Re: sms send problem
Hi, Try using DLRs; from them based on the status you will know exactly if the SMS reached the phone or not and if not, where it's at. Catalin Wen Jia, Gan wrote: Hi Rodrigo, Thanks for your reply. Sent. was what I got as a HTTP reply in the browser from http://localhost:13013/cgi-bin/sendsms?username=testerpassword=foobart o=90121494text=Hello+world Can I ask how do I differentiate between the different modes of Dispatched, Sent-to-smsc or Sent-to-modem? And after differentiating, how can I continue troubleshooting from there. Regards, Wen -Original Message- From: Rodrigo Cremaschi [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 27, 2005 10:59 PM To: Wen Jia, Gan Cc: users@kannel.org Subject: Re: sms send problem Hi Wen, Well, Sent in Kannel dictionary does not mean what we suppose at first, and may lead to some confusion. I think this should be changed to Dispatched, Sent-to-smsc or Sent-to-modem as this would be more appropriate. Rodrigo. On 9/27/05, Wen Jia, Gan [EMAIL PROTECTED] wrote: Hi there, I am new in setting up Kannel as SMS gateway, and am having problems sending SMS via HTTP interface. After sending the SMS using FireFox 1.0.4 running on Fedora Core 4: http://localhost:13013/cgi-bin/sendsms?username=testerpassword=foobar to=90121494text=Hello+world Kannel returns a page with Sent., but I do not see my GSM phone sending out the SMS, not the SMS being received. I am connected my SonyEricsson Z1010 GSM phone via infra-red(/dev/ircomm0) to use it as SMSC. I am able to communicate to the phone via infra-red using AT commands and using minicom. Would appreciate any help! Regards, Wen My smskannel.conf - group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar status-password = foo log-file = /tmp/kannel.log log-level = 1 box-deny-ip = *.*.*.* box-allow-ip = 127.0.0.1 access-log = /tmp/access.log # SMSC CONNECTIONS group = smsc smsc = at smsc-id = Z1010 device = /dev/ircomm0 speed = 9600 include = modems.conf #modems.conf is that obtained from the kannel distribution. # SMSBOX SETUP group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 log-file = /tmp/smsbox.log log-level = 0 access-log = /tmp/access.log # SEND-SMS USERS group = sendsms-user username = tester password = foobar # SERVICES group = sms-service keyword = nop text = You asked nothing and I did it! # there should be default always group = sms-service keyword = default text = No service specified My Output Messages --- /usr/sbin/bearerbox -v 1 smskannel.conf 2005-09-27 17:52:41 [18622] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-27 17:52:41 [18622] [0] WARNING: DLR: using default 'internal' for storage type. 2005-09-27 17:52:41 [18622] [0] INFO: DLR using storage type: internal 2005-09-27 17:52:41 [18622] [0] INFO: Added logfile `/tmp/kannel.log' with level `1'. 2005-09-27 17:52:41 [18622] [0] INFO: Started access logfile `/tmp/access.log'. 2005-09-27 17:52:41 [18622] [0] INFO: HTTP: Opening server at port 13000. 2005-09-27 17:52:41 [18622] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2005-09-27 17:52:41 [18622] [0] INFO: DLR rerouting for smsc id Z1010 disabled. 2005-09-27 17:52:41 [18622] [0] INFO: AT2[Z1010]: configuration doesn't show modemtype. will autodetect 2005-09-27 17:52:41 [18622] [0] INFO: 2005-09-27 17:52:41 [18622] [0] INFO: Kannel bearerbox II version 1.4.0 starting2005-09-27 17:52:41 [18622] [6] INFO: AT2[Z1010]: opening device 2005-09-27 17:52:41 [18622] [0] INFO: MAIN: Start-up done, entering mainloop 2005-09-27 17:52:42 [18622] [6] INFO: AT2[Z1010]: speed set to 9600 2005-09-27 17:52:52 [18622] [6] INFO: AT2[Z1010]: opening device 2005-09-27 17:52:52 [18622] [6] WARNING: AT2[Z1010]: trying to open device with not closed device!!! Please report!!! 