Re: AR9280 won't initialize
29.06.2011, 00:04, Mohammed Shafi shafi.wirel...@gmail.com: 2011/6/25 Felix Fietkau n...@openwrt.org;: On 2011-06-25 4:08 PM, Misha Shnurapet wrote: Hi. I have a little problem. I replaced the old BCM4312 card on my Dell mini 1011 (10v) with: 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) But it won't work. First it crashed Linux: http://pastebin.com/YmEGcPK8 Then I installed a system update: http://funkyimg.com/u2/879/849/2.png http://pastebin.com/hWG6u7VJ And now it is: [ 30.589243] ath9k :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 30.589269] ath9k :03:00.0: setting latency timer to 64 [ 30.594884] ath: address test failed addr: 0x8000 - wr:0x != rd:0x2aaa this looks really wrong if the memory test itself fails, then all those REG_READ, REG_WRITES are unreliable and this may be the reason that your gettsf64 looks weird and hits a warning. also did you try what Felix had suggested? Please understand, there are no crashes anymore because it cannot be initialized. -- Best regards, Misha Shnurapet, Fedora Project Contributor Email: shnurapet AT fedoraproject.org, IRC: misha on freenode https://fedoraproject.org/wiki/shnurapet, GPG: 00217306 -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
AR9280 won't initialize
Hi. I have a little problem. I replaced the old BCM4312 card on my Dell mini 1011 (10v) with: 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) But it won't work. First it crashed Linux: http://pastebin.com/YmEGcPK8 Then I installed a system update: http://funkyimg.com/u2/879/849/2.png http://pastebin.com/hWG6u7VJ And now it is: [ 30.589243] ath9k :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 30.589269] ath9k :03:00.0: setting latency timer to 64 [ 30.594884] ath: address test failed addr: 0x8000 - wr:0x != rd:0x2aaa [ 30.594898] ath: Unable to initialize hardware; initialization status: -19 [ 30.594913] ath9k :03:00.0: Failed to initialize device [ 30.594991] ath9k :03:00.0: PCI INT A disabled lsusb: http://pastebin.com/JHYZiDhr Installing the latest stable compat-wireless from source didn't help (bleeding edge won't build). I would appreciate if you help me. -- Best regards, Misha Shnurapet, Fedora Project Contributor Email: shnurapet AT fedoraproject.org, IRC: misha on freenode https://fedoraproject.org/wiki/shnurapet, GPG: 00217306 -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Fwd: AR9280 won't initialize
Sorry, here's the full info. I replaced the old BCM4312 card on my Dell mini 1011 (10v) with: 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) First, ABRT caught a crash: architecture: i686 cmdline:ro root=UUID=ea0937eb-db45-4751-855c-73da5da99448 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet component: kernel kernel: 2.6.38.8-32.fc15.i686 kernel_tainted: 512 os_release: Fedora release 15 (Lovelock) package:kernel reason: WARNING: at drivers/net/wireless/ath/ath9k/hw.c:2242 ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw]() time: Sat Jun 25 13:30:20 2011 backtrace: :WARNING: at drivers/net/wireless/ath/ath9k/hw.c:2242 ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw]() :Hardware name: Inspiron 1011 :Modules linked in: fuse cpufreq_ondemand 8021q garp stp llc acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables arc4 ath9k mac80211 snd_hda_codec_realtek snd_hda_intel ath9k_common ath9k_hw snd_hda_codec ath snd_hwdep cfg80211 snd_seq snd_seq_device dell_laptop uvcvideo compal_laptop dcdbas microcode snd_pcm videodev r8169 joydev rfkill mii snd_timer iTCO_wdt iTCO_vendor_support i2c_i801 snd soundcore snd_page_alloc ipv6 uas usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: scsi_wait_scan] :Pid: 0, comm: swapper Tainted: GW 2.6.38.8-32.fc15.i686 #1 :Call Trace: : [c07ced36] ? printk+0x2d/0x2f : [c043aad9] warn_slowpath_common+0x7c/0x91 : [f889c22e] ? ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw] : [f889c22e] ? ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw] : [c043ab10] warn_slowpath_null+0x22/0x24 : [f889c22e] ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw] : [f930411b] ath_rx_tasklet+0x85/0x1190 [ath9k] : [c073c342] ? netif_receive_skb+0x62/0x68 : [c04d68aa] ? add_partial+0x34/0x3b : [c04d68aa] ? add_partial+0x34/0x3b : [c07d1268] ? __slab_free+0x55/0xa2 : [c04621d0] ? arch_local_irq_save+0x12/0x17 : [f93005c6] ? ath9k_ioread32+0x54/0x5e [ath9k] : [f9302aeb] ath9k_tasklet+0x95/0x102 [ath9k] : [c043f545] tasklet_action+0x6a/0xae : [c043fdc4] __do_softirq+0xa9/0x163 : [c043fd1b] ? __do_softirq+0x0/0x163 : IRQ [c043ff17] ? irq_exit+0x3c/0x70 : [c0404bff] ? do_IRQ+0x7e/0x92 : [c0403770] ? common_interrupt+0x30/0x38 : [c04300e0] ? __sched_setscheduler+0x212/0x2fa : [c060be15] ? intel_idle+0xc0/0xe7 : [c0712ff8] ? cpuidle_idle_call+0xc5/0x136 : [c0401fa0] ? cpu_idle+0x8e/0xa8 : [c07baa15] ? rest_init+0x5d/0x5f : [c0a59816] ? start_kernel+0x357/0x35d : [c0a5920c] ? unknown_bootoption+0x0/0x19e : [c0a590d6] ? i386_start_kernel+0xd6/0xdc event_log: :2011-06-25-13:31:21 Submitting oops report to http://submit.kerneloops.org/submitoops.php :2011-06-25-13:31:22 Kernel oops report was uploaded :2011-06-25-13:31:22 Logging into Bugzilla at https://bugzilla.redhat.com :2011-06-25-13:31:24 Checking for duplicates :2011-06-25-13:31:30 Bug is already reported: 716585 :2011-06-25-13:31:30 Logging out :2011-06-25-13:31:32 Status: NEW https://bugzilla.redhat.com/show_bug.cgi?id=716585 reported_to: :kerneloops: URL=http://submit.kerneloops.org/submitoops.php :Bugzilla: URL=https://bugzilla.redhat.com/show_bug.cgi?id=716585 END: I reported it to the ath9k-devel mailing list. Then I installed a big system update: http://funkyimg.com/u2/879/849/2.png [misha@mini ~]$ ls /etc/yum.repos.d/ atrpms.repo google-chrome.repo rpmfusion-free-updates-testing.repo fedora-rawhide.repo infinality.repo rpmfusion-nonfree-rawhide.repo fedora.repo rpmfusion-free-rawhide.repo rpmfusion-nonfree.repo fedora-updates.repo rpmfusion-free.repo rpmfusion-nonfree-updates.repo fedora-updates-testing.repo rpmfusion-free-updates.repo rpmfusion-nonfree-updates-testing.repo And now I see in dmesg: [ 30.589243] ath9k :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 30.589269] ath9k :03:00.0: setting latency timer to 64 [ 30.594884] ath: address test failed addr: 0x8000 - wr:0x != rd:0x2aaa [ 30.594898] ath: Unable to initialize hardware; initialization status: -19 [ 30.594913] ath9k :03:00.0: Failed to initialize device [ 30.594991] ath9k :03:00.0: PCI INT A disabled [misha@mini ~]$ lsusb -vv Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize064 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice2.06 iManufacturer 3 iProduct2 iSerial 1 bNumConfigurations 1
Re: AR9280 won't initialize
On 06/25/2011 07:08 AM, Misha Shnurapet wrote: [ 30.589243] ath9k :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 30.589269] ath9k :03:00.0: setting latency timer to 64 [ 30.594884] ath: address test failed addr: 0x8000 - wr:0x != rd:0x2aaa [ 30.594898] ath: Unable to initialize hardware; initialization status: -19 [ 30.594913] ath9k :03:00.0: Failed to initialize device [ 30.594991] ath9k :03:00.0: PCI INT A disabled I would open a bug at http://bugzilla.kernel.org Be sure to show your kernel version and attach the stack backtrace. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Re: Fwd: AR9280 won't initialize
