[ovirt-users] Delete ISO from ISO storage
Hello everybody, I have a 3.5.0.1-1.el6 ovirt infrastructure installed and with many ISO uploaded in my ISO storage. Is there some way to delete unusable ISOs from my ISO storage?, Many thanks in advanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
I'm sorry for asnwer too late, the SPICE client version that I'm using is remote-viewer version 2.0.2.56 64 bits. Many thanks again, Juanjo. On Wed, Feb 25, 2015 at 9:31 AM, Christophe Fergeau cferg...@redhat.com wrote: Hey, On Wed, Feb 25, 2015 at 09:23:28AM +0100, Juan Jose wrote: Hello everybody, The Windows clients have installed Windows 7 Enterprise gets from Windows MSDNAA and it is installed in all machines here in our University. If you need some other information, please, feel free to ask me. I'm asking about remote-viewer (Windows SPICE client ;). Where did you get it from, and what version is it? Thanks, Christophe ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
Hello everybody, The Windows clients have installed Windows 7 Enterprise gets from Windows MSDNAA and it is installed in all machines here in our University. If you need some other information, please, feel free to ask me. Best regards, Juanjo. On Tue, Feb 24, 2015 at 6:27 PM, Christophe Fergeau cferg...@redhat.com wrote: Hey, On Tue, Feb 24, 2015 at 11:32:28AM -0500, Itamar Heim wrote: On 02/24/2015 10:41 AM, Juan Jose wrote: But I have a problem with Windows 7 clients. When I try to redirect a USB from my Windows 7 client to my Windows 7 VM the remote-viewer gives the error USB redirections support not compiled in. Any suggest or idea about what is my problem? Where did you get the Windows client from? What version is it? Christophe ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Problem with USB redirection
Hello everybody, I have installed a little infrestructure with ovirt 3.5.0.1 and I have some Windows 7 VMs created and working well. From linux client, when I go to user portal and open a VM (all these VM have defined in console USB support as Native) and I plug a USB pen drive, the VM takes it and I can use it from my Windows 7 VM. But I have a problem with Windows 7 clients. When I try to redirect a USB from my Windows 7 client to my Windows 7 VM the remote-viewer gives the error USB redirections support not compiled in. Any suggest or idea about what is my problem? Many thanks in advanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem adding new host
Thank you very much Yedidyah, I will create a new cluster. Best regards, Juanjo. On Thu, Feb 12, 2015 at 11:32 AM, Yedidyah Bar David d...@redhat.com wrote: - Original Message - From: Juan Jose jj197...@gmail.com To: users@ovirt.org Sent: Thursday, February 12, 2015 12:28:00 PM Subject: [ovirt-users] Problem adding new host Hello everybody, I have added a new host to my oVirt 3.5.0 and it has been added but when the installation finish the host remain in Not operational state. The error in the engine.log file is that CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER. The host is a little old. I'm attaching part of the lshw host information and the engine.log files. I know that this host is not able to virtualize 64 bits VMs which it is possible to do it by the other four hosts. I would like to confirm if the problem is what I'm saying. Seems so. You can create a new cluster with a lower cpu compatibility level and add it there. Best, -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] AAA documentation
Hello everybody, I used this gerrit page to install ovirt-engine-extension-aaa-ldap and it works fine to me because I had problems with AD emulated by Samba 4. With this extension I resolved it. Many thanks for the work, Juanjo. On Thu, Feb 12, 2015 at 12:50 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Winfried de Heiden w...@dds.nl To: Alon Bar-Lev alo...@redhat.com Cc: users@ovirt.org Sent: Thursday, February 12, 2015 1:47:21 PM Subject: Re: [ovirt-users] AAA documentation Hi, Thanks, I noticed the gerrit pages also, but well, if that's all, some progress has to be made... No installation/configuration guide for this? This is a read me that is also installed with the ovirt-engine-extension-aaa-ldap package into /usr/share/doc, the fact that it is text and not wiki style does not mean it does not have the required information... nor that it cannot be considered as a guide. Will you give it a chance and read it? I will be happy to help you with any specific issue. Winny Op 12-02-15 om 12:37 schreef Alon Bar-Lev: - Original Message - From: Winfried de Heiden w...@dds.nl To: users@ovirt.org Sent: Thursday, February 12, 2015 1:36:02 PM Subject: [ovirt-users] AAA documentation Hi all, The old LDAP for user authentication and information is outdated since oVirt 3.5; http://www.ovirt.org/LDAP_Quick_Start will tell ATTENTION: This page is obsoleted for =ovirt-engine-3.5 by Features/AAA The page http://www.ovirt.org/Features/AAA does not seem very helpfull in order to configure (LDAP in my case) this new feature. Were can I find more information? it does reference to here[1] [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD Kind regards, Winny ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem adding disk to VM
Hello everybody, As the bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=1188591 says, I haved tested to add an empty disk profile and it works fine, you can create VM and its Virtual disk. Many thanks, Juanjo. On Thu, Feb 5, 2015 at 9:33 AM, Juan Jose jj197...@gmail.com wrote: I don't have any disk profile but I can create some one and try this possibility. I will do it and I will come back with the result. Many thanks, Juanjo. On Tue, Feb 3, 2015 at 1:01 PM, Tomas Jelinek tjeli...@redhat.com wrote: - Original Message - From: Juan Jose jj197...@gmail.com To: Tomas Jelinek tjeli...@redhat.com Cc: Karli Sjöberg karli.sjob...@slu.se, users@ovirt.org Sent: Tuesday, February 3, 2015 12:28:36 PM Subject: Re: [ovirt-users] Problem adding disk to VM Done, I have updated the bug in Bugzilla. I don't know how can I attach a screenshot. I attach here in case that someone wants to added it. OK, attached the screenshot. BTW looking at it I have a suspicion the problem may be with the empty disk profile? If you select some, does it work? Many thanks in advanced, Juanjo. On Tue, Feb 3, 2015 at 11:42 AM, Tomas Jelinek tjeli...@redhat.com wrote: - Original Message - From: Juan Jose jj197...@gmail.com To: Tomas Jelinek tjeli...@redhat.com Cc: Karli Sjöberg karli.sjob...@slu.se, users@ovirt.org Sent: Tuesday, February 3, 2015 11:29:15 AM Subject: Re: [ovirt-users] Problem adding disk to VM Hello Tomas and Karli, Yes it seems that it is a Javascript exception. After click OK in Add disk option I face this error in web console: yeah, it is obviously a null pointer exception in frontend. I have just opened a bug: https://bugzilla.redhat.com/show_bug.cgi?id=1188591 Please go to that bug and try to include also some additional details of your configuration (e.g. storage type etc) and if possible please also provide a screenshot of the add disk dialog. Until it gets fixed, you can add disks using the REST API or using cmd line tools Tue Feb 03 11:25:04 GMT+100 2015 com.google.gwt.logging.client.LogConfiguration SEVERE: Exception caught: (TypeError) : d4(...) is null com.google.gwt.event.shared.UmbrellaException: Exception caught: (TypeError) : d4(...) is null at Unknown.$p(Unknown Source) at Unknown.fq(Unknown Source) at Unknown.NY(Unknown Source) at Unknown.QY(Unknown Source) at Unknown._X(Unknown Source) at Unknown.Rae(Unknown Source) at Unknown._ae(Unknown Source) at Unknown.PT(Unknown Source) at Unknown.Tae(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/bne(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.rv(Unknown Source) at Unknown.ewe(Unknown Source) at Unknown.fLj(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/_me(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.anonymous(Unknown Source) Caused by: com.google.gwt.core.client.JavaScriptException: (TypeError) : d4(...) is null at Unknown.t9n(Unknown Source) at Unknown.Gko(Unknown Source) at Unknown.cao(Unknown Source) at Unknown.xKj(Unknown Source) at Unknown.c6i(Unknown Source) at Unknown.iU(Unknown Source) at Unknown.jY(Unknown Source) at Unknown._X(Unknown Source) at Unknown.Rae(Unknown Source) at Unknown._ae(Unknown Source) at Unknown.PT(Unknown Source) at Unknown.Tae(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/bne(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.rv(Unknown Source) at Unknown.ewe(Unknown Source) at Unknown.fLj(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/_me(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.anonymous(Unknown Source) What could be the next step?, Many thanks in advanced, Juanjo. On Tue, Feb 3, 2015 at 11:09 AM, Tomas Jelinek tjeli...@redhat.com wrote: - Original Message - From: Karli Sjöberg karli.sjob...@slu.se To: Juan Jose jj197...@gmail.com
Re: [ovirt-users] Problem adding disk to VM
I don't have any disk profile but I can create some one and try this possibility. I will do it and I will come back with the result. Many thanks, Juanjo. On Tue, Feb 3, 2015 at 1:01 PM, Tomas Jelinek tjeli...@redhat.com wrote: - Original Message - From: Juan Jose jj197...@gmail.com To: Tomas Jelinek tjeli...@redhat.com Cc: Karli Sjöberg karli.sjob...@slu.se, users@ovirt.org Sent: Tuesday, February 3, 2015 12:28:36 PM Subject: Re: [ovirt-users] Problem adding disk to VM Done, I have updated the bug in Bugzilla. I don't know how can I attach a screenshot. I attach here in case that someone wants to added it. OK, attached the screenshot. BTW looking at it I have a suspicion the problem may be with the empty disk profile? If you select some, does it work? Many thanks in advanced, Juanjo. On Tue, Feb 3, 2015 at 11:42 AM, Tomas Jelinek tjeli...@redhat.com wrote: - Original Message - From: Juan Jose jj197...@gmail.com To: Tomas Jelinek tjeli...@redhat.com Cc: Karli Sjöberg karli.sjob...@slu.se, users@ovirt.org Sent: Tuesday, February 3, 2015 11:29:15 AM Subject: Re: [ovirt-users] Problem adding disk to VM Hello Tomas and Karli, Yes it seems that it is a Javascript exception. After click OK in Add disk option I face this error in web console: yeah, it is obviously a null pointer exception in frontend. I have just opened a bug: https://bugzilla.redhat.com/show_bug.cgi?id=1188591 Please go to that bug and try to include also some additional details of your configuration (e.g. storage type etc) and if possible please also provide a screenshot of the add disk dialog. Until it gets fixed, you can add disks using the REST API or using cmd line tools Tue Feb 03 11:25:04 GMT+100 2015 com.google.gwt.logging.client.LogConfiguration SEVERE: Exception caught: (TypeError) : d4(...) is null com.google.gwt.event.shared.UmbrellaException: Exception caught: (TypeError) : d4(...) is null at Unknown.$p(Unknown Source) at Unknown.fq(Unknown Source) at Unknown.NY(Unknown Source) at Unknown.QY(Unknown Source) at Unknown._X(Unknown Source) at Unknown.Rae(Unknown Source) at Unknown._ae(Unknown Source) at Unknown.PT(Unknown Source) at Unknown.Tae(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/bne(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.rv(Unknown Source) at Unknown.ewe(Unknown Source) at Unknown.fLj(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/_me(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.anonymous(Unknown Source) Caused by: com.google.gwt.core.client.JavaScriptException: (TypeError) : d4(...) is null at Unknown.t9n(Unknown Source) at Unknown.Gko(Unknown Source) at Unknown.cao(Unknown Source) at Unknown.xKj(Unknown Source) at Unknown.c6i(Unknown Source) at Unknown.iU(Unknown Source) at Unknown.jY(Unknown Source) at Unknown._X(Unknown Source) at Unknown.Rae(Unknown Source) at Unknown._ae(Unknown Source) at Unknown.PT(Unknown Source) at Unknown.Tae(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/bne(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.rv(Unknown Source) at Unknown.ewe(Unknown Source) at Unknown.fLj(Unknown Source) at Unknown.Awe(Unknown Source) at Unknown.mbe(Unknown Source) at Unknown.Ele(Unknown Source) at Unknown.hne/_me(Unknown Source) at Unknown.Jr(Unknown Source) at Unknown.Mr(Unknown Source) at Unknown.Lr/(Unknown Source) at Unknown.anonymous(Unknown Source) What could be the next step?, Many thanks in advanced, Juanjo. On Tue, Feb 3, 2015 at 11:09 AM, Tomas Jelinek tjeli...@redhat.com wrote: - Original Message - From: Karli Sjöberg karli.sjob...@slu.se To: Juan Jose jj197...@gmail.com Cc: users@ovirt.org Sent: Tuesday, February 3, 2015 10:43:09 AM Subject: Re: [ovirt-users] Problem adding disk to VM On Tue, 2015-02-03 at 10:40 +0100, Juan Jose wrote: Hello everybody, Here I attach an Add disk option screenshot to show
Re: [ovirt-users] Problem adding disk to VM
Hello everybody, Here I attach an Add disk option screenshot to show that the disk is not added when I clieck OK button, nothing happen, the virtual disk is not added and no error is showed. Any suggestion, Juanjo On Mon, Feb 2, 2015 at 4:59 PM, Juan Jose jj197...@gmail.com wrote: Hello everybody, I have oVirt Engine Version: 3.5.0.1-1.el6 in my installation and when I create a new VM and try to add a virtual disk, the engine does not add the virtual disk when I press OK button. Any message is generated in engine.log file. Is it a bug or any can give me some light about this issue? Many thanks in advanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Problem adding disk to VM
Hello everybody, I have oVirt Engine Version: 3.5.0.1-1.el6 in my installation and when I create a new VM and try to add a virtual disk, the engine does not add the virtual disk when I press OK button. Any message is generated in engine.log file. Is it a bug or any can give me some light about this issue? Many thanks in advanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem after update ovirt to 3.5
Many thanks Simone,
Juanjo.
On Tue, Dec 16, 2014 at 1:48 PM, Simone Tiraboschi stira...@redhat.com
wrote:
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Yedidyah Bar David d...@redhat.com, sbona...@redhat.com
Cc: users@ovirt.org
Sent: Tuesday, December 16, 2014 1:03:17 PM
Subject: Re: [ovirt-users] Problem after update ovirt to 3.5
Hello everybody,
It was the firewall, after upgrade my engine the NFS configuration had
disappered, I have configured again as Red Hat says and now it works
properly again.
Many thank again for the indications.
We already had a patch for it [1],
it will released next month with oVirt 3.5.1
[1] http://gerrit.ovirt.org/#/c/32874/
Juanjo.
On Mon, Dec 15, 2014 at 2:32 PM, Yedidyah Bar David d...@redhat.com
wrote:
- Original Message -
From: Juan Jose jj197...@gmail.com
To: users@ovirt.org
Sent: Monday, December 15, 2014 3:17:15 PM
Subject: [ovirt-users] Problem after update ovirt to 3.5
Hello everybody,
After upgrade my engine to oVirt 3.5, I have also upgraded one of my
hosts
to
oVirt 3.5. After that it seems that all have gone good aparently.
But in some seconds my ISO domain is desconnected and it is impossible
to
Activate. I'm attaching my engine.log. The below error is showed each
time
I
try to Activate the ISO domain. Before the upgrade it was working
without
problems:
2014-12-15 13:25:07,607 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null,
Call
Stack: null, Custom Event ID: -1, Message: Failed to connect Host
host1 to
the Storage Domains ISO_DOMAIN.
2014-12-15 13:25:07,608 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand]
(org.ovirt.thread.pool-8-thread-5) [460733dd] FINISH,
ConnectStorageServerVDSCommand, return:
{81c0a853-715c-4478-a812-6a74808fc482=477}, log id: 3590969e
2014-12-15 13:25:07,615 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null,
Call
Stack: null, Custom Event ID: -1, Message: The error message for
connection
ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 returned by
VDSM
was: Problem while trying to mount target
2014-12-15 13:25:07,616 ERROR
[org.ovirt.engine.core.bll.storage.NFSStorageHelper]
(org.ovirt.thread.pool-8-thread-5) [460733dd] The connection with
details
ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 failed
because
of error code 477 and error message is: problem while trying to mount
target
If any other information is required, please tell me.
Is the ISO domain on the engine host?
Please check there iptables and /etc/exports, /etc/exports.d.
Please post the setup (upgrade) log, check /var/log/ovirt-engine/setup.
Thanks,
--
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem after update ovirt to 3.5
Hello everybody,
It was the firewall, after upgrade my engine the NFS configuration had
disappered, I have configured again as Red Hat says and now it works
properly again.
Many thank again for the indications.
Juanjo.
On Mon, Dec 15, 2014 at 2:32 PM, Yedidyah Bar David d...@redhat.com wrote:
- Original Message -
From: Juan Jose jj197...@gmail.com
To: users@ovirt.org
Sent: Monday, December 15, 2014 3:17:15 PM
Subject: [ovirt-users] Problem after update ovirt to 3.5
Hello everybody,
After upgrade my engine to oVirt 3.5, I have also upgraded one of my
hosts to
oVirt 3.5. After that it seems that all have gone good aparently.
But in some seconds my ISO domain is desconnected and it is impossible to
Activate. I'm attaching my engine.log. The below error is showed each
time I
try to Activate the ISO domain. Before the upgrade it was working without
problems:
2014-12-15 13:25:07,607 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call
Stack: null, Custom Event ID: -1, Message: Failed to connect Host host1
to
the Storage Domains ISO_DOMAIN.
2014-12-15 13:25:07,608 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand]
(org.ovirt.thread.pool-8-thread-5) [460733dd] FINISH,
ConnectStorageServerVDSCommand, return:
{81c0a853-715c-4478-a812-6a74808fc482=477}, log id: 3590969e
2014-12-15 13:25:07,615 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call
Stack: null, Custom Event ID: -1, Message: The error message for
connection
ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 returned by
VDSM
was: Problem while trying to mount target
2014-12-15 13:25:07,616 ERROR
[org.ovirt.engine.core.bll.storage.NFSStorageHelper]
(org.ovirt.thread.pool-8-thread-5) [460733dd] The connection with details
ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 failed
because
of error code 477 and error message is: problem while trying to mount
target
If any other information is required, please tell me.
Is the ISO domain on the engine host?
Please check there iptables and /etc/exports, /etc/exports.d.
Please post the setup (upgrade) log, check /var/log/ovirt-engine/setup.
Thanks,
--
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem after update ovirt to 3.5 (Juan Jose)
Hello Nikolai,
Many thanks, my problem was the engine firewall, after upgrade the firewall
configuration dissappered. As I have ISO domain in my engine server, hosts
were not able to mount this ISO domain NFS resource because of the engine
firewall. I have configured again and now all is working properly.
Many thanks again for your help,
Juanjo.
On Tue, Dec 16, 2014 at 1:09 PM, Nikolai Sednev nsed...@redhat.com wrote:
Hi Juan,
Please try to maintain the upgraded host and reboot manually when
components upgrade finished, after host comes back up, activate it, this
should resolve NFS mount issue.
