Re: [ovirt-users] Storage domain not in pool issue
Please attach /var/log/ovirt-engine/engine.log from engine and /var/log/vdsm/vdsm.log from the host(s). - Original Message - From: VONDRA Alain avon...@unicef.fr To: Elad Ben Aharon ebena...@redhat.com, Idan Shaby ish...@redhat.com Cc: users@ovirt.org Sent: Tuesday, 31 March, 2015 1:49:42 AM Subject: RE:[ovirt-users] Storage domain not in pool issue Hi, Is there anybody who can help me ? I have more than 6 month of work in these two storage domains... Thanks, Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr De : users-boun...@ovirt.org [users-boun...@ovirt.org] de la part de VONDRA Alain [avon...@unicef.fr] Envoyé : lundi 30 mars 2015 17:33 À : Elad Ben Aharon; Idan Shaby Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Hi, Is there anyother way to synchronize the engine and vdsm ? Thanks Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -Message d'origine- De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la part de VONDRA Alain Envoyé : lundi 30 mars 2015 16:17 À : Elad Ben Aharon; Idan Shaby Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Elad, I’ve tried many times to restart the engine without success. Thanks De : Elad Ben Aharon [mailto:ebena...@redhat.com] Envoyé : lundi 30 mars 2015 16:00 À : VONDRA Alain; Idan Shaby Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Thanks for the input. From the input, it's clear that engine is not synchronized with vdsm regarding the storage pool which these 2 domains are attached to. I guess that ovirt-engine service restart would solve it, but I would like someone from DEV to take a look before doing so. Idan, can you please take a look? Thanks Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr From: VONDRA Alain avon...@unicef.fr To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Monday, 30 March, 2015 4:18:08 PM Subject: RE: [ovirt-users] Storage domain not in pool issue Thank you for your help ! I attempt to activate using oVirt GUI, in fact this SD was previously attached to the Data Center, and I had a crash on it, after a recover à my manager oVirt, I see all the VMs and SD up, but the VMs contained in the 2 bad Storage Domain didn’t go up, so I’ve tried to put the SD in maintenance, but now I can’t even activate this domain. I didn’t yet try to put the second bad SD in maintenance after that. id | storage_pool_id --+- --+- 072fbaa1-08f3-4a40-9f34-a5ca22dd1d74 | 37a291a4-6108-4bb9-af33-da88555ab3a9 | f422de63-8869-41ef-a782-8b0c9ee03c41 d7b9d7cc-f7d6-43c7-ae13-e720951657c9 | f422de63-8869-41ef-a782-8b0c9ee03c41 7e40772a-fe94-4fb2-94c4-6198bed04a6a | f422de63-8869-41ef-a782-8b0c9ee03c41 7e137867-953f-4fd5-a77a-f3bc18cd140e | f422de63-8869-41ef-a782-8b0c9ee03c41 1f6dec51-12a6-41ed-9d14-8f0ad4e062d2 | f422de63-8869-41ef-a782-8b0c9ee03c41 69ddb676-f423-43fc-af38-909bbedeef61 | f422de63-8869-41ef-a782-8b0c9ee03c41 (7 lignes) Thanks De : Elad Ben Aharon [mailto:ebena...@redhat.com] Envoyé : lundi 30 mars 2015 15:09 À : VONDRA Alain Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Thanks. As you can see, the domain is not attached to pool f422de63-8869-41ef-a782-8b0c9ee03c41, which is the pool you've tried to activate the domain in. Via which API did you attempt to activate the domain in this pool? Also, please execute the following command on engine and paste its output here. su - postgres -c psql -U postgres engine -c 'select id,storage_pool_id from storage_domains;' | less -S Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr From: VONDRA Alain avon...@unicef.fr To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Monday, 30 March, 2015 3:43:35 PM Subject: RE: [ovirt-users] Storage domain not in pool issue My oVirt version is 3.5.0.1 [root@unc-srv-hyp2 ~]$ vdsClient -s 0 getStorageDomainInfo d7b9d7cc-f7d6-43c7-ae13-e720951657c9 uuid = d7b9d7cc-f7d6-43c7-ae13-e720951657c9 vguuid = zyiwLa-STgp-v3r8-KJqj-1AIP-rC2k-4NuXqf state = OK version = 3 role = Regular type = ISCSI
Re: [ovirt-users] Hosted-Engine misc configuration
- Original Message - From: Jaicel jai...@asti.dost.gov.ph To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 9:52:28 AM Subject: Re: [ovirt-users] Hosted-Engine misc configuration i attached the setup log. Seems from the log that the storage space was not empty - perhaps left over from a previous attempt or something like that. You might have had locking issues etc. If you want to further debug this, please try again, and then check/post: vdsm: logs from /var/log/vdsm sanlock: logs from /var/log/sanlock.log output of 'sanlock -D' Otherwise, it might be simpler to just start from scratch: reinstall OS on host clean up storage space yum install and deploy again hosted-engine. If it then fails again, please check/post above logs (including hosted-engine). Thanks and best regards, -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Snapshot issue
- Original Message - From: Koen Vanoppen vanoppen.k...@gmail.com To: Omer Frenkel ofren...@redhat.com, users@ovirt.org Sent: Tuesday, March 31, 2015 7:35:57 AM Subject: Re: [ovirt-users] Snapshot issue I just wanted to remove the snapshots in ovirt... That's all... And now they are locked. Without the possibility to remove, reboot the vm or cancel the snapshots... So I'm stuck... How can I change the status of the snapshot in the db, so that at least I can remove the VM? And what could be the impact , worst case? i thought you want to save the vm, then the worst case might be data corruption, in case something is really wrong with the snapshots and you try to run the vm. more optimistic, in case snapshot is missing in storage but not deleted in db, vm would fail to start, then you might be able to just delete the snapshot (again probably only manually in db) and recover completely. if you just want to delete the vm, worst case would be that you have to clear manually stuff from the db/storage if you decide to change the db, better to have a backup :) also, i would recommend making it when the engine is down. ok, so, first to get the info in the db: select snapshot_id,description,status from snapshots where status = 'LOCKED' and vm_id in (select vm_guid from vm_static where vm_name='vm name here'); just update it to be 'OK' : update snapshots set status = 'OK' where snapshot_id = 'snapshot id from previous query'; also, check there are locked images related to this snapshot: select image_guid,imagestatus from images where vm_snapshot_id = 'snapshot id from previous query' and imagestatus != 1; if so, need to unlock it as well: updates images set imagestatus = 1 where image_guid = 'id of images from previous query'; let me know how it went Kind regards, 2015-03-30 13:46 GMT+02:00 Omer Frenkel ofren...@redhat.com: - Original Message - From: Koen Vanoppen vanoppen.k...@gmail.com To: Omer Frenkel ofren...@redhat.com, users@ovirt.org Sent: Monday, March 30, 2015 7:44:10 AM Subject: Re: [ovirt-users] Snapshot issue I can't even remove them... Something needs to be done... Any ideas? not sure i understand what you tried? the 'broken' snapshots are locked, so you can't remove them. as i said, there is no easy and safe way to fix this... you can try to change the status of the snapshot in the db - but i am not sure what will happen! 2015-03-25 8:45 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com: Hi Omer, Thanks for your reply. I was cleaning our snapshots on oVirt. So I started deleting snapshots one by one. In total in deleted 10 snapshots. 5 VM's came back up, without the error message, the rest of them are still down with this error message. 2015-03-25 7:36 GMT+01:00 Omer Frenkel ofren...@redhat.com: - Original Message - From: Koen Vanoppen vanoppen.k...@gmail.com To: users@ovirt.org Sent: Wednesday, March 25, 2015 8:09:17 AM Subject: Re: [ovirt-users] Snapshot issue I'm still not able to start my VM's: Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again... I already restarted the vdsm deamons on the hypervisors and restarted the engine too... Does anybody has any clue how I can solve this state? Kind regards, Koen 2015-03-24 7:45 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com : This is in the logs: 2015-03-24 07:41:50,436 WARN [org.ovirt.engine.core.bll.RunVmCommand] (ajp--127.0.0.1-8702-12) [686c18ce] CanDoAction of action RunVm failed for user Reasons: VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_IS_DURING_SNAPSHOT Can't I clear all this? Because I Still have several machines down due the reason he is still in the cannot run VM... state... this happens because you have a snapshot in status locked, probably you did some operation on snapshot and something went wrong (it might have failed without clearing the state..) there is no easy and safe way to fix this (you can change the status of the snapshot in the db but i am not sure what will happen) what action did you do with snapshots on this vm? what was the result? 2015-03-23 8:40 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com : Dear all, I have the following problem: Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again. It is like this since Friday... How can I resolve this? I really need this vm to be up again... Kind regards, Koen ___ Users mailing list
Re: [ovirt-users] oVirt management network
