[ovirt-users] Image File Owner change Situation. (root:root)
Hello @All, This has happened to us for the first time and only on One VM. I believe it happened with the switch from Fuse to "LibgfApi" in Ovirt. I was using LibgfApiSupported=True on 4.2.8 . I upgraded to 4.3.8 and did NOT restart all of my VMs (30+) but only some VMs, no problem. Eventually I noticed that LibgfApiSupported=False and reset it to True. The VM was Running WindowsServer2016 and we did a Cold-Reboot (not VM Restart). It did not come back online due to "Invalid Volume" which was eventually due to the IMAGEs (Boot and Data) being user:group=root but not the meta,lease or directory. Nor any other VM have/had this problem but they were (if at all) completely stopped and restarted. I am looking for another VM that has not yet been restarted to test this theory. I thought this would be interesting for others looking into this problem. (I will ask my Colleague next week what he means with Cold-Reboot vs Warm-reboot) Stay Healthy. Cheers, Robert O'Kane -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HMG2SQBWUPXZJ45CFLE6J2TLVTNQ77QV/
[ovirt-users] Re: HP NetXen Incorporated NX3031 driver
Hi Leo, I have a similar problem with Centos7 and "Modern" ARECA Scsi cards. I end up manually installing the new drivers for the card each update (before the reboot). If there is a driver for your card but not in the current kernel you can also manually install it. By warned, you have to do the driver update by hand every kernel update. And do not forget depmod Cheers, Robert O'Kane Am 07.09.2019 um 23:12 schrieb Leo David: Hi everyone, I have this bloody card installed on a node, and it seems that no driver can be loaded for it, "ip link sh" does not show it. Any recommendation about installing this network card on oVirt 4.2.8 ? lspci -v 05:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter Flags: fast devsel, IRQ 31 Memory at d9c0 (64-bit, non-prefetchable) [size=2M] Memory at da00 (64-bit, non-prefetchable) [size=32M] Expansion ROM at d800 [disabled] [size=64K] Capabilities: [40] MSI-X: Enable- Count=64 Masked- Capabilities: [80] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75 Kernel modules: netxen_nic 05:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42) Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter Flags: fast devsel, IRQ 33 Memory at d9e0 (64-bit, non-prefetchable) [size=2M] Memory at dc00 (64-bit, non-prefetchable) [size=32M] Capabilities: [40] MSI-X: Enable- Count=64 Masked- Capabilities: [80] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75 Kernel modules: netxen_nic dmesg | grep netxen [ 2.188078] netxen_nic :05:00.0: 2MB memory map [ 2.188371] netxen_nic :05:00.0: Timeout reached waiting for rom done [ 2.188442] netxen_nic :05:00.0: Error getting board config info. [ 2.189488] netxen_nic: probe of :05:00.0 failed with error -5 [ 2.190438] netxen_nic :05:00.1: 2MB memory map [ 2.190741] netxen_nic :05:00.1: Timeout reached waiting for rom done [ 2.190808] netxen_nic :05:00.1: Error getting board config info. [ 2.190964] netxen_nic: probe of :05:00.1 failed with error -5 ... Thank you very much ! Leo -- Best regards, Leo David -- Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MJITV2SHM4ESXC5BK6UMS6LM46ROSOQ7/
[ovirt-users] Re: Does cluster upgrade wait for heal before proceeding to next host?
Hello, Often(?), updates to a hypervisor that also has (provides) a Gluster brick takes the hypervisor offline (updates often require a reboot). This reboot then makes the brick "out of sync" and it has to be resync'd. I find it a "feature" than another host that is also part of a gluster domain can not be updated (rebooted) before all the bricks are updated in order to guarantee there is not data loss. It is called Quorum, or? Always let the heal process end. Then the next update can start. For me there is ALWAYS a healing time before Gluster is happy again. Cheers, Robert O'Kane Am 06.08.2019 um 16:38 schrieb Shani Leviim: Hi Jayme, I can't recall such a healing time. Can you please retry and attach the engine & vdsm logs so we'll be smarter? *Regards, * *Shani Leviim * On Tue, Aug 6, 2019 at 5:24 PM Jayme <mailto:jay...@gmail.com>> wrote: I've yet to have cluster upgrade finish updating my three host HCI cluster. The most recent try was today moving from oVirt 4.3.3 to 4.3.5.5. The first host updates normally, but when it moves on to the second host it fails to put it in maintenance and the cluster upgrade stops. I suspect this is due to that fact that after my hosts are updated it takes 10 minutes or more for all volumes to sync/heal. I have 2Tb SSDs. Does the cluster upgrade process take heal time in to account before attempting to place the next host in maintenance to upgrade it? Or is there something else that may be at fault here, or perhaps a reason why the heal process takes 10 minutes after reboot to complete? ___ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5XM3QB3364ZYIPAKY4KTTOSJZMCWHUPD/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GBX3L23MWGMTF7Q4KGVR63RIQZFYXGWK/ -- Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OBAHFFFTDOI7LHAH5AVI5OPUQUQTABWM/
[ovirt-users] Re: oVirt Node Blocks VirtViewer/SPICE connections (Did Not Auto-Configure Firewall?)