Thanks in advance.
Best regards,
Nikolai
Nikolai Sednev
Senior Quality Engineer at Compute team
Red Hat Israel
34 Jerusalem Road,
Ra'anana, Israel 43501
Tel: +972 9 7692043
Mobile: +972 52 7342734
Email: nsed...@redhat.com
IRC: nsednev
--
*From: *Nikolai Sednev nsed...@redhat.com
*To: *users@ovirt.org
*Sent: *Monday, December 15, 2014 3:30:14 PM
*Subject: *Problem after update ovirt to 3.5 (Juan Jose)
Hi Juan,
Looks like a bug connected to NFS mount, can you supply VDSM and libvirt
logs?
Was NFS share active and up after upgrade?
Was all of your hosts at the same host cluster at the same VDSM version at
3.5 after engine was upgraded to 3.5?
Thanks in advance.
Best regards,
Nikolai
Nikolai Sednev
Senior Quality Engineer at Compute team
Red Hat Israel
34 Jerusalem Road,
Ra'anana, Israel 43501
Tel: +972 9 7692043
Mobile: +972 52 7342734
Email: nsed...@redhat.com
IRC: nsednev
--
*From: *users-requ...@ovirt.org
*To: *users@ovirt.org
*Sent: *Monday, December 15, 2014 3:21:58 PM
*Subject: *Users Digest, Vol 39, Issue 82
Send Users mailing list submissions to
users@ovirt.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ovirt.org/mailman/listinfo/users
or, via email, send a message with subject or body 'help' to
users-requ...@ovirt.org
You can reach the person managing the list at
users-ow...@ovirt.org
When replying, please edit your Subject line so it is more specific
than Re: Contents of Users digest...
Today's Topics:
1. Problem after update ovirt to 3.5 (Juan Jose)
--
Message: 1
Date: Mon, 15 Dec 2014 14:17:15 +0100
From: Juan Jose jj197...@gmail.com
To: users@ovirt.org users@ovirt.org
Subject: [ovirt-users] Problem after update ovirt to 3.5
Message-ID:
cadre9wbepeg3xu8b0ans8jutouivj8mc5bsdbd6q16ukfw4...@mail.gmail.com
Content-Type: text/plain; charset=utf-8
Hello everybody,
After upgrade my engine to oVirt 3.5, I have also upgraded one of my hosts
to oVirt 3.5. After that it seems that all have gone good aparently.
But in some seconds my ISO domain is desconnected and it is impossible to
Activate. I'm attaching my engine.log. The below error is showed each time
I try to Activate the ISO domain. Before the upgrade it was working without
problems:
2014-12-15 13:25:07,607 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call
Stack: null, Custom Event ID: -1, Message: Failed to connect Host host1 to
the Storage Domains ISO_DOMAIN.
2014-12-15 13:25:07,608 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand]
(org.ovirt.thread.pool-8-thread-5) [460733dd] FINISH,
ConnectStorageServerVDSCommand, return:
{81c0a853-715c-4478-a812-6a74808fc482=477}, log id: 3590969e
2014-12-15 13:25:07,615 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-5) [460733dd] Correlation ID: null, Call
Stack: null, Custom Event ID: -1, Message: The error message for connection
ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 returned by
VDSM was: Problem while trying to mount target
2014-12-15 13:25:07,616 ERROR
[org.ovirt.engine.core.bll.storage.NFSStorageHelper]
(org.ovirt.thread.pool-8-thread-5) [460733dd] The connection with details
ovirt-engine.siee.local:/var/lib/exports/iso-20140303082312 failed because
of error code 477 and error message is: problem while trying to mount
target
If any other information is required, please tell me.
Many thanks in advanced,
Juanjo.
-- next part --
An HTML attachment was scrubbed...
URL:
http://lists.ovirt.org/pipermail/users/attachments/20141215/c90d6bc1/attachment.html
-- next part --
A non-text attachment was scrubbed...
Name: engine.log
Type: text/x-log
Size: 2594755 bytes
Desc: not available
URL:
http://lists.ovirt.org/pipermail/users/attachments/20141215/c90d6bc1/attachment.bin
--
___
Users mailing
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon,
I have done what you have said. My new configuration files are:
/etc/ovirt-engine/extensions.d/siee-local-authn.properties:
ovirt.engine.extension.name = siee-local-authn
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module =
org.ovirt.engine-extensions.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class =
org.ovirt.engineextensions.aaa.ldap.AuthnExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn
ovirt.engine.aaa.authn.profile.name = siee
ovirt.engine.aaa.authn.authz.plugin = siee-local-authz
config.profile.file.1 = aaa/siee.properties
/etc/ovirt-engine/extensions.d/siee-local-authz.properties:
ovirt.engine.extension.name = siee-local-authz
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module =
org.ovirt.engine-extensions.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class =
org.ovirt.engineextensions.aaa.ldap.AuthzExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz
config.profile.file.1 = aaa/siee.properties
/etc/ovirt-engine/extensions.d/aaa/siee.properties:
include = ad.properties
#
# Active directory domain name.
#
vars.domain = siee.local
#
# Search user and its password.
#
vars.user = searcher@${global:vars.domain}
vars.password = xxx
#
# Optional DNS servers, if enterprise
# DNS server cannot resolve the domain srvrecord.
#
#vars.dns = dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain}
pool.default.serverset.type = srvrecord
pool.default.serverset.srvrecord.domain = ${global:vars.domain}
pool.default.auth.simple.bindDN = ${global:vars.user}
pool.default.auth.simple.password = ${global:vars.password}
# Uncomment if using custom DNS
#pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url
= ${global:vars.dns}
#pool.default.socketfactory.resolver.uRL = ${global:vars.dns}
# Create keystore, import certificate chain and uncomment
# if using ssl/tls.
#pool.default.ssl.startTLS = true
#pool.default.ssl.truststore.file =
${local:_basedir}/${global:vars.domain}.jks
#pool.default.ssl.truststore.password = changeit
After reconfigure my files with ovirt-engine stopped I have started
ovirt-engine and I have tried to log in. The error persist,
General command validation failure. and after that I have stopped
ovirt-engine again. I attach my engine.log file.
Many thanks again,
Juanjo.
On Tue, Dec 2, 2014 at 3:46 PM, Alon Bar-Lev alo...@redhat.com wrote:
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Alon Bar-Lev alo...@redhat.com
Cc: Ondra Machacek omach...@redhat.com, Yair Zaslavsky
yzasl...@redhat.com, users@ovirt.org
Sent: Tuesday, December 2, 2014 3:48:54 PM
Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon and everybody,
I have installed package ovirt-engine-extension-aaa-ldap and configure my
files as the documentation says. The files are:
/etc/ovirt-engine/extensions.d/siee.local-authn.properties:
ovirt.engine.extension.name = siee.local-authn
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module =
org.ovirt.engine-extensions.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class =
org.ovirt.engineextensions.aaa.ldap.AuthnExtension
ovirt.engine.extension.provides =
org.ovirt.engine.api.extensions.aaa.Authn
ovirt.engine.aaa.authn.profile.name = siee.local
ovirt.engine.aaa.authn.authz.plugin = siee.local-authz
config.profile.file.1 = aaa/siee.local.properties
please use absolute file name for 3.5.0 relative will be available in 3.5.1
/etc/ovirt-engine/extensions.d/siee.local-authz.properties:
ovirt.engine.extension.name = siee.local-authz
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module =
org.ovirt.engine-extensions.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class =
org.ovirt.engineextensions.aaa.ldap.AuthzExtension
ovirt.engine.extension.provides =
org.ovirt.engine.api.extensions.aaa.Authz
config.profile.file.1 = aaa/siee.local.properties
please use absolute file name for 3.5.0 relative will be available in 3.5.1
/etc/ovirt-engine/extensions.d/aaa/siee.local.properties:
include = ad.properties
#
# Active directory domain name.
#
vars.domain = siee.local
#
# Search user and its password.
#
vars.user = juanjo@${global:vars.domain}
vars.password =
this should be dedicate user for search not your private user.
#
# Optional DNS servers, if enterprise
# DNS server cannot resolve the domain srvrecord.
#
#vars.dns = dns://dc1.${global:vars.domain}
dns://dc2.${global:vars.domain}
pool.default.serverset.type = srvrecord
pool.default.serverset.srvrecord.domain = ${global:vars.domain}
pool.default.auth.simple.bindDN = ${global:vars.user}
pool.default.auth.simple.password
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon, I have deleted Legacy domain with engine-manage-domain, and I have changed configuration to absolute file name as you can see: /etc/ovirt-engine/extensions.d/siee-local-authn.properties: ovirt.engine.extension.name = siee-local-authn ovirt.engine.extension.bindings.method = jbossmodule ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine-extensions.aaa.ldap ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engineextensions.aaa.ldap.AuthnExtension ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn ovirt.engine.aaa.authn.profile.name = siee ovirt.engine.aaa.authn.authz.plugin = siee-local-authz config.profile.file.1 = /etc/ovirt-engine/extensions.d/aaa/siee.properties /etc/ovirt-engine/extensions.d/siee-local-authz.properties: ovirt.engine.extension.name = siee-local-authz ovirt.engine.extension.bindings.method = jbossmodule ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine-extensions.aaa.ldap ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engineextensions.aaa.ldap.AuthzExtension ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz config.profile.file.1 = /etc/ovirt-engine/extensions.d/aaa/siee.properties I had configured relative file name because the example /usr/share/ovirt-engine-extension-aaa-ldap/examples/ad/extensions.d/domain1-authz.properties has a relative file name. I have done the same: delete engine.log, restart ovirt-engine and try log in and the same error is showed, General command validation failure. Attach engine.log file. Thanks, Juanjo. On Fri, Dec 5, 2014 at 9:52 AM, Alon Bar-Lev alo...@redhat.com wrote: Hi! You have the following errors: 2014-12-05 09:32:31,778 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-5) Loading extension 'siee-local-authn' 2014-12-05 09:32:31,819 ERROR [org.ovirt.engine.core.utils.extensionsmgr.EngineExtensionsManager] (MSC service thread 1-5) Could not load extension based on configuration file '/etc/ovirt-engine/extensions.d/siee-local-authn.properties'. Please check the configuration file is valid. Exception message is: Error loading extension 'siee-local-authn': /aaa/siee.properties (No such file or directory) 2014-12-05 09:32:31,823 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-5) Loading extension 'siee-local-authz' 2014-12-05 09:32:31,824 ERROR [org.ovirt.engine.core.utils.extensionsmgr.EngineExtensionsManager] (MSC service thread 1-5) Could not load extension based on configuration file '/etc/ovirt-engine/extensions.d/siee-local-authz.properties'. Please check the configuration file is valid. Exception message is: Error loading extension 'siee-local-authz': /aaa/siee.properties (No such file or directory) Per my last message, you should provide absolute file names if you use 3.5.0. Please see inline comments bellow. Also, you are trying to authenticate with the legacy provider: 2014-12-05 09:33:04,871 ERROR [org.ovirt.engine.extensions.aaa.builtin.kerberosldap.DirectorySearcher] (ajp--127.0.0.1-8702-5) Failed ldap search server ldap://adserver.siee.local:389 using user juanjo@SIEE.LOCAL due to Authentication Failed. Please verify the username and password.. We should not try the next server Can you please use engine-manage-domains to remove the legacy (old) domain, so we reduce confusion? Thanks! - Original Message - From: Juan Jose jj197...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: Ondra Machacek omach...@redhat.com, Yair Zaslavsky yzasl...@redhat.com, users@ovirt.org Sent: Friday, December 5, 2014 10:43:01 AM Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue Hello Alon, I have done what you have said. My new configuration files are: /etc/ovirt-engine/extensions.d/siee-local-authn.properties: ovirt.engine.extension.name = siee-local-authn ovirt.engine.extension.bindings.method = jbossmodule ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine-extensions.aaa.ldap ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engineextensions.aaa.ldap.AuthnExtension ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn ovirt.engine.aaa.authn.profile.name = siee ovirt.engine.aaa.authn.authz.plugin = siee-local-authz config.profile.file.1 = aaa/siee.properties should be: /etc/ovirt-engine/extensions.d/aaa/siee.properties in 3.5.0 or can be ../aaa/siee.properties in 3.5.1. /etc/ovirt-engine/extensions.d/siee-local-authz.properties: ovirt.engine.extension.name = siee-local-authz ovirt.engine.extension.bindings.method = jbossmodule ovirt.engine.extension.binding.jbossmodule.module = org.ovirt.engine-extensions.aaa.ldap ovirt.engine.extension.binding.jbossmodule.class = org.ovirt.engineextensions.aaa.ldap.AuthzExtension ovirt.engine.extension.provides
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon and everybody,
I have installed package ovirt-engine-extension-aaa-ldap and configure my
files as the documentation says. The files are:
/etc/ovirt-engine/extensions.d/siee.local-authn.properties:
ovirt.engine.extension.name = siee.local-authn
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module =
org.ovirt.engine-extensions.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class =
org.ovirt.engineextensions.aaa.ldap.AuthnExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn
ovirt.engine.aaa.authn.profile.name = siee.local
ovirt.engine.aaa.authn.authz.plugin = siee.local-authz
config.profile.file.1 = aaa/siee.local.properties
/etc/ovirt-engine/extensions.d/siee.local-authz.properties:
ovirt.engine.extension.name = siee.local-authz
ovirt.engine.extension.bindings.method = jbossmodule
ovirt.engine.extension.binding.jbossmodule.module =
org.ovirt.engine-extensions.aaa.ldap
ovirt.engine.extension.binding.jbossmodule.class =
org.ovirt.engineextensions.aaa.ldap.AuthzExtension
ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz
config.profile.file.1 = aaa/siee.local.properties
/etc/ovirt-engine/extensions.d/aaa/siee.local.properties:
include = ad.properties
#
# Active directory domain name.
#
vars.domain = siee.local
#
# Search user and its password.
#
vars.user = juanjo@${global:vars.domain}
vars.password =
#
# Optional DNS servers, if enterprise
# DNS server cannot resolve the domain srvrecord.
#
#vars.dns = dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain}
pool.default.serverset.type = srvrecord
pool.default.serverset.srvrecord.domain = ${global:vars.domain}
pool.default.auth.simple.bindDN = ${global:vars.user}
pool.default.auth.simple.password = ${global:vars.password}
# Uncomment if using custom DNS
#pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url
= ${global:vars.dns}
#pool.default.socketfactory.resolver.uRL = ${global:vars.dns}
# Create keystore, import certificate chain and uncomment
# if using ssl/tls.
#pool.default.ssl.startTLS = true
#pool.default.ssl.truststore.file =
${local:_basedir}/${global:vars.domain}.jks
#pool.default.ssl.truststore.password = changeit
And after this configuration I restart ovirt-engine service. When I try to
login in administrator portal I can see the error The user name or
password is incorrect.. In /var/log/ovirt-engine/engine.log I have the
errors:
2014-12-02 14:02:21,983 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-8) Correlation ID: null, Call Stack: null, Custom
Event ID: -1, Message: User juanjo cannot login, please verify the username
and password.
2014-12-02 14:02:21,991 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-8) Correlation ID: null, Call Stack: null, Custom
Event ID: -1, Message: User juanjo failed to log in.
I'm using correct user and password becuase I can login in a Windows client
machine which is inside siee.local domain with this user and its correct
password.
What do you think it could be the problem?
If you need more information or I have to configure any other parameters,
please tell me.
Many thanks in advanced,
Juanjo.
