Re: talk list table
I assume you would select HBase 0.94.6.1 (the latest release) for this project. For #1, write performance would be lower if you choose to use Append (vs. using Put). bq. Can appends be batched by the client or do they execute immediately? This depends on your use case. Take a look at the following method in HTable where you can send a list of actions (Appends): public void batch(final List actions, final Object[] results) For #2 bq. The other would be to prefix the timestamp row key with a random leading byte. This technique has been used elsewhere and is better than the first one. Cheers On Mon, Apr 15, 2013 at 6:09 AM, Kireet Reddy wrote: > I are planning to create a "scheduled task list" table in our hbase > cluster. Essentially we will define a table with key timestamp and then the > row contents will be all the tasks that need to be processed within that > second (or whatever time period). I am trying to do the "reasonably wide > rows" design mentioned in the hbasecon opentsdb talk. A couple of questions: > > 1. Should we use append or put to create tasks? Since these rows will not > live forever, storage space in not a concern, read/write performance is > more important. As concurrency increases I would guess the row lock may > become an issue in append? Can appends be batched by the client or do they > execute immediately? > > 2. I am a little worried about hotspots. This basic design may cause > issues in terms of the table's performance. Many tasks will execute and > reschedule themselves using the same interval, t + 1 hour for example. So > many the writes may all go to the same block. Also, we have a lot of other > data so I am worried it may impact performance of unrelated data if the > region server gets too busy servicing the task list table. I can think of 2 > strategies to avoid this. One would be to create N different tables and > read/write tasks to them randomly. This may spread load across servers, but > there is no guarantee hbase will place the tables on different region > servers, correct? The other would be to prefix the timestamp row key with a > random leading byte. Then when reading from the task list table, consumers > could scan from any/all possible values of the random byte + current > timestamp to obtain tasks. Both strategies seem like they could spread out > load, but at the cost of more work/complexity to read tasks from the table. > Do either of those approaches make sense? > > On the read side, it seems like a similar problem exists in that all > consumers will be reading rows based on the current timestamp. Is this good > because the block will very likely be cached or bad because the region > server may become overloaded? I have a feeling the answer is going to be > "it depends". :) > > I did see the previous posts on queues and the tips there - use zookeeper > for coordination, schedule major compactions, etc. Sorry if these questions > are basic, I am pretty new to hbase. Thanks!
Re: talk list table
Thanks for the reply. "write performance would be lower" -> this means better? Also I think I used the wrong terminology regarding batching. I meant to ask if it uses the client side write buffer. I would think not since the append() method returns a Result. I could batch them up application side I suppose. Append also seems to return the updated value. This seems like a lot of unnecessary I/O in my case since I am not immediately interested in the updated value. I guess there is no way to turn that off? On 4/15/13 1:28 PM, Ted Yu wrote: I assume you would select HBase 0.94.6.1 (the latest release) for this project. For #1, write performance would be lower if you choose to use Append (vs. using Put). bq. Can appends be batched by the client or do they execute immediately? This depends on your use case. Take a look at the following method in HTable where you can send a list of actions (Appends): public void batch(final List actions, final Object[] results) For #2 bq. The other would be to prefix the timestamp row key with a random leading byte. This technique has been used elsewhere and is better than the first one. Cheers On Mon, Apr 15, 2013 at 6:09 AM, Kireet Reddy wrote: I are planning to create a "scheduled task list" table in our hbase cluster. Essentially we will define a table with key timestamp and then the row contents will be all the tasks that need to be processed within that second (or whatever time period). I am trying to do the "reasonably wide rows" design mentioned in the hbasecon opentsdb talk. A couple of questions: 1. Should we use append or put to create tasks? Since these rows will not live forever, storage space in not a concern, read/write performance is more important. As concurrency increases I would guess the row lock may become an issue in append? Can appends be batched by the client or do they execute immediately? 2. I am a little worried about hotspots. This basic design may cause issues in terms of the table's performance. Many tasks will execute and reschedule themselves using the same interval, t + 1 hour for example. So many the writes may all go to the same block. Also, we have a lot of other data so I am worried it may impact performance of unrelated data if the region server gets too busy servicing the task list table. I can think of 2 strategies to avoid this. One would be to create N different tables and read/write tasks to them randomly. This may spread load across servers, but there is no guarantee hbase will place the tables on different region servers, correct? The other would be to prefix the timestamp row key with a random leading byte. Then when reading from the task list table, consumers could scan from any/all possible values of the random byte + current timestamp to obtain tasks. Both strategies seem like they could spread out load, but at the cost of more work/complexity to read tasks from the table. Do either of those approaches make sense? On the read side, it seems like a similar problem exists in that all consumers will be reading rows based on the current timestamp. Is this good because the block will very likely be cached or bad because the region server may become overloaded? I have a feeling the answer is going to be "it depends". :) I did see the previous posts on queues and the tips there - use zookeeper for coordination, schedule major compactions, etc. Sorry if these questions are basic, I am pretty new to hbase. Thanks!
