Re: [one-users] VM Failed with Windows OS
Dear All, Is there any ready to go template / image available for Windows version OS in the market? I am still trying hard to run the Windows 7 OS, but either stays at Blue Screen or says Boot Disk not found. I have tried the suggested work around but seems like I am not able to make up. The same image when booted using qemu or virt-viewer works perfect. Regards, Sudeep On Thu, Jul 10, 2014 at 5:48 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Hi, I tried to install taking inputs from [ http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers ] Tried to install .vdi installation and then convert to qcow2 format. I have checked with usual VirtualBox and virt-install and virt-install --prompt . I did change the IDE to ICH6 but no luck. Then able to create instantiate image, template and VMs and status is Running. But while during VNC image viewer from OpenNebula Sunstone GUI, it still says either: 1. Booting from Hard Disk or 2. Trying to Boot -- No bootable device found It tried to find the boot disk from CD/DVD/Floppy/Network but not found The same disk is working fine from virt-manager and VirtualBox. Regards, Sudeep On Thu, Jul 10, 2014 at 11:03 AM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Valentine, Yes I can boot the VM in my local machine using qemu. Right now I have installed win7 in my virtualbox converted .vdi to .qcow2 format using qemu-utils after that shall try to import the qcow2 file at /var/lib/libvirt/images/ folder and try again. Sudeep On Thu, Jul 10, 2014 at 10:58 AM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, I have never used virt-install but I doubt it install the VirtIO drivers [1] by itself inside the Windows 7 image. Without those drivers the virtio doesn't work inside the machine, in the sense that Windows Installer doesn't see any HDD present. Can you boot the VM on your local machine using qemu? [1]: http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers Best, Valentin On Wed, Jul 9, 2014 at 10:15 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Hello Valentine, I followed the steps in and could install Win7 using virt-install command. Win7 OS gets installed in 7GB HDD and I could see Win7 desktop using virt-manager. Then I power-off the machine and create the image, template VM successfully from oneadmin prompt. But, from vncviewer in OpenNebula GUI, it says, Booting from Hard-Disk. Inside the VM, I am not able to see the desktop! - Following steps I did: 1. [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/win7.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ qemu-img convert -f raw -O qcow2 win7.qcow2 win7.qcow2 [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ chown qemu.qemu win7.qcow2 [oneadmin@front images]$ virt-install --connect qemu:///system --name win7 --ram 1024 --vcpus 2 --disk path=/var/lib/libvirt/images/win7.qcow2,size=8,format=qcow2,bus=virtio,cache=none --cdrom /home/Windows-7-x86.iso --vnc --os-type=windows --os-variant=win7 -noautoconsole --accelerate --noapic --keymap=en-us Finally, [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm1 runn0512M nc1 11d 16h14 Regards, Sudeep On Tue, Jul 8, 2014 at 9:13 PM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, Note that virt-install doesn't care that your image is already created, it overwrites it and changes the format to raw. Take a look over this article [1], on how to pass the format of the image to virt-install. Or just qemu-img convert your raw image to qcow2. [1]: http://opennodecloud.com/documentation/howtos/kvm-guests-virt-install-examples/ Best, Valentin On Tue, Jul 8, 2014 at 6:24 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info
Re: [one-users] VM Failed with Windows OS