On Wed, Nov 26, 2014 at 3:19 PM, Alon Bar-Lev alo...@redhat.com wrote:
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Alon Bar-Lev alo...@redhat.com
Cc: Ondra Machacek omach...@redhat.com, Yair Zaslavsky
yzasl...@redhat.com, users@ovirt.org
Sent: Wednesday, November 26, 2014 3:04:14 PM
Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon and everybody,
Check in my ovirt-engine machine for ovirt-engine-aaa-ldap package and it
is not available:
yum list ovirt-engine*
Loaded plugins: fastestmirror, refresh-packagekit, security, versionlock
Loading mirror speeds from cached hostfile
* base: ftp.udl.es
* epel: mirror.uv.es
* extras: ftp.udl.es
* ovirt-3.5: ftp.nluug.nl
* ovirt-3.5-epel: mirror.uv.es
* ovirt-3.5-jpackage-6.0-generic: mirror.ibcp.fr
* ovirt-epel: mirror.uv.es
* ovirt-jpackage-6.0-generic: mirror.ibcp.fr
* updates: ftp.udl.es
Installed Packages
ovirt-engine.noarch
3.5.0.1-1.el6 @ovirt-3.5
ovirt-engine-backend.noarch
3.5.0.1-1.el6 @ovirt-3.5
ovirt-engine-cli.noarch
3.3.0.6-1.el6 @ovirt-3.3.3
ovirt-engine-dbscripts.noarch
3.5.0.1-1.el6 @ovirt-3.5
ovirt-engine-extensions-api-impl.noarch
3.5.0.1-1.el6 @ovirt-3.5
ovirt-engine-jboss-as.x86_64
7.1.1-1.el6 @ovirt-3.5
ovirt-engine-lib.noarch
3.5.0.1-1.el6 @ovirt-3.5
ovirt-engine-restapi.noarch
3.5.0.1-1.el6 @ovirt-3.5
ovirt-engine-sdk-python.noarch
3.5.0.8-1.el6
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello everybody, I will try this package shortly, but I would like to know why I can't use my AD as I was doing in ovirt 3.4 before upgrade to ovirt 3.5. I have executed kinit without problems after some modification in my /etc/krb5.conf file, as I said in before mail but the error with portal persists. Any suggestion? Many thanks in advanced, Juanjo. On Wed, Nov 26, 2014 at 3:19 PM, Alon Bar-Lev alo...@redhat.com wrote: - Original Message - From: Juan Jose jj197...@gmail.com To: Alon Bar-Lev alo...@redhat.com Cc: Ondra Machacek omach...@redhat.com, Yair Zaslavsky yzasl...@redhat.com, users@ovirt.org Sent: Wednesday, November 26, 2014 3:04:14 PM Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue Hello Alon and everybody, Check in my ovirt-engine machine for ovirt-engine-aaa-ldap package and it is not available: yum list ovirt-engine* Loaded plugins: fastestmirror, refresh-packagekit, security, versionlock Loading mirror speeds from cached hostfile * base: ftp.udl.es * epel: mirror.uv.es * extras: ftp.udl.es * ovirt-3.5: ftp.nluug.nl * ovirt-3.5-epel: mirror.uv.es * ovirt-3.5-jpackage-6.0-generic: mirror.ibcp.fr * ovirt-epel: mirror.uv.es * ovirt-jpackage-6.0-generic: mirror.ibcp.fr * updates: ftp.udl.es Installed Packages ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-backend.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-cli.noarch 3.3.0.6-1.el6 @ovirt-3.3.3 ovirt-engine-dbscripts.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-extensions-api-impl.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-jboss-as.x86_64 7.1.1-1.el6 @ovirt-3.5 ovirt-engine-lib.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-restapi.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-sdk-python.noarch 3.5.0.8-1.el6 @ovirt-3.5 ovirt-engine-setup.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-base.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine-common.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-tools.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-userportal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-webadmin-portal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 Available Packages ovirt-engine-cli.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-dwh.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-dwh-setup.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-extensions-api-impl-javadoc.noarch 3.5.0.1-1.el6 ovirt-3.5 ovirt-engine-reports.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-reports-setup.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-sdk-java.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-sdk-java-javadoc.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-setup-plugin-allinone.noarch How can I get this package? Thanks for trying! Package is available at ovirt-3.5-snapshot[1]. [1] http://resources.ovirt.org/pub/ovirt-3.5-snapshot/ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon, I have tried to find this package: yum list ovirt-engine-extension-aaa-ldap or yum list ovirt-engine-extension-* and always I receive: Error: No matching Packages to list Is it possible that I need some special repository? Many thanks again, Juanjo. On Tue, Nov 25, 2014 at 6:32 PM, Alon Bar-Lev alo...@redhat.com wrote: Hello Juan, Do you want to give a chance to the new provider? In this provider I can help? Package is ovirt-engine-extension-aaa-ldap. Documentation is available here[1]. The chances to make it work are higher, and this is the future of LDAP support. Alon [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] USB redirect
Thank you very much Uri and everybody, Best regards, Juanjo. On Wed, Nov 26, 2014 at 1:01 PM, Uri Lublin u...@redhat.com wrote: On 11/23/2014 10:42 AM, Lev Veyde wrote: Hi Michal, As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO. Hi, Lev, you are correct; there is nothing to install on the guest for Spice Native USB. On the client side there is a need for remote-viewer to be configured with USB redir enabled, and having access to the device (via libusb). On a Windows client currently we use WinUSB driver to enable access to the USB device. The driver can be installed using the usbclerk service or manually (e.g. with Zadig). It must be installed for each device to be redirected. On Ovirt, as mentioned, Native Spice USB option has to be enabled. (This would also add the virtual usb devices needed on the qemu-kvm/spice-server side). Hope that helps, Uri. The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client. I forwarded the issue to the Spice team, they could properly point to the issue. Thanks in advance, Lev Veyde. - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, November 21, 2014 3:07:09 PM Subject: Re: [ovirt-users] USB redirect On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote: Hello Michal and everybody, I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. Is it possible that this usbredir driver is not in this ISO? adding Lev who builds the ISO…can you please check? Thanks, michal Many thanks in advanced, Juanjo. On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Michal, I will try it and I will try to upgrade my oVirt 3.4. Thanks again and best regards, Juanjo. On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote: Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Hi, it's a regular part of the 3.5 release... http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ enjoy!:) Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello Alon and everybody, Check in my ovirt-engine machine for ovirt-engine-aaa-ldap package and it is not available: yum list ovirt-engine* Loaded plugins: fastestmirror, refresh-packagekit, security, versionlock Loading mirror speeds from cached hostfile * base: ftp.udl.es * epel: mirror.uv.es * extras: ftp.udl.es * ovirt-3.5: ftp.nluug.nl * ovirt-3.5-epel: mirror.uv.es * ovirt-3.5-jpackage-6.0-generic: mirror.ibcp.fr * ovirt-epel: mirror.uv.es * ovirt-jpackage-6.0-generic: mirror.ibcp.fr * updates: ftp.udl.es Installed Packages ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-backend.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-cli.noarch 3.3.0.6-1.el6 @ovirt-3.3.3 ovirt-engine-dbscripts.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-extensions-api-impl.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-jboss-as.x86_64 7.1.1-1.el6 @ovirt-3.5 ovirt-engine-lib.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-restapi.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-sdk-python.noarch 3.5.0.8-1.el6 @ovirt-3.5 ovirt-engine-setup.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-base.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-ovirt-engine-common.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-setup-plugin-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-tools.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-userportal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-webadmin-portal.noarch 3.5.0.1-1.el6 @ovirt-3.5 ovirt-engine-websocket-proxy.noarch 3.5.0.1-1.el6 @ovirt-3.5 Available Packages ovirt-engine-cli.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-dwh.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-dwh-setup.noarch 3.5.0-1.el6 ovirt-3.5 ovirt-engine-extensions-api-impl-javadoc.noarch 3.5.0.1-1.el6 ovirt-3.5 ovirt-engine-reports.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-reports-setup.noarch 3.5.1-0.1.el6 ovirt-3.5 ovirt-engine-sdk-java.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-sdk-java-javadoc.noarch 3.5.0.5-1.el6 ovirt-3.5 ovirt-engine-setup-plugin-allinone.noarch How can I get this package? Many thanks in advanced, Juanjo. On Tue, Nov 25, 2014 at 6:32 PM, Alon Bar-Lev alo...@redhat.com wrote: Hello Juan, Do you want to give a chance to the new provider? In this provider I can help? Package is ovirt-engine-extension-aaa-ldap. Documentation is available here[1]. The chances to make it work are higher, and this is the future of LDAP support. Alon [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Hello everybody, Ondra you are right, I removed the domain. I have already tried to execute the command with lower case the domain name and the result is the same engine-manage-domains add --domain=siee.local --provider=ad --user=Administrator --add-permissions Enter password: No user in Directory was found for Administrator@SIEE.LOCAL. Trying next LDAP server in list Failure while testing domain siee.local. Details: No user information was found for user the result to the command psql -U engine -d engine -c select * from vdc_options where option_name='LDAPSecurityAuthentication' is: psql: FATAL: Ident authentication failed for user engine And for second command psql -U engine -d engine -c update vdc_options set option_value='siee.local:GSSAPI' where option_name='LDAPSecurityAuthentication', I receive the same response: psql: FATAL: Ident authentication failed for user engine Is there any problem? Many thanks in advanced, Juanjo. On Mon, Nov 24, 2014 at 1:57 PM, Ondra Machacek omach...@redhat.com wrote: I understood that domain can be deleted, but can't be added, so there won't be needed values to update in vdc_options. Juanjo - Can you please provide us what's the result of command: $ psql -U engine -d engine -c select * from vdc_options where option_name='LDAPSecurityAuthentication' If it's empty or if the domain name is upper case or lower case? If it's upper, than please lower case it. $ psql -U engine -d engine -c update vdc_options set option_value='siee.local:GSSAPI' where option_name='LDAPSecurityAuthentication' - Original Message - From: Alon Bar-Lev alo...@redhat.com To: Ondra Machacek omach...@redhat.com Cc: jj197...@gmail.com, users@ovirt.org, Yair Zaslavsky yzasl...@redhat.com Sent: Monday, November 24, 2014 1:49:11 PM Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue - Original Message - From: Ondra Machacek omach...@redhat.com To: jj197...@gmail.com Cc: users@ovirt.org, Yair Zaslavsky yzasl...@redhat.com, Alon Bar-Lev alo...@redhat.com Sent: Monday, November 24, 2014 2:46:20 PM Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue Please try to run your command with domain in lower case: engine-manage-domains add --domain=siee.local --provider=ad --user=Administrator it is already added, won't it simpler to modify the vdc_options? - Original Message - From: Alon Bar-Lev alo...@redhat.com To: Juan Jose jj197...@gmail.com Cc: users@ovirt.org, Yair Zaslavsky yzasl...@redhat.com, Ondra Machacek omach...@redhat.com Sent: Monday, November 24, 2014 1:27:39 PM Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue Yes, I think we just fixed this[1]. We can fix this manually, yair, ondra what is the easiest fix? BTW: you can also checkout the new ldap provider (ovirt-engine-extension-aaa-ldap) in 3.5 which should be much more robust[1], I can help you set it up. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1167211 [2] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD - Original Message - From: Juan Jose jj197...@gmail.com To: users@ovirt.org Sent: Monday, November 24, 2014 2:22:44 PM Subject: [ovirt-users] Adding domain to oVirt to 3.5 issue Hello everybody, I have upgraded my oVirt 3.4 to 3.5 version without any problem apparently. After finish the upgrade I have tried to login with any of my AD users from my Samba 4, like I used to do in oVirt 3.4 but I received authentication errors as below error: 2014-11-21 14:06:02,681 ERROR [org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy] (ajp--127.0.0.1-8702-3) Kerberos error: Pre-authentication information was invalid (24) 2014-11-21 14:06:02,683 ERROR [org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy] (ajp--127.0.0.1-8702-3) Authentication Failed. Please verify the username and password. 2014-11-21 14:06:02,685 ERROR [org.ovirt.engine.extensions.aaa.builtin.kerberosldap.DirectorySearcher] (ajp--127.0.0.1-8702-3) Failed ldap search server ldap://adserver.siee.local:389 using user juanjo@SIEE.LOCAL due to Authentication Failed. Please verify the username and password.. We should not try the next server 2014-11-21 14:06:02,688 ERROR [org.ovirt.engine.extensions.aaa.builtin.kerberosldap.LdapBrokerCommandBase] (ajp--127.0.0.1-8702-3) Failed to run command LdapGetAdUserByUserNameCommand. Domain is siee.local. User is juanjo@SIEE.LOCAL. 2014-11-21 14:06:02,690 ERROR [org.ovirt.engine.core.bll.aaa.LoginAdminUserCommand] (ajp--127.0.0.1-8702-3) Error during CanDoActionFailure.: Class
Re: [ovirt-users] USB redirect
Hello Lev and Michal and everybody, My main question is: Is it necessary to install in Windows 7 client, no in the guest, the usbclerk to be able to get USB pen drive into the VM from the Windows 7 client?, in afirmative case, where can I get usbclerk? Many thanks in advanced, Juanjo. On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde lve...@redhat.com wrote: Hi Michal, As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO. The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client. I forwarded the issue to the Spice team, they could properly point to the issue. Thanks in advance, Lev Veyde. - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, November 21, 2014 3:07:09 PM Subject: Re: [ovirt-users] USB redirect On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote: Hello Michal and everybody, I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. Is it possible that this usbredir driver is not in this ISO? adding Lev who builds the ISO…can you please check? Thanks, michal Many thanks in advanced, Juanjo. On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Michal, I will try it and I will try to upgrade my oVirt 3.4. Thanks again and best regards, Juanjo. On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote: Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Hi, it's a regular part of the 3.5 release... http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ enjoy!:) Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users DeviceAdministrator.png ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] USB redirect
Thank you very much David, Now I have clear the issue. Juanjo. On Mon, Nov 24, 2014 at 12:19 PM, David Jaša dj...@redhat.com wrote: Hi Juan, Refer to this post, the state of affairs didn't chagne since then: http://lists.ovirt.org/pipermail/users/2013-May/014429.html David On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote: Hello Lev and Michal and everybody, My main question is: Is it necessary to install in Windows 7 client, no in the guest, the usbclerk to be able to get USB pen drive into the VM from the Windows 7 client?, in afirmative case, where can I get usbclerk? Many thanks in advanced, Juanjo. On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde lve...@redhat.com wrote: Hi Michal, As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO. The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client. I forwarded the issue to the Spice team, they could properly point to the issue. Thanks in advance, Lev Veyde. - Original Message - From: Michal Skrivanek michal.skriva...@redhat.com To: Juan Jose jj197...@gmail.com, Lev Veyde lve...@redhat.com Cc: users@ovirt.org List users@ovirt.org Sent: Friday, November 21, 2014 3:07:09 PM Subject: Re: [ovirt-users] USB redirect On Nov 13, 2014, at 12:00 , Juan Jose jj197...@gmail.com wrote: Hello Michal and everybody, I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. Is it possible that this usbredir driver is not in this ISO? adding Lev who builds the ISO…can you please check? Thanks, michal Many thanks in advanced, Juanjo. On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Michal, I will try it and I will try to upgrade my oVirt 3.4. Thanks again and best regards, Juanjo. On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote: Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Hi, it's a regular part of the 3.5 release... http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ enjoy!:) Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have
[ovirt-users] Adding domain to oVirt to 3.5 issue
Hello everybody,
I have upgraded my oVirt 3.4 to 3.5 version without any problem apparently.
After finish the upgrade I have tried to login with any of my AD users from
my Samba 4, like I used to do in oVirt 3.4 but I received authentication
errors as below error:
2014-11-21 14:06:02,681 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy]
(ajp--127.0.0.1-8702-3) Kerberos error: Pre-authentication information was
invalid (24)
2014-11-21 14:06:02,683 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.GSSAPIDirContextAuthenticationStrategy]
(ajp--127.0.0.1-8702-3) Authentication Failed. Please verify the username
and password.
2014-11-21 14:06:02,685 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.DirectorySearcher]
(ajp--127.0.0.1-8702-3) Failed ldap search server
ldap://adserver.siee.local:389 using user juanjo@SIEE.LOCAL due to
Authentication Failed. Please verify the username and password.. We should
not try the next server
2014-11-21 14:06:02,688 ERROR
[org.ovirt.engine.extensions.aaa.builtin.kerberosldap.LdapBrokerCommandBase]
(ajp--127.0.0.1-8702-3) Failed to run command
LdapGetAdUserByUserNameCommand. Domain is siee.local. User is
juanjo@SIEE.LOCAL.
