Re: [ovirt-users] ovirt hosted-engine deploy never works
You can't migrate the engine to a normal host added via add host. To join the hosted-engine pool, you need to run hosted-engine --deploy and point to the same storage used by the engine. It will then be recognised as adding additional host capable of hosting the engine. See Hosted Engine Howto — oVirt Thanks. | | | | || | | | | | Hosted Engine Howto — oVirt | | | | On Wednesday, September 7, 2016 12:59 AM, Osvaldo ALVAREZ POZO wrote: Hello, Thanks for the reply but i did not understood the following part " Since 4.0 you can also choose to have your new host participating to the hosted-engine pool from the engine itself." it's my first time using ovirt coud you explain? De: "Simone Tiraboschi" À: "alvarez" Cc: "Artyom Lukianov" , "users" Envoyé: Mardi 6 Septembre 2016 18:41:33 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Tue, Sep 6, 2016 at 6:19 PM, Osvaldo ALVAREZ POZO wrote: Hello, Now I have 1 hoste_engine, 1 ovirt-node and 1 cluster How do i add a node to the cluster? Do I go to ovirt-engine and I add a node directly? or are there rpms to install fist? You have just to install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm on your next host.Than you can go to the engine in the hosts section of that cluster and choose New.Since 4.0 you can also choose to have your new host participating to the hosted-engine pool from the engine itself. thanks Sincerily De: "Simone Tiraboschi" À: "alvarez" Cc: "Artyom Lukianov" , "users" Envoyé: Vendredi 2 Septembre 2016 13:38:05 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 12:39 PM, Osvaldo ALVAREZ POZO wrote: Ok, I have a LUN show as unntached. how do I attach it? http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_iSCSI_Data_Domain one other question do have to add the ISCSI LUN where the hosted-engine was deployed? No, the engine will do it automatically once the datacenter will be up. Sincerily De: "Simone Tiraboschi" À: "alvarez" Cc: "Artyom Lukianov" , "users" Envoyé: Vendredi 2 Septembre 2016 12:09:32 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO wrote: Hello , when i connect to hosted_engine web-interface i get "the hosted Engine Storage Domain doesn't exist. it should be imported into the setup". waht does it means? It will be automatically imported once you add your first storage domain for regular VMs. The message is a bit confusing and indeed we have an open bug to change it:https://bugzilla.redhat.com/show_bug.cgi?id=1358313 sincerily InleDe: "Artyom Lukianov" À: "alvarez" Cc: "Simone Tiraboschi" , "users" Envoyé: Jeudi 1 Septembre 2016 16:52:09 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Just run on your host hosted-engine --vm-status. On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO wrote: hello, I managed to install hoste-engine.I think yum localinstall http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm -systemctl enable havegedsystemctl start haveged cat /proc/sys/kernel/random/entropy_avail1888it was helpfull I lost connection for a while to the ovirt-node But I think the hosted-engine vm is not in the iscsi LUN.How can I see where is the VM located? Thanks De: "Simone Tiraboschi" À: "alvarez" Cc: "Gianluca Cecchi" , "users" Envoyé: Jeudi 1 Septembre 2016 12:12:39 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO wrote: Hello, but the problem is that i am not able to finish the hosted_engine deploy. So, I am not able to modify the Vm, because procces stoped :-( thanks for the help Yes, adding entropy to the host should still help. De: "Simone Tiraboschi" À: "Gianluca Cecchi" Cc: "alvarez" , "users" Envoyé: Jeudi 1 Septembre 2016 12:00:22 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi wrote: On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO wrote: hello, but normally it is not possible to install paquets on ovirt nodethat's way I wonder how to install haveged? yum localinstall is this the command? Thanks Actually the haveged workaround is to apply on engine server, tipically when it is deployed as a VM, not the host.HIH,Gianluca The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and Expansion) on virtual machines is quite debated. Having more entropy on the host could also help, but yes, we also have to add a virtio-rng device to the engine
Re: [ovirt-users] ovirt hosted-engine deploy never works
Hello, Thanks for the reply but i did not understood the following part " Since 4.0 you can also choose to have your new host participating to the hosted-engine pool from the engine itself. " it's my first time using ovirt coud you explain? De: "Simone Tiraboschi" À: "alvarez" Cc: "Artyom Lukianov" , "users" Envoyé: Mardi 6 Septembre 2016 18:41:33 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Tue, Sep 6, 2016 at 6:19 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: Hello, Now I have 1 hoste_engine, 1 ovirt-node and 1 cluster How do i add a node to the cluster? Do I go to ovirt-engine and I add a node directly? or are there rpms to install fist? You have just to install [ http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm | http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm ] on your next host. Than you can go to the engine in the hosts section of that cluster and choose New. Since 4.0 you can also choose to have your new host participating to the hosted-engine pool from the engine itself. BQ_BEGIN thanks Sincerily De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Artyom Lukianov" < [ mailto:aluki...@redhat.com | aluki...@redhat.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Vendredi 2 Septembre 2016 13:38:05 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 12:39 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Ok, I have a LUN show as unntached. how do I attach it? BQ_END [ http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_iSCSI_Data_Domain | http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_iSCSI_Data_Domain ] BQ_BEGIN one other question do have to add the ISCSI LUN where the hosted-engine was deployed? BQ_END No, the engine will do it automatically once the datacenter will be up. BQ_BEGIN Sincerily De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Artyom Lukianov" < [ mailto:aluki...@redhat.com | aluki...@redhat.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Vendredi 2 Septembre 2016 12:09:32 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello , when i connect to hosted_engine web-interface i get "the hosted Engine Storage Domain doesn't exist. it should be imported into the setup". waht does it means? BQ_END It will be automatically imported once you add your first storage domain for regular VMs. The message is a bit confusing and indeed we have an open bug to change it: [ https://bugzilla.redhat.com/show_bug.cgi?id=1358313 | https://bugzilla.redhat.com/show_bug.cgi?id=1358313 ] BQ_BEGIN sincerily Inle De: "Artyom Lukianov" < [ mailto:aluki...@redhat.com | aluki...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 16:52:09 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Just run on your host hosted-engine --vm-status. On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, I managed to install hoste-engine. I think yum localinstall [ http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm | http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm ] -systemctl enable haveged systemctl start haveged cat /proc/sys/kernel/random/entropy_avail 1888 it was helpfull I lost connection for a while to the ovirt-node But I think the hosted-engine vm is not in the iscsi LUN. How can I see where is the VM located? Thanks De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] >
