Re: Conference Room creation update error
Hello Aaron, Just have tested with UI restore from backup Profile picture import works as expected On Tue, Aug 7, 2018 at 1:06 PM Maxim Solodovnik wrote: > > No need to file JIRA :) > The issue was caused by fix for [OPENMEETINGS-1908] > Should be fixed in a new build > On Tue, Aug 7, 2018 at 12:22 PM Maxim Solodovnik wrote: > > > > Thanks for the report! > > Can you please check if this bug is reproducible on 4.0.4? > > (https://om.alteametasoft.com/openmeetings/) > > and file JIRA? > > On Tue, Aug 7, 2018 at 4:49 AM wrote: > > > > > > Ok looks like the error can be reproduced with the demo as well. > > > > > > When the room is 1st entered on a fresh reboot the white board is present > > > and you can upload a file to that. > > > > > > But if you close the original WB and then open a new WB you cannot upload > > > a file to the WB. It remains blank. > > > > > > I have attached the debug log but it does not tell much (to myself that > > > is) > > > > > > -Original Message- > > > From: Maxim Solodovnik > > > Sent: Monday, August 6, 2018 12:22 PM > > > To: Openmeetings user-list > > > Subject: Re: Conference Room creation update error > > > > > > Demo-next is updated to latest revision > > > On Mon, Aug 6, 2018 at 10:10 PM wrote: > > > > > > > > Ok. If they are skipped on import then no need to delete the dB > > > > object. I just noticed when the backup was ran they were still listed, > > > > was the only reason for the delete. > > > > > > > > If you/someone has the latest snapshot running (revision 3f2c95f) can > > > > they test something for me. I am currently running live with the > > > > startup script so I cannot get the debug information until after the > > > > day is over. But looks like I cannot upload a file to the WB. May be > > > > localized, but was wondering if one had the revision up and going if > > > > they could test. This is the same VM that has been ran previous > > > > version so all needed pacakges should already be installed. > > > > > > > > Demo looks like its still running some revisions back so couldn't test > > > > there. > > > > > > > > -Original Message- > > > > From: Maxim Solodovnik > > > > Sent: Monday, August 6, 2018 11:01 AM > > > > To: Openmeetings user-list > > > > Subject: Re: Conference Room creation update error > > > > > > > > Actually both command line and UI installers uses same java code I'll > > > > retest with UI installer ASAP > > > > > > > > According to your question: deleted/purged users are included into XML > > > > backup files, but are being skipped during import > > > > > > > > I would not recommend to run queries like 'delete from om_user where > > > > id = #' since data integrity will be broken Here is the brief list of > > > > what need to done for user "hard" delete > > > > https://issues.apache.org/jira/browse/OPENMEETINGS-1864 (hard delete > > > > section) > > > > On Sun, Aug 5, 2018 at 5:14 PM Aaron H wrote: > > > > > > > > > > Took a back-up of running system *one thing to note that prior to > > > > > back-up being preformed there was users that were purged, but also > > > > > deleted from the dB via manual process (delete from om_user where id > > > > > = #) Wasn't for sure if the back-up would pick up these "purged" > > > > > users reason for the manual deletion. Everything was restarted > > > > > before back-up was performed. > > > > > > > > > > Then followed the normal steps for a build > > > > > > > > > > Move current install to old > > > > > * mv /opt/current /opt/old > > > > > Delete existing dB and create new > > > > > wGET new package and unzip in /opt/current folder Run new install > > > > > script *script copies customization files from stored location into > > > > > new install (can supply list of files that are copied if needed) > > > > > Restart server Run sh red5.sh to start process Go through the setup > > > > > process and restart server once complete > > > > > * during setup the tick for install default objects is not selected > > > > > Log in as admin and preformed import > > > > > > > > > > After the import was ran it put everything into the folder > > > > > /webapps/Openmeetings/upload/import/import_2018_08_04_05_59_04/roomF > > > > > il > > > > > es/profiles > > > > > > > > > > I had never did a command line import as I have always done it after > > > > > the system was configured. Since your import was successful then I > > > > > would assume there is something wrong with the back-up that was taken > > > > > and not a bug. > > > > > > > > > > One question to see if the step still needs to be taken. When you > > > > > delete a user and it creates the "purged" information; when you take > > > > > a back-up are those entries also included or does it omit them? > > > > > Since I still seen the entries in the dB I figured that the back-up > > > > > would include this data. That is the reason for the manual deletion > > > > > prior to taking the backup. > > > > > > >
Re: Saved whiteboard won't load back into whiteboard (using Macbook Air)
