Re: [ovirt-users] Prereqs for Self Hosted Engine Hyper Converged Gluster Support
On Mon, Aug 3, 2015 at 7:52 AM, Yedidyah Bar David d...@redhat.com wrote: On Mon, Aug 3, 2015 at 6:44 AM, Michael DePaulo mikedep...@gmail.com wrote: Hi, I am trying to follow these instructions on 3.6 alpha 3: http://www.ovirt.org/Features/Self_Hosted_Engine_Hyper_Converged_Gluster_Support The 1st time I ran ovirt-hosted-engine-setup (which was unsuccessful), What's exactly unsuccessful? Did it continue beyond the closeup stage? I saw the prompt: Do you want to configure this host for providing GlusterFS storage? (Yes, No)[No]: Now I no longer see it. Please check/post setup logs (of all relevant runs), from /var/log/ovirt-hosted-engine-setup Must gluster not have any peers or volumes already? Is there some other prereq that I am missing? Not sure, adding Sandro. If you're provisioning the gluster volume from within hosted-engine-setup it assumed that no gluster configuration was in place. If gluster is already configured and serving volumes it's assumed that the HE volumes has been allocated as well. Note that the official support for HC was postponed to 4.0 [1], but some parts were already implemented and should work. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1175354 Best, -- Didi -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] vhostmd
Thanks all of you, in that case I will try to build it my self... Rgds, Arsène On 08/04/2015 04:07 PM, Dan Kenigsberg wrote: On Tue, Aug 04, 2015 at 02:31:51PM +0100, Dan Kenigsberg wrote: On Mon, Aug 03, 2015 at 03:52:19PM +0200, Arsène Gschwind wrote: Hi, I'm running oVirt 3.5 and trying to setup vhostmd on EL7 but I'm no able to find the vdsm-hook-vhostmd for EL7, are there some reason this RPM isn't available? I don't know - it should have been created and placed under http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7/noarch/ this either a bug vdsm.spec, or in the way that vdsm was built for ovirt. Could you file a bug to have it fixed? Yaniv, Sandro, could you take a look? Yaniv has pointed me to the need to backport https://gerrit.ovirt.org/#/c/44350/ to the stable branch. I hope this gets in to ovirt-3.5.5. Until then, you can build the hook on your own system. Regards, Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Invitation: Hosted Engine - FC / Gluster support Deep Dive @ Mon Aug 31, 2015 4pm - 4:45pm (sbona...@redhat.com)
BEGIN:VCALENDAR PRODID:-//Google Inc//Google Calendar 70.9054//EN VERSION:2.0 CALSCALE:GREGORIAN METHOD:REQUEST BEGIN:VEVENT DTSTART:20150831T14Z DTEND:20150831T144500Z DTSTAMP:20150805T125254Z ORGANIZER;CN=sbona...@redhat.com:mailto:sbona...@redhat.com UID:8henkq06ju1ppm2qhus2637...@google.com ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=ACCEPTED;RSVP=TRUE ;CN=sbona...@redhat.com;X-NUM-GUESTS=0:mailto:sbona...@redhat.com ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP= TRUE;CN=de...@ovirt.org;X-NUM-GUESTS=0:mailto:de...@ovirt.org ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP= TRUE;CN=users@ovirt.org;X-NUM-GUESTS=0:mailto:users@ovirt.org CREATED:20150805T125227Z DESCRIPTION:Google event: https://plus.google.com/u/0/events/cjj32sv7hphujt nbu7st87827o8\n\nyoutube: https://www.youtube.com/watch?v=ZSe1dBHQfnA\nView your event at https://www.google.com/calendar/event?action=VIEWeid=OGhlbm txMDZqdTFwcG0ycWh1czI2MzdrZ3MgdXNlcnNAb3ZpcnQub3Jntok=MTkjc2JvbmF6em9AcmVk aGF0LmNvbTE0NjVlZjAwOTI0ZmRhMmNmMDI0Zjc2NjYxZTExM2YwZDUyZTllMTcctz=Europe/ Romehl=en. LAST-MODIFIED:20150805T125254Z LOCATION: SEQUENCE:0 STATUS:CONFIRMED SUMMARY:Hosted Engine - FC / Gluster support Deep Dive TRANSP:OPAQUE END:VEVENT END:VCALENDAR invite.ics Description: application/ics ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Prereqs for Self Hosted Engine Hyper Converged Gluster Support
On Wed, Aug 5, 2015 at 4:26 AM, Sandro Bonazzola sbona...@redhat.com wrote: On Mon, Aug 3, 2015 at 7:52 AM, Yedidyah Bar David d...@redhat.com wrote: On Mon, Aug 3, 2015 at 6:44 AM, Michael DePaulo mikedep...@gmail.com wrote: Hi, I am trying to follow these instructions on 3.6 alpha 3: http://www.ovirt.org/Features/Self_Hosted_Engine_Hyper_Converged_Gluster_Support The 1st time I ran ovirt-hosted-engine-setup (which was unsuccessful), What's exactly unsuccessful? Did it continue beyond the closeup stage? I saw the prompt: Do you want to configure this host for providing GlusterFS storage? (Yes, No)[No]: Now I no longer see it. Please check/post setup logs (of all relevant runs), from /var/log/ovirt-hosted-engine-setup Must gluster not have any peers or volumes already? Is there some other prereq that I am missing? Not sure, adding Sandro. If you're provisioning the gluster volume from within hosted-engine-setup it assumed that no gluster configuration was in place. If gluster is already configured and serving volumes it's assumed that the HE volumes has been allocated as well. Thank you for explaining this. I will send a separate email about my other issues when I try to use an existing HE Gluster volume. Note that the official support for HC was postponed to 4.0 [1], but some parts were already implemented and should work. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1175354 Best, -- Didi -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com -Mike ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt+gluster+NFS : storage hicups
Hi, I used the two links below to setup a test DC : http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ http://community.redhat.com/blog/2014/11/up-and-running-with-ovirt-3-5-part-two/ The only thing I did different is I did not usea hosted engine, but I dedicated a solid server for that. So I have one engine (CentOS 6.6), and 3 hosts (CentOS 7.0) As in the doc above, my 3 hosts are publishing 300 Go of replicated gluster storage, above which ctdb is managing a floating virtual ip that is used by NFS as the master storage domain. The last point is that the manager is also presenting a NFS storage I'm using as an export domain. It took me some time to plug all this setup as it is a bit more complicated as my other DC with a real SAN and no gluster, but it is eventually working (I can run VMs, migrate them...) I have made many severe tests (from a very dumb user point of view : unplug/replug the power cable of this server - does ctdb floats the vIP? does gluster self-heals?, does the VM restart?...) When precisely looking each layer one by one, all seems to be correct : ctdb is fast at managing the ip, NFS is OK, gluster seems to reconstruct, fencing eventually worked with the lanplus workaround, and so on... But from times to times, there seem to appear a severe hicup which I have great difficulties to diagnose. The messages in the web gui are not very precise, and not consistent: - some tell about some host having network issues, but I can ping it from every place it needs to be reached (especially from the SPM and the manager) On host serv-vm-al01, Error: Network error during communication with the Host - some tell that some volume is degraded, when it's not (gluster commands are showing no issue. Even the oVirt tab about the volumes are all green) - Host serv-vm-al03 cannot access the Storage Domain(s) UNKNOWN attached to the Data Center Just by waiting a couple of seconds lead to a self heal with no action. - Repeated Detected change in status of brick serv-vm-al03:/gluster/data/brick of volume data from DOWN to UP. but absolutely no action is made on this filesystem. At this time, zero VM is running in this test datacenter, and no action is made on the hosts. Though, I see some looping errors coming and going, and I find no way to diagnose. Amongst the *actions* that I had the idea to use to solve some issues : - I've found that trying to force the self-healing, and playing with gluster commands had no effect - I've found that playing with gluster adviced actions find /gluster -exec stat {} \; ... seem to have no either effect - I've found that forcing ctdb to move the vIp (ctdb stop, ctdb continue) DID SOLVE most of these issue. I believe that it's not what ctdb is doing that helps, but maybe one of its shell hook that is cleaning some troubles? As this setup is complexe, I don't ask anyone a silver bullet, but maybe you may know which layer is the most fragile, and which one I should look at more closely? -- Nicolas ECARNOT ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Cannot save network
Problem is resolved. I had edited a couple interfaces I wasn't using yet with static IPs but hadn't created/assigned any logical networks to them. Doing just that has made the error go away. Regards, Alan On 05/08/2015 8:18 PM, Alan Murrell wrote: Hello, I am running oVirt 3.5.1. I am running into an error when I try to save my network config: --- START ---Operation Canceled Error while executing action: ovirt-h01: Network address must be specified when using static ip --- END --- I have several logical networks defined, all of which are set with bootproto=none; the only logical network that has a static IP is ovirtmgmt I have searched the archives and Google and found same issue, but no resolution to my setup. Any ideas? Thanks! :-) Regards, Alan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users