2005-09-27 17:52:52 [18622] [6] INFO: AT2[Z1010]: closing device 2005-09-27 17:53:37 [18622] [8] INFO: Client connected from 127.0.0.1 2005-09-27 17:54:22 [18622] [8] INFO: Connection closed by the box 127.0.0.1 2005-09-27 17:54:27 [18622] [0] WARNING: Killing signal or HTTP admin command received, shutting down... - /usr/sbin/smsbox -v 1 smskannel.conf 2005-09-27 17:53:37 [18638] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-27 17:53:37 [18638] [0] INFO: Starting to log to file /tmp/smsbox.log level 0 2005-09-27 17:53:37 [18638] [0] INFO: Added logfile `/tmp/smsbox.log' with level `0'. 2005-09-27 17:53:37 [18638] [0] INFO: Service global sender set as '13013' 2005-09-27 17:53:37 [18638] [0] INFO: Logging accesses to '/tmp/access.log'. 2005-09-27 17:53:37 [18638] [0] INFO: Started access logfile `/tmp/access.log'. 2005-09-27 17:53:37 [18638] [0] INFO: HTTP: Opening server at port 13013. 2005-09-27 17:53:37 [18638] [0] INFO: Set up send
RE: sms send problem
Title: RE: sms send problem Hi Catalin, Rodrigo, Thanks for both your advice! I have managed to solve my problem. It seems that the modemtype and the AT variables in the provided modem.conf are not compatible with my Sony Ericsson Z1010. I found this link which helped to solve my problem. Hope it benefits others facing similar problems too. http://henryjunior.com/blog/?p=12 Note: I was connecting my Z1010 to my USB port, so for device I was using /dev/ttyACM1 Thanks again to all who helped! Wen >From http://henryjunior.com/blog/?p=12 July 17th, 2005 I just got my Sony Ericsson T637 working with Kannel via Bluetooth (as a GSM modem). I looked around for the necessary init and config script for this phone and didnt find one so I am posting the configuration I created. Some aspects might not be necessary or could be overkill. The bottom line though is using these configurations I am able to send/receive/respond to SMS messages: # SMSC GSM group = smsc smsc = at modemtype = T630-T628 device = /dev/tty.T637-SerialPort1-1 speed = 9600 sim-buffering = true group = modems id = T630-T628 name = T630-T628 broken = true init-string = AT+CNMI=2,3,2,0,0;+CMGF=0 keepalive-cmd = AT+CBC;+CSQ;+CMGF=0 -Original Message- From: Rodrigo Cremaschi [mailto:[EMAIL PROTECTED]] Sent: Tue 9/27/2005 10:59 PM To: Wen Jia, Gan Cc: users@kannel.org Subject: Re: sms send problem Hi Wen, Well, Sent in Kannel dictionary does not mean what we suppose at first, and may lead to some confusion. I think this should be changed to Dispatched, Sent-to-smsc or Sent-to-modem as this would be more appropriate. Rodrigo. On 9/27/05, Wen Jia, Gan [EMAIL PROTECTED] wrote: Hi there, I am new in setting up Kannel as SMS gateway, and am having problems sending SMS via HTTP interface. After sending the SMS using FireFox 1.0.4 running on Fedora Core 4: http://localhost:13013/cgi-bin/sendsms?username=tester=foobar=90121494=Hello+world Kannel returns a page with Sent., but I do not see my GSM phone sending out the SMS, not the SMS being received. I am connected my SonyEricsson Z1010 GSM phone via infra-red(/dev/ircomm0) to use it as SMSC. I am able to communicate to the phone via infra-red using AT commands and using minicom. Would appreciate any help! Regards, Wen My smskannel.conf - group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar status-password = foo log-file = /tmp/kannel.log log-level = 1 box-deny-ip = *.