Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-18 Thread Steven Liang 

  
  
Hi Chiradeep,
  
  Thank you very much.
  My problem has been solved. The reason is the space of my temp
  primary storage had not enough.
  After I added a new primary storage, the new ips was able to be
  assigned.
  Thank you for your teaching me using Cloudmonkey.
  
  Regards,
  Steven
  
  
  
  On 12/17/2013 04:45 PM, Chiradeep Vittal wrote:


  
  Cloudmonkey is very user friendly. Just  if you
don't know the parameters
  
> list pods
count = 1
pod:
name = POD0
id = 83f13f18-7fa6-422b-be35-ecb8f4d75a9f
allocationstate = Enabled
endip = 172.16.15.200
gateway = 172.16.15.1
netmask = 255.255.255.0
startip = 172.16.15.2
zoneid = 640b7dff-c1a8-45d3-83b3-749614ae7225
zonename = Sandbox-simulator


> update pod 
allocationstate=  endip=            gateway=          id=  
              name=             netmask=          startip=      
   
> update pod startip=172.16.15.2 endip=172.16.15.202
  netmask=255.255.255.0 gateway=172.16.15.1
  id=83f13f18-7fa6-422b-be35-ecb8f4d75a9f
pod:
name = POD0
id = 83f13f18-7fa6-422b-be35-ecb8f4d75a9f
allocationstate = Enabled
endip = 172.16.15.202
gateway = 172.16.15.1
netmask = 255.255.255.0
startip = 172.16.15.2
zoneid = 640b7dff-c1a8-45d3-83b3-749614ae7225
zonename = Sandbox-simulator
  
  
  
  
  
  

  From: Steven Liang <stevenli...@yesup.com>
  Reply-To: "users@cloudstack.apache.org"
  <users@cloudstack.apache.org>
  Date: Tuesday, December
  17, 2013 12:24 PM
  To: "users@cloudstack.apache.org"
  <users@cloudstack.apache.org>
          Subject: Re: How to add
  new IPs on CS 4.2 (Basic Networking)?




  
Thank you, Chiradeep.
  I am not very familiar with cloudmonkey. Most time I just
  uses it for "list".
  Could you give me a example 'update pod'?
  Thank you.
  The following is the list of my two pods.
+--+--+--+-+--+---+--++--+
  |    endip | name |   startip    | allocationstate
  |    zoneid    |    netmask   
  |  id  |  gateway   |
  zonename |
+--+--+--+-+--+---+--++--+
  | 172.16.1.250 | pod1 | 172.16.1.230 | Enabled |
  eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 |
  14de769a-16d6-4b4b-b4cd-6f088c5e1654 | 172.16.1.1 | zone1
  |
  | 172.16.2.250 | pod2 | 172.16.2.230 | Enabled |
  eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 |
  cd558724-6a77-40fa-8df8-acd82f12911f | 172.16.2.1 | zone1
  |
+--+--+--+-+--+---+--++--+
  
  
  
  On 12/16/2013 07:19 PM, Chiradeep Vittal wrote:


  Steven, I assume you want to add ip addresses that are available to VMs.
I am also assuming that the IP for VMs is drawn from the pod ip range. In
that case, you can use the 'update pod' api with cloudmonkey.

On 12/16/13 1:44 PM, "Steven Liang"  wrote:


  
Hi James,

Thank you anyway.
But I don't understand what Mr. Chiradeep said.
I listed my pods using cloudmonkey, the two pods have the same netmask
and gateway(management ips).
What should I update? Please help me.
Thank you.

Steven



On 12/16/2013 04:35 PM, ogiljae wrote:


  Hi,

Sorry about confusing.
The way I wrote is for advanced network not basic zone.
I believe that you should stick to Mr. Chiradeep's guide.

James.


On 12/17/13, 6:29 AM, Steven Liang wrote:

  
Hi Giljae,

I can not read your picture, can you send me again?
BTW, I didn't set any vlans, you mean I must set vlan?
Thank you.

Steven

On 12/16/2013 04:24 PM, giljae o wrote:


  Hi,

You can add additional public ip addresses with the new vlan or
existing vlan on UI below.

