Hello Maxim,
Am 02.12.2021 um 08:18 schrieb Maxim Solodovnik:
Hello Tom,
coturn config looks good
this config has placeholders like
listening-ip=$Docker-Bridge_Interface-IP$
do you have something like this in the openmeetings.properties as well?
These Placeholders are not in the real config,there are the according
ip-addresses ;-)
I used the placehodlers inside the published config to state clearly
which ip-address is used (coturn is listening as well to external ip and
docker bridge interface at the same time) where and inside
openmeetings.properties i use the ip of the external interface as
websocket-adress for kms and the external ip for kms.turn.url,
switching the kms.turn.url also to docker bridge ip leads to only seeing
my own streams so i kept using the external ip actually, but then i got
the mentioned switchingproblems when using a second room running on the
other node at the same time :-/
On Wed, 1 Dec 2021 at 22:42, Tom Meierjürgen <tomca...@web.de> wrote:
Am 18.11.2021 um 09:55 schrieb Tom Meierjürgen:
Am 18.11.2021 um 08:52 schrieb Maxim Solodovnik:
...(cut done stuff)
All i have to figure out now for my small 2 node cluster is why the switch to
another room on the other node still results in seeing only my own stream but
not the opponents (tested with 2 computers here in my lan and 2 others from
another lan at same time,after switch every computer has only its own streams
visible+hearable)...
Do you have TURN server?
Is it configured properly?
For sure i have one turnserver per node running ;-)
Heres my turnserver config stripped down to all lines without the commented
lines and personal information replaced by placeholders which tells the kind of
content, maybe i have forgoten something in there?
/etc/turnserver.conf :
######################Start#####################
listening-port=3478
listening-ip=$Docker-Bridge_Interface-IP$
listening-ip=$External-Node-IP$
listening-ip=$Internal-own-IPSEC/GRE-Tunnel-IP$
relay-ip=$Internal_own_IPSEC/GRE-Tunnel-IP$
min-port=49152
max-port=65535
fingerprint
use-auth-secret
static-auth-secret=$Same_secret_as_in_OM_Kurento-configurationpart_of_openmeetings.properties$
server-name=$Nameresolutionadress_of_the_node$
realm=$Domainame_as_Realm$
stale-nonce=0
log-file=/var/log/turnserver/turn.log
syslog
allowed-peer-ip=$Internal_other_nodes_IPSEC/GRE_Tunnel-IP$
allowed-peer-ip=$External_other_nodes_IP$
pidfile="/var/run/turnserver.pid"
###########################End################
when i put "lt-cred-mech" additionally in there as mentioned somewhere in the
mailinglist before, my coturn won´t start up and in the logs it tells me to use either
lt-cred-mech or use stat-auth but not both at the same time...
Hope this helps locating the reasons for my Node-switching problem with the
streams...
Does anyone on the list have a hint for me if this config has something in
which may cause the Node-Switchingproblems?
kind regards,
Tom