I have enabled the VLAN tagging but no dice. Still I cannot attach logical network to the VLANS in oVirt, and I see them represented in the list, like this: namebond vlan Network nameaddress eth0bond0.50ovirtmgmt bond0 eth1bond0.60 ovirtmgmt - Also since ip address is added to a ovirtmgmt bridge, I can not save any additional configuration until I resolve this because it ovirt says that there are two interfaces with the same IP address. System-Email Mit freundlichen Grüßen / Best Regards Bojan Popovic System Administrator | IT Novi Sad Tel: +49 (0) 711/ 320 90 285 www.jago24.de http://www.jago24.de www.jago-ag.de http://www.jago-ag.de E-Mail: bojan.popo...@jago-ag.de mailto:bojan.popo...@jago-ag.de http://www.jago24.de JAGO AG Amtsgericht Stuttgart Ingersheimer Str.12 Reg.Nr.: HRB 741306 D-70499 Stuttgart USt-ID: DE283513307 Vorstand: WEEE-Reg.-Nr. DE 70299572 Goran Jakovac Aufsichtsratsvorsitzender: Dipl.-oec. Univ. Rolf Breyer Jago_AG_logo On 30.03.2015. 13:14, René Koch wrote: Hi Bojan, Did you configure a VLAN tag für your ovirtmgmt interface? You have to do this in „Data Centers“ – select dc – „Logical Networks“. Afterwards you should be able to configure network from oVirt webadmin interface again. Don’t have a test setup with VLAN tags for ovirtmgmt atm, but did this multiple times before… Regards, René *Von:*users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *Im Auftrag von *Bojan Popovic *Gesendet:* Montag, 30. März 2015 12:15 *An:* users@ovirt.org *Betreff:* [ovirt-users] oVirt management network Hello, I am having a strange issue in creating ovirtmgmt bridge over vlan interface. I have set-up a bond from physical interfaces. On top of a bond there are three VLANs one of which is in ovirtmgmt bridge. I have set it up manually according to http://www.ovirt.org/Bonding_VLAN_Bridge Somehow the bond itself is also added to bridge in oVirt web interface, after reboot there also were two added lines to configuration of that bond: # Generated by VDSM version 4.16.10-8.gitc937927.el7 BRIDGE=ovirtmgmt No matter how I try to remove the bond from the bridge it doesn't succeed. If I edit the config files manually it isn't replicated to web interface. If I try to detach it from web interface, I can only attach bridge back to the bond interface. Of course configuration cannot be saved until the bridge is attached to an interface. I have tried putting the host in maintenance mode, shutting down the hosted engine and doing all the changes live. Anyone has a suggestion how to resolve this? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modules sanlock are not configured
I did that also. I forgot to mention it because you only have to run --force if you didn’t stop the sanlock process of running. The result of with and without is the same. Still the vdsmd process cannot start. From: Roy Golan rgo...@redhat.commailto:rgo...@redhat.com Date: Monday 30 March 2015 23:25 To: Jurriën Bloemen jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloe...@dmc.amcnetworks.com Cc: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Modules sanlock are not configured On Mar 30, 2015 10:45 PM, Jurriën jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloe...@dmc.amcnetworks.com wrote: Hi all, I have CentOS 7 running and I added the oVirt 3.5 repo to it. I open the oVirt Manager and added a new system to it. The manager says installing and after that is fails to connect. Looking on the system I see: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running mkdirs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_coredump Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_vdsm_logs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running wait_for_network Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running run_init_hooks Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running upgraded_version_check Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running check_is_configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Error: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: One of the modules is not configured to work with VDSM. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: To configure the module use the following: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure [--module module-name]'. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: If all modules are not configured try to use: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure --force' Mar 30 21:09:37 vdsmd_init_common.sh[7106]: (The force flag will stop the module's service and start it Mar 30 21:09:37 vdsmd_init_common.sh[7106]: afterwards automatically to load the new configuration.) Mar 30 21:09:37 vdsmd_init_common.sh[7106]: libvirt is already configured for vdsm Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Modules sanlock are not configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: stopped during execute check_is_configured task (task returned with error code 1). So I run vdsm-tool configure after I stop sanlock. # vdsm-tool configure Try adding --force (this is what the log suggests) Checking configuration status... libvirt is already configured for vdsm SUCCESS: ssl configured to true. No conflicts Running configure... Reconfiguration of sanlock is done. Done configuring modules to VDSM. But when I want to start vdsmd it still gives the error that sanlock is not configured. Does somebody has a solution for this? I am a bit lost on this… Google only tells me that there was a bug in 3.4. Thanks in advance, Jurriën This message (including any attachments) may contain information that is privileged or confidential. If you are not the intended recipient, please notify the sender and delete this email immediately from your systems and destroy all copies of it. You may not, directly or indirectly, use, disclose, distribute, print or copy this email or any part of it if you are not the intended recipient ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted-Engine misc configuration
- Original Message - From: Yedidyah Bar David d...@redhat.com To: Jaicel jai...@asti.dost.gov.ph Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 10:20:35 AM Subject: Re: [ovirt-users] Hosted-Engine misc configuration - Original Message - From: Jaicel jai...@asti.dost.gov.ph To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 9:52:28 AM Subject: Re: [ovirt-users] Hosted-Engine misc configuration i attached the setup log. Seems from the log that the storage space was not empty - perhaps left over from a previous attempt or something like that. You might have had locking issues etc. If you want to further debug this, please try again, and then check/post: vdsm: logs from /var/log/vdsm sanlock: logs from /var/log/sanlock.log output of 'sanlock -D' Otherwise, it might be simpler to just start from scratch: reinstall OS on host clean up storage space yum install and deploy again hosted-engine. If it then fails again, please check/post above logs (including hosted-engine). And also send output of 'rpm -qa'. Thanks. Best, -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted-Engine misc configuration
Hi, here's the rpm -qa output. Thanks, Jaicel - Original Message - From: Yedidyah Bar David d...@redhat.com To: Jaicel jai...@asti.dost.gov.ph Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 3:24:27 PM Subject: Re: [ovirt-users] Hosted-Engine misc configuration - Original Message - From: Yedidyah Bar David d...@redhat.com To: Jaicel jai...@asti.dost.gov.ph Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 10:20:35 AM Subject: Re: [ovirt-users] Hosted-Engine misc configuration - Original Message - From: Jaicel jai...@asti.dost.gov.ph To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 9:52:28 AM Subject: Re: [ovirt-users] Hosted-Engine misc configuration i attached the setup log. Seems from the log that the storage space was not empty - perhaps left over from a previous attempt or something like that. You might have had locking issues etc. If you want to further debug this, please try again, and then check/post: vdsm: logs from /var/log/vdsm sanlock: logs from /var/log/sanlock.log output of 'sanlock -D' Otherwise, it might be simpler to just start from scratch: reinstall OS on host clean up storage space yum install and deploy again hosted-engine. If it then fails again, please check/post above logs (including hosted-engine). And also send output of 'rpm -qa'. Thanks. Best, -- Didi versions Description: Binary data ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted-Engine misc configuration
actually i just recently reinstalled CentOS on the server as well as the freenas server before i tried installing ovirt. but, okay i will try reinstalling centos and recreate the volume to make sure that the volume is empty and i will post the said logs. Thanks, Jaicel - Original Message - From: Yedidyah Bar David d...@redhat.com To: Jaicel jai...@asti.dost.gov.ph Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 3:20:35 PM Subject: Re: [ovirt-users] Hosted-Engine misc configuration - Original Message - From: Jaicel jai...@asti.dost.gov.ph To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, March 31, 2015 9:52:28 AM Subject: Re: [ovirt-users] Hosted-Engine misc configuration i attached the setup log. Seems from the log that the storage space was not empty - perhaps left over from a previous attempt or something like that. You might have had locking issues etc. If you want to further debug this, please try again, and then check/post: vdsm: logs from /var/log/vdsm sanlock: logs from /var/log/sanlock.log output of 'sanlock -D' Otherwise, it might be simpler to just start from scratch: reinstall OS on host clean up storage space yum install and deploy again hosted-engine. If it then fails again, please check/post above logs (including hosted-engine). Thanks and best regards, -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Guest PXE boot with 2 NICs : MAC order
Le 31/03/2015 09:21, Sven Kieske a écrit : You should file an RFE on bugzilla for this kind of stuff and maybe raise awareness during the weekly meeting on irc. this increases the chance of an implementation taking place dramatically ;) HTH Hi Sven, I found and append this : https://bugzilla.redhat.com/show_bug.cgi?id=1045022 -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modules sanlock are not configured