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Tue, Sep 6, 2016 at 6:19 PM, Osvaldo ALVAREZ POZO wrote: > Hello, > > Now I have 1 hoste_engine, 1 ovirt-node and 1 cluster > > How do i add a node to the cluster? > > Do I go to ovirt-engine and I add a node directly? or are there rpms to > install fist? > You have just to install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm on your next host. Than you can go to the engine in the hosts section of that cluster and choose New. Since 4.0 you can also choose to have your new host participating to the hosted-engine pool from the engine itself. > > thanks > > Sincerily > > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"Artyom Lukianov" , "users" > *Envoyé: *Vendredi 2 Septembre 2016 13:38:05 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Fri, Sep 2, 2016 at 12:39 PM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> Ok, >> >> I have a LUN show as unntached. >> >> how do I attach it? >> >> > http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_ > iSCSI_Data_Domain > > >> >> one other question >> >> do have to add the ISCSI LUN where the hosted-engine was deployed? >> > > No, the engine will do it automatically once the datacenter will be up. > > >> >> Sincerily >> >> -- >> *De: *"Simone Tiraboschi" >> *À: *"alvarez" >> *Cc: *"Artyom Lukianov" , "users" >> *Envoyé: *Vendredi 2 Septembre 2016 12:09:32 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> >>> Hello , >>> >>> when i connect to hosted_engine web-interface i get "the hosted Engine >>> Storage Domain doesn't exist. it should be imported into the setup". >>> >>> waht does it means? >>> >>> >> It will be automatically imported once you add your first storage domain >> for regular VMs. >> >> The message is a bit confusing and indeed we have an open bug to change >> it: >> https://bugzilla.redhat.com/show_bug.cgi?id=1358313 >> >> >>> sincerily >>> >>> Inle >>> -- >>> *De: *"Artyom Lukianov" >>> *À: *"alvarez" >>> *Cc: *"Simone Tiraboschi" , "users" < >>> users@ovirt.org> >>> *Envoyé: *Jeudi 1 Septembre 2016 16:52:09 >>> >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> Just run on your host hosted-engine --vm-status. >>> >>> On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO < >>> alva...@xtra-mail.fr> wrote: >>> >>>> hello, >>>> >>>> I managed to install hoste-engine. >>>> I think >>>> >>>> yum localinstall http://dl.fedoraproject.org/ >>>> pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm >>>> >>>> -systemctl enable haveged >>>> >>>> systemctl start haveged >>>> >>>> >>>> cat /proc/sys/kernel/random/entropy_avail >>>> >>>> 1888 >>>> it was helpfull >>>> >>>> I lost connection for a while to the ovirt-node >>>> >>>> But I think the hosted-engine vm is not in the iscsi LUN. >>>> How can I see where is the VM located? >>>> >>>> Thanks >>>> >>>> -- >>>> *De: *"Simone Tiraboschi" >>>> *À: *"alvarez" >>>> *Cc: *"Gianluca Cecchi" , "users" < >>>> users@ovirt.org> >>>> *Envoyé: *Jeudi 1 Septembre 2016 12:12:39 >>>> >>>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>>> >>>> >>>> >>>> On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < >>>> alva...@xtra-mail.fr> wrote: >>>> >>>>> Hello, >>>>> >>>>> but the problem is that i am not able to finish the hosted_engine >>>>> deploy. So, I am not able to modify the Vm, because procces stoped :-( >>>>> >
Re: [ovirt-users] ovirt hosted-engine deploy never works
Hello, Now I have 1 hoste_engine, 1 ovirt-node and 1 cluster How do i add a node to the cluster? Do I go to ovirt-engine and I add a node directly? or are there rpms to install fist? thanks Sincerily De: "Simone Tiraboschi" À: "alvarez" Cc: "Artyom Lukianov" , "users" Envoyé: Vendredi 2 Septembre 2016 13:38:05 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 12:39 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: Ok, I have a LUN show as unntached. how do I attach it? [ http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_iSCSI_Data_Domain | http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_iSCSI_Data_Domain ] BQ_BEGIN one other question do have to add the ISCSI LUN where the hosted-engine was deployed? BQ_END No, the engine will do it automatically once the datacenter will be up. BQ_BEGIN Sincerily De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Artyom Lukianov" < [ mailto:aluki...@redhat.com | aluki...@redhat.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Vendredi 2 Septembre 2016 12:09:32 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello , when i connect to hosted_engine web-interface i get "the hosted Engine Storage Domain doesn't exist. it should be imported into the setup". waht does it means? BQ_END It will be automatically imported once you add your first storage domain for regular VMs. The message is a bit confusing and indeed we have an open bug to change it: [ https://bugzilla.redhat.com/show_bug.cgi?id=1358313 | https://bugzilla.redhat.com/show_bug.cgi?id=1358313 ] BQ_BEGIN sincerily Inle De: "Artyom Lukianov" < [ mailto:aluki...@redhat.com | aluki...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 16:52:09 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Just run on your host hosted-engine --vm-status. On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, I managed to install hoste-engine. I think yum localinstall [ http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm | http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm ] -systemctl enable haveged systemctl start haveged cat /proc/sys/kernel/random/entropy_avail 1888 it was helpfull I lost connection for a while to the ovirt-node But I think the hosted-engine vm is not in the iscsi LUN. How can I see where is the VM located? Thanks De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:12:39 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, but the problem is that i am not able to finish the hosted_engine deploy. So, I am not able to modify the Vm, because procces stoped :-( thanks for the help BQ_END Yes, adding entropy to the host should still help. BQ_BEGIN De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > Cc: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:00:22 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > wrote: BQ_BEGIN On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, but
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Fri, Sep 2, 2016 at 12:39 PM, Osvaldo ALVAREZ POZO wrote: > Ok, > > I have a LUN show as unntached. > > how do I attach it? > > http://www.ovirt.org/documentation/quickstart/quickstart-guide/#Create_an_iSCSI_Data_Domain > > one other question > > do have to add the ISCSI LUN where the hosted-engine was deployed? > No, the engine will do it automatically once the datacenter will be up. > > Sincerily > > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"Artyom Lukianov" , "users" > *Envoyé: *Vendredi 2 Septembre 2016 12:09:32 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> >> Hello , >> >> when i connect to hosted_engine web-interface i get "the hosted Engine >> Storage Domain doesn't exist. it should be imported into the setup". >> >> waht does it means? >> >> > It will be automatically imported once you add your first storage domain > for regular VMs. > > The message is a bit confusing and indeed we have an open bug to change it: > https://bugzilla.redhat.com/show_bug.cgi?id=1358313 > > >> sincerily >> >> Inle >> -- >> *De: *"Artyom Lukianov" >> *À: *"alvarez" >> *Cc: *"Simone Tiraboschi" , "users" > > >> *Envoyé: *Jeudi 1 Septembre 2016 16:52:09 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> Just run on your host hosted-engine --vm-status. >> >> On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> hello, >>> >>> I managed to install hoste-engine. >>> I think >>> >>> yum localinstall http://dl.fedoraproject.org/ >>> pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm >>> >>> -systemctl enable haveged >>> >>> systemctl start haveged >>> >>> >>> cat /proc/sys/kernel/random/entropy_avail >>> >>> 1888 >>> it was helpfull >>> >>> I lost connection for a while to the ovirt-node >>> >>> But I think the hosted-engine vm is not in the iscsi LUN. >>> How can I see where is the VM located? >>> >>> Thanks >>> >>> -- >>> *De: *"Simone Tiraboschi" >>> *À: *"alvarez" >>> *Cc: *"Gianluca Cecchi" , "users" < >>> users@ovirt.org> >>> *Envoyé: *Jeudi 1 Septembre 2016 12:12:39 >>> >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> >>> >>> On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < >>> alva...@xtra-mail.fr> wrote: >>> >>>> Hello, >>>> >>>> but the problem is that i am not able to finish the hosted_engine >>>> deploy. So, I am not able to modify the Vm, because procces stoped :-( >>>> >>>> thanks for the help >>>> >>>> >>> Yes, adding entropy to the host should still help. >>> >>> >>>> -- >>>> *De: *"Simone Tiraboschi" >>>> *À: *"Gianluca Cecchi" >>>> *Cc: *"alvarez" , "users" >>>> *Envoyé: *Jeudi 1 Septembre 2016 12:00:22 >>>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>>> >>>> >>>> >>>> On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < >>>> gianluca.cec...@gmail.com> wrote: >>>> >>>>> On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < >>>>> alva...