[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
Hi, We're going to start composing oVirt 3.5.1 RC on *2014-12-02 08:00 UTC* from 3.5 branch. In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. The bug tracker [1] shows 3 open blocker: Bug ID Whiteboard Status Summary 1162640 gluster POSTsupervdsm segfault in libgfapi while querying volume status detail 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile 1159839 storage POSTNew FC LUNs are not detected on hypervisor without a reboot The following bugs have been keyworded as Regression and not marked as blockers: Bug ID Whiteboard Status Target Summary 1160846 sla NEW --- Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile 1118349 storage NEW 3.5.1 [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2014-12-01 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-12-01 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. - Please provide an ETA for the pending blockers as soon as possible. Infra: - Please check Jenkins status for 3.5 jobs and sync with relevant maintainers if there are issues. There are still 98 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 71 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please review bugs marked as Regression and add to blocker if they're real regressions. - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] DataCenters/QoS/CPU
You need to specify limit for host cpu loading in %, so if you want that your vm will not utilize more than 30% of host cpu you need to put this value to 30. Thanks - Original Message - From: Luciano Giacchetta luciano.giacche...@osit.com.ar To: users@ovirt.org Sent: Tuesday, November 25, 2014 5:47:17 PM Subject: [ovirt-users] DataCenters/QoS/CPU Hello, I want to implement a new CPU QoS but i don't know what data needs in Limit: field. I saw this page, http://www.ovirt.org/Features/CPU_SLA but as i can see it only reference to http://libvirt.org/formatdomain.html#elementsCPUTuning Does Limit field need to be filled with some options from cputune? Is there some related information? Ovirt: 3.5.1 Centos: 6.6 Regards, -- Luciano Giacchetta | Tecnología Informática +Linea: +54 (11) 6091 7601 +iNum: +883 510 009 903 145 +eMail: luciano.giacche...@osit.com.ar +Site: http://www.osit.com.ar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Hi, Release criteria discussion started on 2014-10-22 and will end today 2014-11-26 as discussed in last oVirt sync meeting [1]. If no objections will be raised, the proposed changes [2] will be accepted. Release management for 3.6.0 has been created [3] The key milestones for this release must be scheduled: Key Milestones Release criteria discussion start: 2014-10-22 Release criteria ready: 2014-11-26 Feature freeze: 60 Days before release First Test Day: 45 days before release Release Candidate: 30 days before release Release: 6 months after oVirt 3.5.0 release External Project Schedules Fedora 21: 2014-12-09 Fedora 22: 2015-XX-XX GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 Two different proposals have been made about above scheduling [4]: 1) extend the cycle to 10 months for allowing to include a large feature set 2) reduce the cycle to less than 6 months and split features over 3.6 and 3.7 Feature proposed for 3.6.0 must now be collected in the 3.6 google doc [8] and reviewed by maintainers. A tracker bug for 3.6.0 has been created [5] and currently shows no blockers. There are 439 bugs [6] targeted to 3.6.0. Excluding node and documentation bugs we have 419 bugs [7] targeted to 3.6.0. [1] http://resources.ovirt.org/meetings/ovirt/2014/ovirt.2014-11-19-15.01.log.html [2] http://lists.ovirt.org/pipermail/devel/2014-September/008695.html [3] http://www.ovirt.org/OVirt_3.6_Release_Management [4] http://lists.ovirt.org/pipermail/users/2014-November/028875.html [5] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [6] http://goo.gl/zwkF3r [7] http://goo.gl/ZbUiMc [8] http://goo.gl/9X3G49 -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
On 26/11/14 09:31, Sandro Bonazzola wrote: If no objections will be raised, the proposed changes [2] will be accepted. I fear I got an objection: quote: * Alpha release should come after feature freeze Nothing more to say about it I really think you are twisting the way what is commonly known as an alpha: from wikipedia: [..]The alpha phase usually **ends** with a feature freeze[..] https://en.wikipedia.org/wiki/Alpha_software#Alpha emphasis added by me. you are doing it the wrong way: first release an alpha, than make a feature freeze. _After_ feature freeze you can release a beta. I really like this terminology and think it is commonly known and accepted and it works very well. thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Master Storage Domain fails to activate
- Original Message - From: Eli Mesika emes...@redhat.com To: Nathan Llaneza ntllaneza...@gmail.com Cc: users users@ovirt.org Sent: Tuesday, November 25, 2014 9:48:05 PM Subject: Re: [ovirt-users] Master Storage Domain fails to activate - Original Message - From: Nathan Llaneza ntllaneza...@gmail.com To: users users@ovirt.org Sent: Monday, November 24, 2014 4:18:48 PM Subject: [ovirt-users] Master Storage Domain fails to activate Hello All, I am running oVirt 3.4.4 in my datacenter. Over the weekend the datacenter completely lost power. I have brought all the hypervisor back online; however it will not bring the Master storage domain back online. Just to rule out a few issues I have * stopped iptables on the storage domains * verified that each hypervisor has mounted all of the storage domains (using the mount command from a ssh session) * mounted the storage domains individually from the engine I don't think that it is a connection issue, but rather a data corruption issue. I could use a little help interpreting the log files. Thank you. From the engine log it really seems that master SD is corrupted , CC'ing Allon M who is in charge of the storage team in order to get more direction how to recover from that ... Hi Nathan, please attach also the vdsm logs from the hosts. also, please check the storage access from the hosts and what's under the domain dirs - for example the domain under 172.16.241.98:/mnt/storage (1c4abda0-906b-4faf-a2e3-b6683729cc2f) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Il 26/11/2014 09:50, Sven Kieske ha scritto: On 26/11/14 09:31, Sandro Bonazzola wrote: If no objections will be raised, the proposed changes [2] will be accepted. I fear I got an objection: quote: * Alpha release should come after feature freeze Nothing more to say about it I really think you are twisting the way what is commonly known as an alpha: from wikipedia: [..]The alpha phase usually **ends** with a feature freeze[..] https://en.wikipedia.org/wiki/Alpha_software#Alpha emphasis added by me. you are doing it the wrong way: first release an alpha, than make a feature freeze. _After_ feature freeze you can release a beta. The alpha phase usually ends with a feature freeze, indicating that no more features will be added to the software. At this time, the software is said to be **feature complete**. So if you mean alpha release requirements are: substantially complete and in a testable state enabled by default -- if so specified by the change And for feature freeze you mean: no more changes in the feature because the feature is complete I agree with you, feature freeze must be after alpha. what I was trying to describe with having feature freeze before alpha is that we must not have features included in the alpha release which are: - not substantially complete - not in a testable state such kind of features must not be in alpha release. I really like this terminology and think it is commonly known and accepted and it works very well. thoughts? -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ovirt 3.5 Bug !!!!!!!!!!!!!!!!!!
Hello, - Firstly, I don't know how this setup could have worked before 3.5 :) Could you try two tests? 1, Can you ping the kvm04... machine from your clients machine (in one of these vlans)? 2, Can you telnet to spice server on kvm04? (start spice console on some VM on kvm04, download console.vv file, telnet to host:port from the console.vv file). Does this work? I don't think 2, will work because spice server listens on the display network interface (which is unaccessible from clients), but let's try it anyway. - Also, are you sure your firewall is set up correctly and doesn't block spice ports? - Another thing: didn't you use spice proxy in your previous setup? Thanks, F. - Original Message - From: PaulCheung eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: users@ovirt.org Sent: Wednesday, November 26, 2014 2:53:33 AM Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! It solved the host=kvm0x..com problem, But my guest still can't open the VM!!! User from D E, can't start the VM, except ovirt managerment network What should I do ? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Tue, 25 Nov 2014 11:26:06 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: users@ovirt.org Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! I'm not really sure if this the intended way to achieve customer separation. I don't know this field well, so I need to talk about it with my colleagues from networking team. Meanwhile you can try overriding your display address on host level like this: 1, In hosts subtab, edit host. 2, In the dialog select console. 3, Check 'Override display address', fill in corresponding host name (in your case kvm01.allwinnertech.com for host kvm01, kvm02.allwinnertech.com for kvm02 host etc) - do this for every host in the cluster. This should force returning hostnames in the .vv file. Cheers, Franta. - Original Message - From: LazyPaul eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: users@ovirt.org Sent: Tuesday, November 25, 2014 3:51:27 PM Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! My network is look like this: 3 vlan, they can’t visit each other, so I have 3 dns server, The console.vv file in the ovirt 3.4 the host = kvm01.allwinnertech.com after update to 3.5 the host = 172.16.1.115, this cause the VLAN 101 vlan 102 user can’t open 172.16.1.115, It should be :host =kvm01.allwinnertech.com --- Server management network: VLAN 100 kvm01.allwinnertech.com http://kvm01.allwinnertech.com/ 172.16.1.115 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 172.16.1.116 kvm03 1.117kvm04 1.120 DNS server: 172.16.1.2 --- Company A user: VLAN 101 kvm01.allwinertech.com http://kvm01.allwinertech.com/ 192.168.200.1 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 192.168.200.2 kvm02 200.3 kvm04… 200.4 DNS Server 192.168.200.254 --- Company B user: VLAN 102 kvm01.allwinnertech.com http://kvm01.allwinnertech.com/ 192.168. 100.1 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 192.168.100.2 kvm02… 100.3 kvm04 100.4 DNS Server 192.168.100.254 --- 在 2014年11月25日，下午10:08，Frantisek Kobzik fkob...@redhat.com 写道： Hi, I'd like to ask you about two things: 1, Do you have display address overriden on cluster level? (clusters maintab) 2, Do you have display network defined on your hosts? or are you using management network for everything? Thanks, Franta. - Original Message - From: PaulCheung eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: users@ovirt.org Sent: Tuesday, November 25, 2014 10:55:03 AM Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Dear all , I am very thank you for your job!150 users from China waiting for your good news! Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Tue, 25 Nov 2014 04:46:01 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: users@ovirt.org Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! I'm gonna take a closer look at
Re: [ovirt-users] 答复: Ovirt 3.5 Bug !!!!!!!!!!!!!!!!!!
