Re: Re: Re: How to set num tokens on live node
Omnester, Thanks a ton, will try to execute the same. I will look into that thread. Thanks and Regards, Goutham Reddy Aenugu. On Fri, Nov 2, 2018 at 1:36 AM onmstester onmstester wrote: > I think that is not possible. > If currently both DC's are in use, you should remove one of them (gently, > by changing replication config), then change num_tokens in removed dc, add > it again with changing replication config, and finally do the same for the > other dc. > > P.S A while ago, there was a thread in this forum, discussing that > num_tokens 256 is not a good default in Cassandra and should use a smaller > number like 4,8 or 16, i recommend you to read it through, maybe the whole > migration (from 8 to 256) became unnecessary > > Sent using Zoho Mail <https://www.zoho.com/mail/> > > > Forwarded message > From : Goutham reddy > To : > Date : Fri, 02 Nov 2018 11:52:53 +0330 > Subject : Re: Re: How to set num tokens on live node > Forwarded message > > Onmstester, > Thanks for the reply, but for both the DC’s I need to change my num_token > value from 8 to 256. So that is the challenge I am facing. Any comments. > > Thanks and Regards, > Goutham > > On Fri, Nov 2, 2018 at 1:08 AM onmstester onmstester < > onmstes...@zoho.com.invalid> wrote: > > -- > Regards > Goutham Reddy > > > IMHO, the best option with two datacenters is to config replication > strategy to stream data from dc with wrong num_token to correct one, and > then a repair on each node would move your data to the other dc > > Sent using Zoho Mail <https://www.zoho.com/mail/> > > > ==== Forwarded message > From : Goutham reddy > To : > Date : Fri, 02 Nov 2018 10:46:10 +0330 > Subject : Re: How to set num tokens on live node > Forwarded message > > Elliott, > Thanks Elliott, how about if we have two Datacenters, any comments? > > Thanks and Regards, > Goutham. > > On Thu, Nov 1, 2018 at 5:40 PM Elliott Sims wrote: > > -- > Regards > Goutham Reddy > > As far as I know, it's not possible to change it live. You have to create > a new "datacenter" with new hosts using the new num_tokens value, then > switch everything to use the new DC and tear down the old. > > On Thu, Nov 1, 2018 at 6:16 PM Goutham reddy > wrote: > > Hi team, > Can someone help me out I don’t find anywhere how to change the numtokens > on a running nodes. Any help is appreciated > > Thanks and Regards, > Goutham. > > > -- > Regards > Goutham Reddy > > > > > -- Regards Goutham Reddy
Fwd: Re: Re: How to set num tokens on live node
I think that is not possible. If currently both DC's are in use, you should remove one of them (gently, by changing replication config), then change num_tokens in removed dc, add it again with changing replication config, and finally do the same for the other dc. P.S A while ago, there was a thread in this forum, discussing that num_tokens 256 is not a good default in Cassandra and should use a smaller number like 4,8 or 16, i recommend you to read it through, maybe the whole migration (from 8 to 256) became unnecessary Sent using Zoho Mail Forwarded message From : Goutham reddy To : Date : Fri, 02 Nov 2018 11:52:53 +0330 Subject : Re: Re: How to set num tokens on live node Forwarded message Onmstester, Thanks for the reply, but for both the DC’s I need to change my num_token value from 8 to 256. So that is the challenge I am facing. Any comments. Thanks and Regards, Goutham On Fri, Nov 2, 2018 at 1:08 AM onmstester onmstester wrote: -- Regards Goutham Reddy IMHO, the best option with two datacenters is to config replication strategy to stream data from dc with wrong num_token to correct one, and then a repair on each node would move your data to the other dc Sent using Zoho Mail Forwarded message From : Goutham reddy To : Date : Fri, 02 Nov 2018 10:46:10 +0330 Subject : Re: How to set num tokens on live node Forwarded message Elliott, Thanks Elliott, how about if we have two Datacenters, any comments? Thanks and Regards, Goutham. On Thu, Nov 1, 2018 at 5:40 PM Elliott Sims wrote: -- Regards Goutham Reddy As far as I know, it's not possible to change it live. You have to create a new "datacenter" with new hosts using the new num_tokens value, then switch everything to use the new DC and tear down the old. On Thu, Nov 1, 2018 at 6:16 PM Goutham reddy wrote: Hi team, Can someone help me out I don’t find anywhere how to change the numtokens on a running nodes. Any help is appreciated Thanks and Regards, Goutham. -- Regards Goutham Reddy
