Re: [ovirt-users] Events not updated in Dashboard after clearing

[Peter Michael Calum]

Hi

I see this morning, now events are cleared.
I must happen with long intervals between updates..

Thanks
Peter

Fra: Peter Michael Calum
Sendt: 30. november 2016 20:23
Til: Users@ovirt.org
Emne: Events not updated in Dashboard after clearing

Hi,

I had a fault which gave 1000's of events.

After the fault was solved I cleared all events in Events tap, and they 
disappeared.

But the Dashboard still shows the alarms.

Are there some way to update the dashboard ?

SW - oVirt Engine Version: 4.0.5.5-1.el7.centos


Kind regards
Peter Calum


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Failed to delete snapshot '' for VM

[Peter Michael Calum]

Hi,

Upgrade to  oVirt Engine Version: 4.0.5.5-1.el7.centos solved this problem.

Thank you so much for your help.

Rgds,
Peter

Fra: Yaniv Dary [mailto:yd...@redhat.com]
Sendt: 30. november 2016 12:29
Til: Peter Michael Calum <pe...@tdc.dk>
Cc: Users@ovirt.org
Emne: Re: [ovirt-users] Failed to delete snapshot '' for VM

Can you please upgrade to a newer version. I believe this was already fixed.


Yaniv Dary

Technical Product Manager

Red Hat Israel Ltd.

34 Jerusalem Road

Building A, 4th floor

Ra'anana, Israel 4350109



Tel : +972 (9) 7692306

8272306

Email: yd...@redhat.com<mailto:yd...@redhat.com>

IRC : ydary

On Mon, Nov 28, 2016 at 10:21 PM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi

I am getting theese events every minute, any idea ?

Failed to delete snapshot '' for VM ‘khk9dsw16’

I have tried :
Restarting VM
Set the host to maintenaince an activated again
Restarted ovirt-engine on Manager

SW : oVirt Engine Version: 4.0.1.1-1.el7.centos


Thanks,
Kind regards
Peter Calum


___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Events not updated in Dashboard after clearing

[Peter Michael Calum]

Hi,

I had a fault which gave 1000's of events.

After the fault was solved I cleared all events in Events tap, and they 
disappeared.

But the Dashboard still shows the alarms.

Are there some way to update the dashboard ?

SW - oVirt Engine Version: 4.0.5.5-1.el7.centos


Kind regards
Peter Calum


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Failed to delete snapshot for VM

[Peter Michael Calum]

Hi

I am getting theese events every minute, any ideas ?

Failed to delete snapshot '' for VM 'khk9dsw16'

I have tried :
Restarting VM
Set the host to maintenaince an activated again
Restarted ovirt-engine on Manager

SW : oVirt Engine Version: 4.0.1.1-1.el7.centos


Thanks, 
Kind regards 
Peter Calum 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Failed to delete snapshot '' for VM

[Peter Michael Calum]

Hi

I am getting theese events every minute, any idea ?

Failed to delete snapshot '' for VM 'khk9dsw16'

I have tried :
Restarting VM
Set the host to maintenaince an activated again
Restarted ovirt-engine on Manager

SW : oVirt Engine Version: 4.0.1.1-1.el7.centos


Thanks,
Kind regards
Peter Calum

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Is it is possible to edit the list of Operating Systems for a VM ?

[Peter Michael Calum]

Hi

I mean editing ‘Operating system’ drop down list, when you create New VM.
OK to do it via Database or Conf file.

Thanks
Peter

Fra: Yanir Quinn [mailto:yqu...@redhat.com]
Sendt: 31. juli 2016 12:17
Til: Peter Michael Calum <pe...@tdc.dk>
Cc: users@ovirt.org
Emne: Re: [ovirt-users] Is it is possible to edit the list of Operating Systems 
for a VM ?

Hi,
What are you aiming for ?  having a filtered list in UI for a vm ?  add a 
non-existing OS to the list ?
Regards
Yanir Quinn

On Fri, Jul 29, 2016 at 12:00 PM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi,

Does anyone know if it is possible to edit the list of Operating Systems for a 
VM.
- I'd like it to, for example, "Centos Linux 6.x x64" or "Fedora xx" in this 
list.

