Re: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash
there was a bug once (8 series probably, can't remember) with the Message Box and then opening the Message Watcher crashing the IDE. I reported it myself. But i can't find it anymore at quality. I believe it was solved then. Maybe there is a regression. Op 21-2-2019 om 19:04 schreef J. Landman Gay via use-livecode: If the message box is misdirecting commands, that may fit with some problems I've seen too. I couldn't set behavior on a button, menu key shortcuts fail all the time, and calling a handler from the message box periodically reports the handler can't be found even though the message box title field says the target stack is the one I'm looking at. Also, like you, Cmd-S periodically fails to do anything and contextual menus don't appear when right-clicking. I open the message box at startup and never close it. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On February 20, 2019 10:32:52 PM Ralph DiMola via use-livecode wrote: A new twist. A ctrl S will work normally until I open the message box. The inspector will also open OK. Open up the message box and close it. Now a ctrl S will cause the message box to open(last command is displayed but not executed) then the stack will be saved normally. Also the inspector will no longer open. Close the message box and do a Ctrl S and again the message box opens up. Strange indeed. ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-livecode ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-livecode
RE: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash
If the message box is misdirecting commands, that may fit with some problems I've seen too. I couldn't set behavior on a button, menu key shortcuts fail all the time, and calling a handler from the message box periodically reports the handler can't be found even though the message box title field says the target stack is the one I'm looking at. Also, like you, Cmd-S periodically fails to do anything and contextual menus don't appear when right-clicking. I open the message box at startup and never close it. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On February 20, 2019 10:32:52 PM Ralph DiMola via use-livecode wrote: A new twist. A ctrl S will work normally until I open the message box. The inspector will also open OK. Open up the message box and close it. Now a ctrl S will cause the message box to open(last command is displayed but not executed) then the stack will be saved normally. Also the inspector will no longer open. Close the message box and do a Ctrl S and again the message box opens up. Strange indeed. ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-livecode
RE: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash
I have not. It's a big stack with billions(well a 100 anyway) of support files. I will open a report as soon as I can package it up. A new twist. A ctrl S will work normally until I open the message box. The inspector will also open OK. Open up the message box and close it. Now a ctrl S will cause the message box to open(last command is displayed but not executed) then the stack will be saved normally. Also the inspector will no longer open. Close the message box and do a Ctrl S and again the message box opens up. Strange indeed. Ralph DiMola IT Director Evergreen Information Services rdim...@evergreeninfo.net -Original Message- From: use-livecode [mailto:use-livecode-boun...@lists.runrev.com] On Behalf Of Richard Gaskin via use-livecode Sent: Wednesday, February 20, 2019 8:31 PM To: use-livecode@lists.runrev.com Cc: Richard Gaskin Subject: Re: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash Excellent sleuthing, Ralph. Has this valuable info made its way into a bug report? -- Richard Gaskin Fourth World Systems Ralph DiMola wrote: > Maybe this will help with some of the v9 problems. This is happening on my > Win 10 VM. > > I have a stack that makes the IDE go crazy if you open up the message box. A > slew of "can't find object" errors from a try/catch in my stack. Yesterday > it was OK the day before yesterday IDE went crazy. No major if any changes. > > I have some hints. After all settles down either of these 2 are left in the > message box. > 1) send "ideInitialiseMessageBox" to stack "Message Box" > 2) put the formattedHeight of field 1 > > The send(#1) has no result but when #2 is there it is actually executed with > the formattedheight of some field in the lower message box results area. > > This is the executioncontexts of the try/catch in my code. Why I am getting > a resizestack message sent to my stack(last 2 lines) from the IDE when > opening the message box is beyond me. If the IDE was always sending > "resizestack"s to the developers stack then why is it a problem now? Default > stack behavior change? Behaviors getting lost/corrupted? > > Default Stack==>stack "Message Box" > Stack name==>stack "Message Box" > Card name==> card "Single Line" > > Executioncontexts: > > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",mouseUp,1027 > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",revMenubarMenuButt > onClicked,1133 > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDETogglePalette, > 8860 > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDEOpenPalette,46 > 22 > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/message > box/revmessagebox.8.rev",preOpenStack,566,stack "C:/Program Files > (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript" > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/message > box/revmessagebox.8.rev",generateFrame,370,stack "C:/Program Files > (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript" > stack "C:/Program Files (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/message > box/revmessagebox.8.rev",layoutFrame,510,stack "C:/Program Files > (x86)/RunRev/LiveCode Business > 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript" > stack "N:/Apps/Ver1/MyApp.livecode",resizestack,70 > stack "N:/Apps/Ver1/MyAppPlace.livecode",PlaceOnCards,920 > > The translated error... > > Chunk: no such object > occurred on line: 546 > 1 > > Chunk: can't find object > > Ralph DiMola > IT Director > Evergreen Information Services > rdimola at evergreeninfo.net > ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-livecode ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-livecode
Re: LC902 and LC901 message box error was LC902 and LC901 Hang with Answer (was Crash
Excellent sleuthing, Ralph. Has this valuable info made its way into a bug report? -- Richard Gaskin Fourth World Systems Ralph DiMola wrote: Maybe this will help with some of the v9 problems. This is happening on my Win 10 VM. I have a stack that makes the IDE go crazy if you open up the message box. A slew of "can't find object" errors from a try/catch in my stack. Yesterday it was OK the day before yesterday IDE went crazy. No major if any changes. I have some hints. After all settles down either of these 2 are left in the message box. 1) send "ideInitialiseMessageBox" to stack "Message Box" 2) put the formattedHeight of field 1 The send(#1) has no result but when #2 is there it is actually executed with the formattedheight of some field in the lower message box results area. This is the executioncontexts of the try/catch in my code. Why I am getting a resizestack message sent to my stack(last 2 lines) from the IDE when opening the message box is beyond me. If the IDE was always sending "resizestack"s to the developers stack then why is it a problem now? Default stack behavior change? Behaviors getting lost/corrupted? Default Stack==>stack "Message Box" Stack name==>stack "Message Box" Card name==> card "Single Line" Executioncontexts: stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",mouseUp,1027 stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/menubar/revmenubar.livecodescript",revMenubarMenuButt onClicked,1133 stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDETogglePalette, 8860 stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/libraries/revidelibrary.8.livecodescript",revIDEOpenPalette,46 22 stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/message box/revmessagebox.8.rev",preOpenStack,566,stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript" stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/message box/revmessagebox.8.rev",generateFrame,370,stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript" stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/message box/revmessagebox.8.rev",layoutFrame,510,stack "C:/Program Files (x86)/RunRev/LiveCode Business 9.0.2/Toolset/palettes/behaviors/revpalettebehavior.livecodescript" stack "N:/Apps/Ver1/MyApp.livecode",resizestack,70 stack "N:/Apps/Ver1/MyAppPlace.livecode",PlaceOnCards,920 The translated error... Chunk: no such object occurred on line: 546 1 Chunk: can't find object Ralph DiMola IT Director Evergreen Information Services rdimola at evergreeninfo.net ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev.com/mailman/listinfo/use-livecode