Hi, I don't think multiple display network is possible within single cluster. How would engine know which is the correct one for given client? Also that would mean vdsm would have to start spice server on multiple interfaces and I believe it's not capable of this. But maybe I'm missing something. I'll try adding Lior from networking team. Lior, can you take a quick glance on this thread? Thanks! Franta. - Original Message - From: PaulCheung eq2...@msn.com To: Chao Xie xiec.f...@cn.fujitsu.com Cc: users@ovirt.org Sent: Wednesday, November 26, 2014 6:19:43 AM Subject: Re: [ovirt-users] 答复: Ovirt 3.5 Bug !! JUST PS. What I mean is if they make it into checkbox, it would sloved my problem. Sorry for my poor English! Sincerely yours, PaulCheung tel: 180-8882-7173 From: xiec.f...@cn.fujitsu.com To: eq2...@msn.com Subject: 答复: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 05:15:22 + Hi, Paul Did you change the code and let the “Migration Display” to checkbox ?Or just use PS to change the photo? 发件人 : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 代表 PaulCheung 发送时间 : 2014 年 11 月 26 日 11:27 收件人 : Frantisek Kobzik 抄送 : users@ovirt.org 主题 : Re: [ovirt-users] Ovirt 3.5 Bug !! Dear ALL, Can this turn into a multichoose box ? I need to display in all network interface!!! This can solve my problem now. Thank you very much! Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 10:55:44 +0800 Is there because the Display Network problem cause other network can not display ? How to enable all network's Display ? Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 09:53:33 +0800 It solved the host=kvm0x..com problem, But my guest still can't open the VM!!! User from D E, can't start the VM, except ovirt managerment network What should I do ? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Tue, 25 Nov 2014 11:26:06 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: users@ovirt.org Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! I'm not really sure if this the intended way to achieve customer separation. I don't know this field well, so I need to talk about it with my colleagues from networking team. Meanwhile you can try overriding your display address on host level like this: 1, In hosts subtab, edit host. 2, In the dialog select console. 3, Check 'Override display address', fill in corresponding host name (in your case kvm01.allwinnertech.com for host kvm01, kvm02.allwinnertech.com for kvm02 host etc) - do this for every host in the cluster. This should force returning hostnames in the .vv file. Cheers, Franta. - Original Message - From: LazyPaul eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: users@ovirt.org Sent: Tuesday, November 25, 2014 3:51:27 PM Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! My network is look like this: 3 vlan, they can ’ t visit each other, so I have 3 dns server, The console.vv file in the ovirt 3.4 the host = kvm01.allwinnertech.com after update to 3.5 the host = 172.16.1.115, this cause the VLAN 101 vlan 102 user can ’ t open 172.16.1.115, It should be : host =kvm01.allwinnertech.com --- Server management network: VLAN 100 kvm01.allwinnertech.com http://kvm01.allwinnertech.com/ 172.16.1.115 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 172.16.1.116 kvm03 1.117 kvm04 1.120 DNS server: 172.16.1.2 --- Company A user: VLAN 101 kvm01.allwinertech.com http://kvm01.allwinertech.com/ 192.168.200.1 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 192.168.200.2 kvm02 200.3 kvm04 … 200.4 DNS Server 192.168.200.254 --- Company B user: VLAN 102 kvm01.allwinnertech.com http://kvm01.allwinnertech.com/ 192.168. 100.1 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 192.168.100.2 kvm02 … 100.3 kvm04 100.4 DNS Server
[ovirt-users] what should be the output of the default iptables rules?
Hello, I was playing with custom iptables rules and something went wrong. Now my *engine-config -g IPTablesConfig* is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 答复: Ovirt 3.5 Bug !!!!!!!!!!!!!!!!!!
Except the display network, other network user can't telnet the 59xx spice port. I guess because the spice portonly listening in this display network. But, all spice port can listening in all network interface in 0virt 3.4, why Ovirt 3.5 not provide this ? If I can't choose more than one network to display the spice port oVirt 3.5 , is there a way for me to down grade to oVirt 3.4? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Wed, 26 Nov 2014 04:37:39 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: xiec.f...@cn.fujitsu.com; users@ovirt.org; lver...@redhat.com Subject: Re: [ovirt-users] 答复: Ovirt 3.5 Bug !! Hi, I don't think multiple display network is possible within single cluster. How would engine know which is the correct one for given client? Also that would mean vdsm would have to start spice server on multiple interfaces and I believe it's not capable of this. But maybe I'm missing something. I'll try adding Lior from networking team. Lior, can you take a quick glance on this thread? Thanks! Franta. - Original Message - From: PaulCheung eq2...@msn.com To: Chao Xie xiec.f...@cn.fujitsu.com Cc: users@ovirt.org Sent: Wednesday, November 26, 2014 6:19:43 AM Subject: Re: [ovirt-users] 答复: Ovirt 3.5 Bug !! JUST PS. What I mean is if they make it into checkbox, it would sloved my problem. Sorry for my poor English! Sincerely yours, PaulCheung tel: 180-8882-7173 From: xiec.f...@cn.fujitsu.com To: eq2...@msn.com Subject: 答复: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 05:15:22 + Hi, Paul Did you change the code and let the “Migration Display” to checkbox ?Or just use PS to change the photo? 发件人 : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 代表 PaulCheung 发送时间 : 2014 年 11 月 26 日 11:27 收件人 : Frantisek Kobzik 抄送 : users@ovirt.org 主题 : Re: [ovirt-users] Ovirt 3.5 Bug !! Dear ALL, Can this turn into a multichoose box ? I need to display in all network interface!!! This can solve my problem now. Thank you very much! Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 10:55:44 +0800 Is there because the Display Network problem cause other network can not display ? How to enable all network's Display ? Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 09:53:33 +0800 It solved the host=kvm0x..com problem, But my guest still can't open the VM!!! User from D E, can't start the VM, except ovirt managerment network What should I do ? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Tue, 25 Nov 2014 11:26:06 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: users@ovirt.org Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! I'm not really sure if this the intended way to achieve customer separation. I don't know this field well, so I need to talk about it with my colleagues from networking team. Meanwhile you can try overriding your display address on host level like this: 1, In hosts subtab, edit host. 2, In the dialog select console. 3, Check 'Override display address', fill in corresponding host name (in your case kvm01.allwinnertech.com for host kvm01, kvm02.allwinnertech.com for kvm02 host etc) - do this for every host in the cluster. This should force returning hostnames in the .vv file. Cheers, Franta. - Original Message - From: LazyPaul eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: users@ovirt.org Sent: Tuesday, November 25, 2014 3:51:27 PM Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! My network is look like this: 3 vlan, they can ’ t visit each other, so I have 3 dns server, The console.vv file in the ovirt 3.4 the host = kvm01.allwinnertech.com after update to 3.5 the host = 172.16.1.115, this cause the VLAN 101 vlan 102 user can ’ t open 172.16.1.115, It should be : host =kvm01.allwinnertech.com --- Server management network: VLAN 100
Re: [ovirt-users] what should be the output of the default iptables rules?
What version do you use? - Original Message - From: Arman Khalatyan arm2...@gmail.com To: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:00:10 PM Subject: [ovirt-users] what should be the output of the default iptables rules? Hello, I was playing with custom iptables rules and something went wrong. Now my engine-config -g IPTablesConfig is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] what should be the output of the default iptables rules?