@xtra-mail.fr> wrote: >>>>> >>>>>> hello, >>>>>> >>>>>> but normally it is not possible to install paquets on ovirt node >>>>>> that's way I wonder how to install haveged? >>>>>> >>>>>> yum localinstall is this the command? >>>>>> >>>>>> Thanks >>>>>> >>>>>> >>>>> Actually the haveged workaround is to apply on engine server, >>>>> tipically when it is deployed as a VM, not the host. >>>>> HIH, >>>>> Gianluca >>>>> >>>>> >>>> The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and >>>> Expansion) on virtual machines is quite debated. >>>> Having more entropy on the host could also help, but yes, we also have >>>> to add a virtio-rng device to the engine VM: >>>> https://bugzilla.redhat.com/show_bug.cgi?id=1357246 >>>> >>>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Ok, I have a LUN show as unntached. how do I attach it? one other question do have to add the ISCSI LUN where the hosted-engine was deployed? Sincerily De: "Simone Tiraboschi" À: "alvarez" Cc: "Artyom Lukianov" , "users" Envoyé: Vendredi 2 Septembre 2016 12:09:32 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: Hello , when i connect to hosted_engine web-interface i get "the hosted Engine Storage Domain doesn't exist. it should be imported into the setup". waht does it means? It will be automatically imported once you add your first storage domain for regular VMs. The message is a bit confusing and indeed we have an open bug to change it: [ https://bugzilla.redhat.com/show_bug.cgi?id=1358313 | https://bugzilla.redhat.com/show_bug.cgi?id=1358313 ] BQ_BEGIN sincerily Inle De: "Artyom Lukianov" < [ mailto:aluki...@redhat.com | aluki...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 16:52:09 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Just run on your host hosted-engine --vm-status. On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, I managed to install hoste-engine. I think yum localinstall [ http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm | http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm ] -systemctl enable haveged systemctl start haveged cat /proc/sys/kernel/random/entropy_avail 1888 it was helpfull I lost connection for a while to the ovirt-node But I think the hosted-engine vm is not in the iscsi LUN. How can I see where is the VM located? Thanks De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:12:39 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, but the problem is that i am not able to finish the hosted_engine deploy. So, I am not able to modify the Vm, because procces stoped :-( thanks for the help BQ_END Yes, adding entropy to the host should still help. BQ_BEGIN De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > Cc: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:00:22 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > wrote: BQ_BEGIN On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, but normally it is not possible to install paquets on ovirt node that's way I wonder how to install haveged? yum localinstall is this the command? Thanks BQ_END Actually the haveged workaround is to apply on engine server, tipically when it is deployed as a VM, not the host. HIH, Gianluca BQ_END The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and Expansion) on virtual machines is quite debated. Having more entropy on the host could also help, but yes, we also have to add a virtio-rng device to the engine VM: [ https://bugzilla.redhat.com/show_bug.cgi?id=1357246 | https://bugzilla.redhat.com/show_bug.cgi?id=1357246 ] BQ_END ___ Users mailing list [ mailto:Users@ovirt.org | Users@ovirt.org ] [ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt.org/mailman/listinfo/users ] BQ_END BQ_END ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Fri, Sep 2, 2016 at 11:49 AM, Osvaldo ALVAREZ POZO wrote: > > Hello , > > when i connect to hosted_engine web-interface i get "the hosted Engine > Storage Domain doesn't exist. it should be imported into the setup". > > waht does it means? > > It will be automatically imported once you add your first storage domain for regular VMs. The message is a bit confusing and indeed we have an open bug to change it: https://bugzilla.redhat.com/show_bug.cgi?id=1358313 > sincerily > > Inle > -- > *De: *"Artyom Lukianov" > *À: *"alvarez" > *Cc: *"Simone Tiraboschi" , "users" > *Envoyé: *Jeudi 1 Septembre 2016 16:52:09 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > Just run on your host hosted-engine --vm-status. > > On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO > wrote: > >> hello, >> >> I managed to install hoste-engine. >> I think >> >> yum localinstall http://dl.fedoraproject.org/ >> pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm >> >> -systemctl enable haveged >> >> systemctl start haveged >> >> >> cat /proc/sys/kernel/random/entropy_avail >> >> 1888 >> it was helpfull >> >> I lost connection for a while to the ovirt-node >> >> But I think the hosted-engine vm is not in the iscsi LUN. >> How can I see where is the VM located? >> >> Thanks >> >> -- >> *De: *"Simone Tiraboschi" >> *À: *"alvarez" >> *Cc: *"Gianluca Cecchi" , "users" < >> users@ovirt.org> >> *Envoyé: *Jeudi 1 Septembre 2016 12:12:39 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> Hello, >>> >>> but the problem is that i am not able to finish the hosted_engine >>> deploy. So, I am not able to modify the Vm, because procces stoped :-( >>> >>> thanks for the help >>> >>> >> Yes, adding entropy to the host should still help. >> >> >>> -- >>> *De: *"Simone Tiraboschi" >>> *À: *"Gianluca Cecchi" >>> *Cc: *"alvarez" , "users" >>> *Envoyé: *Jeudi 1 Septembre 2016 12:00:22 >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> >>> >>> On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < >>> gianluca.cec...@gmail.com> wrote: >>> >>>> On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < >>>> alva...@xtra-mail.fr> wrote: >>>> >>>>> hello, >>>>> >>>>> but normally it is not possible to install paquets on ovirt node >>>>> that's way I wonder how to install haveged? >>>>> >>>>> yum localinstall is this the command? >>>>> >>>>> Thanks >>>>> >>>>> >>>> Actually the haveged workaround is to apply on engine server, tipically >>>> when it is deployed as a VM, not the host. >>>> HIH, >>>> Gianluca >>>> >>>> >>> The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and >>> Expansion) on virtual machines is quite debated. >>> Having more entropy on the host could also help, but yes, we also have >>> to add a virtio-rng device to the engine VM: >>> https://bugzilla.redhat.com/show_bug.cgi?id=1357246 >>> >>> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Hello , when i connect to hosted_engine web-interface i get "the hosted Engine Storage Domain doesn't exist. it should be imported into the setup". waht does it means? sincerily Inle De: "Artyom Lukianov" À: "alvarez" Cc: "Simone Tiraboschi" , "users" Envoyé: Jeudi 1 Septembre 2016 16:52:09 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Just run on your host hosted-engine --vm-status. On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: hello, I managed to install hoste-engine. I think yum localinstall [ http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm | http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm ] -systemctl enable haveged systemctl start haveged cat /proc/sys/kernel/random/entropy_avail 1888 it was helpfull I lost connection for a while to the ovirt-node But I think the hosted-engine vm is not in the iscsi LUN. How can I see where is the VM located? Thanks De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:12:39 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, but the problem is that i am not able to finish the hosted_engine deploy. So, I am not able to modify the Vm, because procces stoped :-( thanks for the help Yes, adding entropy to the host should still help. BQ_BEGIN De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > Cc: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:00:22 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > wrote: BQ_BEGIN On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, but normally it is not possible to install paquets on ovirt node that's way I wonder how to install haveged? yum localinstall is this the command? Thanks BQ_END Actually the haveged workaround is to apply on engine server, tipically when it is deployed as a VM, not the host. HIH, Gianluca BQ_END The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and Expansion) on virtual