Quick test? service firewalld stop then ALL ports are open. NOT Recommended! be sure to turn it back on when your tests are complete. Cheers, Robert O'Kane On 05/31/2019 10:37 AM, Simone Tiraboschi wrote: On Thu, May 30, 2019 at 2:56 PM Zachary Winter mailto:zachary.win...@witsconsult.com>> wrote: I am unable to connect via SPICE (Windows VirtViewer) to VM's running on my compute node. It appears the node did not auto-configure the firewall because the .vv files appear to point to the correct IP address and common ports. Is there a way to re-run/re-execute the firewall auto-configuration now that the node has already been installed? From the Web UI, you can set the host to maintenance mode and then select reinstall: it will also configure the firewall. But are you really sure that the issue is on host side? If not, does anyone happen to have firewall-cmd commands handy that I can run to resolve this quickly? Which ports need to be opened? The specs on the node are as follows: OS Version: RHEL - 7 - 6.1810.2.el7.centos OS Description: oVirt Node 4.3.3.1 Kernel Version: 3.10.0 - 957.10.1.el7.x86_64 KVM Version: 2.12.0 - 18.el7_6.3.1 LIBVIRT Version: libvirt-4.5.0-10.el7_6.6 VDSM Version: vdsm-4.30.13-1.el7 SPICE Version: 0.14.0 - 6.el7_6.1 GlusterFS Version: glusterfs-5.5-1.el7 CEPH Version: librbd1-10.2.5-4.el7 Open vSwitch Version: openvswitch-2.10.1-3.el7 Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3 VNC Encryption: Enabled -- Simone Tiraboschi He / Him / His Principal Software Engineer Red Hat<https://www.redhat.com/> stira...@redhat.com <mailto:stira...@redhat.com> @redhatjobs <https://twitter.com/redhatjobs> redhatjobs <https://www.facebook.com/redhatjobs> @redhatjobs <https://instagram.com/redhatjobs> <https://red.ht/sig> <https://redhat.com/summit> -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JSGZ4YEQ24AHVEOFZLWNZGHBLZ3KUUT5/
[ovirt-users] Re: alertMessage, [Warning! Low confirmed free space on gluster volume M2Stick1]
forgot the Gluster Versions: Hypervisors: glusterfs-3.12.15-1.el7.x86_64 glusterfs-api-3.12.15-1.el7.x86_64 glusterfs-cli-3.12.15-1.el7.x86_64 glusterfs-client-xlators-3.12.15-1.el7.x86_64 glusterfs-events-3.12.15-1.el7.x86_64 glusterfs-fuse-3.12.15-1.el7.x86_64 glusterfs-geo-replication-3.12.15-1.el7.x86_64 glusterfs-gnfs-3.12.15-1.el7.x86_64 glusterfs-libs-3.12.15-1.el7.x86_64 glusterfs-rdma-3.12.15-1.el7.x86_64 glusterfs-server-3.12.15-1.el7.x86_64 libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.4.x86_64 python2-gluster-3.12.15-1.el7.x86_64 vdsm-gluster-4.20.46-1.el7.x86_64 engine: glusterfs-3.12.15-1.el7.x86_64 glusterfs-api-3.12.15-1.el7.x86_64 glusterfs-cli-3.12.15-1.el7.x86_64 glusterfs-client-xlators-3.12.15-1.el7.x86_64 glusterfs-libs-3.12.15-1.el7.x86_64 libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.4.x86_64 On 03/06/2019 09:22 AM, Robert O'Kane wrote: Hello, With my first "in Ovirt" made Gluster Storage I am getting some annoying Warnings. On the Hypervisor(s) engine.log : 2019-03-05 13:07:45,281+01 INFO [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand] (DefaultQuartzScheduler5) [59957167] START, GetGlusterVolumeAdvancedDetailsVDSCommand(HostName = Hausesel3, GlusterVolumeAdvancedDetailsVDSParameters:{hostId='d7db584e-03e3-4a37-abc7-73012a9f5ba8', volumeName='M2Stick1'}), log id: 74482de6 2019-03-05 13:07:46,814+01 INFO [org.ovirt.engine.core.bll.lock.InMemoryLockManager] (DefaultQuartzScheduler10) [6d40c5d0] Failed to acquire lock and wait lock 'EngineLock:{exclusiveLocks='[27f8ed93-c857-41ae-af16-e1af9f0b62d4=GLUSTER]', sharedLocks=''}' 2019-03-05 13:07:46,823+01 INFO [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand] (DefaultQuartzScheduler5) [59957167] FINISH, GetGlusterVolumeAdvancedDetailsVDSCommand, return: org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@868edb00, log id: 74482de6 I find no other correlated messages in the Gluster logs. Where else should I look? It (seems) to work very well. Just these "Warnings" which only worry me due to the "Failed to acquire lock" messages. This is one of 3 Gluster Storage Domains. The other 2 were "Hand made" and exist since Ovirt-3.5 and show no messages. 