Hi, I tried to install taking inputs from [ http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers ] Tried to install .vdi installation and then convert to qcow2 format. I have checked with usual VirtualBox and virt-install and virt-install --prompt . I did change the IDE to ICH6 but no luck. Then able to create instantiate image, template and VMs and status is Running. But while during VNC image viewer from OpenNebula Sunstone GUI, it still says either: 1. Booting from Hard Disk or 2. Trying to Boot -- No bootable device found It tried to find the boot disk from CD/DVD/Floppy/Network but not found The same disk is working fine from virt-manager and VirtualBox. Regards, Sudeep On Thu, Jul 10, 2014 at 11:03 AM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Valentine, Yes I can boot the VM in my local machine using qemu. Right now I have installed win7 in my virtualbox converted .vdi to .qcow2 format using qemu-utils after that shall try to import the qcow2 file at /var/lib/libvirt/images/ folder and try again. Sudeep On Thu, Jul 10, 2014 at 10:58 AM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, I have never used virt-install but I doubt it install the VirtIO drivers [1] by itself inside the Windows 7 image. Without those drivers the virtio doesn't work inside the machine, in the sense that Windows Installer doesn't see any HDD present. Can you boot the VM on your local machine using qemu? [1]: http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers Best, Valentin On Wed, Jul 9, 2014 at 10:15 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Hello Valentine, I followed the steps in and could install Win7 using virt-install command. Win7 OS gets installed in 7GB HDD and I could see Win7 desktop using virt-manager. Then I power-off the machine and create the image, template VM successfully from oneadmin prompt. But, from vncviewer in OpenNebula GUI, it says, Booting from Hard-Disk. Inside the VM, I am not able to see the desktop! - Following steps I did: 1. [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/win7.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ qemu-img convert -f raw -O qcow2 win7.qcow2 win7.qcow2 [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ chown qemu.qemu win7.qcow2 [oneadmin@front images]$ virt-install --connect qemu:///system --name win7 --ram 1024 --vcpus 2 --disk path=/var/lib/libvirt/images/win7.qcow2,size=8,format=qcow2,bus=virtio,cache=none --cdrom /home/Windows-7-x86.iso --vnc --os-type=windows --os-variant=win7 -noautoconsole --accelerate --noapic --keymap=en-us Finally, [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm1 runn0512M nc1 11d 16h14 Regards, Sudeep On Tue, Jul 8, 2014 at 9:13 PM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, Note that virt-install doesn't care that your image is already created, it overwrites it and changes the format to raw. Take a look over this article [1], on how to pass the format of the image to virt-install. Or just qemu-img convert your raw image to qcow2. [1]: http://opennodecloud.com/documentation/howtos/kvm-guests-virt-install-examples/ Best, Valentin On Tue, Jul 8, 2014 at 6:24 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info /var/lib/libvirt/images/win7.qcow2 image: /var/lib/libvirt/images/win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 4.9G So, how to fix it?!? I have been trying to make a VM in windows for past 10days but still not able to make it! :-( Regards, Sudeep On Tue, Jul 8, 2014 at 8:45 PM, Javier Fontan jfon...@opennebula.org wrote: I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2
Re: [one-users] VM Failed with Windows OS
