[ovirt-users] Re: Error Adding host to cluster
Update: I manually installed libvirt and vdsm, then re-ran the install from the ovirt manager GUI. After this, I rebooted, then I had to configure the networks manually through the ovirt manager. The cluster is now operational. *David Johnson* ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FREFFRDQ7H3HIB2RYJPFYHABZCH7QQJO/
[ovirt-users] Re: Error Adding host to cluster
Update:
It's been a few days, but I did (finally) enable the virtualization in the
BIOS.
Unfortunately, I have the exact same symptom.
My Ovirt version is Version 4.4.4.7-1.el8
lscpu shows the vmx, vnmi, and tpr_shadow flags are set.
I did find this tidbit:
https://www.mail-archive.com/users@ovirt.org/msg64312.html
The Xeon E5-2680 v3 appears to be a "Sandy Bridge-EP" based processor, so
I'm not really clear about why ovirt is looking for the
model_Cascadelake-Server-noTSX flag
The elements displayed by virsh domcapabilities show
SandyBridge-IBRS and SandyBridge, but not SandyBridge-EP.
I did see references to KVM specific bios enablements, but nothing usable
for identifying them in the BIOS settings.
Any ideas would be appreciated
Thanks again in advance
*David Johnson*
On Sun, May 16, 2021 at 3:07 PM David Johnson
wrote:
> Thanks!
>
> *David Johnson*
>
>
> On Sun, May 16, 2021 at 2:59 PM Strahil Nikolov
> wrote:
>
>> Intel virtualization (VT-x)
>> Previously codenamed "Vanderpool", VT-x represents Intel's technology for
>> virtualization on the x86 platform. On November 13, 2005, Intel released
>> two models of Pentium 4 (Model 662 and 672) as the first Intel processors
>> to support VT-x. The CPU flag for VT-x capability is "vmx";
>>
>>
>> So you need to enable the virtualization for your system. For details
>> check your hardware vendor's documentation.
>>
>> Best Regards,
>> Strahil Nikolov
>>
>>
>>
>>
>>
>>
>> В неделя, 16 май 2021 г., 22:09:45 ч. Гринуич+3, David Johnson <
>> djohn...@maxistechnology.com> написа:
>>
>>
>>
>>
>>
>> Next question ... how do I enable the vmx flag?
>>
>> My google-fu is failing me here. I find a lot about how to see if its
>> set, but nothing about how to do it.
>>
>> Thanks,
>> David Johnson
>>
>>
>>
>>
>> On Sun, May 16, 2021 at 5:46 AM Strahil Nikolov
>> wrote:
>> > Enable VMX flag or you won't be able to run any VM on it.
>> >
>> > Best Regards,
>> > Strahil Nikolov
>> >
>> >
>> >
>> >
>> >
>> >
>> > В събота, 15 май 2021 г., 05:04:38 ч. Гринуич+3, David Johnson <
>> djohn...@maxistechnology.com> написа:
>> >
>> >
>> >
>> >
>> >
>> > When I attempt to install a new host to my cluster from the GUI I get
>> this set of errors/warnings, and the install fails.
>> >
>> > * Host has no default route
>> > * The Host CPU does not match the Cluster CPU Tye and is running in
>> a degraded mode. It is missing the following CPU flags: vmx,
>> model_Cascadelake-Server-noTSX.
>> >
>> > The new host has a brand new bare centos 8 installation on it. It
>> successfully installed from the internet.
>> >
>> > The new host hardware is 48x Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
>> >
>> > The pre-existing host is 64x Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz
>> >
>> > If I am reading the ansible logs correctly, ansible is failing to find
>> the ovirt-hosted-engine-setup package, which is confusing since I have a
>> separate physical machine for the engine (which I am using to install
>> from), and don't want a self hosted engine.
>> >
>> > Any advice would be welcome.