1x standalone engine 6x Hypervisors in 2 clusters. One other special condition: I am in the processes of moving my VM's to a second cluster (same Data Center) with a different defined Gluster Network. (New 10Gb cards). All Hypervisors see all Networks. but since there is only one SPM, the SPM is never a "Gluster Peer" of all Domains due to the "only one Gluster Network per Cluster" definition. Is this the Problem/Situation? There is another "Hand Made" Domain in the new Cluster but it does not have any problems. The only difference between the two is that the new Domain was created over the Ovirt Web interface. Cheers, Robert O'Kane engine: libgovirt-0.3.4-1.el7.x86_64 libvirt-bash-completion-4.5.0-10.el7_6.4.x86_64 libvirt-client-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-interface-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-network-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-qemu-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-secret-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-kvm-4.5.0-10.el7_6.4.x86_64 libvirt-glib-1.0.0-1.el7.x86_64 libvirt-libs-4.5.0-10.el7_6.4.x86_64 libvirt-python-4.5.0-1.el7.x86_64 ovirt-ansible-cluster-upgrade-1.1.10-1.el7.noarch ovirt-ansible-disaster-recovery-1.1.4-1.el7.noarch ovirt-ansible-engine-setup-1.1.6-1.el7.noarch ovirt-ansible-hosted-engine-setup-1.0.2-1.el7.noarch ovirt-ansible-image-template-1.1.9-1.el7.noarch ovirt-ansible-infra-1.1.10-1.el7.noarch ovirt-ansible-manageiq-1.1.13-1.el7.noarch ovirt-ansible-repositories-1.1.3-1.el7.noarch ovirt-ansible-roles-1.1.6-1.el7.noarch ovirt-ansible-shutdown-env-1.0.0-1.el7.noarch ovirt-ansible-v2v-conversion-host-1.9.0-1.el7.noarch ovirt-ansible-vm-infra-1.1.12-1.el7.noarch ovirt-cockpit-sso-0.0.4-1.el7.noarch ovirt-engine-4.2.8.2-1.el7.noarch ovirt-engine-api-explorer-0.0.2-1.el7.centos.noarch ovirt-engine-backend-4.2.8.2-1.el7.noarch ovirt-engine-cli-3.6
[ovirt-users] alertMessage, [Warning! Low confirmed free space on gluster volume M2Stick1]
Hello, With my first "in Ovirt" made Gluster Storage I am getting some annoying Warnings. On the Hypervisor(s) engine.log : 2019-03-05 13:07:45,281+01 INFO [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand] (DefaultQuartzScheduler5) [59957167] START, GetGlusterVolumeAdvancedDetailsVDSCommand(HostName = Hausesel3, GlusterVolumeAdvancedDetailsVDSParameters:{hostId='d7db584e-03e3-4a37-abc7-73012a9f5ba8', volumeName='M2Stick1'}), log id: 74482de6 2019-03-05 13:07:46,814+01 INFO [org.ovirt.engine.core.bll.lock.InMemoryLockManager] (DefaultQuartzScheduler10) [6d40c5d0] Failed to acquire lock and wait lock 'EngineLock:{exclusiveLocks='[27f8ed93-c857-41ae-af16-e1af9f0b62d4=GLUSTER]', sharedLocks=''}' 2019-03-05 13:07:46,823+01 INFO [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand] (DefaultQuartzScheduler5) [59957167] FINISH, GetGlusterVolumeAdvancedDetailsVDSCommand, return: org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@868edb00, log id: 74482de6 I find no other correlated messages in the Gluster logs. Where else should I look? It (seems) to work very well. Just these "Warnings" which only worry me due to the "Failed to acquire lock" messages. This is one of 3 Gluster Storage Domains. The other 2 were "Hand made" and exist since Ovirt-3.5 and show no messages. 1x standalone engine 6x Hypervisors in 2 clusters. One other special condition: I am in the processes of moving my VM's to a second cluster (same Data Center) with a different defined Gluster Network. (New 10Gb cards). All Hypervisors see all Networks. but since there is only one SPM, the SPM is never a "Gluster Peer" of all Domains due to the "only one Gluster Network per Cluster" definition. Is this the Problem/Situation? There is another "Hand Made" Domain in the new Cluster but it does not have any problems. The only difference between the two is that the new Domain was created over the Ovirt Web interface. Cheers, Robert O'Kane engine: libgovirt-0.3.4-1.el7.x86_64 libvirt-bash-completion-4.5.0-10.el7_6.4.x86_64 libvirt-client-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-interface-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-network-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-qemu-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-secret-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.4.x86_64 libvirt-daemon-kvm-4.5.0-10.el7_6.4.x86_64 