Okay, you think this is the issue that Mac users are having? I'll ask one of the folks with a Mac to test it. Thanks! Dan On Wed, Aug 8, 2018 at 1:39 AM, Maxim Solodovnik wrote: > Hello Daniel, > > #2 was just addressed, could you please test if everything works for you > as expected on demo-next https://om.alteametasoft.com:8443/next ? > In case everything is OK I can start merge your current version with 4.0.5 > > On Wed, Aug 8, 2018 at 7:42 AM Maxim Solodovnik > wrote: > >> Hello Daniel, >> >> I see 2 possibilities here >> 1) https://markmail.org/message/x7szj63in4m3xzsb >> 2) https://markmail.org/message/ee5u4p7zom5fow5v >> >> 1) is fixed, but not merged to your version, 2) need to be addressed >> Will try to do it this week >> Please ping me if I'll be too silent >> >> On Wed, Aug 8, 2018 at 3:07 AM Daniel Ascher < >> aplusad...@aplustutoring.com> wrote: >> >>> A similar error was just reported by another tutor, also using a Mac. In >>> this case she can't load files from the group files directory into any of >>> the whiteboards. She is getting the same error as the other tutor. From my >>> tutor: *"I know we're supposed to be able to drag and drop them from >>> the Group Files menu, but when I grab the file and drag it, it shows a >>> little plus and then it says javascript; - something like that. It won't >>> actually load though."* >>> >>> I asked her if she can provide a screenshot. I'll let you know. Anyone >>> else have a Mac they can test this with? >>> >>> Thanks. Dan >>> >>> On Thu, Jul 26, 2018 at 10:46 PM, Maxim Solodovnik >> > wrote: >>> Great, thanks! On Thu, Jul 26, 2018 at 8:39 PM Daniel Ascher < aplusad...@aplustutoring.com> wrote: > I have asked my tutor whose computer had this issue if she can try to > do it again. Then I can direct you to the room so you can examine the file > created. I'll keep you posted. Thanks. Dan > > On Tue, Jul 24, 2018 at 9:19 AM, Maxim Solodovnik < > solomax...@gmail.com> wrote: > >> It is sad :( >> I need something to investigate >> >> On Tue, Jul 24, 2018 at 8:16 PM Daniel Ascher < >> aplusad...@aplustutoring.com> wrote: >> >>> I actually tried that but it didn't work from my PC (the file didn't >>> load back into the whiteboard). Unfortunately the file no longer exists >>> since I deleted it. :( >>> >>> On Tue, Jul 24, 2018 at 9:10 AM, Maxim Solodovnik < >>> solomax...@gmail.com> wrote: >>> Hello Daniel, Maybe you have access to this saved WB? Can you check if this exact file can be uploaded using your machine? If not the problem might be OS independent ... On Tue, Jul 24, 2018 at 7:53 PM Daniel Ascher < aplusad...@aplustutoring.com> wrote: > Yes, the issue was with this person saving the whiteboard to her > file directory using the *toolbar disk icon*. This created a file > but the file won't load back into a whiteboard. Unfortunately I don't > normally have access to a Mac either. If anyone else does can you > check > this issue? > > Thanks. Dan > > On Tue, Jul 24, 2018 at 8:36 AM, Alvaro > wrote: > >> Ok, in the way: >> >> WB -> Tools -> Save as, >> >> ...works perfect png, jpg and pdf (Yosemite 10.10.x >> with my own OM 4.0.4 server), reloading to whiteboard. >> >> >> >> >> >> El mar, 24-07-2018 a las 18:14 +0700, Maxim Solodovnik escribió: >> > Actually WB contents can be saved multiple ways: >> > >> > 1) Actions->Download as PDF -> will export all WB pages with all >> > contents as images and create PDF out of it >> > 2) Actions->Download as PNG/JPG -> will export content of >> current >> > slide of current WB and export it as image >> > 3) WB->tools->Save as ("Disk" icon near "Undo") -> will save >> current >> > WB as JSON and put it to "Room files", this saved WB can then be >> > imported >> > >> > Black background for PNG is most probably caused by issue with >> > transparency >> > On Tue, Jul 24, 2018 at 5:33 PM Alvaro >> wrote: >> > > >> > > Maxim, you mean that is possible to save to "Disk" >> > > wb tool? >> > > >> > > Could you please tell me how? >> > > >> > > >> > > . >> > > >> > > El mar, 24-07-2018 a las 16:24 +0700, Maxim Solodovnik >> escribió: >> > > > to save WB in internal loadable >> > > > format (using "Disk" wb tool) >> > >> > >> > >> > > > > -- > Daniel Ascher, M.Ed. > President >>
Re: configuration
> IMO configurations are "atomic" features, i.e. something equivalent to > what we currently have in Admin->Configuration Are you thinking a list of options as in Admin->Configuration that lists all configurable permission items on a per group basis, for configuration e.g. "Create public rooms - true/false". If I understood you correctly, it sounds like a reasonable thing to do... Ron On Tue, Aug 7, 2018 at 8:46 AM Maxim Solodovnik wrote: > Hello Ron, > I'm chair and one of the core developers :))) > t to > Let's discuss what should be added in this thread > IMO configurations are "atomic" features, i.e. something equivalent to > what we currently have in Admin->Configuration > So we need to add options to group with care > On Tue, Aug 7, 2018 at 7:54 PM Ron Eggler wrote: > > > > Hi Maxim, > > > > Thanks for the reply! > > Are you a core developer and able to add more features? I could help > too, but I don't know my way around the source tree yet. > > > > > In case of "expert"/"requester" groups: what should happen in case > > > user