*.*.* box-allow-ip = 127.0.0.1 access-log = /tmp/access.log # SMSC CONNECTIONS group = smsc smsc = at smsc-id = Z1010 device = /dev/ircomm0 speed = 9600 include = modems.conf #modems.conf is that obtained from the kannel distribution. # SMSBOX SETUP group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 log-file = /tmp/smsbox.log log-level = 0 access-log = /tmp/access.log # SEND-SMS USERS group = sendsms-user username = tester password = foobar # SERVICES group = sms-service keyword = nop text = You asked nothing and I did it! # there should be default always group = sms-service keyword = default text = No service specified My Output Messages --- /usr/sbin/bearerbox -v 1 smskannel.conf 2005-09-27 17:52:41 [18622] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-27 17:52:41 [18622] [0] WARNING: DLR: using default 'internal' for storage type. 2005-09-27 17:52:41 [18622] [0] INFO: DLR using storage type: internal 2005-09-27 17:52:41 [18622] [0] INFO: Added logfile `/tmp/kannel.log' with level `1'. 2005-09-27 17:52:41 [18622] [0] INFO: Started access logfile `/tmp/access.log'. 2005-09-27 17:52:41 [18622] [0] INFO: HTTP: Opening server at port 13000. 2005-09-27 17:52:41 [18622] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2005-09-27 17:52:41 [18622] [0] INFO: DLR rerouting for smsc id Z1010 disabled. 2005-09-27 17:52:41 [18622] [0] INFO: AT2[Z1010]: configuration doesn't show modemtype. will autodetect 2005-09-27 17:52:41 [18622] [0] INFO: 2005-09-27 17:52:41 [18622] [0] INFO: Kannel bearerbox II version 1.4.0 starting2005-09-27 17:52:41 [18622] [6] INFO: AT2[Z1010]: opening device 2005-09-27 17:52:41 [18622] [0] INFO: MAIN: Start-up done, entering mainloop 2005-09-27 17:52:42 [18622] [6] INFO: AT2[Z1010]: speed set to 9600 2005-09-27 17:52:52 [18622] [6] INFO: AT2[Z1010]: opening device 2005-09-27 17:52:52 [18622] [6] WARNING: AT2[Z1010]: trying to open device with not closed device!!! Please report!!! 2005-09-27 17:52:52 [18622] [6] INFO: AT2[Z1010]: closing device 2005-09-27 17:53:37 [18622] [8] INFO: Client connected from 127.0.0.1 2005-09-27 17:54:22 [18622] [8] INFO: Connection closed by the box 127.0.0.1 2005-09-27 17:54:27 [18622] [0] WARNING: Killing signal or HTTP admin command received, shutting down... - /
Re: sms send problem
Hi Wen, Well, Sent in Kannel dictionary does not mean what we suppose at first, and may lead to some confusion. I think this should be changed to Dispatched, Sent-to-smsc or Sent-to-modem as this would be more appropriate. Rodrigo. On 9/27/05, Wen Jia, Gan [EMAIL PROTECTED] wrote: Hi there, I am new in setting up Kannel as SMS gateway, and am having problems sending SMS via HTTP interface. After sending the SMS using FireFox 1.0.4 running on Fedora Core 4: http://localhost:13013/cgi-bin/sendsms?username=testerpassword=foobarto=90121494text=Hello+world Kannel returns a page with Sent., but I do not see my GSM phone sending out the SMS, not the SMS being received. I am connected my SonyEricsson Z1010 GSM phone via infra-red(/dev/ircomm0) to use it as SMSC. I am able to communicate to the phone via infra-red using AT commands and using minicom. Would appreciate any help! Regards, Wen My smskannel.conf - group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar status-password = foo log-file = /tmp/kannel.log log-level = 1 box-deny-ip = *.