Kind regards
Peter Calum

___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Trunk port for a guest nic?

[Peter Michael Calum]

Hi,

In my setup all VM’s runs on separate Vlans.

On hypervisors I have :

nic0 / nic1 : bond0 – ovirtmgmt + storage (nic0 / nic1 is access ports in 
vlanxxx) 10G network
nic2 / nic3 : bond1 – Trunk ports with vlan1,2,3,4..n  - 1G network

In logical networks in manager I define all vlan1,2,3,4..n with vlan tag

In VM I connect nics to Vlan(s) from the logical networks.

Br,
Peter


Fra: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] På vegne af 
Edward Haas
Sendt: 31. juli 2016 20:42
Til: Dan Lavu 
Cc: users 
Emne: Re: [ovirt-users] Trunk port for a guest nic?



On Thu, Jul 28, 2016 at 3:23 PM, Dan Lavu 
> wrote:
Sorry Edy, I totally missed this email.
So, if my hypervisor I have 4 NICs,
0 ovirtmgmt (untagged vlan71)
1/2 bonded, trunk vlan 70,72-80
4 unplugged
So i just create a trunk network, no tags and connect it to the bonded 
interface? Then attach it to my guest?

Yes.
When you do not define a vlan on the ovirt network, it means that everything 
passes to it, tagged and non tagged.
When you connect the guest to that network, it will just pass all packets as is 
(you will need to define the vlans in your guest to strip the tagging).
I would start with one VLAN on the host, just to see that it works and then 
proceed with the others. You may need to define macspoofing to allow multiple
mac addresses to exit the same VM.

Cheers,
Dan

On Fri, Jul 15, 2016 at 3:30 PM, Edward Haas 
> wrote:


On Wed, Jul 13, 2016 at 11:40 PM, Dan Lavu 
> wrote:
Hello,

I remember reading some posts about this in the past, but I don't know if 
anything came of it. Is this now possible? If so, does anybody have any 
documentation on how to do this in 4.0?
Thanks,
Dan


Hello Dan,
If you mean allowing a VM to communicate on multiple vlan/s, then attaching a 
VM to a non-vlan network should do the job.
You just need to define a trunk in the VM.

Thanks,
Edy.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Is it is possible to edit the list of Operating Systems for a VM ?

[Peter Michael Calum]

Hi Yaniv

I searched but haven’t found any OS info files.
Do you have a more specific name to search for ?

I thought this list maybe was in the database ?

Thanks,
Peter

Fra: Yaniv Dary [mailto:yd...@redhat.com]
Sendt: 31. juli 2016 18:29
Til: Roy Golan <rgo...@redhat.com>
Cc: Yanir Quinn <yqu...@redhat.com>; Peter Michael Calum <pe...@tdc.dk>; 
users@ovirt.org
Emne: Re: [ovirt-users] Is it is possible to edit the list of Operating Systems 
for a VM ?

This should be possible via OS info conf files in the engine.


Yaniv Dary

Technical Product Manager

Red Hat Israel Ltd.

34 Jerusalem Road

Building A, 4th floor

Ra'anana, Israel 4350109



Tel : +972 (9) 7692306

8272306

Email: yd...@redhat.com<mailto:yd...@redhat.com>

IRC : ydary

On Sun, Jul 31, 2016 at 1:17 PM, Yanir Quinn 
<yqu...@redhat.com<mailto:yqu...@redhat.com>> wrote:
Hi,
What are you aiming for ?  having a filtered list in UI for a vm ?  add a 
non-existing OS to the list ?
Regards
Yanir Quinn


On Fri, Jul 29, 2016 at 12:00 PM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi,

Does anyone know if it is possible to edit the list of Operating Systems for a 
VM.
- I'd like it to, for example, "Centos Linux 6.x x64" or "Fedora xx" in this 
list.

Kind regards
Peter Calum

___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Is it is possible to edit the list of Operating Systems for a VM ?

[Peter Michael Calum]

Hi,

Does anyone know if it is possible to edit the list of Operating Systems for a 
VM. 
- I'd like it to, for example, "Centos Linux 6.x x64" or "Fedora xx" in this 
list.