>> >
>> >
>> >
>> >
>> > ---
>> > Ansible logs from the most recent failed installation attempt:
>> >
>> > 2021-05-14 20:18:04,949 - runner_service.services.playbook - DEBUG -
>> cb_event_handler event_data={'uuid':
>> 'fa961926-9a3a-4d9e-a6bf-d53f98645af2', 'counter': 52, 'stdout': 'fatal: [
>> ovirt-host-04.maxisinc.net]: FAILED! => {"changed": false, "failures":
>> ["No package ovirt-hosted-engine-setup available."], "msg": "Failed to
>> install some of the specified packages", "rc": 1, "results": []}',
>> 'start_line': 44, 'end_line': 45, 'runner_ident':
>> '6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'runner_on_failed', 'pid':
>> 1742807, 'created': '2021-05-15T01:18:04.947870', 'parent_uuid':
>> 'd8cb8a87-894e-e341-1e1c-01a1', 'event_data': {'playbook':
>> 'ovirt-host-deploy.yml', 'playbook_uuid':
>> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'play': 'all', 'play_uuid':
>> 'd8cb8a87-894e-e341-1e1c-0007', 'play_pattern': 'all', 'task':
>> 'Install ovirt-hosted-engine-setup package', 'task_uuid':
>> 'd8cb8a87-894e-e341-1e1c-01a1', 'task_action': 'yum', 'task_args':
>> '', 'task_path':
>> '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-vdsm/tasks/packages.yml:6',
>> 'role': 'ovirt-host-deploy-vdsm', 'host': 'ovirt-host-04.maxisinc.net',
>> 'remote_addr': 'ovirt-host-04.maxisinc.net', 'res': {'msg': 'Failed to
>> install some of the specified packages', 'failures': ['No package
>> ovirt-hosted-engine-setup available.'], 'results': [], 'rc': 1,
>> 'invocation': {'module_args': {'name': ['ovirt-hosted-engine-setup'],
>> 'state': 'present', 'allow_downgrade': False, 'autoremove': False,
>> 'bugfix': False, 'disable_gpg_check': False, 'disable_plugin': [],
>> 'disablerepo': [], 'download_only': False, 'enable_plugin': [],
>> 'enablerepo': [], 'exclude': [], 'installroot': '/', 'install_repoquery':
>> True, 'install_weak_deps':
[ovirt-users] Re: Error Adding host to cluster
Thanks!
*David Johnson*
On Sun, May 16, 2021 at 2:59 PM Strahil Nikolov
wrote:
> Intel virtualization (VT-x)
> Previously codenamed "Vanderpool", VT-x represents Intel's technology for
> virtualization on the x86 platform. On November 13, 2005, Intel released
> two models of Pentium 4 (Model 662 and 672) as the first Intel processors
> to support VT-x. The CPU flag for VT-x capability is "vmx";
>
>
> So you need to enable the virtualization for your system. For details
> check your hardware vendor's documentation.
>
> Best Regards,
> Strahil Nikolov
>
>
>
>
>
>
> В неделя, 16 май 2021 г., 22:09:45 ч. Гринуич+3, David Johnson <
> djohn...@maxistechnology.com> написа:
>
>
>
>
>
> Next question ... how do I enable the vmx flag?
>
> My google-fu is failing me here. I find a lot about how to see if its set,
> but nothing about how to do it.
>
> Thanks,
> David Johnson
>
>
>
>
> On Sun, May 16, 2021 at 5:46 AM Strahil Nikolov
> wrote:
> > Enable VMX flag or you won't be able to run any VM on it.
> >
> > Best Regards,
> > Strahil Nikolov
> >
> >
> >
> >
> >
> >
> > В събота, 15 май 2021 г., 05:04:38 ч. Гринуич+3, David Johnson <
> djohn...@maxistechnology.com> написа:
> >
> >
> >
> >
> >
> > When I attempt to install a new host to my cluster from the GUI I get
> this set of errors/warnings, and the install fails.
> >
> > * Host has no default route
> > * The Host CPU does not match the Cluster CPU Tye and is running in
> a degraded mode. It is missing the following CPU flags: vmx,
> model_Cascadelake-Server-noTSX.
> >
> > The new host has a brand new bare centos 8 installation on it. It
> successfully installed from the internet.
> >
> > The new host hardware is 48x Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
> >
> > The pre-existing host is 64x Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz
> >
> > If I am reading the ansible logs correctly, ansible is failing to find
> the ovirt-hosted-engine-setup package, which is confusing since I have a
> separate physical machine for the engine (which I am using to install
> from), and don't want a self hosted engine.
> >
> > Any advice would be welcome.
