subject:"\[OpenSIPS\-Users\] Need some help in clusterer table and its use in opensips 3.2 ."

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

2022-05-17 Thread Răzvan Crainea

No, there is no setting to identify a node based on cluster_id + 
node_id. Only the node_id is the identifier, so if you are using 
different servers, you should be using different node ids.


Best regards,

Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 5/17/22 12:43, Sasmita Panda wrote:

Hi,

I am using location clustering .

Only the location table data is getting synched in the cluster .

My concern is , when I am saving the node information in clusterer table 
, is there a way I can define the cluster ID in config ?
So , if I have 2 different clusterer then my node could identify itself 
through cluster_id and node_id combination .



In opensips 2.2 , there is a parameter cluster_id to set in config . But 
in 3.2 this parameter is not present .



*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/


On Tue, May 17, 2022 at 1:32 PM Răzvan Crainea > wrote:


Hi, Sasmita!

I don't fully understand your use case - you said it is using node 1 in
cluster 1 - it is using it for what?
A cluster is used for a specific replication feature (i.e. dialog
replication, ratelimit pipes replication). When you specify you want to
do a specific replication, that's where you specify the cluster (i.e.
dialog replication [1]). So what kind of replication feature are you
using, that is not properly identifying the nodes?

[1]

https://opensips.org/docs/modules/3.2.x/dialog.html#param_dialog_replication_cluster



Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com 

On 5/12/22 11:43, Sasmita Panda wrote:
 > Hi ,
 >
 > my_node_id parameter is to define that particular node id . But
how will
 > I define the cluster_id parameter? I want to differentiate both
clusters .
 > I have added my_node_id parameter already . But by default its
looking
 > for cluster_id:1 . But in the database I have defined cluster_id :2 .
 >
 > modparam("clusterer", "my_node_id", 1)
 >
 > How will I associate the database and config ?
 >
 > */Thanks & Regards/*
 > /Sasmita Panda/
 > /Senior Network Testing and Software Engineer/
 > /3CLogic , ph:07827611765/
 >
 >
 > On Thu, May 12, 2022 at 1:20 PM Chester Lee mailto:ches...@zigbang.com>
 > >> wrote:
 >
 >     Hi,
 >
 >     You can specify cluster id in the config. please refer to
 >
https://opensips.org/docs/modules/3.2.x/clusterer.html#param_my_node_id

 >   
  >

 >
 >     I hope this helps.
 >
 >     Regards
 >     Chester
 >
 >
 >     2022년 5월 12일 (목) 오후 4:06, Sasmita Panda
mailto:spa...@3clogic.com>
 >     >>님이
작성:
 >
 >         Hi All ,
 >
 >         I have 2 opesips cluster each cluster has 2 opensips node . I
 >         want to define all the cluster node information in a single
 >         opensips database .
 >
 >         My clusterer table looks like below .
 >
 >   
  +++-+---+---+-+--+--+---++

 >         | id | cluster_id | node_id | url                   | state |
 >         no_ping_retries | priority | sip_addr | flags |
description    |
 >   
  +++-+---+---+-+--+--+---++

 >         |  1 |          1 |       1 | bin:1.1.1.1:

 >         > |     1 |
           3 |       50 |

 >         NULL     | seed  | Node A         |
 >         |  2 |          1 |       2 | bin:2.2.2.2:

 >         >  |     1 |  
             3 |       50 |

 >         NULL     | seed  | Node B         |
 >         |  3 |          2 |       1 | bin:3.3.3.3:

 >         > |     1 |
           3 |       50 |

 >         NULL     | NULL  | cluster2 Node1 |
 >         |  4 |          2 |       2 | bin:4.4.4.4:

 >         > |     1 |
           3 |       50 |

 >         NULL     | NULL  |

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

2022-05-17 Thread Sasmita Panda

Hi,

I am using location clustering .

Only the location table data is getting synched in the cluster .

My concern is , when I am saving the node information in clusterer table ,
is there a way I can define the cluster ID in config ?
So , if I have 2 different clusterer then my node could identify itself
through cluster_id and node_id combination .


In opensips 2.2 , there is a parameter cluster_id to set in config . But in
3.2 this parameter is not present .


