date:20140919

Re: [ovirt-users] Admin console - Always show advanced options

2014-09-19 Thread Gianluca Cecchi

On Fri, Sep 19, 2014 at 8:03 PM, Trey Dockendorf  wrote:

> If it was 3.4 then it's not working as I've always had to click the
> advanced options.  Likely a 3.5 feature then?
>
> - Trey
>
>
I can confirn that I've verified on a 3.5rc2 oVirt installation the setting
is persistent across logout and restart of browser

It you enable advanced options for a VM, you get this setting for other VMs
too and this setting is preserved upon logout and also restart of browser
session.
The same if you select "Hide advanced options" coming from a previously
Advanced setting.

On another installation with 3.4.1 the default setting is that you have
always to explicitly enable advanced options, also in the same session for
other VMs after enabling it for one of them.

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Admin console - Always show advanced options

2014-09-19 Thread Trey Dockendorf

If it was 3.4 then it's not working as I've always had to click the
advanced options.  Likely a 3.5 feature then?

- Trey
On Sep 19, 2014 7:33 AM, "Alexander Wels"  wrote:

> It should remember your setting of the advanced mode so once you clicked it
> once, the next time it should be in advanced mode. I forget which version
> this
> became available, might be 3.5 or might be 3.4.
>
>
> On Friday, September 19, 2014 02:38:38 PM John Gardeniers wrote:
> > Hi All,
> >
> > When viewing/editing a VM's properties in the admin console is it
> > possible to show the advanced options by default? Quite frankly, I can't
> > understand why that isn't the default. The standard options show nothing
> > that isn't already visible in the properties window in the console, so
> > what's the point of making that the default in the editing window?
> >
> > Regards,
> > John
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status

2014-09-19 Thread Vojtech Szocs



- Original Message -
> From: "Sandro Bonazzola" 
> To: Users@ovirt.org, de...@ovirt.org
> Sent: Friday, September 19, 2014 9:54:00 AM
> Subject: [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status
> 
> Hi,
> We are going to start composing oVirt 3.5.0 GA (or RC3, depending on Monday
> morning Go / No go Meeting decisions) on Monday 2014-09-22.
> 
> Maintainers:
> - Please be sure that 3.5 snapshot satisfy release criteria[9]
> - Please be sure that no pending patches are going to block the release
> - If any patch must block the GA release please raise the issue as soon as
> possible.
> - If any packages need a rebase please raise the issue as soon as possible.
> - Be aware that packages that doesn't need a rebase must be re-built with
> final release versioning from the RC2 tag.
> 
> The bug tracker [1] shows the following proposed blockers to be reviewed:
> 
> Bug IDWhiteboard  Status  Summary
> 1144079   integration POSTlocal engine-reports-setup does not 
> write conf file
> to allow accessing reports from engine
> 1138340   sla POSTvdsm relies on unsupported 
> 'min_guarantee' VM configuration
> parameter
> 1143873   network NEW firewall-cmd gets stuck when run as 
> superVDSM
> subsubprocess
> 1142256   integration NEW remote engine-reports-setup does not 
> write conf file
> to allow accessing reports from engine
> 
> 
> And the following dependencies still open:
> Bug 1041569 - [NFR] libvirt: Returning the watermark for all the images
> opened for writing
> 
> The following bugs are keyworded as Regression and not marked as blockers[10]
> 
> Bug IDWhiteboard  Status  Summary
> 1142709   infra   NEW Trying to deploy hosted-engine via iSCSI device 
> fails
> 1138144   storage NEW Failed to autorecover storage domain after 
> unblocking
> connection with host
> 1118349   storage NEW [vdsm] Creating DataCenter 3.5 using master 
> domain V1
> fails with InquireNotSupportedError
> 1110444   ux  POSTbookmark selection does not work on first try

3.5 patch fully acked, ready for merge, BZ still POST but should be MODIFIED 
once merge.

> 1138314   virtNEW Fail to start vm with payload.
> 
> 
> Feature freeze is now effective, and branch has been created.
> All new patches must be backported to 3.5 branch too.
> Features completed are marked in green on Features Status Table [2]
> 
> There are still 86 bugs [3] targeted to 3.5.0.
> Excluding node and documentation bugs we still have 62 bugs [4] targeted to
> 3.5.0.
> 
> More in detail [5]:
> 
> WhiteboardNEW ASSIGNEDPOSTTotal
> docs  13  1   0   14
> gluster   8   4   2   14
> i18n  0   0   1   1
> infra 0   1   2   3
> integration   3   1   2   6
> network   0   1   0   1
> node  7   4   0   11
> ppc   2   0   4   6
> sla   12  0   7   19
> virt  8   0   3   11
> Total 53  12  21  86
> 
> 
> 
> Maintainers / Assignee:
> - Please ensure that completed features are marked in green on Features
> Status Table [2]
> - If you find a blocker bug please remember to add it to the tracker [1]
> - Please fill release notes, the page has been created here [6]
> - Please review results from Third Test Day on the etherpad [7] and on the
> mailing lists
> - Please update the target to 3.5.1 or later for bugs that won't be in 3.5.0:
>   it will ease gathering the blocking bugs for next releases.
> 
> Community:
> - You're welcome to join us testing last release candidate or nightly builds
> and getting involved in oVirt Quality Assurance[8]
> 
> [1] http://bugzilla.redhat.com/1073943
> [2] http://goo.gl/4SuYdE
> [3] http://red.ht/1pVEk7H
> [4] http://red.ht/1zT2mSq
> [5] http://red.ht/1q7SqNL
> [6] http://www.ovirt.org/OVirt_3.5_Release_Notes
> [7] http://etherpad.ovirt.org/p/3.5-testday-3
> [8] http://www.ovirt.org/OVirt_Quality_Assurance
> [9]
> http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria_.28WIP.29
> [10] http://goo.gl/uavikG
> 
> Thanks,
> 
> --
> Sandro Bonazzola
> Better technology. Faster innovation. Powered by community collaboration.
> See how it works at redhat.com
> ___
> Devel mailing list
> de...@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/devel
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] How to increase detail in displayed reports