Hey guys, Probably the problem is that sanlock service cannot stop properly - was the host registered to another ovirt engine before and you missed to put it on maintenance before adding it to another system? Such issue raised before when sanlock service fails to stop - can you explicitly check if does - service sanlock stop - fail or pass? If it fails it means that some leases are still locked and reboot will solve the issue. If that is not the case please share the output of groups sanlock - it should be - sanlock : sanlock disk kvm qemu after the call to - vdsm-tool configure --module sanlock --force (fyi all this configure call does is to add sanlock user to those groups in this case) Hope the information helps. Please share your progress with the issue. Yaniv Bronhaim. On 03/31/2015 10:15 AM, Bloemen, Jurriën wrote: I did that also. I forgot to mention it because you only have to run --force if you didn’t stop the sanlock process of running. The result of with and without is the same. Still the vdsmd process cannot start. From: Roy Golan rgo...@redhat.commailto:rgo...@redhat.com Date: Monday 30 March 2015 23:25 To: Jurriën Bloemen jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloe...@dmc.amcnetworks.com Cc: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Modules sanlock are not configured On Mar 30, 2015 10:45 PM, Jurriën jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloe...@dmc.amcnetworks.com wrote: Hi all, I have CentOS 7 running and I added the oVirt 3.5 repo to it. I open the oVirt Manager and added a new system to it. The manager says installing and after that is fails to connect. Looking on the system I see: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running mkdirs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_coredump Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_vdsm_logs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running wait_for_network Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running run_init_hooks Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running upgraded_version_check Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running check_is_configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Error: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: One of the modules is not configured to work with VDSM. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: To configure the module use the following: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure [--module module-name]'. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: If all modules are not configured try to use: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure --force' Mar 30 21:09:37 vdsmd_init_common.sh[7106]: (The force flag will stop the module's service and start it Mar 30 21:09:37 vdsmd_init_common.sh[7106]: afterwards automatically to load the new configuration.) Mar 30 21:09:37 vdsmd_init_common.sh[7106]: libvirt is already configured for vdsm Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Modules sanlock are not configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: stopped during execute check_is_configured task (task returned with error code 1). So I run vdsm-tool configure after I stop sanlock. # vdsm-tool configure Try adding --force (this is what the log suggests) Checking configuration status... libvirt is already configured for vdsm SUCCESS: ssl configured to true. No conflicts Running configure... Reconfiguration of sanlock is done. Done configuring modules to VDSM. But when I want to start vdsmd it still gives the error that sanlock is not configured. Does somebody has a solution for this? I am a bit lost on this… Google only tells me that there was a bug in 3.4. Thanks in advance, Jurriën This message (including any attachments) may contain information that is privileged or confidential. If you are not the intended recipient, please notify the sender and delete this email immediately from your systems and destroy all copies of it. You may not, directly or indirectly, use, disclose, distribute, print or copy this email or any part of it if you are not the intended recipient ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Yaniv Bronhaim. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Guest PXE boot with 2 NICs : MAC order
Indeed, if you're using oVirt 3.4 and up, and you supply all the NICs whenever you create the VM (not afterwards - as part of the new VM dialog), the NICs should receive MAC addresses according to their ordering by names, e.g. nic1 will always get a lower MAC address than nic2. For a newly-created VM this should guarantee that nic1 will indeed end up the first NIC inside the guest OS and be used by PXE. If this is something you do a lot, then I'd suggest creating a new template as such and create VMs from that. On 31/03/15 11:23, Nicolas Ecarnot wrote: Le 31/03/2015 09:21, Sven Kieske a écrit : You should file an RFE on bugzilla for this kind of stuff and maybe raise awareness during the weekly meeting on irc. this increases the chance of an implementation taking place dramatically ;) HTH Hi Sven, I found and append this : https://bugzilla.redhat.com/show_bug.cgi?id=1045022 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modules sanlock are not configured
Hi all, First of all thanks Yaniv for your reply! This is a fresh new installed system. It was not registered to another oVirt engine before. So... The output of groups sanlock² is sanlock : sanlock disk qemu KVM is missing. There is no kvm group at all or user for that matter!? I ran the command vdsm-tool configure --module sanlock ‹force² and after that ³groups sanlock² but it shows the same output as above. Do you have other ideas what to check? Thanks in advance, Jurriën On 31/03/15 10:23, ybronhei ybron...@redhat.com wrote: Hey guys, Probably the problem is that sanlock service cannot stop properly - was the host registered to another ovirt engine before and you missed to put it on maintenance before adding it to another system? Such issue raised before when sanlock service fails to stop - can you explicitly check if does - service sanlock stop - fail or pass? If it fails it means that some leases are still locked and reboot will solve the issue. If that is not the case please share the output of groups sanlock - it should be - sanlock : sanlock disk kvm qemu after the call to - vdsm-tool configure --module sanlock --force (fyi all this configure call does is to add sanlock user to those groups in this case) Hope the information helps. Please share your progress with the issue. Yaniv Bronhaim. On 03/31/2015 10:15 AM, Bloemen, Jurriën wrote: I did that also. I forgot to mention it because you only have to run --force if you didn¹t stop the sanlock process of running. The result of with and without is the same. Still the vdsmd process cannot start. From: Roy Golan rgo...@redhat.commailto:rgo...@redhat.com Date: Monday 30 March 2015 23:25 To: Jurriën Bloemen jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloemen@dmc.amcnetwor ks.com Cc: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Modules sanlock are not configured On Mar 30, 2015 10:45 PM, Jurriën jurrien.bloe...@dmc.amcnetworks.commailto:Jurrien.Bloemen@dmc.amcnetwor ks.com wrote: Hi all, I have CentOS 7 running and I added the oVirt 3.5 repo to it. I open the oVirt Manager and added a new system to it. The manager says installing and after that is fails to connect. Looking on the system I see: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running mkdirs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_coredump Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_vdsm_logs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running wait_for_network Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running run_init_hooks Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running upgraded_version_check Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running check_is_configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Error: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: One of the modules is not configured to work with VDSM. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: To configure the module use the following: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure [--module module-name]'. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: If all modules are not configured try to use: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure --force' Mar 30 21:09:37 vdsmd_init_common.sh[7106]: (The force flag will stop the module's service and start it Mar 30 21:09:37 vdsmd_init_common.sh[7106]: afterwards automatically to load the new configuration.) Mar 30 21:09:37 vdsmd_init_common.sh[7106]: libvirt is already configured for vdsm Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Modules sanlock are not configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: stopped during execute check_is_configured task (task returned with error code 1). So I run vdsm-tool configure after I stop sanlock. # vdsm-tool configure Try adding --force (this is what the log suggests) Checking configuration status... libvirt is already configured for vdsm SUCCESS: ssl configured to true. No conflicts Running configure... Reconfiguration of sanlock is done. Done configuring modules to VDSM. But when I want to start vdsmd it still gives the error that sanlock is not configured. Does somebody has a solution for this? I am a bit lost on thisŠ Google only tells me that there was a bug in 3.4. Thanks in advance, Jurriën This message (including any attachments) may contain information that is privileged or confidential. If you are not the intended recipient, please notify the sender and delete this email immediately from your systems and destroy all copies of it. You may not, directly or indirectly, use, disclose, distribute, print or copy this email or any part of it if you are not the intended recipient ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Yaniv Bronhaim.