Re: talk list table
bq. write performance would be lower The above means poorer performance. bq. I could batch them up application side Please do that. bq. I guess there is no way to turn that off? That's right. On Mon, Apr 15, 2013 at 11:15 AM, Kireet wrote: > > > > Thanks for the reply. "write performance would be lower" -> this means > better? > > Also I think I used the wrong terminology regarding batching. I meant to > ask if it uses the client side write buffer. I would think not since the > append() method returns a Result. I could batch them up application side I > suppose. Append also seems to return the updated value. This seems like a > lot of unnecessary I/O in my case since I am not immediately interested in > the updated value. I guess there is no way to turn that off? > > > On 4/15/13 1:28 PM, Ted Yu wrote: > >> I assume you would select HBase 0.94.6.1 (the latest release) for this >> project. >> >> For #1, write performance would be lower if you choose to use Append (vs. >> using Put). >> >> bq. Can appends be batched by the client or do they execute immediately? >> This depends on your use case. Take a look at the following method in >> HTable where you can send a list of actions (Appends): >> >>public void batch(final List actions, final Object[] >> results) >> For #2 >> bq. The other would be to prefix the timestamp row key with a random >> leading byte. >> >> This technique has been used elsewhere and is better than the first one. >> >> Cheers >> >> On Mon, Apr 15, 2013 at 6:09 AM, Kireet Reddy > *a...@public.gmane.org > >> wrote: >> >> I are planning to create a "scheduled task list" table in our hbase >>> cluster. Essentially we will define a table with key timestamp and then >>> the >>> row contents will be all the tasks that need to be processed within that >>> second (or whatever time period). I am trying to do the "reasonably wide >>> rows" design mentioned in the hbasecon opentsdb talk. A couple of >>> questions: >>> >>> 1. Should we use append or put to create tasks? Since these rows will not >>> live forever, storage space in not a concern, read/write performance is >>> more important. As concurrency increases I would guess the row lock may >>> become an issue in append? Can appends be batched by the client or do >>> they >>> execute immediately? >>> >>> 2. I am a little worried about hotspots. This basic design may cause >>> issues in terms of the table's performance. Many tasks will execute and >>> reschedule themselves using the same interval, t + 1 hour for example. So >>> many the writes may all go to the same block. Also, we have a lot of >>> other >>> data so I am worried it may impact performance of unrelated data if the >>> region server gets too busy servicing the task list table. I can think >>> of 2 >>> strategies to avoid this. One would be to create N different tables and >>> read/write tasks to them randomly. This may spread load across servers, >>> but >>> there is no guarantee hbase will place the tables on different region >>> servers, correct? The other would be to prefix the timestamp row key >>> with a >>> random leading byte. Then when reading from the task list table, >>> consumers >>> could scan from any/all possible values of the random byte + current >>> timestamp to obtain tasks. Both strategies seem like they could spread >>> out >>> load, but at the cost of more work/complexity to read tasks from the >>> table. >>> Do either of those approaches make sense? >>> >>> On the read side, it seems like a similar problem exists in that all >>> consumers will be reading rows based on the current timestamp. Is this >>> good >>> because the block will very likely be cached or bad because the region >>> server may become overloaded? I have a feeling the answer is going to be >>> "it depends". :) >>> >>> I did see the previous posts on queues and the tips there - use zookeeper >>> for coordination, schedule major compactions, etc. Sorry if these >>> questions >>> are basic, I am pretty new to hbase. Thanks! >>> >> >> > >
Re: talk list table
