subject:"\[OpenSIPS\-Users\] Opensips relaying MESSAGE \- source IP problem"

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-08 Thread jose luis millan

Hi Sebastien,

Is the 'mhomed' option set in your configuration file?

regards.


On Sun, Nov 7, 2010 at 2:53 PM, Sebastien CRUAUX scru...@halys.fr wrote:
 I'm getting the same problem with RTP packets... Maybe some issue with
 rtpproxy bridging mode ?



 Le 05/11/2010 11:21, Vallimamod ABDULLAH a écrit :
 Hi,

 Have a look at force_send_socket 
 (http://www.opensips.org/Resources/DocsCoreFcn#toc103)

 Regards,
 - vma
 .

 On Nov 5, 2010, at 11:10 AM, Sebastien CRUAUX wrote:

 Hi,

 I'm encountering some issue with my Opensips configuration.
 My Opensips server is configured to relay SIP MESSAGE requests to
 another server when the destination URI is not located on my server.
 Here is the part of opensips.cfg which is concerned :

 if (!lookup(location,m)) {

    switch ($retcode) {
      case -1:
      case -3:
        rewritehost(10.254.230.148);
        if (is_method(MESSAGE)) {
      rewriteport(5062);
        }
        if (!t_relay()) {
      sl_reply_error();
        } exit;
      case -2:
        sl_send_reply(405, Method Not Allowed);
        exit;
    }
 }

 My server receives SIP requests on eth0 interface (IP 10.254.31.45) but
 when it relays the requests to the server 10.254.230.148 it should use
 eth2 IP (10.254.28.45) as src IP because there is a firewall between the
 two servers and port 5062 is only allowed for source IP 10.254.28.45.
 The problem is the following : when I open Wireshark on my Opensips
 server, I can see that the source IP for the relayed MESSAGE is still
 10.254.31.45 so it never reaches the other server ! I don't understand
 where is the issue, my Linux routing table is OK, when I'm trying to
 reach 10.254.230.148 from my Opensips server using telnet for example it
 uses the right interface and the right gateway. Here is my routing table :

 10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
 10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
 10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
 10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
 192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0

 Did I miss something in Opensips configuration file ?
 Thanks a lot for your help.

 Best Regards,

 Sebastien



 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users

 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users



 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-08 Thread Sebastien CRUAUX

Hi Jose,

This option is not set in my config but actually I managed to figure out 
things using the ie and ei flags in the 
rtpproxy_offer/rtpproxy_answer fonctions.
Thanks for your help !

Best Regards,

Sebastien



Le 08/11/2010 10:16, jose luis millan a écrit :
 Hi Sebastien,

 Is the 'mhomed' option set in your configuration file?

 regards.


 On Sun, Nov 7, 2010 at 2:53 PM, Sebastien CRUAUXscru...@halys.fr  wrote:
 I'm getting the same problem with RTP packets... Maybe some issue with
 rtpproxy bridging mode ?



 Le 05/11/2010 11:21, Vallimamod ABDULLAH a écrit :
 Hi,

 Have a look at force_send_socket 
 (http://www.opensips.org/Resources/DocsCoreFcn#toc103)

 Regards,
 - vma
 .

 On Nov 5, 2010, at 11:10 AM, Sebastien CRUAUX wrote:

 Hi,

 I'm encountering some issue with my Opensips configuration.
 My Opensips server is configured to relay SIP MESSAGE requests to
 another server when the destination URI is not located on my server.
 Here is the part of opensips.cfg which is concerned :

 if (!lookup(location,m)) {

 switch ($retcode) {
   case -1:
   case -3:
 rewritehost(10.254.230.148);
 if (is_method(MESSAGE)) {
   rewriteport(5062);
 }
 if (!t_relay()) {
   sl_reply_error();
 } exit;
   case -2:
 sl_send_reply(405, Method Not Allowed);
 exit;
 }
 }

 My server receives SIP requests on eth0 interface (IP 10.254.31.45) but
 when it relays the requests to the server 10.254.230.148 it should use
 eth2 IP (10.254.28.45) as src IP because there is a firewall between the
 two servers and port 5062 is only allowed for source IP 10.254.28.45.
 The problem is the following : when I open Wireshark on my Opensips
 server, I can see that the source IP for the relayed MESSAGE is still
 10.254.31.45 so it never reaches the other server ! I don't understand
 where is the issue, my Linux routing table is OK, when I'm trying to
 reach 10.254.230.148 from my Opensips server using telnet for example it
 uses the right interface and the right gateway. Here is my routing table :

 10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
 10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
 10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
 10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
 192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0

 Did I miss something in Opensips configuration file ?
 Thanks a lot for your help.

 Best Regards,

 Sebastien



 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users
 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users


 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users

 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-07 Thread Sebastien CRUAUX

I'm getting the same problem with RTP packets... Maybe some issue with 
rtpproxy bridging mode ?