Sorry forgot to mention: Centos 6.6 ovirt 3.5.x, glusterfs 3.6.x, Storage type is iscsi *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:13 AM, Alon Bar-Lev alo...@redhat.com wrote: What version do you use? - Original Message - From: Arman Khalatyan arm2...@gmail.com To: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:00:10 PM Subject: [ovirt-users] what should be the output of the default iptables rules? Hello, I was playing with custom iptables rules and something went wrong. Now my engine-config -g IPTablesConfig is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] what should be the output of the default iptables rules?
You can look within /usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/_config.sql for last instance of the value you seek (in most cases). IPTablesConfig: --- # oVirt default firewall configuration. Automatically generated by vdsm bootstrap script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT # vdsm -A INPUT -p tcp --dport @VDSM_PORT@ -j ACCEPT # SSH -A INPUT -p tcp --dport @SSH_PORT@ -j ACCEPT # snmp -A INPUT -p udp --dport 161 -j ACCEPT @CUSTOM_RULES@ # Reject any other input traffic -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited COMMIT --- - Original Message - From: Arman Khalatyan arm2...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:17:18 PM Subject: Re: [ovirt-users] what should be the output of the default iptables rules? Sorry forgot to mention: Centos 6.6 ovirt 3.5.x, glusterfs 3.6.x, Storage type is iscsi *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:13 AM, Alon Bar-Lev alo...@redhat.com wrote: What version do you use? - Original Message - From: Arman Khalatyan arm2...@gmail.com To: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:00:10 PM Subject: [ovirt-users] what should be the output of the default iptables rules? Hello, I was playing with custom iptables rules and something went wrong. Now my engine-config -g IPTablesConfig is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Gluster command [UNKNOWN] failed on server...
Is there any one can help on this ??
Thanks,
punit
On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal hypu...@gmail.com wrote:
Hi,
My Glusterfs version is :- glusterfs-3.6.1-1.el7
On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy kmayi...@redhat.com
wrote:
[+gluster-us...@gluster.org]
Initialization of volume 'management' failed, review your volfile
again, glusterd throws this error when the service is started
automatically after the reboot. But the service is successfully started
later manually by the user.
can somebody from gluster-users please help on this?
glusterfs version: 3.5.1
Thanks,
Kanagaraj
- Original Message -
From: Punit Dambiwal hypu...@gmail.com
To: Kanagaraj kmayi...@redhat.com
Cc: users@ovirt.org
Sent: Tuesday, November 25, 2014 7:24:45 PM
Subject: Re: [ovirt-users] Gluster command [UNKNOWN] failed on
server...
Hi Kanagraj,
Please check the attached log filesi didn't find any thing
special
On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj kmayi...@redhat.com
wrote:
Do you see any errors in
/var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log when the
service is trying to start automatically after the reboot?
Thanks,
Kanagaraj
On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
Hi Kanagaraj,
Yes...once i will start the gluster service and then vdsmd ...the
host
can connect to cluster...but the question is why it's not started
even it
has chkconfig enabled...
I have tested it in two host cluster environment...(Centos 6.6 and
centos 7.0) on both hypervisior cluster..it's failed to reconnect in
to
cluster after reboot
In both the environment glusterd enabled for next bootbut it's
failed with the same errorseems it's bug in either gluster or
Ovirt ??
Please help me to find the workaround here if can not resolve it...as
without this the Host machine can not connect after rebootthat
means
engine will consider it as down and every time need to manually start
the
gluster service and vdsmd... ??
Thanks,
Punit
On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj kmayi...@redhat.com
wrote:
From vdsm.log error: Connection failed. Please check if gluster
daemon
is operational.
Starting glusterd service should fix this issue. 'service glusterd
start'
But i am wondering why the glusterd was not started automatically
after
the reboot.
Thanks,
Kanagaraj
On 11/24/2014 07:18 PM, Punit Dambiwal wrote:
Hi Kanagaraj,
Please find the attached VDSM logs :-
Thread-13::DEBUG::2014-11-24
21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-13::DEBUG::2014-11-24
21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting False
Thread-13::DEBUG::2014-11-24
21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state init
-
state preparing
Thread-13::INFO::2014-11-24
21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and protect:
repoStats(options=None)
Thread-13::INFO::2014-11-24
21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and protect:
repoStats, Return response: {}
Thread-13::DEBUG::2014-11-24
21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
Thread-13::DEBUG::2014-11-24
21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state
preparing
-
state finished
Thread-13::DEBUG::2014-11-24
21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
Owner.releaseAll requests {} resources {}
Thread-13::DEBUG::2014-11-24
21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-13::DEBUG::2014-11-24
21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting False
Thread-13::DEBUG::2014-11-24
21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client
[10.10.10.2]::call
getCapabilities with () {}
Thread-13::DEBUG::2014-11-24
21:41:41,553::utils::738::root::(execCmd)
/sbin/ip route show to 0.0.0.0/0 table all (cwd None)
Thread-13::DEBUG::2014-11-24
21:41:41,560::utils::758::root::(execCmd)
SUCCESS: err = ''; rc = 0
Thread-13::DEBUG::2014-11-24
21:41:41,588::caps::728::root::(_getKeyPackages) rpm package
('gluster-swift',) not found
Thread-13::DEBUG::2014-11-24
21:41:41,592::caps::728::root::(_getKeyPackages) rpm package
('gluster-swift-object',) not found
Thread-13::DEBUG::2014-11-24
21:41:41,593::caps::728::root::(_getKeyPackages) rpm package
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
I'm not 100% sure if I understand your definitions: On 26/11/14 10:26, Sandro Bonazzola wrote: The alpha phase usually ends with a feature freeze, indicating that no more features will be added to the software. At this time, the software is said to be **feature complete**. So if you mean alpha release requirements are: substantially complete and in a testable state enabled by default -- if so specified by the change ??? I define an alpha release as the following: features may get added or removed during alpha cycle, of course you can add your own policy about which features you accept. And for feature freeze you mean: no more changes in the feature because the feature is complete I agree with you, feature freeze must be after alpha. no. feature freeze means exactly that: no more new features are accepted, after feature freeze. after feature freeze the accepted features stabilize in the beta phase, you just fix bugs. what I was trying to describe with having feature freeze before alpha is that we must not have features included in the alpha release which are: - not substantially complete - not in a testable state you should not call this feature freeze as this is not what is commonly understood (imho) when you talk about feature freeze (see my explanation above). You might want to call this feature acceptance criteria or something like that, at least it would be more clear (to me) what you mean. HTH -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Il 26/11/2014 11:45, Sven Kieske ha scritto: I'm not 100% sure if I understand your definitions: On 26/11/14 10:26, Sandro Bonazzola wrote: The alpha phase usually ends with a feature freeze, indicating that no more features will be added to the software. At this time, the software is said to be **feature complete**. So if you mean alpha release requirements are: substantially complete and in a testable state enabled by default -- if so specified by the change ??? I define an alpha release as the following: features may get added or removed during alpha cycle, of course you can add your own policy about which features you accept. And for feature freeze you mean: no more changes in the feature because the feature is complete I agree with you, feature freeze must be after alpha. no. feature freeze means exactly that: no more new features are accepted, after feature freeze. after feature freeze the accepted features stabilize in the beta phase, you just fix bugs. what I was trying to describe with having feature freeze before alpha is that we must not have features included in the alpha release which are: - not substantially complete - not in a testable state you should not call this feature freeze as this is not what is commonly understood (imho) when you talk about feature freeze (see my explanation above). You might want to call this feature acceptance criteria or something like that, at least it would be more clear (to me) what you mean. make sense, well, since it's a milestone, maybe better something like feature acceptance review HTH -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] what should be the output of the default iptables rules?