*.*.* box-allow-ip = 127.0.0.1 access-log = /tmp/access.log # SMSC CONNECTIONS group = smsc smsc = at smsc-id = Z1010 device = /dev/ircomm0 speed = 9600 include = modems.conf #modems.conf is that obtained from the kannel distribution. # SMSBOX SETUP group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 log-file = /tmp/smsbox.log log-level = 0 access-log = /tmp/access.log # SEND-SMS USERS group = sendsms-user username = tester password = foobar # SERVICES group = sms-service keyword = nop text = You asked nothing and I did it! # there should be default always group = sms-service keyword = default text = No service specified My Output Messages --- /usr/sbin/bearerbox -v 1 smskannel.conf 2005-09-27 17:52:41 [18622] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-27 17:52:41 [18622] [0] WARNING: DLR: using default 'internal' for storage type. 2005-09-27 17:52:41 [18622] [0] INFO: DLR using storage type: internal 2005-09-27 17:52:41 [18622] [0] INFO: Added logfile `/tmp/kannel.log' with level `1'. 2005-09-27 17:52:41 [18622] [0] INFO: Started access logfile `/tmp/access.log'. 2005-09-27 17:52:41 [18622] [0] INFO: HTTP: Opening server at port 13000. 2005-09-27 17:52:41 [18622] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2005-09-27 17:52:41 [18622] [0] INFO: DLR rerouting for smsc id Z1010 disabled. 2005-09-27 17:52:41 [18622] [0] INFO: AT2[Z1010]: configuration doesn't show modemtype. will autodetect 2005-09-27 17:52:41 [18622] [0] INFO: 2005-09-27 17:52:41 [18622] [0] INFO: Kannel bearerbox II version 1.4.0 starting2005-09-27 17:52:41 [18622] [6] INFO: AT2[Z1010]: opening device 2005-09-27 17:52:41 [18622] [0] INFO: MAIN: Start-up done, entering mainloop 2005-09-27 17:52:42 [18622] [6] INFO: AT2[Z1010]: speed set to 9600 2005-09-27 17:52:52 [18622] [6] INFO: AT2[Z1010]: opening device 2005-09-27 17:52:52 [18622] [6] WARNING: AT2[Z1010]: trying to open device with not closed device!!! Please report!!! 2005-09-27 17:52:52 [18622] [6] INFO: AT2[Z1010]: closing device 2005-09-27 17:53:37 [18622] [8] INFO: Client connected from 127.0.0.1 2005-09-27 17:54:22 [18622] [8] INFO: Connection closed by the box 127.0.0.1 2005-09-27 17:54:27 [18622] [0] WARNING: Killing signal or HTTP admin command received, shutting down... - /usr/sbin/smsbox -v 1 smskannel.conf 2005-09-27 17:53:37 [18638] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-27 17:53:37 [18638] [0] INFO: Starting to log to file /tmp/smsbox.log level 0 2005-09-27 17:53:37 [18638] [0] INFO: Added logfile `/tmp/smsbox.log' with level `0'. 2005-09-27 17:53:37 [18638] [0] INFO: Service global sender set as '13013' 2005-09-27 17:53:37 [18638] [0] INFO: Logging accesses to '/tmp/access.log'. 2005-09-27 17:53:37 [18638] [0] INFO: Started access logfile `/tmp/access.log'. 2005-09-27 17:53:37 [18638] [0] INFO: HTTP: Opening server at port 13013. 2005-09-27 17:53:37 [18638] [0] INFO: Set up send sms service at port 13013 2005-09-27 17:53:37 [18638] [0] INFO: Connected to bearerbox at localhost port 13001. 2005-09-27 17:53:52 [18638] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.1 2005-09-27 17:53:52 [18638] [3] INFO: sendsms used by tester 2005-09-27 17:53:52 [18638] [3] INFO: sendsms sender:tester:13013 (127.0.0.1) to:90121494 msg:Hello world 2005-09-27 17:53:53 [18638] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 - tail -f /tmp/smsbox.log 2005-09-27 17:58:59 [18704] [0] INFO: Added logfile `/tmp/smsbox.log' with level `0'.