Hello Valentine, I followed the steps in and could install Win7 using virt-install command. Win7 OS gets installed in 7GB HDD and I could see Win7 desktop using virt-manager. Then I power-off the machine and create the image, template VM successfully from oneadmin prompt. But, from vncviewer in OpenNebula GUI, it says, Booting from Hard-Disk. Inside the VM, I am not able to see the desktop! - Following steps I did: 1. [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/win7.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ qemu-img convert -f raw -O qcow2 win7.qcow2 win7.qcow2 [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ chown qemu.qemu win7.qcow2 [oneadmin@front images]$ virt-install --connect qemu:///system --name win7 --ram 1024 --vcpus 2 --disk path=/var/lib/libvirt/images/win7.qcow2,size=8,format=qcow2,bus=virtio,cache=none --cdrom /home/Windows-7-x86.iso --vnc --os-type=windows --os-variant=win7 -noautoconsole --accelerate --noapic --keymap=en-us Finally, [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm1 runn0512M nc1 11d 16h14 Regards, Sudeep On Tue, Jul 8, 2014 at 9:13 PM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, Note that virt-install doesn't care that your image is already created, it overwrites it and changes the format to raw. Take a look over this article [1], on how to pass the format of the image to virt-install. Or just qemu-img convert your raw image to qcow2. [1]: http://opennodecloud.com/documentation/howtos/kvm-guests-virt-install-examples/ Best, Valentin On Tue, Jul 8, 2014 at 6:24 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info /var/lib/libvirt/images/win7.qcow2 image: /var/lib/libvirt/images/win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 4.9G So, how to fix it?!? I have been trying to make a VM in windows for past 10days but still not able to make it! :-( Regards, Sudeep On Tue, Jul 8, 2014 at 8:45 PM, Javier Fontan jfon...@opennebula.org wrote: I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2 On Tue, Jul 8, 2014 at 4:16 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like the disk (/var/lib/libvirt/images/win7.qcow2) to be (in gigabytes)? 8 What is the install CD-ROM/ISO or URL? /home/Windows-7-x86.iso Starting install... Allocating 'win7.qcow2' | 8.0 GB 00:00 Creating domain... |0 B 00:00 (virt-viewer:24972): virt-viewer-DEBUG: Couldn't load configuration: File is empty [oneadmin@front ~]$ oneimage create --name win7-x86_64 --path /var/lib/libvirt/images/win7.qcow2 --driver qcow2 --datastore default ID: 12 [oneadmin@front ~]$ oneimage list ID USER GROUP
Re: [one-users] VM Failed with Windows OS
Hello Sudeep, I have never used virt-install but I doubt it install the VirtIO drivers [1] by itself inside the Windows 7 image. Without those drivers the virtio doesn't work inside the machine, in the sense that Windows Installer doesn't see any HDD present. Can you boot the VM on your local machine using qemu? [1]: http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers Best, Valentin On Wed, Jul 9, 2014 at 10:15 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Hello Valentine, I followed the steps in and could install Win7 using virt-install command. Win7 OS gets installed in 7GB HDD and I could see Win7 desktop using virt-manager. Then I power-off the machine and create the image, template VM successfully from oneadmin prompt. But, from vncviewer in OpenNebula GUI, it says, Booting from Hard-Disk. Inside the VM, I am not able to see the desktop! - Following steps I did: 1. [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/win7.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ qemu-img convert -f raw -O qcow2 win7.qcow2 win7.qcow2 [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ chown qemu.qemu win7.qcow2 [oneadmin@front images]$ virt-install --connect qemu:///system --name win7 --ram 1024 --vcpus 2 --disk path=/var/lib/libvirt/images/win7.qcow2,size=8,format=qcow2,bus=virtio,cache=none --cdrom /home/Windows-7-x86.iso --vnc --os-type=windows --os-variant=win7 -noautoconsole --accelerate --noapic --keymap=en-us Finally, [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm1 runn0512M nc1 11d 16h14 Regards, Sudeep On Tue, Jul 8, 2014 at 9:13 PM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, Note that virt-install doesn't care that your image is already created, it overwrites it and changes the format to raw. Take a look over this article [1], on how to pass the format of the image to virt-install. Or just qemu-img convert your raw image to qcow2. [1]: http://opennodecloud.com/documentation/howtos/kvm-guests-virt-install-examples/ Best, Valentin On Tue, Jul 8, 2014 at 6:24 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info /var/lib/libvirt/images/win7.qcow2 image: /var/lib/libvirt/images/win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 4.9G So, how to fix it?!? I have been trying to make a VM in windows for past 10days but still not able to make it! :-( Regards, Sudeep On Tue, Jul 8, 2014 at 8:45 PM, Javier Fontan jfon...