Re: [SlimDevices: Unix] Will not start on OpenSUSE Leap 15
jarome wrote: > Did you go into Yast2 and turn it on in the System Services panel? Yes, but that gave me an unspecified error. So i tried to do it manually. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=109091 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Will not start on OpenSUSE Leap 15
For me, it is still not working as it should be. i created the file /etc/SuSE-release and reinstalled the software I can now manually start the service with Code: systemctl start logitechmediaserver.service but it won't start on boot. Code: systemctl enable logitechmediaserver.service gives me the error: Code: Failed to enable unit: Unit /run/systemd/generator.late/squeezeboxserver.service is transient or generated . Am I the only one who can't have it start on boot? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=109091 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Since the last update i'm experiencing play back problems. Im using a Raspberry Pi B+ with a Hifiberry Digi+ board. Sound stops after a few seconds and after a while the music will start again. For a short time though. With SOA from a month ago everything played perfectly. I'm not shure where to look. It could be the 3.18 kernel, the Digi+ drivers. Changing buffer size doesn't seem to make any difference. Error logs give me some of these messages but i'm not shure what they mean: [23:25:17.232199] stream_thread:278 poll timeout [23:25:17.332731] stream_thread:278 poll timeout [23:25:17.433246] stream_thread:278 poll timeout Any suggestions? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > New SoA install images are available for all supported platforms - > please upgrade > > Please note that previous images will no longer update by just pressing > the update button. If you installed in the last couple of days then you > can "Reinstall SoA" from the update page. Otherwise you will need to > manually download the new image from the locations in the first post on > this thread and reflash your sdcard. > > (as pointed out earlier today a change in the Arch repository meant that > I needed to break the update mechanism with these new images) > > I've depreciated the old install scripts for the supported platforms to > avoid maintaining them alongside the install images. > > Please post feedback here. For me a new install went well. I use a Pi B+ in combination with a Hifiberry Digi+. I only use SOA as a player. But I noticed that alsa-utils isn't installed by default. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Shutdown wrote: > Hello > I had SoA working on a Rpi with a usb dac. > Now i installed a hifiberry digi on the Pi and now there is no sound. > There are only 2 devices i can choose hw.hifiberry and, hw.alsa both not > working. > did a complete reinstall and updated to the last kernel. but no sound. > > It is not the hardware, picoplayer plays without problems. > > Any ideas what to try? If you use the updated kernel you have to uninstall that one and get back to the original kernel. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Is this server announced by your dhcp server or do you recognize it? I reconfigured the ntp settings on my server and tried to install SOA again. This time it all went flawlessly, so yes we can blame my not-working timeserver. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
I got my Digi+ working as well but had had to downgrade to the original kernel. With the updated kernel the card was not loaded. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
It seems to be just as simple as that. While SOA was intalling I connected using putty. disabled timedatectl (timedatectl set-ntp false), edited /etc/systemd/timesyncd.conf en restarted timedatectl. And within a few minutes the install completed! Considering my Hifiberry Digi+, there is an Audio Device hw:CARD=sndrpihifiberry. But still no sound, my DAC isn't locked from the spdif, so i have to dig into that now. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Sorry but the exact moment when the looping starts is hard to catch. The journalctl starts again after the restart and I just missed the end. Squeezelite was not installed. It said something about an invalid htpps certificate. Sorry that i can't be more specific but an install on the pi takes more than an hour. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
In the attachment you will find the outcome. I may not be complete as the installer loops after a while but i hope this is helpfull. +---+ |Filename: install-soa-rp.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=17023| +---+ pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Yes, i did try the install image 3 times. But i kept getting lots of different errors. I will be happy to try it again if you can show me how to capture the output to a log file. Now i have SOA up and running although my Hifiberry Digi+ isn't working. It would be nice if SOA would make it to this page: http://www.hifiberry.com/guides/supportedsoftware/. I only have the hw:CARD=ALSA option. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
pimd wrote: > I finally got SOA installed. The install script didn't do it for me so i > tried a manual install explained in post #1. I'm on a Raspberry Pi B+. > > However Squeezelite Player doesn't work > > It says: Status loaded / enabled; vendor preset: disabled > Active inactive / dead > Well, I did a complete new (manual) install. At first squeezelite failed to install, but the webinterface was up. So tried to install squeezelite from the Upgrade page. The first try failed but after the second time Squeezelite is Loaded/enabled and Active/running. I had to fill in the ip address of my LMS otherwise the SOA player was not seen by the server. Next step is to make my Hifiberry Digi+ work pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
