Hi Víctor,
You have to take care of 2 things:
1) signaling - for this you opensips should only do double RR to record
the change of interface (in on priv IP and out on pub IP) - to have
this, before pushing out the call to asterisk, do
force_send_socket(pub_IP), so that a different interface will be
selected as outbound.
For contact you do not have to do nothing.
2) media - insert RTPproxy which must be configured in bridging mode (to
use 2 interfaces). And according to SIP traffic, you need to use the "e"
or "i" flags (when invoking RTPproxy from script) in order to choose the
proper IP for media. Like for INVITE (going from priv to pub) instruct
RTPP to use the pub interface, for the 200 ok reply, need to use the
priv interface.
Regards,
Bogdan
On 04/03/2012 04:31 PM, Víctor Fernández Martínez wrote:
Hi! I'm trying to set up OpenSIPS in a router with 2 NICs that performs a
dynamic NAT. It will receive requests from the UACs on eth0 (NIC behind NAT)
and should forward them through eth1 (public NIC) to an Asterisk outside of
the NAT. I'm not allowed to configure the Asterisk. I have also configured
rtpproxy and would like to use it in order to traverse the NAT. I have
openSIPS listening on both NICs, so the UACs inside of the NAT connect
directly to the socket of openSIPS in eth0.
The question is: I have tried to use fix_nated_contact() and fix_nated_sdp() but
they don't actually change the source IP, so I get no RTP traffic. Seems like
openSIPS doesn't realise there is a NAT, since it receives the requests
directly through its socket in the LAN. So when I use
rewritehostport("IP_OF_ASTERISK"), Asterisk is getting the LAN IPs instead of
the IP of eth1, which is the public IP. I'm using force_send_socket() to force
openSIPS to send the SIP messages to Asterisk through eth1. Is there some way
to fix the IPs so Asterisk gets the public IP (eth1)?
Thank you very much in advance.
Barracuda Networks AG
Vorsitzender des Aufsichtsrates/ Chairman of the supervisory board: Dean Drako
Vorstand/ Executive Board: Dr. Wieland Alge, Mag. Guenter Klausner
Sitz der Gesellschaft/ Registered office: 6020 Innsbruck, Austria
Handelsgericht Innsbruck Firmenbuch/ Registration Number: 184392s
UID-Nr/ VAT Number: ATU47509003
Diese Nachricht und allfaellige angehaengte Dokumente sind vertraulich und nur
fuer den/die Adressaten bestimmt. Sollten Sie nicht der beabsichtigte Adressat
sein, ist jede Offenlegung, Weiterleitung oder sonstige Verwendung dieser
Information nicht gestattet. In diesem Fall bitten wir, den Absender zu
verstaendigen und die Information zu vernichten. Fuer Uebermittlungsfehler oder
sonstige Irrtuemer bei Uebermittlung besteht keine Haftung.
This message and any attached files are confidential and intended solely for
the addressee(s). Any publication, transmission or other use of the information
by a person or entity other than the intended addressee is prohibited. If you
receive this in error please contact the sender and delete the material. The
sender does not accept liability for any errors or omissions as a result of the
transmission.
'Like' us on Facebook for exclusive content and other resources on all
Barracuda Networks solutions.
Visit http://barracudanetworks.com/facebook
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
--
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
