super update! Actually the only service I have been struggling with is Shairport-sync. Basically I can see the piCore player on my iPhone screen, however when I select it the service doesn't even start. Indeed when I go back to the piCorePlayer page it says that the service is not running. I have replicated this issue several times. Of course I have tried to re-install the piCorePlayer itself and both Squeezelite and Shairport but to no avail. It is very odd as after installing Shairport when I check the piCorePlayer page it says it is running but as soon as I select the player from my iPhone and I check back the piCoPlayer page it says it is not running anymore.:confused: It looks like it gets broken as soon the service starts. Just out of interest I have re-installed a previous backup with piCorePlayer 2.03 and Shairport run fine. When you get a chance could you please let me know what I can check? Once again thanks for this great piece of software:cool: albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeeze on Arch on Wandboard: boot problems following update: Solved
kesey wrote:
> My Wandboard Quad is still going strong and running SoA. Thanks again to
> Triode for his fine work on SoA, not to mention all the other stuff he
> graciously contributed to the Squeezebox ecosystem over the years.
>
> In the last couple of weeks, following an update using, firstly, the
> Squeeze on Arch Configuration Interface and later using SSH via Putty
> ("manually" on a restored previous SoA image), I found the Wandboard
> Quad would no longer boot. Restoring my previous SoA image using the USB
> Image Tool (http://www.alexpage.de/usb-image-tool/download/), got the
> Wandboard running again.
>
> Eventually, following various excursions to try and get the updated
> ArchLinux to boot, I came across the method to update the update the
> U-Boot package on archlinuxarm.org: Just go to
> https://archlinuxarm.org/platforms/armv7/freescale/wandboard and select
> the Installation tab. Go to the bottom of the page.
>
> *_NOTE:_* updating the U-Boot package must be done following an
> ArchLinux update but prior to an attempted re-boot following that
> ArchLinux update
>
> To get the Wandboard Quad running and current with ArchLinux updates and
> the latest nightly LMS 7.9 I did the following:
>
> 1: SSH into the Wandboard using Putty
> 2: Update ArchLinux by entering
>
> pacman -Syyand then
> pacman -Su
>
> 3: Install the updated U-Boot package
> In order to receive updates to the U-Boot bootloader, after an SSH into
> the system type:
> pacman -Sy uboot-wandboard
> When prompted, press y and hit enter to flash the bootloader to the
> micro-SD card.
>
> Reboot. Then you can update LMS as usual, using Triode's Squeeze on Arch
> Configuration Interface.
Hi kesey,
Many thanks for sharing your findings.
I have tried the suggested method but to no avail. I have literally
entered the following commands:
pacman -Syy
pacman -Su
pacman -Sy uboot-wandboard
but after rebooting I was not able to SSH to my WQuad anymore.
When you get a chance could you please let me have your thoughts?
Thanks a lot!
albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863
View this thread: http://forums.slimdevices.com/showthread.php?t=105587
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi guys, I thought it was a nice idea to share my working in progress piCorePlayer setup. I just need to fit a solid aluminium volume knob to the rotary encoder. The idea is to attach the volume control to the transparent top...more pictures to come:cool: Happy listening! +---+ |Filename: IMG_4884.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=20162| +---+ Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
albertone74 wrote: > Clive, Paul, Steen, > > Many thanks for your kind help.;) > > Yep, editing the file /mnt/mmcblk0p1/config.txt did the trick indeed. > Now the IQAudio card is set as 0 as I wanted and the rotary encoder is > working fine. In fact I can see the vertical bar moving up and down in > alsamixer as I turn the rotary encoder itself. > > The funny think though is that Squeezelite is no longer running since I > removed the line dtparam=audio=on. I have tried to re-install it several > times but to no avail. > > Do you guys know what it could be?:confused: > > Cheers. HI Guys, Good news! All sorted! I have just upgraded to piCorePlayer 2.03 and Squeezelite is working fine as expected, rotary encoder included. LMS is working like a charm, so pleased about it. Everything, and I mean everything, is working GREAT!;) Thanks for this fantastic software and for your hard work!:cool: Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
JackOfAll wrote: > Oh right Sorry, Alberto I'm going to go back to trying to prove > via a simple indisputable test case, that it possible to lock up the > Pi3B CPU. Clive, Paul, Steen, Many thanks for your kind help.;) Yep, editing the file /mnt/mmcblk0p1/config.txt did the trick indeed. Now the IQAudio card is set as 0 as I wanted and the rotary encoder is working fine. In fact I can see the vertical bar moving up and down in alsamixer as I turn the rotary encoder itself. The funny think though is that Squeezelite is no longer running since I removed the line dtparam=audio=on. I have tried to re-install it several times but to no avail. Do you know guys what it could be?:confused: Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
sbp wrote: > A simple way to change card number would be to remove the analog audio > card. > Edit config.txt file and remove dtparam=audio=on. > > steen Hi Steen, Thanks for your advice as well. I remember that this morning I was looking for that file but I could not locate it. Can you please let me know where it is in the system?:o Seriously I can't wait to get home to try what you and Clive suggested!:cool: Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
JackOfAll wrote: > Alberto, > > If they tell you it cannot be done from gui Create > /etc/modprobe.d/snd.conf yourself with "options snd > slots=snd_soc_iqaudio_dac" > > EDIT: If that doesn't work after reboot Is probably because they > have an older kernel where MODULE owner is not being set on machine > driver. > > "cat /proc/asound/modules" needs to return "snd_soc_iqaudio_dac". If > it doesn't work and there is "null" there instead, that is why. > 'ASoC: bcm: add missing .owner fields in sound card drivers' > (https://github.com/raspberrypi/linux/commit/29c79ce79c70db703a4621ecc7d24208ca991981) Hi Clive, Thanks for that. I will try it as soon as I get home as well. I have been struggling to get the rotary encoder up and running, that's why I am try trying to change the sound cards order. I would better off opening a new thread though.:o Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
sbp wrote: > PLEASE TRY THE NEW VERSION PICOREPLAYER 2.03. > *Great news. *Paul from the Tinycore and Logitech forum have joined the > team. Thanks to him LMS (Logitech Media Server) can now be installed and > run on your piCorePlayer. > > This means that pCP now can be used as: > > > > > - Standalone pCP player (as usual) - Standalone LMS server - it is very easy to setup a LMS server on > your Raspberry pi. Simply press a button and you are done. - Combined LMS server and pCP player > > > > > Changes: > > > > > - Added Squeezelite options to change GPIO status dependent on > squeezelite status. Handy for controlling an external amplifier. "-G > option". - Added Squeezeite options to run a script dependent upon > Squeezelite status. "-S option". - Fixed U V and v options in Squeezelite. - Added support for installing LMS on piCorePlayer. > > > > > https://sites.google.com/site/picoreplayer/home/news > > > > Regards > The Team Hi Steen, That's a fantastic news! I can't wait to get home to try it!!:cool: If/when you get a chance, can you please let me know how to change the sound cards order in alsamixer? I would like to have the IQAudio DAC to be card 0 and not card 1. Thanks a lot guys for your continuous and great work! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi Greg/Steen, I really hope you can help me out. I have got the IQAudio Pi-Dac Zero and Pi-DAC ZeroHP and I am trying to compile the utilities to get the rotary encoder up and running. Problem being that I am not able to install the GCC package at all. From the Extension tab I get the following error message: Code: Downloading: gcc.tcz gcc.tcz: FAILED Error on gcc.tcz I have also tried to install gcc manually but to no avail: Code: tc@piCorePlayer:~$ tce-load -wi compiletc Downloading: compiletc.tcz Connecting to distro.ibiblio.org (152.19.134.43:80) wget: server returned error: HTTP/1.1 404 Not Found md5sum: compiletc.tcz.md5.txt: No such file or directory Error on compiletc.tcz When you get a chance, would you please be so kind as to advise on that? I do understand it is not an issue related to piCorePlayer at all, but any help would be very much appreciated:cool: Thanks a lot! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] $9.00 Next Thing "getchip" Logitech Media Server
dustinsterk wrote: > I have successfully installed LMS on a $9.00 Next Thing getchip > (http://getchip.com/). This is a great little device for a LMS, now > using it full time for my home setup: > > See my post for instructions: > http://www.thesterk.com/9-00-next-thing-getchip-logitech-media-server/ > > With this device, plus a few Chromecast Audio's and the following plugin > (http://forums.slimdevices.com/showthread.php?104614-Announce-CastBridge-integrate-Chromecast-players-with-LMS-(squeeze2cast)), > you can have a full system for under $100! > > Happy Listening. Hi dustinsterk, You are making me feel very jealous as I have placed the order back in Nov but I am still waiting for it to be delivered here in the UK in June:mad: I am glad to hear that you successfully installed LMS and thanks for sharing your experience. I just can't wait for it! Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105235 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
ralph1471 wrote: > Hi > > Thanks to everyone who has been working on picoreplayer, it seems to be > just what I was looking for! I am a bit of a newb so I apologies in > advance for this question and if it has already been covered here (I > have had a look but I cant see anything on this forum). > I am using a Pi Zero with a PhatDAC attached. I am also using an Anker > USB to Ethernet adaptor (I suspect this is the cause of the problem). I > have attempted to boot the pi using both of the new releases of > picoreplayer (2.00 and 2.01). Both have booted up, but seem during this > process it shows waiting for network .. Done (22). To me this > suggests that it is timing out, would that be correct? The pi does not > show up on my router under the list of connected devices. My guess is > that there is a driver issue with the USB Ethernet adaptor I am using. > If anyone has any suggestions for ways I could fix this it would be > greatly appreciated. > > I also have a wifi dongle I could use but it is not on the supported > list. (its a NETGEAR WNA3100M). > > Thanks! Hi, I have had a similar issue in the past and Greg helped me to sort it out. Read here: http://forums.slimdevices.com/showthread.php?105018-Announce-piCorePlayer-2-00/page21 -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Greg Erskine wrote: > You don't get a login prompt on the console. It should be logged on as > tc, just press enter. Oops..that did the trick indeed:o I am now able to answer your question;) Raspberry Pi - Model: ZERO piCorePlayer - Version: 2.01 as already reported by other users. Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Greg Erskine wrote: > hi albertone74, > > For the wifi setup, did you set your wifi details in config.cfg or > newconfig.cfg. The CLI setup command may help you if you have the > monitor and keyboard working. I use the newconfig.cfg on the SD card > using my PC method. > > regards > Greg Hi Greg, There is something strange as after the the RPi0 boots up then I don' t get the login prompt. When you get a chance can you please let me know what else I can look at? Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Greg Erskine wrote: > Hi Raspberry Pi Zero users, > > If any of you have a minute, can you have a look at what piCorePlayer > identifies the RPi0 as. > > On the [Main] page, turn [Beta] mode on. > Press [Diagnostics], then click on the [Raspberry Pi] tab. > > If you could let me know: > > Raspberry Pi - Model: > piCorePlayer - Version: > > thanks > Greg Hi Greg, I did want to check that info for you but it seems that the RPi0 doesn't get an IP address assigned. This happens with both wifi and ethernet connections. I have tried to dd the piCorePlayer image several times but to no avail. I connected the RPi0 to my TV via the HDMI cable and I can see that it boots up but there is no way that an IP address gets assigned to the RPi0. I have also tried to reboot the router. Any suggestions, please? Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
sbp wrote: > This is exactly what have been described in the raspberry forum - it is > either "on" or "off" around that value (127) without any effect on > brightness. So it could be interesting to know if our users have > different experience with this - and why there could such a difference? > > Steen Hi Steen, Same here. It is either on or off. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 23 image for wandboard?
asplundj wrote: > Anyone? Hi, See my previous post: http://forums.slimdevices.com/showthread.php?104568-Fedora-22-on-Wandboard-Dual Let me know if it works for you, i always failed;) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=104836 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 22 on Wandboard Dual
JackOfAll wrote: > No. I was trying to think back to decide whether I'd ever booted a > "stock" F22 on a Dual. I have 2 Quads, a revision B1 and C1. They stay > powered 24/7. Think that's probably all I've been using for the last > year. Don't think the Dual has been taken out of the drawer and powered > up since the time of F21. I see, thanks for confirming Clive at least I din't do any mistakes:cool: Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=104568 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 22 on Wandboard Dual
JackOfAll wrote: > Alberto, > > You don't see anything on the serial console? Is it even trying to boot? > > I'm tempted to say "try my F23 image", but I've only been running that > on Quad's and haven't actually tested the new SPL uboot with a Dual, > which I should probably do first, before suggesting anyone else try it. > (F23 uses SPL uboot which means it detects board, ie. solo,dual,quad and > revision at runtime, when it boots and chooses the appropriate setup and > dt config, rather than the F22 uboot, where the dt file to use was > hardcoded into one of three board specific uboot binaries which you > would choose at install time.) I'll try and get that tested on a > DualLite before the weekend and PM you a link to an image. Hi Clive, That would be muuuch appreciated! Just can’t wait for it :) BTW no messages at all on the serial console. ISTR that long time ago I have followed the same steps to install Fedora on my Wandboard Quad and it did work. Did you actually see any mistakes in the above steps? Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=104568 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Fedora 22 on Wandboard Dual
Hi,
I would appreciate if someone could help me with the below issue:
I have been trying to install F22 on my Wandboard Dual. These are the
steps I have been following:
Code:
sudo fdisk /dev/mmcblk1
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): o
Building a new DOS disklabel with disk identifier 0xd31d9133.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-15564799, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-15564799, default 15564799):
Using default value 15564799
Partition 1 of type Linux and of size 7.4 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Code:
sudo parted /dev/mmcblk1
GNU Parted 3.1
Using /dev/mmcblk1
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: SD SD08G (sd/mmc)
Disk /dev/mmcblk1: 7969MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End SizeType File system Flags
1 1049kB 7969MB 7968MB primary ext3
(parted) toggle 1 boot
parted) print
Model: SD SD08G (sd/mmc)
Disk /dev/mmcblk1: 7969MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End SizeType File system Flags
1 1049kB 7969MB 7968MB primary ext3 boot
Code:
xzcat Fedora-Minimal-armhfp-22-3-sda.raw.xz | sudo dd of=/dev/mmcblk1
Code:
sync
Code:
sudo partprobe /dev/mmcblk1
Code:
sudo mkdir /tmp/root
Code:
sudo mount /dev/mmcblk0p3 /tmp/root
Code:
sudo dd if=/tmp/root/usr/share/uboot-wandboard-dl/u-boot.imx
of=/dev/mmcblk1 bs=1k seek=1 conv=fsync
Code:
sync
I have tried several times but to no avail. Any help would be much
appreciated! :)
Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8,
iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio
Azur 640C V2, Mission M34i.
Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7,
Little Doc DAC I, Little Dot III, AKG K 702.