libvirt-glib-1.0.0-1.el7.x86_64 libvirt-libs-4.5.0-10.el7_6.4.x86_64 libvirt-python-4.5.0-1.el7.x86_64 ovirt-ansible-cluster-upgrade-1.1.10-1.el7.noarch ovirt-ansible-disaster-recovery-1.1.4-1.el7.noarch ovirt-ansible-engine-setup-1.1.6-1.el7.noarch ovirt-ansible-hosted-engine-setup-1.0.2-1.el7.noarch ovirt-ansible-image-template-1.1.9-1.el7.noarch ovirt-ansible-infra-1.1.10-1.el7.noarch ovirt-ansible-manageiq-1.1.13-1.el7.noarch ovirt-ansible-repositories-1.1.3-1.el7.noarch ovirt-ansible-roles-1.1.6-1.el7.noarch ovirt-ansible-shutdown-env-1.0.0-1.el7.noarch ovirt-ansible-v2v-conversion-host-1.9.0-1.el7.noarch ovirt-ansible-vm-infra-1.1.12-1.el7.noarch ovirt-cockpit-sso-0.0.4-1.el7.noarch ovirt-engine-4.2.8.2-1.el7.noarch ovirt-engine-api-explorer-0.0.2-1.el7.centos.noarch ovirt-engine-backend-4.2.8.2-1.el7.noarch ovirt-engine-cli-3.6.9.2-1.el7.centos.noarch ovirt-engine-dashboard-1.2.4-1.el7.noarch ovirt-engine-dbscripts-4.2.8.2-1.el7.noarch ovirt-engine-dwh-4.2.4.3-1.el7.noarch ovirt-engine-dwh-setup-4.2.4.3-1.el7.noarch ovirt-engine-extension-aaa-jdbc-1.1.7-1.el7.centos.noarch ovirt-engine-extension-aaa-ldap-1.3.8-1.el7.noarch ovirt-engine-extension-aaa-ldap-setup-1.3.8-1.el7.noarch ovirt-engine-extensions-api-impl-4.2.8.2-1.el7.noarch ovirt-engine-lib-4.2.8.2-1.el7.noarch ovirt-engine-metrics-1.1.8.1-1.el7.noarch ovirt-engine-restapi-4.2.8.2-1.el7.noarch ovirt-engine-sdk-python-3.6.9.1-1.el7.centos.noarch ovirt-engine-setup-4.2.8.2-1.el7.noarch ovirt-engine-setup-base-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-ovirt-engine-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-ovirt-engine-common-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-vmconsole-proxy-helper-4.2.8.2-1.el7.noarch ovirt-engine-setup-plugin-websoc
[ovirt-users] Re: Configuring Ovirt + ACPI
Supermicro Boards use IPMI to controll their Servers. Not all X7 generation boards have IPMI standard. There is an extra card needed for these server boards. Check out the Supermicro website and search for IPMI options for your motherboard. Cheers, Robert O'Kane On 11/05/2018 10:32 PM, Jayme wrote: With dell servers for example it's as simple as editing the host and enabling power management then selecting the appropriate drac version and entering login details. I'm not familiar with what supermicro uses for remote management but there is likely an option there to support it On Mon, Nov 5, 2018, 4:20 PM David Johnson mailto:djohn...@maxistechnology.com> wrote: Good day all, Is there a simple step-by-step instruction to give my cluster controller the ability to turn the power for my compute nodes on and off? I am running ovirt 4.7.2 on Centos 7. My compute nodes are on Supermicro X7QC3 hosts. I know it is supposed to be there since every time I look at the dashbaord it complains that "Host has disabled power management". I imagine it is supposed to be trivial to configure. What I keep running into with the documents is the assumption that you already know what to do before you read the documents. This makes for a dizzy cycle of digging through various feature documents, manuals, etc, to end up back where I started. Any assistance would be appreciated. Regards, David Johnson Director of Development, Maxis Technology 844.696.2947 ext 702 (o) | 479.531.3590 (c) djohn...@maxistechnology.com <mailto:djohn...@maxistechnology.com> Maxis Techncology <http://www.maxistechnology.com> www.maxistechnology.com <http://www.maxistechnology.com> /stay connected <http://www.linkedin.com/in/pojoguy>/ ___ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FYGPKIQMXKOSUOVIQ3KBPCKV2UHW42F4/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SMFUZIXADYYPH6SDNNTYLWMNGJBJLN33/ -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CVOEMXGVKQBZT7E3KWMY6BBJSL6HLLE5/
[ovirt-users] Re: Failed to synchronize networks of Provider ovirt-provider-ovn