Le 05/11/2010 11:21, Vallimamod ABDULLAH a écrit :
 Hi,

 Have a look at force_send_socket 
 (http://www.opensips.org/Resources/DocsCoreFcn#toc103)

 Regards,
 - vma
 .

 On Nov 5, 2010, at 11:10 AM, Sebastien CRUAUX wrote:

 Hi,

 I'm encountering some issue with my Opensips configuration.
 My Opensips server is configured to relay SIP MESSAGE requests to
 another server when the destination URI is not located on my server.
 Here is the part of opensips.cfg which is concerned :

 if (!lookup(location,m)) {

switch ($retcode) {
  case -1:
  case -3:
rewritehost(10.254.230.148);
if (is_method(MESSAGE)) {
  rewriteport(5062);
}
if (!t_relay()) {
  sl_reply_error();
} exit;
  case -2:
sl_send_reply(405, Method Not Allowed);
exit;
}
 }

 My server receives SIP requests on eth0 interface (IP 10.254.31.45) but
 when it relays the requests to the server 10.254.230.148 it should use
 eth2 IP (10.254.28.45) as src IP because there is a firewall between the
 two servers and port 5062 is only allowed for source IP 10.254.28.45.
 The problem is the following : when I open Wireshark on my Opensips
 server, I can see that the source IP for the relayed MESSAGE is still
 10.254.31.45 so it never reaches the other server ! I don't understand
 where is the issue, my Linux routing table is OK, when I'm trying to
 reach 10.254.230.148 from my Opensips server using telnet for example it
 uses the right interface and the right gateway. Here is my routing table :

 10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
 10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
 10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
 10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
 192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0

 Did I miss something in Opensips configuration file ?
 Thanks a lot for your help.

 Best Regards,

 Sebastien



 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users

 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-05 Thread Sebastien CRUAUX

Hi,

I'm encountering some issue with my Opensips configuration.
My Opensips server is configured to relay SIP MESSAGE requests to 
another server when the destination URI is not located on my server. 
Here is the part of opensips.cfg which is concerned :

if (!lookup(location,m)) {

   switch ($retcode) {
 case -1:
 case -3:
   rewritehost(10.254.230.148);
   if (is_method(MESSAGE)) {
 rewriteport(5062);
   }
   if (!t_relay()) {
 sl_reply_error();
   } exit;
 case -2:
   sl_send_reply(405, Method Not Allowed);
   exit;
   }
}

My server receives SIP requests on eth0 interface (IP 10.254.31.45) but 
when it relays the requests to the server 10.254.230.148 it should use 
eth2 IP (10.254.28.45) as src IP because there is a firewall between the 
two servers and port 5062 is only allowed for source IP 10.254.28.45. 
The problem is the following : when I open Wireshark on my Opensips 
server, I can see that the source IP for the relayed MESSAGE is still 
10.254.31.45 so it never reaches the other server ! I don't understand 
where is the issue, my Linux routing table is OK, when I'm trying to 
reach 10.254.230.148 from my Opensips server using telnet for example it 
uses the right interface and the right gateway. Here is my routing table :

10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0

Did I miss something in Opensips configuration file ?
Thanks a lot for your help.

Best Regards,

Sebastien



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-05 Thread Vallimamod ABDULLAH

Hi,

Have a look at force_send_socket 
(http://www.opensips.org/Resources/DocsCoreFcn#toc103)

Regards,
- vma
.

On Nov 5, 2010, at 11:10 AM, Sebastien CRUAUX wrote:

 Hi,
 
 I'm encountering some issue with my Opensips configuration.
 My Opensips server is configured to relay SIP MESSAGE requests to 
 another server when the destination URI is not located on my server. 
 Here is the part of opensips.cfg which is concerned :
 
 if (!lookup(location,m)) {
 
   switch ($retcode) {
 case -1:
 case -3:
   rewritehost(10.254.230.148);
   if (is_method(MESSAGE)) {
 rewriteport(5062);
   }
   if (!t_relay()) {
 sl_reply_error();
   } exit;
 case -2:
   sl_send_reply(405, Method Not Allowed);
   exit;
   }
 }
 
 My server receives SIP requests on eth0 interface (IP 10.254.31.45) but 
 when it relays the requests to the server 10.254.230.148 it should use 
 eth2 IP (10.254.28.45) as src IP because there is a firewall between the 
 two servers and port 5062 is only allowed for source IP 10.254.28.45. 
 The problem is the following : when I open Wireshark on my Opensips 
 server, I can see that the source IP for the relayed MESSAGE is still 
 10.254.31.45 so it never reaches the other server ! I don't understand 
 where is the issue, my Linux routing table is OK, when I'm trying to 
 reach 10.254.230.148 from my Opensips server using telnet for example it 
 uses the right interface and the right gateway. Here is my routing table :
 
 10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
 10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
 10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
 10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
 192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0
 
 Did I miss something in Opensips configuration file ?
 Thanks a lot for your help.
 
