Re: [OpenSIPS-Users] modparam?
On Wed, Nov 10, 2010 at 5:02 AM, Anton Zagorskiy a.zagors...@oyster-telecom.ru wrote: I'm trying to make HA cluster with balancing. I have 2 servers with openSIPS with load_balanicng and mysql with replication. While both servers are working second openSIPS connects to mysql-master at the first server. When the first server fails then second should uses itself mysql database. So I need to change db_url parameter through all modules. Anton, You may want to check out db_virtual for this. http://www.opensips.org/html/docs/modules/1.6.x/db_virtual -Brett ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam?
Try to use db_virtual to create a failover between several real DB connections. Regards, Bogdan Anton Zagorskiy wrote: I'm trying to make HA cluster with balancing. I have 2 servers with openSIPS with load_balanicng and mysql with replication. While both servers are working second openSIPS connects to mysql-master at the first server. When the first server fails then second should uses itself mysql database. So I need to change db_url parameter through all modules. WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 a.zagors...@oyster-telecom.ru www.oyster-telecom.ru -Original Message- From: users-boun...@lists.opensips.org [mailto:users- boun...@lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu Sent: Wednesday, November 10, 2010 1:16 PM To: OpenSIPS users mailling list Subject: Re: [OpenSIPS-Users] modparam? Hi Anton, no, you cannotwhat module are looking at ? Regards, Bogdan Anton Zagorskiy wrote: Hello. Can I change module's parameter in the route block? I want to change db_url parameter. WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 a.zagors...@oyster-telecom.ru www.oyster-telecom.ru ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users -- Bogdan-Andrei Iancu OpenSIPS Bootcamp 15 - 19 November 2010, Edison, New Jersey, USA www.voice-system.ro ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users -- Bogdan-Andrei Iancu OpenSIPS Bootcamp 15 - 19 November 2010, Edison, New Jersey, USA www.voice-system.ro ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam?
I'm trying to make HA cluster with balancing. I have 2 servers with openSIPS with load_balanicng and mysql with replication. While both servers are working second openSIPS connects to mysql-master at the first server. When the first server fails then second should uses itself mysql database. So I need to change db_url parameter through all modules. WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 a.zagors...@oyster-telecom.ru www.oyster-telecom.ru -Original Message- From: users-boun...@lists.opensips.org [mailto:users- boun...@lists.opensips.org] On Behalf Of Bogdan-Andrei Iancu Sent: Wednesday, November 10, 2010 1:16 PM To: OpenSIPS users mailling list Subject: Re: [OpenSIPS-Users] modparam? Hi Anton, no, you cannotwhat module are looking at ? Regards, Bogdan Anton Zagorskiy wrote: Hello. Can I change module's parameter in the route block? I want to change db_url parameter. WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 a.zagors...@oyster-telecom.ru www.oyster-telecom.ru ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users -- Bogdan-Andrei Iancu OpenSIPS Bootcamp 15 - 19 November 2010, Edison, New Jersey, USA www.voice-system.ro ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam?
Hi Anton, no, you cannotwhat module are looking at ? Regards, Bogdan Anton Zagorskiy wrote: Hello. Can I change module's parameter in the route block? I want to change db_url parameter. WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 a.zagors...@oyster-telecom.ru www.oyster-telecom.ru ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users -- Bogdan-Andrei Iancu OpenSIPS Bootcamp 15 - 19 November 2010, Edison, New Jersey, USA www.voice-system.ro ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
[OpenSIPS-Users] modparam?