Hello, I have a simmilar issue with ovirt-provider-ovn. But in my config I see: ovirt-sso-client-secret=to_be_set Where do I find / how do I generate this token? Thanks, Robert O'Kane On 09/12/2018 04:42 PM, m...@set-pro.net wrote: I have a same issue with OVN provider and SSL, but certificate changes not helps to resolve it. I use following https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/appe-red_hat_enterprise_virtualization_and_ssl#Replacing_the_Manager_SSL_Certificate to replace my cert, and after reboot get this error. ovirt-ca-file= is a same SSL file which use WebUI. I restart ovirt-provider-ovn, i restart engine, i restart everything what i can restart. Nothing helps... Logs below. [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579) Traceback (most recent call last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", line 133, in _handle_request method, path_parts, content File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", line 175, in handle_request return self.call_response_handler(handler, content, parameters) File "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in call_response_handler return response_handler(content, parameters) File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", line 62, in post_tokens user_password=user_password) File "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in create_token return auth.core.plugin.create_token(user_at_domain, user_password) File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line 48, in create_token timeout=self._timeout()) File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75, in create_token username, password, engine_url, ca_file, timeout) File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 91, in _get_sso_token timeout=timeout File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54, in wrapper response = func(*args, **kwargs) File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47, in wrapper raise BadGateway(e) BadGateway: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579) [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log 2018-09-12 14:10:23,773+03 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock Acquired to object 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Running command: SyncNetworkProviderCommand internal: true. 2018-09-12 14:10:23,836+03 ERROR [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Command 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed: EngineException: (Failed with error Bad Gateway and code 5050) 2018-09-12 14:10:23,837+03 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock freed to object 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default task-6) [] User admin@internal successfully logged in with scopes: ovirt-app-admin ovirt-app-api ovirt-app-portal ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all ovirt-ext=token-info:authz-search ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate ovirt-ext=token:password-access 2018-09-12 14:14:12,587+03 INFO [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default task-6) [1bf1b763] Running command: CreateUserSessionCommand internal: false. 2018-09-12 14:14:12,628+03 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User admin@internal-authz connecting from '10.0.3.61' using session 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg==' logged in. 2018-09-12 14:14:30,972+03 INFO [org.ovirt.engine.core.bll.provider.ImportProviderCertificateCommand] (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] Running command: ImportProviderCe
[ovirt-users] Re: Weird Memory Leak Issue
Not for me. After restarting the engine,it doesn't matter if I restart the Hypervisors, I only get the "protocol=gluster" when I restart the VMs... migration is not enough. "virsh -r dumpxml " Cheers, Robert O'Kane On 08/29/2018 06:54 PM, Edward Clay wrote: Not sure how you're setup. I only had to migrate the VMs off to another hypervisor then put the hypervisor in maintenance which seems to unmount the one gluster volume. After upgrading, rebooting and activating the HV I could migrate VMs back to it. This seemed to work for me. ________ From: Robert O'Kane Sent: Wednesday, August 29, 2018 10:42:56 AM To: users@ovirt.org Subject: [ovirt-users] Re: Weird Memory Leak Issue **Security Notice - This external email is NOT from The Hut Group** Ah, the FUSE mounts... I just saw last week that the upgrade to 4.2 removed the "LibgfApiSupported" flag by default. That is possibly why the leak simply appeared OK, I was wondering where this came from. Tomorrow I will upgrade and test. I still will have to eventually reboot the VMs to get the gluster mounts again :-/ On 08/29/2018 05:18 PM, Cole Johnson wrote: Great! I'll look for the update. On Wed, Aug 29, 2018 at 7:50 AM Darrell Budic wrote: There’s a memory leak in gluster 3.12.9 - 3.12.12 on fuse mounted volumes, sounds like what you’re seeing. The fix is in 3.12.13, which should be showing up today or tomorrow in the centos repos (currently available from the testing repo). I’ve been running it overnight on one host to test, looks like they got it. From: Cole Johnson Subject: [ovirt-users] Weird Memory Leak Issue Date: August 29, 2018 at 9:35:39 AM CDT To: users@ovirt.org Hello, I have a hyperconverged, self hosted ovirt cluster with three hosts, running 4 VM's. The hosts are running the latest ovirt node. The VM's are Linux, Windows server 2016, and Windows Server 2008r2. The problem is with any host running the 2008r2 VM will run out of memory after 8-10 hours, causing any VM on the host to be paused, and making to host all but unresponsive. This problem seems to only exist with this specific VM. None of the other running VM's have this problem. I can resolve the problem by migrating the VM to a different host, then putting the host into maintenance mode, the activating it back. The leak appears to be in glusterfsd. Is there anything I can do to permanently fix this? __ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://www.ovirt.org/site/privacy-policy/> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://www.ovirt.org/community/about/community-guidelines/> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CLNILVLZ4D3BJO4JFW4UYQMZLPWOQJ6T/<https://lists.ovirt.org/archives/list/users@ovirt.org/message/CLNILVLZ4D3BJO4JFW4UYQMZLPWOQJ6T/> -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/<https://www.ovirt.org/site/privacy-policy/> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/<https://www.ovirt.org/community/about/community-guidelines/> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/F7EY4FX7UOBGWEXMVFNAAC22TDON3DSM/<https://lists.ovirt.org/archives/list/users@ovirt.org/message/F7EY4FX7UOBGWEXMVFNAAC22TDON3DSM/> Edward Clay Systems Administrator The Hut Group<http://www.thehutgroup.com/> Tel: Email: edward.c...@uk2group.com<mailto:edward.c...@uk2group.com> For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. Confidentiality Notice This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. Encryptions and Viruses Please note that this e-mail and any attachments have not been encrypted. They may therefore be
[ovirt-users] Re: Weird Memory Leak Issue
Ah, the FUSE mounts... I just saw last week that the upgrade to 4.2 removed the "LibgfApiSupported" flag by default. That is possibly why the leak simply appeared OK, I was wondering where this came from. Tomorrow I will upgrade and test. I still will have to eventually reboot the VMs to get the gluster mounts again :-/ On 08/29/2018 05:18 PM, Cole Johnson wrote: Great! I'll look for the update. On Wed, Aug 29, 2018 at 7:50 AM Darrell Budic wrote: There’s a memory leak in gluster 3.12.9 - 3.12.12 on fuse mounted volumes, sounds like what you’re seeing. The fix is in 3.12.13, which should be showing up today or tomorrow in the centos repos (currently available from the testing repo). I’ve been running it overnight on one host to test, looks like they got it. From: Cole Johnson Subject: [ovirt-users] Weird Memory Leak Issue Date: August 29, 2018 at 9:35:39 AM CDT To: users@ovirt.org Hello, I have a hyperconverged, self hosted ovirt cluster with three hosts, running 4 VM's. The hosts are running the latest ovirt node. The VM's are Linux, Windows server 2016, and Windows Server 2008r2. The problem is with any host running the 2008r2 VM will run out of memory after 8-10 hours, causing any VM on the host to be paused, and making to host all but unresponsive. This problem seems to only exist with this specific VM. None of the other running VM's have this problem. I can resolve the problem by migrating the VM to a different host, then putting the host into maintenance mode, the activating it back. The leak appears to be in glusterfsd. Is there anything I can do to permanently fix this? __ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CLNILVLZ4D3BJO4JFW4UYQMZLPWOQJ6T/ -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/F7EY4FX7UOBGWEXMVFNAAC22TDON3DSM/
[ovirt-users] Next Gluster Updates?