2014-09-19 Thread Grzegorz Szypa

How to increase detail in displayed reports, for example. Network report?

Can Defining your own reports, if yes, how to do it?

-- 
G.Sz.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] hosted engine setup on second host fails

2014-09-19 Thread Itamar Heim


On 09/19/2014 03:32 PM, Stefan Wendler wrote:

Hi there.

I'm trying to install a hosted-engine on our second node (fist engine
runs on node1).

But I always get the message:

[ ERROR ] Cannot automatically add the host to the Default cluster:
Cannot add Host. Host with the same address already exists.

I'm not entirely sure what I have to do when this message comes, so I
just press ENTER:

###
To continue make a selection from the options below:
   (1) Continue setup - engine installation is complete
   (2) Power off and restart the VM
   (3) Abort setup

   (1, 2, 3)[1]:


Is there any other interaction required prior to selecting "1"?

In the Web Gui I get the following message:

X Adding new Host hosted_engine_2 to Cluster Default

Here is the console output:

# hosted-engine --deploy
[ INFO  ] Stage: Initializing
   Continuing will configure this host for serving as hypervisor
and create a VM where you have to install oVirt Engine afterwards.
   Are you sure you want to continue? (Yes, No)[Yes]:
[ INFO  ] Generating a temporary VNC password.
[ INFO  ] Stage: Environment setup
   Configuration files: []
   Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140919141012-k2lag6.log
   Version: otopi-1.2.3 (otopi-1.2.3-1.el6)
[ INFO  ] Hardware supports virtualization
[ INFO  ] Bridge ovirtmgmt already created
[ INFO  ] Stage: Environment packages setup
[ INFO  ] Stage: Programs detection
[ INFO  ] Stage: Environment setup
[ INFO  ] Stage: Environment customization

   --== STORAGE CONFIGURATION ==--

   During customization use CTRL-D to abort.
   Please specify the storage you would like to use (nfs3,
nfs4)[nfs3]:
   Please specify the full shared storage connection path to use
(example: host:/path): :/volume1
   The specified storage location already contains a data domain.
Is this an additional host setup (Yes, No)[Yes]?
[ INFO  ] Installing on additional host
   Please specify the Host ID [Must be integer, default: 2]:
   The Host ID is already known. Is this a re-deployment on an
additional host that was previously set up (Yes, No)[Yes]?

   --== SYSTEM CONFIGURATION ==--

[WARNING] A configuration file must be supplied to deploy Hosted Engine
on an additional host.
   The answer file may be fetched from the first host using scp.
   If you do not want to download it automatically you can abort
the setup answering no to the following question.
   Do you want to scp the answer file from the first host? (Yes,
No)[Yes]:
   Please provide the FQDN or IP of the first host: 
   Enter 'root' user password for host :
[ INFO  ] Answer file successfully downloaded

   --== NETWORK CONFIGURATION ==--

   The following CPU types are supported by this host:
  - model_Westmere: Intel Westmere Family
  - model_Nehalem: Intel Nehalem Family
  - model_Penryn: Intel Penryn Family
  - model_Conroe: Intel Conroe Family

   --== HOSTED ENGINE CONFIGURATION ==--

   Enter the name which will be used to identify this host inside
the Administrator Portal [hosted_engine_2]:
   Enter 'admin@internal' user password that will be used for
accessing the Administrator Portal:
   Confirm 'admin@internal' user password:
  [ INFO  ] Stage: Setup validation

   --== CONFIGURATION PREVIEW ==--

   Engine FQDN: engine.domain
   Bridge name: ovirtmgmt
   SSH daemon port: 22
   Gateway address: 
   Host name for web application  : hosted_engine_2
   Host ID: 2
   Image size GB  : 25
   Storage connection : :/volume1
   Console type   : vnc
   Memory size MB : 8192
   MAC address: 00:16:3e:3b:8d:66
   Boot type  : disk
   Number of CPUs : 2
   CPU Type   : model_Westmere