machines is quite debated. Having more entropy on the host could also help, but yes, we also have to add a virtio-rng device to the engine VM: [ https://bugzilla.redhat.com/show_bug.cgi?id=1357246 | https://bugzilla.redhat.com/show_bug.cgi?id=1357246 ] BQ_END ___ Users mailing list [ mailto:Users@ovirt.org | Users@ovirt.org ] [ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt.org/mailman/listinfo/users ] BQ_END ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Just run on your host hosted-engine --vm-status. On Thu, Sep 1, 2016 at 5:47 PM, Osvaldo ALVAREZ POZO wrote: > hello, > > I managed to install hoste-engine. > I think > > yum localinstall http://dl.fedoraproject.org/ > pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm > > -systemctl enable haveged > > systemctl start haveged > > > cat /proc/sys/kernel/random/entropy_avail > > 1888 > it was helpfull > > I lost connection for a while to the ovirt-node > > But I think the hosted-engine vm is not in the iscsi LUN. > How can I see where is the VM located? > > Thanks > > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"Gianluca Cecchi" , "users" < > users@ovirt.org> > *Envoyé: *Jeudi 1 Septembre 2016 12:12:39 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> Hello, >> >> but the problem is that i am not able to finish the hosted_engine deploy. >> So, I am not able to modify the Vm, because procces stoped :-( >> >> thanks for the help >> >> > Yes, adding entropy to the host should still help. > > >> -- >> *De: *"Simone Tiraboschi" >> *À: *"Gianluca Cecchi" >> *Cc: *"alvarez" , "users" >> *Envoyé: *Jeudi 1 Septembre 2016 12:00:22 >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < >> gianluca.cec...@gmail.com> wrote: >> >>> On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < >>> alva...@xtra-mail.fr> wrote: >>> >>>> hello, >>>> >>>> but normally it is not possible to install paquets on ovirt node >>>> that's way I wonder how to install haveged? >>>> >>>> yum localinstall is this the command? >>>> >>>> Thanks >>>> >>>> >>> Actually the haveged workaround is to apply on engine server, tipically >>> when it is deployed as a VM, not the host. >>> HIH, >>> Gianluca >>> >>> >> The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and >> Expansion) on virtual machines is quite debated. >> Having more entropy on the host could also help, but yes, we also have to >> add a virtio-rng device to the engine VM: >> https://bugzilla.redhat.com/show_bug.cgi?id=1357246 >> >> > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
hello, I managed to install hoste-engine. I think yum localinstall http://dl.fedoraproject.org/pub/epel/7/x86_64/h/haveged-1.9.1-1.el7.x86_64.rpm -systemctl enable haveged systemctl start haveged cat /proc/sys/kernel/random/entropy_avail 1888 it was helpfull I lost connection for a while to the ovirt-node But I think the hosted-engine vm is not in the iscsi LUN. How can I see where is the VM located? Thanks De: "Simone Tiraboschi" À: "alvarez" Cc: "Gianluca Cecchi" , "users" Envoyé: Jeudi 1 Septembre 2016 12:12:39 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: Hello, but the problem is that i am not able to finish the hosted_engine deploy. So, I am not able to modify the Vm, because procces stoped :-( thanks for the help Yes, adding entropy to the host should still help. BQ_BEGIN De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "Gianluca Cecchi" < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > Cc: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] >, "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 12:00:22 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > wrote: BQ_BEGIN On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, but normally it is not possible to install paquets on ovirt node that's way I wonder how to install haveged? yum localinstall is this the command? Thanks BQ_END Actually the haveged workaround is to apply on engine server, tipically when it is deployed as a VM, not the host. HIH, Gianluca BQ_END The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and Expansion) on virtual machines is quite debated. Having more entropy on the host could also help, but yes, we also have to add a virtio-rng device to the engine VM: [ https://bugzilla.redhat.com/show_bug.cgi?id=1357246 | https://bugzilla.redhat.com/show_bug.cgi?id=1357246 ] BQ_END ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 12:06 PM, Osvaldo ALVAREZ POZO wrote: > Hello, > > but the problem is that i am not able to finish the hosted_engine deploy. > So, I am not able to modify the Vm, because procces stoped :-( > > thanks for the help > > Yes, adding entropy to the host should still help. > -- > *De: *"Simone Tiraboschi" > *À: *"Gianluca Cecchi" > *Cc: *"alvarez" , "users" > *Envoyé: *Jeudi 1 Septembre 2016 12:00:22 > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < > gianluca.cec...@gmail.com> wrote: > >> On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> hello, >>> >>> but normally it is not possible to install paquets on ovirt node >>> that's way I wonder how to install haveged? >>> >>> yum localinstall is this the command? >>> >>> Thanks >>> >>> >> Actually the haveged workaround is to apply on engine server, tipically >> when it is deployed as a VM, not the host. >> HIH, >> Gianluca >> >> > The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and > Expansion) on virtual machines is quite debated. > Having more entropy on the host could also help, but yes, we also have to > add a virtio-rng device to the engine VM: > https://bugzilla.redhat.com/show_bug.cgi?id=1357246 > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Hello, but the problem is that i am not able to finish the hosted_engine deploy. So, I am not able to modify the Vm, because procces stoped :-( thanks for the help De: "Simone Tiraboschi" À: "Gianluca Cecchi" Cc: "alvarez" , "users" Envoyé: Jeudi 1 Septembre 2016 12:00:22 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi < [ mailto:gianluca.cec...@gmail.com | gianluca.cec...@gmail.com ] > wrote: On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, but normally it is not possible to install paquets on ovirt node that's way I wonder how to install haveged? yum localinstall is this the command? Thanks Actually the haveged workaround is to apply on engine server, tipically when it is deployed as a VM, not the host. HIH, Gianluca BQ_END The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and Expansion) on virtual machines is quite debated. Having more entropy on the host could also help, but yes, we also have to add a virtio-rng device to the engine VM: [ https://bugzilla.redhat.com/show_bug.cgi?id=1357246 | https://bugzilla.redhat.com/show_bug.cgi?id=1357246 ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 11:48 AM, Gianluca Cecchi wrote: > On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> hello, >> >> but normally it is not possible to install paquets on ovirt node >> that's way I wonder how to install haveged? >> >> yum localinstall is this the command? >> >> Thanks >> >> > Actually the haveged workaround is to apply on engine server, tipically > when it is deployed as a VM, not the host. > HIH, > Gianluca > > The effectiveness of HAVEGE (HArdware Volatile Entropy Gathering and Expansion) on virtual machines is quite debated. Having more entropy on the host could also help, but yes, we also have to add a virtio-rng device to the engine VM: https://bugzilla.redhat.com/show_bug.cgi?id=1357246 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Hello, this is the output of yum install haveged yum install haveged Loaded plugins: fastestmirror, imgbased-warning Warning: yum operations are not persisted across upgrades! centos-ovirt40-release | 3.4 kB 00:00 ovirt-4.0 | 2.9 kB 00:00 ovirt-4.0-centos-gluster37 | 2.9 kB 00:00 ovirt-4.0-epel/x86_64/metalink | 22 kB 00:00 ovirt-4.0-epel | 4.3 kB 00:00 ovirt-4.0-patternfly1-noarch-epel | 3.0 kB 00:00 virtio-win-stable | 3.0 kB 00:00 (1/8): ovirt-4.0-centos-gluster37/x86_64/primary_db | 60 kB 00:00 (2/8): ovirt-4.0-epel/x86_64/group_gz | 170 kB 00:00 (3/8): ovirt-4.0-epel/x86_64/updateinfo | 618 kB 00:00 (4/8): centos-ovirt40-release/primary_db | 32 kB 00:00 (5/8): ovirt-4.0-patternfly1-noarch-epel/x86_64/primary_db | 2.2 kB 00:00 (6/8): ovirt-4.0/7/primary_db | 173 kB 00:00 (7/8): virtio-win-stable/primary_db | 2.0 kB 00:00 (8/8): ovirt-4.0-epel/x86_64/primary_db | 4.3 MB 00:01 Determining fastest mirrors * ovirt-4.0: ftp.nluug.nl * ovirt-4.0-epel: mir01.syntis.net No package haveged available. Sincerily Inle De: "alvarez" À: "Simone Tiraboschi" Cc: "users" Envoyé: Jeudi 1 Septembre 2016 11:39:02 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works hello, but normally it is not possible to install paquets on ovirt node that's way I wonder how to install haveged? yum localinstall is this the command? Thanks De: "Simone Tiraboschi" À: "alvarez" Cc: "users" Envoyé: Jeudi 1 Septembre 2016 11:17:38 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:12 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: hello, thanks very much yum installlocal haveged right ? It is a ovirt-node 4 You have also to enable and start it if you didn't BQ_BEGIN thanks De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 10:29:44 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 10:08 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, wath could be a reasonable level? 