Re: [ovirt-users] Node network setup

[Edward Haas]

It is not clear to me what you are attempting to do exactly, but networking
settings should be handled through the setup networks window on Engine.
(Network->Hosts->->[specific host]->Interface tab -> SetupNetwork

You can then define bonds by dragging the nics one over the other.

Thanks,
Edy.

On Tue, Jan 30, 2018 at 9:07 PM,  wrote:

> Hi,
> I am trying to setup a cluster of two nodes, with self hoste Engine.
> Things went fine for the first machine, but it as rather messy about the
> second one.
> I would like to have load balancing and failover for both management
> network and storage (NFS repository).
>
> So what should I exactly do to get a working network stack which can be
> recognized when I try to add this host to the cluster ?
>
> Have tried configuring bonds and briges using Cockpit, using manual
> "ifcfg" files, but all the time I see the bridges and the bonds not linked
> in the Engine interface, so the new host cannot be enrolled.
> If I try to link "ovirtmgmt" to the the associated bond, I have a
> connectivity loss because it is the management device, and I have te
> restart the network services. As management configuration is not OK, I
> can't setup the storage connection.
>
> And if I just try to activate the host, I will install and configure
> things and then complain about missing "ovirtmgmt" and "nfs" networks,
> which both exist and work and Centos level.
>
> The interface, bonds and bridge names are copy/paste from the first server.
>
> # brctl show ovirtmgmt
> bridge namebridge idSTP enabledinterfaces
> ovirtmgmt8000.44a842394200nobond0
> # ip addr show bond0
> 33: bond0:  mtu 1500 qdisc
> noqueue master ovirtmgmt state UP qlen 1000
> link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
> inet6 fe80::46a8:42ff:fe39:4200/64 scope link
>valid_lft forever preferred_lft forever
> # ip addr show em1
> 2: em1:  mtu 1500 qdisc mq master
> bond0 state UP qlen 1000
> link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
> # ip addr show em3
> 4: em3:  mtu 1500 qdisc mq master
> bond0 state UP qlen 1000
> link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
>
> By the way, is it mandatory to stop and disable NetworkManager or not ?
>
> Thanks for any kind of help :-)
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Node network setup

[spfma . tech]

Hi,  I am trying to setup a cluster of two nodes, with self hoste Engine. 
Things went fine for the first machine, but it as rather messy about the second 
one. I would like to have load balancing and failover for both management 
network and storage (NFS repository).   So what should I exactly do to get a 
working network stack which can be recognized when I try to add this host to 
the cluster ?   Have tried configuring bonds and briges using Cockpit, using 
manual "ifcfg" files, but all the time I see the bridges and the bonds not 
linked in the Engine interface, so the new host cannot be enrolled. If I try to 
link "ovirtmgmt" to the the associated bond, I have a connectivity loss because 
it is the management device, and I have te restart the network services. As 
management configuration is not OK, I can't setup the storage connection.   And 
if I just try to activate the host, I will install and configure things and 
then complain about missing "ovirtmgmt" and "nfs" networks, which both exist 
and work and Centos level.   The interface, bonds and bridge names are 
copy/paste from the first server.   # brctl show ovirtmgmt
bridge name bridge id STP enabled interfaces
ovirtmgmt 8000.44a842394200 no bond0 # ip addr show bond0
33: bond0:  mtu 1500 qdisc noqueue master ovirtmgmt state UP qlen 1000
 link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
 inet6 fe80::46a8:42ff:fe39:4200/64 scope link 
 valid_lft forever preferred_lft forever
# ip addr show em1
2: em1:  mtu 1500 qdisc mq master bond0 state UP qlen 1000
 link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
# ip addr show em3
4: em3:  mtu 1500 qdisc mq master bond0 state UP qlen 1000
 link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff   By the way, is it 
mandatory to stop and disable NetworkManager or not ?   Thanks for any kind of 
help :-)
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users