   Please confirm installation settings (Yes, No)[No]: yes
[ ERROR ] Invalid value

   Please confirm installation settings (Yes, No)[No]: Yes
[ INFO  ] Stage: Transaction setup
[ INFO  ] Stage: Misc configuration
[ INFO  ] Stage: Package installation
[ INFO  ] Stage: Misc configuration
[ INFO  ] Configuring libvirt
[ INFO  ] Configuring VDSM
[ INFO  ] Starting vdsmd
[ INFO  ] Waiting for VDSM hardware info
[ INFO  ] Waiting for VDSM hardware info
[ INFO  ] Connecting Storage Domain
[ INFO  ] Configuring VM
[ INFO  ] Updating hosted-engine configuration
[ INFO  ] Stage: Transaction commit
[ INFO  ] Stage: Closing up
   To continue

Re: [ovirt-users] Admin console - Always show advanced options

2014-09-19 Thread Alexander Wels

It should remember your setting of the advanced mode so once you clicked it 
once, the next time it should be in advanced mode. I forget which version this 
became available, might be 3.5 or might be 3.4.


On Friday, September 19, 2014 02:38:38 PM John Gardeniers wrote:
> Hi All,
> 
> When viewing/editing a VM's properties in the admin console is it
> possible to show the advanced options by default? Quite frankly, I can't
> understand why that isn't the default. The standard options show nothing
> that isn't already visible in the properties window in the console, so
> what's the point of making that the default in the editing window?
> 
> Regards,
> John
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] hosted engine setup on second host fails

2014-09-19 Thread Stefan Wendler

Hi there.

I'm trying to install a hosted-engine on our second node (fist engine
runs on node1).

But I always get the message:

[ ERROR ] Cannot automatically add the host to the Default cluster:
Cannot add Host. Host with the same address already exists.

I'm not entirely sure what I have to do when this message comes, so I
just press ENTER:

###
To continue make a selection from the options below:
  (1) Continue setup - engine installation is complete
  (2) Power off and restart the VM
  (3) Abort setup

  (1, 2, 3)[1]:


Is there any other interaction required prior to selecting "1"?

In the Web Gui I get the following message:

X Adding new Host hosted_engine_2 to Cluster Default

Here is the console output:

# hosted-engine --deploy
[ INFO  ] Stage: Initializing
  Continuing will configure this host for serving as hypervisor
and create a VM where you have to install oVirt Engine afterwards.
  Are you sure you want to continue? (Yes, No)[Yes]:
[ INFO  ] Generating a temporary VNC password.
[ INFO  ] Stage: Environment setup
  Configuration files: []
  Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140919141012-k2lag6.log
  Version: otopi-1.2.3 (otopi-1.2.3-1.el6)
[ INFO  ] Hardware supports virtualization
[ INFO  ] Bridge ovirtmgmt already created
[ INFO  ] Stage: Environment packages setup
[ INFO  ] Stage: Programs detection
[ INFO  ] Stage: Environment setup
[ INFO  ] Stage: Environment customization

  --== STORAGE CONFIGURATION ==--

  During customization use CTRL-D to abort.
  Please specify the storage you would like to use (nfs3,
nfs4)[nfs3]:
  Please specify the full shared storage connection path to use
(example: host:/path): :/volume1
  The specified storage location already contains a data domain.
Is this an additional host setup (Yes, No)[Yes]?
[ INFO  ] Installing on additional host
  Please specify the Host ID [Must be integer, default: 2]:
  The Host ID is already known. Is this a re-deployment on an
additional host that was previously set up (Yes, No)[Yes]?

  --== SYSTEM CONFIGURATION ==--

[WARNING] A configuration file must be supplied to deploy Hosted Engine
on an additional host.
  The answer file may be fetched from the first host using scp.
  If you do not want to download it automatically you can abort
the setup answering no to the following question.
  Do you want to scp the answer file from the first host? (Yes,
No)[Yes]:
  Please provide the FQDN or IP of the first host: 
  Enter 'root' user password for host :
[ INFO  ] Answer file successfully downloaded

  --== NETWORK CONFIGURATION ==--

  The following CPU types are supported by this host:
 - model_Westmere: Intel Westmere Family
 - model_Nehalem: Intel Nehalem Family
 - model_Penryn: Intel Penryn Family
 - model_Conroe: Intel Conroe Family

  --== HOSTED ENGINE CONFIGURATION ==--

  Enter the name which will be used to identify this host inside
the Administrator Portal [hosted_engine_2]:
  Enter 'admin@internal' user password that will be used for
accessing the Administrator Portal:
  Confirm 'admin@internal' user password:
 [ INFO  ] Stage: Setup validation

  --== CONFIGURATION PREVIEW ==--

  Engine FQDN: engine.domain
  Bridge name: ovirtmgmt
  SSH daemon port: 22
  Gateway address: 
  Host name for web application  : hosted_engine_2
  Host ID: 2
  Image size GB  : 25
  Storage connection : :/volume1
  Console type   : vnc
  Memory size MB : 8192
  MAC address: 00:16:3e:3b:8d:66
  Boot type  : disk
  Number of CPUs : 2
  CPU Type   : model_Westmere