 Best Regards,
 
 Sebastien
 
 
 
 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-05 Thread Sebastien CRUAUX

Hi,

It worked, thank you so much you saved my life !

Sebastien

Le 05/11/2010 11:21, Vallimamod ABDULLAH a écrit :
 Hi,

 Have a look at force_send_socket 
 (http://www.opensips.org/Resources/DocsCoreFcn#toc103)

 Regards,
 - vma
 .

 On Nov 5, 2010, at 11:10 AM, Sebastien CRUAUX wrote:

 Hi,

 I'm encountering some issue with my Opensips configuration.
 My Opensips server is configured to relay SIP MESSAGE requests to
 another server when the destination URI is not located on my server.
 Here is the part of opensips.cfg which is concerned :

 if (!lookup(location,m)) {

switch ($retcode) {
  case -1:
  case -3:
rewritehost(10.254.230.148);
if (is_method(MESSAGE)) {
  rewriteport(5062);
}
if (!t_relay()) {
  sl_reply_error();
} exit;
  case -2:
sl_send_reply(405, Method Not Allowed);
exit;
}
 }

 My server receives SIP requests on eth0 interface (IP 10.254.31.45) but
 when it relays the requests to the server 10.254.230.148 it should use
 eth2 IP (10.254.28.45) as src IP because there is a firewall between the
 two servers and port 5062 is only allowed for source IP 10.254.28.45.
 The problem is the following : when I open Wireshark on my Opensips
 server, I can see that the source IP for the relayed MESSAGE is still
 10.254.31.45 so it never reaches the other server ! I don't understand
 where is the issue, my Linux routing table is OK, when I'm trying to
 reach 10.254.230.148 from my Opensips server using telnet for example it
 uses the right interface and the right gateway. Here is my routing table :

 10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
 10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
 10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
 10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
 192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0

 Did I miss something in Opensips configuration file ?
 Thanks a lot for your help.

 Best Regards,

 Sebastien



 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users

 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users



___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

2010-11-05 Thread Vallimamod ABDULLAH

I am happy for you !
You are welcome ;-)

Regards,
- vma
.

On Nov 5, 2010, at 11:31 AM, Sebastien CRUAUX wrote:

 Hi,
 
 It worked, thank you so much you saved my life !
 
 Sebastien
 
 Le 05/11/2010 11:21, Vallimamod ABDULLAH a écrit :
 Hi,
 
 Have a look at force_send_socket 
 (http://www.opensips.org/Resources/DocsCoreFcn#toc103)
 
 Regards,
 - vma
 .
 
 On Nov 5, 2010, at 11:10 AM, Sebastien CRUAUX wrote:
 
 Hi,
 
 I'm encountering some issue with my Opensips configuration.
 My Opensips server is configured to relay SIP MESSAGE requests to
 another server when the destination URI is not located on my server.
 Here is the part of opensips.cfg which is concerned :
 
 if (!lookup(location,m)) {
 
   switch ($retcode) {
 case -1:
 case -3:
   rewritehost(10.254.230.148);
   if (is_method(MESSAGE)) {
 rewriteport(5062);
   }
   if (!t_relay()) {
 sl_reply_error();
   } exit;
 case -2:
   sl_send_reply(405, Method Not Allowed);
   exit;
   }
 }
 
 My server receives SIP requests on eth0 interface (IP 10.254.31.45) but
 when it relays the requests to the server 10.254.230.148 it should use
 eth2 IP (10.254.28.45) as src IP because there is a firewall between the
 two servers and port 5062 is only allowed for source IP 10.254.28.45.
 The problem is the following : when I open Wireshark on my Opensips
 server, I can see that the source IP for the relayed MESSAGE is still
 10.254.31.45 so it never reaches the other server ! I don't understand
 where is the issue, my Linux routing table is OK, when I'm trying to
 reach 10.254.230.148 from my Opensips server using telnet for example it
 uses the right interface and the right gateway. Here is my routing table :
 
 10.254.230.144 10.254.28.1 255.255.255.240 UG 0 0 0 eth2
 10.254.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
 10.254.28.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
 10.254.29.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
 192.168.0.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 10.254.225.0 10.254.28.1 255.255.255.0 UG 0 0 0 eth2
 0.0.0.0 10.254.31.1 0.0.0.0 UG 0 0 0 eth0
 
 Did I miss something in Opensips configuration file ?
 Thanks a lot for your help.
 
 Best Regards,
 
 Sebastien
 
 
 
 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users
 
 
 
 ___
 Users mailing list
 Users@lists.opensips.org
 http://lists.opensips.org/cgi-bin/mailman/listinfo/users


___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

[OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

Re: [OpenSIPS-Users] Opensips relaying MESSAGE - source IP problem

7 matches

Site Navigation

Mail list logo

Footer information