@opennebula.org wrote: I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2 On Tue, Jul 8, 2014 at 4:16 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like
Re: [one-users] VM Failed with Windows OS
Dear Valentine, Yes I can boot the VM in my local machine using qemu. Right now I have installed win7 in my virtualbox converted .vdi to .qcow2 format using qemu-utils after that shall try to import the qcow2 file at /var/lib/libvirt/images/ folder and try again. Sudeep On Thu, Jul 10, 2014 at 10:58 AM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, I have never used virt-install but I doubt it install the VirtIO drivers [1] by itself inside the Windows 7 image. Without those drivers the virtio doesn't work inside the machine, in the sense that Windows Installer doesn't see any HDD present. Can you boot the VM on your local machine using qemu? [1]: http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers Best, Valentin On Wed, Jul 9, 2014 at 10:15 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Hello Valentine, I followed the steps in and could install Win7 using virt-install command. Win7 OS gets installed in 7GB HDD and I could see Win7 desktop using virt-manager. Then I power-off the machine and create the image, template VM successfully from oneadmin prompt. But, from vncviewer in OpenNebula GUI, it says, Booting from Hard-Disk. Inside the VM, I am not able to see the desktop! - Following steps I did: 1. [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/win7.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ qemu-img convert -f raw -O qcow2 win7.qcow2 win7.qcow2 [oneadmin@front images]$ qemu-img info win7.qcow2 image: win7.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 392K cluster_size: 65536 [oneadmin@front images]$ chown qemu.qemu win7.qcow2 [oneadmin@front images]$ virt-install --connect qemu:///system --name win7 --ram 1024 --vcpus 2 --disk path=/var/lib/libvirt/images/win7.qcow2,size=8,format=qcow2,bus=virtio,cache=none --cdrom /home/Windows-7-x86.iso --vnc --os-type=windows --os-variant=win7 -noautoconsole --accelerate --noapic --keymap=en-us Finally, [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm1 runn0512M nc1 11d 16h14 Regards, Sudeep On Tue, Jul 8, 2014 at 9:13 PM, Valentin Bud valentin@gmail.com wrote: Hello Sudeep, Note that virt-install doesn't care that your image is already created, it overwrites it and changes the format to raw. Take a look over this article [1], on how to pass the format of the image to virt-install. Or just qemu-img convert your raw image to qcow2. [1]: http://opennodecloud.com/documentation/howtos/kvm-guests-virt-install-examples/ Best, Valentin On Tue, Jul 8, 2014 at 6:24 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info /var/lib/libvirt/images/win7.qcow2 image: /var/lib/libvirt/images/win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 4.9G So, how to fix it?!? I have been trying to make a VM in windows for past 10days but still not able to make it! :-( Regards, Sudeep On Tue, Jul 8, 2014 at 8:45 PM, Javier Fontan jfon...@opennebula.org wrote: I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2 On Tue, Jul 8, 2014 at 4:16 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G
[one-users] VM Failed with Windows OS
Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like the disk (/var/lib/libvirt/images/win7.qcow2) to be (in gigabytes)? 8 What is the install CD-ROM/ISO or URL? /home/Windows-7-x86.iso Starting install... Allocating 'win7.qcow2' | 8.0 GB 00:00 Creating domain... |0 B 00:00 (virt-viewer:24972): virt-viewer-DEBUG: Couldn't load configuration: File is empty [oneadmin@front ~]$ oneimage create --name win7-x86_64 --path /var/lib/libvirt/images/win7.qcow2 --driver qcow2 --datastore default ID: 12 [oneadmin@front ~]$ oneimage list ID USER GROUP NAMEDATASTORE SIZE TYPE PER STAT RVMS 3 oneadmin oneadmin Ubuntu-14.04_x8 default 287M OSNo used1 12 oneadmin oneadmin win7-x86_64 default 8G OSNo rdy 0 [oneadmin@front ~]$ onetemplate create --name win7 --cpu 1 --vcpu 1 --memory 512 --arch x86_64 --disk win7-x86_64 --nic private --vnc --ssh ID: 11 [oneadmin@front ~]$ onetemplate list ID USERGROUP NAME REGTIME 2 oneadminoneadminUbuntu-14.04 06/27 02:11:28 11 oneadminoneadminwin7 07/08 18:30:39 [oneadmin@front ~]$ onetemplate instantiate win7 --name myvm8 VM ID: 36 [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm2 runn0512M nc1 11d 16h14 36 oneadmin oneadmin myvm8 fail0 0K 0d 00h00 ERROR from log file. [oneadmin@front ~]$ tail -f /var/log/one/36.log Tue Jul 8 18:31:48 2014 [DiM][I]: New VM state is ACTIVE. Tue Jul 8 18:31:48 2014 [LCM][I]: New VM state is PROLOG. Tue Jul 8 18:35:30 2014 [LCM][I]: New VM state is BOOT Tue Jul 8 18:35:30 2014 [VMM][I]: Generating deployment file: /var/lib/one/vms/36/deployment.0 Tue Jul 8 18:35:31 2014 [VMM][I]: ExitCode: 0 Tue Jul 8 18:35:31 2014 [VMM][I]: Successfully execute network driver operation: pre. Tue Jul 8 18:35:32 2014 [VMM][I]: Command execution fail: cat EOT | /var/tmp/one/vmm/kvm/deploy '/var/lib/one/datastores/0/36/deployment.0' 'nc1' 36 nc1 Tue Jul 8 18:35:32 2014 [VMM][I]: error: Failed to create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: error: internal error process exited while connecting to monitor: qemu-kvm: -drive file=/var/lib/one/datastores/0/36/disk.0,if=none,id=drive-ide0-0-0,format=qcow2: could not open disk image /var/lib/one/datastores/0/36/disk.0: Invalid argument Tue Jul 8 18:35:32 2014 [VMM][I]: Tue Jul 8 18:35:32 2014 [VMM][E]: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: ExitCode: 255 Tue Jul 8 18:35:32 2014 [VMM][I]: Failed to execute virtualization driver operation: deploy. Tue Jul 8 18:35:32 2014 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:33 2014 [DiM][I]: New VM state is FAILED -- Thanks Regards, Sudeep Narayan Banerjee ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] VM Failed with Windows OS
The errors that you are pointing out, don't seem to have any direct connection to the fact that you are trying to install a windows VM, there is nothing windows-specific about them. Looks like OpenNebula failed to clone the blank windows image to the system datastore due to some permissions issue. Steve Timm On Tue, 8 Jul 2014, Sudeep Narayan Banerjee wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce -- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like the disk (/var/lib/libvirt/images/win7.qcow2) to be (in gigabytes)? 8 What is the install CD-ROM/ISO or URL? /home/Windows-7-x86.iso Starting install... Allocating'win7.qcow2' ?? ? | 8.0 GB 00:00 Creatingdomain... ?? ? | 0 B 00:00 (virt-viewer:24972): virt-viewer-DEBUG: Couldn't load configuration: File is empty [oneadmin@front ~]$ oneimage create --name win7-x86_64 --path /var/lib/libvirt/images/win7.qcow2 --driver qcow2 --datastore default ID: 12 [oneadmin@front ~]$ oneimage list ID USER GROUP NAME DATASTORE SIZE TYPE PER STAT RVMS 3 oneadmin oneadmin Ubuntu-14.04_x8 default 287M OS No used 1 12 oneadmin oneadmin win7-x86_64 default 8G OS No rdy 0 [oneadmin@front ~]$ onetemplate create --name win7 --cpu 1 --vcpu 1 --memory 512 --arch x86_64 --disk win7-x86_64 --nic private --vnc --ssh ID: 11 [oneadmin@front ~]$ onetemplate list ID USER GROUP NAME REGTIME 2 oneadmin oneadmin Ubuntu-14.04 06/27 02:11:28 11 oneadmin oneadmin win7 07/08 18:30:39 [oneadmin@front ~]$ onetemplate instantiate win7 --name myvm8 VM ID: 36 [oneadmin@front ~]$ onevm list ID USER GROUP NAME STAT UCPU UMEM HOST TIME 25 oneadmin oneadmin myvm2 runn 0 512M nc1 11d 16h14 36 oneadmin oneadmin myvm8 fail 0 0K 0d 00h00 ERROR from log file. [oneadmin@front ~]$ tail -f /var/log/one/36.log Tue Jul 8 18:31:48 2014 [DiM][I]: New VM state is ACTIVE. Tue Jul 8 18:31:48 2014 [LCM][I]: New VM state is PROLOG. Tue Jul 8 18:35:30 2014 [LCM][I]: New VM state is BOOT Tue Jul 8 18:35:30 2014 [VMM][I]: Generating deployment file: /var/lib/one/vms/36/deployment.0 Tue Jul 8 18:35:31 2014 [VMM][I]: ExitCode: 0 Tue Jul 8 18:35:31 2014 [VMM][I]: Successfully execute network driver operation: pre. Tue Jul 8 18:35:32 2014 [VMM][I]: Command execution fail: cat EOT | /var/tmp/one/vmm/kvm/deploy '/var/lib/one/datastores/0/36/deployment.0' 'nc1' 36 nc1 Tue Jul 8 18:35:32 2014 [VMM][I]: error: Failed to create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: error: internal error process exited while connecting to monitor: qemu-kvm: -drivefile=/var/lib/one/datastores/0/36/disk.0,if=none,id=drive-ide0-0-0,format=q cow2: could not open disk image /var/lib/one/datastores/0/36/disk.0: Invalid argument Tue Jul 8 18:35:32 2014 [VMM][I]: Tue Jul 8 18:35:32 2014 [VMM][E]: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: ExitCode: 255 Tue Jul 8 18:35:32 2014 [VMM][I]: Failed to execute virtualization driver operation: deploy. Tue Jul 8 18:35:32 2014 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:33 2014 [DiM][I]: New VM state is FAILED -- Thanks Regards,Sudeep Narayan Banerjee -- Steven C. Timm, Ph.D (630) 840-8525 t...@fnal.gov http://home.fnal.gov/~timm/ Fermilab Scientific Computing Division, Scientific Computing Services Quad. Grid and Cloud Services Dept., Associate Dept. Head for Cloud
Re: [one-users] VM Failed with Windows OS
I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2 On Tue, Jul 8, 2014 at 4:16 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like the disk (/var/lib/libvirt/images/win7.qcow2) to be (in gigabytes)? 8 What is the install CD-ROM/ISO or URL? /home/Windows-7-x86.iso Starting install... Allocating 'win7.qcow2' | 8.0 GB 00:00 Creating domain... |0 B 00:00 (virt-viewer:24972): virt-viewer-DEBUG: Couldn't load configuration: File is empty [oneadmin@front ~]$ oneimage create --name win7-x86_64 --path /var/lib/libvirt/images/win7.qcow2 --driver qcow2 --datastore default ID: 12 [oneadmin@front ~]$ oneimage list ID USER GROUP NAMEDATASTORE SIZE TYPE PER STAT RVMS 3 oneadmin oneadmin Ubuntu-14.04_x8 default 287M OSNo used 1 12 oneadmin oneadmin win7-x86_64 default 8G OSNo rdy 0 [oneadmin@front ~]$ onetemplate create --name win7 --cpu 1 --vcpu 1 --memory 512 --arch x86_64 --disk win7-x86_64 --nic private --vnc --ssh ID: 11 [oneadmin@front ~]$ onetemplate list ID USERGROUP NAME REGTIME 2 oneadminoneadminUbuntu-14.04 06/27 02:11:28 11 oneadminoneadminwin7 07/08 18:30:39 [oneadmin@front ~]$ onetemplate instantiate win7 --name myvm8 VM ID: 36 [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm2 runn0512M nc1 11d 16h14 36 oneadmin oneadmin myvm8 fail0 0K 0d 00h00 ERROR from log file. [oneadmin@front ~]$ tail -f /var/log/one/36.log Tue Jul 8 18:31:48 2014 [DiM][I]: New VM state is ACTIVE. Tue Jul 8 18:31:48 2014 [LCM][I]: New VM state is PROLOG. Tue Jul 8 18:35:30 2014 [LCM][I]: New VM state is BOOT Tue Jul 8 18:35:30 2014 [VMM][I]: Generating deployment file: /var/lib/one/vms/36/deployment.0 Tue Jul 8 18:35:31 2014 [VMM][I]: ExitCode: 0 Tue Jul 8 18:35:31 2014 [VMM][I]: Successfully execute network driver operation: pre. Tue Jul 8 18:35:32 2014 [VMM][I]: Command execution fail: cat EOT | /var/tmp/one/vmm/kvm/deploy '/var/lib/one/datastores/0/36/deployment.0' 'nc1' 36 nc1 Tue Jul 8 18:35:32 2014 [VMM][I]: error: Failed to create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: error: internal error process exited while connecting to monitor: qemu-kvm: -drive file=/var/lib/one/datastores/0/36/disk.0,if=none,id=drive-ide0-0-0,format=qcow2: could