  Please confirm installation settings (Yes, No)[No]: yes
[ ERROR ] Invalid value

  Please confirm installation settings (Yes, No)[No]: Yes
[ INFO  ] Stage: Transaction setup
[ INFO  ] Stage: Misc configuration
[ INFO  ] Stage: Package installation
[ INFO  ] Stage: Misc configuration
[ INFO  ] Configuring libvirt
[ INFO  ] Configuring VDSM
[ INFO  ] Starting vdsmd
[ INFO  ] Waiting for VDSM hardware info
[ INFO  ] Waiting for VDSM hardware info
[ INFO  ] Connecting Storage Domain
[ INFO  ] Configuring VM
[ INFO  ] Updating hosted-engine configuration
[ INFO  ] Stage: Transaction commit
[ INFO  ] Stage: Closing up
  To continue make a selection from the options below:
  (1) Continue setup - engine installation is comp

Re: [ovirt-users] console spice questions

2014-09-19 Thread David Jaša

Hi,

On Pá, 2014-09-19 at 10:26 +, Bill Dossett wrote:
> Thanks David, I appreciate the help.  I installed virt-manager on my 
> virt-engine. 

That isn't needed.

> And I have installed virt-viewer on my workstation... 

This is what I advised.

> I am still not getting a console though. I don't quite understand if I have 
> to do anything further..  I have checked the faq and looked at the screen 
> shots, but I am not much the wiser... is there any more detail I can read on 
> installing and getting this running? 

Once you install virt-viewer in Windows, it should be associated
with .vv files. When you click Console then, you should be offered
with .vv file download, let it open with virt-viewer (should work
out-of-the-box) and voilà, you should see your console.

If you're not offered with .vv file for download, try choosing "Native
client" method in Console options (and of course if you have spice
console selected in VM options)

so,

> I am assuming I connect to virt-engine for this - should the console button 
> in the virt-engine bring up the remote viewer,

yes, it should,

>  or do I have to start the remote view separately? 

no,

> I turned the firewall off to make sure that isn't the problem. 

Firewall is not involved unless you restrict outbound connections as
well,

> It appears its trying fire virt-manager up on to a remote x display I guess, 
> but I just get "unable to connect to the graphic server 
> spice://ovirt.pbi.global.pvt:5900 " 

again, virt-manager is not the thingy you want, virt-viewer is.

HTH,

David

>  Any further advice on getting this running would be greatly appreciated.
> 
> Bill
> 
> 
> -Original Message-
> From: David Jaša [mailto:dj...@redhat.com]
> Sent: 19 September 2014 09:05
> To: Bill Dossett
> Cc: users@ovirt.org
> Subject: Re: [ovirt-users] console spice questions
> 
> Hi Bill,
> 
> Yes, the document is already dated. Lately, you don't have to go through the 
> hoops needed to make spice-x work. Even if you can get it, it will only work 
> for you in IE < 11. You should instead just install virt-viewer [1] and the 
> consoles should Just Work for you using the Natice Client (.vv file) method.
> 
> David
> 
> [1] http://virt-manager.org/download/
> 
> 
> On Fri, 2014-09-19 at 07:20 +, Bill Dossett wrote:
> > Hi
> >
> >
> >
> > After setting up an ovirt cluster with 4 hosts and getting my
> > networking and vlans all connected I’m pretty impressed with ovirt.  I
> > am however not too impressed with trying to actually get a console
> > into a VM.  I’m not sure why this isn’t included in the ovirt engine
> > to begin with as console access to actually configure a VM to make
> > templates of seems a pretty basic tenant of virtualisation.
> >
> >
> >
> > Anyway, I am following the guide
> > http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal  and
> > trying to download spice.cab to follow the rather long procedure to
> > install, however the link on that page gives a 404 page not found
> > error.  Could someone point me to the actual download?  Is this
> > document perhaps outdated and I am following the wrong path?
> >
> >
> >
> > Thanks
> >
> >
> >
> > Bill Dossett
> >
> > Virtualisation Architect
> >
> >
> > Pitney Bowes – Tech Central
> >
> > 6 Hercules Way, 600 Leavesden Park
> >
> > Watford, WD25 7GS
> >
> >
> > Phone(+44) (0)1923 279353 | VOIP: 54739353
> >
> > Mobile(+44) (0)7775 908612
> >
> >
> > bill.doss...@pb.com
> >
> > www.pb.com
> >
> >
> >
> > In Engineering?Raise a ticket via Remedy Anywhere [HERE]takes less
> > than a minute
> >
> >
> >
> >
> >
> > ManageIQ User Guide available [HERE]
> >
> >
> >
> > Check out the ManageIQ Blog for recent enhancements and information
> > [HERE]
> >
> >
> >
> >
> >
> >
> >
> >
> > __
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> 
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] console spice questions

2014-09-19 Thread Alexander Wels

On Friday, September 19, 2014 10:26:55 AM Bill Dossett wrote:
> Thanks David, I appreciate the help.  I installed virt-manager on my
> virt-engine.  And I have installed virt-viewer on my workstation...  I am
> still not getting a console though. I don't quite understand if I have to
> do anything further..  I have checked the faq and looked at the screen
> shots, but I am not much the wiser... is there any more detail I can read
> on installing and getting this running?  I am assuming I connect to
> virt-engine for this - should the console button in the virt-engine bring
> up the remote viewer, or do I have to start the remote view separately?  I
> turned the firewall off to make sure that isn't the problem.  It appears
> its trying fire virt-manager up on to a remote x display I guess, but I
> just get "unable to connect to the graphic server
> spice://ovirt.pbi.global.pvt:5900 "  Any further advice on getting this
> running would be greatly appreciated.
 
