RE: How to display popup using t:popup only on click of a link?
We made a custom control during that time, however I would suggest that you have a look at ContextMenu component from richfaces. It will hopefully satisfy your need. Regards, Madhav -Original Message- From: Sharath2k [mailto:sharath...@yahoo.co.in] Sent: Thursday, January 22, 2009 4:05 AM To: users@myfaces.apache.org Subject: Re: How to display popup using t:popup only on click of a link? Hi Madhav, This might be late reply, but Im also having the same scenario.Can you pls share your solution. Thanks and Regards, Chandu Madhav Bhargava-2 wrote: > > > Hi All, > > > > I have a requirement where I need to mimic the directory structure of > windows. The tree directory structure can be changed by right clicking > on one of the items, similar to what windows has. > > What I have done is the following: > > > > I have defined a tree structure using t:tree2 component. The only > problem with that component is that it does not restore open state as > the t:panelNavigation2 component does. Each of the facets in the tree > encloses just a t:commandLink component. This command link component is > wrapped with t:popup. > > > > So now when the user hovers over a node in the tree (which is a link) > then a popup is displayed. All this is fine but I have a few problems: > > > > 1.I want the popup to be displayed on click of the link and not on > mouse over event. How can I change the behavior of t:popup so that it > gets displayed on mouse click event and not mouse over event? > 2.Say if there is some way in which the first requirement can be > met then how do I pass the value of the node back to the backing bean? > It can be done by having a hidden variable and having an onclick event > on the node (since each node is also a link). But I was looking at using > t:updateActionListener and then passing back the value of the node and > setting a property in the backing bean. How do I access another > component's value and pass it on the click of a menu item (a command > button) in the popup. > > > > To clarify point number 2: > > > > Consider the following tree layout: > > > > Root > >DummyNode1 > > DummySub1.1 > >DummyNode2 > > DummySub2.1 > > DummySub2.2 > > DummySub2.3 > > > > Now when I click DummyNode2 then a popup with the following content > should be shown: > > > > Add Sub Folder > > Modify Folder Properties > > Etc... > > > > So now when the user clicks Add Sub Folder I need to pass DummyNode2 to > the backing bean. What is the best way to do this? > > > > Thanks, > > Madhav > > > > CAUTION - Disclaimer * > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. > This e-mail may contain viruses. Infosys has taken every reasonable > precaution to minimize this risk, but is not liable for any damage you may > sustain as a result of any virus in this e-mail. You should carry out your > own virus checks before opening the e-mail or attachment. Infosys reserves > the right to monitor and review the content of all messages sent to or > from this e-mail address. Messages sent to or from this e-mail address may > be stored on the Infosys e-mail system. > ***INFOSYS End of Disclaimer INFOSYS*** > -- View this message in context: http://www.nabble.com/How-to-display-popup-using-t%3Apopup-only-on-click-of-a-link--tp10194343p21593621.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
Re: How to display popup using t:popup only on click of a link?
Hi Madhav, This might be late reply, but Im also having the same scenario.Can you pls share your solution. Thanks and Regards, Chandu Madhav Bhargava-2 wrote: > > > Hi All, > > > > I have a requirement where I need to mimic the directory structure of > windows. The tree directory structure can be changed by right clicking > on one of the items, similar to what windows has. > > What I have done is the following: > > > > I have defined a tree structure using t:tree2 component. The only > problem with that component is that it does not restore open state as > the t:panelNavigation2 component does. Each of the facets in the tree > encloses just a t:commandLink component. This command link component is > wrapped with t:popup. > > > > So now when the user hovers over a node in the tree (which is a link) > then a popup is displayed. All this is fine but I have a few problems: > > > > 1.I want the popup to be displayed on click of the link and not on > mouse over event. How can I change the behavior of t:popup so that it > gets displayed on mouse click event and not mouse over event? > 2.Say if there is some way in which the first requirement can be > met then how do I pass the value of the node back to the backing bean? > It can be done by having a hidden variable and having an onclick event > on the node (since each node is also a link). But I was looking at using > t:updateActionListener and then passing back the value of the node and > setting a property in the backing bean. How do I access another > component's value and pass it on the click of a menu item (a command > button) in the popup. > > > > To clarify point number 2: > > > > Consider the following tree layout: > > > > Root > >DummyNode1 > > DummySub1.1 > >DummyNode2 > > DummySub2.1 > > DummySub2.2 > > DummySub2.3 > > > > Now when I click DummyNode2 then a popup with the following content > should be shown: > > > > Add Sub Folder > > Modify Folder Properties > > Etc... > > > > So now when the user clicks Add Sub Folder I need to pass DummyNode2 to > the backing bean. What is the best way to do this? > > > > Thanks, > > Madhav > > > > CAUTION - Disclaimer * > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. > This e-mail may contain viruses. Infosys has taken every reasonable > precaution to minimize this risk, but is not liable for any damage you may > sustain as a result of any virus in this e-mail. You should carry out your > own virus checks before opening the e-mail or attachment. Infosys reserves > the right to monitor and review the content of all messages sent to or > from this e-mail address. Messages sent to or from this e-mail address may > be stored on the Infosys e-mail system. > ***INFOSYS End of Disclaimer INFOSYS*** > -- View this message in context: http://www.nabble.com/How-to-display-popup-using-t%3Apopup-only-on-click-of-a-link--tp10194343p21593659.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
Re: How to display popup using t:popup only on click of a link?
Hi Madhav, This might be late reply, but Im also having the same scenario.Can you pls share your solution. Thanks and Regards, Chandu Madhav Bhargava-2 wrote: > > > Hi All, > > > > I have a requirement where I need to mimic the directory structure of > windows. The tree directory structure can be changed by right clicking > on one of the items, similar to what windows has. > > What I have done is the following: > > > > I have defined a tree structure using t:tree2 component. The only > problem with that component is that it does not restore open state as > the t:panelNavigation2 component does. Each of the facets in the tree > encloses just a t:commandLink component. This command link component is > wrapped with t:popup. > > > > So now when the user hovers over a node in the tree (which is a link) > then a popup is displayed. All this is fine but I have a few problems: > > > > 1.I want the popup to be displayed on click of the link and not on > mouse over event. How can I change the behavior of t:popup so that it > gets displayed on mouse click event and not mouse over event? > 2.Say if there is some way in which the first requirement can be > met then how do I pass the value of the node back to the backing bean? > It can be done by having a hidden variable and having an onclick event > on the node (since each node is also a link). But I was looking at using > t:updateActionListener and then passing back the value of the node and > setting a property in the backing bean. How do I access another > component's value and pass it on the click of a menu item (a command > button) in the popup. > > > > To clarify point number 2: > > > > Consider the following tree layout: > > > > Root > >DummyNode1 > > DummySub1.1 > >DummyNode2 > > DummySub2.1 > > DummySub2.2 > > DummySub2.3 > > > > Now when I click DummyNode2 then a popup with the following content > should be shown: > > > > Add Sub Folder > > Modify Folder Properties > > Etc... > > > > So now when the user clicks Add Sub Folder I need to pass DummyNode2 to > the backing bean. What is the best way to do this? > > > > Thanks, > > Madhav > > > > CAUTION - Disclaimer * > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. > This e-mail may contain viruses. Infosys has taken every reasonable > precaution to minimize this risk, but is not liable for any damage you may > sustain as a result of any virus in this e-mail. You should carry out your > own virus checks before opening the e-mail or attachment. Infosys reserves > the right to monitor and review the content of all messages sent to or > from this e-mail address. Messages sent to or from this e-mail address may > be stored on the Infosys e-mail system. > ***INFOSYS End of Disclaimer INFOSYS*** > -- View this message in context: http://www.nabble.com/How-to-display-popup-using-t%3Apopup-only-on-click-of-a-link--tp10194343p21593658.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
Re: How to display popup using t:popup only on click of a link?