Thanks! So As I undertand it correctly the @CUSTOM_RULES@ will be overridden by engine-config --set IPTablesConfigSiteCustom=? *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:24 AM, Alon Bar-Lev alo...@redhat.com wrote: You can look within /usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/_config.sql for last instance of the value you seek (in most cases). IPTablesConfig: --- # oVirt default firewall configuration. Automatically generated by vdsm bootstrap script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT # vdsm -A INPUT -p tcp --dport @VDSM_PORT@ -j ACCEPT # SSH -A INPUT -p tcp --dport @SSH_PORT@ -j ACCEPT # snmp -A INPUT -p udp --dport 161 -j ACCEPT @CUSTOM_RULES@ # Reject any other input traffic -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited COMMIT --- - Original Message - From: Arman Khalatyan arm2...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:17:18 PM Subject: Re: [ovirt-users] what should be the output of the default iptables rules? Sorry forgot to mention: Centos 6.6 ovirt 3.5.x, glusterfs 3.6.x, Storage type is iscsi *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:13 AM, Alon Bar-Lev alo...@redhat.com wrote: What version do you use? - Original Message - From: Arman Khalatyan arm2...@gmail.com To: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:00:10 PM Subject: [ovirt-users] what should be the output of the default iptables rules? Hello, I was playing with custom iptables rules and something went wrong. Now my engine-config -g IPTablesConfig is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Yair Zaslavsky yzasl...@redhat.com, Ondra Machacek
omach...@redhat.com, alo...@redhat.com,
users@ovirt.org
Sent: Wednesday, November 26, 2014 1:01:37 PM
Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello everybody,
I will try to configure ovirt-engine-extension-aaa-ldap package as Alon
says.
+1 please do.
By other side, I have executed the command kinit and the response is:
kinit: Client not found in Kerberos database while getting initial
credentials
I am sure you did tht, but just to be on the safe side - did u perform kinit
principal@REALM?
My /etc/krb5.conf files is (adserver.siee.local is my AD server based in
Samba 4), I have modified this file to exchange EXAMPLE.COM by siee.local
and adserver.siee.local:
/etc/krb5.conf:
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
[libdefaults]
default_realm = SIEE.LOCAL
dns_lookup_realm = false
dns_lookup_kdc = false
ticket_lifetime = 24h
renew_lifetime = 7d
forwardable = true
[realms]
SIEE.LOCAL = {
kdc = adserver.siee.local
admin_server = adserver.siee.local
}
[domain_realm]
.siee.local = SIEE.LOCAL
siee.local = SIEE.LOCAL
My /etc/ovirt-engine/krb5.conf:
[libdefaults]
default_realm = SIEE.LOCAL
dns_lookup_realm = true
dns_lookup_kdc = true
ticket_lifetime = 24h
renew_lifetime = 7d
forwardable = no
default_tkt_enctypes = arcfour-hmac-md5
udp_preference_limit = 1
#realms
#domain_realm
This last file is the same that I had before my upgrade to oVirt 3.5.
Many thanks again,
Juanjo.
On Wed, Nov 26, 2014 at 5:37 AM, Yair Zaslavsky yzasl...@redhat.com wrote:
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Ondra Machacek omach...@redhat.com, Yair Zaslavsky
yzasl...@redhat.com, alo...@redhat.com,
users@ovirt.org
Sent: Tuesday, November 25, 2014 6:09:18 PM
Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello again,
Yes the password is correct, I can login in a Windows machine to my
domain
siee.local with the user Juanjo. Moreover I have chanbged this user
password to simpler one and the result is the same.
I have logged in administration portal with internal admin user and I try
to navigate through the domain to find user to assign some user in a VM
but
nothing is showed as you can see in the attached screen image and any
error is faced in administration portal, but the
/var/log/ovirt-engine/engine.log show this:
2014-11-25 17:02:05,355 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy]
(ajp--127.0.0.1-8702-5) Kerberos error: Pre-authentication information
was
invalid (24)
2014-11-25 17:02:05,356 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy]
(ajp--127.0.0.1-8702-5) Authentication Failed. Please verify the username
and password.
2014-11-25 17:02:05,357 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.DirectorySearcher]
(ajp--127.0.0.1-8702-5) Failed ldap search server
ldap://adserver.siee.local:389 using user juanjo@SIEE.LOCAL due to
Authentication Failed. Please verify the username and password.. We
should
not try the next server
2014-11-25 17:02:05,359 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.LdapBrokerCommandBase]
(ajp--127.0.0.1-8702-5) Failed to run command
LdapSearchUserByQueryCommand.
Domain is siee.local. User is juanjo@SIEE.LOCAL.
2014-11-25 17:02:05,402 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy]
(ajp--127.0.0.1-8702-5) Kerberos error: Pre-authentication information
was
invalid (24)
2014-11-25 17:02:05,404 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy]
(ajp--127.0.0.1-8702-5) Authentication Failed. Please verify the username
and password.
2014-11-25 17:02:05,406 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.DirectorySearcher]
(ajp--127.0.0.1-8702-5) Failed ldap search server
ldap://adserver.siee.local:389 using user juanjo@SIEE.LOCAL due to
Authentication Failed. Please verify the username and password.. We
should
not try the next server
2014-11-25 17:02:05,408 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.LdapBrokerCommandBase]
(ajp--127.0.0.1-8702-5) Failed to run command
LdapSearchGroupsByQueryCommand. Domain is siee.local. User is
juanjo@SIEE.LOCAL.
every time I click Go button. Moreover I haven't changed anything from
my
Samba4 AD and it is working handling my siee.local domain. This error is
showed since oVirt 3.5 upgrade.
Many thanks in advance,
Juanjo.
Re: [ovirt-users] USB redirect
On 11/23/2014 10:42 AM, Lev Veyde wrote: Hi Michal, As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO. Hi, Lev, you are correct; there is nothing to install on the guest for Spice Native USB. On the client side there is a need for remote-viewer to be configured with USB redir enabled, and having access to the device (via libusb). On a Windows client currently we use WinUSB driver to enable access to the USB device. The driver can be installed using the usbclerk service or manually (e.g. with Zadig). It must be installed for each device to be redirected. On Ovirt, as mentioned, Native Spice USB option has to be enabled. (This would also add the virtual usb devices needed on the qemu-kvm/spice-server side). Hope that helps, Uri. The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client. I forwarded the issue to the Spice team, they could properly point to the issue. Thanks in advance, Lev Veyde. - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, November 21, 2014 3:07:09 PM Subject: Re: [ovirt-users] USB redirect On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote: Hello Michal and everybody, I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. Is it possible that this usbredir driver is not in this ISO? adding Lev who builds the ISO…can you please check? Thanks, michal Many thanks in advanced, Juanjo. On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Michal, I will try it and I will try to upgrade my oVirt 3.4. Thanks again and best regards, Juanjo. On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote: Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Hi, it's a regular part of the 3.5 release... http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ enjoy!:) Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon, I have tried to find this package: yum list ovirt-engine-extension-aaa-ldap or yum list ovirt-engine-extension-* and always I receive: Error: No matching Packages to list Is it possible that I need some special repository? Many thanks again, Juanjo. On Tue, Nov 25, 2014 at 6:32 PM, Alon Bar-Lev alo...@redhat.com wrote: Hello Juan, Do you want to give a chance to the new provider? In this provider I can help? Package is ovirt-engine-extension-aaa-ldap. Documentation is available here[1]. The chances to make it work are higher, and this is the future of LDAP support. Alon [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] USB redirect
Thank you very much Uri and everybody, Best regards, Juanjo. On Wed, Nov 26, 2014 at 1:01 PM, Uri Lublin u...@redhat.com wrote: On 11/23/2014 10:42 AM, Lev Veyde wrote: Hi Michal, As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO. Hi, Lev, you are correct; there is nothing to install on the guest for Spice Native USB. On the client side there is a need for remote-viewer to be configured with USB redir enabled, and having access to the device (via libusb). On a Windows client currently we use WinUSB driver to enable access to the USB device. The driver can be installed using the usbclerk service or manually (e.g. with Zadig). It must be installed for each device to be redirected. On Ovirt, as mentioned, Native Spice USB option has to be enabled. (This would also add the virtual usb devices needed on the qemu-kvm/spice-server side). Hope that helps, Uri. The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client. I forwarded the issue to the Spice team, they could properly point to the issue. Thanks in advance, Lev Veyde. - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, November 21, 2014 3:07:09 PM Subject: Re: [ovirt-users] USB redirect On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote: Hello Michal and everybody, I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. Is it possible that this usbredir driver is not in this ISO? adding Lev who builds the ISO…can you please check? Thanks, michal Many thanks in advanced, Juanjo. On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Michal, I will try it and I will try to upgrade my oVirt 3.4. Thanks again and best regards, Juanjo. On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote: Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Hi, it's a regular part of the 3.5 release... http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ enjoy!:) Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon and everybody, Check in my ovirt-engine machine for ovirt-engine-aaa-ldap package and it is not available: yum list ovirt-engine* Loaded plugins: fastestmirror, refresh-packagekit, security, versionlock Loading mirror speeds from cached hostfile * base: ftp.udl.es * epel: mirror.uv.es * extras: ftp.udl.es * ovirt-3.5: ftp.nluug.nl * ovirt-3.5-epel: mirror.uv.es * ovirt-3.5-jpackage-6.0-generic: mirror.ibcp.fr * ovirt-epel: mirror.uv.es * ovirt-jpackage-6.0-generic: mirror.ibcp.fr * updates: ftp.udl.es Installed Packages ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-backend.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-cli.noarch 3.3.0.6-1.el6 @ovirt-3.3.3 ovirt-engine-dbscripts.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-extensions-api-impl.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-jboss-as.x86_64 7.1.1-1.el6 @ovirt-3.5 ovirt-engine-lib.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-restapi.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-sdk-python.noarch 3.5.0.8-1.el6 @ovirt-3.5 ovirt-engine-setup.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-base.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine-common.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-tools.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-userportal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-webadmin-portal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 Available Packages ovirt-engine-cli.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-dwh.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-dwh-setup.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-extensions-api-impl-javadoc.noarch 3.5.0.1-1.el6 ovirt-3.5 ovirt-engine-reports.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-reports-setup.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-sdk-java.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-sdk-java-javadoc.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-setup-plugin-allinone.noarch How can I get this package? Many thanks in advanced, Juanjo. On Tue, Nov 25, 2014 at 6:32 PM, Alon Bar-Lev alo...@redhat.com wrote: Hello Juan, Do you want to give a chance to the new provider? In this provider I can help? Package is ovirt-engine-extension-aaa-ldap. Documentation is available here[1]. The chances to make it work are higher, and this is the future of LDAP support. Alon [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 答复: Ovirt 3.5 Bug !!!!!!!!!!!!!!!!!!