1000? BQ_END Yes, I think so. BQ_BEGIN do you have a procedure for this? BQ_END If haveged is enough for you, yum install haveged systemctl enable haveged systemctl start haveged and wait till /proc/sys/kernel/random/entropy_avail goes back to a reasonable value. BQ_BEGIN thanks Sincerily De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:58:38 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, Thanks for hte fast reply. cat /proc/sys/kernel/random/entropy_avail 133 BQ_END Ok, the issue is definitively here: You can try installing the haveged deamon or any other method to keep entropy at a reasonable level. BQ_BEGIN it is a physical server Poweredge R710 thanks inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:13:45 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, Thanks for all the answers. In attachments the log file BQ_END It's taking a long time on this step executing engine-setup on the engine VM: 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] Creating/refreshing Engine 'internal' domain database schema 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/engine/health.py", line 132, in _closeup line, timeout = self._appliance_readline_nb(TIMEOUT) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.p
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO wrote: > hello, > > but normally it is not possible to install paquets on ovirt node > that's way I wonder how to install haveged? > > yum localinstall is this the command? > > Thanks > > Actually the haveged workaround is to apply on engine server, tipically when it is deployed as a VM, not the host. HIH, Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 11:39 AM, Osvaldo ALVAREZ POZO wrote: > hello, > > but normally it is not possible to install paquets on ovirt node > that's way I wonder how to install haveged? > on oVirt node 4 it's possible. Adding Fabian: is it common to get so low levels of entropy on a node bare metal host? What's consuming it? Osvaldo, does your hardware support hardware random generator? > > yum localinstall is this the command? > > Thanks > > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"users" > *Envoyé: *Jeudi 1 Septembre 2016 11:17:38 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Thu, Sep 1, 2016 at 11:12 AM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> hello, >> >> thanks very much >> >> yum installlocal haveged >> >> right ? It is a ovirt-node 4 >> >> > You have also to enable and start it if you didn't > > >> thanks >> >> ------ >> *De: *"Simone Tiraboschi" >> *À: *"alvarez" >> *Cc: *"users" >> *Envoyé: *Jeudi 1 Septembre 2016 10:29:44 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Thu, Sep 1, 2016 at 10:08 AM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> hello, >>> >>> wath could be a reasonable level? 1000? >>> >> >> Yes, I think so. >> >> >>> >>> do you have a procedure for this? >>> >> >> If haveged is enough for you, >>yum install haveged >>systemctl enable haveged >>systemctl start haveged >> and wait till /proc/sys/kernel/random/entropy_avail goes back to a >> reasonable value. >> >> >>> >>> thanks >>> >>> Sincerily >>> >>> -- >>> *De: *"Simone Tiraboschi" >>> *À: *"alvarez" >>> *Cc: *"users" >>> *Envoyé: *Jeudi 1 Septembre 2016 09:58:38 >>> >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> >>> >>> On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO < >>> alva...@xtra-mail.fr> wrote: >>> >>>> >>>> Hello, >>>> Thanks for hte fast reply. >>>> >>>> cat /proc/sys/kernel/random/entropy_avail >>>> 133 >>>> >>>> >>> Ok, the issue is definitively here: >>> You can try installing the haveged deamon or any other method to keep >>> entropy at a reasonable level. >>> >>> >>>> >>>> it is a physical server Poweredge R710 >>>> >>>> thanks >>>> >>>> inle >>>> -- >>>> *De: *"Simone Tiraboschi" >>>> *À: *"alvarez" >>>> *Cc: *"users" >>>> *Envoyé: *Jeudi 1 Septembre 2016 09:13:45 >>>> >>>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>>> >>>> >>>> >>>> On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < >>>> alva...@xtra-mail.fr> wrote: >>>> >>>>> >>>>> hello, >>>>> >>>>> Thanks for all the answers. >>>>> In attachments the log file >>>>> >>>>> >>>> >>>> It's taking a long time on this step executing engine-setup on the >>>> engine VM: >>>> >>>> 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine >>>> dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] >>>> Creating/refreshing Engine 'internal' domain database schema >>>> 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 >>>> method exception >>>> Traceback (most recent call last): >>>> File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, >>>> in _executeMethod >>>> method['method']() >>>> File "/usr/share/ovirt-hosted-engine-setup/scripts/../ >>>> plugins/gr-he-common/engine/health.py", line 132, in _closeup >>>> line, timeout = self._appliance_readline_nb(TIMEOUT) >>>> File >>>>
Re: [ovirt-users] ovirt hosted-engine deploy never works
hello, but normally it is not possible to install paquets on ovirt node that's way I wonder how to install haveged? yum localinstall is this the command? Thanks De: "Simone Tiraboschi" À: "alvarez" Cc: "users" Envoyé: Jeudi 1 Septembre 2016 11:17:38 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 11:12 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: hello, thanks very much yum installlocal haveged right ? It is a ovirt-node 4 You have also to enable and start it if you didn't BQ_BEGIN thanks De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 10:29:44 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 10:08 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, wath could be a reasonable level? 1000? BQ_END Yes, I think so. BQ_BEGIN do you have a procedure for this? BQ_END If haveged is enough for you, yum install haveged systemctl enable haveged systemctl start haveged and wait till /proc/sys/kernel/random/entropy_avail goes back to a reasonable value. BQ_BEGIN thanks Sincerily De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:58:38 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, Thanks for hte fast reply. cat /proc/sys/kernel/random/entropy_avail 133 BQ_END Ok, the issue is definitively here: You can try installing the haveged deamon or any other method to keep entropy at a reasonable level. BQ_BEGIN it is a physical server Poweredge R710 thanks inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:13:45 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, Thanks for all the answers. In attachments the log file BQ_END It's taking a long time on this step executing engine-setup on the engine VM: 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] Creating/refreshing Engine 'internal' domain database schema 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/engine/health.py", line 132, in _closeup line, timeout = self._appliance_readline_nb(TIMEOUT) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", line 107, in _appliance_readline_nb timeout File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG1 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed to execute stage 'Closing up': SIG1 In this step engine-setup is requiring a lot of entropy for cryptographic actions so a similar delay could be due to the lack of entropy on your system. Can you please check the entropy on your host? cat /proc/sys/kernel/random/entropy_avail is it a nested env? BQ_BEGIN Thanks inle De: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > À: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > Envoyé: Mercredi 31 Août 2016 14:45:53 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Hello, I am re-installing in orther to do the experience again. the hostname is resolvable the dns server is in same network segment. Sincerily Inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 11:12 AM, Osvaldo ALVAREZ POZO wrote: > hello, > > thanks very much > > yum installlocal haveged > > right ? It is a ovirt-node 4 > > You have also to enable and start it if you didn't > thanks > > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"users" > *Envoyé: *Jeudi 1 Septembre 2016 10:29:44 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Thu, Sep 1, 2016 at 10:08 AM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> hello, >> >> wath could be a reasonable level? 