Hope I'm not too late here... regarding hot spotting with sequential keys, I'd suggest you read this Sematext blog - http://blog.sematext.com/2012/04/09/hbasewd-avoid-regionserver-hotspotting-despite-writing-records-with-sequential-keys/ They present a nice idea there for this kind of issues. Good Luck! On Mon, Apr 15, 2013 at 11:18 PM, Ted Yu wrote: > bq. write performance would be lower > > The above means poorer performance. > > bq. I could batch them up application side > > Please do that. > > bq. I guess there is no way to turn that off? > > That's right. > > On Mon, Apr 15, 2013 at 11:15 AM, Kireet wrote: > > > > > > > > > Thanks for the reply. "write performance would be lower" -> this means > > better? > > > > Also I think I used the wrong terminology regarding batching. I meant to > > ask if it uses the client side write buffer. I would think not since the > > append() method returns a Result. I could batch them up application side > I > > suppose. Append also seems to return the updated value. This seems like a > > lot of unnecessary I/O in my case since I am not immediately interested > in > > the updated value. I guess there is no way to turn that off? > > > > > > On 4/15/13 1:28 PM, Ted Yu wrote: > > > >> I assume you would select HBase 0.94.6.1 (the latest release) for this > >> project. > >> > >> For #1, write performance would be lower if you choose to use Append > (vs. > >> using Put). > >> > >> bq. Can appends be batched by the client or do they execute immediately? > >> This depends on your use case. Take a look at the following method in > >> HTable where you can send a list of actions (Appends): > >> > >>public void batch(final List actions, final Object[] > >> results) > >> For #2 > >> bq. The other would be to prefix the timestamp row key with a random > >> leading byte. > >> > >> This technique has been used elsewhere and is better than the first one. > >> > >> Cheers > >> > >> On Mon, Apr 15, 2013 at 6:09 AM, Kireet Reddy > >> *a...@public.gmane.org < > kireet-teh5dpvpl8nqt0dzr%2ba...@public.gmane.org>> > >> wrote: > >> > >> I are planning to create a "scheduled task list" table in our hbase > >>> cluster. Essentially we will define a table with key timestamp and then > >>> the > >>> row contents will be all the tasks that need to be processed within > that > >>> second (or whatever time period). I am trying to do the "reasonably > wide > >>> rows" design mentioned in the hbasecon opentsdb talk. A couple of > >>> questions: > >>> > >>> 1. Should we use append or put to create tasks? Since these rows will > not > >>> live forever, storage space in not a concern, read/write performance is > >>> more important. As concurrency increases I would guess the row lock may > >>> become an issue in append? Can appends be batched by the client or do > >>> they > >>> execute immediately? > >>> > >>> 2. I am a little worried about hotspots. This basic design may cause > >>> issues in terms of the table's performance. Many tasks will execute and > >>> reschedule themselves using the same interval, t + 1 hour for example. > So > >>> many the writes may all go to the same block. Also, we have a lot of > >>> other > >>> data so I am worried it may impact performance of unrelated data if the > >>> region server gets too busy servicing the task list table. I can think > >>> of 2 > >>> strategies to avoid this. One would be to create N different tables and > >>> read/write tasks to them randomly. This may spread load across servers, > >>> but > >>> there is no guarantee hbase will place the tables on different region > >>> servers, correct? The other would be to prefix the timestamp row key > >>> with a > >>> random leading byte. Then when reading from the task list table, > >>> consumers > >>> could scan from any/all possible values of the random byte + current > >>> timestamp to obtain tasks. Both strategies seem like they could spread > >>> out > >>> load, but at the cost of more work/complexity to read tasks from the > >>> table. > >>> Do either of those approaches make sense? > >>> > >>> On the read side, it seems like a similar problem exists in that all > >>> consumers will be reading rows based on the current timestamp. Is this > >>> good > >>> because the block will very likely be cached or bad because the region > >>> server may become overloaded? I have a feeling the answer is going to > be > >>> "it depends". :) > >>> > >>> I did see the previous posts on queues and the tips there - use > zookeeper > >>> for coordination, schedule major compactions, etc. Sorry if these > >>> questions > >>> are basic, I am pretty new to hbase. Thanks! > >>> > >> > >> > > > > >
Re: talk list table