Kind regards 
Peter Calum 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

[Peter Michael Calum]

Hi Martin

I see no firewall issues.

I have made some more tests :

RHEV  3.6 host khk9dsk30  test to khk9dsk34 & khk9dsk35 - OK
RHEV  3.6 host khk9dsk31  test to khk9dsk34 & khk9dsk35 - OK
RHEV  3.5 host khk9dsk32  test to khk9dsk34 & khk9dsk35 - OK
RHEV  3.5 host khk9dsk33  test to khk9dsk34 & khk9dsk35 – OK
OVIRT 4.01 host khk9dsk34  test to khk9dsk34 & khk9dsk35 – FAIL
OVIRT 4.01 host khk9dsk35  test to khk9dsk34 & khk9dsk35 – FAIL
OVIRT 4.01 host khk9dsk34  test to khk9dsk30 & khk9dsk31 – FAIL

Could you check in the code  that ipmilan sends on port udp 623 ?

All hosts are on same VLAN
[root@khk9dsk31 ~]# fence_ipmilan -a khk9dsk35-mgnt.ip.tdk.dk -l mgntuser –p 
 -o status
Status: ON
[root@khk9dsk31 ~]# fence_ipmilan -a khk9dsk34-mgnt.ip.tdk.dk -l mgntuser -p 
 -o status
Status: ON
[root@khk9dsk35 ~]# fence_ipmilan -a khk9dsk33-mgnt.ip.tdk.dk -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

[root@khk9dsk35 ~]# fence_ipmilan -a khk9dsk30-mgnt.ip.tdk.dk -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

[root@khk9dsk35 ~]# fence_ipmilan -a khk9dsk34-mgnt.ip.tdk.dk -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

[root@khk9dsk35 ~]# fence_ipmilan -a khk9dsk35-mgnt.ip.tdk.dk -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

Br,
Peter Calum
Fra: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] På vegne af Peter 
Michael Calum
Sendt: 27. juli 2016 21:30
Til: Martin Perina <mper...@redhat.com>
Cc: users@ovirt.org
Emne: [Phish] - Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hi Martin
I was wondering if this could be a firewall problem. We have recently 
introduced new fw rules, and I have not tested fencing on the 2 hypervisors 
before I switched them to ovirt 4, but there was no alarm in the old setup 
before I switched. - I will investigate this further to be sure, and will 
return.
Thanks for your help
/Peter


Fra: Martin Perina [mailto:mper...@redhat.com]
Sendt: 27. juli 2016 20:19
Til: Peter Michael Calum <pe...@tdc.dk<mailto:pe...@tdc.dk>>
Cc: users@ovirt.org<mailto:users@ovirt.org>; Eli Mesika 
<emes...@redhat.com<mailto:emes...@redhat.com>>
Emne: Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hmm, it's really strange that this is working on 3.6 and not on 4.0, I don't 
see any obvious error, so we need to find out what are correct parameters for 
your fencing device.
The easiest way is to execute fence_ipmilan, according to vdsm.log following 
are your current options:
fence_ipmilan -a khk9dsk35-mgnt.ip.tdk.dk<http://khk9dsk35-mgnt.ip.tdk.dk> -l 
mgntuser -p  -o status
Does the above works if it's execute from 
khk9dsk34-mgnt.ip.tdk.dk<http://khk9dsk34-mgnt.ip.tdk.dk>? Btw is username 
correct? Shouldn't be there 'mgmtuser'?
If all of above is correct and you are still not able to get power status, here 
are options you could try:
-v
--lanplus
-4
Martin Perina

On Wed, Jul 27, 2016 at 5:07 PM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi,

Thank you for answering.

Here is the logs, one from each node.
I see the test from khk9dsk34 goes over khk9dsk35 and vice versa.

Same setup as on my redhat 3.6 setup, and no custom options.