Hi Madhav, This might be late reply, but Im also having the same scenario.Can you pls share your solution. Thanks and Regards, Chandu Madhav Bhargava-2 wrote: > > > Hi All, > > > > I have a requirement where I need to mimic the directory structure of > windows. The tree directory structure can be changed by right clicking > on one of the items, similar to what windows has. > > What I have done is the following: > > > > I have defined a tree structure using t:tree2 component. The only > problem with that component is that it does not restore open state as > the t:panelNavigation2 component does. Each of the facets in the tree > encloses just a t:commandLink component. This command link component is > wrapped with t:popup. > > > > So now when the user hovers over a node in the tree (which is a link) > then a popup is displayed. All this is fine but I have a few problems: > > > > 1.I want the popup to be displayed on click of the link and not on > mouse over event. How can I change the behavior of t:popup so that it > gets displayed on mouse click event and not mouse over event? > 2.Say if there is some way in which the first requirement can be > met then how do I pass the value of the node back to the backing bean? > It can be done by having a hidden variable and having an onclick event > on the node (since each node is also a link). But I was looking at using > t:updateActionListener and then passing back the value of the node and > setting a property in the backing bean. How do I access another > component's value and pass it on the click of a menu item (a command > button) in the popup. > > > > To clarify point number 2: > > > > Consider the following tree layout: > > > > Root > >DummyNode1 > > DummySub1.1 > >DummyNode2 > > DummySub2.1 > > DummySub2.2 > > DummySub2.3 > > > > Now when I click DummyNode2 then a popup with the following content > should be shown: > > > > Add Sub Folder > > Modify Folder Properties > > Etc... > > > > So now when the user clicks Add Sub Folder I need to pass DummyNode2 to > the backing bean. What is the best way to do this? > > > > Thanks, > > Madhav > > > > CAUTION - Disclaimer * > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. > This e-mail may contain viruses. Infosys has taken every reasonable > precaution to minimize this risk, but is not liable for any damage you may > sustain as a result of any virus in this e-mail. You should carry out your > own virus checks before opening the e-mail or attachment. Infosys reserves > the right to monitor and review the content of all messages sent to or > from this e-mail address. Messages sent to or from this e-mail address may > be stored on the Infosys e-mail system. > ***INFOSYS End of Disclaimer INFOSYS*** > -- View this message in context: http://www.nabble.com/How-to-display-popup-using-t%3Apopup-only-on-click-of-a-link--tp10194343p21593653.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
Re: How to display popup using t:popup only on click of a link?
Hi Madhav, This might be late reply, but Im also having the same scenario.Can you pls share your solution. Thanks and Regards, Chandu Madhav Bhargava-2 wrote: > > > Hi All, > > > > I have a requirement where I need to mimic the directory structure of > windows. The tree directory structure can be changed by right clicking > on one of the items, similar to what windows has. > > What I have done is the following: > > > > I have defined a tree structure using t:tree2 component. The only > problem with that component is that it does not restore open state as > the t:panelNavigation2 component does. Each of the facets in the tree > encloses just a t:commandLink component. This command link component is > wrapped with t:popup. > > > > So now when the user hovers over a node in the tree (which is a link) > then a popup is displayed. All this is fine but I have a few problems: > > > > 1.I want the popup to be displayed on click of the link and not on > mouse over event. How can I change the behavior of t:popup so that it > gets displayed on mouse click event and not mouse over event? > 2.Say if there is some way in which the first requirement can be > met then how do I pass the value of the node back to the backing bean? > It can be done by having a hidden variable and having an onclick event > on the node (since each node is also a link). But I was looking at using > t:updateActionListener and then passing back the value of the node and > setting a property in the backing bean. How do I access another > component's value and pass it on the click of a menu item (a command > button) in the popup. > > > > To clarify point number 2: > > > > Consider the following tree layout: > > > > Root > >DummyNode1 > > DummySub1.1 > >DummyNode2 > > DummySub2.1 > > DummySub2.2 > > DummySub2.3 > > > > Now when I click DummyNode2 then a popup with the following content > should be shown: > > > > Add Sub Folder > > Modify Folder Properties > > Etc... > > > > So now when the user clicks Add Sub Folder I need to pass DummyNode2 to > the backing bean. What is the best way to do this? > > > > Thanks, > > Madhav > > > > CAUTION - Disclaimer * > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. > This e-mail may contain viruses. Infosys has taken every reasonable > precaution to minimize this risk, but is not liable for any damage you may > sustain as a result of any virus in this e-mail. You should carry out your > own virus checks before opening the e-mail or attachment. Infosys reserves > the right to monitor and review the content of all messages sent to or > from this e-mail address. Messages sent to or from this e-mail address may > be stored on the Infosys e-mail system. > ***INFOSYS End of Disclaimer INFOSYS*** > -- View this message in context: http://www.nabble.com/How-to-display-popup-using-t%3Apopup-only-on-click-of-a-link--tp10194343p21593635.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
Re: How to display popup using t:popup only on click of a link?
