Re: Writing a DataFrame is taking too long and huge space
But overall, I think the original approach is not correct.
If you get a single file in 10s GB, the approach is probably must be
reworked.
I don't see why you can't just write multiple CSV files using Spark, and
then concatenate them without Spark
On Fri, Mar 9, 2018 at 10:02 AM, Vadim Semenov wrote:
> You can use `.checkpoint` for that
>
> `df.sort(…).coalesce(1).write...` — `coalesce` will make `sort` to have
> only one partition, so sorting will take a lot of time
>
> `df.sort(…).repartition(1).write...` — `repartition` will add an explicit
> stage, but sorting will be lost, since it's a repartition
>
> ```
> sc.setCheckpointDir("/tmp/test")
> val checkpointedDf = df.sort(…).checkpoint(eager=true) // will save all
> partitions
> checkpointedDf.coalesce(1).write.csv(…) // will load checkpointed
> partitions in one task, concatenate them, and will write them out as a
> single file
> ```
>
> On Fri, Mar 9, 2018 at 9:47 AM, Deepak Sharma
> wrote:
>
>> I would suggest repartioning it to reasonable partitions may ne 500 and
>> save it to some intermediate working directory .
>> Finally read all the files from this working dir and then coalesce as 1
>> and save to final location.
>>
>> Thanks
>> Deepak
>>
>> On Fri, Mar 9, 2018, 20:12 Vadim Semenov wrote:
>>
>>> because `coalesce` gets propagated further up in the DAG in the last
>>> stage, so your last stage only has one task.
>>>
>>> You need to break your DAG so your expensive operations would be in a
>>> previous stage before the stage with `.coalesce(1)`
>>>
>>> On Fri, Mar 9, 2018 at 5:23 AM, Md. Rezaul Karim <
>>> rezaul.ka...@insight-centre.org> wrote:
>>>
Dear All,
I have a tiny CSV file, which is around 250MB. There are only 30
columns in the DataFrame. Now I'm trying to save the pre-processed
DataFrame as an another CSV file on disk for later usage.
However, I'm getting pissed off as writing the resultant DataFrame is
taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
file written on the disk is about 58GB!
Here's the sample code that I tried:
# Using repartition()
myDF.repartition(1).write.format("com.databricks.spark.csv")
.save("data/file.csv")
# Using coalesce()
myDF. coalesce(1).write.format("com.databricks.spark.csv").save("d
ata/file.csv")
Any better suggestion?
Md. Rezaul Karim, BSc, MSc
Research Scientist, Fraunhofer FIT, Germany
Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
eMail: rezaul.ka...@fit.fraunhofer.de
Tel: +49 241 80-21527 <+49%20241%208021527>
>>>
>>>
>>>
>>> --
>>> Sent from my iPhone
>>>
>>
>
>
> --
> Sent from my iPhone
>
--
Sent from my iPhone
Re: Writing a DataFrame is taking too long and huge space
Given you start with ~250MB but end up with 58GB seems like you’re generating
quite a bit of data.
Whether you use coalesce or repartition, still writing out 58GB with one core
is going to take a while.
Using Spark to do pre-processing but output a single file is not going to be
very efficient since you’re asking Spark to limit its parallelization even if
just the final stage to write data out.
What are you using downstream to read this file and why does it need to be a
single 58GB file? Could you simply keep it in Spark to keep the pipeline
optimized and avoid the data persistence step? For example, if you’re using R
or Python to do some downstream processing you could just make that part of
your pipeline vs writing it out and then reading it back in from another system.
From: Vadim Semenov
Date: Friday, March 9, 2018 at 9:42 AM
To: "Md. Rezaul Karim"
Cc: spark users
Subject: Re: Writing a DataFrame is taking too long and huge space
because `coalesce` gets propagated further up in the DAG in the last stage, so
your last stage only has one task.
You need to break your DAG so your expensive operations would be in a previous
stage before the stage with `.coalesce(1)`
On Fri, Mar 9, 2018 at 5:23 AM, Md. Rezaul Karim
mailto:rezaul.ka...@insight-centre.org>> wrote:
Dear All,
I have a tiny CSV file, which is around 250MB. There are only 30 columns in the
DataFrame. Now I'm trying to save the pre-processed DataFrame as an another CSV
file on disk for later usage.
However, I'm getting pissed off as writing the resultant DataFrame is taking
too long, which is about 4 to 5 hours. Nevertheless, the size of the file
written on the disk is about 58GB!
Here's the sample code that I tried:
# Using repartition()
myDF.repartition(1).write.format("com.databricks.spark.csv").save("data/file.csv")
# Using coalesce()
myDF. coalesce(1).write.format("com.databricks.spark.csv").save("data/file.csv")
Any better suggestion?