+ http://blog.sematext.com/2012/12/24/hbasewd-and-hbasehut-handy-hbase-libraries-available-in-public-maven-repo/ if you use Maven and want to use HBaseWD. Otis -- HBASE Performance Monitoring - http://sematext.com/spm/index.html On Sat, Apr 20, 2013 at 11:24 AM, Amit Sela wrote: > Hope I'm not too late here... regarding hot spotting with sequential keys, > I'd suggest you read this Sematext blog - > http://blog.sematext.com/2012/04/09/hbasewd-avoid-regionserver-hotspotting-despite-writing-records-with-sequential-keys/ > They present a nice idea there for this kind of issues. > > Good Luck! > > > > On Mon, Apr 15, 2013 at 11:18 PM, Ted Yu wrote: > >> bq. write performance would be lower >> >> The above means poorer performance. >> >> bq. I could batch them up application side >> >> Please do that. >> >> bq. I guess there is no way to turn that off? >> >> That's right. >> >> On Mon, Apr 15, 2013 at 11:15 AM, Kireet wrote: >> >> > >> > >> > >> > Thanks for the reply. "write performance would be lower" -> this means >> > better? >> > >> > Also I think I used the wrong terminology regarding batching. I meant to >> > ask if it uses the client side write buffer. I would think not since the >> > append() method returns a Result. I could batch them up application side >> I >> > suppose. Append also seems to return the updated value. This seems like a >> > lot of unnecessary I/O in my case since I am not immediately interested >> in >> > the updated value. I guess there is no way to turn that off? >> > >> > >> > On 4/15/13 1:28 PM, Ted Yu wrote: >> > >> >> I assume you would select HBase 0.94.6.1 (the latest release) for this >> >> project. >> >> >> >> For #1, write performance would be lower if you choose to use Append >> (vs. >> >> using Put). >> >> >> >> bq. Can appends be batched by the client or do they execute immediately? >> >> This depends on your use case. Take a look at the following method in >> >> HTable where you can send a list of actions (Appends): >> >> >> >>public void batch(final List actions, final Object[] >> >> results) >> >> For #2 >> >> bq. The other would be to prefix the timestamp row key with a random >> >> leading byte. >> >> >> >> This technique has been used elsewhere and is better than the first one. >> >> >> >> Cheers >> >> >> >> On Mon, Apr 15, 2013 at 6:09 AM, Kireet Reddy >> > >> *a...@public.gmane.org < >> kireet-teh5dpvpl8nqt0dzr%2ba...@public.gmane.org>> >> >> wrote: >> >> >> >> I are planning to create a "scheduled task list" table in our hbase >> >>> cluster. Essentially we will define a table with key timestamp and then >> >>> the >> >>> row contents will be all the tasks that need to be processed within >> that >> >>> second (or whatever time period). I am trying to do the "reasonably >> wide >> >>> rows" design mentioned in the hbasecon opentsdb talk. A couple of >> >>> questions: >> >>> >> >>> 1. Should we use append or put to create tasks? Since these rows will >> not >> >>> live forever, storage space in not a concern, read/write performance is >> >>> more important. As concurrency increases I would guess the row lock may >> >>> become an issue in append? Can appends be batched by the client or do >> >>> they >> >>> execute immediately? >> >>> >> >>> 2. I am a little worried about hotspots. This basic design may cause >> >>> issues in terms of the table's performance. Many tasks will execute and >> >>> reschedule themselves using the same interval, t + 1 hour for example. >> So >> >>> many the writes may all go to the same block. Also, we have a lot of >> >>> other >> >>> data so I am worried it may impact performance of unrelated data if the >> >>> region server gets too busy servicing the task list table. I can think >> >>> of 2 >> >>> strategies to avoid this. One would be to create N different tables and >> >>> read/write tasks to them randomly. This may spread load across servers, >> >>> but >> >>> there is no guarantee hbase will place the tables on different region >> >>> servers, correct? The other would be to prefix the timestamp row key >> >>> with a >> >>> random leading byte. Then when reading from the task list table, >> >>> consumers >> >>> could scan from any/all possible values of the random byte + current >> >>> timestamp to obtain tasks. Both strategies seem like they could spread >> >>> out >> >>> load, but at the cost of more work/complexity to read tasks from the >> >>> table. >> >>> Do either of those approaches make sense? >> >>> >> >>> On the read side, it seems like a similar problem exists in that all >> >>> consumers will be reading rows based on the current timestamp. Is this >> >>> good >> >>> because the block will very likely be cached or bad because the region >> >>> server may become overloaded? I have a feeling the answer is going to >> be >> >>> "it depends". :) >> >>> >> >>> I did see the previous posts on queues and the tips there - use >> zookeeper >> >>> for coordination, schedule major compactions, etc. Sorry if these