Re: [ovirt-users] oVirt management network
The situation you got to (where there are ovirtmgmt bridges over both bond0 directly and over the bond0.231 VLAN device), likely via manual intervention, is indeed inconsistent from oVirt's perspective. You should be able to SSH into the host and run something like brctl delif ovirtmgmt bond0, then refresh capabilities on the webadmin console and get to a situation where ovirtmgmt is configured only on top of the VLAN device. Succeeding networking operations on the host should then work as expected... On 31/03/15 14:03, Bojan Popovic wrote: Of course. Here it is: net As you can see on the lower part of the screenshot, ovirtmgmt is on top of the bond0.231 interface and on top of bond0 also. I would like to remove bond0 from the bridge, cause it blocks every other operation using this dialog, whatever I try to change I'm only able to cancel it because I am confronted with the following: problem Thanks for the help. On 31.03.2015. 12:52, Lior Vernia wrote: Hello Bojan, I'm still having difficulties understanding the exact situation. Could you please click the Refresh Capabilities button in the hosts tab when the relevant host is selected and supply a screenshot of the Setup Host Networks dialog on that host afterwards. Then explain what about that situation you'd like to change. Yours, Lior. On 31/03/15 12:12, Bojan Popovic wrote: I have a hosted engine. It is on the same VLAN as the hosts are, so I am not having connectivity issues. I am not going to alter that part of the setup but I do need to add more networks, and I can not because I can not save the configuration, no matter what I change it is not saved. Ovirtmgmt is vlan-tagged. Is there some config file that can be edited manually, or maybe it can be done in the database? On 30.03.2015. 13:32, Dan Kenigsberg wrote: On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote: Hello, I am having a strange issue in creating ovirtmgmt bridge over vlan interface. I have set-up a bond from physical interfaces. On top of a bond there are three VLANs one of which is in ovirtmgmt bridge. I have set it up manually according to http://www.ovirt.org/Bonding_VLAN_Bridge Somehow the bond itself is also added to bridge in oVirt web interface, after reboot there also were two added lines to configuration of that bond: # Generated by VDSM version 4.16.10-8.gitc937927.el7 BRIDGE=ovirtmgmt No matter how I try to remove the bond from the bridge it doesn't succeed. If I edit the config files manually it isn't replicated to web interface. If I try to detach it from web interface, I can only attach bridge back to the bond interface. Of course configuration cannot be saved until the bridge is attached to an interface. I have tried putting the host in maintenance mode, shutting down the hosted engine and doing all the changes live. Anyone has a suggestion how to resolve this? I'd first like to understand how you intend for management traffic to travel from your Engine to the host. Do you have a vlan connection between the two? What is the host's IP address on that vlan? Since you have connectivity to the host, we can tell that you have un-tagged traffic to the host. In most (sane) cases, the IP address on the untagged network is different from the vlan'ed one. To use the latter, you'd need to remove the host from the cluster, and add it back with its second address. Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to have a special hack for this host? Regards, Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] firewalld rules for engine
Hi, After running engine-setup (3.5.2rc2) on Centos 7, the setup tells me the following In order to configure firewalld, copy the files from /etc/ovirt-engine/firewalld to /etc/firewalld/services and execute the following commands: firewall-cmd -service ovirt-nfs firewall-cmd -service ovirt-postgres firewall-cmd -service ovirt-https firewall-cmd -service ovirt-fence-kdump-listener firewall-cmd -service ovirt-websocket-proxy firewall-cmd -service ovirt-http The commands above don't work, shouldn't they be: firewall-cmd --permanent --add-service ovirt-nfs firewall-cmd --permanent --add-service ovirt-postgres firewall-cmd --permanent --add-service ovirt-https firewall-cmd --permanent --add-service ovirt-fence-kdump-listener firewall-cmd --permanent --add-service ovirt-websocket-proxy firewall-cmd --permanent --add-service ovirt-http firewall-cmd --reload Kind regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] firewalld rules for engine
- Original Message - From: Jorick Astrego j.astr...@netbulae.eu To: users@ovirt.org Sent: Tuesday, March 31, 2015 2:07:02 PM Subject: [ovirt-users] firewalld rules for engine Hi, After running engine-setup (3.5.2rc2) on Centos 7, the setup tells me the following In order to configure firewalld, copy the files from /etc/ovirt-engine/firewalld to /etc/firewalld/services and execute the following commands: firewall-cmd -service ovirt-nfs firewall-cmd -service ovirt-postgres firewall-cmd -service ovirt-https firewall-cmd -service ovirt-fence-kdump-listener firewall-cmd -service ovirt-websocket-proxy firewall-cmd -service ovirt-http The commands above don't work, shouldn't they be: firewall-cmd --permanent --add-service ovirt-nfs firewall-cmd --permanent --add-service ovirt-postgres firewall-cmd --permanent --add-service ovirt-https firewall-cmd --permanent --add-service ovirt-fence-kdump-listener firewall-cmd --permanent --add-service ovirt-websocket-proxy firewall-cmd --permanent --add-service ovirt-http firewall-cmd --reload Yes, I guess no-one noticed yet :-) Pushed [1] now. Thanks! [1] https://gerrit.ovirt.org/39390 -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Guest PXE boot with 2 NICs : MAC order
Hi Lior, Le 31/03/2015 12:55, Lior Vernia a écrit : Indeed, if you're using oVirt 3.4 and up, and you supply all the NICs whenever you create the VM (not afterwards - as part of the new VM dialog), the NICs should receive MAC addresses according to their ordering by names, e.g. nic1 will always get a lower MAC address than nic2. For a newly-created VM this should guarantee that nic1 will indeed end up the first NIC inside the guest OS and be used by PXE. In the BZ I provided above, I explain that my tests are showing that this is not true : the nics are not yet sorted according to their MAC nor their names. I'm using 3.5.1 If this is something you do a lot, then I'd suggest creating a new template as such and create VMs from that. I know that could be a way, but this is not our strategy, as we prefer using kickstart and we have so many different setups that factorisation is not possible. On 31/03/15 11:23, Nicolas Ecarnot wrote: Le 31/03/2015 09:21, Sven Kieske a écrit : You should file an RFE on bugzilla for this kind of stuff and maybe raise awareness during the weekly meeting on irc. this increases the chance of an implementation taking place dramatically ;) HTH Hi Sven, I found and append this : https://bugzilla.redhat.com/show_bug.cgi?id=1045022 -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Guest PXE boot with 2 NICs : MAC order
On 31/03/15 14:21, Nicolas Ecarnot wrote: Hi Lior, Le 31/03/2015 12:55, Lior Vernia a écrit : Indeed, if you're using oVirt 3.4 and up, and you supply all the NICs whenever you create the VM (not afterwards - as part of the new VM dialog), the NICs should receive MAC addresses according to their ordering by names, e.g. nic1 will always get a lower MAC address than nic2. For a newly-created VM this should guarantee that nic1 will indeed end up the first NIC inside the guest OS and be used by PXE. In the BZ I provided above, I explain that my tests are showing that this is not true : the nics are not yet sorted according to their MAC nor their names. I'm using 3.5.1 I see. It seems MAC addresses are allocated according to the NIC name order, and that they are also named in the corresponding order within the guest OS. So the only problem here is how gPXE chooses a NIC to boot from... I'm not familiar with the behavior of gPXE, but oVirt seems to behave alright. If this is something you do a lot, then I'd suggest creating a new template as such and create VMs from that. I know that could be a way, but this is not our strategy, as we prefer using kickstart and we have so many different setups that factorisation is not possible. On 31/03/15 11:23, Nicolas Ecarnot wrote: Le 31/03/2015 09:21, Sven Kieske a écrit : You should file an RFE on bugzilla for this kind of stuff and maybe raise awareness during the weekly meeting on irc. this increases the chance of an implementation taking place dramatically ;) HTH Hi Sven, I found and append this : https://bugzilla.redhat.com/show_bug.cgi?id=1045022 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt management network
I have a hosted engine. It is on the same VLAN as the hosts are, so I am not having connectivity issues. I am not going to alter that part of the setup but I do need to add more networks, and I can not because I can not save the configuration, no matter what I change it is not saved. Ovirtmgmt is vlan-tagged. Is there some config file that can be edited manually, or maybe it can be done in the database? On 30.03.2015. 13:32, Dan Kenigsberg wrote: On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote: Hello, I am having a strange issue in creating ovirtmgmt bridge over vlan interface. I have set-up a bond from physical interfaces. On top of a bond there are three VLANs one of which is in ovirtmgmt bridge. I have set it up manually according to http://www.ovirt.org/Bonding_VLAN_Bridge Somehow the bond itself is also added to bridge in oVirt web interface, after reboot there also were two added lines to configuration of that bond: # Generated by VDSM version 4.16.10-8.gitc937927.el7 BRIDGE=ovirtmgmt No matter how I try to remove the bond from the bridge it doesn't succeed. If I edit the config files manually it isn't replicated to web interface. If I try to detach it from web interface, I can only attach bridge back to the bond interface. Of course configuration cannot be saved until the bridge is attached to an interface. I have tried putting the host in maintenance mode, shutting down the hosted engine and doing all the changes live. Anyone has a suggestion how to resolve this? I'd first like to understand how you intend for management traffic to travel from your Engine to the host. Do you have a vlan connection between the two? What is the host's IP address on that vlan? Since you have connectivity to the host, we can tell that you have un-tagged traffic to the host. In most (sane) cases, the IP address on the untagged network is different from the vlan'ed one. To use the latter, you'd need to remove the host from the cluster, and add it back with its second address. Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to have a special hack for this host? Regards, Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How to Config Openvswitch in Hosted-Engine environment(ALL IN ONE) when using Neutron?