Re: sms send problem
Hi John, Let me suggest you the reading of the following document, specially, chapter 4. http://www.kannel.org/download/1.3.2/arch-1.3.2/arch.html You can´t send SMS to internet and expect they will arrive to your phone. The only ways are: through a direct connection to an operator´s SMSC or using a GSM modem (v.g. GSM phone) connected to the serial port of your Kannel machine. FAKE SMSC is only for test purposes, not for sending nor receiving any messages. Rodrigo. On 9/12/05, john decot [EMAIL PROTECTED] wrote: Here are the logs which i get ./smsbox -v 1 smskannel.conf 2005-09-11 16:13:18 [3481] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-11 16:13:18 [3481] [0] INFO: Service global sender set as '13013' 2005-09-11 16:13:18 [3481] [0] INFO: HTTP: Opening server at port 13013. 2005-09-11 16:13:18 [3481] [0] INFO: Set up send sms service at port 13013 2005-09-11 16:13:18 [3481] [0] INFO: Connected to bearerbox at localhost port 13001. 2005-09-11 16:13:27 [3481] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.1 2005-09-11 16:13:28 [3481] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 2005-09-11 16:13:54 [3481] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.1 2005-09-11 16:13:54 [3481] [3] INFO: sendsms used by tester 2005-09-11 16:13:54 [3481] [3] INFO: sendsms sender:tester:13013 (127.0.0.1) to:xxxyy msg:hello 2005-09-11 16:13:56 [3481] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 ./bearerbox -v 1 smskannel.conf 2005-09-11 16:13:15 [3472] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 0 2005-09-11 16:13:15 [3472] [0] WARNING: DLR: using default 'internal' for storage type. 2005-09-11 16:13:15 [3472] [0] INFO: DLR using storage type: internal 2005-09-11 16:13:15 [3472] [0] INFO: HTTP: Opening server at port 13000. 2005-09-11 16:13:15 [3472] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2005-09-11 16:13:15 [3472] [0] INFO: DLR rerouting for smsc id (null) disabled. 2005-09-11 16:13:15 [3472] [0] INFO: HTTP: Opening server at port 10011. 2005-09-11 16:13:15 [3472] [0] INFO: HTTP[(null)]: Initiated and ready 2005-09-11 16:13:15 [3472] [0] INFO: 2005-09-11 16:13:15 [3472] [0] INFO: Kannel bearerbox II version 1.4.0 starting 2005-09-11 16:13:15 [3472] [0] INFO: MAIN: Start-up done, entering mainloop 2005-09-11 16:13:18 [3472] [9] INFO: Client connected from 127.0.0.1 2005-09-11 16:13:57 [3472] [12] ERROR: Error while gw_gethostbyname occurs. 2005-09-11 16:13:57 [3472] [12] ERROR: System error 1: Operation not permitted 2005-09-11 16:13:57 [3472] [12] ERROR: gethostbyname failed 2005-09-11 16:13:57 [3472] [12] ERROR: error connecting to server `localhost:13013' at port `13013' 2005-09-11 16:13:57 [3472] [12] ERROR: Couldn't send request to http://localhost:13013?username=testerpassword=foobarto=xxxyytext=hellofrom=13013coding=0dlr-url= 2005-09-11 16:13:57 [3472] [7] ERROR: HTTP[(null)]: Couldn't connect to SMS center (retrying in 10 seconds). smskannel.conf looks follows # # THIS IS A SAMPLE CONFIGURATION FOR SMS KANNEL # # It is run like this: # # 1% gw/bearerbox gw/smskannel.conf # 2% gw/smsbox gw/smskannel.conf # 3% test/fakesmsc -p 1 -H localhost -i 1 -m 100 123 345 text nop # # ..all 3 commands in separate shells (or screen sessions) # # For any modifications to this file, see Kannel User Guide # If that does not help, send email to users@kannel.org # # Kalle Marjola May 2000 # Changed for new fakesmsc version by Uoti Urpala Jan 2001 # Added service and sendsms for HTTP SMSC by Kalle Marjola Mar 2001 # group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar #status-password = foo #admin-deny-ip = admin-allow-ip = #log-file = /tmp/kannel.log #log-level = 0 box-deny-ip = *.*.*.