not open disk image /var/lib/one/datastores/0/36/disk.0: Invalid argument Tue Jul 8 18:35:32 2014 [VMM][I]: Tue Jul 8 18:35:32 2014 [VMM][E]: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: ExitCode: 255 Tue Jul 8 18:35:32 2014 [VMM][I]: Failed to execute virtualization driver operation: deploy. Tue Jul 8 18:35:32 2014 [VMM][E]: Error deploying virtual machine: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:33 2014 [DiM][I]: New VM state is FAILED -- Thanks Regards, Sudeep Narayan Banerjee ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org -- Javier Fontán Muiños Developer OpenNebula - Flexible Enterprise Cloud Made Simple www.OpenNebula.org | @OpenNebula | github.com/jfontan ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] VM Failed with Windows OS
Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info /var/lib/libvirt/images/win7.qcow2 image: /var/lib/libvirt/images/win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 4.9G So, how to fix it?!? I have been trying to make a VM in windows for past 10days but still not able to make it! :-( Regards, Sudeep On Tue, Jul 8, 2014 at 8:45 PM, Javier Fontan jfon...@opennebula.org wrote: I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2 On Tue, Jul 8, 2014 at 4:16 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like the disk (/var/lib/libvirt/images/win7.qcow2) to be (in gigabytes)? 8 What is the install CD-ROM/ISO or URL? /home/Windows-7-x86.iso Starting install... Allocating 'win7.qcow2' | 8.0 GB 00:00 Creating domain... |0 B 00:00 (virt-viewer:24972): virt-viewer-DEBUG: Couldn't load configuration: File is empty [oneadmin@front ~]$ oneimage create --name win7-x86_64 --path /var/lib/libvirt/images/win7.qcow2 --driver qcow2 --datastore default ID: 12 [oneadmin@front ~]$ oneimage list ID USER GROUP NAMEDATASTORE SIZE TYPE PER STAT RVMS 3 oneadmin oneadmin Ubuntu-14.04_x8 default 287M OSNo used 1 12 oneadmin oneadmin win7-x86_64 default 8G OSNo rdy 0 [oneadmin@front ~]$ onetemplate create --name win7 --cpu 1 --vcpu 1 --memory 512 --arch x86_64 --disk win7-x86_64 --nic private --vnc --ssh ID: 11 [oneadmin@front ~]$ onetemplate list ID USERGROUP NAME REGTIME 2 oneadminoneadminUbuntu-14.04 06/27 02:11:28 11 oneadminoneadminwin7 07/08 18:30:39 [oneadmin@front ~]$ onetemplate instantiate win7 --name myvm8 VM ID: 36 [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm2 runn0512M nc1 11d 16h14 36 oneadmin oneadmin myvm8 fail0 0K 0d 00h00 ERROR from log file. [oneadmin@front ~]$ tail -f /var/log/one/36.log Tue Jul 8 18:31:48 2014 [DiM][I]: New VM state is ACTIVE. Tue Jul 8 18:31:48 2014 [LCM][I]: New VM state is PROLOG. Tue Jul 8 18:35:30 2014 [LCM][I]: New VM state is BOOT Tue Jul 8 18:35:30 2014 [VMM][I]: Generating deployment file: /var/lib/one/vms/36/deployment.0 Tue Jul 8 18:35:31 2014 [VMM][I]: ExitCode: 0 Tue Jul 8 18:35:31 2014 [VMM][I]: Successfully execute network driver operation: pre. Tue Jul 8 18:35:32 2014 [VMM][I]: Command execution fail: cat EOT | /var/tmp/one/vmm/kvm/deploy '/var/lib/one/datastores/0/36/deployment.0' 'nc1' 36 nc1 Tue Jul 8 18:35:32 2014 [VMM][I]: error: Failed to create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: error: internal error process exited while connecting to monitor: qemu-kvm: -drive file=/var/lib/one/datastores/0/36/disk.0,if=none,id=drive-ide0-0-0,format=qcow2: could not open disk image /var/lib/one/datastores/0/36/disk.0: Invalid argument Tue Jul 8 18:35:32 2014 [VMM][I]: Tue Jul 8 18:35:32 2014 [VMM][E]: Could not create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: ExitCode: 255 Tue Jul 8 18:35:32 2014 [VMM][I]: Failed to execute virtualization driver operation: deploy. Tue Jul 8
Re: [one-users] VM Failed with Windows OS