is added to both groups? > > > > I would think that the permissions of the group with more/higher > priority applies, in this case "expert" - or one could mark groups with > permissions assigned mutually exclusive so that you can't assign two > "permission groups" to a single user... > > > > Ron > > On Mon, Aug 6, 2018 at 7:51 AM Maxim Solodovnik > wrote: > >> > >> Hello Ron, > >> > >> There are some options can be tuned using groups: > >> 1) Set up group admin > >> 2) Enable "restricted" files > >> 3) set up some group limits > >> No other options so far > >> > >> Options can be added (it might take some time) > >> But I believe additional options need to be designed/discussed carefully > >> > >> In case of "expert"/"requester" groups: what should happen in case > >> user is added to both groups? > >> On Sun, Aug 5, 2018 at 8:43 PM Ron Eggler wrote: > >> > > >> > HI, > >> > > >> > I'm new to OpenMeetings, so please bare with me. > >> > I've got a question regarding configuration: > >> > is it possible to allow loading different configurations depending on > what group the current user belongs to? > >> > for example I want an "expert" (group) to be able to schedule > meetings (incl create rooms etc.) where a "requester" (group) can only take > part in scheduled meetings in assigned rooms. > >> > If possible, is there any tutorials or a guide or something that > describe how to configure this? > >> > > >> > Thanks! > >> > Ron > >> > >> > >> > >> -- > >> WBR > >> Maxim aka solomax > > > > -- > WBR > Maxim aka solomax >
Re: Saved whiteboard won't load back into whiteboard (using Macbook Air)
Actually, I'm not sure I don't have Mac to test These 2 issues are browser independent, this is why I suspect this might be one of them On Wed, Aug 8, 2018 at 8:41 PM Daniel Ascher wrote: > Okay, you think this is the issue that Mac users are having? I'll ask one > of the folks with a Mac to test it. > > Thanks! Dan > > On Wed, Aug 8, 2018 at 1:39 AM, Maxim Solodovnik > wrote: > >> Hello Daniel, >> >> #2 was just addressed, could you please test if everything works for you >> as expected on demo-next https://om.alteametasoft.com:8443/next ? >> In case everything is OK I can start merge your current version with 4.0.5 >> >> On Wed, Aug 8, 2018 at 7:42 AM Maxim Solodovnik >> wrote: >> >>> Hello Daniel, >>> >>> I see 2 possibilities here >>> 1) https://markmail.org/message/x7szj63in4m3xzsb >>> 2) https://markmail.org/message/ee5u4p7zom5fow5v >>> >>> 1) is fixed, but not merged to your version, 2) need to be addressed >>> Will try to do it this week >>> Please ping me if I'll be too silent >>> >>> On Wed, Aug 8, 2018 at 3:07 AM Daniel Ascher < >>> aplusad...@aplustutoring.com> wrote: >>> A similar error was just reported by another tutor, also using a Mac. In this case she can't load files from the group files directory into any of the whiteboards. She is getting the same error as the other tutor. From my tutor: *"I know we're supposed to be able to drag and drop them from the Group Files menu, but when I grab the file and drag it, it shows a little plus and then it says javascript; - something like that. It won't actually load though."* I asked her if she can provide a screenshot. I'll let you know. Anyone else have a Mac they can test this with? Thanks. Dan On Thu, Jul 26, 2018 at 10:46 PM, Maxim Solodovnik < solomax...@gmail.com> wrote: > Great, thanks! > > On Thu, Jul 26, 2018 at 8:39 PM Daniel Ascher < > aplusad...@aplustutoring.com> wrote: > >> I have asked my tutor whose computer had this issue if she can try to >> do it again. Then I can direct you to the room so you can examine the >> file >> created. I'll keep you posted. Thanks. Dan >> >> On Tue, Jul 24, 2018 at 9:19 AM, Maxim Solodovnik < >> solomax...@gmail.com> wrote: >> >>> It is sad :( >>> I need something to investigate >>> >>> On Tue, Jul 24, 2018 at 8:16 PM Daniel Ascher < >>> aplusad...@aplustutoring.com> wrote: >>> I actually tried that but it didn't work from my PC (the file didn't load back into the whiteboard). Unfortunately the file no longer exists since I deleted it. :( On Tue, Jul 24, 2018 at 9:10 AM, Maxim Solodovnik < solomax...@gmail.com> wrote: > Hello Daniel, > > Maybe you have access to this saved WB? > Can you check if this exact file can be uploaded using your > machine? > If not the problem might be OS independent ... > > On Tue, Jul 24, 2018 at 7:53 PM Daniel Ascher < > aplusad...@aplustutoring.com> wrote: > >> Yes, the issue was with this person saving the whiteboard to her >> file directory using the *toolbar disk icon*. This created a >> file but the file won't load back into a whiteboard. Unfortunately I >> don't >> normally have access to a Mac either. If anyone else does can you >> check >> this issue? >> >> Thanks. Dan >> >> On Tue, Jul 24, 2018 at 8:36 AM, Alvaro >> wrote: >> >>> Ok, in the way: >>> >>> WB -> Tools -> Save as, >>> >>> ...works perfect png, jpg and pdf (Yosemite 10.10.x >>> with my own OM 4.0.4 server), reloading to whiteboard. >>> >>> >>> >>> >>> >>> El mar, 24-07-2018 a las 18:14 +0700, Maxim Solodovnik escribió: >>> > Actually WB contents can be saved multiple ways: >>> > >>> > 1) Actions->Download as PDF -> will export all WB pages with >>> all >>> > contents as images and create PDF out of it >>> > 2) Actions->Download as PNG/JPG -> will export content of >>> current >>> > slide of current WB and export it as image >>> > 3) WB->tools->Save as ("Disk" icon near "Undo") -> will save >>> current >>> > WB as JSON and put it to "Room files", this saved WB can then >>> be >>> > imported >>> > >>> > Black background for PNG is most probably caused by issue with >>> > transparency >>> > On Tue, Jul 24, 2018 at 5:33 PM Alvaro >>> wrote: >>> > > >>> > > Maxim, you mean that is possible to save to "Disk" >>> > > wb tool? >>> > > >>> > > Could you please tell me how? >>> > > >