* box-allow-ip = 127.0.0.1 #unified-prefix = +358,00358,0;+,00 #access-log = /tmp/access.log #store-file = /tmp/kannel.store #ssl-server-cert-file = cert.pem #ssl-server-key-file = key.pem #ssl-certkey-file = mycertandprivkeyfile.pem # SMSC CONNECTIONS group = smsc smsc = http system-type= kannel port = 10011 connect-allow-ip = 127.0.0.1 smsc-username= tester smsc-password= foobar send-url = http://localhost:13013; # SMSBOX SETUP group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 sendsms-chars = 0123456789 +- #log-file = /tmp/smsbox.log #log-level = 0 #access-log = /tmp/access.log # SEND-SMS USERS group = sendsms-user username = tester password = foobar #user-deny-ip = #user-allow-ip = # SERVICES group = sms-service keyword = nop text = You asked nothing and I did it! # there should be default always group = sms-service keyword = default text = No service specified Rene Kluwen [EMAIL PROTECTED] wrote: Did you set up an smsc connection under group =
RE: sms send problem
I think you better post this to the list. You still dont have any real SMSC connection. The group = smsc in your kannel.conf points back to the same Kannel instance... which doesnt have an smsc connection. Kind of like the chicken and the egg. Either install a GSM modem or get an account at one of the many service providers to send out sms messages. Rene Kluwen Chimit -Original Message-From: john decot [mailto:[EMAIL PROTECTED]Sent: zondag 11 september 2005 13:48To: Rene KluwenSubject: RE: sms send problem I think you can help me .here are the logs which i get ./smsbox -v 1 smskannel.conf2005-09-11 16:13:18 [3481] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 02005-09-11 16:13:18 [3481] [0] INFO: Service global sender set as '13013'2005-09-11 16:13:18 [3481] [0] INFO: HTTP: Opening server at port 13013.2005-09-11 16:13:18 [3481] [0] INFO: Set up send sms service at port 130132005-09-11 16:13:18 [3481] [0] INFO: Connected to bearerbox at localhost port 13001.2005-09-11 16:13:27 [3481] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.12005-09-11 16:13:28 [3481] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.12005-09-11 16:13:54 [3481] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.12005-09-11 16:13:54 [3481] [3] INFO: sendsms used by tester2005-09-11 16:13:54 [3481] [3] INFO: sendsms sender:tester:13013 (127.0.0.1) to:xxxyy msg:hello2005-09-11 16:13:56 [3481] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 ./bearerbox -v 1 smskannel.conf2005-09-11 16:13:15 [3472] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 02005-09-11 16:13:15 [3472] [0] WARNING: DLR: using default 'internal' for storage type.2005-09-11 16:13:15 [3472] [0] INFO: DLR using storage type: internal2005-09-11 16:13:15 [3472] [0] INFO: HTTP: Opening server at port 13000.2005-09-11 16:13:15 [3472] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100).2005-09-11 16:13:15 [3472] [0] INFO: DLR rerouting for smsc id (null) disabled.2005-09-11 16:13:15 [3472] [0] INFO: HTTP: Opening server at port 10011.2005-09-11 16:13:15 [3472] [0] INFO: HTTP[(null)]: Initiated and ready2005-09-11 16:13:15 [3472] [0] INFO: 2005-09-11 16:13:15 [3472] [0] INFO: Kannel bearerbox II version 1.4.0 starting2005-09-11 16:13:15 [3472] [0] INFO: MAIN: Start-up done, entering mainloop2005-09-11 16:13:18 [3472] [9] INFO: Client connected from 127.0.0.12005-09-11 16:13:57 [3472] [12] ERROR: Error while gw_gethostbyname occurs.2005-09-11 16:13:57 [3472] [12] ERROR: System error 1: Operation not permitted2005-09-11 16:13:57 [3472] [12] ERROR: gethostbyname failed2005-09-11 16:13:57 [3472] [12] ERROR: error connecting to server `localhost:13013' at port `13013'2005-09-11 16:13:57 [3472] [12] ERROR: Couldn't send request to http://localhost:13013?username=testerpassword=foobarto=xxxyytext=hellofrom=13013coding=0dlr-url=2005-09-11 16:13:57 [3472] [7] ERROR: HTTP[(null)]: Couldn't connect to SMS center (retrying in 10 seconds). smskannel.conf looks follows ## THIS IS A SAMPLE CONFIGURATION FOR SMS KANNEL## It