*Thanks & Regards*
*Sasmita Panda*
*Senior Network Testing and Software Engineer*
*3CLogic , ph:07827611765*


On Tue, May 17, 2022 at 1:32 PM Răzvan Crainea  wrote:

> Hi, Sasmita!
>
> I don't fully understand your use case - you said it is using node 1 in
> cluster 1 - it is using it for what?
> A cluster is used for a specific replication feature (i.e. dialog
> replication, ratelimit pipes replication). When you specify you want to
> do a specific replication, that's where you specify the cluster (i.e.
> dialog replication [1]). So what kind of replication feature are you
> using, that is not properly identifying the nodes?
>
> [1]
>
> https://opensips.org/docs/modules/3.2.x/dialog.html#param_dialog_replication_cluster
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 5/12/22 11:43, Sasmita Panda wrote:
> > Hi ,
> >
> > my_node_id parameter is to define that particular node id . But how will
> > I define the cluster_id parameter? I want to differentiate both clusters
> .
> > I have added my_node_id parameter already . But by default its looking
> > for cluster_id:1 . But in the database I have defined cluster_id :2 .
> >
> > modparam("clusterer", "my_node_id", 1)
> >
> > How will I associate the database and config ?
> >
> > */Thanks & Regards/*
> > /Sasmita Panda/
> > /Senior Network Testing and Software Engineer/
> > /3CLogic , ph:07827611765/
> >
> >
> > On Thu, May 12, 2022 at 1:20 PM Chester Lee  > > wrote:
> >
> > Hi,
> >
> > You can specify cluster id in the config. please refer to
> >
> https://opensips.org/docs/modules/3.2.x/clusterer.html#param_my_node_id
> > <
> https://opensips.org/docs/modules/3.2.x/clusterer.html#param_my_node_id>
> >
> > I hope this helps.
> >
> > Regards
> > Chester
> >
> >
> > 2022년 5월 12일 (목) 오후 4:06, Sasmita Panda  > >님이 작성:
> >
> > Hi All ,
> >
> > I have 2 opesips cluster each cluster has 2 opensips node . I
> > want to define all the cluster node information in a single
> > opensips database .
> >
> > My clusterer table looks like below .
> >
> >
>  
> +++-+---+---+-+--+--+---++
> > | id | cluster_id | node_id | url   | state |
> > no_ping_retries | priority | sip_addr | flags | description|
> >
>  
> +++-+---+---+-+--+--+---++
> > |  1 |  1 |   1 | bin:1.1.1.1:
> >  | 1 |   3 |   50 |
> > NULL | seed  | Node A |
> > |  2 |  1 |   2 | bin:2.2.2.2:
> >   | 1 |   3 |   50 |
> > NULL | seed  | Node B |
> > |  3 |  2 |   1 | bin:3.3.3.3:
> >  | 1 |   3 |   50 |
> > NULL | NULL  | cluster2 Node1 |
> > |  4 |  2 |   2 | bin:4.4.4.4:
> >  | 1 |   3 |   50 |
> > NULL | NULL  | cluster2 Node2 |
> >
>  
> +++-+---+---+-+--+--+---++
> >
> > In pensips 3.2 there is no cluster_id parameter to define in the
> > config . In the config I don't want to add the IP in the config
> > . For cluster 2 , when I am defining node 1 , its taking the
> > value of node 1 of cluster 1 .
> >
> > Is this possible anyhow or I have to save the data in a
> > different database ?
> >
> >
> > */Thanks & Regards/*
> > /Sasmita Panda/
> > /Senior Network Testing and Software Engineer/
> > /3CLogic , ph:07827611765/
> > ___
> > Users mailing list
> > Users@lists.opensips.org 
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> > 
> >
> >
> >
> > --
> > __
> >
> >
> > 이 기 원 CTO실 / 매니저
> > (주)직방 | 010.6479.1321 | ches...@zigbang.com
> > 
> > 
> >

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

2022-05-17 Thread Răzvan Crainea


Hi, Sasmita!

I don't fully understand your use case - you said it is using node 1 in 
cluster 1 - it is using it for what?
A cluster is used for a specific replication feature (i.e. dialog 
replication, ratelimit pipes replication). When you specify you want to 
do a specific replication, that's where you specify the cluster (i.e. 
dialog replication [1]). So what kind of replication feature are you 
using, that is not properly identifying the nodes?