1000? >> > > Yes, I think so. > > >> >> do you have a procedure for this? >> > > If haveged is enough for you, >yum install haveged >systemctl enable haveged >systemctl start haveged > and wait till /proc/sys/kernel/random/entropy_avail goes back to a > reasonable value. > > >> >> thanks >> >> Sincerily >> >> -- >> *De: *"Simone Tiraboschi" >> *À: *"alvarez" >> *Cc: *"users" >> *Envoyé: *Jeudi 1 Septembre 2016 09:58:38 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> >>> Hello, >>> Thanks for hte fast reply. >>> >>> cat /proc/sys/kernel/random/entropy_avail >>> 133 >>> >>> >> Ok, the issue is definitively here: >> You can try installing the haveged deamon or any other method to keep >> entropy at a reasonable level. >> >> >>> >>> it is a physical server Poweredge R710 >>> >>> thanks >>> >>> inle >>> -- >>> *De: *"Simone Tiraboschi" >>> *À: *"alvarez" >>> *Cc: *"users" >>> *Envoyé: *Jeudi 1 Septembre 2016 09:13:45 >>> >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> >>> >>> On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < >>> alva...@xtra-mail.fr> wrote: >>> >>>> >>>> hello, >>>> >>>> Thanks for all the answers. >>>> In attachments the log file >>>> >>>> >>> >>> It's taking a long time on this step executing engine-setup on the >>> engine VM: >>> >>> 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine >>> dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] >>> Creating/refreshing Engine 'internal' domain database schema >>> 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 >>> method exception >>> Traceback (most recent call last): >>> File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, >>> in _executeMethod >>> method['method']() >>> File "/usr/share/ovirt-hosted-engine-setup/scripts/../ >>> plugins/gr-he-common/engine/health.py", line 132, in _closeup >>> line, timeout = self._appliance_readline_nb(TIMEOUT) >>> File >>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", >>> line 107, in _appliance_readline_nb >>> timeout >>> File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in >>> _signal >>> raise RuntimeError("SIG%s" % signum) >>> RuntimeError: SIG1 >>> 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 >>> Failed to execute stage 'Closing up': SIG1 >>> >>> In this step engine-setup is requiring a lot of entropy for >>> cryptographic actions so a similar delay could be due to the lack of >>> entropy on your system. >>> >>> Can you please check the entropy on your host? >>> cat /proc/sys/kernel/random/entropy_avail >>> is it a nested env? >>> >>> >>>> Thanks >>>> >>>> inle >>>> -- >>>> *De: *"alvarez" >>>> *À: *"Simone Tiraboschi" >>>> *Envoyé: *Mercredi 31 Août 2016 14:45:53 >>>> >>>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>>> >>>> Hello,
Re: [ovirt-users] ovirt hosted-engine deploy never works
hello, thanks very much yum installlocal haveged right ? It is a ovirt-node 4 thanks De: "Simone Tiraboschi" À: "alvarez" Cc: "users" Envoyé: Jeudi 1 Septembre 2016 10:29:44 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 10:08 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: hello, wath could be a reasonable level? 1000? Yes, I think so. BQ_BEGIN do you have a procedure for this? BQ_END If haveged is enough for you, yum install haveged systemctl enable haveged systemctl start haveged and wait till /proc/sys/kernel/random/entropy_avail goes back to a reasonable value. BQ_BEGIN thanks Sincerily De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:58:38 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, Thanks for hte fast reply. cat /proc/sys/kernel/random/entropy_avail 133 BQ_END Ok, the issue is definitively here: You can try installing the haveged deamon or any other method to keep entropy at a reasonable level. BQ_BEGIN it is a physical server Poweredge R710 thanks inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:13:45 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, Thanks for all the answers. In attachments the log file BQ_END It's taking a long time on this step executing engine-setup on the engine VM: 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] Creating/refreshing Engine 'internal' domain database schema 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/engine/health.py", line 132, in _closeup line, timeout = self._appliance_readline_nb(TIMEOUT) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", line 107, in _appliance_readline_nb timeout File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG1 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed to execute stage 'Closing up': SIG1 In this step engine-setup is requiring a lot of entropy for cryptographic actions so a similar delay could be due to the lack of entropy on your system. Can you please check the entropy on your host? cat /proc/sys/kernel/random/entropy_avail is it a nested env? BQ_BEGIN Thanks inle De: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > À: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > Envoyé: Mercredi 31 Août 2016 14:45:53 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Hello, I am re-installing in orther to do the experience again. the hostname is resolvable the dns server is in same network segment. Sincerily Inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Mercredi 31 Août 2016 14:26:31 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) from cockpit web interface. I have: -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7.centos.noarch I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 and nic4 for ISCSi I have the ovirt-node ip on nic1. Any time I try t
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 10:08 AM, Osvaldo ALVAREZ POZO wrote: > hello, > > wath could be a reasonable level? 1000? > Yes, I think so. > > do you have a procedure for this? > If haveged is enough for you, yum install haveged systemctl enable haveged systemctl start haveged and wait till /proc/sys/kernel/random/entropy_avail goes back to a reasonable value. > > thanks > > Sincerily > > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"users" > *Envoyé: *Jeudi 1 Septembre 2016 09:58:38 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO > wrote: > >> >> Hello, >> Thanks for hte fast reply. >> >> cat /proc/sys/kernel/random/entropy_avail >> 133 >> >> > Ok, the issue is definitively here: > You can try installing the haveged deamon or any other method to keep > entropy at a reasonable level. > > >> >> it is a physical server Poweredge R710 >> >> thanks >> >> inle >> -- >> *De: *"Simone Tiraboschi" >> *À: *"alvarez" >> *Cc: *"users" >> *Envoyé: *Jeudi 1 Septembre 2016 09:13:45 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> >>> hello, >>> >>> Thanks for all the answers. >>> In attachments the log file >>> >>> >> >> It's taking a long time on this step executing engine-setup on the engine >> VM: >> >> 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine >> dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] >> Creating/refreshing Engine 'internal' domain database schema >> 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method >> exception >> Traceback (most recent call last): >> File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in >> _executeMethod >> method['method']() >> File "/usr/share/ovirt-hosted-engine-setup/scripts/../ >> plugins/gr-he-common/engine/health.py", line 132, in _closeup >> line, timeout = self._appliance_readline_nb(TIMEOUT) >> File >> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", >> line 107, in _appliance_readline_nb >> timeout >> File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in >> _signal >> raise RuntimeError("SIG%s" % signum) >> RuntimeError: SIG1 >> 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed >> to execute stage 'Closing up': SIG1 >> >> In this step engine-setup is requiring a lot of entropy for cryptographic >> actions so a similar delay could be due to the lack of entropy on your >> system. >> >> Can you please check the entropy on your host? >> cat /proc/sys/kernel/random/entropy_avail >> is it a nested env? >> >> >>> Thanks >>> >>> inle >>> -- >>> *De: *"alvarez" >>> *À: *"Simone Tiraboschi" >>> *Envoyé: *Mercredi 31 Août 2016 14:45:53 >>> >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> Hello, >>> >>> I am re-installing in orther to do the experience again. >>> >>> the hostname is resolvable the dns server is in same network segment. >>> >>> Sincerily >>> >>> Inle >>> >>> -- >>> *De: *"Simone Tiraboschi" >>> *À: *"alvarez" >>> *Cc: *"users" >>> *Envoyé: *Mercredi 31 Août 2016 14:26:31 >>> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >>> >>> >>> >>> On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO < >>> alva...