Hi Madhav, This might be late reply, but Im also having the same scenario.Can you pls share your solution. Thanks and Regards, Chandu Madhav Bhargava-2 wrote: > > > Hi All, > > > > I have a requirement where I need to mimic the directory structure of > windows. The tree directory structure can be changed by right clicking > on one of the items, similar to what windows has. > > What I have done is the following: > > > > I have defined a tree structure using t:tree2 component. The only > problem with that component is that it does not restore open state as > the t:panelNavigation2 component does. Each of the facets in the tree > encloses just a t:commandLink component. This command link component is > wrapped with t:popup. > > > > So now when the user hovers over a node in the tree (which is a link) > then a popup is displayed. All this is fine but I have a few problems: > > > > 1.I want the popup to be displayed on click of the link and not on > mouse over event. How can I change the behavior of t:popup so that it > gets displayed on mouse click event and not mouse over event? > 2.Say if there is some way in which the first requirement can be > met then how do I pass the value of the node back to the backing bean? > It can be done by having a hidden variable and having an onclick event > on the node (since each node is also a link). But I was looking at using > t:updateActionListener and then passing back the value of the node and > setting a property in the backing bean. How do I access another > component's value and pass it on the click of a menu item (a command > button) in the popup. > > > > To clarify point number 2: > > > > Consider the following tree layout: > > > > Root > >DummyNode1 > > DummySub1.1 > >DummyNode2 > > DummySub2.1 > > DummySub2.2 > > DummySub2.3 > > > > Now when I click DummyNode2 then a popup with the following content > should be shown: > > > > Add Sub Folder > > Modify Folder Properties > > Etc... > > > > So now when the user clicks Add Sub Folder I need to pass DummyNode2 to > the backing bean. What is the best way to do this? > > > > Thanks, > > Madhav > > > > CAUTION - Disclaimer * > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. > This e-mail may contain viruses. Infosys has taken every reasonable > precaution to minimize this risk, but is not liable for any damage you may > sustain as a result of any virus in this e-mail. You should carry out your > own virus checks before opening the e-mail or attachment. Infosys reserves > the right to monitor and review the content of all messages sent to or > from this e-mail address. Messages sent to or from this e-mail address may > be stored on the Infosys e-mail system. > ***INFOSYS End of Disclaimer INFOSYS*** > -- View this message in context: http://www.nabble.com/How-to-display-popup-using-t%3Apopup-only-on-click-of-a-link--tp10194343p21593621.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
Re: JSF datable empty rows, position of components in UI
Thanx Simon, I did not think about rendered attribute :) On 1/21/09, Simon Kitching wrote: > > Ayub Khan schrieb: > > Hi, > > > > Could any give some tips in resolving the below issues ? > > > > 1) Display empty rows of data table in JSF, if the list which is bounded > > to datable is empty then I need to view atleast one empty row. > > > > 2) UI has one datable and a form below it, I need to show the empty > > table if there are no records and there should be little space (gap) > > between Table and the form below. Currently there is no space between > > table and form and their position is also not fixed. Like as I add rows > > to the table the form below it is getting pushed below. How to fix the > > position of these two and also have a space between them. > > > here goes the stuff you want to render when there are no records > > > > here goes the normal table > > > > Regards, Simon > -- > -- Emails in "mixed" posting style will be ignored > -- (http://en.wikipedia.org/wiki/Posting_style) > -- -- "Two roads diverged in a wood And I took the one less traveled by And that has made all the difference. Robert Frost."
Re: JSF datable empty rows, position of components in UI
Ayub Khan schrieb: > Hi, > > Could any give some tips in resolving the below issues ? > > 1) Display empty rows of data table in JSF, if the list which is bounded > to datable is empty then I need to view atleast one empty row. > > 2) UI has one datable and a form below it, I need to show the empty > table if there are no records and there should be little space (gap) > between Table and the form below. Currently there is no space between > table and form and their position is also not fixed. Like as I add rows > to the table the form below it is getting pushed below. How to fix the > position of these two and also have a space between them. here goes the stuff you want to render when there are no records here goes the normal table Regards, Simon -- -- Emails in "mixed" posting style will be ignored -- (http://en.wikipedia.org/wiki/Posting_style)
Re: execute multiple buttons in jsf one after the other
Why not just call in the server the all the 3 actions? On Wed, Jan 21, 2009 at 12:49 PM, pharish2 wrote: > > Hi, > > I am working on jsf project, I want to execute the 3 buttons one after the > other as after getting the first button response I have to execute the > second button, how to do? > I tried using do using javascript and AJAX but the page is not getting > refreshed. Is their any way I can do it. > > Thanks > harish > -- > View this message in context: > http://www.nabble.com/execute-multiple-buttons-in-jsf-one-after-the-other-tp21580777p21580777.html > Sent from the MyFaces - Users mailing list archive at Nabble.com. > >
execute multiple buttons in jsf one after the other
Hi, I am working on jsf project, I want to execute the 3 buttons one after the other as after getting the first button response I have to execute the second button, how to do? I tried using do using javascript and AJAX but the page is not getting refreshed. Is their any way I can do it. Thanks harish -- View this message in context: http://www.nabble.com/execute-multiple-buttons-in-jsf-one-after-the-other-tp21580777p21580777.html Sent from the MyFaces - Users mailing list archive at Nabble.com.