[1] 
https://opensips.org/docs/modules/3.2.x/dialog.html#param_dialog_replication_cluster


Răzvan Crainea
OpenSIPS Core Developer
http://www.opensips-solutions.com

On 5/12/22 11:43, Sasmita Panda wrote:

Hi ,

my_node_id parameter is to define that particular node id . But how will 
I define the cluster_id parameter? I want to differentiate both clusters .
I have added my_node_id parameter already . But by default its looking 
for cluster_id:1 . But in the database I have defined cluster_id :2 .


modparam("clusterer", "my_node_id", 1)

How will I associate the database and config ?

*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/


On Thu, May 12, 2022 at 1:20 PM Chester Lee > wrote:


Hi,

You can specify cluster id in the config. please refer to
https://opensips.org/docs/modules/3.2.x/clusterer.html#param_my_node_id


I hope this helps.

Regards
Chester


2022년 5월 12일 (목) 오후 4:06, Sasmita Panda mailto:spa...@3clogic.com>>님이 작성:

Hi All ,

I have 2 opesips cluster each cluster has 2 opensips node . I
want to define all the cluster node information in a single
opensips database .

My clusterer table looks like below .


+++-+---+---+-+--+--+---++
| id | cluster_id | node_id | url                   | state |
no_ping_retries | priority | sip_addr | flags | description    |

+++-+---+---+-+--+--+---++
|  1 |          1 |       1 | bin:1.1.1.1:
 |     1 |               3 |       50 |
NULL     | seed  | Node A         |
|  2 |          1 |       2 | bin:2.2.2.2:
  |     1 |               3 |       50 |
NULL     | seed  | Node B         |
|  3 |          2 |       1 | bin:3.3.3.3:
 |     1 |               3 |       50 |
NULL     | NULL  | cluster2 Node1 |
|  4 |          2 |       2 | bin:4.4.4.4:
 |     1 |               3 |       50 |
NULL     | NULL  | cluster2 Node2 |

+++-+---+---+-+--+--+---++

In pensips 3.2 there is no cluster_id parameter to define in the
config . In the config I don't want to add the IP in the config 
. For cluster 2 , when I am defining node 1 , its taking the

value of node 1 of cluster 1 .

Is this possible anyhow or I have to save the data in a
different database ?


*/Thanks & Regards/*
/Sasmita Panda/
/Senior Network Testing and Software Engineer/
/3CLogic , ph:07827611765/
___
Users mailing list
Users@lists.opensips.org 
http://lists.opensips.org/cgi-bin/mailman/listinfo/users




-- 
__



이 기 원 CTO실 / 매니저
(주)직방 | 010.6479.1321 | ches...@zigbang.com


___
Users mailing list
Users@lists.opensips.org 
http://lists.opensips.org/cgi-bin/mailman/listinfo/users



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

2022-05-12 Thread Sasmita Panda

Hi ,

my_node_id parameter is to define that particular node id . But how will I
define the cluster_id parameter? I want to differentiate both clusters .
I have added my_node_id parameter already . But by default its looking for
cluster_id:1 . But in the database I have defined cluster_id :2 .

modparam("clusterer", "my_node_id", 1)

How will I associate the database and config ?

*Thanks & Regards*
*Sasmita Panda*
*Senior Network Testing and Software Engineer*
*3CLogic , ph:07827611765*


On Thu, May 12, 2022 at 1:20 PM Chester Lee  wrote:

> Hi,
>
> You can specify cluster id in the config. please refer to
> https://opensips.org/docs/modules/3.2.x/clusterer.html#param_my_node_id
>
> I hope this helps.
>
> Regards
> Chester
>
>
> 2022년 5월 12일 (목) 오후 4:06, Sasmita Panda 님이 작성:
>
>> Hi All ,
>>
>> I have 2 opesips cluster each cluster has 2 opensips node . I want to
>> define all the cluster node information in a single opensips database .
>>
>> My clusterer table looks like below .
>>
>>
>> +++-+---+---+-+--+--+---++
>> | id | cluster_id | node_id | url   | state |
>> no_ping_retries | priority | sip_addr | flags | description|
>>
>> +++-+---+---+-+--+--+---++
>> |  1 |  1 |   1 | bin:1.1.1.1: | 1 |   3
>> |   50 | NULL | seed  | Node A |
>> |  2 |  1 |   2 | bin:2.2.2.2:  | 1 |
>> 3 |   50 | NULL | seed  | Node B |
>> |  3 |  2 |   1 | bin:3.3.3.3: | 1 |   3
>> |   50 | NULL | NULL  | cluster2 Node1 |
>> |  4 |  2 |   2 | bin:4.4.4.4: | 1 |   3
>> |   50 | NULL | NULL  | cluster2 Node2 |
>>
>> +++-+---+---+-+--+--+---++
>>
>> In pensips 3.2 there is no cluster_id parameter to define in the config .
>> In the config I don't want to add the IP in the config  . For cluster 2 ,
>> when I am defining node 1 , its taking the value of node 1 of cluster 1 .
>>
>> Is this possible anyhow or I have to save the data in a different
>> database ?
>>
>>
>> *Thanks & Regards*
>> *Sasmita Panda*
>> *Senior Network Testing and Software Engineer*
>> *3CLogic , ph:07827611765*
>> ___
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>
>
> --
> __
>
>
> 이 기 원 CTO실 / 매니저
> (주)직방 | 010.6479.1321 | ches...@zigbang.com
> 
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