@xtra-mail.fr> wrote: >>> >>>> Hello, >>>> >>>> I am trying to deploy ovirt hosted-engine (over iscsi, i do not have >>>> NFS) from cockpit web interface. >>>> I have: >>>> -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) >>>> -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7. >>>>
Re: [ovirt-users] ovirt hosted-engine deploy never works
hello, wath could be a reasonable level? 1000? do you have a procedure for this? thanks Sincerily De: "Simone Tiraboschi" À: "alvarez" Cc: "users" Envoyé: Jeudi 1 Septembre 2016 09:58:38 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: Hello, Thanks for hte fast reply. cat /proc/sys/kernel/random/entropy_avail 133 Ok, the issue is definitively here: You can try installing the haveged deamon or any other method to keep entropy at a reasonable level. BQ_BEGIN it is a physical server Poweredge R710 thanks inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Jeudi 1 Septembre 2016 09:13:45 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN hello, Thanks for all the answers. In attachments the log file BQ_END It's taking a long time on this step executing engine-setup on the engine VM: 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] Creating/refreshing Engine 'internal' domain database schema 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/engine/health.py", line 132, in _closeup line, timeout = self._appliance_readline_nb(TIMEOUT) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", line 107, in _appliance_readline_nb timeout File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG1 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed to execute stage 'Closing up': SIG1 In this step engine-setup is requiring a lot of entropy for cryptographic actions so a similar delay could be due to the lack of entropy on your system. Can you please check the entropy on your host? cat /proc/sys/kernel/random/entropy_avail is it a nested env? BQ_BEGIN Thanks inle De: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > À: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > Envoyé: Mercredi 31 Août 2016 14:45:53 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Hello, I am re-installing in orther to do the experience again. the hostname is resolvable the dns server is in same network segment. Sincerily Inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Mercredi 31 Août 2016 14:26:31 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) from cockpit web interface. I have: -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7.centos.noarch I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 and nic4 for ISCSi I have the ovirt-node ip on nic1. Any time I try to deploy ovirt hosted engine from ovirt-node cockpit interface the result is the same, I receive a "time out message", and the ovirt-node cockpit web interface does not work anymore. The documentation does not talk about network card requirement I do not know where to look. should I use nic2 instead of nic1 when deploying hosted-engine? Any advice? BQ_END I suspect that you hist [ https://bugzilla.redhat.com/show_bug.cgi?id=1358530 | https://bugzilla.redhat.com/show_bug.cgi?id=1358530 ] Can you please check if the hostname of your host is correctly resolvable? BQ_BEGIN Thanks Inle ___ Users mailing list [ mailto:Users@ovirt.org | Users@ovirt.org ] [ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 9:36 AM, Osvaldo ALVAREZ POZO wrote: > > Hello, > Thanks for hte fast reply. > > cat /proc/sys/kernel/random/entropy_avail > 133 > > Ok, the issue is definitively here: You can try installing the haveged deamon or any other method to keep entropy at a reasonable level. > > it is a physical server Poweredge R710 > > thanks > > inle > -- > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"users" > *Envoyé: *Jeudi 1 Septembre 2016 09:13:45 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO > wrote: > >> >> hello, >> >> Thanks for all the answers. >> In attachments the log file >> >> > > It's taking a long time on this step executing engine-setup on the engine > VM: > > 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine > dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] > Creating/refreshing Engine 'internal' domain database schema > 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method > exception > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in > _executeMethod > method['method']() > File "/usr/share/ovirt-hosted-engine-setup/scripts/../ > plugins/gr-he-common/engine/health.py", line 132, in _closeup > line, timeout = self._appliance_readline_nb(TIMEOUT) > File > "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", > line 107, in _appliance_readline_nb > timeout > File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in > _signal > raise RuntimeError("SIG%s" % signum) > RuntimeError: SIG1 > 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed > to execute stage 'Closing up': SIG1 > > In this step engine-setup is requiring a lot of entropy for cryptographic > actions so a similar delay could be due to the lack of entropy on your > system. > > Can you please check the entropy on your host? > cat /proc/sys/kernel/random/entropy_avail > is it a nested env? > > >> Thanks >> >> inle >> -- >> *De: *"alvarez" >> *À: *"Simone Tiraboschi" >> *Envoyé: *Mercredi 31 Août 2016 14:45:53 >> >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> Hello, >> >> I am re-installing in orther to do the experience again. >> >> the hostname is resolvable the dns server is in same network segment. >> >> Sincerily >> >> Inle >> >> -- >> *De: *"Simone Tiraboschi" >> *À: *"alvarez" >> *Cc: *"users" >> *Envoyé: *Mercredi 31 Août 2016 14:26:31 >> *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works >> >> >> >> On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO < >> alva...@xtra-mail.fr> wrote: >> >>> Hello, >>> >>> I am trying to deploy ovirt hosted-engine (over iscsi, i do not have >>> NFS) from cockpit web interface. >>> I have: >>> -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) >>> -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7. >>> centos.noarch >>> >>> I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 >>> and nic4 for ISCSi >>> I have the ovirt-node ip on nic1. >>> >>> Any time I try to deploy ovirt hosted engine from ovirt-node cockpit >>> interface the result is the same, I receive a "time out message", and the >>> ovirt-node cockpit web interface does not work anymore. >>> >>> The documentation does not talk about network card requirement I do not >>> know where to look. >>> >>> should I use nic2 instead of nic1 when deploying hosted-engine? >>> >>> Any advice? >>> >> >> I suspect that you hist https://bugzilla.redhat. >> com/show_bug.cgi?id=1358530 >> >> Can you please check if the hostname of your host is correctly >> resolvable? >> >> >>> >>> Thanks >>> >>> Inle >>> >>> >>> >>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Hello, Thanks for hte fast reply. cat /proc/sys/kernel/random/entropy_avail 133 it is a physical server Poweredge R710 thanks inle De: "Simone Tiraboschi" À: "alvarez" Cc: "users" Envoyé: Jeudi 1 Septembre 2016 09:13:45 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: hello, Thanks for all the answers. In attachments the log file It's taking a long time on this step executing engine-setup on the engine VM: 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] Creating/refreshing Engine 'internal' domain database schema 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/engine/health.py", line 132, in _closeup line, timeout = self._appliance_readline_nb(TIMEOUT) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", line 107, in _appliance_readline_nb timeout File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG1 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed to execute stage 'Closing up': SIG1 In this step engine-setup is requiring a lot of entropy for cryptographic actions so a similar delay could be due to the lack of entropy on your system. Can you please check the entropy on your host? cat /proc/sys/kernel/random/entropy_avail is it a nested env? BQ_BEGIN Thanks inle De: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > À: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > Envoyé: Mercredi 31 Août 2016 14:45:53 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works Hello, I am re-installing in orther to do the experience again. the hostname is resolvable the dns server is in same network segment. Sincerily Inle De: "Simone Tiraboschi" < [ mailto:stira...