Re: maven spring eclipse and properties/spring config
Hi Justin,
What is the license? http://www.box-spring.org/license.html doesn't yet
list one .
Brett
Edelson, Justin wrote:
This is getting a little off-topic, but I feel obliged to mention that we
recently open sourced our generalized solution for dealing with the problem of
environmental-specific Spring configuration, known as BoxSpring. Our experience
with both Spring and our prior DI container lead to the conclusion that
property placeholder was not a suitable solution. You can read the details of
this project at http://www.box-spring.org/.
Justin
From: Mohan KR [mailto:kmoh@gmail.com]
Sent: Sat 7/11/2009 1:31 PM
To: 'Maven Users List'
Subject: RE: maven spring eclipse and properties/spring config
Yup, that is a decision you have to make. But in general, the approach I
have been using is
this:
- You spring-context files rarely should be different for each environment
(if you think hard enough, you
can achieve it :)).
- We externalize all environment specific information from Spring Context
files as properties and use
Spring PPC (property placeholder) to substitute the relevant values during
the Bean Factory lifecycle.
- You can do all the resource filtering (maven) on *those* properties files
above that are externalized.
It will take a very long message or an article to show an example :), but
information above should get
you going, I hope.
Thanks,
mohan kr
-Original Message-
From: Tim O'Brien [mailto:tobr...@discursive.com]
Sent: Saturday, July 11, 2009 11:03 AM
To: Maven Users List
Subject: Re: maven spring eclipse and properties/spring config
On Fri, Jul 10, 2009 at 1:54 PM, Vincent Fumoneo...@gmail.com wrote:
I'm converting an old project to maven and I have a question re: spring.
This project has about 20 spring config files and it reads them all in on
startup and uses the In addition I have 4 properties files
(local/dev/qa/prod) that I'd like to use to inject/filter/substitute
values
into them depending on the build. Lastly I am using the eclipse plugin to
generate an eclipse project.
What I need to know is the following :
1) where should I put the spring files? I am considering
src/main/resources/spring
If you load them from the classpath, put them in src/main/resources.
By default everything in this directory will end up in target/classes
(if your project uses a packaging of jar)
2) how should I best filter the props files? Should I use maven for this
(using profiles in some way), or should I load the files in the app and
use
the spring properties configurator?
I don't think anyone on this list is qualified to make this
architectural decision for you. But, if you wanted to use Maven
Resource filtering, you could. You would have a single properties
file: whatever.properties which would contain references to arbitrary
properties such as ${whatever.jdbc.url}, then you would use profiles
and configure resource filtering on this properties file.
3) what is the best way to use the eclipse plugin to generate a project
where I can run the app and it can see the newly filtered spring files
(instead of the src ones)?
m2eclipse is going to automatically call process-resources
resources:testResources every time you change a resource and copy the
result to target/classes. You can control the profile via your
project's Maven preferences in m2eclipse.
Can anyone help me out? I'd certainly give more info if needed.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
RE: maven spring eclipse and properties/spring config
ASL 2. Listed correctly here: http://kenai.com/projects/boxspring, but
didn't make it into the site build.
Justin
-Original Message-
From: Brett Randall [mailto:javabr...@gmail.com]
Sent: Monday, July 13, 2009 2:51 AM
To: Maven Users List
Subject: Re: maven spring eclipse and properties/spring config
Hi Justin,
What is the license? http://www.box-spring.org/license.html doesn't yet
list one .
Brett
Edelson, Justin wrote:
This is getting a little off-topic, but I feel obliged to mention that
we recently open sourced our generalized solution for dealing with the
problem of environmental-specific Spring configuration, known as
BoxSpring. Our experience with both Spring and our prior DI container
lead to the conclusion that property placeholder was not a suitable
solution. You can read the details of this project at
http://www.box-spring.org/.
Justin
From: Mohan KR [mailto:kmoh@gmail.com]
Sent: Sat 7/11/2009 1:31 PM
To: 'Maven Users List'
Subject: RE: maven spring eclipse and properties/spring config
Yup, that is a decision you have to make. But in general, the approach
I have been using is
this:
- You spring-context files rarely should be different for each
environment (if you think hard enough, you
can achieve it :)).
- We externalize all environment specific information from Spring
Context files as properties and use
Spring PPC (property placeholder) to substitute the relevant values
during the Bean Factory lifecycle.