Md. Rezaul Karim, BSc, MSc
Research Scientist, Fraunhofer FIT, Germany
Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
eMail: rezaul.ka...@fit.fraunhofer.de<mailto:andrea.berna...@fit.fraunhofer.de>
Tel: +49 241 80-21527
--
Sent from my iPhone
Re: Writing a DataFrame is taking too long and huge space
You can use `.checkpoint` for that
`df.sort(…).coalesce(1).write...` — `coalesce` will make `sort` to have
only one partition, so sorting will take a lot of time
`df.sort(…).repartition(1).write...` — `repartition` will add an explicit
stage, but sorting will be lost, since it's a repartition
```
sc.setCheckpointDir("/tmp/test")
val checkpointedDf = df.sort(…).checkpoint(eager=true) // will save all
partitions
checkpointedDf.coalesce(1).write.csv(…) // will load checkpointed
partitions in one task, concatenate them, and will write them out as a
single file
```
On Fri, Mar 9, 2018 at 9:47 AM, Deepak Sharma wrote:
> I would suggest repartioning it to reasonable partitions may ne 500 and
> save it to some intermediate working directory .
> Finally read all the files from this working dir and then coalesce as 1
> and save to final location.
>
> Thanks
> Deepak
>
> On Fri, Mar 9, 2018, 20:12 Vadim Semenov wrote:
>
>> because `coalesce` gets propagated further up in the DAG in the last
>> stage, so your last stage only has one task.
>>
>> You need to break your DAG so your expensive operations would be in a
>> previous stage before the stage with `.coalesce(1)`
>>
>> On Fri, Mar 9, 2018 at 5:23 AM, Md. Rezaul Karim <
>> rezaul.ka...@insight-centre.org> wrote:
>>
>>> Dear All,
>>>
>>> I have a tiny CSV file, which is around 250MB. There are only 30 columns
>>> in the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
>>> another CSV file on disk for later usage.
>>>
>>> However, I'm getting pissed off as writing the resultant DataFrame is
>>> taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
>>> file written on the disk is about 58GB!
>>>
>>> Here's the sample code that I tried:
>>>
>>> # Using repartition()
>>> myDF.repartition(1).write.format("com.databricks.spark.
>>> csv").save("data/file.csv")
>>>
>>> # Using coalesce()
>>> myDF. coalesce(1).write.format("com.databricks.spark.csv").save("
>>> data/file.csv")
>>>
>>>
>>> Any better suggestion?
>>>
>>>
>>>
>>>
>>> Md. Rezaul Karim, BSc, MSc
>>> Research Scientist, Fraunhofer FIT, Germany
>>>
>>> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
>>>
>>> eMail: rezaul.ka...@fit.fraunhofer.de
>>>
>>> Tel: +49 241 80-21527 <+49%20241%208021527>
>>>
>>
>>
>>
>> --
>> Sent from my iPhone
>>
>
--
Sent from my iPhone
Re: Writing a DataFrame is taking too long and huge space
I would suggest repartioning it to reasonable partitions may ne 500 and
save it to some intermediate working directory .
Finally read all the files from this working dir and then coalesce as 1 and
save to final location.
Thanks
Deepak
On Fri, Mar 9, 2018, 20:12 Vadim Semenov wrote:
> because `coalesce` gets propagated further up in the DAG in the last
> stage, so your last stage only has one task.
>
> You need to break your DAG so your expensive operations would be in a
> previous stage before the stage with `.coalesce(1)`
>
> On Fri, Mar 9, 2018 at 5:23 AM, Md. Rezaul Karim <
> rezaul.ka...@insight-centre.org> wrote:
>
>> Dear All,
>>
>> I have a tiny CSV file, which is around 250MB. There are only 30 columns
>> in the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
>> another CSV file on disk for later usage.
>>
>> However, I'm getting pissed off as writing the resultant DataFrame is
>> taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
>> file written on the disk is about 58GB!
>>
>> Here's the sample code that I tried:
>>
>> # Using repartition()
>>
>> myDF.repartition(1).write.format("com.databricks.spark.csv").save("data/file.csv")
>>
>> # Using coalesce()
>> myDF.
>> coalesce(1).write.format("com.databricks.spark.csv").save("data/file.csv")
>>
>>
>> Any better suggestion?
>>
>>
>>
>>
>> Md. Rezaul Karim, BSc, MSc
>> Research Scientist, Fraunhofer FIT, Germany
>>
>> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
>>
>> eMail: rezaul.ka...@fit.fraunhofer.de
>> Tel: +49 241 80-21527 <+49%20241%208021527>
>>
>
>
>
> --
> Sent from my iPhone
>
Re: Writing a DataFrame is taking too long and huge space
because `coalesce` gets propagated further up in the DAG in the last stage,
so your last stage only has one task.