Odds are your machine you are trying to connect with does not have the fully 
qualified domain name of the host it is trying to connect to. If you don't have 
DNS setup for it you should be able to add it to your hosts file (we recommend 
DNS though). If that is not the problem you can simply download the .vv and 
manually start the viewer with a debug flag, and it will tell you in detail 
what the problem is.

remote-viewer xxx.vv --debug

Note there is a time limit on how long the ticket is active, if I recall 
correctly its 120 seconds, so be fast when you do it.


> Bill
> 
> 
> -Original Message-
> From: David Jaša [mailto:dj...@redhat.com]
> Sent: 19 September 2014 09:05
> To: Bill Dossett
> Cc: users@ovirt.org
> Subject: Re: [ovirt-users] console spice questions
> 
> Hi Bill,
> 
> Yes, the document is already dated. Lately, you don't have to go through the
> hoops needed to make spice-x work. Even if you can get it, it will only
> work for you in IE < 11. You should instead just install virt-viewer [1]
> and the consoles should Just Work for you using the Natice Client (.vv
> file) method.
 
> David
> 
> [1] http://virt-manager.org/download/
> 
> 
> On Fri, 2014-09-19 at 07:20 +, Bill Dossett wrote:
> 
> > Hi
> >
> >
> >
> >
> >
> > After setting up an ovirt cluster with 4 hosts and getting my
> > networking and vlans all connected I’m pretty impressed with ovirt.  I
> > am however not too impressed with trying to actually get a console
> > into a VM.  I’m not sure why this isn’t included in the ovirt engine
> > to begin with as console access to actually configure a VM to make
> > templates of seems a pretty basic tenant of virtualisation.
> >
> >
> >
> >
> >
> > Anyway, I am following the guide
> > http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal  and
> > trying to download spice.cab to follow the rather long procedure to
> > install, however the link on that page gives a 404 page not found
> > error.  Could someone point me to the actual download?  Is this
> > document perhaps outdated and I am following the wrong path?
> >
> >
> >
> >
> >
> > Thanks
> >
> >
> >
> >
> >
> > Bill Dossett
> >
> >
> >
> > Virtualisation Architect
> >
> >
> >
> >
> > Pitney Bowes – Tech Central
> >
> >
> >
> > 6 Hercules Way, 600 Leavesden Park
> >
> >
> >
> > Watford, WD25 7GS
> >
> >
> >
> >
> > Phone(+44) (0)1923 279353 | VOIP: 54739353
> >
> >
> >
> > Mobile(+44) (0)7775 908612
> >
> >
> >
> >
> > bill.doss...@pb.com
> >
> >
> >
> > www.pb.com
> >
> >
> >
> >
> >
> > In Engineering?Raise a ticket via Remedy Anywhere [HERE]takes less
> > than a minute
> >
> >
> >
> >
> >
> >
> >
> > ManageIQ User Guide available [HERE]
> >
> >
> >
> >
> >
> > Check out the ManageIQ Blog for recent enhancements and information
> > [HERE]
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > __
> >
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> 
> 
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] console spice questions

2014-09-19 Thread Bill Dossett

Thanks David, I appreciate the help.  I installed virt-manager on my 
virt-engine.  And I have installed virt-viewer on my workstation...  I am still 
not getting a console though. I don't quite understand if I have to do anything 
further..  I have checked the faq and looked at the screen shots, but I am not 
much the wiser... is there any more detail I can read on installing and getting 
this running?  I am assuming I connect to virt-engine for this - should the 
console button in the virt-engine bring up the remote viewer, or do I have to 
start the remote view separately?  I turned the firewall off to make sure that 
isn't the problem.  It appears its trying fire virt-manager up on to a remote x 
display I guess, but I just get "unable to connect to the graphic server 
spice://ovirt.pbi.global.pvt:5900 "  Any further advice on getting this running 
would be greatly appreciated.

Bill

-Original Message-
From: David Jaša [mailto:dj...@redhat.com]
Sent: 19 September 2014 09:05
To: Bill Dossett
Cc: users@ovirt.org
Subject: Re: [ovirt-users] console spice questions

Hi Bill,

Yes, the document is already dated. Lately, you don't have to go through the 
hoops needed to make spice-x work. Even if you can get it, it will only work 
for you in IE < 11. You should instead just install virt-viewer [1] and the 
consoles should Just Work for you using the Natice Client (.vv file) method.