Inline image 1


On Tue, Dec 17, 2013 at 5:

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-17 Thread Chiradeep Vittal 
Cloudmonkey is very user friendly. Just  if you don't know the parameters
> list pods
count = 1
pod:
name = POD0
id = 83f13f18-7fa6-422b-be35-ecb8f4d75a9f
allocationstate = Enabled
endip = 172.16.15.200
gateway = 172.16.15.1
netmask = 255.255.255.0
startip = 172.16.15.2
zoneid = 640b7dff-c1a8-45d3-83b3-749614ae7225
zonename = Sandbox-simulator

> update pod
allocationstate=  endip=gateway=  id=   name=   
  netmask=  startip=
> update pod startip=172.16.15.2 endip=172.16.15.202 netmask=255.255.255.0 
> gateway=172.16.15.1 id=83f13f18-7fa6-422b-be35-ecb8f4d75a9f
pod:
name = POD0
id = 83f13f18-7fa6-422b-be35-ecb8f4d75a9f
allocationstate = Enabled
endip = 172.16.15.202
gateway = 172.16.15.1
netmask = 255.255.255.0
startip = 172.16.15.2
zoneid = 640b7dff-c1a8-45d3-83b3-749614ae7225
zonename = Sandbox-simulator


From: Steven Liang mailto:stevenli...@yesup.com>>
Reply-To: "users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
mailto:users@cloudstack.apache.org>>
Date: Tuesday, December 17, 2013 12:24 PM
To: "users@cloudstack.apache.org<mailto:users@cloudstack.apache.org>" 
mailto:users@cloudstack.apache.org>>
Subject: Re: How to add new IPs on CS 4.2 (Basic Networking)?

Thank you, Chiradeep.
I am not very familiar with cloudmonkey. Most time I just uses it for "list".
Could you give me a example 'update pod'?
Thank you.
The following is the list of my two pods.
+--+--+--+-+--+---+--++--+
|endip | name |   startip| allocationstate |zoneid  
  |netmask|  id  |  gateway 
  | zonename |
+--+--+--+-+--+---+--++--+
| 172.16.1.250 | pod1 | 172.16.1.230 | Enabled | 
eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 | 
14de769a-16d6-4b4b-b4cd-6f088c5e1654 | 172.16.1.1 | zone1 |
| 172.16.2.250 | pod2 | 172.16.2.230 | Enabled | 
eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 | 
cd558724-6a77-40fa-8df8-acd82f12911f | 172.16.2.1 | zone1 |
+--+--+--+-+--+---+--++--+



On 12/16/2013 07:19 PM, Chiradeep Vittal wrote:

Steven, I assume you want to add ip addresses that are available to VMs.
I am also assuming that the IP for VMs is drawn from the pod ip range. In
that case, you can use the 'update pod' api with cloudmonkey.

On 12/16/13 1:44 PM, "Steven Liang" 
<mailto:stevenli...@yesup.com> wrote:



Hi James,

Thank you anyway.
But I don't understand what Mr. Chiradeep said.
I listed my pods using cloudmonkey, the two pods have the same netmask
and gateway(management ips).
What should I update? Please help me.
Thank you.

Steven



On 12/16/2013 04:35 PM, ogiljae wrote:


Hi,

Sorry about confusing.
The way I wrote is for advanced network not basic zone.
I believe that you should stick to Mr. Chiradeep's guide.

James.


On 12/17/13, 6:29 AM, Steven Liang wrote:


Hi Giljae,

I can not read your picture, can you send me again?
BTW, I didn't set any vlans, you mean I must set vlan?
Thank you.

Steven

On 12/16/2013 04:24 PM, giljae o wrote:


Hi,

You can add additional public ip addresses with the new vlan or
existing vlan on UI below.

Inline image 1


On Tue, Dec 17, 2013 at 5:27 AM, Steven 
Liangmailto:stevenli...@yesup.com><mailto:stevenli...@yesup.com><mailto:stevenli...@yesup.com>>
  wrote:

 Hi Chiradeep,

 Thank you for updating.
 I haven't tried. Can I use cloudmonkey? I've installed
 cloudmonkey, just
 used for "list".

 Steven


 On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
 >  Have you tried expanding your pod with
 >


http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.
html
 >
 >  On 12/16/13 7:22 AM, "Steven 
Liang"mailto:stevenli...@yesup.com>
 <mailto:stevenli...@yesup.com><mailto:stevenli...@yesup.com>>  wrote:
 >
 >>  Hi All,
 >>
 >>  I have a question. If I would use up my existing public
IPs(for
 example:
 >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
 new pod?
 >>  Thank you.
 >>
 >>  Steven






--
Steven Liang
Linux System Admin
Phone: 1.416.499.8009 ext. 2865
Cell Phone: 1.647.718.5292
Email: stevenli...@yesup.com<mailto:stevenli...@yesup.com>
www.yesup.com<http://www.yesup.com> | 
account.yesup.com<http://account.yesup.com>