Thanks
Peter


Fra: Martin Perina [mailto:mper...@redhat.com<mailto:mper...@redhat.com>]
Sendt: 27. juli 2016 11:56
Til: Peter Michael Calum <pe...@tdc.dk<mailto:pe...@tdc.dk>>
Cc: users@ovirt.org<http://ovirt.org>; Eli Mesika 
<emes...@redhat.com<mailto:emes...@redhat.com>>
Emne: Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hi Peter,
could you please share with us vdsm.log from the host that was used as fence 
proxy (the one that actually executed fence_ipmi agent)?
Also could you please check that fence agent options are the same as on 3.6 
setup? Do you any any custom options for this specific agent?
Thanks
Martin

On Wed, Jul 27, 2016 at 8:34 AM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi
I’m testing on Ovirt 4.01 and got errors when testing fencing on the hosts
I use IBM x3550M4 as host and ipmilan as fence agent.

I get this error when testing.
 [Failed: Unable to obtain correct plug status or plug is not available, , ]

I also have a 3.6 setup and there it works.

Ovirt Node 4.02
oVirt Engine Version: 4.0.1.1-1.el7.centos

Is this list the correct way to report errors ?

Venlig hilsen / Kind regards
Peter Calum
TDC, Denmark


___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1 (SOLVED)

[Peter Michael Calum]

Hi Martin

Now you got it !

Executing: /usr/bin/ipmitool -I lan -H khk9dsk34-mgnt.ip.tdk.dk -U mgntuser -P 
[set] -p 623 -L ADMINISTRATOR chassis power status

1  Address lookup for khk9dsk34-mgnt.ip.tdk.dk failed
Address lookup for khk9dsk34-mgnt.ip.tdk.dk failed
Address lookup for khk9dsk34-mgnt.ip.tdk.dk failed
Unable to get Chassis Power Status

DNS was defined under installation, but both hosts has been rebooted, and now 
/etc/resolv.conf is empty
After I redefined nameservers in /etc/resolv.conf it works

Executing: /usr/bin/ipmitool -I lan -H khk9dsk34-mgnt.ip.tdk.dk -U mgntuser -P 
[set] -p 623 -L ADMINISTRATOR chassis power status
0 Chassis Power is on

I have seen this problem earlier. - After reboot /etc/resolv.conf is empty !!

Thank you for your help

Peter Calum
TDC


Fra: Martin Perina [mailto:mper...@redhat.com]
Sendt: 28. juli 2016 11:08
Til: Peter Michael Calum <pe...@tdc.dk>
Cc: users@ovirt.org; Eli Mesika <emes...@redhat.com>
Emne: Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hi Peter,
see my inline responses:

On Thu, Jul 28, 2016 at 9:32 AM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi Martin

I see no firewall issues.

I have made some more tests :

RHEV  3.6 host khk9dsk30  test to khk9dsk34 & khk9dsk35 - OK
RHEV  3.6 host khk9dsk31  test to khk9dsk34 & khk9dsk35 - OK
RHEV  3.5 host khk9dsk32  test to khk9dsk34 & khk9dsk35 - OK
RHEV  3.5 host khk9dsk33  test to khk9dsk34 & khk9dsk35 – OK
OVIRT 4.01 host
​​
khk9dsk34  test to khk9dsk34 & khk9dsk35 – FAIL
OVIRT 4.01 host khk9dsk35  test to khk9dsk34 & khk9dsk35 – FAIL
OVIRT 4.01 host khk9dsk34  test to khk9dsk30 & khk9dsk31 – FAIL

Could you check in the code  that ipmilan sends on port udp 623 ?

​Yes, this is the default port
​


All hosts are on same VLAN
[root@khk9dsk31 ~]# fence_ipmilan -a 
khk9dsk35-mgnt.ip.tdk.dk<http://khk9dsk35-mgnt.ip.tdk.dk> -l mgntuser –p 
 -o status
Status: ON
[root@khk9dsk31 ~]# fence_ipmilan -a 
khk9dsk34-mgnt.ip.tdk.dk<http://khk9dsk34-mgnt.ip.tdk.dk> -l mgntuser -p 
 -o status
Status: ON
[root@khk9dsk35 ~]# fence_ipmilan -a 
khk9dsk33-mgnt.ip.tdk.dk<http://khk9dsk33-mgnt.ip.tdk.dk> -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