2014-11-21 14:06:02,690 ERROR
[org.ovirt.engine.core.bll.aaa.LoginAdminUserCommand]
(ajp--127.0.0.1-8702-3) Error during CanDoActionFailure.: Class: class
org.ovirt.engine.core.extensions.mgr.ExtensionInvokeCommandFailedException
Input:
{Extkey[name=EXTENSION_INVOKE_CONTEXT;type=class
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_INVOKE_CONTEXT[886d2ebb-312a-49ae-9cc3-e1f849834b7d];]={Extkey[name=EXTENSION_INTERFACE_VERSION_MAX;type=class
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MAX[f4cff49f-2717-4901-8ee9-df362446e3e7];]=0,
Extkey[name=EXTENSION_LICENSE;type=class
java.lang.String;uuid=EXTENSION_LICENSE[8a61ad65-054c-4e31-9c6d-1ca4d60a4c18];]=ASL
2.0, Extkey[name=EXTENSION_HOME_URL;type=class
java.lang.String;uuid=EXTENSION_HOME_URL[4ad7a2f4-f969-42d4-b399-72d192e18304];]=
http://www.ovirt.org, Extkey[name=EXTENSION_LOCALE;type=class
java.lang.String;uuid=EXTENSION_LOCALE[0780b112-0ce0-404a-b85e-8765d778bb29];]=en_US,
Extkey[name=EXTENSION_NAME;type=class
java.lang.String;uuid=EXTENSION_NAME[651381d3-f54f-4547-bf28-b0b01a103184];]=Kerberos/Ldap
Authz (Built-in), Extkey[name=EXTENSION_INTERFACE_VERSION_MIN;type=class
java.lang.Integer;uuid=EXTENSION_INTERFACE_VERSION_MIN[2b84fc91-305b-497b-a1d7-d961b9d2ce0b];]=0,
Extkey[name=EXTENSION_CONFIGURATION;type=class
java.util.Properties;uuid=EXTENSION_CONFIGURATION[2d48ab72-f0a1-4312-b4ae-5068a226b0fc];]=***,
Extkey[name=EXTENSION_AUTHOR;type=class
java.lang.String;uuid=EXTENSION_AUTHOR[ef242f7a-2dad-4bc5-9aad-e07018b7fbcc];]=The
oVirt Project, Extkey[name=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE;type=class
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_MAX_FILTER_SIZE[2eb1f541-0f65-44a1-a6e3-014e247595f5];]=100,
Extkey[name=EXTENSION_INSTANCE_NAME;type=class
java.lang.String;uuid=EXTENSION_INSTANCE_NAME[65c67ff6-aeca-4bd5-a245-8674327f011b];]=siee.local,
Extkey[name=EXTENSION_BUILD_INTERFACE_VERSION;type=class
java.lang.Integer;uuid=EXTENSION_BUILD_INTERFACE_VERSION[cb479e5a-4b23-46f8-aed3-56a4747a8ab7];]=0,
Extkey[name=AAA_AUTHZ_CAPABILITIES;type=class
java.lang.Long;uuid=AAA_AUTHZ_CAPABILITIES[6106d1fb-9291-4351-a947-b897b9540a23];]=1,
Extkey[name=EXTENSION_CONFIGURATION_SENSITIVE_KEYS;type=interface
java.util.Collection;uuid=EXTENSION_CONFIGURATION_SENSITIVE_KEYS[a456efa1-73ff-4204-9f9b-ebff01e35263];]=[],
Extkey[name=EXTENSION_GLOBAL_CONTEXT;type=class
org.ovirt.engine.api.extensions.ExtMap;uuid=EXTENSION_GLOBAL_CONTEXT[9799e72f-7af6-4cf1-bf08-297bc8903676];]=*skip*,
Extkey[name=EXTENSION_VERSION;type=class
java.lang.String;uuid=EXTENSION_VERSION[fe35f6a8-8239-4bdb-ab1a-af9f779ce68c];]=N/A,
Extkey[name=AAA_AUTHZ_AVAILABLE_NAMESPACES;type=interface
java.util.Collection;uuid=AAA_AUTHZ_AVAILABLE_NAMESPACES[6dffa34c-955f-486a-bd35-0a272b45a711];]=[*],
Extkey[name=EXTENSION_MANAGER_TRACE_LOG;type=interface
org.slf4j.Logger;uuid=EXTENSION_MANAGER_TRACE_LOG[863db666-3ea7-4751-9695-918a3197ad83];]=org.slf4j.impl.Slf4jLogger(org.ovirt.engine.core.extensions.mgr.ExtensionsManager.trace.Kerberos/Ldap
Authz (Built-in).siee.local), Extkey[name=EXTENSION_PROVIDES;type=interface
java.util.Collection;uuid=EXTENSION_PROVIDES[8cf373a6-65b5-4594-b828-0e275087de91];]=[org.ovirt.engine.api.extensions.aaa.Authz]},
Extkey[name=AAA_AUTHZ_QUERY_FLAGS;type=class
java.lang.Integer;uuid=AAA_AUTHZ_QUERY_FLAGS[97d226e9-8d87-49a0-9a7f-af689320907b];]=3,
Extkey[name=EXTENSION_INVOKE_COMMAND;type=class
org.ovirt.engine.api.extensions.ExtUUID;uuid=EXTENSION_INVOKE_COMMAND[485778ab-bede-4f1a-b823-77b262a2f28d];]=AAA_AUTHZ_FETCH_PRINCIPAL_RECORD[5a5bf9bb-9336-4376-a823-26efe1ba26df],
Extkey[name=AAA_AUTHN_AUTH_RECORD;type=class
[ovirt-users] USB redirect
Hello everybody, Is it possible to redirect USB with oVirt 3.4?, I have found this: http://www.ovirt.org/OVirt_User_Guide#Using_USB_Devices_on_a_Windows_Client but I don't know where I can obtain this usbclerk or usbredir driver for Windows 7 clients. Could anyone to help me in this, please? Many thanks in advanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] USB redirect
Hello Michal and everybody, I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. Is it possible that this usbredir driver is not in this ISO? Many thanks in advanced, Juanjo. On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Michal, I will try it and I will try to upgrade my oVirt 3.4. Thanks again and best regards, Juanjo. On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 12, 2014, at 16:39 , Juan Jose jj197...@gmail.com wrote: Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Hi, it's a regular part of the 3.5 release... http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ enjoy!:) Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users DeviceAdministrator.png ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] USB redirect
Hello Michal or everybody, Could you tell me where can I get or download ovirt-guest-tool.iso? Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 11, 2014, at 11:08 , Juan Jose jj197...@gmail.com wrote: Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? usbredir drivers yes, you need them, they should be on the guest tools iso Thanks, michal Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users DeviceAdministrator.png ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] USB redirect
Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click File in remote-viewer USB device selection appears in grey and I can't select any USB device. Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? Many thanks in advanced, Juanjo. On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Nov 10, 2014, at 17:54 , Juan Jose jj197...@gmail.com wrote: Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration yes, that's the only supported way you should see the USB controller in devices but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. there used to be such issue in 3.4..it is fixed in 3.5 already. It should be a UI problem only… Thanks, michal Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] USB redirect
Hello everybody, I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? Many thanks in advanced. Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2.2 successfully connected to Samba4
Hello everybody, I can confirm also that after implement my Samba4 Active Directory emulation and add it to my engine it works fine. I can add users to my Samba4 and after that I can grant the permission in my engine webadmin portal and use my VMs. Now, as I told before I will try to create a process to import my OpenLDAP users to this Samba 4.0.6 to be able to use the ovirt by the students. Many thanks. Juanjo. On Mon, Jul 1, 2013 at 1:56 PM, Juan Jose jj197...@gmail.com wrote: Hello everybody, Thanks Gianluca for share your experience. I have now installed and configured a Samba 4.0.6 over Debian 7 Stable distro and I'm in the step of importing all my users from my production OpenLDAP + Samba 3 server to this new server which it's now working. After that I want join it to my oVirt engine. I will share too my experience when I have the system all working. Thanks again, Juanjo. On Fri, Jun 28, 2013 at 4:44 PM, Charlie medieval...@gmail.com wrote: Excellent, Gianluca, thanks for sharing the information! --Charlie On Fri, Jun 28, 2013 at 10:19 AM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: Hello, in the past there were some threads related to this subject. Today I successfully connected my oVirt 3.2.2 (installed on f18 with ovirt-repo) to a CentOS 6 samba4 server. Basically I followed this nice page for CentOS 6 with the difference that I downloaded and compiled 4.0.6 version of Samba instead of 4.0.0: http://opentodo.net/2013/01/samba4-as-ad-domain-controller-on-centos-6/ One important thing is that I had to put samba4 server ip in resolv.conf as the first for my engine. But in my case this was not a problem because samba4 is then configured with the original corporate dns as forwarder, so all is ok for me Some commands' output [root@c6dc samba-4.0.6]# /usr/local/samba/bin/samba-tool domain provision --realm=ovtest.local --domain=OVTEST --adminpass 'X' --server-role=dc --dns-backend=BIND9_DLZ Looking up IPv4 addresses Looking up IPv6 addresses No IPv6 address will be assigned Setting up secrets.ldb Setting up the registry Setting up the privileges database Setting up idmap db Setting up SAM db Setting up sam.ldb partitions and settings Setting up sam.ldb rootDSE Pre-loading the Samba 4 and AD schema Adding DomainDN: DC=ovtest,DC=local Adding configuration container Setting up sam.ldb schema Setting up sam.ldb configuration data Setting up display specifiers Modifying display specifiers Adding users container Modifying users container Adding computers container Modifying computers container Setting up sam.ldb data Setting up well known security principals Setting up sam.ldb users and groups Setting up self join Adding DNS accounts Creating CN=MicrosoftDNS,CN=System,DC=ovtest,DC=local Creating DomainDnsZones and ForestDnsZones partitions Populating DomainDnsZones and ForestDnsZones partitions See /usr/local/samba/private/named.conf for an example configuration include file for BIND and /usr/local/samba/private/named.txt for further documentation required for secure DNS updates Setting up sam.ldb rootDSE marking as synchronized Fixing provision GUIDs A Kerberos configuration suitable for Samba 4 has been generated at /usr/local/samba/private/krb5.conf Once the above files are installed, your Samba4 server will be ready to use Server Role: active directory domain controller Hostname: c6dc NetBIOS Domain:OVTEST DNS Domain:ovtest.local DOMAIN SID:S-1-5-21-4186344073-955232896-1764362378 [root@c6dc samba-4.0.6]# rndc-confgen -a -r /dev/urandom wrote key file /etc/rndc.key - tests (see also http://www.alexwyn.com/computer-tips/centos-samba4-active-directory-domain-controller ) [root@c6dc ]# /usr/local/samba/bin/smbclient -L localhost -U% Domain=[OVTEST] OS=[Unix] Server=[Samba 4.0.6] Sharename Type Comment - --- netlogonDisk sysvol Disk IPC$IPC IPC Service (Samba 4.0.6) Domain=[OVTEST] OS=[Unix] Server=[Samba 4.0.6] Server Comment ---- WorkgroupMaster ---- [root@c6dc ntp-4.2.6p5]# host -t SRV _ldap._tcp.ovtest.local. _ldap._tcp.ovtest.local has SRV record 0 100 389 c6dc.ovtest.local. [root@c6dc ntp-4.2.6p5]# host -t SRV _kerberos._udp.ovtest.local. _kerberos._udp.ovtest.local has SRV record 0 100 88 c6dc.ovtest.local. [root@c6dc ntp-4.2.6p5]# kinit administrator@OVTEST.LOCAL Password for administrator@OVTEST.LOCAL: Warning: Your password will expire in 41 days on Fri Aug 9 13:30:59 2013 [root@c6dc ntp-4.2.6p5]# klist Ticket cache: FILE:/tmp/krb5cc_0 Default principal: administrator@OVTEST.LOCAL Valid starting ExpiresService principal 06/28/13 14:55:11 06/29/13 00:55:11 krbtgt/OVTEST.LOCAL@OVTEST.LOCAL renew until 07/05/13 14:55:08 Users' mgmt
Re: [Users] oVirt 3.2.2 successfully connected to Samba4
Hello everybody, Thanks Gianluca for share your experience. I have now installed and configured a Samba 4.0.6 over Debian 7 Stable distro and I'm in the step of importing all my users from my production OpenLDAP + Samba 3 server to this new server which it's now working. After that I want join it to my oVirt engine. I will share too my experience when I have the system all working. Thanks again, Juanjo. On Fri, Jun 28, 2013 at 4:44 PM, Charlie medieval...@gmail.com wrote: Excellent, Gianluca, thanks for sharing the information! --Charlie On Fri, Jun 28, 2013 at 10:19 AM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: Hello, in the past there were some threads related to this subject. Today I successfully connected my oVirt 3.2.2 (installed on f18 with ovirt-repo) to a CentOS 6 samba4 server. Basically I followed this nice page for CentOS 6 with the difference that I downloaded and compiled 4.0.6 version of Samba instead of 4.0.0: http://opentodo.net/2013/01/samba4-as-ad-domain-controller-on-centos-6/ One important thing is that I had to put samba4 server ip in resolv.conf as the first for my engine. But in my case this was not a problem because samba4 is then configured with the original corporate dns as forwarder, so all is ok for me Some commands' output [root@c6dc samba-4.0.6]# /usr/local/samba/bin/samba-tool domain provision --realm=ovtest.local --domain=OVTEST --adminpass 'X' --server-role=dc --dns-backend=BIND9_DLZ Looking up IPv4 addresses Looking up IPv6 addresses No IPv6 address will be assigned Setting up secrets.ldb Setting up the registry Setting up the privileges database Setting up idmap db Setting up SAM db Setting up sam.ldb partitions and settings Setting up sam.ldb rootDSE Pre-loading the Samba 4 and AD schema Adding DomainDN: DC=ovtest,DC=local Adding configuration container Setting up sam.ldb schema Setting up sam.ldb configuration data Setting up display specifiers Modifying display specifiers Adding users container Modifying users container Adding computers container Modifying computers container Setting up sam.ldb data Setting up well known security principals Setting up sam.ldb users and groups Setting up self join Adding DNS accounts Creating CN=MicrosoftDNS,CN=System,DC=ovtest,DC=local Creating DomainDnsZones and ForestDnsZones partitions Populating DomainDnsZones and ForestDnsZones partitions See /usr/local/samba/private/named.conf for an example configuration include file for BIND and /usr/local/samba/private/named.txt for further documentation required for secure DNS updates Setting up sam.ldb rootDSE marking as synchronized Fixing provision GUIDs A Kerberos configuration suitable for Samba 4 has been generated at /usr/local/samba/private/krb5.conf Once the above files are installed, your Samba4 server will be ready to use Server Role: active directory domain controller Hostname: c6dc NetBIOS Domain:OVTEST DNS Domain:ovtest.local DOMAIN SID:S-1-5-21-4186344073-955232896-1764362378 [root@c6dc samba-4.0.6]# rndc-confgen -a -r /dev/urandom wrote key file /etc/rndc.key - tests (see also http://www.alexwyn.com/computer-tips/centos-samba4-active-directory-domain-controller ) [root@c6dc ]# /usr/local/samba/bin/smbclient -L localhost -U% Domain=[OVTEST] OS=[Unix] Server=[Samba 4.0.6] Sharename Type Comment - --- netlogonDisk sysvol Disk IPC$IPC IPC Service (Samba 4.0.6) Domain=[OVTEST] OS=[Unix] Server=[Samba 4.0.6] Server Comment ---- WorkgroupMaster ---- [root@c6dc ntp-4.2.6p5]# host -t SRV _ldap._tcp.ovtest.local. _ldap._tcp.ovtest.local has SRV record 0 100 389 c6dc.ovtest.local. [root@c6dc ntp-4.2.6p5]# host -t SRV _kerberos._udp.ovtest.local. _kerberos._udp.ovtest.local has SRV record 0 100 88 c6dc.ovtest.local. [root@c6dc ntp-4.2.6p5]# kinit administrator@OVTEST.LOCAL Password for administrator@OVTEST.LOCAL: Warning: Your password will expire in 41 days on Fri Aug 9 13:30:59 2013 [root@c6dc ntp-4.2.6p5]# klist Ticket cache: FILE:/tmp/krb5cc_0 Default principal: administrator@OVTEST.LOCAL Valid starting ExpiresService principal 06/28/13 14:55:11 06/29/13 00:55:11 krbtgt/OVTEST.LOCAL@OVTEST.LOCAL renew until 07/05/13 14:55:08 Users' mgmt can be done from windows with Samba AD management tools see: http://wiki.samba.org/index.php/Samba_AD_management_from_windows I managed from linux see: http://wiki.samba.org/index.php/Adding_users_with_samba_tool [root@c6dc ntp-4.2.6p5]# /usr/local/samba/bin/samba-tool user add OVIRTADM New Password: Retype Password: User 'OVIRTADM' created successfully [root@c6dc ntp-4.2.6p5]# /usr/local/samba/bin/wbinfo --name-to-sid OVIRTADM S-1-5-21-4186344073-955232896-1764362378-1104
Re: [Users] deduplication
Hello Jose, We are using only with iSCSI and as I have said it's working very well. We have three of this virtual servers that have the compression lzjb activated. The ratios are: Little server with Dovecot mail server has 21 GB and it has 8,6 GB real, save 60% space Little server with many log files has 11GB and it's using 2,2 GB real, save 80% space Little Windows Server OS for FlexLM and other software license control with 15 GB and it's using 9,2 GB real, save 40% space I hope this data are useful to you. Thanks, Juanjo. On Mon, Jun 3, 2013 at 6:12 PM, supo...@logicworks.pt wrote: Hi Juan, thanks for your info, I'll try to test FreeNAS with compression. Do you use it with iSCSI or NFS? Jose -- *From: *Juan Jose jj197...@gmail.com *To: *supo...@logicworks.pt, users@ovirt.org *Sent: *Segunda-feira, 3 de Junho de 2013 13:37:21 *Subject: *Re: [Users] deduplication Hello Jose, We also have FreeNAS working in our infraestructure, with about 3 TB and ZFS. Some of the pools has compression enabled and you can save space with it. We have this FreeNAS connected to a hypervisor Xen and it works very well and it's stable and sure. We have nine virtual servers some wirtualized and other paravirtualized, and some Windows Server machine all about 2 years in production without any problem. My idea is connect this infrastructure with oVirt wo be able to have some resources for test VMs in that. Only wanted to share as another FreeNas success experience. Juanjo. On Fri, May 31, 2013 at 12:33 PM, supo...@logicworks.pt wrote: Thanks a lot Karli, you make my mind clear about deduplication, once again we cannot have the best of both worlds. I'll try FreeNAS despite my poor knowledge on FreeBSD. Openfiler, running on Linux, has no better performance but supports DRDB. Jose -- *From: *Karli Sjöberg karli.sjob...@slu.se *To: *supo...@logicworks.pt *Cc: *Jiri Belka jbe...@redhat.com, users@ovirt.org *Sent: *Sexta-feira, 31 de Maio de 2013 10:45:41 *Subject: *Re: [Users] deduplication fre 2013-05-31 klockan 09:50 +0100 skrev supo...@logicworks.pt: So, we can say that dedup has more disadvantages than advantages. For a primary system; most definitely, yes. But for a backup system, that has tons of RAM and SSD's for cache, and you have lots of virtual machines that are based off of the template, or are very much the same, then you have a real use-case. I´m active at the FreeBSD forums where one person reports storing 150TB of data in only 30TB of physical disk. The best practice of scrubbing is once a week on enterprise systems, though he is only able to do it once a month, because that´s how long it takes for a scrub to complete in that system. So you´ve got to choose performance or savings, you can´t have both. And what about dedup of Netapp? Much better implementation, in my opinion. You are able schedule dedup-runs to go at night so your user´s performance isn´t impacted, and you get the savings. The question is if you value the savings enough to take on price-tag that is NetApp. Or just build your own FreeBSD/ZFS server with compression enabled and buy in standard HDD's from anywhere... We did;) /Karli Jose -- *From: *Karli Sjöberg karli.sjob...@slu.se *To: *supo...@logicworks.pt *Cc: *Jiri Belka jbe...@redhat.com, users@ovirt.org *Sent: *Quinta-feira, 30 de Maio de 2013 8:33:19 *Subject: *Re: [Users] deduplication ons 2013-05-29 klockan 09:59 +0100 skrev supo...@logicworks.pt: Absolutely agree with you, planning is the best thing to do, but normally people want a plug'n'play system with all included, because there is not much time to think and planning, and there are many companies that know how to take advantage of this people characteristics. Any way, I think another solution for dedup is FreeNAS using ZFS. FreeNAS is just FreeBSD with a fancy web-ui ontop, so it´s neither more or less of ZFS than you would have otherwise, And regarding dedup in ZFS; Just don´t, it´s not worth it! It´s said that it *may* increase performance when you have a very suitable usecase, e.g. everything * exactly* the same over and over. What´s not said is that scrubbing and resilvering slows down to a snail (from hundreds of MB/s, or GB if your system is large enough, down to less than 10), just from dedup. Also deleting snapshots of datasets that have(or have had) dedup on can kill the entire system, and when I say kill, I mean really fubar. Been there, regretted that... Now, compression on the other hand, you get basically for free and gives decent savings, I highly recommend that. /Karli Jose -- *From: *Jiri Belka jbe...@redhat.com *To: *supo...@logicworks.pt *Cc: *users@ovirt.org *Sent: *Quarta-feira, 29 de Maio de 2013 7:33:10 *Subject: *Re: [Users] deduplication On Tue, 28 May 2013 14:29:05 +0100
Re: [Users] deduplication