You need to break your DAG so your expensive operations would be in a
previous stage before the stage with `.coalesce(1)`
On Fri, Mar 9, 2018 at 5:23 AM, Md. Rezaul Karim <
rezaul.ka...@insight-centre.org> wrote:
> Dear All,
>
> I have a tiny CSV file, which is around 250MB. There are only 30 columns
> in the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
> another CSV file on disk for later usage.
>
> However, I'm getting pissed off as writing the resultant DataFrame is
> taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
> file written on the disk is about 58GB!
>
> Here's the sample code that I tried:
>
> # Using repartition()
> myDF.repartition(1).write.format("com.databricks.spark.
> csv").save("data/file.csv")
>
> # Using coalesce()
> myDF. coalesce(1).write.format("com.databricks.spark.csv").save("
> data/file.csv")
>
>
> Any better suggestion?
>
>
>
>
> Md. Rezaul Karim, BSc, MSc
> Research Scientist, Fraunhofer FIT, Germany
>
> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
>
> eMail: rezaul.ka...@fit.fraunhofer.de
> Tel: +49 241 80-21527 <+49%20241%208021527>
>
--
Sent from my iPhone
Re: Writing a DataFrame is taking too long and huge space
Hi All,
Thanks for prompt response. Really appreciated! Here's a few more info:
1. Spark version: 2.3.0
2. vCore: 8
3. RAM: 32GB
4. Deploy mode: Spark standalone
*Operation performed:* I did transformations using StringIndexer on some
columns and null imputations. That's all.
*Why writing back into CSV:* I need to write the dataframe into CSV to be
used by a non-Spark application. Nevertheless, I need to perform
pre-processing on a larger-dataset (about 2GB) and this one is just a
simple. So writing into parquet or ORC is not a viable option for me.
I was trying to use Spark for only pre-processing. By the way, I tried
using Spark builtin CSV library too.
Best,
Md. Rezaul Karim, BSc, MSc
Research Scientist, Fraunhofer FIT, Germany
Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
eMail: rezaul.ka...@fit.fraunhofer.de
Tel: +49 241 80-21527
On 9 March 2018 at 13:41, Teemu Heikkilä wrote:
> Sounds like you’re doing something else than just writing the same file
> back to disk, what your preprocessing consists?
>
> Sometimes you can save lot’s of space by using other formats but now we’re
> talking over 200x increase in file size so depending on the transformations
> for the data you might not get so huge savings by using some other format.
>
> If you can give more details about what you are doing with the data we
> could probably help with your task.
>
> Slowness probably happens because Spark is using disk to process the data
> into single partition for writing the single file, one thing to reconsider
> is that if you can merge the product files after the process or even
> pre-partition it for it’s final use case.
>
> - Teemu
>
> On 9.3.2018, at 12.23, Md. Rezaul Karim
> wrote:
>
> Dear All,
>
> I have a tiny CSV file, which is around 250MB. There are only 30 columns
> in the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
> another CSV file on disk for later usage.
>
> However, I'm getting pissed off as writing the resultant DataFrame is
> taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
> file written on the disk is about 58GB!
>
> Here's the sample code that I tried:
>
> # Using repartition()
> myDF.repartition(1).write.format("com.databricks.spark.
> csv").save("data/file.csv")
>
> # Using coalesce()
> myDF. coalesce(1).write.format("com.databricks.spark.csv").save("
> data/file.csv")
>
>
> Any better suggestion?
>
>
>
>
> Md. Rezaul Karim, BSc, MSc
> Research Scientist, Fraunhofer FIT, Germany
> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
> eMail: rezaul.ka...@fit.fraunhofer.de
> Tel: +49 241 80-21527 <+49%20241%208021527>
>
>
>
Re: Writing a DataFrame is taking too long and huge space
Sounds like you’re doing something else than just writing the same file back to
disk, what your preprocessing consists?
Sometimes you can save lot’s of space by using other formats but now we’re
talking over 200x increase in file size so depending on the transformations for
the data you might not get so huge savings by using some other format.
If you can give more details about what you are doing with the data we could
probably help with your task.
Slowness probably happens because Spark is using disk to process the data into
single partition for writing the single file, one thing to reconsider is that
if you can merge the product files after the process or even pre-partition it
for it’s final use case.
- Teemu
> On 9.3.2018, at 12.23, Md. Rezaul Karim
> wrote:
>
> Dear All,
>
> I have a tiny CSV file, which is around 250MB. There are only 30 columns in
> the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
> another CSV file on disk for later usage.