Re: configuration
yes But such "group" options need to be carefully selected, and in each case we need to figure out "what will happen in case multiple groups with different values will be in effect" On Wed, Aug 8, 2018 at 9:20 PM Ron Eggler wrote: > > > IMO configurations are "atomic" features, i.e. something equivalent to > > what we currently have in Admin->Configuration > > Are you thinking a list of options as in Admin->Configuration that lists all > configurable permission items on a per group basis, for configuration e.g. > "Create public rooms - true/false". > > If I understood you correctly, it sounds like a reasonable thing to do... > > Ron > > On Tue, Aug 7, 2018 at 8:46 AM Maxim Solodovnik wrote: >> >> Hello Ron, >> I'm chair and one of the core developers :))) >> t to >> Let's discuss what should be added in this thread >> IMO configurations are "atomic" features, i.e. something equivalent to >> what we currently have in Admin->Configuration >> So we need to add options to group with care >> On Tue, Aug 7, 2018 at 7:54 PM Ron Eggler wrote: >> > >> > Hi Maxim, >> > >> > Thanks for the reply! >> > Are you a core developer and able to add more features? I could help too, >> > but I don't know my way around the source tree yet. >> > >> > > In case of "expert"/"requester" groups: what should happen in case >> > > user is added to both groups? >> > >> > I would think that the permissions of the group with more/higher priority >> > applies, in this case "expert" - or one could mark groups with permissions >> > assigned mutually exclusive so that you can't assign two "permission >> > groups" to a single user... >> > >> > Ron >> > On Mon, Aug 6, 2018 at 7:51 AM Maxim Solodovnik >> > wrote: >> >> >> >> Hello Ron, >> >> >> >> There are some options can be tuned using groups: >> >> 1) Set up group admin >> >> 2) Enable "restricted" files >> >> 3) set up some group limits >> >> No other options so far >> >> >> >> Options can be added (it might take some time) >> >> But I believe additional options need to be designed/discussed carefully >> >> >> >> In case of "expert"/"requester" groups: what should happen in case >> >> user is added to both groups? >> >> On Sun, Aug 5, 2018 at 8:43 PM Ron Eggler wrote: >> >> > >> >> > HI, >> >> > >> >> > I'm new to OpenMeetings, so please bare with me. >> >> > I've got a question regarding configuration: >> >> > is it possible to allow loading different configurations depending on >> >> > what group the current user belongs to? >> >> > for example I want an "expert" (group) to be able to schedule meetings >> >> > (incl create rooms etc.) where a "requester" (group) can only take part >> >> > in scheduled meetings in assigned rooms. >> >> > If possible, is there any tutorials or a guide or something that >> >> > describe how to configure this? >> >> > >> >> > Thanks! >> >> > Ron >> >> >> >> >> >> >> >> -- >> >> WBR >> >> Maxim aka solomax >> >> >> >> -- >> WBR >> Maxim aka solomax -- WBR Maxim aka solomax
Re: configuration
> "what will happen in case multiple groups with different values will > be in effect" I think that if a user is assigned to multiple groups, the permissions should be applied with a logic OR i.e. if a user "foo" is a member of "expert" and "requester" but only "expert" has the permission to "create public rooms" , "foo" should be able to "create public rooms". Kind of like in Linux, as soon as you add a user to a particular group, it will be able to appear & act as such is this what you were questioning? I'm open to hearing other suggestions, too! Ron On Wed, Aug 8, 2018 at 7:42 AM Maxim Solodovnik wrote: > yes > But such "group" options need to be carefully selected, and in each > case we need to figure out > "what will happen in case multiple groups with different values will > be in effect" > On Wed, Aug 8, 2018 at 9:20 PM Ron Eggler wrote: > > > > > IMO configurations are "atomic" features, i.e. something equivalent to > > > what we currently have in Admin->Configuration > > > > Are you thinking a list of options as in Admin->Configuration that lists > all configurable permission items on a per group basis, for configuration > e.g. > > "Create public rooms - true/false". > > > > If I understood you correctly, it sounds like a reasonable thing to do... > > > > Ron > > > > On Tue, Aug 7, 2018 at 8:46 AM Maxim Solodovnik > wrote: > >> > >> Hello Ron, > >> I'm chair and one of the core developers :))) > >> t to > >> Let's discuss what should be