I had a bug request in Bugzilla for Gluster being killed due to a memory leak. The Gluster People say it is fixed in gluster-3.12.13 When will Ovirt have this update? I am getting tired of having to restart my hypervisors every week or so... I currently have ovirt-release42-4.2.5.1-1.el7.noarch and yum check-updates shows me no new gluster versions.(still 3.12.11) Cheers, Robert O'Kane -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/L7ZTIQA3TAM7IR4LCTWMXXCSGCLWUJJN/
Re: [ovirt-users] Problem to upgrade ovirt
Hello, I had a similar problem with the engine update from 4.1.9 to 4.2.2. For me it was SELinux in Enforcing mode on the host. You should check that SELinux is in "Enforcing" mode and that the audit daemon is complaining about postgres95. "audit2why -a" I set the host to "Permissive", did the upgrade and it worked for me. But you may have to leave it in "Permissive" mode until you can update the SELinux rules. *IF* the problem is SELinux I would suggest: 1: Clean up the auditd logs (make sure all old problems are corrected). Reset the auditd logs so the following output is "cleaner". The "audit2why -a" command should show nothing. Please RYFM 2: Set SELinux to "Permissive" mode. 3: Apply the Ovirt-engine updates. Make sure everything works. 4: run "audit2why -a" and see what the warnings are or go directly to 5 5: generate the new rules with: audit2allow -a -M postgres95-selinux-ovirt 6: add the rules to the system: semodule -i postgres95-selinux-ovirt.pp 7: It should now be possible to set SELinux back to "Enforcing" Good Luck, Robert O'Kane Am 21.04.2018 um 10:26 schrieb Marcelo Leandro: Hello, I have problem when i try upgrade the ovirt to 4.2, my version is 4.1.9, I have problem when engine-setup try update the postgresql. Postgres version 9.2 I had this message: Log install: ERROR: pg_upgrade tool failed ERROR: Upgrade failed. * See /var/lib/pgsql/upgrade_rh-postgresql95-postgresql.log for details. 2018-04-21 04:53:10,766-0300 DEBUG otopi.transaction transaction._prepare:66 exception during prepare phase Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/transaction.py", line 62, in _prepare element.prepare() File "/usr/share/ovirt-engine/setup/ovirt_engine_setup/engine_common/postgres.py", line 777, in prepare raiseOnError=True, File "/usr/lib/python2.7/site-packages/otopi/plugin.py", line 931, in execute command=args[0], RuntimeError: Command '/opt/rh/rh-postgresql95/root/usr/bin/postgresql-setup' failed to execute 2018-04-21 04:53:10,768-0300 DEBUG otopi.context context._executeMethod:143 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 133, in _executeMethod method['method']() File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/db/dbmsupgrade.py", line 89, in _updateDBMS oengcommcons.ProvisioningEnv.OLD_POSTGRES_SERVICE File "/usr/lib/python2.7/site-packages/otopi/transaction.py", line 106, in append self._prepare(element=element) File "/usr/lib/python2.7/site-packages/otopi/transaction.py", line 62, in _prepare element.prepare() File "/usr/share/ovirt-engine/setup/ovirt_engine_setup/engine_common/postgres.py", line 777, in prepare raiseOnError=True, File "/usr/lib/python2.7/site-packages/otopi/plugin.py", line 931, in execute command=args[0], RuntimeError: Command '/opt/rh/rh-postgresql95/root/usr/bin/postgresql-setup' failed to execute 2018-04-21 04:53:10,770-0300 ERROR otopi.context context._executeMethod:152 Failed to execute stage 'Misc configuration': Command '/opt/rh/rh-postgresql95/root/usr/bin/postgresql-setup' failed to execute Log postgres: Performing Consistency Checks - Checking cluster versions ok Checking database user is the install user ok Checking database connection settings ok Checking for prepared transactions ok Checking for reg* system OID user data typesok Checking for contrib/isn with bigint-passing mismatch ok Checking for invalid "line" user columnsok Creating dump of global objects ok Creating dump of database schemas engine ovirt_engine_history postgres template1 ok encodings for database "postgres" do not match: old "SQL_ASCII", new "UTF8" Failure, exiting I know that problem not is in oVirt , but anyone help me ? Thank you! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt 4.2.2-rc3 switching from legacy to OVS..