Hello Jose, We also have FreeNAS working in our infraestructure, with about 3 TB and ZFS. Some of the pools has compression enabled and you can save space with it. We have this FreeNAS connected to a hypervisor Xen and it works very well and it's stable and sure. We have nine virtual servers some wirtualized and other paravirtualized, and some Windows Server machine all about 2 years in production without any problem. My idea is connect this infrastructure with oVirt wo be able to have some resources for test VMs in that. Only wanted to share as another FreeNas success experience. Juanjo. On Fri, May 31, 2013 at 12:33 PM, supo...@logicworks.pt wrote: Thanks a lot Karli, you make my mind clear about deduplication, once again we cannot have the best of both worlds. I'll try FreeNAS despite my poor knowledge on FreeBSD. Openfiler, running on Linux, has no better performance but supports DRDB. Jose -- *From: *Karli Sjöberg karli.sjob...@slu.se *To: *supo...@logicworks.pt *Cc: *Jiri Belka jbe...@redhat.com, users@ovirt.org *Sent: *Sexta-feira, 31 de Maio de 2013 10:45:41 *Subject: *Re: [Users] deduplication fre 2013-05-31 klockan 09:50 +0100 skrev supo...@logicworks.pt: So, we can say that dedup has more disadvantages than advantages. For a primary system; most definitely, yes. But for a backup system, that has tons of RAM and SSD's for cache, and you have lots of virtual machines that are based off of the template, or are very much the same, then you have a real use-case. I´m active at the FreeBSD forums where one person reports storing 150TB of data in only 30TB of physical disk. The best practice of scrubbing is once a week on enterprise systems, though he is only able to do it once a month, because that´s how long it takes for a scrub to complete in that system. So you´ve got to choose performance or savings, you can´t have both. And what about dedup of Netapp? Much better implementation, in my opinion. You are able schedule dedup-runs to go at night so your user´s performance isn´t impacted, and you get the savings. The question is if you value the savings enough to take on price-tag that is NetApp. Or just build your own FreeBSD/ZFS server with compression enabled and buy in standard HDD's from anywhere... We did;) /Karli Jose -- *From: *Karli Sjöberg karli.sjob...@slu.se *To: *supo...@logicworks.pt *Cc: *Jiri Belka jbe...@redhat.com, users@ovirt.org *Sent: *Quinta-feira, 30 de Maio de 2013 8:33:19 *Subject: *Re: [Users] deduplication ons 2013-05-29 klockan 09:59 +0100 skrev supo...@logicworks.pt: Absolutely agree with you, planning is the best thing to do, but normally people want a plug'n'play system with all included, because there is not much time to think and planning, and there are many companies that know how to take advantage of this people characteristics. Any way, I think another solution for dedup is FreeNAS using ZFS. FreeNAS is just FreeBSD with a fancy web-ui ontop, so it´s neither more or less of ZFS than you would have otherwise, And regarding dedup in ZFS; Just don´t, it´s not worth it! It´s said that it *may* increase performance when you have a very suitable usecase, e.g. everything *exactly* the same over and over. What´s not said is that scrubbing and resilvering slows down to a snail (from hundreds of MB/s, or GB if your system is large enough, down to less than 10), just from dedup. Also deleting snapshots of datasets that have(or have had) dedup on can kill the entire system, and when I say kill, I mean really fubar. Been there, regretted that... Now, compression on the other hand, you get basically for free and gives decent savings, I highly recommend that. /Karli Jose -- *From: *Jiri Belka jbe...@redhat.com *To: *supo...@logicworks.pt *Cc: *users@ovirt.org *Sent: *Quarta-feira, 29 de Maio de 2013 7:33:10 *Subject: *Re: [Users] deduplication On Tue, 28 May 2013 14:29:05 +0100 (WEST) supo...@logicworks.pt wrote: That's why I'm making this questions, to demystify some buzzwords around here. But if you have a strong and good technology why not create buzzwords to get into as many people as possible? without trapped them. Share a disk containing static data is a good idea, do you know from where I can start? Everything depends on your needs, design planning. Maybe then sharing disk would be better to share via NFS/iscsi. Of course if you have many VMs each of them is different you will fail. But if you have mostly homogeneous environment you can think about this approach. Sure you have to have plan for upgrading base static shared OS data, you have to have plan how to install additional software (different destination than /usr or /usr/local)... If you already have your own build host which builds for you OS packages and you have already your own plan for deployment, you have done first
Re: [Users] DNS reverse configuration
Hello everybody, Has Someone succefully connected ovirt engine to Samba4 to be able to authenticate user from this kind of server?, Eduardo, have you succeed in your attemp to connect engine to Samba4?, I would like to do the same and engine can authenticate other users. I would like to do this without Windows Active Directory. Many thanks in avanced, Juanjo. On Tue, Apr 9, 2013 at 2:12 PM, Eduardo Ramos edua...@freedominterface.orgwrote: Hi Roy! In fact engine-config -a works fine. It shows me the db config content. By the way, that engine is running ok as well. I just can't get engine connected to my samba4. Watching postgresql log file, whenever I use engine-manage-domains or engine-config, the following messages are appended: LOG: connection received: host=localhost port=1 LOG: connection authorized: user=engine database=engine LOG: unexpected EOF on client connection But engine-config works fine. I'm using CentOS 6.3 and using yum there are not update for postgresql or jdbc to update. The same with ovirt-engine. I'm really not understanding why it doesn't works. On 04/07/2013 05:57 AM, Roy Golan wrote: On 04/04/2013 09:45 PM, Eduardo Ramos wrote: Hi all! I'm trying to connect my ovirt-engine in a samba4 server. Samba4 is ActiveDirectory complaint. But when I use engine-manage-domains, it returns me a strange message: [root@ovirt-dir eduardo]# engine-manage-domains -action=add -domain= gsr.inpe.br -provider=activeDirectory -user=Administrator -interactive Enter password: Error: Authentication Failed. Error in DNS configuration. Please verify the oVirt Engine host has a valid reverse DNS (PTR) record.. Problematic domain is: getconnection: driver class name=org.postgresql.xa.pgxadatasourcegetconnection: url=jdbc:postgresql://localhost:5432/enginegetconnection: considering encrypted passord. it looks like engine-config have problems opening a db connection. The DNS reported error is a bug and is shown due to the connection error. you should get that same error if you'll use $ engine.config -a you have some problem connecting to the localhost postgres instance using the password entered during setup probably. is your postgresql instance up the engine is able to connect to the db? engine-config is getting the password from the same source where the engine does. also, a PTR record is no longer needed since openjdk 7 due to a change in the impl of the krb5 module. secdomain=encryptdbpasswordexecute: beginning execution of action action_get.fetching key=domainname ver=general Failure while applying Kerberos configuration. Details: Authentication Failed. Error in DNS configuration. Please verify the oVirt Engine host has a valid reverse DNS (PTR) record. Using host command, I got the following results: [root@ovirt-dir eduardo]# host ovirt-dir.gsr.inpe.br ovirt-dir.gsr.inpe.br has address 150.163.80.125 [root@ovirt-dir eduardo]# host 150.163.80.125 125.80.163.150.in-addr.arpa domain name pointer ovirt-dir.gsr.inpe.br. [root@ovirt-dir eduardo]# host -t srv _kerberos._tcp.gsr.inpe.br _kerberos._tcp.gsr.inpe.br has SRV record 1 0 88 samba4.gsr.inpe.br. [root@ovirt-dir eduardo]# host samba4.gsr.inpe.br samba4.gsr.inpe.br has address 150.163.73.109 [root@ovirt-dir eduardo]# host 150.163.73.109 109.73.163.150.in-addr.arpa domain name pointer samba4.gsr.inpe.br. As you can see, it is everything ok. No DNS problem. Someone have any idea? Thanks. ___ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Hello Karli, You are wellcome, yes, at the moment we are testing but our idea is to connect engine to a user validation system. I will try to do it using Samba4 system and all needed pieces. Thanks, Juanjo. On Fri, Apr 12, 2013 at 1:41 PM, Itamar Heim ih...@redhat.com wrote: On 04/12/2013 11:27 AM, Karli Sjöberg wrote: Hey Everyone! I solved it! I friggin solved it, and it didn´t have anything to do with the spice-client, spice-plugin(ActiveX or XPI), or userportal specifically, it´s in the engine itself! So Juanjo here said that it works for him, and I took a guess that´s because he is only using admin@internal mailto:admin@internal for testing (correct me if I´m wrong Juanjo), so I added a UserRole to admin on a test VM, logged into Userportal, clicked for console, and it worked! So, since our setup is a little more complex, as it´s connected to our ActiveDirectory, I concluded that it must be a permissions related issue. I created a new UserRole, called ConsoleOwner that only have Login Permissions and RemoteLogin and added that role to our engine´s System Permissions on a directory group as broad as possible. After that if I also added an explicit UserRole permission for a directory user on any VM now it works 100%. Me so happy!:) A question goes out the developers: Should you have to do that? I thought that permissions where supposed to be calculated like Windows ACLs Effective Permissions, so that if I just add sufficient permissions for a directory user on a VM, it´s effective permissions should have granted the necessary abilities in the system, without me having to first add that as a big system permission to have them granted? Bug, or intended? Thank you so much Juanjo, for posting the versions you are currently using that proved that it should work, and that it had to be something else that prevented us from using it (which it was). Thank you! can you please clarify again which permission you granted to a user on the VM which didn't work before you added to the user the console permission? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How to force remove hosts, storage, datacenters
Hello Gianluca, Recently I had a problem similar caused for an electrical power down unexpected. To remove VMs and storage domain I had to add first a new Master storage domain and after that I could delete it because they didn't exist fisically. I don't know If you have some element as VMs that are attached to this host or something like that. I hope that this cab be helpful. Juanjo. On Wed, Apr 10, 2013 at 11:27 PM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: Hello, I have some inconsistencies so that I would like to reinitialize my datacenter. It is 3.2.1 on f18 engine and f18 host it consists of one host and one local_on_host storage domain I'm not able to delete the host. It results as unassigned and so I cannot delete it, but if I try to remove storage or datacenter I get: storage: destroy -- approve Error while executing action: Cannot destroy the master Storage Domain from the Data Center without another active Storage Domain to take its place. -Either activate another Storage Domain in the Data Center, or remove the Data Center. -If you have problems with the master Data Domain, consider following the recovery process described in the documentation, or contact your system administrator. datacenter: force remove -- approve Error: Cannot remove Repository while there are Hosts that are not in Maintenance mode. what can I do to force remove a host? The maintenance label is greyed out and it results as unassigned Thanks, Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Hello Karli, No problem, the output of rpm query is: [root@ovirt-engine ~]# rpm -qa | grep ovirt ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch ovirt-engine-restapi-3.1.0-2.fc17.noarch ovirt-engine-backend-3.1.0-2.fc17.noarch ovirt-engine-config-3.1.0-2.fc17.noarch ovirt-release-fedora-4-2.noarch ovirt-engine-sdk-3.1.0.4-1.fc17.noarch ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch ovirt-engine-genericapi-3.1.0-2.fc17.noarch ovirt-engine-tools-common-3.1.0-2.fc17.noarch ovirt-engine-dbscripts-3.1.0-2.fc17.noarch ovirt-engine-userportal-3.1.0-2.fc17.noarch ovirt-engine-notification-service-3.1.0-2.fc17.noarch ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch ovirt-engine-webadmin-portal-3.1.0-2.fc17.noarch ovirt-engine-setup-3.1.0-2.fc17.noarch ovirt-engine-3.1.0-2.fc17.noarch I hope this help you to test your system. If you need some other information I will be happy to help. Juanjo. On Thu, Apr 11, 2013 at 6:55 AM, Karli Sjöberg karli.sjob...@slu.se wrote: ** ons 2013-04-10 klockan 17:22 +0200 skrev Juan Jose: Yes, User portal works fine at the moment. I want to install spice-guest-tools to improve the windows VM integration in client machine. After that I will try to add a server user validation. Great to hear that! Although the topic is 3.2 final status..., I would like the output of rpm -qa | grep ovirt from your engine. I´m stuck at 3.1.0-4, since it is still impossible to upgrade. But as soon as that´s fixed I´ll be able to try and confirm this as well. /Karli Many thanks, Juanjo. On Wed, Apr 10, 2013 at 6:46 AM, Karli Sjöberg karli.sjob...@slu.se wrote: tis 2013-04-09 klockan 17:11 +0200 skrev Juan Jose: Yes host or node, is my machine that has the hypervisor and yes I tried open console from Admin-Portal and It didn't work. Now both are working in a Win7 client with IE 9. Is the User-portal working as well? Many thanks again, Juanjo. On Tue, Apr 9, 2013 at 2:53 PM, Karli Sjöberg karli.sjob...@slu.se wrote: tis 2013-04-09 klockan 13:49 +0200 skrev Juan Jose: Hello David, My problem was that I needed to add my host to \windows\system32\driver\etc\hosts file moreover to have virt-viewer installed in the Windows 7 client. Now I can open the console after that. When you say host, I´m guessing you mean the hypervisor that is running the VM you want to access. Have you tried opening console through *Admin*-portal, *User*-portal, or both? And they all work? /Karli Many thanks, Juanjo. On Mon, Apr 8, 2013 at 4:23 PM, David Jaša dj...@redhat.com wrote: Hi Juan, Juan Jose píše v Po 08. 04. 2013 v 14:36 +0200: Hello evrybody, I'm testing open console in a Windows 7 client with IE 9 and when I try to click in console when I'm inside User Portal with wirt-viewer installad, it is launched but and virt-viewer give me the message Unable to connect to graphic server and It can't connect to my VM. Any suggest? I've described the debugging steps on this list in the past, please look them up and go through spicex.log. If that isn't sufficient, please use debug-helper.exe (IIRC I described it in another mail here) to get remote-viewer debug output. HTH, David Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 1:49 PM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: On Wed, Mar 20, 2013 at 10:43 PM, Jeff Bailey wrote: On 3/20/2013 5:20 AM, Christophe Fergeau wrote: On Tue, Mar 19, 2013 at 05:11:56PM -0400, Jeff Bailey wrote: Heh, heh, maybe it's a secret. :) Actually, I believe I got it from http://elmarco.fedorapeople.org/spice.cab and it seems to be version 5.0.2.2. As already pointed in another mail of this same thread from Michal Skrivanek (about a month ago), the info is at http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal and the page indeed contains the same link to spice.cab file you are referring so possibly difficult to find but not a secret... ;-) Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- David Jaša, RHCE SPICE QE based in Brno GPG Key: 22C33E24 Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24 -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se karli.sjob...@adm.slu.se
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Hello again Karli, In this mail thread itself, David give me some indication about how I could to debug my spice connection in the client looking at spicex.log or installing debug-helper.exe. I try to search spicex.log and I tried to install debug-helper.exe. Searching this debug application I found this thread in u...@ovirt.org historical mail list: http://lists.ovirt.org/pipermail/users/2013-January/011466.html And as you see in the Itamar Heim response to Dennis Böck, the host has to be accessible and resolvable and to have spice ports open to the client. I didn't have my host, or node as you want name it, machine configured in the client hosts file. I had spice ports opened, I only tried to configure node hostname in the client host file and voilà, it works. This is all my history. Of course, I have also the engine machine configure in the client hosts file. I have this configuration because this both machines aren't configure in my corporative DNS. Again, I hope that it was useful. Juanjo. On Thu, Apr 11, 2013 at 1:21 PM, Karli Sjöberg karli.sjob...@slu.se wrote: ** tor 2013-04-11 klockan 13:12 +0200 skrev Juan Jose: Hello Karli, No problem, the output of rpm query is: [root@ovirt-engine ~]# rpm -qa | grep ovirt ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch ovirt-engine-restapi-3.1.0-2.fc17.noarch ovirt-engine-backend-3.1.0-2.fc17.noarch ovirt-engine-config-3.1.0-2.fc17.noarch ovirt-release-fedora-4-2.noarch ovirt-engine-sdk-3.1.0.4-1.fc17.noarch ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch ovirt-engine-genericapi-3.1.0-2.fc17.noarch ovirt-engine-tools-common-3.1.0-2.fc17.noarch ovirt-engine-dbscripts-3.1.0-2.fc17.noarch ovirt-engine-userportal-3.1.0-2.fc17.noarch What the heck, 3.1.0-2?! Then why the doodoo doesn´t it work for us on 3.1.0-4?! Have you turned off SSL or something? I´m wondering what could be different on your system compared to ours... ovirt-engine-notification-service-3.1.0-2.fc17.noarch ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch ovirt-engine-webadmin-portal-3.1.0-2.fc17.noarch ovirt-engine-setup-3.1.0-2.fc17.noarch ovirt-engine-3.1.0-2.fc17.noarch I hope this help you to test your system. If you need some other information I will be happy to help. Yeah, how did you reach the conslusion that you needed to edit your host-file for it to start working? Did you follow any debugging instructions previously mentioned, and if you did, please explain how step by step so I can test and try to debug our systems as well? Juanjo. On Thu, Apr 11, 2013 at 6:55 AM, Karli Sjöberg karli.sjob...@slu.se wrote: ons 2013-04-10 klockan 17:22 +0200 skrev Juan Jose: Yes, User portal works fine at the moment. I want to install spice-guest-tools to improve the windows VM integration in client machine. After that I will try to add a server user validation. Great to hear that! Although the topic is 3.2 final status..., I would like the output of rpm -qa | grep ovirt from your engine. I´m stuck at 3.1.0-4, since it is still impossible to upgrade. But as soon as that´s fixed I´ll be able to try and confirm this as well. /Karli Many thanks, Juanjo. On Wed, Apr 10, 2013 at 6:46 AM, Karli Sjöberg karli.sjob...@slu.se wrote: tis 2013-04-09 klockan 17:11 +0200 skrev Juan Jose: Yes host or node, is my machine that has the hypervisor and yes I tried open console from Admin-Portal and It didn't work. Now both are working in a Win7 client with IE 9. Is the User-portal working as well? Many thanks again, Juanjo. On Tue, Apr 9, 2013 at 2:53 PM, Karli Sjöberg karli.sjob...@slu.se wrote: tis 2013-04-09 klockan 13:49 +0200 skrev Juan Jose: Hello David, My problem was that I needed to add my host to \windows\system32\driver\etc\hosts file moreover to have virt-viewer installed in the Windows 7 client. Now I can open the console after that. When you say host, I´m guessing you mean the hypervisor that is running the VM you want to access. Have you tried opening console through *Admin*-portal, *User*-portal, or both? And they all work? /Karli Many thanks, Juanjo. On Mon, Apr 8, 2013 at 4:23 PM, David Jaša dj...@redhat.com wrote: Hi Juan, Juan Jose píše v Po 08. 04. 2013 v 14:36 +0200: Hello evrybody, I'm testing open console in a Windows 7 client with IE 9 and when I try to click in console when I'm inside User Portal with wirt-viewer installad, it is launched but and virt-viewer give me the message Unable to connect to graphic server and It can't connect to my VM. Any suggest? I've described the debugging steps on this list in the past, please look them up and go through spicex.log. If that isn't sufficient, please use debug-helper.exe (IIRC I described it in another mail here) to get remote-viewer debug output. HTH, David Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 1:49 PM, Gianluca Cecchi