>
> However, I'm getting pissed off as writing the resultant DataFrame is taking
> too long, which is about 4 to 5 hours. Nevertheless, the size of the file
> written on the disk is about 58GB!
>
> Here's the sample code that I tried:
>
> # Using repartition()
> myDF.repartition(1).write.format("com.databricks.spark.csv").save("data/file.csv")
>
> # Using coalesce()
> myDF.
> coalesce(1).write.format("com.databricks.spark.csv").save("data/file.csv")
>
>
> Any better suggestion?
>
>
>
>
> Md. Rezaul Karim, BSc, MSc
> Research Scientist, Fraunhofer FIT, Germany
> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
> eMail: rezaul.ka...@fit.fraunhofer.de
>
> Tel: +49 241 80-21527
Re: Writing a DataFrame is taking too long and huge space
Which version of spark are you using?
The reason for asking this question is from Spark 2.x csv is internal
library so no need to save it with com.databricks.spark.csv package.
Moreover, taking time for this simple task is very much dependent upon your
cluster health. Could you please provide the details of the following
things (if you are using YARN)?
1. Number of nodes
2. VCores
3. Node Memory
an
Thanks,
Gourav Dutta
On Mar 9, 2018 5:35 PM, "Matteo Durighetto" wrote:
Hello, try to use parquet format with compression ( like snappy or lz4 ) so
the produced files will be smaller and it will generate less i/o. Moreover
normally parquet is more faster than csv format in reading for further
operations .
Another possible format is ORC file.
Kind Regards
Matteo
2018-03-09 11:23 GMT+01:00 Md. Rezaul Karim :
> Dear All,
>
> I have a tiny CSV file, which is around 250MB. There are only 30 columns
> in the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
> another CSV file on disk for later usage.
>
> However, I'm getting pissed off as writing the resultant DataFrame is
> taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
> file written on the disk is about 58GB!
>
> Here's the sample code that I tried:
>
> # Using repartition()
> myDF.repartition(1).write.format("com.databricks.spark.csv")
> .save("data/file.csv")
>
> # Using coalesce()
> myDF. coalesce(1).write.format("com.databricks.spark.csv").save("d
> ata/file.csv")
>
>
> Any better suggestion?
>
>
>
>
> Md. Rezaul Karim, BSc, MSc
> Research Scientist, Fraunhofer FIT, Germany
>
> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
>
> eMail: rezaul.ka...@fit.fraunhofer.de
> Tel: +49 241 80-21527 <+49%20241%208021527>
>
Re: Writing a DataFrame is taking too long and huge space
Hello, try to use parquet format with compression ( like snappy or lz4 ) so
the produced files will be smaller and it will generate less i/o. Moreover
normally parquet is more faster than csv format in reading for further
operations .
Another possible format is ORC file.
Kind Regards
Matteo
2018-03-09 11:23 GMT+01:00 Md. Rezaul Karim :
> Dear All,
>
> I have a tiny CSV file, which is around 250MB. There are only 30 columns
> in the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
> another CSV file on disk for later usage.
>
> However, I'm getting pissed off as writing the resultant DataFrame is
> taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
> file written on the disk is about 58GB!
>
> Here's the sample code that I tried:
>
> # Using repartition()
> myDF.repartition(1).write.format("com.databricks.spark.
> csv").save("data/file.csv")
>
> # Using coalesce()
> myDF. coalesce(1).write.format("com.databricks.spark.csv").save("
> data/file.csv")
>
>
> Any better suggestion?
>
>
>
>
> Md. Rezaul Karim, BSc, MSc
> Research Scientist, Fraunhofer FIT, Germany
>
> Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
>
> eMail: rezaul.ka...@fit.fraunhofer.de
> Tel: +49 241 80-21527 <+49%20241%208021527>
>
Writing a DataFrame is taking too long and huge space
Dear All,
I have a tiny CSV file, which is around 250MB. There are only 30 columns in
the DataFrame. Now I'm trying to save the pre-processed DataFrame as an
another CSV file on disk for later usage.
However, I'm getting pissed off as writing the resultant DataFrame is
taking too long, which is about 4 to 5 hours. Nevertheless, the size of the
file written on the disk is about 58GB!
Here's the sample code that I tried:
# Using repartition()
myDF.repartition(1).write.format("com.databricks.spark.csv").save("data/file.csv")
# Using coalesce()
myDF.
coalesce(1).write.format("com.databricks.spark.csv").save("data/file.csv")
Any better suggestion?
Md. Rezaul Karim, BSc, MSc
Research Scientist, Fraunhofer FIT, Germany
Ph.D. Researcher, Information Systems, RWTH Aachen University, Germany
eMail: rezaul.ka...@fit.fraunhofer.de
Tel: +49 241 80-21527