----
albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863
View this thread: http://forums.slimdevices.com/showthread.php?t=104568
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
albertone74 wrote: > Hi Steen, > > Very well done to you, Greg and Ralphy. Excellent job indeed! > > I would like to report something. A few hours ago I managed to upgrade > from 1.21b to 1.21g and everything worked like a charm. Touch working > great! > > Then I decided to start everything from scratch with a fresh install and > after downloading the latest image for 1.21g the system does not boot up > at all. I also tried with different SD cards but to no avail. Then I > tried with a 1.21b image but every time I try to update in situ from > 1.21b to 1.21g the update process fails. Again I tried several times > this procedure but no luck at all. > > Many thanks. Hi Steen, All working now. I seriously don't know what went wrong before. Go and figure :) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
albertone74 wrote: > Hi Steen, > > Very well done to you, Greg and Ralphy. Excellent job indeed! > > I would like to report something. A few hours ago I managed to upgrade > from 1.21b to 1.21g and everything worked like a charm. Touch working > great! > > Then I decided to start everything from scratch with a fresh install and > after downloading the latest image for 1.21g the system does not boot up > at all. I also tried with different SD cards but to no avail. Then I > tried with a 1.21b image but every time I try to update in situ from > 1.21b to 1.21g the update process fails. Again I tried several times > this procedure but no luck at all. > > Many thanks. Hi Steen, All working fine. I seriously don't what went wrong before...go figure;) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
sbp wrote: > > > > > So please try version *1.21g*... > > > > > > Hi Steen, Very well done to you, Greg and Ralphy. Excellent job indeed! I would like to report something. A few hours ago I managed to upgrade from 1.21b to 1.21g and everything worked like a charm. Touch working great! Then I decided to start everything from scratch with a fresh install and after downloading the latest image for 1.21g the system does not boot up at all. I also tried with different SD cards but to no avail. Then I tried with a 1.21b image but every time I try to update in situ from 1.21b to 1.21g the update process fails. Again I tried several times this procedure but no luck at all. Many thanks. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Hi guys, Can someone please advise on the best way to create a backup of the SD card where SoA is installed? Would be this the correct way? Code: dd if=/dev/sdX of=/path/to/backup bs=512 conv=noerror,sync Thanks a lot! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 21 REMIX for Raspbery Pi 2B
JackOfAll wrote: > Anyone with a Pi2B, a spare 8GB card I'd like to draw your attention > to this post on the RPi forum, 'Fedora 21 REMIX for Raspbery Pi 2B' > (http://www.raspberrypi.org/forums/viewtopic.php?f=51&t=101027). It > seems someone has made a bunch of Fedora remix images for the Pi2B. > > H. I wonder how easy it would be to type "yum install > logitechmediaserver" or "yum install squeezelite" from the cmd line, > having booted the xfce image? ;) > > At some point in the future there could be a "squeeze" flavored image. > For now, if you want to go down this path, you'll have to edit the > config files yourself, etc. etc. There isn't a web gui at the moment. > Start with the xfce image. (You don't need unix admin skill levels to > get this working, but it is beyond a user who expects a shrink-wrapped > solution. So, for the moment, devs or advanced users) Hi Clive, That's s cool:cool: Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=103188 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > I've added a few more strings in the latest version - could you add > these. Sorry missed this file in the update, but will add now. > > > Code: > > > squeezelite > vol_max > EN: Max > alsa_volume > EN: Alsa Volume > volume_control_tip > EN: Alsa volume control to adjust (optional) > vol_adjust > EN: Adjust > volume_function_tip > EN: Max to set to alsa control to maximum and use software volume within player, Adjust to use alsa control for player volume (optional) > > > Hi Triode, There it is. Please find attach it.;) +---+ |Filename: Strings-IT.lua.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=17239| +---+ Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Thanks. I'm afraid there are a couple more now in the latest version - > these ones below + the additional help text for them. > > > Code: > > > update > ffmpeg > EN: WMA/ALAC Support > system > locale > EN: Locale > > > Hi Triode, I have updated the system but I cannot locate the new changes you mentioned in the file Strings-EN.lua (i.e. EN: WMA/ALAC Support). Maybe something went wrong with the update. Not too sure. Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Thanks. I'm afraid there are a couple more now in the latest version - > these ones below + the additional help text for them. > > > Code: > > > update > ffmpeg > EN: WMA/ALAC Support > system > locale > EN: Locale > > > No probs Triode. I will updated it again to incorporate the latest changes.;) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > I've added a few more strings in the latest version - could you add > these. Sorry missed this file in the update, but will add now. > > > Code: > > > squeezelite > vol_max > EN: Max > alsa_volume > EN: Alsa Volume > volume_control_tip > EN: Alsa volume control to adjust (optional) > vol_adjust > EN: Adjust > volume_function_tip > EN: Max to set to alsa control to maximum and use software volume within player, Adjust to use alsa control for player volume (optional) > > > Hi Triode, Please find attached the up to date Italian translation. ;) +---+ |Filename: Strings-IT.lua.