[Yesup]

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-17 Thread Steven Liang 

  
  
Thank you, Chiradeep.
  I am not very familiar with cloudmonkey. Most time I just uses it
  for "list".
  Could you give me a example 'update pod'?
  Thank you.
  The following is the list of my two pods.
+--+--+--+-+--+---+--++--+
  |    endip | name |   startip    | allocationstate
  |    zoneid    |    netmask   
  |  id  |  gateway   | zonename |
+--+--+--+-+--+---+--++--+
  | 172.16.1.250 | pod1 | 172.16.1.230 | Enabled |
  eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 |
  14de769a-16d6-4b4b-b4cd-6f088c5e1654 | 172.16.1.1 | zone1 |
  | 172.16.2.250 | pod2 | 172.16.2.230 | Enabled |
  eaf557a8-2710-42a0-8ae1-ccd262c3f29c | 255.255.255.0 |
  cd558724-6a77-40fa-8df8-acd82f12911f | 172.16.2.1 | zone1 |
+--+--+--+-+--+---+--++--+
  
  
  
  On 12/16/2013 07:19 PM, Chiradeep Vittal wrote:


  Steven, I assume you want to add ip addresses that are available to VMs.
I am also assuming that the IP for VMs is drawn from the pod ip range. In
that case, you can use the 'update pod' api with cloudmonkey.

On 12/16/13 1:44 PM, "Steven Liang"  wrote:


  
Hi James,

Thank you anyway.
But I don't understand what Mr. Chiradeep said.
I listed my pods using cloudmonkey, the two pods have the same netmask
and gateway(management ips).
What should I update? Please help me.
Thank you.

Steven



On 12/16/2013 04:35 PM, ogiljae wrote:


  Hi,

Sorry about confusing.
The way I wrote is for advanced network not basic zone.
I believe that you should stick to Mr. Chiradeep's guide.

James.


On 12/17/13, 6:29 AM, Steven Liang wrote:

  
Hi Giljae,

I can not read your picture, can you send me again?
BTW, I didn't set any vlans, you mean I must set vlan?
Thank you.

Steven

On 12/16/2013 04:24 PM, giljae o wrote:


  Hi,

You can add additional public ip addresses with the new vlan or
existing vlan on UI below.

Inline image 1


On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang  wrote:

 Hi Chiradeep,

 Thank you for updating.
 I haven't tried. Can I use cloudmonkey? I've installed
 cloudmonkey, just
 used for "list".

 Steven


 On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
 >  Have you tried expanding your pod with
 >


http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.
html
 >
 >  On 12/16/13 7:22 AM, "Steven Liang"  wrote:
 >
 >>  Hi All,
 >>
 >>  I have a question. If I would use up my existing public
IPs(for
 example:
 >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
 new pod?
 >>  Thank you.
 >>
 >>  Steven








  
  





  
  




-- 
  Steven Liang
Linux System Admin
Phone: 1.416.499.8009 ext. 2865
Cell Phone: 1.647.718.5292
Email: stevenli...@yesup.com
www.yesup.com | account.yesup.com

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Chiradeep Vittal 
Steven, I assume you want to add ip addresses that are available to VMs.
I am also assuming that the IP for VMs is drawn from the pod ip range. In
that case, you can use the 'update pod' api with cloudmonkey.

On 12/16/13 1:44 PM, "Steven Liang"  wrote:

>Hi James,
>
>Thank you anyway.
>But I don't understand what Mr. Chiradeep said.
>I listed my pods using cloudmonkey, the two pods have the same netmask
>and gateway(management ips).
>What should I update? Please help me.
>Thank you.
>
>Steven
>
>
>
>On 12/16/2013 04:35 PM, ogiljae wrote:
>> Hi,
>>
>> Sorry about confusing.
>> The way I wrote is for advanced network not basic zone.
>> I believe that you should stick to Mr. Chiradeep's guide.
>>
>> James.
>>
>>
>> On 12/17/13, 6:29 AM, Steven Liang wrote:
>>> Hi Giljae,
>>>
>>> I can not read your picture, can you send me again?
>>> BTW, I didn't set any vlans, you mean I must set vlan?
>>> Thank you.
>>>
>>> Steven
>>>
>>> On 12/16/2013 04:24 PM, giljae o wrote:
 Hi,

 You can add additional public ip addresses with the new vlan or
 existing vlan on UI below.