Hi, But the 3.5 behavior is correct IMO. I think there are two possible solutions: 1, Create a brand new display network on the cluster (it'll be ONLY for displays) and make sure it's accessible by all clients. , or 2, Write a firewall rule or a VDSM hook that translates the spice/vnc traffic from vlans to the management network. (3, there is also a possibility to set 'display' attribute of your management network to false in the database. But I highly don't recommend this as the results aren't guaranteed.). Toni, could you check my suggestions, whether they are correct? Thanks! F. - Original Message - From: PaulCheung eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: Chao Xie xiec.f...@cn.fujitsu.com, users@ovirt.org, Lior Vernia lver...@redhat.com Sent: Wednesday, November 26, 2014 11:05:21 AM Subject: RE: [ovirt-users] 答复: Ovirt 3.5 Bug !! Except the display network, other network user can't telnet the 59xx spice port. I guess because the spice port only listening in this display network. But, all spice port can listening in all network interface in 0virt 3.4, why Ovirt 3.5 not provide this ? If I can't choose more than one network to display the spice port oVirt 3.5 , is there a way for me to down grade to oVirt 3.4? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Wed, 26 Nov 2014 04:37:39 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: xiec.f...@cn.fujitsu.com; users@ovirt.org; lver...@redhat.com Subject: Re: [ovirt-users] 答复: Ovirt 3.5 Bug !! Hi, I don't think multiple display network is possible within single cluster. How would engine know which is the correct one for given client? Also that would mean vdsm would have to start spice server on multiple interfaces and I believe it's not capable of this. But maybe I'm missing something. I'll try adding Lior from networking team. Lior, can you take a quick glance on this thread? Thanks! Franta. - Original Message - From: PaulCheung eq2...@msn.com To: Chao Xie xiec.f...@cn.fujitsu.com Cc: users@ovirt.org Sent: Wednesday, November 26, 2014 6:19:43 AM Subject: Re: [ovirt-users] 答复: Ovirt 3.5 Bug !! JUST PS. What I mean is if they make it into checkbox, it would sloved my problem. Sorry for my poor English! Sincerely yours, PaulCheung tel: 180-8882-7173 From: xiec.f...@cn.fujitsu.com To: eq2...@msn.com Subject: 答复: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 05:15:22 + Hi, Paul Did you change the code and let the “Migration Display” to checkbox ?Or just use PS to change the photo? 发件人 : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 代表 PaulCheung 发送时间 : 2014 年 11 月 26 日 11:27 收件人 : Frantisek Kobzik 抄送 : users@ovirt.org 主题 : Re: [ovirt-users] Ovirt 3.5 Bug !! Dear ALL, Can this turn into a multichoose box ? I need to display in all network interface!!! This can solve my problem now. Thank you very much! Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 10:55:44 +0800 Is there because the Display Network problem cause other network can not display ? How to enable all network's Display ? Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 09:53:33 +0800 It solved the host=kvm0x..com problem, But my guest still can't open the VM!!! User from D E, can't start the VM, except ovirt managerment network What should I do ? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Tue, 25 Nov 2014 11:26:06 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: users@ovirt.org Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! I'm not really sure if this the intended way to achieve customer separation. I don't know this field well, so I need to talk about it with my colleagues from networking team. Meanwhile you can try overriding your display address on host level like this: 1, In hosts subtab, edit host. 2, In the dialog select console. 3, Check 'Override display address', fill in corresponding host name (in your case kvm01.allwinnertech.com for host kvm01, kvm02.allwinnertech.com for kvm02 host etc) - do this for
[ovirt-users] ovirt italian translation and jenkins
Hello, Amedeo Salvati has begun working on it (we are now at 40% on master). Is it possible to include him in destination list for these e-mails? Address amedeo.salv...@gmail.com is ok BTW: is there any way to concentrate and work only master and then quickly dump to 3.5 eventually? Thanks in advance, Gianluca -- Forwarded message -- From: Jenkins ci oVirt Server jenk...@ovirt.org Date: Wed, Nov 26, 2014 at 2:37 PM Subject: [oVirt Jenkins] ovirt-engine_master_create-rpms_merged_italian_translation » fc20 - Build # 118 - Failure! To: de...@redhat.com, sbona...@redhat.com, gianluca.cec...@gmail.com, giorgio.bers...@gmail.com Project: http://jenkins.ovirt.org/job/ovirt-engine_master_create-rpms_merged_italian_translation/label=fc20/ Build: http://jenkins.ovirt.org/job/ovirt-engine_master_create-rpms_merged_italian_translation/label=fc20/118/ Build Number: 118 Build Status: Failure Triggered By: Started by upstream project ovirt-engine_master_create-rpms_merged_italian_translation build number 118 - Changes Since Last Success: - Changes for Build #118 [Daniel Erez] core: tpgt should not be sent when empty - Failed Tests: - No tests ran. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
- Original Message - From: Juan Jose jj197...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: Ondra Machacek omach...@redhat.com, Yair Zaslavsky yzasl...@redhat.com, users@ovirt.org Sent: Wednesday, November 26, 2014 3:04:14 PM Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue Hello Alon and everybody, Check in my ovirt-engine machine for ovirt-engine-aaa-ldap package and it is not available: yum list ovirt-engine* Loaded plugins: fastestmirror, refresh-packagekit, security, versionlock Loading mirror speeds from cached hostfile * base: ftp.udl.es * epel: mirror.uv.es * extras: ftp.udl.es * ovirt-3.5: ftp.nluug.nl * ovirt-3.5-epel: mirror.uv.es * ovirt-3.5-jpackage-6.0-generic: mirror.ibcp.fr * ovirt-epel: mirror.uv.es * ovirt-jpackage-6.0-generic: mirror.ibcp.fr * updates: ftp.udl.es Installed Packages ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-backend.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-cli.noarch 3.3.0.6-1.el6 @ovirt-3.3.3 ovirt-engine-dbscripts.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-extensions-api-impl.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-jboss-as.x86_64 7.1.1-1.el6 @ovirt-3.5 ovirt-engine-lib.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-restapi.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-sdk-python.noarch 3.5.0.8-1.el6 @ovirt-3.5 ovirt-engine-setup.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-base.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine-common.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-tools.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-userportal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-webadmin-portal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 Available Packages ovirt-engine-cli.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-dwh.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-dwh-setup.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-extensions-api-impl-javadoc.noarch 3.5.0.1-1.el6 ovirt-3.5 ovirt-engine-reports.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-reports-setup.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-sdk-java.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-sdk-java-javadoc.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-setup-plugin-allinone.noarch How can I get this package? Thanks for trying! Package is available at ovirt-3.5-snapshot[1]. [1] http://resources.ovirt.org/pub/ovirt-3.5-snapshot/ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] what should be the output of the default iptables rules?