Hello Sudeep, Note that virt-install doesn't care that your image is already created, it overwrites it and changes the format to raw. Take a look over this article [1], on how to pass the format of the image to virt-install. Or just qemu-img convert your raw image to qcow2. [1]: http://opennodecloud.com/documentation/howtos/kvm-guests-virt-install-examples/ Best, Valentin On Tue, Jul 8, 2014 at 6:24 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Javier, You are true. It is raw indeed. But I made it like qcow2! Below is the command I executed for qcow2. [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/ winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ qemu-img info /var/lib/libvirt/images/win7.qcow2 image: /var/lib/libvirt/images/win7.qcow2 file format: raw virtual size: 8.0G (8589934592 bytes) disk size: 4.9G So, how to fix it?!? I have been trying to make a VM in windows for past 10days but still not able to make it! :-( Regards, Sudeep On Tue, Jul 8, 2014 at 8:45 PM, Javier Fontan jfon...@opennebula.org wrote: I believe that the image is not a qcow2 image but raw. You can check the format with: $ qemu-img info /var/lib/libvirt/images/win7.qcow2 On Tue, Jul 8, 2014 at 4:16 PM, Sudeep Narayan Banerjee snbaner...@iitgn.ac.in wrote: Dear Sir, I have been trying to install Windows-7 64bit in OpenNebula. Our target is to create a VM with Windows as OS. Below are the steps that I followed. But not able to runn the VM. SeLinux is Disabled in both servers. [root@front ~]# getenforce-- Frontend Disabled [root@nc1 ~]# getenforce -- Worker Node Disabled [oneadmin@front ~]$ cd /var/lib/libvirt/images/ [oneadmin@front images]$ qemu-img create -f qcow2 -o preallocation=metadata /storage/local/images/winserv1.qcow2 8G Formatting '/var/lib/libvirt/images/win7.qow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 preallocation='metadata' [oneadmin@front images]$ ls -lrth total 5.0G -rw--- 1 oneadmin oneadmin 8.0G Jul 8 18:23 win7.qcow2 [oneadmin@front images]$ exit [root@front ~]# virt-install --prompt What is the name of your virtual machine? myvm7 How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /var/lib/libvirt/images/win7.qcow2 How large would you like the disk (/var/lib/libvirt/images/win7.qcow2) to be (in gigabytes)? 8 What is the install CD-ROM/ISO or URL? /home/Windows-7-x86.iso Starting install... Allocating 'win7.qcow2' | 8.0 GB 00:00 Creating domain... |0 B 00:00 (virt-viewer:24972): virt-viewer-DEBUG: Couldn't load configuration: File is empty [oneadmin@front ~]$ oneimage create --name win7-x86_64 --path /var/lib/libvirt/images/win7.qcow2 --driver qcow2 --datastore default ID: 12 [oneadmin@front ~]$ oneimage list ID USER GROUP NAMEDATASTORE SIZE TYPE PER STAT RVMS 3 oneadmin oneadmin Ubuntu-14.04_x8 default 287M OSNo used 1 12 oneadmin oneadmin win7-x86_64 default 8G OSNo rdy 0 [oneadmin@front ~]$ onetemplate create --name win7 --cpu 1 --vcpu 1 --memory 512 --arch x86_64 --disk win7-x86_64 --nic private --vnc --ssh ID: 11 [oneadmin@front ~]$ onetemplate list ID USERGROUP NAME REGTIME 2 oneadminoneadminUbuntu-14.04 06/27 02:11:28 11 oneadminoneadminwin7 07/08 18:30:39 [oneadmin@front ~]$ onetemplate instantiate win7 --name myvm8 VM ID: 36 [oneadmin@front ~]$ onevm list ID USER GROUPNAMESTAT UCPUUMEM HOST TIME 25 oneadmin oneadmin myvm2 runn0512M nc1 11d 16h14 36 oneadmin oneadmin myvm8 fail0 0K 0d 00h00 ERROR from log file. [oneadmin@front ~]$ tail -f /var/log/one/36.log Tue Jul 8 18:31:48 2014 [DiM][I]: New VM state is ACTIVE. Tue Jul 8 18:31:48 2014 [LCM][I]: New VM state is PROLOG. Tue Jul 8 18:35:30 2014 [LCM][I]: New VM state is BOOT Tue Jul 8 18:35:30 2014 [VMM][I]: Generating deployment file: /var/lib/one/vms/36/deployment.0 Tue Jul 8 18:35:31 2014 [VMM][I]: ExitCode: 0 Tue Jul 8 18:35:31 2014 [VMM][I]: Successfully execute network driver operation: pre. Tue Jul 8 18:35:32 2014 [VMM][I]: Command execution fail: cat EOT | /var/tmp/one/vmm/kvm/deploy '/var/lib/one/datastores/0/36/deployment.0' 'nc1' 36 nc1 Tue Jul 8 18:35:32 2014 [VMM][I]: error: Failed to create domain from /var/lib/one/datastores/0/36/deployment.0 Tue Jul 8 18:35:32 2014 [VMM][I]: error: internal error process exited while connecting to monitor: