Re: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash

2019-02-21 Thread JJS via use-livecode
there was a bug once (8 series probably, can't remember) with the 
Message Box and then opening the Message Watcher crashing the IDE. I 
reported it myself. But i can't find it anymore at quality.


I believe it was solved then. Maybe there is a regression.

Op 21-2-2019 om 19:04 schreef J. Landman Gay via use-livecode:
If the message box is misdirecting commands, that may fit with some 
problems I've seen too. I couldn't set behavior on a button, menu key 
shortcuts fail all the time, and calling a handler from the message 
box periodically reports the handler can't be found even though the 
message box title field says the target stack is the one I'm looking 
at. Also, like you, Cmd-S periodically fails to do anything and 
contextual menus don't appear when right-clicking.


I open the message box at startup and never close it.

--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
On February 20, 2019 10:32:52 PM Ralph DiMola via use-livecode 
 wrote:


A new twist. A ctrl S will work normally until I open the message 
box. The

inspector will also open OK. Open up the message box and close it. Now a
ctrl S will cause the message box to open(last command is displayed 
but not
executed) then the stack will be saved normally. Also the inspector 
will no
longer open. Close the message box and do a Ctrl S and again the 
message box

opens up. Strange indeed.





___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your 
subscription preferences:

http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


RE: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash

2019-02-21 Thread J. Landman Gay via use-livecode
If the message box is misdirecting commands, that may fit with some 
problems I've seen too. I couldn't set behavior on a button, menu key 
shortcuts fail all the time, and calling a handler from the message box 
periodically reports the handler can't be found even though the message box 
title field says the target stack is the one I'm looking at. Also, like 
you, Cmd-S periodically fails to do anything and contextual menus don't 
appear when right-clicking.


I open the message box at startup and never close it.

--
Jacqueline Landman Gay | jac...@hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
On February 20, 2019 10:32:52 PM Ralph DiMola via use-livecode 
 wrote:



A new twist. A ctrl S will work normally until I open the message box. The
inspector will also open OK. Open up the message box and close it. Now a
ctrl S will cause the message box to open(last command is displayed but not
executed) then the stack will be saved normally. Also the inspector will no
longer open. Close the message box and do a Ctrl S and again the message box
opens up. Strange indeed.





___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


RE: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash

2019-02-20 Thread Ralph DiMola via use-livecode
I have not. It's a big stack with billions(well a 100 anyway) of support
files. I will open a report as soon as I can package it up.

A new twist. A ctrl S will work normally until I open the message box. The
inspector will also open OK. Open up the message box and close it. Now a
ctrl S will cause the message box to open(last command is displayed but not
executed) then the stack will be saved normally. Also the inspector will no
longer open. Close the message box and do a Ctrl S and again the message box
opens up. Strange indeed.

Ralph DiMola
IT Director
Evergreen Information Services
rdim...@evergreeninfo.net


-Original Message-
From: use-livecode [mailto:use-livecode-boun...@lists.runrev.com] On Behalf
Of Richard Gaskin via use-livecode
Sent: Wednesday, February 20, 2019 8:31 PM
To: use-livecode@lists.runrev.com
Cc: Richard Gaskin
Subject: Re: LC902 and LC901 message box error was LC902 and LC901 Hang with
Answer (was Crash

Excellent sleuthing, Ralph.

Has this valuable info made its way into a bug report?

-- 
  Richard Gaskin
  Fourth World Systems


Ralph DiMola wrote:
> Maybe this will help with some of the v9 problems. This is happening on my
> Win 10 VM.
> 
> I have a stack that makes the IDE go crazy if you open up the message box.
A
> slew of "can't find object" errors from a try/catch in my stack.
Yesterday
> it was OK the day before yesterday IDE went crazy. No major if any
changes.
> 
> I have some hints. After all settles down either of these 2 are left in
the
> message box.
> 1) send "ideInitialiseMessageBox" to stack "Message Box"
> 2) put the formattedHeight of field 1
> 
> The send(#1) has no result but when #2 is there it is actually executed
with
> the formattedheight of some field in the lower message box results area.
> 
> This is the executioncontexts of the try/catch in my code. Why I am
getting
> a resizestack message sent to my stack(last 2 lines) from the IDE when
> opening the message box is beyond me. If the IDE was always sending
> "resizestack"s to the developers stack then why is it a problem now?
Default
> stack behavior change? Behaviors getting lost/corrupted?
> 
> Default Stack==>stack "Message Box"
> Stack name==>stack "Message Box"
> Card name==> card "Single Line"
> 
> Executioncontexts:
> 
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",mouseUp,1027
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
>
9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",revMenubarMenuButt
> onClicked,1133
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
>
9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDETogglePalette,
> 8860
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
>
9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDEOpenPalette,46
> 22
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/message
> box/revmessagebox.8.rev",preOpenStack,566,stack "C:/Program Files
> (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript"
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/message
> box/revmessagebox.8.rev",generateFrame,370,stack "C:/Program Files
> (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript"
> stack "C:/Program Files (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/message
> box/revmessagebox.8.rev",layoutFrame,510,stack "C:/Program Files
> (x86)/RunRev/LiveCode Business
> 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript"
> stack "N:/Apps/Ver1/MyApp.livecode",resizestack,70
> stack "N:/Apps/Ver1/MyAppPlace.livecode",PlaceOnCards,920
> 
> The translated error...
> 
> Chunk: no such object
> occurred on line: 546
> 1
> 
> Chunk: can't find object
> 
> Ralph DiMola
> IT Director
> Evergreen Information Services
> rdimola at evergreeninfo.net
> 

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


Re: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash

2019-02-20 Thread Richard Gaskin via use-livecode

Excellent sleuthing, Ralph.

Has this valuable info made its way into a bug report?

--
 Richard Gaskin
 Fourth World Systems


Ralph DiMola wrote:

Maybe this will help with some of the v9 problems. This is happening on my
Win 10 VM.

I have a stack that makes the IDE go crazy if you open up the message box. A
slew of "can't find object" errors from a try/catch in my stack.  Yesterday
it was OK the day before yesterday IDE went crazy. No major if any changes.

I have some hints. After all settles down either of these 2 are left in the
message box.
1) send "ideInitialiseMessageBox" to stack "Message Box"
2) put the formattedHeight of field 1

The send(#1) has no result but when #2 is there it is actually executed with
the formattedheight of some field in the lower message box results area.

This is the executioncontexts of the try/catch in my code. Why I am getting
a resizestack message sent to my stack(last 2 lines) from the IDE when
opening the message box is beyond me. If the IDE was always sending
"resizestack"s to the developers stack then why is it a problem now? Default
stack behavior change? Behaviors getting lost/corrupted?

Default Stack==>stack "Message Box"
Stack name==>stack "Message Box"
Card name==> card "Single Line"

Executioncontexts:

stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",mouseUp,1027
stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",revMenubarMenuButt
onClicked,1133
stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDETogglePalette,
8860
stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDEOpenPalette,46
22
stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/message
box/revmessagebox.8.rev",preOpenStack,566,stack "C:/Program Files
(x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript"
stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/message
box/revmessagebox.8.rev",generateFrame,370,stack "C:/Program Files
(x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript"
stack "C:/Program Files (x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/message
box/revmessagebox.8.rev",layoutFrame,510,stack "C:/Program Files
(x86)/RunRev/LiveCode Business
9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript"
stack "N:/Apps/Ver1/MyApp.livecode",resizestack,70
stack "N:/Apps/Ver1/MyAppPlace.livecode",PlaceOnCards,920

The translated error...

Chunk: no such object
occurred on line: 546
1

Chunk: can't find object

Ralph DiMola
IT Director
Evergreen Information Services
rdimola at evergreeninfo.net



___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode