[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-28 Thread James Loker-Steele via Users 
The issue was the Bonded Nic i was trying to use.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G7C6JE7RKOMXJDSWQ46755XF2I6HU6UC/

[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-27 Thread James Loker-Steele via Users 
Hi Anton,

I tried without the /24 it threw an error saying it wasn’t a correct cidr 
address 10.93.130.50/64 (it added the /64)

Interesting though, I have manually created the ovirtmgmt bridge interface and 
assigned an IP address to it (as per another post) and it has gone past this 
step now without the /24.

The part I am crashing out on is being unable to resolve the address.  I can 
post the error shortly.
This is strange behaviour as the host can resolve, but I will be adding dns 
addresses to the ovirtmgmt interface and trying again(post didn’t show to add 
them) 

When I installed <4.2 I didn’t get these issues it went smoothly.
The problems seem related to ansible.

Best regards

James
Sent from my iPhone

> On 28 Jul 2020, at 07:25, Anton Louw  wrote:
> 
>  
> 
> Hi James,
>  
> You can remove the “/24” prefix after the IP address for the management VM. 
> You will get prompts to add the netmask and gateway after you add the IP 
> address.
>  
> 
> Anton Louw
> Cloud Engineer: Storage and Virtualization at Vox
> T:  087 805  | D: 087 805 1572
> M: N/A
> E: anton.l...@voxtelecom.co.za
> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> www.vox.co.za
> 
> 
>   
> 
>   
> 
>   
> 
>   
> 
>  
> 
> 
> Disclaimer
> 
> The contents of this email are confidential to the sender and the intended 
> recipient. Unless the contents are clearly and entirely of a personal nature, 
> they are subject to copyright in favour of the holding company of the Vox 
> group of companies. Any recipient who receives this email in error should 
> immediately report the error to the sender and permanently delete this email 
> from all storage devices.
> 
> This email has been scanned for viruses and malware, and may have been 
> automatically archived by Mimecast Ltd, an innovator in Software as a Service 
> (SaaS) for business. Providing a safer and more useful place for your human 
> generated data. Specializing in; Security, archiving and compliance. To find 
> out more Click Here.
> 
> 
> 
> From: James Loker-Steele via Users  
> Sent: 27 July 2020 11:36
> To: users@ovirt.org
> Subject: [ovirt-users] Failed to execute stage 'Environment customization': 
> IPAddress() does not support netmasks or subnet prefixes! See documentation 
> for details.
>  
> Hi All,
> Trying to install a self-hosted engine but cannot get past this step.
> 
> [root@ /]# hosted-engine --deploy
> [ INFO ] Stage: Initializing
> [ INFO ] Stage: Environment setup
> During customization use CTRL-D to abort.
> Continuing will configure this host for serving as hypervisor and will create 
> a local VM with a running engine.
> The locally running engine will be used to configure a new storage domain and 
> create a VM there.
> At the end the disk of the local VM will be moved to the shared storage.
> Are you sure you want to continue? (Yes, No)[Yes]: 
> Configuration files: []
> Log file: 
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log
> Version: otopi-1.8.3 (otopi-1.8.3-1.el7)
> [ INFO ] Stage: Environment packages setup
> [ INFO ] Stage: Programs detection
> [ INFO ] Stage: Environment setup (late)
> [ INFO ] Stage: Environment customization
> 
> --== STORAGE CONFIGURATION ==--
> 
> 
> --== HOST NETWORK CONFIGURATION ==--
> 
> Please indicate the gateway IP address [10.x.x.x]: 
> [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of 
> steps]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing 
> management bridge]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface 
> if management bridge does not exists]
> [ INFO ] skipping: [localhost]
> Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, 
> bond0.60, em1) [em1]: bond0.130
> Please specify which way the network connectivityshould be checked (ping, 
> dns, tcp, none) [dns]: 
> 
> --== VM CONFIGURATION ==--
> 
> Please enter the name of the datacenter where you want to deploy this 
> hosted-engine host. [Default]: 
> Please enter the name of the cluster where you want to deploy this 
> hosted-engine host. [Default]: 
> If you want to deploy with a custom engine appliance image,
> please specify the path to the OVA archive you would like to use
> (leave it empty to skip, the setup will use ovirt-engine-appliance rpm 
> installing it if missing): 
> /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova
> [ INFO ] Checking OVF archive content (could take a few minutes depending on 
> archive

[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-27 Thread Anton Louw via Users 
Hi James,

You can remove the “/24” prefix after the IP address for the management VM. You 
will get prompts to add the netmask and gateway after you add the IP address.


Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za

www.vox.co.za



From: James Loker-Steele via Users 
Sent: 27 July 2020 11:36
To: users@ovirt.org
Subject: [ovirt-users] Failed to execute stage 'Environment customization': 
IPAddress() does not support netmasks or subnet prefixes! See documentation for 
details.

Hi All,
Trying to install a self-hosted engine but cannot get past this step.

[root@ /]# hosted-engine --deploy
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
During customization use CTRL-D to abort.
Continuing will configure this host for serving as hypervisor and will create a 
local VM with a running engine.
The locally running engine will be used to configure a new storage domain and 
create a VM there.
At the end the disk of the local VM will be moved to the shared storage.
Are you sure you want to continue? (Yes, No)[Yes]:
Configuration files: []
Log file: 
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log
Version: otopi-1.8.3 (otopi-1.8.3-1.el7)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup (late)
[ INFO ] Stage: Environment customization

--== STORAGE CONFIGURATION ==--


--== HOST NETWORK CONFIGURATION ==--

Please indicate the gateway IP address [10.x.x.x]:
[ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing 
management bridge]
[ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface 
if management bridge does not exists]
[ INFO ] skipping: [localhost]
Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, bond0.60, 
em1) [em1]: bond0.130
Please specify which way the network connectivityshould be checked (ping, dns, 
tcp, none) [dns]:

--== VM CONFIGURATION ==--

Please enter the name of the datacenter where you want to deploy this 
hosted-engine host. [Default]:
Please enter the name of the cluster where you want to deploy this 
hosted-engine host. [Default]:
If you want to deploy with a custom engine appliance image,
please specify the path to the OVA archive you would like to use
(leave it empty to skip, the setup will use ovirt-engine-appliance rpm 
installing it if missing): 
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova
[ INFO ] Checking OVF archive content (could take a few minutes depending on 
archive size)
[ INFO ] Checking OVF XML content (could take a few minutes depending on 
archive size)
Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF 
value): [4]:
Please specify the memory size of the VM in MB (Defaults to appliance OVF 
value): [4]: 16384
[ INFO ] Detecting host timezone.
Please provide the FQDN you would like to use for the engine.
Note: This will be the FQDN of the engine VM you are now going to launch,
it should not point to the base host or to any other existing machine.
Engine VM FQDN: []: 
Please provide the domain name you would like to use for the engine appliance.
Engine VM domain: []
Enter root password that will be used for the engine appliance:
Confirm appliance root password:
Enter ssh public key for the root user that will be used for the engine 
appliance (leave it empty to skip):
[WARNING] Skipping appliance root ssh public key
Do you want to enable ssh access for the root user (yes, no, without-password) 
[yes]:
Do you want to apply a default OpenSCAP security profile (Yes, No) [No]:
You may specify a unicast MAC address for the VM or accept a randomly generated 
default [00:16:3e:3a:4b:fc]:

How should the engine VM network be configured (DHCP, Static)[DHCP]? static
Please enter the IP address to be used for the engine VM []: 
10.93.130.50/24
[ ERROR ] Failed to execute stage 'Environment customization': IPAddress() does 
not support netmasks or subnet prefixes! See documentation for details.
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
[ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_