- Original Message - From: Arman Khalatyan arm2...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:50:41 PM Subject: Re: [ovirt-users] what should be the output of the default iptables rules? Thanks! So As I undertand it correctly the @CUSTOM_RULES@ will be overridden by engine-config --set IPTablesConfigSiteCustom=? yes, and also th virt and gluster hanks. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:24 AM, Alon Bar-Lev alo...@redhat.com wrote: You can look within /usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/_config.sql for last instance of the value you seek (in most cases). IPTablesConfig: --- # oVirt default firewall configuration. Automatically generated by vdsm bootstrap script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT # vdsm -A INPUT -p tcp --dport @VDSM_PORT@ -j ACCEPT # SSH -A INPUT -p tcp --dport @SSH_PORT@ -j ACCEPT # snmp -A INPUT -p udp --dport 161 -j ACCEPT @CUSTOM_RULES@ # Reject any other input traffic -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited COMMIT --- - Original Message - From: Arman Khalatyan arm2...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:17:18 PM Subject: Re: [ovirt-users] what should be the output of the default iptables rules? Sorry forgot to mention: Centos 6.6 ovirt 3.5.x, glusterfs 3.6.x, Storage type is iscsi *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:13 AM, Alon Bar-Lev alo...@redhat.com wrote: What version do you use? - Original Message - From: Arman Khalatyan arm2...@gmail.com To: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:00:10 PM Subject: [ovirt-users] what should be the output of the default iptables rules? Hello, I was playing with custom iptables rules and something went wrong. Now my engine-config -g IPTablesConfig is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] what should be the output of the default iptables rules?
Thank you everything is green after re-install. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 3:22 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Arman Khalatyan arm2...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:50:41 PM Subject: Re: [ovirt-users] what should be the output of the default iptables rules? Thanks! So As I undertand it correctly the @CUSTOM_RULES@ will be overridden by engine-config --set IPTablesConfigSiteCustom=? yes, and also th virt and gluster hanks. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:24 AM, Alon Bar-Lev alo...@redhat.com wrote: You can look within /usr/share/ovirt-engine/dbscripts/upgrade/pre_upgrade/_config.sql for last instance of the value you seek (in most cases). IPTablesConfig: --- # oVirt default firewall configuration. Automatically generated by vdsm bootstrap script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT # vdsm -A INPUT -p tcp --dport @VDSM_PORT@ -j ACCEPT # SSH -A INPUT -p tcp --dport @SSH_PORT@ -j ACCEPT # snmp -A INPUT -p udp --dport 161 -j ACCEPT @CUSTOM_RULES@ # Reject any other input traffic -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited COMMIT --- - Original Message - From: Arman Khalatyan arm2...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:17:18 PM Subject: Re: [ovirt-users] what should be the output of the default iptables rules? Sorry forgot to mention: Centos 6.6 ovirt 3.5.x, glusterfs 3.6.x, Storage type is iscsi *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** On Wed, Nov 26, 2014 at 11:13 AM, Alon Bar-Lev alo...@redhat.com wrote: What version do you use? - Original Message - From: Arman Khalatyan arm2...@gmail.com To: users users@ovirt.org Sent: Wednesday, November 26, 2014 12:00:10 PM Subject: [ovirt-users] what should be the output of the default iptables rules? Hello, I was playing with custom iptables rules and something went wrong. Now my engine-config -g IPTablesConfig is empty. Can some one please give a hint what should be there??:) Thanks, Arman. *** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 答复: Ovirt 3.5 Bug !!!!!!!!!!!!!!!!!!
On 26/11/14 11:37, Frantisek Kobzik wrote: Hi, I don't think multiple display network is possible within single cluster. How would engine know which is the correct one for given client? Also that would mean vdsm would have to start spice server on multiple interfaces and I believe it's not capable of this. But maybe I'm missing something. I'll try adding Lior from networking team. Lior, can you take a quick glance on this thread? Hi! :) Indeed, this doesn't make much sense to me. I mean, I can understand what Paul would like to achieve, but from an implementation perspective it would be difficult as you described. Thanks! Franta. - Original Message - From: PaulCheung eq2...@msn.com To: Chao Xie xiec.f...@cn.fujitsu.com Cc: users@ovirt.org Sent: Wednesday, November 26, 2014 6:19:43 AM Subject: Re: [ovirt-users] 答复: Ovirt 3.5 Bug !! JUST PS. What I mean is if they make it into checkbox, it would sloved my problem. Sorry for my poor English! Sincerely yours, PaulCheung tel: 180-8882-7173 From: xiec.f...@cn.fujitsu.com To: eq2...@msn.com Subject: 答复: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 05:15:22 + Hi, Paul Did you change the code and let the “Migration Display” to checkbox ?Or just use PS to change the photo? 发件人 : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 代表 PaulCheung 发送时间 : 2014 年 11 月 26 日 11:27 收件人 : Frantisek Kobzik 抄送 : users@ovirt.org 主题 : Re: [ovirt-users] Ovirt 3.5 Bug !! Dear ALL, Can this turn into a multichoose box ? I need to display in all network interface!!! This can solve my problem now. Thank you very much! Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 10:55:44 +0800 Is there because the Display Network problem cause other network can not display ? How to enable all network's Display ? Sincerely yours, PaulCheung tel: 180-8882-7173 From: eq2...@msn.com To: fkob...@redhat.com CC: users@ovirt.org Subject: RE: [ovirt-users] Ovirt 3.5 Bug !! Date: Wed, 26 Nov 2014 09:53:33 +0800 It solved the host=kvm0x..com problem, But my guest still can't open the VM!!! User from D E, can't start the VM, except ovirt managerment network What should I do ? Sincerely yours, PaulCheung tel: 180-8882-7173 Date: Tue, 25 Nov 2014 11:26:06 -0500 From: fkob...@redhat.com To: eq2...@msn.com CC: users@ovirt.org Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! I'm not really sure if this the intended way to achieve customer separation. I don't know this field well, so I need to talk about it with my colleagues from networking team. Meanwhile you can try overriding your display address on host level like this: 1, In hosts subtab, edit host. 2, In the dialog select console. 3, Check 'Override display address', fill in corresponding host name (in your case kvm01.allwinnertech.com for host kvm01, kvm02.allwinnertech.com for kvm02 host etc) - do this for every host in the cluster. This should force returning hostnames in the .vv file. Cheers, Franta. - Original Message - From: LazyPaul eq2...@msn.com To: Frantisek Kobzik fkob...@redhat.com Cc: users@ovirt.org Sent: Tuesday, November 25, 2014 3:51:27 PM Subject: Re: [ovirt-users] Ovirt 3.5 Bug !! My network is look like this: 3 vlan, they can ’ t visit each other, so I have 3 dns server, The console.vv file in the ovirt 3.4 the host = kvm01.allwinnertech.com after update to 3.5 the host = 172.16.1.115, this cause the VLAN 101 vlan 102 user can ’ t open 172.16.1.115, It should be : host =kvm01.allwinnertech.com --- Server management network: VLAN 100 kvm01.allwinnertech.com http://kvm01.allwinnertech.com/ 172.16.1.115 kvm02.allwinnertech.com http://kvm02.allwinnertech.com/ 172.16.1.116 kvm03 1.117 kvm04 1.120 DNS server: 172.16.1.2 --- Company A user: VLAN 101 kvm01.allwinertech.com http://kvm01.allwinertech.com/ 192.168.200.1 kvm02.allwinnertech.com
Re: [ovirt-users] [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