> >
> >
> >
> >
> > ---
> > Ansible logs from the most recent failed installation attempt:
> >
> > 2021-05-14 20:18:04,949 - runner_service.services.playbook - DEBUG -
> cb_event_handler event_data={'uuid':
> 'fa961926-9a3a-4d9e-a6bf-d53f98645af2', 'counter': 52, 'stdout': 'fatal: [
> ovirt-host-04.maxisinc.net]: FAILED! => {"changed": false, "failures":
> ["No package ovirt-hosted-engine-setup available."], "msg": "Failed to
> install some of the specified packages", "rc": 1, "results": []}',
> 'start_line': 44, 'end_line': 45, 'runner_ident':
> '6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'runner_on_failed', 'pid':
> 1742807, 'created': '2021-05-15T01:18:04.947870', 'parent_uuid':
> 'd8cb8a87-894e-e341-1e1c-01a1', 'event_data': {'playbook':
> 'ovirt-host-deploy.yml', 'playbook_uuid':
> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'play': 'all', 'play_uuid':
> 'd8cb8a87-894e-e341-1e1c-0007', 'play_pattern': 'all', 'task':
> 'Install ovirt-hosted-engine-setup package', 'task_uuid':
> 'd8cb8a87-894e-e341-1e1c-01a1', 'task_action': 'yum', 'task_args':
> '', 'task_path':
> '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-vdsm/tasks/packages.yml:6',
> 'role': 'ovirt-host-deploy-vdsm', 'host': 'ovirt-host-04.maxisinc.net',
> 'remote_addr': 'ovirt-host-04.maxisinc.net', 'res': {'msg': 'Failed to
> install some of the specified packages', 'failures': ['No package
> ovirt-hosted-engine-setup available.'], 'results': [], 'rc': 1,
> 'invocation': {'module_args': {'name': ['ovirt-hosted-engine-setup'],
> 'state': 'present', 'allow_downgrade': False, 'autoremove': False,
> 'bugfix': False, 'disable_gpg_check': False, 'disable_plugin': [],
> 'disablerepo': [], 'download_only': False, 'enable_plugin': [],
> 'enablerepo': [], 'exclude': [], 'installroot': '/', 'install_repoquery':
> True, 'install_weak_deps': True, 'security': False, 'skip_broken': False,
> 'update_cache': False, 'update_only': False, 'validate_certs': True,
> 'lock_timeout': 30, 'conf_file': None, 'disable_excludes': None,
> 'download_dir': None, 'list': None, 'releasever': None}},
> '_ansible_no_log': False, 'changed': False}, 'start':
> '2021-05-15T01:18:03.800468', 'end': '2021-05-15T01:18:04.947696',
> 'duration': 1.147228, 'ignore_errors': None, 'event_loop': None, 'uuid':
> 'fa961926-9a3a-4d9e-a6bf-d53f98645af2'}}
> >
> > 2021-05-14 20:18:04,951 - runner_service.services.playbook - DEBUG -
> cb_event_handler event_data={'uuid':
> '1007f755-dee8-407f-999c-b08c8b813ea7', 'counter': 53, 'stdout': '\r\nPLAY
> RECAP
> *\r\
> novirt-host-04.maxisinc.net : ok=14 changed=1unreachable=0
> failed=1skipped=2rescued=0ignored=0 \r\n', 'start_line': 45,
> 'end_line': 49, 'runner_ident':
[ovirt-users] Re: Error Adding host to cluster
Intel virtualization (VT-x)
Previously codenamed "Vanderpool", VT-x represents Intel's technology for
virtualization on the x86 platform. On November 13, 2005, Intel released two
models of Pentium 4 (Model 662 and 672) as the first Intel processors to
support VT-x. The CPU flag for VT-x capability is "vmx";
So you need to enable the virtualization for your system. For details check
your hardware vendor's documentation.
Best Regards,
Strahil Nikolov
В неделя, 16 май 2021 г., 22:09:45 ч. Гринуич+3, David Johnson
написа:
Next question ... how do I enable the vmx flag?
My google-fu is failing me here. I find a lot about how to see if its set, but
nothing about how to do it.
Thanks,
David Johnson
On Sun, May 16, 2021 at 5:46 AM Strahil Nikolov wrote:
> Enable VMX flag or you won't be able to run any VM on it.
>
> Best Regards,
> Strahil Nikolov
>
>
>
>
>
>
> В събота, 15 май 2021 г., 05:04:38 ч. Гринуич+3, David Johnson
> написа:
>
>
>
>
>
> When I attempt to install a new host to my cluster from the GUI I get this
> set of errors/warnings, and the install fails.
>
> * Host has no default route
> * The Host CPU does not match the Cluster CPU Tye and is running in a
> degraded mode. It is missing the following CPU flags: vmx,
> model_Cascadelake-Server-noTSX.
>
> The new host has a brand new bare centos 8 installation on it. It
> successfully installed from the internet.
>
> The new host hardware is 48x Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
>
> The pre-existing host is 64x Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz
>
> If I am reading the ansible logs correctly, ansible is failing to find the
> ovirt-hosted-engine-setup package, which is confusing since I have a separate
> physical machine for the engine (which I am using to install from), and don't
> want a self hosted engine.
>
> Any advice would be welcome.
>
>
>
>
> ---
> Ansible logs from the most recent failed installation attempt:
>
> 2021-05-14 20:18:04,949 - runner_service.services.playbook - DEBUG -
> cb_event_handler event_data={'uuid': 'fa961926-9a3a-4d9e-a6bf-d53f98645af2',
> 'counter': 52, 'stdout': 'fatal: [ovirt-host-04.maxisinc.net]: FAILED! =>
> {"changed": false, "failures": ["No package ovirt-hosted-engine-setup
> available."], "msg": "Failed to install some of the specified packages",
> "rc": 1, "results": []}', 'start_line': 44, 'end_line': 45, 'runner_ident':
> '6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'runner_on_failed', 'pid':
> 1742807, 'created': '2021-05-15T01:18:04.947870', 'parent_uuid':
> 'd8cb8a87-894e-e341-1e1c-01a1', 'event_data': {'playbook':
> 'ovirt-host-deploy.yml', 'playbook_uuid':
> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'play': 'all', 'play_uuid':
> 'd8cb8a87-894e-e341-1e1c-0007', 'play_pattern': 'all', 'task':
> 'Install ovirt-hosted-engine-setup package', 'task_uuid':
> 'd8cb8a87-894e-e341-1e1c-01a1', 'task_action': 'yum', 'task_args':
> '', 'task_path':
> '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-vdsm/tasks/packages.yml:6',
> 'role': 'ovirt-host-deploy-vdsm', 'host': 'ovirt-host-04.maxisinc.net',
> 'remote_addr': 'ovirt-host-04.maxisinc.net', 'res': {'msg': 'Failed to
> install some of the specified packages', 'failures': ['No package
> ovirt-hosted-engine-setup available.'], 'results': [], 'rc': 1, 'invocation':
> {'module_args': {'name': ['ovirt-hosted-engine-setup'], 'state': 'present',
> 'allow_downgrade': False, 'autoremove': False, 'bugfix': False,
> 'disable_gpg_check': False, 'disable_plugin': [], 'disablerepo': [],
> 'download_only': False, 'enable_plugin': [], 'enablerepo': [], 'exclude': [],
> 'installroot': '/', 'install_repoquery': True, 'install_weak_deps': True,
> 'security': False, 'skip_broken': False, 'update_cache': False,
> 'update_only': False, 'validate_certs': True, 'lock_timeout': 30,
> 'conf_file': None, 'disable_excludes': None, 'download_dir': None, 'list':
> None, 'releasever': None}}, '_ansible_no_log': False, 'changed': False},
> 'start': '2021-05-15T01:18:03.800468', 'end': '2021-05-15T01:18:04.947696',
> 'duration': 1.147228, 'ignore_errors': None, 'event_loop': None, 'uuid':
> 'fa961926-9a3a-4d9e-a6bf-d53f98645af2'}}
>
> 2021-05-14 20:18:04,951 - runner_service.services.playbook - DEBUG -
> cb_event_handler event_data={'uuid': '1007f755-dee8-407f-999c-b08c8b813ea7',
> 'counter': 53, 'stdout': '\r\nPLAY RECAP
> *\r\novirt-host-04.maxisinc.net
> : ok=14 changed=1 unreachable=0 failed=1 skipped=2 rescued=0
> ignored=0 \r\n', 'start_line': 45, 'end_line': 49, 'runner_ident':
> '6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'playbook_on_stats', 'pid':
> 1742807, 'created': '2021-05-15T01:18:04.949918', 'parent_uuid':
> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'event_data': {'playbook':
>
[ovirt-users] Re: Error Adding host to cluster
Next question ... how do I enable the vmx flag?
My google-fu is failing me here. I find a lot about how to see if its set,
but nothing about how to do it.