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Yes, User portal works fine at the moment. I want to install spice-guest-tools to improve the windows VM integration in client machine. After that I will try to add a server user validation. Many thanks, Juanjo. On Wed, Apr 10, 2013 at 6:46 AM, Karli Sjöberg karli.sjob...@slu.se wrote: ** tis 2013-04-09 klockan 17:11 +0200 skrev Juan Jose: Yes host or node, is my machine that has the hypervisor and yes I tried open console from Admin-Portal and It didn't work. Now both are working in a Win7 client with IE 9. Is the User-portal working as well? Many thanks again, Juanjo. On Tue, Apr 9, 2013 at 2:53 PM, Karli Sjöberg karli.sjob...@slu.se wrote: tis 2013-04-09 klockan 13:49 +0200 skrev Juan Jose: Hello David, My problem was that I needed to add my host to \windows\system32\driver\etc\hosts file moreover to have virt-viewer installed in the Windows 7 client. Now I can open the console after that. When you say host, I´m guessing you mean the hypervisor that is running the VM you want to access. Have you tried opening console through *Admin*-portal, *User*-portal, or both? And they all work? /Karli Many thanks, Juanjo. On Mon, Apr 8, 2013 at 4:23 PM, David Jaša dj...@redhat.com wrote: Hi Juan, Juan Jose píše v Po 08. 04. 2013 v 14:36 +0200: Hello evrybody, I'm testing open console in a Windows 7 client with IE 9 and when I try to click in console when I'm inside User Portal with wirt-viewer installad, it is launched but and virt-viewer give me the message Unable to connect to graphic server and It can't connect to my VM. Any suggest? I've described the debugging steps on this list in the past, please look them up and go through spicex.log. If that isn't sufficient, please use debug-helper.exe (IIRC I described it in another mail here) to get remote-viewer debug output. HTH, David Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 1:49 PM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: On Wed, Mar 20, 2013 at 10:43 PM, Jeff Bailey wrote: On 3/20/2013 5:20 AM, Christophe Fergeau wrote: On Tue, Mar 19, 2013 at 05:11:56PM -0400, Jeff Bailey wrote: Heh, heh, maybe it's a secret. :) Actually, I believe I got it from http://elmarco.fedorapeople.org/spice.cab and it seems to be version 5.0.2.2. As already pointed in another mail of this same thread from Michal Skrivanek (about a month ago), the info is at http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal and the page indeed contains the same link to spice.cab file you are referring so possibly difficult to find but not a secret... ;-) Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- David Jaša, RHCE SPICE QE based in Brno GPG Key: 22C33E24 Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24 -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se karli.sjob...@adm.slu.se -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se karli.sjob...@adm.slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Hello David, My problem was that I needed to add my host to \windows\system32\driver\etc\hosts file moreover to have virt-viewer installed in the Windows 7 client. Now I can open the console after that. Many thanks, Juanjo. On Mon, Apr 8, 2013 at 4:23 PM, David Jaša dj...@redhat.com wrote: Hi Juan, Juan Jose píše v Po 08. 04. 2013 v 14:36 +0200: Hello evrybody, I'm testing open console in a Windows 7 client with IE 9 and when I try to click in console when I'm inside User Portal with wirt-viewer installad, it is launched but and virt-viewer give me the message Unable to connect to graphic server and It can't connect to my VM. Any suggest? I've described the debugging steps on this list in the past, please look them up and go through spicex.log. If that isn't sufficient, please use debug-helper.exe (IIRC I described it in another mail here) to get remote-viewer debug output. HTH, David Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 1:49 PM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: On Wed, Mar 20, 2013 at 10:43 PM, Jeff Bailey wrote: On 3/20/2013 5:20 AM, Christophe Fergeau wrote: On Tue, Mar 19, 2013 at 05:11:56PM -0400, Jeff Bailey wrote: Heh, heh, maybe it's a secret. :) Actually, I believe I got it from http://elmarco.fedorapeople.org/spice.cab and it seems to be version 5.0.2.2. As already pointed in another mail of this same thread from Michal Skrivanek (about a month ago), the info is at http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal and the page indeed contains the same link to spice.cab file you are referring so possibly difficult to find but not a secret... ;-) Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- David Jaša, RHCE SPICE QE based in Brno GPG Key: 22C33E24 Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] DNS reverse configuration
Hello everybody, Is there some howto or some procedure to connect Samba4 to oVirt 3.1 and what components are necessary to install and configure?, René, can you post all steps to configure it to have oVirt working with Sanba 4, please? Many thanks in avanced, Juanjo. On Fri, Apr 5, 2013 at 1:28 PM, Eduardo Ramos edua...@freedominterface.orgwrote: Even though ovirt-engine did not tried connect to samba4, I used another user. The issue is that engine-manage-domains said not found PTR entry, although host/nslookup/dig command say the opposite. Is there any detail? On 04/04/2013 05:36 PM, Gianluca Cecchi wrote: On Thu, Apr 4, 2013 at 8:48 PM, Chris Noffsinger wrote: I have successfully gotten samba4 to work with ovirt but I could not use the Administrator user. I had to create another admin user to. Get it to work. Chris Noffsinger It is intended to be so and I think it is the right thing to separate respective roles. I had to do the same with FreeIPA. Gianluca __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage problem
Hello Maor, I have alredy been able to recover my system and my NFS domains. Many thanks, Juanjo. On Tue, Mar 26, 2013 at 9:11 PM, Juan Jose jj197...@gmail.com wrote: Many thanks Maor, Yes my Host is UP without problems. I will attach a new Storage as Master domain and I will see if after that I will be able to delete VMs and VHD. Thanks again and I will inform about the progress. Juanjo. On Thu, Mar 21, 2013 at 5:13 PM, Maor Lipchuk mlipc...@redhat.com wrote: On 03/21/2013 06:12 PM, Maor Lipchuk wrote: Was VDSM restart did any change? If your host is UP and running you can try to Re-initialize your data center (By right click on the Data Center) and pick a new storage to be the master. You will need first to add a new storage to the setup This will change your DC to be active again, but you will still need to delete the disks from the old storage. If your old storage can be active after the reinitialize there will be no problem to delete the disks. On 03/21/2013 06:05 PM, Juan Jose wrote: I'm using oVirt 3.1. I have checked my storage domain and because a the power failure that I had I have lost all my VM in the storage. Now I would like to know how can I delete my VMs from Admin portal. For now it is impossible because Default Data Center is down because I can't attach Master domain. I'm in a kind of loop that I don't now how to fix. I guess that it is necessary to delete VMs from DB directly but I'm asking if it is possible to have some kind of workaround for these situations. Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 4:52 PM, Maor Lipchuk mlipc...@redhat.com mailto:mlipc...@redhat.com wrote: thanks for the logs. What ovirt version are you using? Can you try to restart VDSM service on your host. Regards, Maor On 03/21/2013 01:16 PM, Juan Jose wrote: Hello Maor, I have tried to apply the bug procedure and nothing happens and if I lauch the query: psql -U engine -c SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; engine And the result is: option_value - (0 rows) And my Master Storage continue disable. Attach engine.log also. Many thanks, Juanjo. On Wed, Mar 20, 2013 at 5:02 PM, Maor Lipchuk mlipc...@redhat.com mailto:mlipc...@redhat.com mailto:mlipc...@redhat.com mailto:mlipc...@redhat.com wrote: On 03/20/2013 05:58 PM, Maor Lipchuk wrote: Hi Juan, I think you encountered this bug https://bugzilla.redhat.com/881941, the log there is quite the same. The auto recovery process should fix that after 15 minutes, but need to see if it is enabled in your environment. The auto recovery should be enabled by default on your env, but just to make sure you can check it in the engine DB with this query: SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; On 03/20/2013 05:29 PM, Juan Jose wrote: I forgot the vdsm.log file, Thanks, Juanjo. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage problem
Many thanks Maor, Yes my Host is UP without problems. I will attach a new Storage as Master domain and I will see if after that I will be able to delete VMs and VHD. Thanks again and I will inform about the progress. Juanjo. On Thu, Mar 21, 2013 at 5:13 PM, Maor Lipchuk mlipc...@redhat.com wrote: On 03/21/2013 06:12 PM, Maor Lipchuk wrote: Was VDSM restart did any change? If your host is UP and running you can try to Re-initialize your data center (By right click on the Data Center) and pick a new storage to be the master. You will need first to add a new storage to the setup This will change your DC to be active again, but you will still need to delete the disks from the old storage. If your old storage can be active after the reinitialize there will be no problem to delete the disks. On 03/21/2013 06:05 PM, Juan Jose wrote: I'm using oVirt 3.1. I have checked my storage domain and because a the power failure that I had I have lost all my VM in the storage. Now I would like to know how can I delete my VMs from Admin portal. For now it is impossible because Default Data Center is down because I can't attach Master domain. I'm in a kind of loop that I don't now how to fix. I guess that it is necessary to delete VMs from DB directly but I'm asking if it is possible to have some kind of workaround for these situations. Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 4:52 PM, Maor Lipchuk mlipc...@redhat.com mailto:mlipc...@redhat.com wrote: thanks for the logs. What ovirt version are you using? Can you try to restart VDSM service on your host. Regards, Maor On 03/21/2013 01:16 PM, Juan Jose wrote: Hello Maor, I have tried to apply the bug procedure and nothing happens and if I lauch the query: psql -U engine -c SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; engine And the result is: option_value - (0 rows) And my Master Storage continue disable. Attach engine.log also. Many thanks, Juanjo. On Wed, Mar 20, 2013 at 5:02 PM, Maor Lipchuk mlipc...@redhat.com mailto:mlipc...@redhat.com mailto:mlipc...@redhat.com mailto:mlipc...@redhat.com wrote: On 03/20/2013 05:58 PM, Maor Lipchuk wrote: Hi Juan, I think you encountered this bug https://bugzilla.redhat.com/881941, the log there is quite the same. The auto recovery process should fix that after 15 minutes, but need to see if it is enabled in your environment. The auto recovery should be enabled by default on your env, but just to make sure you can check it in the engine DB with this query: SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; On 03/20/2013 05:29 PM, Juan Jose wrote: I forgot the vdsm.log file, Thanks, Juanjo. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage problem
Hello Maor, I realize that I have lost all my VMs with my electrical power blackout. My problem now is that I hve some VMs that I can see in my admin portal and it doesn't exist in the storage domain. How ca I delete them because form admin portal this needs to have Default Data Center up, and it needs Master domain Up but I can't because there aren't my VM inside. How can I delete the VM?, is it exists some workaround in this kind of issues to follow? Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 12:16 PM, Juan Jose jj197...@gmail.com wrote: Hello Maor, I have tried to apply the bug procedure and nothing happens and if I lauch the query: psql -U engine -c SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; engine And the result is: option_value - (0 rows) And my Master Storage continue disable. Attach engine.log also. Many thanks, Juanjo. On Wed, Mar 20, 2013 at 5:02 PM, Maor Lipchuk mlipc...@redhat.com wrote: On 03/20/2013 05:58 PM, Maor Lipchuk wrote: Hi Juan, I think you encountered this bug https://bugzilla.redhat.com/881941, the log there is quite the same. The auto recovery process should fix that after 15 minutes, but need to see if it is enabled in your environment. The auto recovery should be enabled by default on your env, but just to make sure you can check it in the engine DB with this query: SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; On 03/20/2013 05:29 PM, Juan Jose wrote: I forgot the vdsm.log file, Thanks, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Ja, Ja, of course not, I have had a power failure in my test installation and I have lost all my VMs and now I have already sent a mail to this list to ask if it is possible to have some workaround about that because I'm in a kind of loop. I can't Activate my Master domain storage because it is empty and my Default Data Center can't be enable. In the other hand I have in my Admin portal some Templates and VMs that they don't exist and I can't delete because I need Data Center on-line. I guess that I will have to clean DB o something like that. I'm waiting if some king of workaround to this issue exists. If you now how to manage this I will be happy to listen you, sorry, read you. Many thanks in avanced, Juanjo. On Wed, Mar 20, 2013 at 10:43 PM, Jeff Bailey bai...@cs.kent.edu wrote: On 3/20/2013 5:20 AM, Christophe Fergeau wrote: On Tue, Mar 19, 2013 at 05:11:56PM -0400, Jeff Bailey wrote: On 3/19/2013 11:05 AM, Christophe Fergeau wrote: As far as I know, there haven't been public spicex releases, so I'm not sure where this spicex used with oVirt comes from. I was referring to the log file named spicex related to the activex plugin. Yes, I got that part, but same answer, as far as I know there hasn't been any public releases of the activex plugin ;) Heh, heh, maybe it's a secret. :) Actually, I believe I got it from http://elmarco.fedorapeople.org/spice.cab and it seems to be version 5.0.2.2. Christophe ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage problem
I'm using oVirt 3.1. I have checked my storage domain and because a the power failure that I had I have lost all my VM in the storage. Now I would like to know how can I delete my VMs from Admin portal. For now it is impossible because Default Data Center is down because I can't attach Master domain. I'm in a kind of loop that I don't now how to fix. I guess that it is necessary to delete VMs from DB directly but I'm asking if it is possible to have some kind of workaround for these situations. Many thanks in avanced, Juanjo. On Thu, Mar 21, 2013 at 4:52 PM, Maor Lipchuk mlipc...@redhat.com wrote: thanks for the logs. What ovirt version are you using? Can you try to restart VDSM service on your host. Regards, Maor On 03/21/2013 01:16 PM, Juan Jose wrote: Hello Maor, I have tried to apply the bug procedure and nothing happens and if I lauch the query: psql -U engine -c SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; engine And the result is: option_value - (0 rows) And my Master Storage continue disable. Attach engine.log also. Many thanks, Juanjo. On Wed, Mar 20, 2013 at 5:02 PM, Maor Lipchuk mlipc...@redhat.com mailto:mlipc...@redhat.com wrote: On 03/20/2013 05:58 PM, Maor Lipchuk wrote: Hi Juan, I think you encountered this bug https://bugzilla.redhat.com/881941, the log there is quite the same. The auto recovery process should fix that after 15 minutes, but need to see if it is enabled in your environment. The auto recovery should be enabled by default on your env, but just to make sure you can check it in the engine DB with this query: SELECT option_value FROM vdc_options where option_name = 'AutoRecoveryAllowedTypes'; On 03/20/2013 05:29 PM, Juan Jose wrote: I forgot the vdsm.log file, Thanks, Juanjo. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Problem with Storage
Hello everybody,
I had my system working, oVirt 3.1, my engine and one host, both with
Fedora 17. Suddenly electrical power off and I don't have any UPS in my
experimental machines. Now I have restarted the system and I have my engine
and host up but when I try to Activate Master Storage i receive this error:
Thread-8683::DEBUG::2013-03-20
16:17:14,530::resourceManager::565::ResourceManager::(releaseResource) No
one is waiting for resource 'Storage.d6e7e8b8-49c7-11e2-a261-000a5e429f63',
Clearing records.
Thread-8683::ERROR::2013-03-20
16:17:14,531::task::853::TaskManager.Task::(_setError)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::Unexpected error
Traceback (most recent call last):
File /usr/share/vdsm/storage/task.py, line 861, in _run
return fn(*args, **kargs)
File /usr/share/vdsm/logUtils.py, line 38, in wrapper
res = f(*args, **kwargs)
File /usr/share/vdsm/storage/hsm.py, line 817, in connectStoragePool
return self._connectStoragePool(spUUID, hostID, scsiKey, msdUUID,
masterVersion, options)
File /usr/share/vdsm/storage/hsm.py, line 859, in _connectStoragePool
res = pool.connect(hostID, scsiKey, msdUUID, masterVersion)
File /usr/share/vdsm/storage/sp.py, line 641, in connect
self.__rebuild(msdUUID=msdUUID, masterVersion=masterVersion)
File /usr/share/vdsm/storage/sp.py, line 1109, in __rebuild
self.masterDomain = self.getMasterDomain(msdUUID=msdUUID,
masterVersion=masterVersion)
File /usr/share/vdsm/storage/sp.py, line 1448, in getMasterDomain
raise se.StoragePoolMasterNotFound(self.spUUID, msdUUID)
StoragePoolMasterNotFound: Cannot find master domain:
'spUUID=d6e7e8b8-49c7-11e2-a261-000a5e429f63,
msdUUID=028167ee-5168-4742-96c3-020856f500ec'
Thread-8683::DEBUG::2013-03-20
16:17:14,531::task::872::TaskManager.Task::(_run)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::Task._run:
48341c5a-1bd1-42e1-bc60-1a307d4f3704
('d6e7e8b8-49c7-11e2-a261-000a5e429f63', 1,
'd6e7e8b8-49c7-11e2-a261-000a5e429f63',
'028167ee-5168-4742-96c3-020856f500ec', 2) {} failed - stopping task
Thread-8683::DEBUG::2013-03-20
16:17:14,531::task::1199::TaskManager.Task::(stop)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::stopping in state preparing
(force False)
Thread-8683::DEBUG::2013-03-20
16:17:14,532::task::978::TaskManager.Task::(_decref)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::ref 1 aborting True
Thread-8683::INFO::2013-03-20
16:17:14,532::task::1157::TaskManager.Task::(prepare)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::aborting: Task is aborted:
'Cannot find master domain' - code 304
Thread-8683::DEBUG::2013-03-20
16:17:14,532::task::1162::TaskManager.Task::(prepare)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::Prepare: aborted: Cannot find
master domain
Thread-8683::DEBUG::2013-03-20
16:17:14,532::task::978::TaskManager.Task::(_decref)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::ref 0 aborting True
Thread-8683::DEBUG::2013-03-20
16:17:14,532::task::913::TaskManager.Task::(_doAbort)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::Task._doAbort: force False
Thread-8683::DEBUG::2013-03-20
16:17:14,532::resourceManager::844::ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-8683::DEBUG::2013-03-20
16:17:14,533::task::588::TaskManager.Task::(_updateState)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::moving from state preparing -
state aborting
Thread-8683::DEBUG::2013-03-20
16:17:14,533::task::537::TaskManager.Task::(__state_aborting)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::_aborting: recover policy none
Thread-8683::DEBUG::2013-03-20
16:17:14,533::task::588::TaskManager.Task::(_updateState)
Task=`48341c5a-1bd1-42e1-bc60-1a307d4f3704`::moving from state aborting -
state failed
Thread-8683::DEBUG::2013-03-20
16:17:14,533::resourceManager::809::ResourceManager.Owner::(releaseAll)
Owner.releaseAll requests {} resources {}
Thread-8683::DEBUG::2013-03-20
16:17:14,533::resourceManager::844::ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-8683::ERROR::2013-03-20
16:17:14,533::dispatcher::66::Storage.Dispatcher.Protect::(run) {'status':
{'message': Cannot find master domain:
'spUUID=d6e7e8b8-49c7-11e2-a261-000a5e429f63,
msdUUID=028167ee-5168-4742-96c3-020856f500ec', 'code': 304}}
I attach vdsm.log file. It seems as if system is looking for a UUID which
doesn't exist. How can I fix this issue?.