is run like this:## 1% gw/bearerbox gw/smskannel.conf# 2% gw/smsbox gw/smskannel.conf# 3% test/fakesmsc -p 1 -H localhost -i 1 -m 100 "123 345 text nop"## ..all 3 commands in separate shells (or screen sessions)## For any modifications to this file, see Kannel User Guide# If that does not help, send email to users@kannel.org## Kalle Marjola May 2000# Changed for new fakesmsc version by Uoti Urpala Jan 2001# Added service and sendsms for HTTP SMSC by Kalle Marjola Mar 2001# group = coreadmin-port = 13000smsbox-port = 13001admin-password = bar#status-password = foo#admin-deny-ip = ""admin-allow-ip = ""#log-file = "/tmp/kannel.log"#log-level = 0box-deny-ip = "*.*.*.*"box-allow-ip = "127.0.0.1"#unified-prefix = "+358,00358,0;+,00"#access-log = "/tmp/access.log"#store-file = "/tmp/kannel.store"#ssl-server-cert-file = "cert.pem"#ssl-server-key-file = "key.pem"#ssl-certkey-file = "mycertandprivkeyfile.pem" # SMSC CONNECTIONS group = smscsmsc = httpsystem-type= kannelport = 10011connect-allow-ip = 127.0.0.1smsc-username= testersmsc-password= foobarsend-url = ""http://localhost:13013">http://localhost:13013"# SMSBOX SETUP group = smsboxbearerbox-host = localhostsendsms-port = 13013global-sender = 13013sendsms-chars = "0123456789 +-"#log-file = "/tmp/smsbox.log"#log-level = 0#access-log = "/tmp/access.log" # SEND-SMS USERS group = sendsms-userusername = testerpassword = foobar#user-deny-ip = ""#user-allow-ip = &q
RE: sms send problem
Here are the logs which i get ./smsbox -v 1 smskannel.conf2005-09-11 16:13:18 [3481] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 02005-09-11 16:13:18 [3481] [0] INFO: Service global sender set as '13013'2005-09-11 16:13:18 [3481] [0] INFO: HTTP: Opening server at port 13013.2005-09-11 16:13:18 [3481] [0] INFO: Set up send sms service at port 130132005-09-11 16:13:18 [3481] [0] INFO: Connected to bearerbox at localhost port 13001.2005-09-11 16:13:27 [3481] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.12005-09-11 16:13:28 [3481] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.12005-09-11 16:13:54 [3481] [3] INFO: smsbox: Got HTTP request /cgi-bin/sendsms from 127.0.0.12005-09-11 16:13:54 [3481] [3] INFO: sendsms used by tester2005-09-11 16:13:54 [3481] [3] INFO: sendsms sender:tester:13013 (127.0.0.1) to:xxxyy msg:hello2005-09-11 16:13:56 [3481] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 ./bearerbox -v 1 smskannel.conf2005-09-11 16:13:15 [3472] [0] INFO: Debug_lvl = 1, log_file = none, log_lvl = 02005-09-11 16:13:15 [3472] [0] WARNING: DLR: using default 'internal' for storage type.2005-09-11 16:13:15 [3472] [0] INFO: DLR using storage type: internal2005-09-11 16:13:15 [3472] [0] INFO: HTTP: Opening server at port 13000.2005-09-11 16:13:15 [3472] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100).2005-09-11 16:13:15 [3472] [0] INFO: DLR rerouting for smsc id (null) disabled.2005-09-11 16:13:15 [3472] [0] INFO: HTTP: Opening server at port 10011.2005-09-11 16:13:15 [3472] [0] INFO: HTTP[(null)]: Initiated and ready2005-09-11 16:13:15 [3472] [0] INFO: 2005-09-11 16:13:15 [3472] [0] INFO: Kannel bearerbox II version 1.4.0 starting2005-09-11 16:13:15 [3472] [0] INFO: MAIN: Start-up done, entering mainloop2005-09-11 16:13:18 [3472] [9] INFO: Client connected from 127.0.0.12005-09-11 16:13:57 [3472] [12] ERROR: Error while gw_gethostbyname occurs.2005-09-11 16:13:57 [3472] [12] ERROR: System error 1: Operation not permitted2005-09-11 16:13:57 [3472] [12] ERROR: gethostbyname failed2005-09-11 16:13:57 [3472] [12] ERROR: error connecting to server `localhost:13013' at port `13013'2005-09-11 16:13:57 [3472] [12] ERROR: Couldn't send request to http://localhost:13013?username=testerpassword=foobarto=xxxyytext=hellofrom=13013coding=0dlr-url=2005-09-11 16:13:57 [3472] [7] ERROR: HTTP[(null)]: Couldn't connect to SMS center (retrying in 10 seconds). smskannel.conf looks follows## THIS IS A SAMPLE CONFIGURATION FOR SMS KANNEL## It is run like this:## 1% gw/bearerbox gw/smskannel.conf# 2% gw/smsbox gw/smskannel.conf# 3% test/fakesmsc -p 1 -H localhost -i 1 -m 100 "123 345 text nop"## ..all 3 commands in separate shells (or screen sessions)## For any modifications to this file, see Kannel User Guide# If that does not help, send email to users@kannel.org## Kalle Marjola May 2000# Changed for new fakesmsc version by Uoti Urpala Jan 2001# Added service and sendsms for HTTP SMSC by Kalle Marjola Mar 2001#group = coreadmin-port = 13000smsbox-port = 13001admin-password = bar#status-password = foo#admin-deny-ip = ""admin-allow-ip = ""#log-file = "/tmp/kannel.log"#log-level = 0box-deny-ip = "*.*.*.*"box-allow-ip = "127.0.0.1"#unified-prefix = "+358,00358,0;+,00"#access-log = "/tmp/access.log"#store-file = "/tmp/kannel.store"#ssl-server-cert-file = "cert.pem"#ssl-server-key-file = "key.pem"#ssl-certkey-file = "mycertandprivkeyfile.pem" # SMSC CONNECTIONSgroup = smscsmsc = httpsystem-type= kannelport = 10011connect-allow-ip = 127.0.0.1smsc-username= testersmsc-password= foobarsend-url = ""http://localhost:13013">http://localhost:13013"# SMSBOX SETUPgroup = smsboxbearerbox-host = localhostsendsms-port = 13013global-sender = 13013sendsms-chars = "0123456789 +-"#log-file = "/tmp/smsbox.log"#log-level = 0#access-log = "/tmp/access.log"# SEND-SMS USERSgroup = sendsms-userusername = testerpassword = foobar#user-deny-ip = ""#user-allow-ip = ""# SERVICESgroup = sms-servicekeyword = noptext = "You asked nothing and I did it!"# there should be default alwaysgroup = sms-servicekeyword = defaulttext = "No service specified" Rene Kluwen [EMAIL PROTECTED] wrote:Did you set up an smsc connection under group = smsc in kannel.conf? Maybe it is a good idea to post your config. Rene KluwenChimit -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of john decotSent: vrijdag 9 september 2005 7:54To: users@kannel.orgSubject: sms send problem Hi all, i m first time to setting up kannel. i have used sample smskannel.conf and run the daemon. i have tried to sent sms from http. Logs show as follows: 2005-09-09 10:42:03 [3301] [3] INFO: sendsms sender:tester:13013 (127.0.0.1) to: xxxyy msg:hello2005-09-09 10:42:05 [3301] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.12005-09-09 10:44:30 [3301] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.12005-09-09
Re: sms send problem
John: Hello, from your post I understand you do not have a GSM modem as SMSC, nor do you have a connection to a real SMSC. So... you cannot send and SMS as a result. This is logical. I recomend further reading as to how this type of messaging works. Am i not understanding you maybe? If so, pls post your smskannel.conf so we can be of help Greetings, Alejandro - Original Message - From: john decot [EMAIL PROTECTED] To: users@kannel.org Sent: Thu, 8 Sep 2005 23:53:52 -0600 Subject: sms send problem Hi all, i m first time to setting up kannel. i have used sample smskannel.conf and run the daemon. i have tried to sent sms from http. Logs show as follows: 2005-09-09 10:42:03 [3301] [3] INFO: sendsms sender:tester:13013 (127.0.0.1) to: xxxyy msg:hello 2005-09-09 10:42:05 [3301] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 2005-09-09 10:44:30 [3301] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 2005-09-09 10:44:31 [3301] [3] INFO: smsbox: Got HTTP request /favicon.ico from 127.0.0.1 where xxx= country code yy= mobile no. web browser shows successfully sent. But i am not getting message in my mobile. I am connected to internet only no other hardware is there. i have heard that we can send message without using mobile set gateway. what may be the problem with my kannel. Any help will be apprieciated. thanks in advance. john. - Click here to donate to the Hurricane Katrina relief effort.