Thanks,
*David Johnson*
On Sun, May 16, 2021 at 5:46 AM Strahil Nikolov
wrote:
> Enable VMX flag or you won't be able to run any VM on it.
>
> Best Regards,
> Strahil Nikolov
>
>
>
>
>
>
> В събота, 15 май 2021 г., 05:04:38 ч. Гринуич+3, David Johnson <
> djohn...@maxistechnology.com> написа:
>
>
>
>
>
> When I attempt to install a new host to my cluster from the GUI I get this
> set of errors/warnings, and the install fails.
>
> * Host has no default route
> * The Host CPU does not match the Cluster CPU Tye and is running in a
> degraded mode. It is missing the following CPU flags: vmx,
> model_Cascadelake-Server-noTSX.
>
> The new host has a brand new bare centos 8 installation on it. It
> successfully installed from the internet.
>
> The new host hardware is 48x Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
>
> The pre-existing host is 64x Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz
>
> If I am reading the ansible logs correctly, ansible is failing to find
> the ovirt-hosted-engine-setup package, which is confusing since I have a
> separate physical machine for the engine (which I am using to install
> from), and don't want a self hosted engine.
>
> Any advice would be welcome.
>
>
>
>
> ---
> Ansible logs from the most recent failed installation attempt:
>
> 2021-05-14 20:18:04,949 - runner_service.services.playbook - DEBUG -
> cb_event_handler event_data={'uuid':
> 'fa961926-9a3a-4d9e-a6bf-d53f98645af2', 'counter': 52, 'stdout': 'fatal: [
> ovirt-host-04.maxisinc.net]: FAILED! => {"changed": false, "failures":
> ["No package ovirt-hosted-engine-setup available."], "msg": "Failed to
> install some of the specified packages", "rc": 1, "results": []}',
> 'start_line': 44, 'end_line': 45, 'runner_ident':
> '6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'runner_on_failed', 'pid':
> 1742807, 'created': '2021-05-15T01:18:04.947870', 'parent_uuid':
> 'd8cb8a87-894e-e341-1e1c-01a1', 'event_data': {'playbook':
> 'ovirt-host-deploy.yml', 'playbook_uuid':
> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'play': 'all', 'play_uuid':
> 'd8cb8a87-894e-e341-1e1c-0007', 'play_pattern': 'all', 'task':
> 'Install ovirt-hosted-engine-setup package', 'task_uuid':
> 'd8cb8a87-894e-e341-1e1c-01a1', 'task_action': 'yum', 'task_args':
> '', 'task_path':
> '/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-vdsm/tasks/packages.yml:6',
> 'role': 'ovirt-host-deploy-vdsm', 'host': 'ovirt-host-04.maxisinc.net',
> 'remote_addr': 'ovirt-host-04.maxisinc.net', 'res': {'msg': 'Failed to
> install some of the specified packages', 'failures': ['No package
> ovirt-hosted-engine-setup available.'], 'results': [], 'rc': 1,
> 'invocation': {'module_args': {'name': ['ovirt-hosted-engine-setup'],
> 'state': 'present', 'allow_downgrade': False, 'autoremove': False,
> 'bugfix': False, 'disable_gpg_check': False, 'disable_plugin': [],
> 'disablerepo': [], 'download_only': False, 'enable_plugin': [],
> 'enablerepo': [], 'exclude': [], 'installroot': '/', 'install_repoquery':
> True, 'install_weak_deps': True, 'security': False, 'skip_broken': False,
> 'update_cache': False, 'update_only': False, 'validate_certs': True,
> 'lock_timeout': 30, 'conf_file': None, 'disable_excludes': None,
> 'download_dir': None, 'list': None, 'releasever': None}},
> '_ansible_no_log': False, 'changed': False}, 'start':
> '2021-05-15T01:18:03.800468', 'end': '2021-05-15T01:18:04.947696',
> 'duration': 1.147228, 'ignore_errors': None, 'event_loop': None, 'uuid':
> 'fa961926-9a3a-4d9e-a6bf-d53f98645af2'}}
>
> 2021-05-14 20:18:04,951 - runner_service.services.playbook - DEBUG -
> cb_event_handler event_data={'uuid':
> '1007f755-dee8-407f-999c-b08c8b813ea7', 'counter': 53, 'stdout': '\r\nPLAY
> RECAP
> *\r\