I finally got SOA installed. The install script didn't do it for me so i tried a manual install explained in post #1. I'm on a Raspberry Pi B+. However Squeezelite Player doesn't work It says: Status loaded / enabled; vendor preset: disabled Active inactive / dead and [root@alarmpi ~]# systemctl status squeezelite * squeezelite.service - Squeezelite Player Loaded: loaded (/usr/lib/systemd/system/squeezelite.service; enabled; vendor preset: disabled) Active: inactive (dead) since Wed 2014-12-10 23:18:02 CET; 6min ago Process: 397 ExecStart=/usr/bin/squeezelite $OPTIONS $NAME $MAC $PRIORITY $MAX_RATE $AUDIO_DEV $BUFFER $CODEC $ALSA_PARAMS $LOG_FILE $LOG_LEVEL $UPSAMPLE $DOP $VISULIZER $SERVER_IP (code=exited, status=0/SUCCESS) Main PID: 397 (code=exited, status=0/SUCCESS) Dec 10 23:18:01 alarmpi squeezelite[397]: attenuation = attenuation in dB to apply (default is -1db if not explicitly set), Dec 10 23:18:02 alarmpi squeezelite[397]: precision = number of bits precision (NB. HQ = 20. VHQ = 28), Dec 10 23:18:02 alarmpi squeezelite[397]: passband_end = number in percent (0dB pt. bandwidth to preserve. nyquist = 100%), Dec 10 23:18:02 alarmpi squeezelite[397]: stopband_start = number in percent (Aliasing/imaging control. > passband_end), Dec 10 23:18:02 alarmpi squeezelite[397]: phase_response = 0-100 (0 = minimum / 50 = linear / 100 = maximum) Dec 10 23:18:02 alarmpi squeezelite[397]: -D [delay] Output device supports DSD over PCM (DoP), delay = optional delay switching between PCM and DoP in ms Dec 10 23:18:02 alarmpi squeezelite[397]: -v Visualiser support Dec 10 23:18:02 alarmpi squeezelite[397]: -z Daemonize Dec 10 23:18:02 alarmpi squeezelite[397]: -t License terms Dec 10 23:18:02 alarmpi squeezelite[397]: Build options: LINUX ALSA EVENTFD RESAMPLE VISEXPORT DSD LINKALL [root@alarmpi ~]# Any ideas what to do? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > Hum that could indicate a problem perhaps with the sdcard - do you have > any others to try? You are right. I tried another card and at this moment the installer is fetching Arch Linux. Thanks a lot for your help. I'm only a bit disappointed now because the first sd card i used was brand new.:( pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
No sorry, i don't have a monitor or anything so i can't check any output except for the webinstaller. I do have internet connection, i tried the picoreplayer and that works. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
Triode wrote: > How long are you waiting - it can take a minute or two at that stage. At least half an hour... pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeeze on Arch - developer version
I have problems installing SOA. The installer always hangs on "Creating disk partion" My gear: Raspberry Pi B+, Kingston sdcard 16gb class 10. What did I do? Flash the latest SAO image with Win32diskimager on my Windows 8.1 64bit computer. Boot up the Pi with the card inserted. I can get to the web interface and start the installation but as i said it hangs at "Creating disk Partion". Am I doing something wrong? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] OpenSUSE 13.1
CatBus wrote: > You may need to install sox. IIRC that's used for a lot of format > conversions. I do have Sox installed. I didn't have these problems when on OpenSuse 12.3. But am i the only one who's experiencing this? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=100402 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] OpenSUSE 13.1
jimbobvfr400 wrote: > Do you have Lame installed. The web LMS settings page should confirm > this. From memory settings - player - bitrate limiting > > Sent from my HUAWEI Y300-0100 using Tapatalk First, sorry for the double post. Yes, Lame is installed correctly, i can play mp3 files and also mp3 files that are converted on server level to different bitrate mp3. It's just the conversion from Flac to mp3 that gives problems. pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=100402 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] OpenSUSE 13.1
I'm very happy that LMS now works 'out of the box' with OpenSuse 13.1. Only one thing isn't working anymore. For my mobile phone as a mobile player i got the server to convert my FLAC's to mp3. This always worked well but now on Suse 13.1 it doesn't. I can play mp3 files and i can also let the server convert mp3 to another bitrate. Only conversion from flac to mp3 doesn't work. Maybe someone can help me with this? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=100402 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] OpenSUSE 13.1
I'm very happy that LMS now works 'out of the box' with OpenSuse 13.1. Only one thing isn't working anymore. For my mobile phone as a mobile player i got the server to convert my FLAC's to mp3. This always worked well but now on Suse 13.1 it doesn't. I can play mp3 files and i can also let the server convert mp3 to another bitrate. Only conversion from flac to mp3 doesn't work. Maybe someone can help me with this? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=100402 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
epoch1970 wrote: > You're probably missing execution rights. > sudo chmod +x squeezelite-i386 Thanks, that helped! pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
I want to try this out but I'm not shure how to start the program. i'm on Suse 12.2 (32-bit). I downloaded the file squeezelite-i386 to my homedir. from there I've tried ./squeezelite-i386 but that gives me: Permission denied. I also tried sudo ./squeezelite-i386 but then I get: Command not found. Can anybody help me with this? pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Won't start in OpenSUSE 11.3
For me the nightly builds still aren't working. Although I don't get an error during install, the server still won't start. I hope that Andy is still working on it. My workaround was to install the windows version in a virtual machine on my Suse 11.3 server. I don't like it but at least I have my music back. I tried to install it under Wine but that didn't work. -- pimd pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=80458 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] server doesn't start up in Suse 11.2
I always used Suse 11.1 with no problems. After upgrading to version 11.2 I encountered the problem of not being able to start Squeezebox Server. This problem is described somewhere else in these forums. I have not seen a full solution for this so far. When Squeezeboxserver was dead i restarted it by restarting my Suse 11.2 server. Not pretty but it worked. After upgrading to Squeezebox Server 7.5 the server completely doesn't start up anymore. Not at the boot my server nor by hand. This time my only workaround is to reinstall Squeezebox Server. Now that's not pretty, that's ugly... Is there a manual command to (re)start Squeezebox Server 7.5 on Suse 11.2? And is someone working on the Suse 11.2 problems? -- pimd pimd's Profile: http://forums.slimdevices.com/member.php?userid=19488 View this thread: http://forums.slimdevices.com/showthread.php?t=77944 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