- You can do all the resource filtering (maven) on *those* properties
files above that are externalized.
It will take a very long message or an article to show an example :),
but information above should get you going, I hope.
Thanks,
mohan kr
-Original Message-
From: Tim O'Brien [mailto:tobr...@discursive.com]
Sent: Saturday, July 11, 2009 11:03 AM
To: Maven Users List
Subject: Re: maven spring eclipse and properties/spring config
On Fri, Jul 10, 2009 at 1:54 PM, Vincent Fumoneo...@gmail.com wrote:
I'm converting an old project to maven and I have a question re:
spring.
This project has about 20 spring config files and it reads them all
in on startup and uses the In addition I have 4 properties files
(local/dev/qa/prod) that I'd like to use to inject/filter/substitute
values
into them depending on the build. Lastly I am using the eclipse
plugin to generate an eclipse project.
What I need to know is the following :
1) where should I put the spring files? I am considering
src/main/resources/spring
If you load them from the classpath, put them in src/main/resources.
By default everything in this directory will end up in target/classes
(if your project uses a packaging of jar)
2) how should I best filter the props files? Should I use maven for
this (using profiles in some way), or should I load the files in the
app and
use
the spring properties configurator?
I don't think anyone on this list is qualified to make this
architectural decision for you. But, if you wanted to use Maven
Resource filtering, you could. You would have a single properties
file: whatever.properties which would contain references to arbitrary
properties such as ${whatever.jdbc.url}, then you would use profiles
and configure resource filtering on this properties file.
3) what is the best way to use the eclipse plugin to generate a
project where I can run the app and it can see the newly filtered
spring files (instead of the src ones)?
m2eclipse is going to automatically call process-resources
resources:testResources every time you change a resource and copy the
result to target/classes. You can control the profile via your
project's Maven preferences in m2eclipse.
Can anyone help me out? I'd certainly give more info if needed.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
Re: maven spring eclipse and properties/spring config
On Fri, Jul 10, 2009 at 1:54 PM, Vincent Fumoneo...@gmail.com wrote:
I'm converting an old project to maven and I have a question re: spring.
This project has about 20 spring config files and it reads them all in on
startup and uses the In addition I have 4 properties files
(local/dev/qa/prod) that I'd like to use to inject/filter/substitute values
into them depending on the build. Lastly I am using the eclipse plugin to
generate an eclipse project.
What I need to know is the following :
1) where should I put the spring files? I am considering
src/main/resources/spring
If you load them from the classpath, put them in src/main/resources.
By default everything in this directory will end up in target/classes
(if your project uses a packaging of jar)
2) how should I best filter the props files? Should I use maven for this
(using profiles in some way), or should I load the files in the app and use
the spring properties configurator?
I don't think anyone on this list is qualified to make this
architectural decision for you. But, if you wanted to use Maven
Resource filtering, you could. You would have a single properties
file: whatever.properties which would contain references to arbitrary
properties such as ${whatever.jdbc.url}, then you would use profiles
and configure resource filtering on this properties file.
3) what is the best way to use the eclipse plugin to generate a project
where I can run the app and it can see the newly filtered spring files
(instead of the src ones)?
m2eclipse is going to automatically call process-resources
resources:testResources every time you change a resource and copy the
result to target/classes. You can control the profile via your
project's Maven preferences in m2eclipse.
Can anyone help me out? I'd certainly give more info if needed.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
RE: maven spring eclipse and properties/spring config
Yup, that is a decision you have to make. But in general, the approach I
have been using is
this:
- You spring-context files rarely should be different for each environment
(if you think hard enough, you
can achieve it :)).
- We externalize all environment specific information from Spring Context
files as properties and use
Spring PPC (property placeholder) to substitute the relevant values during
the Bean Factory lifecycle.
- You can do all the resource filtering (maven) on *those* properties files
above that are externalized.
It will take a very long message or an article to show an example :), but
information above should get
you going, I hope.
Thanks,
mohan kr
-Original Message-
From: Tim O'Brien [mailto:tobr...@discursive.com]
Sent: Saturday, July 11, 2009 11:03 AM
To: Maven Users List
Subject: Re: maven spring eclipse and properties/spring config
On Fri, Jul 10, 2009 at 1:54 PM, Vincent Fumoneo...@gmail.com wrote:
I'm converting an old project to maven and I have a question re: spring.