added in this thread > >> IMO configurations are "atomic" features, i.e. something equivalent to > >> what we currently have in Admin->Configuration > >> So we need to add options to group with care > >> On Tue, Aug 7, 2018 at 7:54 PM Ron Eggler wrote: > >> > > >> > Hi Maxim, > >> > > >> > Thanks for the reply! > >> > Are you a core developer and able to add more features? I could help > too, but I don't know my way around the source tree yet. > >> > > >> > > In case of "expert"/"requester" groups: what should happen in case > >> > > user is added to both groups? > >> > > >> > I would think that the permissions of the group with more/higher > priority applies, in this case "expert" - or one could mark groups with > permissions assigned mutually exclusive so that you can't assign two > "permission groups" to a single user... > >> > > >> > Ron > >> > On Mon, Aug 6, 2018 at 7:51 AM Maxim Solodovnik > wrote: > >> >> > >> >> Hello Ron, > >> >> > >> >> There are some options can be tuned using groups: > >> >> 1) Set up group admin > >> >> 2) Enable "restricted" files > >> >> 3) set up some group limits > >> >> No other options so far > >> >> > >> >> Options can be added (it might take some time) > >> >> But I believe additional options need to be designed/discussed > carefully > >> >> > >> >> In case of "expert"/"requester" groups: what should happen in case > >> >> user is added to both groups? > >> >> On Sun, Aug 5, 2018 at 8:43 PM Ron Eggler > wrote: > >> >> > > >> >> > HI, > >> >> > > >> >> > I'm new to OpenMeetings, so please bare with me. > >> >> > I've got a question regarding configuration: > >> >> > is it possible to allow loading different configurations depending > on what group the current user belongs to? > >> >> > for example I want an "expert" (group) to be able to schedule > meetings (incl create rooms etc.) where a "requester" (group) can only take > part in scheduled meetings in assigned rooms. > >> >> > If possible, is there any tutorials or a guide or something that > describe how to configure this? > >> >> > > >> >> > Thanks! > >> >> > Ron > >> >> > >> >> > >> >> > >> >> -- > >> >> WBR > >> >> Maxim aka solomax > >> > >> > >> > >> -- > >> WBR > >> Maxim aka solomax > > > > -- > WBR > Maxim aka solomax >
Re: Saved whiteboard won't load back into whiteboard (using Macbook Air)
I was able to test this on a Mac and it worked properly. I uploaded files into both "Room Files" and "Group Files" and was able to drag them into the whiteboard. So it worked on the demo instance. I also tried on my prod server and worked as well. Maxim - have you already made the changes to my server? Thanks. Dan On Wed, Aug 8, 2018 at 10:38 AM, Maxim Solodovnik wrote: > Actually, I'm not sure > I don't have Mac to test > These 2 issues are browser independent, this is why I suspect this might > be one of them > > On Wed, Aug 8, 2018 at 8:41 PM Daniel Ascher > wrote: > >> Okay, you think this is the issue that Mac users are having? I'll ask one >> of the folks with a Mac to test it. >> >> Thanks! Dan >> >> On Wed, Aug 8, 2018 at 1:39 AM, Maxim Solodovnik >> wrote: >> >>> Hello Daniel, >>> >>> #2 was just addressed, could you please test if everything works for you >>> as expected on demo-next https://om.alteametasoft.com:8443/next ? >>> In case everything is OK I can start merge your current version with >>> 4.0.5 >>> >>> On Wed, Aug 8, 2018 at 7:42 AM Maxim Solodovnik >>> wrote: >>> Hello Daniel, I see 2 possibilities here 1) https://markmail.org/message/x7szj63in4m3xzsb 2) https://markmail.org/message/ee5u4p7zom5fow5v 1) is fixed, but not merged to your version, 2) need to be addressed Will try to do it this week Please ping me if I'll be too silent On Wed, Aug 8, 2018 at 3:07 AM Daniel Ascher < aplusad...@aplustutoring.com> wrote: > A similar error was just reported by another tutor, also using a Mac. > In this case she can't load files from the group files directory into any > of the whiteboards. She is getting the same error as the other tutor. From > my tutor: *"I know we're supposed to be able to drag and drop them > from the Group Files menu, but when I grab the file and drag it, it shows > a > little plus and then it says javascript; - something like that. It won't > actually load though."* > > I asked her if she can provide a screenshot. I'll let you know. Anyone > else have a Mac they can test this with? > > Thanks. Dan > > On Thu, Jul 26, 2018 at 10:46 PM, Maxim Solodovnik < > solomax...@gmail.com> wrote: > >> Great, thanks! >> >> On Thu, Jul 26, 2018 at 8:39 PM Daniel Ascher < >> aplusad...@aplustutoring.com> wrote: >> >>> I have asked my tutor whose computer had this issue if she can try >>> to do it again. Then I can direct you to the room so you can examine the >>> file created. I'll keep you posted. Thanks. Dan >>> >>> On Tue, Jul 24, 2018 at 9:19 AM, Maxim Solodovnik < >>> solomax...@gmail.com> wrote: >>> It is sad :( I need something to investigate On Tue, Jul 24, 2018 at 8:16 PM Daniel Ascher < aplusad...@aplustutoring.com> wrote: > I actually tried that but it didn't work from my PC (the file > didn't load back into the whiteboard). Unfortunately the file no > longer > exists since I deleted it. :( > > On Tue, Jul 24, 2018 at 9:10 AM, Maxim Solodovnik < > solomax...