On 06/25/2011 07:35 AM, Misha Shnurapet wrote: Sorry, here's the full info. I replaced the old BCM4312 card on my Dell mini 1011 (10v) with: 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) First, ABRT caught a crash: architecture: i686 cmdline:ro root=UUID=ea0937eb-db45-4751-855c-73da5da99448 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet component: kernel kernel: 2.6.38.8-32.fc15.i686 kernel_tainted: 512 os_release: Fedora release 15 (Lovelock) package:kernel reason: WARNING: at drivers/net/wireless/ath/ath9k/hw.c:2242 ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw]() time: Sat Jun 25 13:30:20 2011 backtrace: :WARNING: at drivers/net/wireless/ath/ath9k/hw.c:2242 ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw]() :Hardware name: Inspiron 1011 :Modules linked in: fuse cpufreq_ondemand 8021q garp stp llc acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables arc4 ath9k mac80211 snd_hda_codec_realtek snd_hda_intel ath9k_common ath9k_hw snd_hda_codec ath snd_hwdep cfg80211 snd_seq snd_seq_device dell_laptop uvcvideo compal_laptop dcdbas microcode snd_pcm videodev r8169 joydev rfkill mii snd_timer iTCO_wdt iTCO_vendor_support i2c_i801 snd soundcore snd_page_alloc ipv6 uas usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: scsi_wait_scan] :Pid: 0, comm: swapper Tainted: GW 2.6.38.8-32.fc15.i686 #1 :Call Trace: : [c07ced36] ? printk+0x2d/0x2f : [c043aad9] warn_slowpath_common+0x7c/0x91 : [f889c22e] ? ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw] : [f889c22e] ? ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw] : [c043ab10] warn_slowpath_null+0x22/0x24 : [f889c22e] ath9k_hw_gettsf64+0x75/0x79 [ath9k_hw] : [f930411b] ath_rx_tasklet+0x85/0x1190 [ath9k] : [c073c342] ? netif_receive_skb+0x62/0x68 : [c04d68aa] ? add_partial+0x34/0x3b : [c04d68aa] ? add_partial+0x34/0x3b : [c07d1268] ? __slab_free+0x55/0xa2 : [c04621d0] ? arch_local_irq_save+0x12/0x17 : [f93005c6] ? ath9k_ioread32+0x54/0x5e [ath9k] : [f9302aeb] ath9k_tasklet+0x95/0x102 [ath9k] : [c043f545] tasklet_action+0x6a/0xae : [c043fdc4] __do_softirq+0xa9/0x163 : [c043fd1b] ? __do_softirq+0x0/0x163 :IRQ [c043ff17] ? irq_exit+0x3c/0x70 : [c0404bff] ? do_IRQ+0x7e/0x92 : [c0403770] ? common_interrupt+0x30/0x38 : [c04300e0] ? __sched_setscheduler+0x212/0x2fa : [c060be15] ? intel_idle+0xc0/0xe7 : [c0712ff8] ? cpuidle_idle_call+0xc5/0x136 : [c0401fa0] ? cpu_idle+0x8e/0xa8 : [c07baa15] ? rest_init+0x5d/0x5f : [c0a59816] ? start_kernel+0x357/0x35d : [c0a5920c] ? unknown_bootoption+0x0/0x19e : [c0a590d6] ? i386_start_kernel+0xd6/0xdc event_log: :2011-06-25-13:31:21 Submitting oops report to http://submit.kerneloops.org/submitoops.php :2011-06-25-13:31:22 Kernel oops report was uploaded :2011-06-25-13:31:22 Logging into Bugzilla at https://bugzilla.redhat.com :2011-06-25-13:31:24 Checking for duplicates :2011-06-25-13:31:30 Bug is already reported: 716585 :2011-06-25-13:31:30 Logging out :2011-06-25-13:31:32 Status: NEW https://bugzilla.redhat.com/show_bug.cgi?id=716585 reported_to: :kerneloops: URL=http://submit.kerneloops.org/submitoops.php :Bugzilla: URL=https://bugzilla.redhat.com/show_bug.cgi?id=716585 END: I reported it to the ath9k-devel mailing list. Then I installed a big system update: http://funkyimg.com/u2/879/849/2.png [misha@mini ~]$ ls /etc/yum.repos.d/ atrpms.repo google-chrome.repo rpmfusion-free-updates-testing.repo fedora-rawhide.repo infinality.repo rpmfusion-nonfree-rawhide.repo fedora.repo rpmfusion-free-rawhide.repo rpmfusion-nonfree.repo fedora-updates.repo rpmfusion-free.repo rpmfusion-nonfree-updates.repo fedora-updates-testing.repo rpmfusion-free-updates.repo rpmfusion-nonfree-updates-testing.repo And now I see in dmesg: [ 30.589243] ath9k :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 30.589269] ath9k :03:00.0: setting latency timer to 64 [ 30.594884] ath: address test failed addr: 0x8000 - wr:0x != rd:0x2aaa [ 30.594898] ath: Unable to initialize hardware; initialization status: -19 [ 30.594913] ath9k :03:00.0: Failed to initialize device [ 30.594991] ath9k :03:00.0: PCI INT A disabled [misha@mini ~]$ lsusb -vv Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize064 idVendor 0x1d6b Linux Foundation idProduct