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=17222| +---+ Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Hi Triode, Please find attached the updated Italian translation, as promised;) +---+ |Filename: Strings-IT.lua.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=17127| +---+ Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > That looks like a problem with your internet connection/dns. > > I will restart the router just in case...now I am waiting to the music > scan to complete;) > > you can get the missing strings running: > > Code: > > > adrian@mac:~/soa-web$ ./soa-web.lua --missing IT > update > reinstall_desc > EN: Erase and completely reinstall Squeeze on Arch > clean2 > EN: Full Clean > reinstall > EN: Reinstall SoA > reinstall_check > EN: Erase device and completely reinstall Squeeze on Arch? > clean1 > EN: Partial Clean > > > OK. Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > I've upgrade the install images to improve the speed of installation of > SoA. > > Please let me know how you get on > > Hi Triode, I have installed the new image by downloading it as per post #1. The installation lasted in total 12 min circa on my quad qandboard. WOW! That's great many thanks for that and congratulations for this big improvements. Also I have installed LMS 7.9. The installation was incredibly fast..I believe less than 30min. That's fantastic. It was used to take ages before;) I tried to reboot the quad several times and overtime it worked like a charm! Just to report that after clicking on the update button I get the following: Code: synchronising scripts fatal: unable to access 'https://github.com/SqueezeOnArch/soa-aur.git/': Could not resolve host: github.com :: Synchronizing package databases... error: failed retrieving file 'core.db' from mirror.archlinuxarm.org : Could not resolve host: mirror.archlinuxarm.org error: failed to update core (download library error) error: failed retrieving file 'extra.db' from mirror.archlinuxarm.org : Could not resolve host: mirror.archlinuxarm.org error: failed to update extra (download library error) error: failed retrieving file 'community.db' from mirror.archlinuxarm.org : Could not resolve host: mirror.archlinuxarm.org error: failed to update community (download library error) error: failed retrieving file 'alarm.db' from mirror.archlinuxarm.org : Could not resolve host: mirror.archlinuxarm.org error: failed to update alarm (download library error) error: failed retrieving file 'aur.db' from mirror.archlinuxarm.org : Could not resolve host: mirror.archlinuxarm.org error: failed to update aur (download library error) error: failed retrieving file 'soa-repo.db' from github.com : Could not resolve host: github.com error: failed to update soa-repo (download library error) error: failed to synchronize any databases error: failed to init transaction (download library error) ==> Making package: logitechmediaserver-7.9-lms 1-1 (Thu Jan 8 19:41:45 GMT 2015) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Updating slimserver git repo... Fetching origin fatal: unable to access 'https://github.com/Logitech/slimserver.git/': Could not resolve host: github.com error: Could not fetch origin ==> WARNING: Failure while updating slimserver git repo -> Found service -> Found install ==> Validating source files with sha1sums... slimserver ... Skipped service ... Passed install ... Passed ==> Extracting sources... -> Creating working copy of 7.9 git repo... Cloning into 'slimserver'... done. Also I would like to review the italian translation based on the recent changes to the GUI (ie.Reinstall SoA). Can you please send me the file so that I can update it?:cool: Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
albertone74 wrote: > Hi Triode, > > Thanks for the updates. I have tried the latest images on my dual/quad > Wandboard. No issues at all.;) EDIT: Maybe it is just my impression, but it looked like LMS 7.9 installed faster:cool: Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > I've updated the install images to hopefully be slightly more resilient > during the install. You should not notice the difference, but if you > see problems during installation please post here. > > The changes are to protect against a couple of cases I saw yesterday: > - if the arch repo is updated mid install it is possible the installer > keeps looping trying to find the old file > - if sourceforge.net is having problems and serving an error message > rather than a file then this was not being retried correctly - leading > to the install locking up > > I think both of these should be fixed by the updated installers. Hi Triode, Thanks for the updates. I have tried the latest images on my dual/quad Wandboard. No issues at all.;) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Nerdwebber wrote: > I'm sorry Triode. I don't know how to do this. I'm just an end user. :( Nerdwebber, just run the following command from your command line: Code: pacman -R alsa-utils as previously suggested by Triode. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Thanks - are these problems avoided if alsa-utils are uninstalled? I > may make this the default case as we didn't seem to have these issues > previously. > > Edit - reread what you said - I found that alsamixer volume doesn't > actually impact my dac. Note you need to change to the correct card > using F6 if you use alsa mixer before adjusting the volume. > > I suspect alsactl store needs to be told only to store state for the > cards we are interested in. The following command: Code: alsactl store 3 did the trick indeed Triode and I have now managed to save the volume settings of my DAC (card 3 in my case). Having said that though, I can confirm that alsamixer volume doesn't actually impact my DAC as even when I lower the volume down to 0% in alsamixer, nothing happens as I can still listen to my music. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > For these volume issues - is there a change if you do: > > Code: > > > pacman -R alsa-utils > > > > then reboot? > > I've just checked and the default pcm volume from alsamixer is much > less than 100% with this installed. > > Edit - testing with my Audiolab MDAC against Wandboard and RPI shows > subjectively the same volume on both with the output as hw:CARD=MDAC. > The alsamixer volume for pcm for this output does not seem to impact > this. > > What output alsa device are people using with the volume problems? Hi Triode, I have did some tests with alsamixer (on wandborad dual/quad) with both my DACs . What I have found out is that even in my case the default pcm volume from alsamixer is much less than 100% with alsamixer installed, indeed it is set to 46%. The interesting thing is that even when I try to set the volume to 100% nothing happens to the volume. Alsactl store doesn't seem to work either: Code: alsactl: get_control:256: Cannot read control '3,0,0,IEC958 Capture Default,0': Resource temporarily unavailable Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
albertone74 wrote: > Triode, > > Thanks for coming back to me. No it doesn't say more than that. I will > try it again (with the new image as well), as soon as I get home tonight > and will report back. Hi Triode, Good news here. The LMS 7.9 installation went well this time! I do love the progress bar which has been shown correctly on safari as well. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Does it say any more than that? I will check and see if LMS is building > for me at present. Triode, Thanks for coming back to me. No it doesn't say more than that. I will try it again (with the new image as well), as soon as I get home tonight and will report back. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > SoA installer images have been updated to hopefully avoid the IP address > changing on final reboot. Please test and post feedback here. Hi Triode, Thanks for the new image. I have downloaded and installed it. The only issue I have been experiencing in the last few days is that I am not able to download/install LMS 7.9. Indeed overtime I try I get the following and nothing happens: > sychronising scripts > Already up-to-date. > ==> Making package: logitechmediaserver-cpan 7.9-1 (Sun Nov 30 21:17:03 > GMT 2014) > ==> Checking runtime dependencies... > ==> Checking buildtime dependencies... > ==> Retrieving sources... > -> Cloning slimserver-vendor git repo... > Cloning into bare repository > '/root/soa-aur/logitechmediaserver-7.9-cpan/slimserver-vendor'... > Any advice on this? Many thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
bobertuk wrote: > hdparm parameters aren't sticky' so are lost at hard and soft resets. So > to always force HDD into standby... > > pacman -S cron > pacman -S hdparm > > Use 'crontab -e' to edit the cron config file > > You will need to be familiar with Unix 'vi' or 'nano' to edit the file - > it's a bit quirky > > Add the line > @reboot /usr/bin/hdparm -B127 -S240 /dev/sda1 > > OR > > Edit the file directly... > /var/spool/cron/root > > You may need to create the file 'root' it first and past in the > following... > > # Edit with "crontab" for proper functionality, "man 5 crontab" for > formatting > # > # mm hh DD MM W /path/progam [--option]... ( W = weekday: 0-6 > [Sun=0] ) > # > @reboot /usr/bin/hdparm -B127 -S240 /dev/sda1 > > > Then reboot Wandboard. > > -B127 sets APM to allow HDD TO go into standby > -S249 sets timeout of 20 minutes > /dev/sda1 is the hard drive > > Use 'man hdparm' and 'man cron' for details of usage. Be careful if you > change the numeric parameters - they aren't all as obvious as it may > seem. > > Hope that helps. > > Bob Hi Bob, Many thanks for your very useful notes. I will give it a go in the weekend. Thanks again! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
bobertuk wrote: > Hi all, > > Haven't tried to let Wandboard 'sleep' yet as I don't know if it has > Wake On Lan available. Anyone tried this yet? > > Bob Hi Bob, I am afraid it is not possible to do that. In fact when I bought my first Wandboard Dual I contacted the manufacturer and they confirmed that the WOL is not supported:( Just out of interest how did you manage to force your HDD into standby after a predefined time of inactivity? Did you use hdparm at all? Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > I've updated the wandboard installer images and added one for a > cubox-i/hummingboard. Latest images are at: > > Code: > > > https://github.com/SqueezeOnArch/soa-installers/raw/master/soa-image-wand-dual.img.zip > https://github.com/SqueezeOnArch/soa-installers/raw/master/soa-image-wand-quad.img.zip > https://github.com/SqueezeOnArch/soa-installers/raw/master/soa-image-cubox-i.img.zip > > > > > The update should fix the problem only using the second half of an 8G > card (and potentially a problem not working with a 4G card) Hi Triode, I am have been away from this forum for a while and I am now ready the test the new images. I have just downloaded the image for the dual. Is that normal that its size is only 12.6 MB?? Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
bobertuk wrote: > Sounds good to me. Most common use is going to be USB but some (like me) > will try using SATA. I only started using SoA about a week ago and it > seems easy to use already. Adding capability for using with SATA makes > it more flexible. > > Bob Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode, I have created a new image and installed all the packages from the SoA Update page and everything worked like a charm (LMS 7.9 included). Everything is working well, as expected.:cool: Thanks! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Thanks for testing - this project definitely needs testers! I suspect > it depends how fast your internet connection is whether the download > really causes you a problem or is only 10 minutes out of the much longer > time to build lms or the kernel. > > Anyway - please report back test finding, there have been a number of > changes today including the ability build and install the custom kernel > from the web interface (if you need more spdif sample rates) You can definetely count on all of us Triode!;) I think you might be right about the internet connection issues. Yep a very nice surprise the ability to install the custom kernel from the web interface. That's great Triode! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