@gmail.com> wrote: > >> Hello Daniel, >> >> Maybe you have access to this saved WB? >> Can you check if this exact file can be uploaded using your >> machine? >> If not the problem might be OS independent ... >> >> On Tue, Jul 24, 2018 at 7:53 PM Daniel Ascher < >> aplusad...@aplustutoring.com> wrote: >> >>> Yes, the issue was with this person saving the whiteboard to her >>> file directory using the *toolbar disk icon*. This created a >>> file but the file won't load back into a whiteboard. Unfortunately >>> I don't >>> normally have access to a Mac either. If anyone else does can you >>> check >>> this issue? >>> >>> Thanks. Dan >>> >>> On Tue, Jul 24, 2018 at 8:36 AM, Alvaro >>> wrote: >>> Ok, in the way: WB -> Tools -> Save as, ...works perfect png, jpg and pdf (Yosemite 10.10.x with my own OM 4.0.4 server), reloading to whiteboard. El mar, 24-07-2018 a las 18:14 +0700, Maxim Solodovnik escribió: > Actually WB contents can be saved multiple ways: > > 1) Actions->Download as PDF -> will export all WB pages with all > contents as images and create PDF out of it > 2) Actions->Download as PNG/JPG -> will export content of current > slide of current WB and export it as image > 3) WB->tools->Save as ("Disk" icon near "Undo") -> will save
RE: Conference Room creation update error
I just did the latest snapshot and the import worked as expected using the UI. I would say I had a corrupted back-up was the reason for the failure of placing profiles in the right area. I can confirm the whiteboard issue is resolved when creating a new WB an image will be uploaded. But now I see a new "clean up" item that may need to be addressed when ever time allows as this is not really a big issue. When you delete files and drag them up to the garbage, they files get deleted, but it looks like it leaves remnants of their file name and image icon stuck between the folder icons and where My files start (See attached) Once you exit and come back in, that is gone, so not really an issue. Just some housekeeping for later on. -Original Message- From: Maxim Solodovnik Sent: Wednesday, August 8, 2018 8:11 AM To: Openmeetings user-list Subject: Re: Conference Room creation update error Hello Aaron, Just have tested with UI restore from backup Profile picture import works as expected On Tue, Aug 7, 2018 at 1:06 PM Maxim Solodovnik wrote: > > No need to file JIRA :) > The issue was caused by fix for [OPENMEETINGS-1908] Should be fixed in > a new build On Tue, Aug 7, 2018 at 12:22 PM Maxim Solodovnik > wrote: > > > > Thanks for the report! > > Can you please check if this bug is reproducible on 4.0.4? > > (https://om.alteametasoft.com/openmeetings/) > > and file JIRA? > > On Tue, Aug 7, 2018 at 4:49 AM wrote: > > > > > > Ok looks like the error can be reproduced with the demo as well. > > > > > > When the room is 1st entered on a fresh reboot the white board is present > > > and you can upload a file to that. > > > > > > But if you close the original WB and then open a new WB you cannot upload > > > a file to the WB. It remains blank. > > > > > > I have attached the debug log but it does not tell much (to myself > > > that is) > > > > > > -Original Message- > > > From: Maxim Solodovnik > > > Sent: Monday, August 6, 2018 12:22 PM > > > To: Openmeetings user-list > > > Subject: Re: Conference Room creation update error > > > > > > Demo-next is updated to latest revision On Mon, Aug 6, 2018 at > > > 10:10 PM wrote: > > > > > > > > Ok. If they are skipped on import then no need to delete the dB > > > > object. I just noticed when the backup was ran they were still listed, > > > > was the only reason for the delete. > > > > > > > > If you/someone has the latest snapshot running (revision 3f2c95f) can > > > > they test something for me. I am currently running live with the > > > > startup script so I cannot get the debug information until after the > > > > day is over. But looks like I cannot upload a file to the WB. May be > > > > localized, but was wondering if one had the revision up and going if > > > > they could test. This is the same VM that has been ran previous > > > > version so all needed pacakges should already be installed. > > > > > > > > Demo looks like its still running some revisions back so couldn't test > > > > there. > > > > > > > > -Original Message- > > > > From: Maxim Solodovnik > > > > Sent: Monday, August 6, 2018 11:01 AM > > > > To: Openmeetings user-list > > > > Subject: Re: Conference Room creation update error > > > > > > > > Actually both command line and UI installers uses same java code > > > > I'll retest with UI installer ASAP > > > > > > > > According to your question: deleted/purged users are included > > > > into XML backup files, but are being skipped during import > > > > > > > > I would not recommend to run queries like 'delete from om_user > > > > where id = #' since data integrity will be broken Here is the > > > > brief list of what need to done for user "hard" delete > > > > https://issues.apache.org/jira/browse/OPENMEETINGS-1864 (hard > > > > delete > > > > section) > > > > On Sun, Aug 