[root@khk9dsk35 ~]# fence_ipmilan -a 
khk9dsk30-mgnt.ip.tdk.dk<http://khk9dsk30-mgnt.ip.tdk.dk> -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

[root@khk9dsk35 ~]# fence_ipmilan -a 
khk9dsk34-mgnt.ip.tdk.dk<http://khk9dsk34-mgnt.ip.tdk.dk> -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

​
​From the above I can say that there are some networking issues on host ​

​
​
khk9dsk35​, you said that firewall is OK, so are IPMI hostnames resolvable?
Please also try to execute above with '-v' as we may get a bit more info about 
the issue.
​


[root@
​​
khk9dsk35 ~]# fence_ipmilan -a 
khk9dsk35-mgnt.ip.tdk.dk<http://khk9dsk35-mgnt.ip.tdk.dk> -l mgntuser -p 
 -o status
Failed: Unable to obtain correct plug status or plug is not available

​This is normal, you are usually not able to connect to IPMI port of the host 
from the host​

​Thanks
Martin Perina
​

Br,
Peter Calum
Fra: users-boun...@ovirt.org<mailto:users-boun...@ovirt.org> 
[mailto:users-boun...@ovirt.org<mailto:users-boun...@ovirt.org>] På vegne af 
Peter Michael Calum
Sendt: 27. juli 2016 21:30
Til: Martin Perina <mper...@redhat.com<mailto:mper...@redhat.com>>
Cc: users@ovirt.org<mailto:users@ovirt.org>
Emne: [Phish] - Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hi Martin
I was wondering if this could be a firewall problem. We have recently 
introduced new fw rules, and I have not tested fencing on the 2 hypervisors 
before I switched them to ovirt 4, but there was no alarm in the old setup 
before I switched. - I will investigate this further to be sure, and will 
return.
Thanks for your help
/Peter


Fra: Martin Perina [mailto:mper...@redhat.com]
Sendt: 27. juli 2016 20:19
Til: Peter Michael Calum <pe...@tdc.dk<mailto:pe...@tdc.dk>>
Cc: users@ovirt.org<mailto:users@ovirt.org>; Eli Mesika 
<emes...@redhat.com<mailto:emes...@redhat.com>>
Emne: Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hmm, it's really strange that this is working on 3.6 and not on 4.0, I don't 
see any obvious error, so we need to find out what are correct parameters for 
your fencing device.
The easiest way is to execute fence_ipmilan, according to vdsm.log following 
are your current options:
fence_ipmilan -a khk9dsk35-mgnt.ip.tdk.dk<http://khk9dsk35-mgnt.ip.tdk.dk> -l 
mgntuser -p  -o status
Does the above works if it's execute from 
khk9dsk34-mgnt.ip.tdk.dk<http://khk9dsk34-mgnt.ip.tdk.dk>? Btw is username 
correct? S

[ovirt-users] Just a test - delete this

[Peter Michael Calum]

Just a test
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

[Peter Michael Calum]

Hi Martin
I was wondering if this could be a firewall problem. We have recently 
introduced new fw rules, and I have not tested fencing on the 2 hypervisors 
before I switched them to ovirt 4, but there was no alarm in the old setup 
before I switched. - I will investigate this further to be sure, and will 
return.
Thanks for your help
/Peter


Fra: Martin Perina [mailto:mper...@redhat.com]
Sendt: 27. juli 2016 20:19
Til: Peter Michael Calum <pe...@tdc.dk>
Cc: users@ovirt.org; Eli Mesika <emes...@redhat.com>
Emne: Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hmm, it's really strange that this is working on 3.6 and not on 4.0, I don't 
see any obvious error, so we need to find out what are correct parameters for 
your fencing device.
The easiest way is to execute fence_ipmilan, according to vdsm.log following 
are your current options:
fence_ipmilan -a khk9dsk35-mgnt.ip.tdk.dk<http://khk9dsk35-mgnt.ip.tdk.dk> -l 
mgntuser -p  -o status
Does the above works if it's execute from 
khk9dsk34-mgnt.ip.tdk.dk<http://khk9dsk34-mgnt.ip.tdk.dk>? Btw is username 
correct? Shouldn't be there 'mgmtuser'?
If all of above is correct and you are still not able to get power status, here 
are options you could try:
-v
--lanplus
-4

Martin Perina

On Wed, Jul 27, 2016 at 5:07 PM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi,

Thank you for answering.