> novirt-host-04.maxisinc.net : ok=14 changed=1unreachable=0
> failed=1skipped=2rescued=0ignored=0 \r\n', 'start_line': 45,
> 'end_line': 49, 'runner_ident': '6060ba26-b51b-11eb-ba6e-d8cb8a87894e',
> 'event': 'playbook_on_stats', 'pid': 1742807, 'created':
> '2021-05-15T01:18:04.949918', 'parent_uuid':
> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'event_data': {'playbook':
> 'ovirt-host-deploy.yml', 'playbook_uuid':
> 'e5595457-2c74-4525-8d98-e34bf2e0e342', 'changed': {'
> ovirt-host-04.maxisinc.net': 1}, 'dark': {}, 'failures': {'
> ovirt-host-04.maxisinc.net': 1}, 'ignored': {}, 'ok': {'
> ovirt-host-04.maxisinc.net': 14}, 'processed': {'
> ovirt-host-04.maxisinc.net': 1}, 'rescued': {}, 'skipped': {'
> ovirt-host-04.maxisinc.net': 2}, 'artifact_data': {}, 'uuid':
> '1007f755-dee8-407f-999c-b08c8b813ea7'}}
> 2021-05-14 20:18:05,147 - runner_service.services.playbook - INFO -
> Playbook ovirt-host-deploy.yml, UUID=6060ba26-b51b-11eb-ba6e-d8cb8a87894e
> ended,
[ovirt-users] Re: Error Adding host to cluster
Enable VMX flag or you won't be able to run any VM on it.
Best Regards,
Strahil Nikolov
В събота, 15 май 2021 г., 05:04:38 ч. Гринуич+3, David Johnson
написа:
When I attempt to install a new host to my cluster from the GUI I get this set
of errors/warnings, and the install fails.
* Host has no default route
* The Host CPU does not match the Cluster CPU Tye and is running in a
degraded mode. It is missing the following CPU flags: vmx,
model_Cascadelake-Server-noTSX.
The new host has a brand new bare centos 8 installation on it. It successfully
installed from the internet.
The new host hardware is 48x Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
The pre-existing host is 64x Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz
If I am reading the ansible logs correctly, ansible is failing to find the
ovirt-hosted-engine-setup package, which is confusing since I have a separate
physical machine for the engine (which I am using to install from), and don't
want a self hosted engine.
Any advice would be welcome.
---
Ansible logs from the most recent failed installation attempt:
2021-05-14 20:18:04,949 - runner_service.services.playbook - DEBUG -
cb_event_handler event_data={'uuid': 'fa961926-9a3a-4d9e-a6bf-d53f98645af2',
'counter': 52, 'stdout': 'fatal: [ovirt-host-04.maxisinc.net]: FAILED! =>
{"changed": false, "failures": ["No package ovirt-hosted-engine-setup
available."], "msg": "Failed to install some of the specified packages", "rc":
1, "results": []}', 'start_line': 44, 'end_line': 45, 'runner_ident':
'6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'runner_on_failed', 'pid':
1742807, 'created': '2021-05-15T01:18:04.947870', 'parent_uuid':
'd8cb8a87-894e-e341-1e1c-01a1', 'event_data': {'playbook':
'ovirt-host-deploy.yml', 'playbook_uuid':
'e5595457-2c74-4525-8d98-e34bf2e0e342', 'play': 'all', 'play_uuid':
'd8cb8a87-894e-e341-1e1c-0007', 'play_pattern': 'all', 'task': 'Install
ovirt-hosted-engine-setup package', 'task_uuid':
'd8cb8a87-894e-e341-1e1c-01a1', 'task_action': 'yum', 'task_args': '',
'task_path':
'/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-vdsm/tasks/packages.yml:6',
'role': 'ovirt-host-deploy-vdsm', 'host': 'ovirt-host-04.maxisinc.net',
'remote_addr': 'ovirt-host-04.maxisinc.net', 'res': {'msg': 'Failed to install
some of the specified packages', 'failures': ['No package
ovirt-hosted-engine-setup available.'], 'results': [], 'rc': 1, 'invocation':
{'module_args': {'name': ['ovirt-hosted-engine-setup'], 'state': 'present',
'allow_downgrade': False, 'autoremove': False, 'bugfix': False,
'disable_gpg_check': False, 'disable_plugin': [], 'disablerepo': [],
'download_only': False, 'enable_plugin': [], 'enablerepo': [], 'exclude': [],