Make sure STP is OFF for each bridge. Then the warnings go away. Cheers, Robert O'Kane On 03/15/2018 11:21 AM, Dan Kenigsberg wrote: I know OVS is Experimental, but it worked in 4.1.x, and now we have to do a step back to legacy bridge just to use 4.2.x, which in a vlan environment just wreaks havoc (every VLAN need's a unique mac assigned to the bridge, which vdsm does not do, so suddenly you get the kernel complaining about seeing it's mac address several times.) Could you elaborate on this issue? What is wrong with a bridge that learns its mac from its underlying device? What wold like Vdsm to do, in your opinion? You can file a bug (or even send a patch) if there is a functionality that you'd like to fix. -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ANN] oVirt 4.2.0 First Beta Release is now available for testing
-1 for mobile usability over desktop Please keep the "Richt Click" Funktion. On 11/03/2017 12:47 PM, FERNANDO FREDIANI wrote: +1 for complete diskless hosts -1 for mobile usability over desktop :-) Regards Fernando -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM remote noVNC console
I open the Ovirt WEB User page (over the ssh tunnel) and open the "console". I have a spice/vnc client on my local computer. Actually, with the native windows Spice client you do not need the X-Windows. I do not need to go to the hypervisor(s) directly as they are on the same net as the Hosted server On 10/06/2017 12:20 PM, Alan Griffiths wrote: I have this working through an SSH tunnel, although it adds some extra steps. 1. Figure out which port your VM console is bound to (5900 + offset). 2. SSH to the hypervisor tunneling a local port to that remote console port. 3. Click on the console link in the Engine and locally save the vv file. 4. Edit the vv file; change host to localhost and port to whichever port you configured for the local side of the tunnel. 5. Save and run the vv file with your SPICE client. You have two minutes to connect from downloading the vv file before the password expires. On 5 October 2017 at 22:58, Alex K wrote: Any idea how this can be addressed? On Sep 19, 2017 23:07, "Alex K" wrote: Hi all, I am trying to get the VM console of a VM through SSH socks proxy. This is a scenario I will frequently face, as the ovirt cluster will be available only though a remote SSH tunnel. I am trying several console options without success. With SPICE or VNC I get issue with virt-viewer saying "Unable to connect to libvirt with URI [none]' With noVNC I get a separate tab on browser where it is stuck showing "loading". Has anyone success with this kind of remote console access? Thanx, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM remote noVNC console
Hello, I run a local X-Windows server on my client and ssh to the remote host with the -Y option. This forwards all remote X windows commands to the local X-Window server. I can then get my remote windows to run locally. Good Luck, Robert O'Kane On 10/05/2017 11:58 PM, Alex K wrote: Any idea how this can be addressed? On Sep 19, 2017 23:07, "Alex K" mailto:rightkickt...@gmail.com>> wrote: Hi all, I am trying to get the VM console of a VM through SSH socks proxy. This is a scenario I will frequently face, as the ovirt cluster will be available only though a remote SSH tunnel. I am trying several console options without success. With SPICE or VNC I get issue with virt-viewer saying "Unable to connect to libvirt with URI [none]' With noVNC I get a separate tab on browser where it is stuck showing "loading". Has anyone success with this kind of remote console access? Thanx, Alex -- Robert O'Kane Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln fon: +49(221)20189-223 fax: +49(221)20189-49223 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users