Many thanks in avanced,
Juanjo.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
[Users] Storage problem
I forgot the vdsm.log file, Thanks, Juanjo. vdsm.log Description: Binary data ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [Spice-devel] 3.2 final and status of spice console in ie
Hello Christophe, Jeff and everybody, I will add the engine url to the IE trusted zone and I will do a test. in this moment I have any other issue and when I solve this I will test. Many thanks, Juanjo. On Wed, Mar 20, 2013 at 10:20 AM, Christophe Fergeau cferg...@redhat.comwrote: On Tue, Mar 19, 2013 at 05:11:56PM -0400, Jeff Bailey wrote: On 3/19/2013 11:05 AM, Christophe Fergeau wrote: As far as I know, there haven't been public spicex releases, so I'm not sure where this spicex used with oVirt comes from. I was referring to the log file named spicex related to the activex plugin. Yes, I got that part, but same answer, as far as I know there hasn't been any public releases of the activex plugin ;) Christophe ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] 3.2 final and status of spice console in ie
Hello Itamar and everybody, I have tested this Howto with a Windows 7 Enterprise edition client and IE 9 and when you click over console button in User portal virt-viewer is launched but after one second it close windows and don't connect to virtual machine. I have oVirt 3.1 and I'm thinking in migrate my system to oVirt 3.2 but it will be nice to know which it is the reason because it doesn't work. Some indications about what would be the problem will be wellcome. If it is necessary some log I can provide it. Many thanks, Juanjo. On Fri, Mar 15, 2013 at 10:37 AM, Itamar Heim ih...@redhat.com wrote: On 02/28/2013 01:34 PM, Karli Sjöberg wrote: But to me one question arise, with a Windows clients, XP or 7, any version, it's possible to use the User Portal to be able users lauch the VM console?, or it's mandatory to have Fedora clients with spice-xpi for firefox. It would seem impossible with oVirt-3.1, which is the biggest reason why we cannot take into any real production at the moment:( What good does it do that it works with Fedora when the total of people using it counts to 1(me)? 1. there are wiki's on how to add spice windows support to ovirt: http://wiki.ovirt.org/wiki/How_to_Connect_to_SPICE_Console_With_Portal 2. there are patches for various solutions to this coming (mime based launched, spice.html5, novnc, maybe spice-xpi for firefox windows) HTH, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] 3.2 final and status of spice console in ie
Many thanks, But to me one question arise, with a Windows clients, XP or 7, any version, it's possible to use the User Portal to be able users lauch the VM console?, or it's mandatory to have Fedora clients with spice-xpi for firefox. On the other hand, if Spice consoles in windows clients can't be used for oVirt 3.1, is It possible open VM consoles from Windows clients with VNC? and in affirmative case, is there some how-to similar to Spice how-to? Many thanks in avanced, Juanjo. On Wed, Feb 27, 2013 at 8:39 PM, Jeff Bailey bai...@cs.kent.edu wrote: On 2/27/2013 11:01 AM, Gianluca Cecchi wrote: On Wed, Feb 27, 2013 at 4:48 PM, Juan Jose wrote: Hello Karli, I'm working with a oVirt version 3.1, but I have read that Gianluca have been able to do this console works. Anybody can help us providing some guidance? Many thanks in avanced, Juanjo. keep in mind that I have only used spice console with oVirt version 3.2 final and ie 9 32 bit in the client I've never gotten it to work in IE (3.1 or 3.2) but haven't put lots of effort into finding out why. I get the exact same results (client for a couple of seconds). I believe it's always been with IE 9 and Windows 7/64. __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Thin Provisioning
Many thanks for your information Dafna. Quick Start Guide doesn't explain nothing about this and I have follewed it to create the two VM, Fedora 17 and Windows 7, that I'm using to create Templates and when I have arrived to this part I have found this problem. Now I know what is the procedure Juanjo. On Thu, Feb 21, 2013 at 2:25 PM, Dafna Ron d...@redhat.com wrote: Hi Juan, I see what the issue is and it's actually by design. The template you created has a Preallocated image. in NFS, to make a preallocated image we actually write to the disk to make it preallocated. as you can see, I created a vm with preallocated disk in NFS and if I run DU during the creation of the image you can see the size go up: 2.4G. [root@orion f1a6a2e7-38f1-4a7c-8f3b-efbca664d7aa]# du -h 2.5G. [root@orion f1a6a2e7-38f1-4a7c-8f3b-efbca664d7aa]# du -h 2.6G. [root@orion f1a6a2e7-38f1-4a7c-8f3b-efbca664d7aa]# so in NFS storage, if your template is preallocated you cannot create a thin provision copy vm (distinguishing between the actual data and previously zeroed will be complicated). you can create a snapshot of that image which will be thin provision but it will be linked to the template. or you can create a thin provision template and than create a thin provision vm or preallocated vm. Dafna On 02/21/2013 01:56 PM, Juan Jose wrote: Hello Dafna, I hope that this two screenshots provides this information. On Thu, Feb 21, 2013 at 11:38 AM, Dafna Ron d...@redhat.com mailto:d...@redhat.com wrote: Can you please tell me what disk type you have on the template and send a screen shot of the Resource Allocation tab to the users@ovirt.org mailto:users@ovirt.org list? On 02/21/2013 09:43 AM, Juan Jose wrote: Hello Dafna, Yes, I have already selected the Clone radio button as the Start Guide shows and the Thin Provision doesn't appears. On Wed, Feb 20, 2013 at 5:50 PM, Dafna Ron d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com wrote: ok. so you have 1 NFS data domain which has a template on it and when you are trying to create a new vm you only have preallocated disk type. when you open the new vm dialogue, after you select the template, in the Resource allocation tab you need to select the clone radio button (its near the Template Provisioning). once you do that, the allocation policy scroll will become active and you will be able to select thin or preallocated. let me know if after you select the clone you still only have preallocated. On 02/20/2013 06:09 PM, Juan Jose wrote: Hello Dafna, Are you want to say one NFS domain?, I have one for VM aand one isos. On Wed, Feb 20, 2013 at 4:46 PM, Dafna Ron d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com mailto:d...@redhat.com wrote: do you have more than one domain? On 02/20/2013 05:38 PM, Juan Jose wrote: Hello everybody, I'm following the Quick Start Guide to clone a machine from a Template that it's already created. As thi guide says it's necessary to select in Allocation tab from Resource Allocation, Thin Provision. When I try to do this and down the select field it doesn't appear this option, I only can see Preallocated. I have oVirt engine 3.1. Can somebody give some light why I haven't this option in my webadmin? Many thanks in avanced, Juanjo. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dafna Ron ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org mailto:Users@ovirt.org
Re: [Users] Problem with Win 7 VM creation
Many thanks Jim, Finally doing a interchange of CDs and a refresh qhen you connect Win 7 CD again I have been able to do my Windows 7 installation. I have found the virtio-win driver in this page: https://www.redhat.com/archives/libguestfs/2011-November/msg00094.html, it can help anyboy in the same problem. Juanjo. On Fri, Feb 8, 2013 at 4:54 AM, Jim Kinney jim.kin...@gmail.com wrote: I have a iso image of the drivers in my iso storage. Just change CD and use the driver CD. Be sure to change it back to be the install Cd. The win7 error will look something like Can't install on that disk and it looks like it means the virtual hard drive after the driver installs and it sees the drive. It really means I don't have the install Cd anymore to install from. sigh windows... On Thu, Feb 7, 2013 at 10:31 AM, Juan Jose jj197...@gmail.com wrote: Hello everybody and Antoni, I have changed my NFS server to my engine machine and finally I have had to create a Fedora 17 VM machine in my oVirt system and now I'm trying to create a Win 7 VM machine and when I want to Run once my machine, in Boot options I don't have the virtio-win driver to attach to floppy VM and when machine try to install system in virtual hard disk it ask for a driver for the disk. How can I install this driver and to be attached to my VM floppy? Many thanks in avanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- -- James P. Kinney III * Every time you stop a school, you will have to build a jail. What you gain at one end you lose at the other. It's like feeding a dog on his own tail. It won't fatten the dog. - Speech 11/23/1900 Mark Twain http://electjimkinney.org http://heretothereideas.blogspot.com/ * ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Problem with Win 7 VM creation
Hello Gianluca, Yes, your second link is the same that it is posted in redhat link of my previous message. Many thank for the other. Juanjo. On Fri, Feb 8, 2013 at 1:57 PM, Gianluca Cecchi gianluca.cec...@gmail.comwrote: On Fri, Feb 8, 2013 at 1:46 PM, Juan Jose wrote: Many thanks Jim, Finally doing a interchange of CDs and a refresh qhen you connect Win 7 CD again I have been able to do my Windows 7 installation. I have found the virtio-win driver in this page: https://www.redhat.com/archives/libguestfs/2011-November/msg00094.html, it can help anyboy in the same problem. Juanjo. In theory latest images position is referred also here: http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers (see also the notes section for different windows versions) and normally should be at http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/bin/ that actually is the same link as the one posted by you ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] how to add a user
On Thu, Feb 7, 2013 at 5:30 AM, Yair Zaslavsky yzasl...@redhat.com wrote: Please check if you see errors at logs - /var/log/ovirt-engine/engine-manage-domains.log And let us know what are the errors. As Itamar asked - what is the directory service you are using? (what parameter is passed to -provider option?) Since we use kerberos authentication, there are some configurations that should be taken care of (have SRV records for the domain for both kerberos and ldap - check - dig SRV _ldap._tcp.your.domain.com dig SRV _kerberos._tcp.your.domain.com dig SRV _kerberos._udp.your.domain.com You should also have a PTR record to your directory service machine. You also need to have a time difference between your oVirt engine machine and the directory service machine of no more than +- 5 minutes. Hope this helps out, Yair - Original Message - From: Itamar Heim ih...@redhat.com To: Jonathan Horne jho...@skopos.us Cc: users@ovirt.org Sent: Wednesday, February 6, 2013 8:27:01 PM Subject: Re: [Users] how to add a user On 06/02/2013 19:03, Jonathan Horne wrote: Im using ovrit 3.1, and I'm trying to add a user to the web console. But the new button brings up a popup that doesn't have any buttons on it. Can I use the engine-manage-domains tool, and if yes what is the syntax? So far what I have found on google is just getting me authentication errors, so I'm sure I'm doing it wrong. Thanks, jonathan This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users which type of domain are you trying to add? what is the command line the error? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Problem with Win 7 VM creation
Hello everybody and Antoni, I have changed my NFS server to my engine machine and finally I have had to create a Fedora 17 VM machine in my oVirt system and now I'm trying to create a Win 7 VM machine and when I want to Run once my machine, in Boot options I don't have the virtio-win driver to attach to floppy VM and when machine try to install system in virtual hard disk it ask for a driver for the disk. How can I install this driver and to be attached to my VM floppy? Many thanks in avanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] set host status up from backend?
Hello Jithin, I have had this Job canceled problem when wdsmd service start. I solved this problem deleting the folder /var/lib/vdsm/netconfback. Try this, please. http://lists.ovirt.org/pipermail/users/2012-August/003507.html Bye, Juanjo. On Wed, Feb 6, 2013 at 6:27 AM, Jithin Raju rajuj...@gmail.com wrote: Hi, When I am trying to start vdsmd it looks like vdsmd is stopping network and server goes unreachable. /varl/log/messages: Feb 6 10:37:21 blueberry systemd-vdsmd[13246]: vdsm: libvirt already configured for vdsm [ OK ] Feb 6 10:37:21 blueberry systemd-vdsmd[13246]: Starting iscsid: Feb 6 10:37:21 blueberry systemd-vdsmd[13246]: Starting libvirtd (via systemctl): [ OK ] Feb 6 10:37:21 blueberry systemd-vdsmd[13246]: Stopping network (via systemctl): Thanks, Jithin On Wed, Feb 6, 2013 at 10:19 AM, Jithin Raju rajuj...@gmail.com wrote: Hi Omer, communication looks fine (ping). vdsmd is not runnng. [root@blueberry ~]# service vdsmd status Redirecting to /bin/systemctl status vdsmd.service vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled) Active: inactive (dead) since Wed, 06 Feb 2013 08:40:18 +0530; 1min 52 s ago Process: 10138 ExecStart=/lib/systemd/systemd-vdsmd start (code=killed, signal=TERM) CGroup: name=systemd:/system/vdsmd.service Feb 06 08:40:17 blueberry systemd-vdsmd[10138]: Note: Forwarding request to Feb 06 08:40:17 blueberry systemd-vdsmd[10138]: vdsm: libvirt already config...] Feb 06 08:40:18 blueberry systemd-vdsmd[10138]: Starting iscsid: Feb 06 08:40:18 blueberry systemd-vdsmd[10138]: Starting libvirtd (via syste...] Vdsmd fails to start. [root@blueberry ~]# service vdsmd restart Redirecting to /bin/systemctl restart vdsmd.service Job canceled. Thanks, Jithin On Tue, Feb 5, 2013 at 9:39 PM, Omer Frenkel ofren...@redhat.com wrote: -- *From: *Jithin Raju rajuj...@gmail.com *To: *René Koch (ovido) r.k...@ovido.at *Cc: *users@ovirt.org *Sent: *Tuesday, February 5, 2013 3:27:44 PM *Subject: *Re: [Users] set host status up from backend? Hi Rene, Activate option is grey'ed out. Thanks, Jithin On Tue, Feb 5, 2013 at 6:51 PM, René Koch (ovido) r.k...@ovido.atwrote: Hi, What happens when you try to activate your host? Is there an error message? Regards, René On Tue, 2013-02-05 at 18:45 +0530, Jithin Raju wrote: Hi Karli, I got the below error after trying Host Tab Right click host Confirm 'Host has been rebooted' Error while executing action: Cannot confirm 'Host has been rebooted' Host. There is no active Host in the Data Center. Thanks, Jithin On Tue, Feb 5, 2013 at 6:40 PM, Karli Sjöberg karli.sjob...@slu.se wrote: tis 2013-02-05 klockan 18:32 +0530 skrev Jithin Raju: Hi , Is there a way to set the host status up in ovirt through backend, some value in DB. My server went unreachable for a while and its reachable now, but ovirt web UI still showa it as Non Responsive. if the host is in 'non responsive' status - please check engine can communicate with this host (ping?) and please check vdsm service is running properly there (run on the host: vdsClient 0 getVdsCapabilities ) Host Tab Right click host Confirm 'Host has been rebooted'? /Karli Thanks, Jithin ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Problem with libvirt
Hello everybody,
The command virsh -r net-list output after my error is:
[root@ovirt-host ~]# virsh -r net-list
Name State Autostart
-
vdsm-ovirtmgmt active yes
Can someone suggest what could be my problem?
Many thanks in avanced,
Juanjo.
On Fri, Feb 1, 2013 at 11:26 AM, Antoni Segura Puimedon asegu...@redhat.com
wrote:
Hola,
Could you make some pastebins with the contents of the files
/etc/sysconfig/network-scripts/ifcfg* ?
Also, virsh -r net-list and the log generated on the process
of losing the connection when creating a guest.
Best,
Toni
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Moti Asayag masa...@redhat.com
Cc: users@ovirt.org
Sent: Friday, February 1, 2013 10:57:08 AM
Subject: Re: [Users] Problem with libvirt
Hello Monti and Dafna,
The host have connectivity with the engine until I try to install a
VM and in the middle of the process host loses the connectivity. I
can see that it is a connection problem. How can I check if the host
address is the same as I used to add it to my data-center?, I made
an IP address change in the host but I delete it from engine and
after change its address I re-added.
On the other hand, I would like to know if my network configuration
is correct because when I execute the ipconfig command in host
console I can see the interfaces bond0 to bond4, em1 interface,
localhost and ovirtmgmt with the host IP. Is it that correct?
Many thanks in avanced,
Juanjo.
On Thu, Jan 31, 2013 at 3:04 PM, Moti Asayag masa...@redhat.com
wrote:
On 01/31/2013 03:37 PM, Juan Jose wrote:
Hello Moti,
The execution of this command in the host is:
This indicates VDSM is up and running correctly, but the ovirt-engine
can't reach it.
Can you check the connectivity from the ovirt-engine to the host (use
the same address as used to add it to data-center) ?
Maybe there are iptables issues preventing establishing connection
from
the engine to the host.
[root@ovirt-host ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:69e9aaf7e4c'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:69e9aaf7e4c
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr':
'',
'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu':
'1500',
'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'},
'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {},
'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,lahf_lm,dtherm,tpr_shadow,vnmi,flexpriority,model_coreduo,model_Conroe
cpuModel = Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
cpuSockets = 1
cpuSpeed = 1999.000
emulatedMachines = ['pc-0.15', 'pc-1.0', 'pc', 'pc-0.14',
'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.15', 'pc-1.0',
'pc',
'pc-0.14', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = xxx.xxx.xxx.91
lastClientIface = ovirtmgmt
management_ip =
memSize = 7701
netConfigDirty = False
networks = {'ovirtmgmt': {'addr': '158.109.202.67', 'cfg':
{'DELAY':
'0', 'IPV6INIT': 'no', 'UUID':
'3cbac056-822a-43e9-a4ec-df5324becd79',
'DEFROUTE': 'yes', 'DNS1': 'xxx.xxx.xxx.1', 'IPADDR':
'xxx.xxx.xxx.67',
'ONBOOT': 'yes', 'IPV4_FAILURE_FATAL': 'no', 'BROADCAST':
'xxx.xxx.xxx.255', 'NM_CONTROLLED': 'no', 'NETMASK':
'xxx.xxx.xxx.0',
'BOOTPROTO': 'none', 'DNS2': 'xxx.xxx.xxx.9', 'DEVICE':
'ovirtmgmt',
'TYPE': 'Bridge', 'GATEWAY': 'xxx.xxx.xxx.1', 'NETWORK':
'xxx.xxx.xxx.0'}, 'mtu': '1500', 'netmask': '255.255.254.0', 'stp':
'off', 'bridged': True, 'gateway': 'xxx.xxx.xxx.1', 'ports':
['em1']}}
nics = {'em1': {'hwaddr': '00:19:99:35:cc:54', 'netmask': '',
'speed':
1000, 'addr': '', 'mtu': '1500'}}
operatingSystem = {'release': '1', 'version': '17', 'name':
'Fedora'}
packages2 = {'kernel': {'release': '1.fc17.x86_64', 'buildtime':
1350912755.0, 'version': '3.6.3'}, 'spice-server': {'release':
'5.fc17',
'buildtime': '1336983054', 'version': '0.10.1'}, 'vdsm':
{'release':
'10.fc17', 'buildtime': '1349383616', 'version': '4.10.0'},
'qemu-kvm':
{'release': '2.fc17
Re: [Users] Problem with libvirt
More information,
I attach the messages in the moment that error with VM installation occur.
Juanjo.
On Fri, Feb 1, 2013 at 11:26 AM, Antoni Segura Puimedon asegu...@redhat.com
wrote:
Hola,
Could you make some pastebins with the contents of the files
/etc/sysconfig/network-scripts/ifcfg* ?
Also, virsh -r net-list and the log generated on the process
of losing the connection when creating a guest.
Best,
Toni
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Moti Asayag masa...@redhat.com
Cc: users@ovirt.org
Sent: Friday, February 1, 2013 10:57:08 AM
Subject: Re: [Users] Problem with libvirt
Hello Monti and Dafna,
The host have connectivity with the engine until I try to install a
VM and in the middle of the process host loses the connectivity. I
can see that it is a connection problem. How can I check if the host
address is the same as I used to add it to my data-center?, I made
an IP address change in the host but I delete it from engine and
after change its address I re-added.
On the other hand, I would like to know if my network configuration
is correct because when I execute the ipconfig command in host
console I can see the interfaces bond0 to bond4, em1 interface,
localhost and ovirtmgmt with the host IP. Is it that correct?
Many thanks in avanced,
Juanjo.
On Thu, Jan 31, 2013 at 3:04 PM, Moti Asayag masa...@redhat.com
wrote:
On 01/31/2013 03:37 PM, Juan Jose wrote:
Hello Moti,
The execution of this command in the host is:
This indicates VDSM is up and running correctly, but the ovirt-engine
can't reach it.