2022-05-12 Thread Chester Lee

Hi,

You can specify cluster id in the config. please refer to
https://opensips.org/docs/modules/3.2.x/clusterer.html#param_my_node_id

I hope this helps.

Regards
Chester


2022년 5월 12일 (목) 오후 4:06, Sasmita Panda 님이 작성:

> Hi All ,
>
> I have 2 opesips cluster each cluster has 2 opensips node . I want to
> define all the cluster node information in a single opensips database .
>
> My clusterer table looks like below .
>
>
> +++-+---+---+-+--+--+---++
> | id | cluster_id | node_id | url   | state |
> no_ping_retries | priority | sip_addr | flags | description|
>
> +++-+---+---+-+--+--+---++
> |  1 |  1 |   1 | bin:1.1.1.1: | 1 |   3
> |   50 | NULL | seed  | Node A |
> |  2 |  1 |   2 | bin:2.2.2.2:  | 1 |   3
> |   50 | NULL | seed  | Node B |
> |  3 |  2 |   1 | bin:3.3.3.3: | 1 |   3
> |   50 | NULL | NULL  | cluster2 Node1 |
> |  4 |  2 |   2 | bin:4.4.4.4: | 1 |   3
> |   50 | NULL | NULL  | cluster2 Node2 |
>
> +++-+---+---+-+--+--+---++
>
> In pensips 3.2 there is no cluster_id parameter to define in the config .
> In the config I don't want to add the IP in the config  . For cluster 2 ,
> when I am defining node 1 , its taking the value of node 1 of cluster 1 .
>
> Is this possible anyhow or I have to save the data in a different database
> ?
>
>
> *Thanks & Regards*
> *Sasmita Panda*
> *Senior Network Testing and Software Engineer*
> *3CLogic , ph:07827611765*
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>


-- 
__


이 기 원 CTO실 / 매니저
(주)직방 | 010.6479.1321 | ches...@zigbang.com

___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

2022-05-12 Thread Sasmita Panda

Hi All ,

I have 2 opesips cluster each cluster has 2 opensips node . I want to
define all the cluster node information in a single opensips database .

My clusterer table looks like below .

+++-+---+---+-+--+--+---++
| id | cluster_id | node_id | url   | state |
no_ping_retries | priority | sip_addr | flags | description|
+++-+---+---+-+--+--+---++
|  1 |  1 |   1 | bin:1.1.1.1: | 1 |   3 |
  50 | NULL | seed  | Node A |
|  2 |  1 |   2 | bin:2.2.2.2:  | 1 |   3 |
  50 | NULL | seed  | Node B |
|  3 |  2 |   1 | bin:3.3.3.3: | 1 |   3 |
  50 | NULL | NULL  | cluster2 Node1 |
|  4 |  2 |   2 | bin:4.4.4.4: | 1 |   3 |
  50 | NULL | NULL  | cluster2 Node2 |
+++-+---+---+-+--+--+---++

In pensips 3.2 there is no cluster_id parameter to define in the config .
In the config I don't want to add the IP in the config  . For cluster 2 ,
when I am defining node 1 , its taking the value of node 1 of cluster 1 .

Is this possible anyhow or I have to save the data in a different database ?


*Thanks & Regards*
*Sasmita Panda*
*Senior Network Testing and Software Engineer*
*3CLogic , ph:07827611765*
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

Re: [OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

[OpenSIPS-Users] Need some help in clusterer table and its use in opensips 3.2 .

6 matches

Site Navigation

Mail list logo

Footer information