Hi, Lior, On 03/30/2015 04:01 PM, Lior Vernia wrote: Hello, You're right. It might be something we should consider adding in the hosted engine script - maybe a flag to also install the Neutron agent packages?... For now, there should be an easy workaround as long as you have more than one host in your deployment. You could put one host in maintenance, reinstall it from the webadmin console while specifying an external provider, then once that's done do the same for the other host(s). Thank you for telling us such a method. First, I made an OSP5 using packstack with a default answerfile. and I found neutron is vxlan mode. Then, we reinstalled the host, and we tried to config the plugin.ini file, however we did not find br-tun in my host. How do slove it, create br-tun manually(then what?) or others? any idea? #- # Sample Configurations. #- ... snip ... # # 3. With VXLAN tunneling. # [ovs] # network_vlan_ranges = # tenant_network_type = vxlan # tunnel_type = vxlan # tunnel_id_ranges = 1:1000 # integration_bridge = br-int # tunnel_bridge = br-tun # local_ip = 10.0.0.3 # [agent] # tunnel_types = vxlan # ip addr | grep br-int 17: br-int: BROADCAST,MULTICAST mtu 1500 qdisc noop state DOWN # ip addr | grep br-tun Regards, Jian Yours, Lior. On 30/03/15 06:49, Xie, Chao wrote: HI, ALL As you may know, we can use neutron service in oVirt. And in a normal oVirt environment, When adding a Host, Openswitch and RabbitMQ and so on (Set Network provider in New Hosts window in Admin Portal) will be configure automatically in the host. But in an HE environment, we do not add host in Admin Portal(but hosted-engine --deploy command ), and i think host will not be configure automatically. So anybody know how to use it (neutron from all in one OSP )? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
On Tue, Mar 31, 2015 at 02:36:55PM +0200, Christophe Fergeau wrote: On Tue, Mar 31, 2015 at 02:14:28PM +0200, Uwe Laverenz wrote: Hi all, Am 25.02.2015 um 09:31 schrieb Christophe Fergeau: The Windows clients have installed Windows 7 Enterprise gets from Windows MSDNAA and it is installed in all machines here in our University. If you need some other information, please, feel free to ask me. I'm asking about remote-viewer (Windows SPICE client ;). Where did you get it from, and what version is it? I see the same problem. The SPICE-Client ist the latest version from here: http://virt-manager.org/download/ It's VirtViewer 2.0.256 for Windows and the problem is, that if you try to connect an USB device you only get an info dialog stating USB redirection support not compiled in. This is the same behaviour as in client version 1.0256. I guess this feature simply doesn't exist in the Windows client (yet)? Ah this is indeed disabled in the mingw-spice-gtk build used for that binary: http://pkgs.fedoraproject.org/cgit/mingw-spice-gtk.git/tree/mingw-spice-gtk.spec#n136 (see the --disable-usbredir configure argument) This scratch build of mingw-spice-gtk has usb redirection enabled, but I don't know if more is needed for everything to work (usbclerk/usbdk?): http://koji.fedoraproject.org/koji/taskinfo?taskID=9379283 Christophe pgpns7wB5BH2k.pgp Description: PGP signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Guest PXE boot with 2 NICs : MAC order
Le 31/03/2015 14:48, Lior Vernia a écrit : I see. It seems MAC addresses are allocated according to the NIC name order, I'm not sure this is exact. According to what I'm witnessing, MAC addresses are allocated in incremental order, from the first free MAC address in the MAC pool range. My question is as follows: when you create a VM, and add NICs as part of the new VM dialog (using the widget at the bottom), have you ever encountered a situation where a higher-named NIC got a lower MAC address? Absolutely YES. I just repeated this test, and it is easy to reproduce : in a MAC pool, manage to free some lower MAC addresses, and the will get allocated from the first free in the pool. And I found this behaviour SOUND. Don't change it. So the only problem here is how gPXE chooses a NIC to boot from... I'm not familiar with the behavior of gPXE, but oVirt seems to behave alright. I mostly agree with that, in the sense that one has to dig in which way gPXE is sorting the NICs, ie mapping the MACs to its net0, net1, and so on. That's the key point here for me, as it's difficult to predict the behavior of n'importe quel piece of software... :) Thanks for your explanation, though I think the present way oVirt is assigning the MACs and naming the interfaces are not bad and should not change. The key point is how to make oVirt force gPXE to use the interface we want, whatever its name or its MAC. If possible? It seems I'm not the first one to deal with this issue : http://etherboot.org/pipermail/gpxe/2011-September/001742.html -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modules sanlock are not configured
On 03/31/2015 02:07 PM, Bloemen, Jurriën wrote: Hi all, First of all thanks Yaniv for your reply! Sure. Anytime Basically kvm group should be created by qemu rpm installation, so first check egrep kvm /etc/group - it should return kvm:x:36:qemu,sanlock if your system is installed properly If not, please tell me the output of rpm -qa | grep qemu-kvm And just to be on the same side write me also what vdsm version you use there Yaniv. This is a fresh new installed system. It was not registered to another oVirt engine before. So... The output of groups sanlock² is sanlock : sanlock disk qemu KVM is missing. There is no kvm group at all or user for that matter!? I ran the command vdsm-tool configure --module sanlock ‹force² and after that ³groups sanlock² but it shows the same output as above. Do you have other ideas what to check? Thanks in advance, Jurriën On 31/03/15 10:23, ybronhei ybron...@redhat.com wrote: Hey guys, Probably the problem is that sanlock service cannot stop properly - was the host registered to another ovirt engine before and you missed to put it on maintenance before adding it to another system? Such issue raised before when sanlock service fails to stop - can you explicitly check if does - service sanlock stop - fail or pass? If it fails it means that some leases are still locked and reboot will solve the issue. If that is not the case please share the output of groups sanlock - it should be - sanlock : sanlock disk kvm qemu after the call to - vdsm-tool configure --module sanlock --force (fyi all this configure call does is to add sanlock user to those groups in this case) Hope the information helps. Please share your progress with the issue. Yaniv Bronhaim. On 03/31/2015 10:15 AM, Bloemen, Jurriën wrote: I did that also. I forgot to mention it because you only have to run --force if you didn¹t stop the sanlock process of running. The result of with and without is the same. Still the vdsmd process cannot start. From: Roy Golan rgo...@redhat.commailto:rgo...@redhat.com Date: Monday 30 March 2015 23:25 To: Jurriën Bloemen jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloemen@dmc.amcnetwor ks.com Cc: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Modules sanlock are not configured On Mar 30, 2015 10:45 PM, Jurriën jurrien.bloe...@dmc.amcnetworks.commailto:Jurrien.Bloemen@dmc.amcnetwor ks.com wrote: Hi all, I have CentOS 7 running and I added the oVirt 3.5 repo to it. I open the oVirt Manager and added a new system to it. The manager says installing and after that is fails to connect. Looking on the system I see: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running mkdirs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_coredump Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_vdsm_logs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running wait_for_network Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running run_init_hooks Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running upgraded_version_check Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running check_is_configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Error: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: One of the modules is not configured to work with VDSM. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: To configure the module use the following: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure [--module module-name]'. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: If all modules are not configured try to use: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure --force' Mar 30 21:09:37 vdsmd_init_common.sh[7106]: (The force flag will stop the module's service and start it Mar 30 21:09:37 vdsmd_init_common.sh[7106]: afterwards automatically to load the new configuration.) Mar 30 21:09:37 vdsmd_init_common.sh[7106]: libvirt is already configured for vdsm Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Modules sanlock are not configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: stopped during execute check_is_configured task (task returned with error code 1). So I run vdsm-tool configure after I stop sanlock. # vdsm-tool configure Try adding --force (this is what the log suggests) Checking configuration status... libvirt is already configured for vdsm SUCCESS: ssl configured to true. No conflicts Running configure... Reconfiguration of sanlock is done. Done configuring modules to VDSM. But when I want to start vdsmd it still gives the error that sanlock is not configured. Does somebody has a solution for this? I am a bit lost on thisŠ Google only tells me that there was a bug in 3.4. Thanks in advance, Jurriën This message (including any attachments) may contain information that is privileged or confidential. If you are not the intended recipient, please notify the sender and delete this email immediately from your systems and
Re: [ovirt-users] Guest PXE boot with 2 NICs : MAC order
Le 31/03/2015 13:57, Lior Vernia a écrit : On 31/03/15 14:21, Nicolas Ecarnot wrote: Hi Lior, Le 31/03/2015 12:55, Lior Vernia a écrit : Indeed, if you're using oVirt 3.4 and up, and you supply all the NICs whenever you create the VM (not afterwards - as part of the new VM dialog), the NICs should receive MAC addresses according to their ordering by names, e.g. nic1 will always get a lower MAC address than nic2. For a newly-created VM this should guarantee that nic1 will indeed end up the first NIC inside the guest OS and be used by PXE. In the BZ I provided above, I explain that my tests are showing that this is not true : the nics are not yet sorted according to their MAC nor their names. I'm using 3.5.1 I see. It seems MAC addresses are allocated according to the NIC name order, I'm not sure this is exact. According to what I'm witnessing, MAC addresses are allocated in incremental order, from the first free MAC address in the MAC pool range. and that they are also named in the corresponding order within the guest OS. Er.. what gives when I'm naming my interfaces ethX, and amongst that, oVirt comes trying to add some nicX??? So the only problem here is how gPXE chooses a NIC to boot from... I'm not familiar with the behavior of gPXE, but oVirt seems to behave alright. I mostly agree with that, in the sense that one has to dig in which way gPXE is sorting the NICs, ie mapping the MACs to its net0, net1, and so on. And then, decide whether oVirt could have a control upon this sorting, and then issue a RFE to master it from the web GUI. -- Nicolas ECARNOT If this is something you do a lot, then I'd suggest creating a new template as such and create VMs from that. I know that could be a way, but this is not our strategy, as we prefer using kickstart and we have so many different setups that factorisation is not possible. On 31/03/15 11:23, Nicolas Ecarnot wrote: Le 31/03/2015 09:21, Sven Kieske a écrit : You should file an RFE on bugzilla for this kind of stuff and maybe raise awareness during the weekly meeting on irc. this increases the chance of an implementation taking place dramatically ;) HTH Hi Sven, I found and append this : https://bugzilla.redhat.com/show_bug.cgi?id=1045022 -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Storage domain not in pool issue
Hi Adam, Can you please take a look? By the provided information, there seems to be an issue of synchronization failure between engine and vdsm regarding the storage pool which the 2 domains are attached to. Thanks - Original Message - From: VONDRA Alain avon...@unicef.fr To: Elad Ben Aharon ebena...@redhat.com Cc: Idan Shaby ish...@redhat.com, users@ovirt.org, Allon Mureinik amure...@redhat.com Sent: Tuesday, 31 March, 2015 11:43:39 AM Subject: RE: [ovirt-users] Storage domain not in pool issue Hi, Here is the logs. Thanks Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr De : Elad Ben Aharon [mailto:ebena...@redhat.com] Envoyé : mardi 31 mars 2015 08:19 À : VONDRA Alain Cc : Idan Shaby; users@ovirt.org; Allon Mureinik Objet : Re: [ovirt-users] Storage domain not in pool issue Please attach /var/log/ovirt-engine/engine.log from engine and /var/log/vdsm/vdsm.log from the host(s). - Original Message - From: VONDRA Alain avon...@unicef.fr To: Elad Ben Aharon ebena...@redhat.com , Idan Shaby ish...@redhat.com Cc: users@ovirt.org Sent: Tuesday, 31 March, 2015 1:49:42 AM Subject: RE:[ovirt-users] Storage domain not in pool issue Hi, Is there anybody who can help me ? I have more than 6 month of work in these two storage domains... Thanks, Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr De : users-boun...@ovirt.org [users-boun...@ovirt.org] de la part de VONDRA Alain [avon...@unicef.fr] Envoyé : lundi 30 mars 2015 17:33 À : Elad Ben Aharon; Idan Shaby Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Hi, Is there anyother way to synchronize the engine and vdsm ? Thanks Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -Message d'origine- De : users-boun...@ovirt.org [ mailto:users-boun...@ovirt.org ] De la part de VONDRA Alain Envoyé : lundi 30 mars 2015 16:17 À : Elad Ben Aharon; Idan Shaby Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Elad, I’ve tried many times to restart the engine without success. Thanks De : Elad Ben Aharon [ mailto:ebena...@redhat.com ] Envoyé : lundi 30 mars 2015 16:00 À : VONDRA Alain; Idan Shaby Cc : users@ovirt.org Objet : Re: [ovirt-users] Storage domain not in pool issue Thanks for the input. From the input, it's clear that engine is not synchronized with vdsm regarding the storage pool which these 2 domains are attached to. I guess that ovirt-engine service restart would solve it, but I would like someone from DEV to take a look before doing so. Idan, can you please take a look? Thanks Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr From: VONDRA Alain avon...@unicef.fr To: Elad Ben Aharon ebena...@redhat.com Cc: users@ovirt.org Sent: Monday, 30 March, 2015 4:18:08 PM Subject: RE: [ovirt-users] Storage domain not in pool issue Thank you for your help ! I attempt to activate using oVirt GUI, in fact this SD was previously attached to the Data Center, and I had a crash on it, after a recover à my manager oVirt, I see all the VMs and SD up, but the VMs contained in the 2 bad Storage Domain didn’t go up, so I’ve tried to put the SD in maintenance, but now I can’t even activate this domain. I didn’t yet try to put the second bad SD in maintenance after that. id | storage_pool_id --+- --+- 072fbaa1-08f3-4a40-9f34-a5ca22dd1d74 | 37a291a4-6108-4bb9-af33-da88555ab3a9 | f422de63-8869-41ef-a782-8b0c9ee03c41 d7b9d7cc-f7d6-43c7-ae13-e720951657c9 | f422de63-8869-41ef-a782-8b0c9ee03c41 7e40772a-fe94-4fb2-94c4-6198bed04a6a | f422de63-8869-41ef-a782-8b0c9ee03c41 7e137867-953f-4fd5-a77a-f3bc18cd140e | f422de63-8869-41ef-a782-8b0c9ee03c41 1f6dec51-12a6-41ed-9d14-8f0ad4e062d2 | f422de63-8869-41ef-a782-8b0c9ee03c41 69ddb676-f423-43fc-af38-909bbedeef61 | f422de63-8869-41ef-a782-8b0c9ee03c41 (7 lignes) Thanks De : Elad Ben Aharon [ mailto:ebena...@redhat.com ] Envoyé : lundi 30 mars 2015 15:09 À : VONDRA Alain Cc : users@ovirt.org Objet : Re: [ovirt-users]
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
Hi all, Am 25.02.2015 um 09:31 schrieb Christophe Fergeau: The Windows clients have installed Windows 7 Enterprise gets from Windows MSDNAA and it is installed in all machines here in our University. If you need some other information, please, feel free to ask me. I'm asking about remote-viewer (Windows SPICE client ;). Where did you get it from, and what version is it? I see the same problem. The SPICE-Client ist the latest version from here: http://virt-manager.org/download/ It's VirtViewer 2.0.256 for Windows and the problem is, that if you try to connect an USB device you only get an info dialog stating USB redirection support not compiled in. This is the same behaviour as in client version 1.0256. I guess this feature simply doesn't exist in the Windows client (yet)? bye, Uwe ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modules sanlock are not configured
Hi, Please see the inline answers. Thanks in advance, Jurriën On 31/03/15 14:18, ybronhei ybron...@redhat.com wrote: On 03/31/2015 02:07 PM, Bloemen, Jurriën wrote: Hi all, First of all thanks Yaniv for your reply! Sure. Anytime Basically kvm group should be created by qemu rpm installation, so first check egrep kvm /etc/group - it should return kvm:x:36:qemu,sanlock if your system is installed properly egrep kvm /etc/group No result If not, please tell me the output of rpm -qa | grep qemu-kvm # rpm -qa | grep qemu-kvm qemu-kvm-rhev-1.5.3-60.el7_0.2.x86_64 qemu-kvm-tools-rhev-1.5.3-60.el7_0.2.x86_64 qemu-kvm-common-rhev-1.5.3-60.el7_0.2.x86_64 And just to be on the same side write me also what vdsm version you use There # rpm -qa | grep vdsm vdsm-xmlrpc-4.16.10-8.gitc937927.el7.noarch vdsm-jsonrpc-4.16.10-8.gitc937927.el7.noarch vdsm-python-zombiereaper-4.16.10-8.gitc937927.el7.noarch vdsm-python-4.16.10-8.gitc937927.el7.noarch vdsm-yajsonrpc-4.16.10-8.gitc937927.el7.noarch vdsm-4.16.10-8.gitc937927.el7.x86_64 vdsm-cli-4.16.10-8.gitc937927.el7.noarch Yaniv. This is a fresh new installed system. It was not registered to another oVirt engine before. So... The output of groups sanlock² is sanlock : sanlock disk qemu KVM is missing. There is no kvm group at all or user for that matter!? I ran the command vdsm-tool configure --module sanlock ‹force² and after that ³groups sanlock² but it shows the same output as above. Do you have other ideas what to check? Thanks in advance, Jurriën On 31/03/15 10:23, ybronhei ybron...@redhat.com wrote: Hey guys, Probably the problem is that sanlock service cannot stop properly - was the host registered to another ovirt engine before and you missed to put it on maintenance before adding it to another system? Such issue raised before when sanlock service fails to stop - can you explicitly check if does - service sanlock stop - fail or pass? If it fails it means that some leases are still locked and reboot will solve the issue. If that is not the case please share the output of groups sanlock - it should be - sanlock : sanlock disk kvm qemu after the call to - vdsm-tool configure --module sanlock --force (fyi all this configure call does is to add sanlock user to those groups in this case) Hope the information helps. Please share your progress with the issue. Yaniv Bronhaim. On 03/31/2015 10:15 AM, Bloemen, Jurriën wrote: I did that also. I forgot to mention it because you only have to run --force if you didn¹t stop the sanlock process of running. The result of with and without is the same. Still the vdsmd process cannot start. From: Roy Golan rgo...