Re: Re: How to set num tokens on live node
Onmstester, Thanks for the reply, but for both the DC’s I need to change my num_token value from 8 to 256. So that is the challenge I am facing. Any comments. Thanks and Regards, Goutham On Fri, Nov 2, 2018 at 1:08 AM onmstester onmstester wrote: > IMHO, the best option with two datacenters is to config replication > strategy to stream data from dc with wrong num_token to correct one, and > then a repair on each node would move your data to the other dc > > Sent using Zoho Mail <https://www.zoho.com/mail/> > > > Forwarded message > From : Goutham reddy > To : > Date : Fri, 02 Nov 2018 10:46:10 +0330 > Subject : Re: How to set num tokens on live node > Forwarded message > > Elliott, > Thanks Elliott, how about if we have two Datacenters, any comments? > > Thanks and Regards, > Goutham. > > On Thu, Nov 1, 2018 at 5:40 PM Elliott Sims wrote: > > -- > Regards > Goutham Reddy > > As far as I know, it's not possible to change it live. You have to create > a new "datacenter" with new hosts using the new num_tokens value, then > switch everything to use the new DC and tear down the old. > > On Thu, Nov 1, 2018 at 6:16 PM Goutham reddy > wrote: > > Hi team, > Can someone help me out I don’t find anywhere how to change the numtokens > on a running nodes. Any help is appreciated > > Thanks and Regards, > Goutham. > > > -- > Regards > Goutham Reddy > > > > -- Regards Goutham Reddy
Fwd: Re: How to set num tokens on live node
IMHO, the best option with two datacenters is to config replication strategy to stream data from dc with wrong num_token to correct one, and then a repair on each node would move your data to the other dc Sent using Zoho Mail Forwarded message From : Goutham reddy To : Date : Fri, 02 Nov 2018 10:46:10 +0330 Subject : Re: How to set num tokens on live node Forwarded message Elliott, Thanks Elliott, how about if we have two Datacenters, any comments? Thanks and Regards, Goutham. On Thu, Nov 1, 2018 at 5:40 PM Elliott Sims wrote: -- Regards Goutham Reddy As far as I know, it's not possible to change it live. You have to create a new "datacenter" with new hosts using the new num_tokens value, then switch everything to use the new DC and tear down the old. On Thu, Nov 1, 2018 at 6:16 PM Goutham reddy wrote: Hi team, Can someone help me out I don’t find anywhere how to change the numtokens on a running nodes. Any help is appreciated Thanks and Regards, Goutham. -- Regards Goutham Reddy
Re: How to set num tokens on live node
Elliott, Thanks Elliott, how about if we have two Datacenters, any comments? Thanks and Regards, Goutham. On Thu, Nov 1, 2018 at 5:40 PM Elliott Sims wrote: > As far as I know, it's not possible to change it live. You have to create > a new "datacenter" with new hosts using the new num_tokens value, then > switch everything to use the new DC and tear down the old. > > On Thu, Nov 1, 2018 at 6:16 PM Goutham reddy > wrote: > >> Hi team, >> Can someone help me out I don’t find anywhere how to change the numtokens >> on a running nodes. Any help is appreciated >> >> Thanks and Regards, >> Goutham. >> -- >> Regards >> Goutham Reddy >> > -- Regards Goutham Reddy
Re: How to set num tokens on live node
As far as I know, it's not possible to change it live. You have to create a new "datacenter" with new hosts using the new num_tokens value, then switch everything to use the new DC and tear down the old. On Thu, Nov 1, 2018 at 6:16 PM Goutham reddy wrote: > Hi team, > Can someone help me out I don’t find anywhere how to change the numtokens > on a running nodes. Any help is appreciated > > Thanks and Regards, > Goutham. > -- > Regards > Goutham Reddy >
How to set num tokens on live node
Hi team, Can someone help me out I don’t find anywhere how to change the numtokens on a running nodes. Any help is appreciated Thanks and Regards, Goutham. -- Regards Goutham Reddy