- Original Message - From: Sandro Bonazzola sbona...@redhat.com To: nsof...@redhat.com, Darshan Narayana Murthy dnara...@redhat.com, Users@ovirt.org, de...@ovirt.org, infra in...@ovirt.org Sent: Wednesday, November 26, 2014 10:15:11 AM Subject: [ovirt-devel] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status Hi, We're going to start composing oVirt 3.5.1 RC on *2014-12-02 08:00 UTC* from 3.5 branch. In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. The bug tracker [1] shows 3 open blocker: Bug IDWhiteboard Status Summary 1162640 gluster POSTsupervdsm segfault in libgfapi while querying volume status detail 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile 1159839 storage POSTNew FC LUNs are not detected on hypervisor without a reboot Patch was merged on master - just needs backporting and merging there too. Seems simple enough. Nir - ETA on this pleaes? The following bugs have been keyworded as Regression and not marked as blockers: Bug IDWhiteboard Status Target Summary 1160846 sla NEW --- Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile 1118349 storage NEW 3.5.1 [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError Not interesting - this is indeed not a blocker. In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2014-12-01 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-12-01 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. - Please provide an ETA for the pending blockers as soon as possible. Infra: - Please check Jenkins status for 3.5 jobs and sync with relevant maintainers if there are issues. There are still 98 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 71 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please review bugs marked as Regression and add to blocker if they're real regressions. - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Weekly Sync: November 26, 2014
Minutes: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-26-15.07.html Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-26-15.07.txt Log: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-26-15.07.log.html = #ovirt: oVirt Weekly Sync = Meeting started by bkp at 15:07:14 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2014/ovirt.2014-11-26-15.07.log.html . Meeting summary --- * Agenda and roll Call (bkp, 15:07:31) * infra update (bkp, 15:07:31) * 3.5.z updates (bkp, 15:07:31) * 3.6.0 status (bkp, 15:07:31) * conferences and workshops (bkp, 15:07:31) * other topics (bkp, 15:07:33) * infra update (bkp, 15:09:33) * infra We had an outage last week, while upgrading vdsm to 3.5 on the hosts, that left us with some hosts with vdsm 3.4 and some with 3.5, will have to plan the upgrade more carefully. (bkp, 15:24:45) * infra An issue with the mock cleanup that rendered the slaves unusable, that is solved, but there's a new issue that I'm investigating that forced us to take them out of the pool (bkp, 15:24:49) * infra We also made some progress on getting vdsm unit tests inside mock running. Two tests are failing, including the partition check test. sbonazzo suggested nested VM approach. Will need another host updated to F20 to enable such an approach. (bkp, 15:24:53) * infra Engine and jenkins upgraded (to 3.5 and 1.583, respectively) (bkp, 15:24:57) * infra Nesting problems in PHX update: dcaro has to update on host so we can test, but dima said that it's working well (bkp, 15:24:59) * infra Issues are being collected for the Infra Day Hackathon (date TBD), here: https://docs.google.com/spreadsheets/d/1E8e88Nb_OcT7BQprVF7ER6R8--T8mzgc_uHo3i3zeeA/edit#gid=0 (bkp, 15:25:02) * 3.5.z updates (bkp, 15:25:05) * 3.5.z updates Full status here: http://lists.ovirt.org/pipermail/users/2014-November/029543.html (bkp, 15:31:29) * 3.5.z updates Three blockers (1162640, 1160846, and 1159839) in place for 3.5.1 RC, no ETA set on fixes. (bkp, 15:31:32) * 3.5.z updates RC will need to be postponed one week to accomodate blockers, but that date is even risky. (bkp, 15:31:38) * 3.5.z updates Almost all jenkins jobs for 3.5 are now green (except one for node, fabiand team is already on it) (fabiand needs nesting to get them green, see infra note above) (bkp, 15:31:41) * 3.6 status (bkp, 15:31:45) * 3.5.z updates addendum: Two regressions (1160846 and 1118349) are tagged for 3.5.1 and need to be evaluated. (bkp, 15:33:01) * 3.6 status Full status here: http://lists.ovirt.org/pipermail/users/2014-November/029545.html (bkp, 15:51:13) * 3.6 status No blockers (as expected). Bug count on the rise. (bkp, 15:51:16) * 3.6 status An earlier repoclosure error on missing mom-0.4.3 was repaired and released today by alitke (just needed verification and karma on Fedora systems) (bkp, 15:51:19) * 3.6 status Today is last day for release criteria/process discussion. skieske made a rephrase suggestion, about feature acceptance review, which was accepted. (bkp, 15:51:22) * 3.6 status Updated release criteria/process at http://lists.ovirt.org/pipermail/users/2014-November/028875.html will be posted on wiki and then announced soon. (bkp, 15:51:25) * ACTION: bkp to set up new release process page on wiki (bkp, 15:51:28) * 3.6 status Still gathering 3.6 features at http://goo.gl/9X3G49, no feature deadline set yet. (bkp, 15:51:30) * 3.6 status Length of release cycle still not confirmed, but gathering all features anyway to have them in one place. (bkp, 15:51:33) * conferences and workshops (bkp, 15:51:39) * Conferences Notification on FOSDEM stands is on Dec. 15. Still time to get your devroom submittals in for the virt and IaaS devrooms. (bkp, 15:53:13) * Conferences I am in discussions with FOSSAsia (http://fossasia.org/) to see about an oVirt workshop at that event in mid-March. This is a Singapore venue, so if anyone from east Asia is interested in speaking/attending, let bkp know. (bkp, 15:53:16) * Conferences If anyone wants to submit a quick report on DevOpsDays TLV for the Community blog, that would be welcome! (bkp, 15:53:20) * other topics (bkp, 15:54:31) * Other A reminder that the U.S. will be offline tomorrow and Friday for Thanksgiving holiday. (bkp, 15:55:02) * Other bkp will be recording demo videos of oVirt beginning after the holidays. If anyone wants to help/suggest topics, ping me. (bkp, 15:55:05) Meeting ended at 15:58:02 UTC. Action Items * bkp to set up new release process page on wiki Action Items, by person --- * bkp * bkp to set up new release process page on wiki * **UNASSIGNED** * (none) People Present
Re: [ovirt-users] ovirt 3.5 rc2 unable to mount cd on running VM
- Original Message - From: Gianluca Cecchi gianluca.cec...@gmail.com To: Omer Frenkel ofren...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 2:13:29 AM Subject: Re: [ovirt-users] ovirt 3.5 rc2 unable to mount cd on running VM On Sun, Sep 28, 2014 at 9:15 AM, Omer Frenkel ofren...@redhat.com wrote: There is an open bug on that Bug 1145728 - change cd fail on 'Drive is not a vdsm image' https://bugzilla.redhat.com/show_bug.cgi?id=1145728 Hello, on final 3.5 (ovirt-engine-3.5.0.1-1.el6.noarch) I still have this problem attaching CD: Error while executing action Change CD: Drive image file could not be found How can I test the fix that makes the bugzilla entry in VERIFIED status now? Is the status to be considered for 3.5.1 or can we have the fix in 3.5 too? Gianluca looking at git log the fix should be in the 3.5.0 GA so maybe its something else.. can you share the engine.log and vdsm.log for the time of the failure? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt 3.5 rc2 unable to mount cd on running VM
On Wed, Nov 26, 2014 at 6:03 PM, Omer Frenkel ofren...@redhat.com wrote: - Original Message - From: Gianluca Cecchi gianluca.cec...@gmail.com To: Omer Frenkel ofren...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, November 26, 2014 2:13:29 AM Subject: Re: [ovirt-users] ovirt 3.5 rc2 unable to mount cd on running VM On Sun, Sep 28, 2014 at 9:15 AM, Omer Frenkel ofren...@redhat.com wrote: There is an open bug on that Bug 1145728 - change cd fail on 'Drive is not a vdsm image' https://bugzilla.redhat.com/show_bug.cgi?id=1145728 Hello, on final 3.5 (ovirt-engine-3.5.0.1-1.el6.noarch) I still have this problem attaching CD: Error while executing action Change CD: Drive image file could not be found How can I test the fix that makes the bugzilla entry in VERIFIED status now? Is the status to be considered for 3.5.1 or can we have the fix in 3.5 too? Gianluca looking at git log the fix should be in the 3.5.0 GA so maybe its something else.. can you share the engine.log and vdsm.log for the time of the failure? Created a new CentOS 7 VM and indeed it doesn't show the problem at first sight. You are right that there was a problem with the ISO Domain going up and down (for the moment I stopped iptales on engine and this fixed the problem... going to check further) The pre-existing one instead (c65new) is ok too now. I presume there is nothing to run against db or similar to fix the problem for pre-existing VMs, correct? Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt device-mapper: table: 253:3: multipath: error getting device