Hello. Can I change module's parameter in the route block? I want to change db_url parameter. WBR, Anton Zagorskiy VoIP Developer, Oyster Telecom Phone.: +7 812 601-0666 Fax: +7 812 601-0593 a.zagors...@oyster-telecom.ru www.oyster-telecom.ru ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam auth_db calculate_ha1 yes - does not work
Hi Mani, See http://www.opensips.org/html/docs/modules/1.5.x/auth_db.html#id228152 Regards, Bogdan mani sivaraman wrote: I'm using auth_db for uses to login. If have calculate_ha1 to yes in config file, then opensips keeps sending 401 UnAuth, and user is not able to login. So I set it to 'no' then every thign works fine. It does password authentication even if I say 'no'. So what;s the diff if I say 'yes' or 'no'. modparam(auth_db, calculate_ha1, no) Please let me know how to make the client login with 'yes'. Thanks in advance. ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
[OpenSIPS-Users] modparam auth_db calculate_ha1 yes - does not work
I'm using auth_db for uses to login. If have calculate_ha1 to yes in config file, then opensips keeps sending 401 UnAuth, and user is not able to login. So I set it to 'no' then every thign works fine. It does password authentication even if I say 'no'. So what;s the diff if I say 'yes' or 'no'. modparam(auth_db, calculate_ha1, no) Please let me know how to make the client login with 'yes'. Thanks in advance. ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam with RLS
Hi Michael, Setting those parameters means only informing the module which is the name of the tables it needs in the database. The module won't create those tables. So you should not expect to find those tables if you set the parameters. The default names for the tables are rls_watchers and rls_presentity. Only if you choose to change the name of the tables in the database must you set those parameters. regards, Anca Michael Ciupka wrote: Hello, sorry but i dont know and i cant go on with work. Which table i must fill in here: modparam(rls, rlsubs_table, rls_subscriptions) modparam(rls, rlpres_table, rls_notify) now i have in my database opensips rls_watchers and rls_presentity. Regards Michael ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
[OpenSIPS-Users] modparam with RLS
Hello, i want to configure RLS in Opensips. In the docs/module i found this parameters: modparam(rls, rlsubs_table, rls_subscriptions) modparam(rls, rlpres_table, rls_notify) but i dont found the table´s in database opensips. do i need this modparam? or which table i must write there? Regards Michael ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam with RLS
Hello Iñaki, okay. but which table is the rls_subscription, the rls_watchers or the rls_presentity? REgards Michael Original-Nachricht Datum: Fri, 1 May 2009 16:38:49 +0200 Von: Iñaki Baz Castillo i...@aliax.net An: Michael Ciupka opens...@michael-ciupka.de CC: users@lists.opensips.org Betreff: Re: [OpenSIPS-Users] modparam with RLS 2009/5/1 Michael Ciupka opens...@michael-ciupka.de: Hello, i want to configure RLS in Opensips. In the docs/module i found this parameters: modparam(rls, rlsubs_table, rls_subscriptions) modparam(rls, rlpres_table, rls_notify) but i dont found the table´s in database opensips. do i need this modparam? or which table i must write there? Take a look to this page: http://www.opensips.org/html/docs/db/db-schema-1.5.x.html#AEN5036 -- Iñaki Baz Castillo i...@aliax.net ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
[OpenSIPS-Users] modparam with RLS
Hello, sorry but i dont know and i cant go on with work. Which table i must fill in here: modparam(rls, rlsubs_table, rls_subscriptions) modparam(rls, rlpres_table, rls_notify) now i have in my database opensips rls_watchers and rls_presentity. Regards Michael ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
[OpenSIPS-Users] modparam with RLS
i solved the problem by my self. :) Hello, sorry but i dont know and i cant go on with work. Which table i must fill in here: modparam(rls, rlsubs_table, rls_subscriptions) modparam(rls, rlpres_table, rls_notify) now i have in my database opensips rls_watchers and rls_presentity. Regards Michael ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam(mi_xmlrpc, port, 8080)
Thanks I am sure it is NOT loaded. J. Santos -Original Message- From: Bogdan-Andrei Iancu [mailto:bog...@voice-system.ro] Sent: Monday, January 05, 2009 3:10 AM To: J Santos Cc: users@lists.opensips.org Subject: Re: [OpenSIPS-Users] modparam(mi_xmlrpc, port, 8080) Hi, Are you sure the mi_xmlrpc module is loaded - check the messages before the error your reported. Maybe because some issues with linking to the libxmlrpc-c3 lib, the module is not loaded by the opensips core. Regards, Bogdan J Santos wrote: Hello, I've been trying to compile opensips with libxmlrpc-c3. I installed version 1.10 because version 1.06 doesn't support 64 bits OS. I am using CentoOS 64. The documentation says if libxmlrpc-c3[-dev] package is not available on your system, you may check if packages for your OS are not available on the xmlrpc-cproject ( http://xmlrpc-c.sourceforge.net/). Otherwise you need to install the library and devel headers from the sources. In both cases, keep in mind to use the 0.9.10 version!!. I read somewhere that versions later than 0.9.1.10 could be used though. When recompiling opensips I got Makefile:49: You are using an unsupported libxmlrpc-c3 version (1.10), compile at your own risk! and when starting it I got Dec 31 11:45:43 localhost opensips: CRITICAL:core:yyerror: parse error in config file, line 191, column 22-23: Can't set module parameter Dec 31 11:45:43 localhost opensips: ERROR:core:main: bad config file (1 errors) Line 191 is modparam(mi_xmlrpc, port, 8080) So my question is , how can I make version 0.9.1.0 work for 64 bits OS ? Or any other better option will be welcomed. Please help thanks Jair Santos -- -- ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.2/1873 - Release Date: 1/3/2009 2:14 PM ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam(mi_xmlrpc, port, 8080)