 Inline image 1


 On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang>>> >  wrote:

  Hi Chiradeep,

  Thank you for updating.
  I haven't tried. Can I use cloudmonkey? I've installed
  cloudmonkey, just
  used for "list".

  Steven


  On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
  >  Have you tried expanding your pod with
  >
 
 
http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.
html
  >
  >  On 12/16/13 7:22 AM, "Steven Liang">>>  >  wrote:
  >
  >>  Hi All,
  >>
  >>  I have a question. If I would use up my existing public
 IPs(for
  example:
  >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
  new pod?
  >>  Thank you.
  >>
  >>  Steven



>>>
>>>
>>
>
>

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Ogiljae 

Hi.

I think what Mr.Chiradeep said is for gmt ip not for public ip address.
How about using " add publicipaddess" on cloudmonkey or using UI manu : 
infrastructure -> zone -> network -> guest network .

James.



Sent from Samsung Galaxy NoteSteven Liang  wrote:Hi 
James,

Thank you anyway.
But I don't understand what Mr. Chiradeep said.
I listed my pods using cloudmonkey, the two pods have the same netmask
and gateway(management ips).
What should I update? Please help me.
Thank you.

Steven



On 12/16/2013 04:35 PM, ogiljae wrote:
> Hi,
>
> Sorry about confusing.
> The way I wrote is for advanced network not basic zone.
> I believe that you should stick to Mr. Chiradeep's guide.
>
> James.
>
>
> On 12/17/13, 6:29 AM, Steven Liang wrote:
>> Hi Giljae,
>>
>> I can not read your picture, can you send me again?
>> BTW, I didn't set any vlans, you mean I must set vlan?
>> Thank you.
>>
>> Steven
>>
>> On 12/16/2013 04:24 PM, giljae o wrote:
>>> Hi,
>>>
>>> You can add additional public ip addresses with the new vlan or
>>> existing vlan on UI below.
>>>
>>> Inline image 1
>>>
>>>
>>> On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang>> >  wrote:
>>>
>>>  Hi Chiradeep,
>>>
>>>  Thank you for updating.
>>>  I haven't tried. Can I use cloudmonkey? I've installed
>>>  cloudmonkey, just
>>>  used for "list".
>>>
>>>  Steven
>>>
>>>
>>>  On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
>>>  >  Have you tried expanding your pod with
>>>  >
>>> 
>>> http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html
>>>  >
>>>  >  On 12/16/13 7:22 AM, "Steven Liang">>  >  wrote:
>>>  >
>>>  >>  Hi All,
>>>  >>
>>>  >>  I have a question. If I would use up my existing public
>>> IPs(for
>>>  example:
>>>  >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
>>>  new pod?
>>>  >>  Thank you.
>>>  >>
>>>  >>  Steven
>>>
>>>
>>>
>>
>>
>

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Steven Liang 
Hi James,

Thank you anyway.
But I don't understand what Mr. Chiradeep said.
I listed my pods using cloudmonkey, the two pods have the same netmask
and gateway(management ips).
What should I update? Please help me.
Thank you.

Steven



On 12/16/2013 04:35 PM, ogiljae wrote:
> Hi,
>
> Sorry about confusing.
> The way I wrote is for advanced network not basic zone.
> I believe that you should stick to Mr. Chiradeep's guide.
>
> James.
>
>
> On 12/17/13, 6:29 AM, Steven Liang wrote:
>> Hi Giljae,
>>
>> I can not read your picture, can you send me again?
>> BTW, I didn't set any vlans, you mean I must set vlan?
>> Thank you.
>>
>> Steven
>>
>> On 12/16/2013 04:24 PM, giljae o wrote:
>>> Hi,
>>>
>>> You can add additional public ip addresses with the new vlan or
>>> existing vlan on UI below.
>>>
>>> Inline image 1
>>>
>>>
>>> On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang>> >  wrote:
>>>
>>>  Hi Chiradeep,
>>>
>>>  Thank you for updating.
>>>  I haven't tried. Can I use cloudmonkey? I've installed
>>>  cloudmonkey, just
>>>  used for "list".
>>>
>>>  Steven
>>>
>>>
>>>  On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
>>>  >  Have you tried expanding your pod with
>>>  >
>>> 
>>> http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html
>>>  >
>>>  >  On 12/16/13 7:22 AM, "Steven Liang">>  >  wrote:
>>>  >
>>>  >>  Hi All,
>>>  >>
>>>  >>  I have a question. If I would use up my existing public
>>> IPs(for
>>>  example:
>>>  >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
>>>  new pod?
>>>  >>  Thank you.
>>>  >>
>>>  >>  Steven
>>>
>>>
>>>
>>
>>
>

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread ogiljae 

Hi,

Sorry about confusing.
The way I wrote is for advanced network not basic zone.
I believe that you should stick to Mr. Chiradeep's guide.

James.


On 12/17/13, 6:29 AM, Steven Liang wrote:

Hi Giljae,

I can not read your picture, can you send me again?
BTW, I didn't set any vlans, you mean I must set vlan?
Thank you.

Steven

On 12/16/2013 04:24 PM, giljae o wrote:

Hi,

You can add additional public ip addresses with the new vlan or
existing vlan on UI below.

Inline image 1


On Tue, Dec 17, 2013 at 5:27 AM, Steven Liangmailto:stevenli...@yesup.com>>  wrote:

 Hi Chiradeep,

 Thank you for updating.
 I haven't tried. Can I use cloudmonkey? I've installed
 cloudmonkey, just
 used for "list".

 Steven


 On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
 >  Have you tried expanding your pod with
 >
 http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html
 >
 >  On 12/16/13 7:22 AM, "Steven Liang"mailto:stevenli...@yesup.com>>  wrote:
 >
 >>  Hi All,
 >>
 >>  I have a question. If I would use up my existing public IPs(for
 example:
 >>  xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
 new pod?
 >>  Thank you.
 >>
 >>  Steven

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Steven Liang 
Hi Giljae,

I can not read your picture, can you send me again?
BTW, I didn't set any vlans, you mean I must set vlan?
Thank you.

Steven

On 12/16/2013 04:24 PM, giljae o wrote:
> Hi,
>
> You can add additional public ip addresses with the new vlan or
> existing vlan on UI below.
>
> Inline image 1
>
>
> On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang  > wrote:
>
> Hi Chiradeep,
>
> Thank you for updating.
> I haven't tried. Can I use cloudmonkey? I've installed
> cloudmonkey, just
> used for "list".
>
> Steven
>
>
> On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
> > Have you tried expanding your pod with
> >
> 
> http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html
> >
> > On 12/16/13 7:22 AM, "Steven Liang"  > wrote:
> >
> >> Hi All,
> >>
> >> I have a question. If I would use up my existing public IPs(for
> example:
> >> xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my
> new pod?
> >> Thank you.
> >>
> >> Steven
>
>
>

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread giljae o 
Hi,

You can add additional public ip addresses with the new vlan or existing
vlan on UI below.

[image: Inline image 1]


On Tue, Dec 17, 2013 at 5:27 AM, Steven Liang  wrote:

> Hi Chiradeep,
>
> Thank you for updating.
> I haven't tried. Can I use cloudmonkey? I've installed cloudmonkey, just
> used for "list".
>
> Steven
>
>
> On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
> > Have you tried expanding your pod with
> >
> http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html
> >
> > On 12/16/13 7:22 AM, "Steven Liang"  wrote:
> >
> >> Hi All,
> >>
> >> I have a question. If I would use up my existing public IPs(for example:
> >> xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my new pod?
> >> Thank you.
> >>
> >> Steven
>
>
>

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Steven Liang 
Hi Chiradeep,

Thank you for updating.
I haven't tried. Can I use cloudmonkey? I've installed cloudmonkey, just
used for "list".

Steven


On 12/16/2013 03:11 PM, Chiradeep Vittal wrote:
> Have you tried expanding your pod with
> http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html
>
> On 12/16/13 7:22 AM, "Steven Liang"  wrote:
>
>> Hi All,
>>
>> I have a question. If I would use up my existing public IPs(for example:
>> xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my new pod?
>> Thank you.
>>
>> Steven

Re: How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Chiradeep Vittal 
Have you tried expanding your pod with
http://cloudstack.apache.org/docs/api/apidocs-4.2/root_admin/updatePod.html

On 12/16/13 7:22 AM, "Steven Liang"  wrote:

>Hi All,
>
>I have a question. If I would use up my existing public IPs(for example:
>xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my new pod?
>Thank you.
>
>Steven

How to add new IPs on CS 4.2 (Basic Networking)?

2013-12-16 Thread Steven Liang 
Hi All,

I have a question. If I would use up my existing public IPs(for example:
xxx.xxx.1.0/24), how to add new subnet(xxx.xxx.2.0/24) to my new pod?
Thank you.

Steven