@redhat.commailto:rgo...@redhat.com Date: Monday 30 March 2015 23:25 To: Jurriën Bloemen jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloemen@dmc.amcnetw or ks.com Cc: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Modules sanlock are not configured On Mar 30, 2015 10:45 PM, Jurriën jurrien.bloe...@dmc.amcnetworks.commailto:Jurrien.Bloemen@dmc.amcnetw or ks.com wrote: Hi all, I have CentOS 7 running and I added the oVirt 3.5 repo to it. I open the oVirt Manager and added a new system to it. The manager says installing and after that is fails to connect. Looking on the system I see: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running mkdirs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_coredump Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_vdsm_logs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running wait_for_network Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running run_init_hooks Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running upgraded_version_check Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running check_is_configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Error: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: One of the modules is not configured to work with VDSM. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: To configure the module use the following: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure [--module module-name]'. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: If all modules are not configured try to use: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure --force' Mar 30 21:09:37 vdsmd_init_common.sh[7106]: (The force flag will stop the module's service and start it Mar 30 21:09:37 vdsmd_init_common.sh[7106]: afterwards automatically to load the new configuration.) Mar 30 21:09:37 vdsmd_init_common.sh[7106]: libvirt is already configured for vdsm Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Modules sanlock are not configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: stopped during execute check_is_configured task (task returned with error code 1). So I run vdsm-tool configure after I stop sanlock. # vdsm-tool
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
On Tue, Mar 31, 2015 at 02:14:28PM +0200, Uwe Laverenz wrote: Hi all, Am 25.02.2015 um 09:31 schrieb Christophe Fergeau: The Windows clients have installed Windows 7 Enterprise gets from Windows MSDNAA and it is installed in all machines here in our University. If you need some other information, please, feel free to ask me. I'm asking about remote-viewer (Windows SPICE client ;). Where did you get it from, and what version is it? I see the same problem. The SPICE-Client ist the latest version from here: http://virt-manager.org/download/ It's VirtViewer 2.0.256 for Windows and the problem is, that if you try to connect an USB device you only get an info dialog stating USB redirection support not compiled in. This is the same behaviour as in client version 1.0256. I guess this feature simply doesn't exist in the Windows client (yet)? Ah this is indeed disabled in the mingw-spice-gtk build used for that binary: http://pkgs.fedoraproject.org/cgit/mingw-spice-gtk.git/tree/mingw-spice-gtk.spec#n136 (see the --disable-usbredir configure argument) Christophe pgpDmjshdWn9f.pgp Description: PGP signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Snapshot issue
Worked perfectly!!! BIG thanks Omer!!! All my VM's are back up. Nothing lost! SOLVED!!! 2015-03-31 9:53 GMT+02:00 Omer Frenkel ofren...@redhat.com: - Original Message - From: Koen Vanoppen vanoppen.k...@gmail.com To: Omer Frenkel ofren...@redhat.com, users@ovirt.org Sent: Tuesday, March 31, 2015 7:35:57 AM Subject: Re: [ovirt-users] Snapshot issue I just wanted to remove the snapshots in ovirt... That's all... And now they are locked. Without the possibility to remove, reboot the vm or cancel the snapshots... So I'm stuck... How can I change the status of the snapshot in the db, so that at least I can remove the VM? And what could be the impact , worst case? i thought you want to save the vm, then the worst case might be data corruption, in case something is really wrong with the snapshots and you try to run the vm. more optimistic, in case snapshot is missing in storage but not deleted in db, vm would fail to start, then you might be able to just delete the snapshot (again probably only manually in db) and recover completely. if you just want to delete the vm, worst case would be that you have to clear manually stuff from the db/storage if you decide to change the db, better to have a backup :) also, i would recommend making it when the engine is down. ok, so, first to get the info in the db: select snapshot_id,description,status from snapshots where status = 'LOCKED' and vm_id in (select vm_guid from vm_static where vm_name='vm name here'); just update it to be 'OK' : update snapshots set status = 'OK' where snapshot_id = 'snapshot id from previous query'; also, check there are locked images related to this snapshot: select image_guid,imagestatus from images where vm_snapshot_id = 'snapshot id from previous query' and imagestatus != 1; if so, need to unlock it as well: updates images set imagestatus = 1 where image_guid = 'id of images from previous query'; let me know how it went Kind regards, 2015-03-30 13:46 GMT+02:00 Omer Frenkel ofren...@redhat.com: - Original Message - From: Koen Vanoppen vanoppen.k...@gmail.com To: Omer Frenkel ofren...@redhat.com, users@ovirt.org Sent: Monday, March 30, 2015 7:44:10 AM Subject: Re: [ovirt-users] Snapshot issue I can't even remove them... Something needs to be done... Any ideas? not sure i understand what you tried? the 'broken' snapshots are locked, so you can't remove them. as i said, there is no easy and safe way to fix this... you can try to change the status of the snapshot in the db - but i am not sure what will happen! 2015-03-25 8:45 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com: Hi Omer, Thanks for your reply. I was cleaning our snapshots on oVirt. So I started deleting snapshots one by one. In total in deleted 10 snapshots. 5 VM's came back up, without the error message, the rest of them are still down with this error message. 2015-03-25 7:36 GMT+01:00 Omer Frenkel ofren...@redhat.com: - Original Message - From: Koen Vanoppen vanoppen.k...@gmail.com To: users@ovirt.org Sent: Wednesday, March 25, 2015 8:09:17 AM Subject: Re: [ovirt-users] Snapshot issue I'm still not able to start my VM's: Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again... I already restarted the vdsm deamons on the hypervisors and restarted the engine too... Does anybody has any clue how I can solve this state? Kind regards, Koen 2015-03-24 7:45 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com : This is in the logs: 2015-03-24 07:41:50,436 WARN [org.ovirt.engine.core.bll.RunVmCommand] (ajp--127.0.0.1-8702-12) [686c18ce] CanDoAction of action RunVm failed for user Reasons: VAR__ACTION__RUN,VAR__TYPE__VM,ACTION_TYPE_FAILED_VM_IS_DURING_SNAPSHOT Can't I clear all this? Because I Still have several machines down due the reason he is still in the cannot run VM... state... this happens because you have a snapshot in status locked, probably you did some operation on snapshot and something went wrong (it might have failed without clearing the state..) there is no easy and safe way to fix this (you can change the status of the snapshot in the db but i am not sure what will happen) what action did you do with snapshots on this vm? what was the result? 2015-03-23 8:40 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com : Dear all, I have the following problem: Cannot run VM. The VM is performing an operation on a Snapshot. Please wait for the
Re: [ovirt-users] VDSM memory consumption
Finally got a chance to implement this, so testing this on my centos7 hosts,
and it looks good. I’ll keep eye on it for a couple days, but after a couple of
hours, there’s no evidence of any leakage.
On Mar 30, 2015, at 4:14 PM, John Taylor jtt77...@yahoo.com wrote:
Dan Kenigsberg dan...@redhat.com writes:
On Sat, Mar 28, 2015 at 10:20:25AM -0400, John Taylor wrote:
Daniel Helgenberger daniel.helgenber...@m-box.de writes:
Hello Everyone,
I did create the original BZ on this. In the mean time, lab system I
used is dismantled and the production system is yet to deploy.
As I wrote in BZ1147148 [1], I experienced two different issues. One,
one big mem leak of about 15MiB/h and a smaller one, ~300KiB. These seem
unrelated.
The larger leak was indeed related to SSL in some way; not necessarily
M2Crypto. However, after disabling SSL this was gone leaving the smaller
leak.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1147148
I think there are, at least for the purpose of this discussion, 3 leaks:
1. the M2Crypto leak
2. a slower leak
3. a large leak that's not M2Crypto related that's part of sampling
My efforts have been around finding the source of my larger leak, which
I think is #3. I had disabled ssl so I knew that M2Crypto
isn't/shouldn't be the problem as in bz1147148, and ssl is beside the
point as it happens with a deactived host. It's part of sampling which
always runs.