@redhat.com | stira...@redhat.com ] > À: "alvarez" < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > Cc: "users" < [ mailto:users@ovirt.org | users@ovirt.org ] > Envoyé: Mercredi 31 Août 2016 14:26:31 Objet: Re: [ovirt-users] ovirt hosted-engine deploy never works On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO < [ mailto:alva...@xtra-mail.fr | alva...@xtra-mail.fr ] > wrote: BQ_BEGIN Hello, I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) from cockpit web interface. I have: -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7.centos.noarch I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 and nic4 for ISCSi I have the ovirt-node ip on nic1. Any time I try to deploy ovirt hosted engine from ovirt-node cockpit interface the result is the same, I receive a "time out message", and the ovirt-node cockpit web interface does not work anymore. The documentation does not talk about network card requirement I do not know where to look. should I use nic2 instead of nic1 when deploying hosted-engine? Any advice? BQ_END I suspect that you hist [ https://bugzilla.redhat.com/show_bug.cgi?id=1358530 | https://bugzilla.redhat.com/show_bug.cgi?id=1358530 ] Can you please check if the hostname of your host is correctly resolvable? BQ_BEGIN Thanks Inle ___ Users mailing list [ mailto:Users@ovirt.org | Users@ovirt.org ] [ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt.org/mailman/listinfo/users ] BQ_END ___ Users mailing list [ mailto:Users@ovirt.org | Users@ovirt.org ] [ http://lists.ovirt.org/mailman/listinfo/users | http://lists.ovirt.org/mailman/listinfo/users ] BQ_END ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Thu, Sep 1, 2016 at 8:53 AM, Osvaldo ALVAREZ POZO wrote: > > hello, > > Thanks for all the answers. > In attachments the log file > > It's taking a long time on this step executing engine-setup on the engine VM: 2016-08-31 19:11:53 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:204 DIALOG:SEND ### |- [ INFO ] Creating/refreshing Engine 'internal' domain database schema 2016-08-31 19:15:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/engine/health.py", line 132, in _closeup line, timeout = self._appliance_readline_nb(TIMEOUT) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/appliance_esetup.py", line 107, in _appliance_readline_nb timeout File "/usr/lib/python2.7/site-packages/otopi/main.py", line 48, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG1 2016-08-31 19:15:15 ERROR otopi.context context._executeMethod:151 Failed to execute stage 'Closing up': SIG1 In this step engine-setup is requiring a lot of entropy for cryptographic actions so a similar delay could be due to the lack of entropy on your system. Can you please check the entropy on your host? cat /proc/sys/kernel/random/entropy_avail is it a nested env? > Thanks > > inle > ------ > *De: *"alvarez" > *À: *"Simone Tiraboschi" > *Envoyé: *Mercredi 31 Août 2016 14:45:53 > > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > Hello, > > I am re-installing in orther to do the experience again. > > the hostname is resolvable the dns server is in same network segment. > > Sincerily > > Inle > > ------ > *De: *"Simone Tiraboschi" > *À: *"alvarez" > *Cc: *"users" > *Envoyé: *Mercredi 31 Août 2016 14:26:31 > *Objet: *Re: [ovirt-users] ovirt hosted-engine deploy never works > > > > On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO < > alva...@xtra-mail.fr> wrote: > >> Hello, >> >> I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) >> from cockpit web interface. >> I have: >> -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) >> -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7. >> centos.noarch >> >> I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 >> and nic4 for ISCSi >> I have the ovirt-node ip on nic1. >> >> Any time I try to deploy ovirt hosted engine from ovirt-node cockpit >> interface the result is the same, I receive a "time out message", and the >> ovirt-node cockpit web interface does not work anymore. >> >> The documentation does not talk about network card requirement I do not >> know where to look. >> >> should I use nic2 instead of nic1 when deploying hosted-engine? >> >> Any advice? >> > > I suspect that you hist https://bugzilla.redhat. > com/show_bug.cgi?id=1358530 > > Can you please check if the hostname of your host is correctly resolvable? > > >> >> Thanks >> >> Inle >> >> >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
On Wed, Aug 31, 2016 at 12:27 PM, Osvaldo ALVAREZ POZO wrote: > Hello, > > I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) > from cockpit web interface. > I have: > -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) > -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7. > centos.noarch > > I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 > and nic4 for ISCSi > I have the ovirt-node ip on nic1. > > Any time I try to deploy ovirt hosted engine from ovirt-node cockpit > interface the result is the same, I receive a "time out message", and the > ovirt-node cockpit web interface does not work anymore. > > The documentation does not talk about network card requirement I do not > know where to look. > > should I use nic2 instead of nic1 when deploying hosted-engine? > > Any advice? > I suspect that you hist https://bugzilla.redhat.com/show_bug.cgi?id=1358530 Can you please check if the hostname of your host is correctly resolvable? > > Thanks > > Inle > > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt hosted-engine deploy never works
Please attach the HE setup log(/var/log/ovirt-hosted-engine-setup/). On Wed, Aug 31, 2016 at 1:27 PM, Osvaldo ALVAREZ POZO wrote: > Hello, > > I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) > from cockpit web interface. > I have: > -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) > -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7. > centos.noarch > > I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 > and nic4 for ISCSi > I have the ovirt-node ip on nic1. > > Any time I try to deploy ovirt hosted engine from ovirt-node cockpit > interface the result is the same, I receive a "time out message", and the > ovirt-node cockpit web interface does not work anymore. > > The documentation does not talk about network card requirement I do not > know where to look. > > should I use nic2 instead of nic1 when deploying hosted-engine? > > Any advice? > > Thanks > > Inle > > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt hosted-engine deploy never works
Hello, I am trying to deploy ovirt hosted-engine (over iscsi, i do not have NFS) from cockpit web interface. I have: -1 ovirt-node (ovirt-node-ng-installer-ovirt-4.0-2016062412) -le rpm for the appliance ovirt-engine-appliance-4.0-20160819.1.el7.centos.noarch I have four network nics let's say nic1, nic2, nic3 and nic4. I use nic3 and nic4 for ISCSi I have the ovirt-node ip on nic1. Any time I try to deploy ovirt hosted engine from ovirt-node cockpit interface the result is the same, I receive a "time out message", and the ovirt-node cockpit web interface does not work anymore. The documentation does not talk about network card requirement I do not know where to look. should I use nic2 instead of nic1 when deploying hosted-engine? Any advice? Thanks Inle ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users