Can you check the connectivity from the ovirt-engine to the host (use
the same address as used to add it to data-center) ?
Maybe there are iptables issues preventing establishing connection
from
the engine to the host.
[root@ovirt-host ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:69e9aaf7e4c'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:69e9aaf7e4c
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr':
'',
'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu':
'1500',
'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'},
'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {},
'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,lahf_lm,dtherm,tpr_shadow,vnmi,flexpriority,model_coreduo,model_Conroe
cpuModel = Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
cpuSockets = 1
cpuSpeed = 1999.000
emulatedMachines = ['pc-0.15', 'pc-1.0', 'pc', 'pc-0.14',
'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.15', 'pc-1.0',
'pc',
'pc-0.14', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = xxx.xxx.xxx.91
lastClientIface = ovirtmgmt
management_ip =
memSize = 7701
netConfigDirty = False
networks = {'ovirtmgmt': {'addr': '158.109.202.67', 'cfg':
{'DELAY':
'0', 'IPV6INIT': 'no', 'UUID':
'3cbac056-822a-43e9-a4ec-df5324becd79',
'DEFROUTE': 'yes', 'DNS1': 'xxx.xxx.xxx.1', 'IPADDR':
'xxx.xxx.xxx.67',
'ONBOOT': 'yes', 'IPV4_FAILURE_FATAL': 'no', 'BROADCAST':
'xxx.xxx.xxx.255', 'NM_CONTROLLED': 'no', 'NETMASK':
'xxx.xxx.xxx.0',
'BOOTPROTO': 'none', 'DNS2': 'xxx.xxx.xxx.9', 'DEVICE':
'ovirtmgmt',
'TYPE': 'Bridge', 'GATEWAY': 'xxx.xxx.xxx.1', 'NETWORK':
'xxx.xxx.xxx.0'}, 'mtu': '1500', 'netmask': '255.255.254.0', 'stp':
'off', 'bridged': True, 'gateway': 'xxx.xxx.xxx.1', 'ports':
['em1']}}
nics = {'em1': {'hwaddr': '00:19:99:35:cc:54', 'netmask': '',
'speed':
1000, 'addr': '', 'mtu': '1500'}}
operatingSystem = {'release': '1', 'version': '17', 'name':
'Fedora'}
packages2 = {'kernel': {'release': '1.fc17.x86_64', 'buildtime':
1350912755.0, 'version': '3.6.3'}, 'spice-server': {'release':
'5.fc17',
'buildtime': '1336983054', 'version': '0.10.1'}, 'vdsm':
{'release':
'10.fc17', 'buildtime': '1349383616', 'version': '4.10.0'},
'qemu-kvm':
{'release': '2.fc17', 'buildtime': '1349642820', 'version':
'1.0.1'},
'libvirt': {'release': '2.fc17', 'buildtime': '1355687905',
'version':
'0.9.11.8'}, 'qemu-img': {'release': '2.fc17', 'buildtime':
'1349642820', 'version
Re: [Users] Problem with libvirt
Hello Antonio,
Could you indicate to me how I can connect to this #vdsm irc channel,
please?, I have seen in the ovirt page, community, IRC, but it doesn't
explain anything about how to connect. I have the ircII client in my Debian
box but I guess that it is necessary the host and port number. Is it
possible that host was irc.freenode.net?, and what is the port number and
the user to connect?
Thanks,
Juanjo.
On Mon, Feb 4, 2013 at 4:42 PM, Antoni Segura Puimedon
asegu...@redhat.comwrote:
Juanjo,
I'll look at it in the evening. If I don't find anything, maybe you
can connect to the #vdsm irc channel at freenode tomorrow.
Best
Toni
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: users@ovirt.org
Sent: Monday, February 4, 2013 4:27:04 PM
Subject: Re: [Users] Problem with libvirt
More information,
I attach the messages in the moment that error with VM installation
occur.
Juanjo.
On Fri, Feb 1, 2013 at 11:26 AM, Antoni Segura Puimedon
asegu...@redhat.com wrote:
Hola,
Could you make some pastebins with the contents of the files
/etc/sysconfig/network-scripts/ifcfg* ?
Also, virsh -r net-list and the log generated on the process
of losing the connection when creating a guest.
Best,
Toni
- Original Message -
From: Juan Jose jj197...@gmail.com
To: Moti Asayag masa...@redhat.com
Cc: users@ovirt.org
Sent: Friday, February 1, 2013 10:57:08 AM
Subject: Re: [Users] Problem with libvirt
Hello Monti and Dafna,
The host have connectivity with the engine until I try to install a
VM and in the middle of the process host loses the connectivity. I
can see that it is a connection problem. How can I check if the
host
address is the same as I used to add it to my data-center?, I made
an IP address change in the host but I delete it from engine and
after change its address I re-added.
On the other hand, I would like to know if my network configuration
is correct because when I execute the ipconfig command in host
console I can see the interfaces bond0 to bond4, em1 interface,
localhost and ovirtmgmt with the host IP. Is it that correct?
Many thanks in avanced,
Juanjo.
On Thu, Jan 31, 2013 at 3:04 PM, Moti Asayag masa...@redhat.com
wrote:
On 01/31/2013 03:37 PM, Juan Jose wrote:
Hello Moti,
The execution of this command in the host is:
This indicates VDSM is up and running correctly, but the
ovirt-engine
can't reach it.
Can you check the connectivity from the ovirt-engine to the host
(use
the same address as used to add it to data-center) ?
Maybe there are iptables issues preventing establishing connection
from
the engine to the host.
[root@ovirt-host ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:69e9aaf7e4c'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:69e9aaf7e4c
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0':
{'addr':
'',
'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu':
'1500',
'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'},
'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves':
[],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {},
'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,lahf_lm,dtherm,tpr_shadow,vnmi,flexpriority,model_coreduo,model_Conroe
cpuModel = Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
cpuSockets = 1
cpuSpeed = 1999.000
emulatedMachines = ['pc-0.15', 'pc-1.0', 'pc', 'pc-0.14',
'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.15', 'pc-1.0',
'pc',
'pc-0.14', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = xxx.xxx.xxx.91
lastClientIface = ovirtmgmt
management_ip =
memSize = 7701
netConfigDirty = False
networks = {'ovirtmgmt': {'addr': '158.109.202.67', 'cfg':
{'DELAY':
'0', 'IPV6INIT': 'no', 'UUID':
'3cbac056-822a-43e9-a4ec-df5324becd79',
'DEFROUTE': 'yes', 'DNS1': 'xxx.xxx.xxx.1', 'IPADDR':
'xxx.xxx.xxx.67',
'ONBOOT': 'yes', 'IPV4_FAILURE_FATAL': 'no', 'BROADCAST':
'xxx.xxx.xxx.255', 'NM_CONTROLLED
Re: [Users] Problem with libvirt
Hello Moti,
The execution of this command in the host is:
[root@ovirt-host ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:69e9aaf7e4c'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:69e9aaf7e4c
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '',
'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg':
{}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,lahf_lm,dtherm,tpr_shadow,vnmi,flexpriority,model_coreduo,model_Conroe
cpuModel = Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz
cpuSockets = 1
cpuSpeed = 1999.000
emulatedMachines = ['pc-0.15', 'pc-1.0', 'pc', 'pc-0.14', 'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.15', 'pc-1.0', 'pc',
'pc-0.14', 'pc-0.13', 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = xxx.xxx.xxx.91
lastClientIface = ovirtmgmt
management_ip =
memSize = 7701
netConfigDirty = False
networks = {'ovirtmgmt': {'addr': '158.109.202.67', 'cfg': {'DELAY': '0',
'IPV6INIT': 'no', 'UUID': '3cbac056-822a-43e9-a4ec-df5324becd79',
'DEFROUTE': 'yes', 'DNS1': 'xxx.xxx.xxx.1', 'IPADDR': 'xxx.xxx.xxx.67',
'ONBOOT': 'yes', 'IPV4_FAILURE_FATAL': 'no', 'BROADCAST':
'xxx.xxx.xxx.255', 'NM_CONTROLLED': 'no', 'NETMASK': 'xxx.xxx.xxx.0',
'BOOTPROTO': 'none', 'DNS2': 'xxx.xxx.xxx.9', 'DEVICE': 'ovirtmgmt',
'TYPE': 'Bridge', 'GATEWAY': 'xxx.xxx.xxx.1', 'NETWORK': 'xxx.xxx.xxx.0'},
'mtu': '1500', 'netmask': '255.255.254.0', 'stp': 'off', 'bridged': True,
'gateway': 'xxx.xxx.xxx.1', 'ports': ['em1']}}
nics = {'em1': {'hwaddr': '00:19:99:35:cc:54', 'netmask': '', 'speed':
1000, 'addr': '', 'mtu': '1500'}}
operatingSystem = {'release': '1', 'version': '17', 'name': 'Fedora'}
packages2 = {'kernel': {'release': '1.fc17.x86_64', 'buildtime':
1350912755.0, 'version': '3.6.3'}, 'spice-server': {'release': '5.fc17',
'buildtime': '1336983054', 'version': '0.10.1'}, 'vdsm': {'release':
'10.fc17', 'buildtime': '1349383616', 'version': '4.10.0'}, 'qemu-kvm':
{'release': '2.fc17', 'buildtime': '1349642820', 'version': '1.0.1'},
'libvirt': {'release': '2.fc17', 'buildtime': '1355687905', 'version':
'0.9.11.8'}, 'qemu-img': {'release': '2.fc17', 'buildtime': '1349642820',
'version': '1.0.1'}}
reservedMem = 321
software_revision = 10
software_version = 4.10
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0', '3.1']
uuid = 36303030-3139-3236-3800-00199935CC54_00:19:99:35:cc:54
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
[root@ovirt-host ~]#
I can't execute this command in my engine because command vdsClient is
not installed.
Many thanks in avanced,
Juanjo.
On Thu, Jan 31, 2013 at 2:06 PM, Moti Asayag masa...@redhat.com wrote:
On 01/31/2013 02:26 PM, Dafna Ron wrote:
non responsive state for host means that you either have a network issue
(iptables perhaps) or vdsmd is down.
please attach vdsm and libvirtd logs.
By looking the engine.log below there are network issues:
2013-01-31 11:49:54,121 ERROR
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(QuartzScheduler_Worker-73) [73213e4f] vds::refreshVdsStats Failed
getVdsStats, vds = 7d3491e8-49ce-11e2-8b2e-000a5e429f63 : host1, error
= VDSNetworkException: VDSNetworkException:
Can you reach the host from the ovirt-engine server ? or can you check
that vdsm service runs on the host by invoking:
vdsClient -s 0 getVdsCaps
On 01/31/2013 01:21 PM, Juan Jose wrote:
Hello everybody,
I have installed and configured oVirt 3.1 engine in a Fedora 17 with a
Fedora 17 node connected. Ihave defined a NFS domain for my VM and
another for ISOs. I try to start a Fedora 17 Server with Run once and
the machi start without problems, after that I preceed with the
installation in its wirtual disk but when I arrive to define
partitions in the virtual disk the machine is freeze and I start to
receive engine errors and the default data center go in non responsive
status.
I can see this messages in /var/log/ovirt-engine/engine.log, which I
attach to this message:
2013-01-31 11:43:23,957 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(QuartzScheduler_Worker-47) [75664f2b] Recieved a Device without an
address when processing VM da09284e-3189-428b-a879-6201f7a5ca87
[Users] Error run once VM
Hello everybody,
I'm following the
http://www.ovirt.org/Quick_Start_Guide#Create_a_Fedora_Virtual_Machine; and
when I click OK buttom after put all parameters in Run Virtual Machine, I
receive bellow error in events and in vdsm.log file from my host:
*Thread-352921::DEBUG::2013-01-21
15:55:40,709::task::978::TaskManager.Task::(_decref)
Task=`8bb281a1-434b-4506-b4a8-2d6665bb382f`::ref 0 aborting
FalseThread-352921::INFO::2013-01-21
15:55:40,709::clientIF::274::vds::(prepareVolumePath) prepared volume
path:
/rhev/data-center/d6e7e8b8-49c7-11e2-a261-000a5e429f63/57d184a0-908b-49b5-926f-cd413b9e6526/images/c77ff9d7-6280-4454-b342-faa206989d2a/bf973de9-d344-455d-a628-3dbfbf2693d9Thread-352921::DEBUG::2013-01-21
15:55:40,717::libvirtvm::1338::vm.Vm::(_run)
vmId=`51738dae-c758-4e77-bad7-281f56c4d61d`::?xml version=1.0
encoding=utf-8?domain
type=kvm nameFedora17/name
uuid51738dae-c758-4e77-bad7-281f56c4d61d/uuid
memory1048576/memorycurrentMemory1048576/currentMemory
vcpu1/vcpu devices channel
type=unixtarget name=com.redhat.rhevm.vdsm
type=virtio/ source mode=bind
path=/var/lib/libvirt/qemu/channels/Fedora17.com.redhat.rhevm.vdsm/
/channel input
bus=ps2 type=mouse/channel type=spicevmc
target
name=com.redhat.spice.0 type=virtio/ /channel
graphics
autoport=yes keymap=en-us listen=0 passwd=*
passwdValidTo=1970-01-01T00:00:01 port=-1 tlsPort=-1
type=spice channel mode=secure name=main/
channel
mode=secure name=inputs/ channel mode=secure
name=cursor/ channel mode=secure name=playback/
channel
mode=secure name=record/ channel mode=secure
name=display//graphics console type=pty
target port=0
type=virtio/ /console video model
heads=1 type=qxl
vram=65536/ /videointerface type=bridge
mac
address=00:1a:4a:6d:ca:00/ model type=virtio/
source
bridge=ovirtmgmt/boot order=3/
/interfacememballoon
model=virtio/disk device=cdrom snapshot=no
type=filesource
file=/rhev/data-center/d6e7e8b8-49c7-11e2-a261-000a5e429f63/cd9b45e6-2150-44d9-af1a-a557840fde9e/images/----/Fedora-17-x86_64-Live-XFCE.iso
startupPolicy=optional/ target bus=ide
dev=hdc/ readonly/
serial/serial boot
order=1/ /disk disk device=disk snapshot=no
type=filesource
file=/rhev/data-center/d6e7e8b8-49c7-11e2-a261-000a5e429f63/57d184a0-908b-49b5-926f-cd413b9e6526/images/c77ff9d7-6280-4454-b342-faa206989d2a/bf973de9-d344-455d-a628-3dbfbf2693d9/
target
bus=virtio dev=vda/
serialc77ff9d7-6280-4454-b342-faa206989d2a/serial boot
order=2/ driver cache=none error_policy=stop
io=threads
name=qemu type=raw//disk /devices os
type arch=x86_64
machine=pc-0.14hvm/typesmbios mode=sysinfo//os
sysinfo
type=smbios systementry
name=manufacturerRed
Hat/entry entry name=productRHEV Hypervisor/entry
entry
name=version17-1/entry entry
name=serial36303030-3139-3236-3800-00199935CC54_00:19:99:35:cc:54/entry
entry
name=uuid51738dae-c758-4e77-bad7-281f56c4d61d/entry
/system /sysinfo clock
adjustment=0 offset=variable timer name=rtc
tickpolicy=catchup/ /clockfeatures acpi/
/features cpu
match=exact modelConroe/model topology cores=1
sockets=1
threads=1/ /cpu/domain
Thread-352921::DEBUG::2013-01-21
15:55:41,258::vm::580::vm.Vm::(_startUnderlyingVm)
vmId=`51738dae-c758-4e77-bad7-281f56c4d61d`::_ongoingCreations
releasedThread-352921::ERROR::2013-01-21
15:55:41,259::vm::604::vm.Vm::(_startUnderlyingVm)
vmId=`51738dae-c758-4e77-bad7-281f56c4d61d`::The vm start process
failedTraceback (most recent call last):
File /usr/share/vdsm/vm.py, line 570, in _startUnderlyingVm
self._run()
File /usr/share/vdsm/libvirtvm.py, line 1364, in _run
self._connection.createXML(domxml, flags),
File /usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py,
line 82, in wrapper
ret = f(*args, **kwargs)
File /usr/lib64/python2.7/site-packages/libvirt.py, line 2420, in createXML
if ret is None:raise libvirtError('virDomainCreateXML() failed',
conn=self)libvirtError: internal error Failed to open socket to
sanlock daemon: No such file or
directoryThread-352921::DEBUG::2013-01-21
[Users] egine-iso-uploader error
Hello everybody, I have been able to solve my NFS problems and now I have configured ISO resource and a data resource in datacenter but when I try to execute the command engine-iso-uploader I can see below error: [root@ovirt-engine ~]# engine-iso-uploader -v list Please provide the REST API password for the admin@internal oVirt Engine user (CTRL+D to abort): ERROR: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. INFO: Use the -h option to see usage. DEBUG: Configuration: DEBUG: command: list DEBUG: Traceback (most recent call last): DEBUG: File /bin/engine-iso-uploader, line 931, in module DEBUG: isoup = ISOUploader(conf) DEBUG: File /bin/engine-iso-uploader, line 331, in __init__ DEBUG: self.list_all_ISO_storage_domains() DEBUG: File /bin/engine-iso-uploader, line 381, in list_all_ISO_storage_domains DEBUG: if not self._initialize_api(): DEBUG: File /bin/engine-iso-uploader, line 358, in _initialize_api DEBUG: password=self.configuration.get(passwd)) DEBUG: File /usr/lib/python2.7/site-packages/ovirtsdk/api.py, line 78, in __init__ DEBUG: debug=debug DEBUG: File /usr/lib/python2.7/site-packages/ovirtsdk/infrastructure/connectionspool.py, line 47, in __init__ DEBUG: debug=debug)) DEBUG: File /usr/lib/python2.7/site-packages/ovirtsdk/web/connection.py, line 38, in __init__ DEBUG: timeout=timeout) DEBUG: File /usr/lib/python2.7/site-packages/ovirtsdk/web/connection.py, line 102, in __createConnection DEBUG: raise NoCertificatesError DEBUG: NoCertificatesError: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. I have one Fedora 17 oVirt engine 3.1 installed with a Fedora 17 host. Someone can show me what is the problem and how is it solved, please? Many thanks in avanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] engine-iso-uploader problem
Hello everybody, I have soveld the problem downgrade engine-iso-uploader package. I hope It can be useful to someone with same problem: http://comments.gmane.org/gmane.comp.emulators.ovirt.user/4389 Many thanks, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] About ISOs
Hello everybody again, I have uploaded two isos to my ISO domain but I have had problems uploading one of they. How do I delete this iso from datacenter and system?, is there some utililty to do this, or some procedure? Many thanks in avanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