5, 2018 at 5:14 PM Aaron H wrote: > > > > > > > > > > Took a back-up of running system *one thing to note that prior to > > > > > back-up being preformed there was users that were purged, but also > > > > > deleted from the dB via manual process (delete from om_user where id > > > > > = #) Wasn't for sure if the back-up would pick up these "purged" > > > > > users reason for the manual deletion. Everything was restarted > > > > > before back-up was performed. > > > > > > > > > > Then followed the normal steps for a build > > > > > > > > > > Move current install to old > > > > > * mv /opt/current /opt/old > > > > > Delete existing dB and create new wGET new package and unzip > > > > > in /opt/current folder Run new install script *script copies > > > > > customization files from stored location into new install (can > > > > > supply list of files that are copied if needed) Restart server > > > > > Run sh red5.sh to start process Go through the setup process > > > > > and restart server once complete > > > > > * during setup the tick for install default objects is not > > > > > selected Log in as admin
Re: Saved whiteboard won't load back into whiteboard (using Macbook Air)
Hello Daniel, Actually drag'n'drop was working, And your server was only partially updated you can see the issues IF 1) you will try to drag the item using icon NOT name 2) if you will create new WB (will NOT click on it's name) and try to drag file to this new WB All above should be addressed On Thu, Aug 9, 2018 at 2:28 AM Daniel Ascher wrote: > I was able to test this on a Mac and it worked properly. I uploaded files > into both "Room Files" and "Group Files" and was able to drag them into the > whiteboard. So it worked on the demo instance. > > I also tried on my prod server and worked as well. Maxim - have you > already made the changes to my server? > > Thanks. Dan > > On Wed, Aug 8, 2018 at 10:38 AM, Maxim Solodovnik > wrote: > >> Actually, I'm not sure >> I don't have Mac to test >> These 2 issues are browser independent, this is why I suspect this might >> be one of them >> >> On Wed, Aug 8, 2018 at 8:41 PM Daniel Ascher < >> aplusad...@aplustutoring.com> wrote: >> >>> Okay, you think this is the issue that Mac users are having? I'll ask >>> one of the folks with a Mac to test it. >>> >>> Thanks! Dan >>> >>> On Wed, Aug 8, 2018 at 1:39 AM, Maxim Solodovnik >>> wrote: >>> Hello Daniel, #2 was just addressed, could you please test if everything works for you as expected on demo-next https://om.alteametasoft.com:8443/next ? In case everything is OK I can start merge your current version with 4.0.5 On Wed, Aug 8, 2018 at 7:42 AM Maxim Solodovnik wrote: > Hello Daniel, > > I see 2 possibilities here > 1) https://markmail.org/message/x7szj63in4m3xzsb > 2) https://markmail.org/message/ee5u4p7zom5fow5v > > 1) is fixed, but not merged to your version, 2) need to be addressed > Will try to do it this week > Please ping me if I'll be too silent > > On Wed, Aug 8, 2018 at 3:07 AM Daniel Ascher < > aplusad...@aplustutoring.com> wrote: > >> A similar error was just reported by another tutor, also using a Mac. >> In this case she can't load files from the group files directory into any >> of the whiteboards. She is getting the same error as the other tutor. >> From >> my tutor: *"I know we're supposed to be able to drag and drop them >> from the Group Files menu, but when I grab the file and drag it, it >> shows a >> little plus and then it says javascript; - something like that. It won't >> actually load though."* >> >> I asked her if she can provide a screenshot. I'll let you know. >> Anyone else have a Mac they can test this with? >> >> Thanks. Dan >> >> On Thu, Jul 26, 2018 at 10:46 PM, Maxim Solodovnik < >> solomax...@gmail.com> wrote: >> >>> Great, thanks! >>> >>> On Thu, Jul 26, 2018 at 8:39 PM Daniel Ascher < >>> aplusad...@aplustutoring.com> wrote: >>> I have asked my tutor whose computer had this issue if she can try to do it again. Then I can direct you to the room so you can examine the file created. I'll keep you posted. Thanks. Dan On Tue, Jul 24, 2018 at 9:19 AM, Maxim Solodovnik < solomax...@gmail.com> wrote: > It is sad :( > I need something to investigate > > On Tue, Jul 24, 2018 at 8:16 PM Daniel Ascher < > aplusad...@aplustutoring.com> wrote: > >> I actually tried that but it didn't work from my PC (the file >> didn't load back into the whiteboard). Unfortunately the file no >> longer >> exists since I deleted it. :( >> >> On Tue, Jul 24, 2018 at 9:10 AM, Maxim Solodovnik < >> solomax...@gmail.com> wrote: >> >>> Hello Daniel, >>> >>> Maybe you have access to this saved WB? >>> Can you check if this exact file can be uploaded using your >>> machine? >>> If not the problem might be OS independent ... >>> >>> On Tue, Jul 24, 2018 at 7:53 PM Daniel Ascher < >>> aplusad...@aplustutoring.com> wrote: >>> Yes, the issue was with this person saving the whiteboard to her file directory using the *toolbar disk icon*. This created a file but the file won't load back into a whiteboard. Unfortunately I don't normally have access to a Mac either. If anyone else does can you check this issue? Thanks. Dan On Tue, Jul 24, 2018 at 8:36 AM, Alvaro wrote: > Ok, in the way: > > WB -> Tools -> Save as, > > ...works perfect png, jpg and pdf (Yosemite 10.10.x > with my own OM 4.0.4 server), reloading to whiteboard. > > > > > >>>