'installroot': '/', 'install_repoquery': True, 'install_weak_deps': True,
'security': False, 'skip_broken': False, 'update_cache': False, 'update_only':
False, 'validate_certs': True, 'lock_timeout': 30, 'conf_file': None,
'disable_excludes': None, 'download_dir': None, 'list': None, 'releasever':
None}}, '_ansible_no_log': False, 'changed': False}, 'start':
'2021-05-15T01:18:03.800468', 'end': '2021-05-15T01:18:04.947696', 'duration':
1.147228, 'ignore_errors': None, 'event_loop': None, 'uuid':
'fa961926-9a3a-4d9e-a6bf-d53f98645af2'}}
2021-05-14 20:18:04,951 - runner_service.services.playbook - DEBUG -
cb_event_handler event_data={'uuid': '1007f755-dee8-407f-999c-b08c8b813ea7',
'counter': 53, 'stdout': '\r\nPLAY RECAP
*\r\novirt-host-04.maxisinc.net
: ok=14 changed=1 unreachable=0 failed=1 skipped=2 rescued=0
ignored=0 \r\n', 'start_line': 45, 'end_line': 49, 'runner_ident':
'6060ba26-b51b-11eb-ba6e-d8cb8a87894e', 'event': 'playbook_on_stats', 'pid':
1742807, 'created': '2021-05-15T01:18:04.949918', 'parent_uuid':
'e5595457-2c74-4525-8d98-e34bf2e0e342', 'event_data': {'playbook':
'ovirt-host-deploy.yml', 'playbook_uuid':
'e5595457-2c74-4525-8d98-e34bf2e0e342', 'changed':
{'ovirt-host-04.maxisinc.net': 1}, 'dark': {}, 'failures':
{'ovirt-host-04.maxisinc.net': 1}, 'ignored': {}, 'ok':
{'ovirt-host-04.maxisinc.net': 14}, 'processed': {'ovirt-host-04.maxisinc.net':
1}, 'rescued': {}, 'skipped': {'ovirt-host-04.maxisinc.net': 2},
'artifact_data': {}, 'uuid': '1007f755-dee8-407f-999c-b08c8b813ea7'}}
2021-05-14 20:18:05,147 - runner_service.services.playbook - INFO - Playbook
ovirt-host-deploy.yml, UUID=6060ba26-b51b-11eb-ba6e-d8cb8a87894e ended,
status=failed
2021-05-14 20:18:05,154 - runner_service.services.playbook - INFO - Playbook
ovirt-host-deploy.yml Stats: {'skipped': {'ovirt-host-04.maxisinc.net': 2},
'ok': {'ovirt-host-04.maxisinc.net': 14}, 'dark': {}, 'failures':
{'ovirt-host-04.maxisinc.net': 1}, 'processed': {'ovirt-host-04.maxisinc.net':
1}, 'changed': {'ovirt-host-04.maxisinc.net': 1}}
David Johnson
[ovirt-users] Re: Error Adding host to cluster
It's better when you post distinct problems in distinct posts. I'll answer on the CPU aspect, which may not be related to the networking topic at all. Sounds like you're adding Haswell parts to a farm that was built on Skylakes. In order for VMs to remain mobile across hosts, oVirt needs to establish a baseline of CPU/instruction set features, that VMs will be let to see, so an application/VM launched on a machine with say AVX512 support won't all of a sudden find itself on a host that doesn't support that (please note that all the various Spectre mitigations resulted in distinct CPU subtypes depending on microcode patches being applied to hosts or not). That's the reason it says in the documentation, that the initial setup should be done on the "oldest" machine, to ensure the proper baseline. In case you add older hardware later, you can lower the base machine type (within some limits) by changing the CPU type in the appropriate cluster. I do believe it requires restarting the management engine to pick up the change. Of course, if you want to actually use those nice new instructions, you'll have to divide your hosts into distinct clusters. With regards to the 'ovirt-hosted-engine-setup' playboook being use to add hosts, that may just be misleading naming. Rest assured it won't try to add a second management engine: that is too complicated to fit into a single playbook. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LKYWXZ6WQ6XWNJKPLK7JL3YHFIH46GZH/
[ovirt-users] Re: Error Adding host to cluster
have you tried installing ovirt packages on the host manually? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MKBTMPK5Y5OXPBVOTN3FQYEBVBWGXJFR/