David

[1] http://virt-manager.org/download/

On Fri, 2014-09-19 at 07:20 +, Bill Dossett wrote:
> Hi
>
>
>
> After setting up an ovirt cluster with 4 hosts and getting my
> networking and vlans all connected I’m pretty impressed with ovirt.  I
> am however not too impressed with trying to actually get a console
> into a VM.  I’m not sure why this isn’t included in the ovirt engine
> to begin with as console access to actually configure a VM to make
> templates of seems a pretty basic tenant of virtualisation.
>
>
>
> Anyway, I am following the guide
> http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal  and
> trying to download spice.cab to follow the rather long procedure to
> install, however the link on that page gives a 404 page not found
> error.  Could someone point me to the actual download?  Is this
> document perhaps outdated and I am following the wrong path?
>
>
>
> Thanks
>
>
>
> Bill Dossett
>
> Virtualisation Architect
>
>
> Pitney Bowes – Tech Central
>
> 6 Hercules Way, 600 Leavesden Park
>
> Watford, WD25 7GS
>
>
> Phone(+44) (0)1923 279353 | VOIP: 54739353
>
> Mobile(+44) (0)7775 908612
>
>
> bill.doss...@pb.com
>
> www.pb.com
>
>
>
> In Engineering?Raise a ticket via Remedy Anywhere [HERE]takes less
> than a minute
>
>
>
>
>
> ManageIQ User Guide available [HERE]
>
>
>
> Check out the ManageIQ Blog for recent enhancements and information
> [HERE]
>
>
>
>
>
>
>
>
> __
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status

2014-09-19 Thread Jorick Astrego



On 09/19/2014 11:37 AM, Dan Kenigsberg wrote:

On Fri, Sep 19, 2014 at 09:54:00AM +0200, Sandro Bonazzola wrote:

Hi,
We are going to start composing oVirt 3.5.0 GA (or RC3, depending on Monday 
morning Go / No go Meeting decisions) on Monday 2014-09-22.

Maintainers:
- Please be sure that 3.5 snapshot satisfy release criteria[9]
- Please be sure that no pending patches are going to block the release
- If any patch must block the GA release please raise the issue as soon as 
possible.
- If any packages need a rebase please raise the issue as soon as possible.
- Be aware that packages that doesn't need a rebase must be re-built with final 
release versioning from the RC2 tag.

The bug tracker [1] shows the following proposed blockers to be reviewed:

Bug ID  Whiteboard  Status  Summary
1144079 integration POSTlocal engine-reports-setup does not write conf 
file to allow accessing reports from engine
1138340 sla POSTvdsm relies on unsupported 'min_guarantee' VM 
configuration parameter

I've just merged the last patch by Martin Sivak to fix this issue. It
should be solved on vdsm GA's build.


1143873 network NEW firewall-cmd gets stuck when run as superVDSM 
subsubprocess

I've removed the above from the blocker. This issue has been
release-noted in
http://www.ovirt.org/OVirt_3.5_Release_Notes#Fedora_and_EL7_hosts and
should be solved on selinux.


Hi,

I'm reading the Networking part for EL7 host and see puppet doesn't 
support masking/unmasking services yet:


https://tickets.puppetlabs.com/browse/PUP-1253

As we're using The Foreman to deploy the hosts this would be nice.

I have lots of ways to execute the "systemctl mask" command off course, 
but can people please help by voting for it?

It's not on their radar as something important it appears.

Kind regards,

Jorick Astrego
Netbulae B.V.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status

2014-09-19 Thread Dan Kenigsberg

On Fri, Sep 19, 2014 at 09:54:00AM +0200, Sandro Bonazzola wrote:
> Hi,
> We are going to start composing oVirt 3.5.0 GA (or RC3, depending on Monday 
> morning Go / No go Meeting decisions) on Monday 2014-09-22.
> 
> Maintainers:
> - Please be sure that 3.5 snapshot satisfy release criteria[9]
> - Please be sure that no pending patches are going to block the release
> - If any patch must block the GA release please raise the issue as soon as 
> possible.
> - If any packages need a rebase please raise the issue as soon as possible.
> - Be aware that packages that doesn't need a rebase must be re-built with 
> final release versioning from the RC2 tag.
> 
> The bug tracker [1] shows the following proposed blockers to be reviewed:
> 
> Bug IDWhiteboard  Status  Summary
> 1144079   integration POSTlocal engine-reports-setup does not 
> write conf file to allow accessing reports from engine
> 1138340   sla POSTvdsm relies on unsupported 
> 'min_guarantee' VM configuration parameter

I've just merged the last patch by Martin Sivak to fix this issue. It
should be solved on vdsm GA's build.