Re: Conference Room creation update error
Should be fixed! Thanks for catching this! On Thu, Aug 9, 2018 at 3:50 AM wrote: > > I just did the latest snapshot and the import worked as expected using the > UI. I would say I had a corrupted back-up was the reason for the failure of > placing profiles in the right area. > > I can confirm the whiteboard issue is resolved when creating a new WB an > image will be uploaded. But now I see a new "clean up" item that may need to > be addressed when ever time allows as this is not really a big issue. > > When you delete files and drag them up to the garbage, they files get > deleted, but it looks like it leaves remnants of their file name and image > icon stuck between the folder icons and where My files start (See attached) > > Once you exit and come back in, that is gone, so not really an issue. Just > some housekeeping for later on. > > -Original Message- > From: Maxim Solodovnik > Sent: Wednesday, August 8, 2018 8:11 AM > To: Openmeetings user-list > Subject: Re: Conference Room creation update error > > Hello Aaron, > > Just have tested with UI restore from backup Profile picture import works as > expected On Tue, Aug 7, 2018 at 1:06 PM Maxim Solodovnik > wrote: > > > > No need to file JIRA :) > > The issue was caused by fix for [OPENMEETINGS-1908] Should be fixed in > > a new build On Tue, Aug 7, 2018 at 12:22 PM Maxim Solodovnik > > wrote: > > > > > > Thanks for the report! > > > Can you please check if this bug is reproducible on 4.0.4? > > > (https://om.alteametasoft.com/openmeetings/) > > > and file JIRA? > > > On Tue, Aug 7, 2018 at 4:49 AM wrote: > > > > > > > > Ok looks like the error can be reproduced with the demo as well. > > > > > > > > When the room is 1st entered on a fresh reboot the white board is > > > > present and you can upload a file to that. > > > > > > > > But if you close the original WB and then open a new WB you cannot > > > > upload a file to the WB. It remains blank. > > > > > > > > I have attached the debug log but it does not tell much (to myself > > > > that is) > > > > > > > > -Original Message- > > > > From: Maxim Solodovnik > > > > Sent: Monday, August 6, 2018 12:22 PM > > > > To: Openmeetings user-list > > > > Subject: Re: Conference Room creation update error > > > > > > > > Demo-next is updated to latest revision On Mon, Aug 6, 2018 at > > > > 10:10 PM wrote: > > > > > > > > > > Ok. If they are skipped on import then no need to delete the dB > > > > > object. I just noticed when the backup was ran they were still > > > > > listed, was the only reason for the delete. > > > > > > > > > > If you/someone has the latest snapshot running (revision 3f2c95f) can > > > > > they test something for me. I am currently running live with the > > > > > startup script so I cannot get the debug information until after the > > > > > day is over. But looks like I cannot upload a file to the WB. May > > > > > be localized, but was wondering if one had the revision up and going > > > > > if they could test. This is the same VM that has been ran previous > > > > > version so all needed pacakges should already be installed. > > > > > > > > > > Demo looks like its still running some revisions back so couldn't > > > > > test there. > > > > > > > > > > -Original Message- > > > > > From: Maxim Solodovnik > > > > > Sent: Monday, August 6, 2018 11:01 AM > > > > > To: Openmeetings user-list > > > > > Subject: Re: Conference Room creation update error > > > > > > > > > > Actually both command line and UI installers uses same java code > > > > > I'll retest with UI installer ASAP > > > > > > > > > > According to your question: deleted/purged users are included > > > > > into XML backup files, but are being skipped during import > > > > > > > > > > I would not recommend to run queries like 'delete from om_user > > > > > where id = #' since data integrity will be broken Here is the > > > > > brief list of what need to done for user "hard" delete > > > > > https://issues.apache.org/jira/browse/OPENMEETINGS-1864 (hard > > > > > delete > > > > > section) > > > > > On Sun, Aug 5, 2018 at 5:14 PM Aaron H wrote: > > > > > > > > > > > > Took a back-up of running system *one thing to note that prior to > > > > > > back-up being preformed there was users that were purged, but also > > > > > > deleted from the dB via manual process (delete from om_user where > > > > > > id = #) Wasn't for sure if the back-up would pick up these > > > > > > "purged" users reason for the manual deletion. Everything was > > > > > > restarted before back-up was performed. > > > > > > > > > > > > Then followed the normal steps for a build > > > > > > > > > > > > Move current install to old > > > > > > * mv /opt/current /opt/old > > > > > > Delete existing dB and create new wGET new package and unzip > > > > > > in /opt/current folder Run new install script *script copies > > > > > > customization files from stored location into new install (can > > > > > > su