What I've found is, after trying to get the smallest reproducer, that
it's not the netlink.iter_links that I commented on in [1] that is the
problem. But in the _get_intefaces_and_samples loop is the call to
create an InterfaceSample and that has getLinkSpeed() which, for vlans,
ends up calling ipwrapper.getLink, and that to
netlink.get_link(name)
netlink.get_link(name) *is* the source of my big leak. This is vdsm
4.16.10, so it is [2] and it's been changed in master for the removal of
support for libnl v1 so it might not be a problem anymore.
def get_link(name):
Returns the information dictionary of the name specified link.
with _pool.socket() as sock:
with _nl_link_cache(sock) as cache:
link = _rtnl_link_get_by_name(cache, name)
if not link:
raise IOError(errno.ENODEV, '%s is not present in the
system' %
name)
return _link_info(cache, link)
The libnl documentation note at [3] says that for the rtnl_link_get_by_name
function
Attention
The reference counter of the returned link object will be incremented.
Use rtnl_link_put() to release the reference.
So I took that hint, and made a change that does the rtnl_link_put() in
get_link(name) and it looks like it works for me.
diff oldnetlink.py netlink.py
67d66
return _link_info(cache, link)
68a68,70
li = _link_info(cache, link)
_rtnl_link_put(link)
return li
333a336,337
_rtnl_link_put = _none_proto(('rtnl_link_put', LIBNL_ROUTE))
Hope that helps. And if someone else could confirm that would be great.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1158108
[2]
https://gerrit.ovirt.org/gitweb?p=vdsm.git;a=blob;f=lib/vdsm/netlink.py;h=afae5cecb5ce701d00fb8f019ec92b3331a39036;hb=5608cfdf43db9186dabac4b2a779f9557e798968
[3]
http://www.infradead.org/~tgr/libnl/doc/api/group__link.html#ga1d583e4f0b43c89d854e5e681a529fad
Thanks, John, for a great detective work.
I'm afraid that with even on the master branch we keep calling
rtnl_link_get_link() and rtnl_link_get_by_name() without clearing the
reference count, so a fix is due there, too.
Would you consider posting a fully-fledged fix to gerrit? I still need
to understand what is the use of that refcount, so that we do not
release it too early.
Regards,
Dan.
Dan,
I'm happy to [1], although I've probably gotten something wrong with how
it's supposed to be done :) It's for the version I'm using so it's for
branch ovirt-3.5.
[1] https://gerrit.ovirt.org/#/c/39372/
Thanks,
-John
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modules sanlock are not configured
On 03/31/2015 03:34 PM, Bloemen, Jurriën wrote: Hi, Please see the inline answers. Thanks in advance, Jurriën Sorry that he took me awhile to check that (I didn't have el7 installation in hand) but now when checking that - please run: rpm -q --scripts qemu-kvm-common-rhev you'll see that this package creates the kvm group - useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \ -c qemu user qemu something went wrong with your installation and its hard to tell what. please try - yum reinstall qemu-kvm-common-rhev then check again egrep kvm /etc/group , if exists run vdsm-tool configure --force and start vdsm Let me know how it goes.. On 31/03/15 14:18, ybronhei ybron...@redhat.com wrote: On 03/31/2015 02:07 PM, Bloemen, Jurriën wrote: Hi all, First of all thanks Yaniv for your reply! Sure. Anytime Basically kvm group should be created by qemu rpm installation, so first check egrep kvm /etc/group - it should return kvm:x:36:qemu,sanlock if your system is installed properly egrep kvm /etc/group No result If not, please tell me the output of rpm -qa | grep qemu-kvm # rpm -qa | grep qemu-kvm qemu-kvm-rhev-1.5.3-60.el7_0.2.x86_64 qemu-kvm-tools-rhev-1.5.3-60.el7_0.2.x86_64 qemu-kvm-common-rhev-1.5.3-60.el7_0.2.x86_64 And just to be on the same side write me also what vdsm version you use There # rpm -qa | grep vdsm vdsm-xmlrpc-4.16.10-8.gitc937927.el7.noarch vdsm-jsonrpc-4.16.10-8.gitc937927.el7.noarch vdsm-python-zombiereaper-4.16.10-8.gitc937927.el7.noarch vdsm-python-4.16.10-8.gitc937927.el7.noarch vdsm-yajsonrpc-4.16.10-8.gitc937927.el7.noarch vdsm-4.16.10-8.gitc937927.el7.x86_64 vdsm-cli-4.16.10-8.gitc937927.el7.noarch Yaniv. This is a fresh new installed system. It was not registered to another oVirt engine before. So... The output of groups sanlock² is sanlock : sanlock disk qemu KVM is missing. There is no kvm group at all or user for that matter!? I ran the command vdsm-tool configure --module sanlock ‹force² and after that ³groups sanlock² but it shows the same output as above. Do you have other ideas what to check? Thanks in advance, Jurriën On 31/03/15 10:23, ybronhei ybron...@redhat.com wrote: Hey guys, Probably the problem is that sanlock service cannot stop properly - was the host registered to another ovirt engine before and you missed to put it on maintenance before adding it to another system? Such issue raised before when sanlock service fails to stop - can you explicitly check if does - service sanlock stop - fail or pass? If it fails it means that some leases are still locked and reboot will solve the issue. If that is not the case please share the output of groups sanlock - it should be - sanlock : sanlock disk kvm qemu after the call to - vdsm-tool configure --module sanlock --force (fyi all this configure call does is to add sanlock user to those groups in this case) Hope the information helps. Please share your progress with the issue. Yaniv Bronhaim. On 03/31/2015 10:15 AM, Bloemen, Jurriën wrote: I did that also. I forgot to mention it because you only have to run --force if you didn¹t stop the sanlock process of running. The result of with and without is the same. Still the vdsmd process cannot start. From: Roy Golan rgo...@redhat.commailto:rgo...@redhat.com Date: Monday 30 March 2015 23:25 To: Jurriën Bloemen jurrien.bloe...@dmc.amcnetworks.commailto:jurrien.bloemen@dmc.amcnetw or ks.com Cc: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Modules sanlock are not configured On Mar 30, 2015 10:45 PM, Jurriën jurrien.bloe...@dmc.amcnetworks.commailto:Jurrien.Bloemen@dmc.amcnetw or ks.com wrote: Hi all, I have CentOS 7 running and I added the oVirt 3.5 repo to it. I open the oVirt Manager and added a new system to it. The manager says installing and after that is fails to connect. Looking on the system I see: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running mkdirs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_coredump Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running configure_vdsm_logs Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running wait_for_network Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running run_init_hooks Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running upgraded_version_check Mar 30 21:09:37 vdsmd_init_common.sh[7106]: vdsm: Running check_is_configured Mar 30 21:09:37 vdsmd_init_common.sh[7106]: Error: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: One of the modules is not configured to work with VDSM. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: To configure the module use the following: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure [--module module-name]'. Mar 30 21:09:37 vdsmd_init_common.sh[7106]: If all modules are not configured try to use: Mar 30 21:09:37 vdsmd_init_common.sh[7106]: 'vdsm-tool configure --force' Mar 30 21:09:37
[ovirt-users] Anyone using YAML support in the RESTAPI?
Hello, Does anyone have a good reason to not remove the YAML support from the RESTAPI? As far as I know it isn't used or tested in any reasonable way, so I would like to remove it completely for 3.6. If anyone is using it and can't move to JSON or XML please speak up. Regards, Juan Hernandez -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] engine-setup fails with FATAL: Cannot execute sql command:
Hello All, Trying ovirt on centos 6.5 but fails at PostgreSQL configuration with error [ ERROR ] Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine/dbscripts/create_schema.sh' failed to execute Inside log it shows this 2015-03-31 17:47:15 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.db.schema plugin.execute:866 execute-output: ['/usr/share/ovirt-engine/dbscripts/schema.sh', '-s', 'localhost', '-p', '5432', '-u', 'engine', '-d', 'engine', '-l', '/var/log/ovirt-engine/setup/ovirt-engine-setup-20150331174256-pehvs7.log', '-c', 'apply'] stderr: psql:/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0210_change_group_ids.sql:59: ERROR: could not open relation with OID 32878 CONTEXT: SQL statement CREATE temp TABLE tmp_users_groups ON COMMIT DROP AS SELECT fnsplitteruuid(group_ids) AS group_id, user_id FROM users PL/pgSQL function __temp_change_group_ids_03_05_0210 line 35 at SQL statement FATAL: Cannot execute sql command: --file=/usr/share/ovirt-engine/dbscripts/upgrade/03_05_0210_change_group_ids.sql 2015-03-31 17:47:15 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.6/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/db/schema.py, line 291, in _misc oenginecons.EngineDBEnv.PGPASS_FILE File /usr/lib/python2.6/site-packages/otopi/plugin.py, line 871, in execute command=args[0], RuntimeError: Command '/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute 2015-03-31 17:47:15 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': Command '/usr/share/ovirt-engine/dbscripts/schema.sh' failed to execute Can some one please help me with this please ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