This project has about 20 spring config files and it reads them all in on
startup and uses the In addition I have 4 properties files
(local/dev/qa/prod) that I'd like to use to inject/filter/substitute
values
into them depending on the build. Lastly I am using the eclipse plugin to
generate an eclipse project.
What I need to know is the following :
1) where should I put the spring files? I am considering
src/main/resources/spring
If you load them from the classpath, put them in src/main/resources.
By default everything in this directory will end up in target/classes
(if your project uses a packaging of jar)
2) how should I best filter the props files? Should I use maven for this
(using profiles in some way), or should I load the files in the app and
use
the spring properties configurator?
I don't think anyone on this list is qualified to make this
architectural decision for you. But, if you wanted to use Maven
Resource filtering, you could. You would have a single properties
file: whatever.properties which would contain references to arbitrary
properties such as ${whatever.jdbc.url}, then you would use profiles
and configure resource filtering on this properties file.
3) what is the best way to use the eclipse plugin to generate a project
where I can run the app and it can see the newly filtered spring files
(instead of the src ones)?
m2eclipse is going to automatically call process-resources
resources:testResources every time you change a resource and copy the
result to target/classes. You can control the profile via your
project's Maven preferences in m2eclipse.
Can anyone help me out? I'd certainly give more info if needed.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
RE: maven spring eclipse and properties/spring config
This is getting a little off-topic, but I feel obliged to mention that we
recently open sourced our generalized solution for dealing with the problem of
environmental-specific Spring configuration, known as BoxSpring. Our experience
with both Spring and our prior DI container lead to the conclusion that
property placeholder was not a suitable solution. You can read the details of
this project at http://www.box-spring.org/.
Justin
From: Mohan KR [mailto:kmoh@gmail.com]
Sent: Sat 7/11/2009 1:31 PM
To: 'Maven Users List'
Subject: RE: maven spring eclipse and properties/spring config
Yup, that is a decision you have to make. But in general, the approach I
have been using is
this:
- You spring-context files rarely should be different for each environment
(if you think hard enough, you
can achieve it :)).
- We externalize all environment specific information from Spring Context
files as properties and use
Spring PPC (property placeholder) to substitute the relevant values during
the Bean Factory lifecycle.
- You can do all the resource filtering (maven) on *those* properties files
above that are externalized.
It will take a very long message or an article to show an example :), but
information above should get
you going, I hope.
Thanks,
mohan kr
-Original Message-
From: Tim O'Brien [mailto:tobr...@discursive.com]
Sent: Saturday, July 11, 2009 11:03 AM
To: Maven Users List
Subject: Re: maven spring eclipse and properties/spring config
On Fri, Jul 10, 2009 at 1:54 PM, Vincent Fumoneo...@gmail.com wrote:
I'm converting an old project to maven and I have a question re: spring.
This project has about 20 spring config files and it reads them all in on
startup and uses the In addition I have 4 properties files
(local/dev/qa/prod) that I'd like to use to inject/filter/substitute
values
into them depending on the build. Lastly I am using the eclipse plugin to
generate an eclipse project.
What I need to know is the following :
1) where should I put the spring files? I am considering
src/main/resources/spring
If you load them from the classpath, put them in src/main/resources.
By default everything in this directory will end up in target/classes
(if your project uses a packaging of jar)
2) how should I best filter the props files? Should I use maven for this
(using profiles in some way), or should I load the files in the app and
use
the spring properties configurator?
I don't think anyone on this list is qualified to make this
architectural decision for you. But, if you wanted to use Maven
Resource filtering, you could. You would have a single properties
file: whatever.properties which would contain references to arbitrary
properties such as ${whatever.jdbc.url}, then you would use profiles
and configure resource filtering on this properties file.
3) what is the best way to use the eclipse plugin to generate a project
where I can run the app and it can see the newly filtered spring files
(instead of the src ones)?
m2eclipse is going to automatically call process-resources
resources:testResources every time you change a resource and copy the
result to target/classes. You can control the profile via your
project's Maven preferences in m2eclipse.
Can anyone help me out? I'd certainly give more info if needed.
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
-
To unsubscribe, e-mail: users-unsubscr...@maven.apache.org
For additional commands, e-mail: users-h...@maven.apache.org