Hi users, I'm using CentOS 6.6 as a host, when I start Installing the host to my ovirt-engine webamin, I starting to have this error message in my host1. Nov 27 10:15:32 host1 kernel: device-mapper: table: 253:3: multipath: error getting device Nov 27 10:15:32 host1 kernel: device-mapper: ioctl: error adding target to table Nov 27 10:22:11 host1 multipathd: force queue_without_daemon (operator) Nov 27 10:22:12 host1 multipathd: 360030480190c68001be31b9a1587e30a: ignoring map Nov 27 10:22:12 host1 kernel: device-mapper: table: 253:3: multipath: error getting device Nov 27 10:22:12 host1 kernel: device-mapper: ioctl: error adding target to table Nov 27 10:22:12 host1 kernel: device-mapper: table: 253:3: multipath: error getting device Nov 27 10:22:12 host1 kernel: device-mapper: ioctl: error adding target to table Nov 27 10:22:12 host1 multipathd: 360030480190c68001be3224d189b03e5: ignoring map Nov 27 10:22:12 host1 multipathd: path checkers start up When I try to reboot it it will only stuck on a screen saying. device-mapper: error getting device continuously, how can I fix it? Hope someone can Help me. TIA Sandvik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Weekly Sync: November 26, 2014
Von: users-boun...@ovirt.org [users-boun...@ovirt.org]quot; im Auftrag von quot;Brian Proffitt [bprof...@redhat.com] Gesendet: Mittwoch, 26. November 2014 17:01 An: users Cc: board Betreff: [ovirt-users] oVirt Weekly Sync: November 26, 2014 ... * 3.6 status Still gathering 3.6 features at http://goo.gl/9X3G49, no feature deadline set yet. (bkp, 15:51:30) Thanks for the update Brian. Regarding FC21 support (BZ1163062): Do we speak of engine or nodes? Hopefully nodes can be installed already with 3.5.x (thumbs up for x=2). Markus Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Ãber das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt italian translation and jenkins
Il 26/Nov/2014 20:59 Einav Cohen eco...@redhat.com ha scritto: - Original Message - From: Gianluca Cecchi gianluca.cec...@gmail.com Sent: Wednesday, November 26, 2014 9:03:35 AM Hello, Amedeo Salvati has begun working on it (we are now at 40% on master). Is it possible to include him in destination list for these e-mails? Address amedeo.salv...@gmail.com is ok BTW: is there any way to concentrate and work only master and then quickly dump to 3.5 eventually? actually, yes - a similar translation effort is starting right about now for German in 'master', and we will most likely backport these translations to 3.5 eventually using a script or similar. So we may be able to run that same script for Italian as well. so feel free to concentrate your efforts from now on only on 'master', and once the translation completion on 'master' will be sufficient - we can backport the translations to 3.5 for you. Great! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Add a disk to a VM
HI, I was stuck with a problem when I wanted to add ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Fwd: Add a disk to a VM
HI, I was stuck with a problem when I wanted to add a disk to a VM in oVirt 3.5. I forgot to fill the profile field but I haven't got any warnign form the UI. Is it possible to add a red highlight when you forgot the to fill the profile filed ? Regards. James ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] DataCenters/QoS/CPU
Ohh i see.. thank you. -- *Luciano Giacchetta | Tecnología Informática* *+Linea: +54 (11) 6091 7601 +iNum: +883 510 009 903 145+eMail: luciano.giacche...@osit.com.ar luciano.giacche...@osit.com.ar +Site: http://www.osit.com.ar http://www.osit.com.ar* 2014-11-26 5:28 GMT-03:00 Artyom Lukianov aluki...@redhat.com: You need to specify limit for host cpu loading in %, so if you want that your vm will not utilize more than 30% of host cpu you need to put this value to 30. Thanks - Original Message - From: Luciano Giacchetta luciano.giacche...@osit.com.ar To: users@ovirt.org Sent: Tuesday, November 25, 2014 5:47:17 PM Subject: [ovirt-users] DataCenters/QoS/CPU Hello, I want to implement a new CPU QoS but i don't know what data needs in Limit: field. I saw this page, http://www.ovirt.org/Features/CPU_SLA but as i can see it only reference to http://libvirt.org/formatdomain.html#elementsCPUTuning Does Limit field need to be filled with some options from cputune? Is there some related information? Ovirt: 3.5.1 Centos: 6.6 Regards, -- Luciano Giacchetta | Tecnología Informática +Linea: +54 (11) 6091 7601 +iNum: +883 510 009 903 145 +eMail: luciano.giacche...@osit.com.ar +Site: http://www.osit.com.ar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Issues with vm start up
Hi All,
I am using the ovirt version 3.5 and having some issues with the vm startup
with cloud-init using api in run-once mode.
Below is the steps i follow :-
1. Create the VM by API from precreated Template..
2. Start the VM in run-once mode and push the cloud-init data from API..
3. VM stuck and from console it display the following :-
Booting from DVD/CD.. ...
Boot failed : could not read from CDROM (code 004)
I am using the following xml for this operation :-
action
vm
os
boot dev='cdrom'/
/os
initialization
cloud_init
host
addresstest/address
/host
network_configuration
nics
nic
interfacevirtIO/interface
nameeth0/name
boot_protocolstatic/boot_protocol
mac address=''/
network
ip address='' netmask='' gateway=''/
/network
on_boottrue/on_bootvnic_profile id='' /
/nic
nic
interfacevirtIO/interface
nameeth1/name
boot_protocolstatic/boot_protocol
mac address=''/
network
ip address='' netmask='255.255.255.0' gateway=''/
/network
on_boottrue/on_bootvnic_profile id='' /
/nic
/nics
/network_configuration
files
file
name/ignored/namecontent![CDATA[#cloud-config
disable-ec2-metadata: true
disable_root: false
ssh_pwauth: true
ssh_deletekeys: true
chpasswd: { expire: False }
users:
- name: root
primary-group: root
passwd: 8W7RQ5Bh
lock-passwd: false
runcmd:
- sed -i '/nameserver/d' /etc/resolv.conf
- echo 'nameserver 8.8.8.8' /etc/resolv.conf
- echo 'nameserver 8.8.4.4' /etc/resolv.conf
- echo 'root:8W7RQ5Bh' | chpasswd
- yum -y update
- yum -y install rdate
- rdate -s stdtime.gov.hk]]/content
typeplaintext/type
/file
/files
/cloud_initcustom_script![CDATA[#cloud-config
disable-ec2-metadata: true
disable_root: false
ssh_pwauth: true
ssh_deletekeys: true
chpasswd: { expire: False }
users:
- name: root
primary-group: root
passwd: 8W7RQ5Bh
lock-passwd: false
runcmd:
- sed -i '/nameserver/d' /etc/resolv.conf
- echo 'nameserver 8.8.8.8' /etc/resolv.conf
- echo 'nameserver 8.8.4.4' /etc/resolv.conf
- echo 'root:8W7RQ5Bh' | chpasswd
- yum -y update
- yum -y install rdate
- rdate -s stdtime.gov.hk]]/custom_script
/initialization
/vm
/action
I am also attaching the screen shot to this.
--
Regards
Shanil
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Issues with vm start up
- Original Message -
From: Shanil S xielessha...@gmail.com
To: users@ovirt.org, Juan Hernandez jhern...@redhat.com, Omer Frenkel
ofren...@redhat.com
Sent: Thursday, November 27, 2014 6:33:04 AM
Subject: Issues with vm start up
Hi All,
I am using the ovirt version 3.5 and having some issues with the vm startup
with cloud-init using api in run-once mode.
Below is the steps i follow :-
1. Create the VM by API from precreated Template..
2. Start the VM in run-once mode and push the cloud-init data from API..
3. VM stuck and from console it display the following :-
Booting from DVD/CD.. ...
Boot failed : could not read from CDROM (code 004)
I am using the following xml for this operation :-
action
vm
os
boot dev='cdrom'/
/os
initialization
cloud_init
host
addresstest/address
/host
network_configuration
nics
nic
interfacevirtIO/interface
nameeth0/name
boot_protocolstatic/boot_protocol
mac address=''/
network
ip address='' netmask='' gateway=''/
/network
on_boottrue/on_bootvnic_profile id='' /
/nic
nic
interfacevirtIO/interface
nameeth1/name
boot_protocolstatic/boot_protocol
mac address=''/
network
ip address='' netmask='255.255.255.0' gateway=''/
/network
on_boottrue/on_bootvnic_profile id='' /
/nic
/nics
/network_configuration
files
file
name/ignored/namecontent![CDATA[#cloud-config
disable-ec2-metadata: true
disable_root: false
ssh_pwauth: true
ssh_deletekeys: true
chpasswd: { expire: False }
users:
- name: root
primary-group: root
passwd: 8W7RQ5Bh
lock-passwd: false
runcmd:
- sed -i '/nameserver/d' /etc/resolv.conf
- echo 'nameserver 8.8.8.8' /etc/resolv.conf
- echo 'nameserver 8.8.4.4' /etc/resolv.conf
- echo 'root:8W7RQ5Bh' | chpasswd
- yum -y update
- yum -y install rdate
- rdate -s stdtime.gov.hk]]/content
typeplaintext/type
/file
/files
/cloud_initcustom_script![CDATA[#cloud-config
disable-ec2-metadata: true
disable_root: false
ssh_pwauth: true
ssh_deletekeys: true
chpasswd: { expire: False }
users:
- name: root
primary-group: root
passwd: 8W7RQ5Bh
lock-passwd: false
runcmd:
- sed -i '/nameserver/d' /etc/resolv.conf
- echo 'nameserver 8.8.8.8' /etc/resolv.conf
- echo 'nameserver 8.8.4.4' /etc/resolv.conf
- echo 'root:8W7RQ5Bh' | chpasswd
- yum -y update
- yum -y install rdate
- rdate -s stdtime.gov.hk]]/custom_script
/initialization
/vm
/action
I am also attaching the screen shot to this.
--
Regards
Shanil
can you please attach engine.log and vdsm.log (of the host that runs the vm)
for the time you tried to run the vm?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