When you try to load the module, what is the error you get? Regards, Bogdan J Santos wrote: Thanks I am sure it is NOT loaded. J. Santos -Original Message- From: Bogdan-Andrei Iancu [mailto:bog...@voice-system.ro] Sent: Monday, January 05, 2009 3:10 AM To: J Santos Cc: users@lists.opensips.org Subject: Re: [OpenSIPS-Users] modparam(mi_xmlrpc, port, 8080) Hi, Are you sure the mi_xmlrpc module is loaded - check the messages before the error your reported. Maybe because some issues with linking to the libxmlrpc-c3 lib, the module is not loaded by the opensips core. Regards, Bogdan J Santos wrote: Hello, I've been trying to compile opensips with libxmlrpc-c3. I installed version 1.10 because version 1.06 doesn't support 64 bits OS. I am using CentoOS 64. The documentation says if libxmlrpc-c3[-dev] package is not available on your system, you may check if packages for your OS are not available on the xmlrpc-cproject ( http://xmlrpc-c.sourceforge.net/). Otherwise you need to install the library and devel headers from the sources. In both cases, keep in mind to use the 0.9.10 version!!. I read somewhere that versions later than 0.9.1.10 could be used though. When recompiling opensips I got Makefile:49: You are using an unsupported libxmlrpc-c3 version (1.10), compile at your own risk! and when starting it I got Dec 31 11:45:43 localhost opensips: CRITICAL:core:yyerror: parse error in config file, line 191, column 22-23: Can't set module parameter Dec 31 11:45:43 localhost opensips: ERROR:core:main: bad config file (1 errors) Line 191 is modparam(mi_xmlrpc, port, 8080) So my question is , how can I make version 0.9.1.0 work for 64 bits OS ? Or any other better option will be welcomed. Please help thanks Jair Santos -- -- ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.2/1873 - Release Date: 1/3/2009 2:14 PM ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Re: [OpenSIPS-Users] modparam(mi_xmlrpc, port, 8080)
Hi, Are you sure the mi_xmlrpc module is loaded - check the messages before the error your reported. Maybe because some issues with linking to the libxmlrpc-c3 lib, the module is not loaded by the opensips core. Regards, Bogdan J Santos wrote: Hello, I've been trying to compile opensips with libxmlrpc-c3. I installed version 1.10 because version 1.06 doesn't support 64 bits OS. I am using CentoOS 64. The documentation says if libxmlrpc-c3[-dev] package is not available on your system, you may check if packages for your OS are not available on the “xmlrpc-c”project ( http://xmlrpc-c.sourceforge.net/). Otherwise you need to install the library and devel headers from the sources. In both cases, keep in mind to use the 0.9.10 version!!. I read somewhere that versions later than 0.9.1.10 could be used though. When recompiling opensips I got Makefile:49: You are using an unsupported libxmlrpc-c3 version (1.10), compile at your own risk! and when starting it I got Dec 31 11:45:43 localhost opensips: CRITICAL:core:yyerror: parse error in config file, line 191, column 22-23: Can't set module parameter Dec 31 11:45:43 localhost opensips: ERROR:core:main: bad config file (1 errors) Line 191 is modparam(mi_xmlrpc, port, 8080) So my question is , how can I make version 0.9.1.0 work for 64 bits OS ? Or any other better option will be welcomed. Please help thanks Jair Santos ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
[OpenSIPS-Users] modparam(mi_xmlrpc, port, 8080)
Hello, I've been trying to compile opensips with libxmlrpc-c3. I installed version 1.10 because version 1.06 doesn't support 64 bits OS. I am using CentoOS 64. The documentation says if libxmlrpc-c3[-dev] package is not available on your system, you may check if packages for your OS are not available on the xmlrpc-cproject ( http://xmlrpc-c.sourceforge.net/ http://xmlrpc-c.sourceforge.net/). Otherwise you need to install the library and devel headers from the sources. In both cases, keep in mind to use the 0.9.10 version!!. I read somewhere that versions later than 0.9.1.10 could be used though. When recompiling opensips I got Makefile:49: You are using an unsupported libxmlrpc-c3 version (1.10), compile at your own risk! and when starting it I got Dec 31 11:45:43 localhost opensips: CRITICAL:core:yyerror: parse error in config file, line 191, column 22-23: Can't set module parameter Dec 31 11:45:43 localhost opensips: ERROR:core:main: bad config file (1 errors) Line 191 is modparam(mi_xmlrpc, port, 8080) So my question is , how can I make version 0.9.1.0 work for 64 bits OS ? Or any other better option will be welcomed. Please help thanks Jair Santos ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users