kesey wrote: > albertone74, I would suggest having created the SDCard and installed SoA > that you reboot. Then take the SDCard out and back it up to your hard > disk. I've installed LMS a couple of times now without any hick ups and > without having to do this, but it would save a lot of effort and > downloading (although the LMS part is the bigger part) being able to > restore the card from backup and not do a full re-create it in the event > of install failure. > > Then again you're probably doing the backup already:-) Hi kesey, Thanks. It's definitely a good point but I can't help myself to test and start everything from scratch every time Triode makes some changes to his script..that's why a bought another SD card to play with. Actually I have got so many SD cards that every time I struggle to remember what is installed on which:) This way I hope we can help him with this great project. BTW after a fresh re-install I finally managed to get LMS 7.9 up and running:cool: Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > That's strange - squeezelite should be installed by default, jivelite > not installed by default. Let me test it again. OK. Thank you Triode. I am also struggling to install LMS 7.9. It says that installation has been completed but from the Status page in SoA it says is dead (I have tried to enable/restart it). I have already tried several times. I will try tonight to make a new image and I will report back to you. Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > OK will fix in the create-sdcard script tomorrow. Hi Triode, Thanks for updating the create-sdcard script. I have just tried and it worked like a charm. Just a note. You might have done it on purpose but just to let you know that Squeezelite wasn't installed by default as per previous versions of the script. Cheers. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > OK will fix in the create-sdcard script tomorrow. Cool!Good stuff! Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > OK - looks like arch has updated the linux kernel and this uses > different filenames for the wifi functions. Could you try copying > brcmfmac-sdio.txt to brcmfmac4329-sdio.txt and rebooting (this is > assuming you don't have a rev C board) Fab! That did the trick Triode. Many thanks!;) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Thats interesting - did you create the sd card using the create script > at the start of this thread - that should install the necessary files to > make the wlan interface appear. > > Edit - sorry see you said you did that - can you check what files are in > /lib/firmware/brcm/ ? There we go Triode: Code: bcm4329-fullmac-4.bin brcmfmac43241b0-sdio.bin brcmfmac43362-sdio.bin bcm43xx-0.fw brcmfmac43241b4-sdio.bin brcmfmac4354-sdio.bin bcm43xx_hdr-0.fw brcmfmac4329-sdio.bin brcmfmac-sdio.bin brcmfmac43143.bin brcmfmac4330-sdio.bin brcmfmac-sdio.txt brcmfmac43143-sdio.binbrcmfmac4334-sdio.bin brcmfmac43236b.binbrcmfmac4335-sdio.bin Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Hi - the new version auto detects which interfaces are present. Can you > ssh to the wandboard and type "ip link" what does it say? There we go: Code: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:1f:7b:b2:03:59 brd ff:ff:ff:ff:ff:ff Just out of curiosity I put back the 'old' SD Card and the Wireless Interface page shows up as expected. Thanks. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Hi Triode, I have been experiencing something strange today. I have bought a new 16GB SanDisk SD Card and I have created a new image by following the create-sdcard script in post #1. Problem being that the Wireless Network page didn't show up at all within the SoA web page (please refer to the attached snapshot). I have tried to create a new image but still with no luck. Any ideas? Cheers +---+ |Filename: Screen Shot 2014-07-18 at 20.23.00.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=16170| +---+ Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
kesey wrote: > albertone74, if you use the Wandboard as above, the process is pretty > automatic, and you do not need to get into choosing locations like > mmcblk1 and mmcblk1p1. I see thank you kesey. Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > If you use the create-sdcard script then it should already be > partitioning the card with all sectors in the root partition. That's good to know. Thanks. Is that normal what I am getting here? Code: [root@wbdual ~]# fdisk /dev/mmcblk0p1 Welcome to fdisk (util-linux 2.24.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Device does not contain a recognized partition table. Created a new DOS disklabel with disk identifier 0xd6cf18f3. Command (m for help): Triode wrote: > > BTW - I'm hoping you can help me with some updated translations soon...? Sure, please just send me the file as usual;) Primary system: Squeezebox Touch/Wandboard Quad with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Wandboard Dual with SoA, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > > > Please test and let me know how well you think it works... Hi Triode, I have created a new image by following the create-sdcard script in post #1. Everything is working like a charm on my WBDUAL. I have also installed LMS 7.9 . No issues at all with the WIFI connection and the update page is just great. Just a kind request. Any chance in the future to add a page in the web interface in order to expand the Root Partition and Fill the SD Card? At the moment I am using GParted to resize the partitions. Thank you and well done for all these improvements with SOA! Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > I've updated to hopefully fix 2. Can you test and give me more details > on one? > > Triode, I can confirm that in my case I am not having that issue anymore. Thanks! Triode wrote: > > > I need to look at nfs later. How many people really want an nfs mount? I am not particularly interested in nfs mount. Thanks. Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. -------- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Krisbee wrote: > Triode, > > Errors on storage.html ? Something seems to have happened at the update > to soa-web a couple days ago. > > Can you reproduce these errors? > > Krisbee, Same here. Thanks Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > The one which says it has FAILED in your log Ok thanks. I have deleted that file and I am now re-installing LMS...so far it seems it is doing its job:) I will let you know how it goes at the end... Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > That says one of your files are corrupted. I'd try deleting and > rerunning. I see Triode thanks. Can you please tell which files I am supposed to delete format here? > [root@alarm logitechmediaserver]# ls > install PKGBUILD slimserver-vendor > logitechmediaserver-7.8.0.tgz service src Thanks! Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
albertone74 wrote: > Yes I did and unfortunately with no luck at all. As posted before I am > just installing LMS again. Hope everything goes well this time! I will > report back as soon as the installation gets completed, if it does;) EDIT: This is what I have got now: > [root@alarm soa-aur]# ./soa-update.sh logitechmediaserver > Already up-to-date. > ==> Making package: logitechmediaserver 7.8.0-4 (Wed Jun 11 14:32:46 MDT > 2014) > ==> Checking runtime dependencies... > ==> Checking buildtime dependencies... > ==> Retrieving sources... > -> Downloading logitechmediaserver-7.8.0.tgz... > ** Resuming transfer from byte position 60649472 > % Total% Received % Xferd Average Speed TimeTime Time > Current > Dload Upload Total SpentLeft > Speed > 100 58.7M 100 58.7M0 0 214k 0 0:04:40 0:04:40 --:--:-- > 199k > mv: cannot stat > ‘/root/soa-aur/logitechmediaserver/logitechmediaserver-7.8.0.tgz.part’: > No such file or directory > -> Updating slimserver-vendor git repo... > Fetching origin > remote: Reusing existing pack: 1898, done. > remote: Counting objects: 17, done. > remote: Compressing objects: 100% (17/17), done. > remote: Total 1915 (delta 9), reused 3 (delta 0) > Receiving objects: 100% (1915/1915), 490.57 MiB | 246.00 KiB/s, done. > Resolving deltas: 100% (1102/1102), done. > From https://github.com/Logitech/slimserver-vendor > * [new branch] public/7.3 -> public/7.3 > * [new branch] public/7.4 -> public/7.4 > * [new branch] public/7.5 -> public/7.5 > * [new branch] public/7.5.2 -> public/7.5.2 > * [new branch] public/7.6 -> public/7.6 > * [new branch] public/7.6_lms -> public/7.6_lms > * [new branch] public/7.7 -> public/7.7 > * [new branch] public/7.8 -> public/7.8 > * [new branch] public/7.9 -> public/7.9 > * [new branch] public/develop -> public/develop > * [new branch] public/feature/7.7-perl516 -> > public/feature/7.7-perl516 > * [new ref] refs/pull/1/head -> refs/pull/1/head > * [new ref] refs/pull/1/merge -> refs/pull/1/merge > * [new ref] refs/pull/3/head -> refs/pull/3/head > * [new ref] refs/pull/3/merge -> refs/pull/3/merge > * [new ref] github/public/7.3 -> github/public/7.3 > * [new ref] github/public/7.4 -> github/public/7.4 > * [new ref] github/public/7.5 -> github/public/7.5 > * [new ref] github/public/7.5.2 -> github/public/7.5.2 > * [new ref] github/public/7.6 -> github/public/7.6 > * [new ref] github/public/7.6_lms -> github/public/7.6_lms > * [new ref] github/public/7.7 -> github/public/7.7 > * [new ref] github/public/7.8 -> github/public/7.8 > * [new ref] github/public/develop -> github/public/develop > * [new ref] github/public/feature/7.7-perl516 -> > github/public/feature/7.7-perl516 > -> Found service > ==> Validating source files with sha1sums... > logitechmediaserver-7.8.0.tgz ... FAILED > slimserver-vendor ... Skipped > service ... Passed > ==> ERROR: One or more files did not pass the validity check! Thanks! Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > This doesn't look to have finished building - there are no errors here > which would prevent it completing, so I assume the device has stopped > for some other reason or it is still running - have you checked again > later? Yes I did and unfortunately with no luck at all. As posted before I am just installing LMS again. Hope everything goes well this time! I will report back as soon as the installation gets completed, if it does;) Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Krisbee wrote: > > > Did you get your LMS to complete? Out of interest what size/class of SD > card were you using? What freq were CPU cores running at? > I believe the installation got stuck at some point. I am trying to install LMS again, as I write. I am using a 16 GB SandDisk SD card on a Wandboard Dual. Krisbee wrote: > > Once you've created your new SD card which has soa-aur, copy the saved > two files back to "/root/soa-aur/logitechmediaserver". Then you can > install LMS with the ./soa-install-lms.sh script, e.g: > Great. Thanks for the tip. Next time I will follow your advice;) Primary system: Wandboard Quad/Dual with CSOS F19 R8, iPengHD/Squeezepad on iPad3, Rega DAC, Virtue Audio One, Cambridge Audio Azur 640C V2, Mission M34i. Secondary system: Squeezebox Touch, Orange Squeeze on Nexus 7, Little Doc DAC I, Little Dot III, AKG K 702. ---- albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