Here is the logs, one from each node.
I see the test from khk9dsk34 goes over khk9dsk35 and vice versa.

Same setup as on my redhat 3.6 setup, and no custom options.

Thanks
Peter


Fra: Martin Perina [mailto:mper...@redhat.com<mailto:mper...@redhat.com>]
Sendt: 27. juli 2016 11:56
Til: Peter Michael Calum <pe...@tdc.dk<mailto:pe...@tdc.dk>>
Cc: users@ovirt.org<http://ovirt.org>; Eli Mesika 
<emes...@redhat.com<mailto:emes...@redhat.com>>
Emne: Re: [ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

Hi Peter,
could you please share with us vdsm.log from the host that was used as fence 
proxy (the one that actually executed fence_ipmi agent)?
Also could you please check that fence agent options are the same as on 3.6 
setup? Do you any any custom options for this specific agent?
Thanks
Martin

On Wed, Jul 27, 2016 at 8:34 AM, Peter Michael Calum 
<pe...@tdc.dk<mailto:pe...@tdc.dk>> wrote:
Hi
I’m testing on Ovirt 4.01 and got errors when testing fencing on the hosts
I use IBM x3550M4 as host and ipmilan as fence agent.

I get this error when testing.
 [Failed: Unable to obtain correct plug status or plug is not available, , ]

I also have a 3.6 setup and there it works.

Ovirt Node 4.02
oVirt Engine Version: 4.0.1.1-1.el7.centos

Is this list the correct way to report errors ?

Venlig hilsen / Kind regards
Peter Calum
TDC, Denmark


___
Users mailing list
Users@ovirt.org<mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Fencing errors on oVirt Engine Version: 4.0.1

[Peter Michael Calum]

Hi
I'm testing on Ovirt 4.01 and got errors when testing fencing on the hosts
I use IBM x3550M4 as host and ipmilan as fence agent.

I get this error when testing.
 [Failed: Unable to obtain correct plug status or plug is not available, , ]

I also have a 3.6 setup and there it works.

Ovirt Node 4.02
oVirt Engine Version: 4.0.1.1-1.el7.centos

Is this list the correct way to report errors ?

Venlig hilsen / Kind regards
Peter Calum
TDC, Denmark

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Problems installing Ovirt 4.02 Node

[Peter Michael Calum]

Hi group,

Im trying to install a Ovirt 4.02 Hypervisor Node 
(ovirt-node-ng-installer-ovirt-4.0-pre-2016072108.iso).
Hardware is IBM X3550M4 with 256 GB Ram.
I follow the installation steps and use automatic partitioning and installation 
goes fine without errors.
I only create the root user.

When I log in after reboot I get this error :

Last login: Tue Jul 26 08:30:58 2016 from slt-vpn-62-242-222-13.eng.tdc.net

  imgbase status: DEGRADED
  Please check the status manually using `imgbase check`

[root@khk9dsk34 ~]# imgbase check
Status: FAILED
Mount points ... FAILED - This can happen if the installation was performed 
incorrectly
  Separate /var ... OK
  Discard is used ... FAILED - 'discard' mount option was not added or got 
removed
Basic storage ... OK
  Initialized VG ... OK
  Initialized Thin Pool ... OK
  Initialized LVs ... OK
Thin storage ... OK
  Checking available space in thinpool ... OK
  Checking thinpool auto-extend ... OK

Another question : Where do I define the Ovirt manager address.

Venlig hilsen / Kind regards
Peter Calum
Tlf: +45 66 69 36 82
Mobil: +45 40 41 71 85
E-mail pe...@tdc.dk
[cid:image001.png@01D1E71A.D0172A00]
TDC Group
Teknologi & Kapacitet
Systemer, OTMS
Teglholmsgade 1,
F-059 2450 København SV


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users