> 1143873   network NEW firewall-cmd gets stuck when run as 
> superVDSM subsubprocess

I've removed the above from the blocker. This issue has been
release-noted in
http://www.ovirt.org/OVirt_3.5_Release_Notes#Fedora_and_EL7_hosts and
should be solved on selinux.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] which network guest driver for kernel 2.6.17

2014-09-19 Thread Antoni Segura Puimedon



- Original Message -
> From: "ml ml" 
> To: users@ovirt.org
> Sent: Thursday, September 18, 2014 10:56:51 PM
> Subject: [ovirt-users] which network guest driver for kernel 2.6.17
> 
> Hello List,
> 
> i would like to use kernel 2.6.17 for a guest.
> 
> Which network driver do i need for this?
> 
> I have only seen the the ovirt network driver stuff in recent kernel.

I'd use the rtl8139

> 
> Thanks,
> Mario
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] console spice questions

2014-09-19 Thread David Jaša

Hi Bill,

Yes, the document is already dated. Lately, you don't have to go through
the hoops needed to make spice-x work. Even if you can get it, it will
only work for you in IE < 11. You should instead just install
virt-viewer [1] and the consoles should Just Work for you using the
Natice Client (.vv file) method.

David

[1] http://virt-manager.org/download/


On Fri, 2014-09-19 at 07:20 +, Bill Dossett wrote:
> Hi
> 
>  
> 
> After setting up an ovirt cluster with 4 hosts and getting my
> networking and vlans all connected I’m pretty impressed with ovirt.  I
> am however not too impressed with trying to actually get a console
> into a VM.  I’m not sure why this isn’t included in the ovirt engine
> to begin with as console access to actually configure a VM to make
> templates of seems a pretty basic tenant of virtualisation. 
> 
>  
> 
> Anyway, I am following the guide
> http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal  and
> trying to download spice.cab to follow the rather long procedure to
> install, however the link on that page gives a 404 page not found
> error.  Could someone point me to the actual download?  Is this
> document perhaps outdated and I am following the wrong path?
> 
>  
> 
> Thanks
> 
>  
> 
> Bill Dossett
> 
> Virtualisation Architect
> 
> 
> Pitney Bowes – Tech Central
> 
> 6 Hercules Way, 600 Leavesden Park
> 
> Watford, WD25 7GS
> 
> 
> Phone(+44) (0)1923 279353 | VOIP: 54739353
> 
> Mobile(+44) (0)7775 908612
> 
> 
> bill.doss...@pb.com
> 
> www.pb.com 
> 
>  
> 
> In Engineering?Raise a ticket via Remedy Anywhere [HERE]takes less
> than a minute
> 
> 
> 
>  
> 
> ManageIQ User Guide available [HERE]
> 
>  
> 
> Check out the ManageIQ Blog for recent enhancements and information
> [HERE]
> 
>  
> 
>  
> 
> 
> 
> 
> __
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status

2014-09-19 Thread Sandro Bonazzola

Hi,
We are going to start composing oVirt 3.5.0 GA (or RC3, depending on Monday 
morning Go / No go Meeting decisions) on Monday 2014-09-22.

Maintainers:
- Please be sure that 3.5 snapshot satisfy release criteria[9]
- Please be sure that no pending patches are going to block the release
- If any patch must block the GA release please raise the issue as soon as 
possible.
- If any packages need a rebase please raise the issue as soon as possible.
- Be aware that packages that doesn't need a rebase must be re-built with final 
release versioning from the RC2 tag.

The bug tracker [1] shows the following proposed blockers to be reviewed:

Bug ID  Whiteboard  Status  Summary
1144079 integration POSTlocal engine-reports-setup does not write conf 
file to allow accessing reports from engine
1138340 sla POSTvdsm relies on unsupported 'min_guarantee' VM 
configuration parameter
1143873 network NEW firewall-cmd gets stuck when run as superVDSM 
subsubprocess
1142256 integration NEW remote engine-reports-setup does not write conf 
file to allow accessing reports from engine


And the following dependencies still open:
Bug 1041569 - [NFR] libvirt: Returning the watermark for all the images opened 
for writing

The following bugs are keyworded as Regression and not marked as blockers[10]

Bug ID  Whiteboard  Status  Summary
1142709 infra   NEW Trying to deploy hosted-engine via iSCSI device fails
1138144 storage NEW Failed to autorecover storage domain after unblocking 
connection with host
1118349 storage NEW [vdsm] Creating DataCenter 3.5 using master domain V1 
fails with InquireNotSupportedError
1110444 ux  POSTbookmark selection does not work on first try
1138314 virtNEW Fail to start vm with payload.


Feature freeze is now effective, and branch has been created.
All new patches must be backported to 3.5 branch too.
Features completed are marked in green on Features Status Table [2]

There are still 86 bugs [3] targeted to 3.5.0.
Excluding node and documentation bugs we still have 62 bugs [4] targeted to 
3.5.0.

More in detail [5]:

Whiteboard  NEW ASSIGNEDPOSTTotal
docs13  1   0   14
gluster 8   4   2   14
i18n0   0   1   1
infra   0   1   2   3
integration 3   1   2   6
network 0   1   0   1
node7   4   0   11
ppc 2   0   4   6
sla 12  0   7   19
virt8   0   3   11
Total   53  12  21  86



Maintainers / Assignee:
- Please ensure that completed features are marked in green on Features Status 
Table [2]
- If you find a blocker bug please remember to add it to the tracker [1]
- Please fill release notes, the page has been created here [6]
- Please review results from Third Test Day on the etherpad [7] and on the 
mailing lists
- Please update the target to 3.5.1 or later for bugs that won't be in 3.5.0:
  it will ease gathering the blocking bugs for next releases.

Community:
- You're welcome to join us testing last release candidate or nightly builds 
and getting involved in oVirt Quality Assurance[8]

[1] http://bugzilla.redhat.com/1073943
[2] http://goo.gl/4SuYdE
[3] http://red.ht/1pVEk7H
[4] http://red.ht/1zT2mSq
[5] http://red.ht/1q7SqNL
[6] http://www.ovirt.org/OVirt_3.5_Release_Notes
[7] http://etherpad.ovirt.org/p/3.5-testday-3
[8] http://www.ovirt.org/OVirt_Quality_Assurance
[9] http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria_.28WIP.29
[10] http://goo.gl/uavikG

Thanks,

-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] console spice questions

2014-09-19 Thread Bill Dossett

Hi

After setting up an ovirt cluster with 4 hosts and getting my networking and 
vlans all connected I'm pretty impressed with ovirt.  I am however not too 
impressed with trying to actually get a console into a VM.  I'm not sure why 
this isn't included in the ovirt engine to begin with as console access to 
actually configure a VM to make templates of seems a pretty basic tenant of 
virtualisation.

Anyway, I am following the guide 
http://www.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal  and trying to 
download spice.cab to follow the rather long procedure to install, however the 
link on that page gives a 404 page not found error.  Could someone point me to 
the actual download?  Is this document perhaps outdated and I am following the 
wrong path?

Thanks

Bill Dossett
Virtualisation Architect

Pitney Bowes - Tech Central
6 Hercules Way, 600 Leavesden Park
Watford, WD25 7GS

Phone (+44) (0)1923 279353 | VOIP: 54739353
Mobile (+44) (0)7775 908612

bill.doss...@pb.com
www.pb.com

In Engineering? Raise a ticket via Remedy Anywhere 
[HERE]
 takes less than a minute


ManageIQ User Guide available 
[HERE]

Check out the ManageIQ Blog for recent enhancements and information 
[HERE]





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Sealing a CentOS-7 Guest as a oVirt Template

2014-09-19 Thread Sven Kieske

On 18/09/14 19:41, Christian Rebel wrote:
> Hello all,
> 
>  
> 
> What is the recommended way to make an oVirt Template from a CentOS-7 Guest?
> 
>  
> 
> Previously on CentOS-6 I used "sys-unconfig" or "touch /.unconfigured", but
> this is on CentOS-7 no longer possible.
> 
> I can use on CentOS-7 the "nmtui" after the OS is loaded, but maybe someone
> knows a way to run it during the boot sequence.
> 
I'd recommend cloud-init for configuration-data.
I have my own custom scripts as most solutions available clean not
everything up you might want to have cleaned (logs, ssh keys, etc).
HTH

-- 
Mit freundlichen Grüßen / Regards

Sven Kieske

Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] OVIRT-3.5-TEST-DAY-3: CPU SLA for capping

2014-09-19 Thread Martin Perina

Hi,

I tested the support to limit CPU utilization of hosts. Setting it up
in the GUI worked correctly, but for running VM settings are ignored.
I used XMLRPC protocol to avoid [1]. To simulate VM CPU utilization
I used stress tool [2].

Testing steps:

1. Create a VM with the same number of CPUs as Host
2. Create CPU type QoS in DC and set the limit to desired value
3. In Cluster create new CPU profile with above QoS and remove the default CPU 
profile
4. Start the VM and execute (N is a number of CPUs in VM)
   stress --cpu N
5. Connect to Host and execute
   sar -u 1 10


No matter what the limit was set to (1, 50, 100), host CPUs were always 
utilized to 100%.
So I create bug to cover this [3].

Martin Perina


[1] http://bugzilla.redhat.com/1142851
[2] http://people.seas.harvard.edu/~apw/stress/
[3] http://bugzilla.redhat.com/1144280
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Admin console - Always show advanced options

Re: [ovirt-users] Admin console - Always show advanced options

Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status

[ovirt-users] How to increase detail in displayed reports

Re: [ovirt-users] hosted engine setup on second host fails

Re: [ovirt-users] Admin console - Always show advanced options

[ovirt-users] hosted engine setup on second host fails

Re: [ovirt-users] console spice questions

Re: [ovirt-users] console spice questions

Re: [ovirt-users] console spice questions

Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status

Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.0 status

Re: [ovirt-users] which network guest driver for kernel 2.6.17

Re: [ovirt-users] console spice questions

[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status

[ovirt-users] console spice questions

Re: [ovirt-users] Sealing a CentOS-7 Guest as a oVirt Template

[ovirt-users] OVIRT-3.5-TEST-DAY-3: CPU SLA for capping

18 matches

Site Navigation

Mail list logo

Footer information