Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
I'm not going to lie I never had much luck. I end up using qemu-img convert on the command line to convert a vmdk to a raw file. The ova should just be a compressed file. Plenty of blogs on this. I know that's not the answer you're looking for but if you run out of options you can do this. Look for articles on converting vmdk or ova or qcow2. You will need to create the vm in advance. Then check the image name on the storage subtab. Then do a find for it. Find / -name [long name here] I've had virtual appliances built for kvm just not work (like Citrix Netscaler). Using the esx appliance and doing the steps above it works on ovirt/rhev. I am not speaking for ovirt or red hat here though, just as someone who muddled through > On Dec 15, 2016, at 4:02 AM, Shahar Havivi wrote: > > Hi, > There is a patch and its working with you ova > you can apply it to your environment if you want it to work now > https://gerrit.ovirt.org/#/c/68510/ > > Shahar. > >> On Wed, Dec 14, 2016 at 7:30 PM, wrote: >> Derek, thank you for participating. >> >> In the end, I completed the task (OVA imported). >> The root of the problem is that I tried to use the import with thin >> provision. >> But there is a known issue >> https://bugzilla.redhat.com/show_bug.cgi?id=1382404 >> Workaround: Import VM from OVA as preallocated >> It's not a very good solution, but it is better than nothing >> >> 14.12.2016, 17:50, "Derek Atkins" : >> > Hi Aleksey, >> > >> > One more question for debugging purposes: How long does the import go >> > before it dies? Do you have enough time to run: >> > >> > ps aux | grep virt-v2v >> > >> > On the import host while it's running? This might help us determine >> > where it's trying to store the data. It should be storing it in the >> > target storage, but it's possible that it's using temp space and then >> > running out. >> > >> > -derek >> > >> > aleksey.maksi...@it-kb.ru writes: >> > >> >> Hi Shahar. >> >> >> >> Look at the attached screenshot >> >> >> >> 14.12.2016, 12:15, "Shahar Havivi" : >> >> >> >> Hi, >> >> I was able to import your VMs with storage domain that had 350GB >> >> free. >> >> Your ova have a disk with 1GB actual size and 256 virtual size - >> >> when I >> >> try to import to a storage with 50G I got the error that you had. >> >> >> >> if you will look at /var/log/vdsm/import/... you will see the logs >> >> of each >> >> import, >> >> In the one that fail I found this line: >> >> qemu-img: error while writing sector 423174528: No space left on >> >> device >> >> >> >> virt-v2v try to convert via qemu-img the img from vmdk to qcow and >> >> encountered free space issue in the storage domain. >> >> >> >> Please consider asking the mailing list libgues...@redhat.com about >> >> this >> >> issue or try to increase your storage domain if you want a quick fix. >> >> >> >> The reason that I think you where able to import via the virt-v2v >> >> command >> >> is the usage of 'virt-v2v -o null' which is not writing to the disk. >> >> >> >> Shahar. >> >> >> >> On Tue, Dec 13, 2016 at 12:54 PM, wrote: >> >> >> >> Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2) >> >> >> >> All Hosts: >> >> OS Version:RHEL - 7 - 2.1511.el7.centos.2.10 >> >> OS Description:CentOS Linux 7 (Core) >> >> Kernel Version:3.10.0 - 327.36.3.el7.x86_64 >> >> KVM Version:2.3.0 - 31.el7.16.1 >> >> LIBVIRT Version:libvirt-2.0.0-10.el7_3.2 >> >> VDSM Version:vdsm-4.18.15.3-1.el7.centos >> >> SPICE Version:0.12.4 - 15.el7_2.2 >> >> GlusterFS Version:[N/A] >> >> CEPH Version:librbd1-0.80.7-3.el7 >> >> >> >> [root@KOM-AD01-VM31 ~]# virt-v2v -V >> >> virt-v2v 1.28.1 >> >> >> >> 13.12.2016, 13:20, "Shahar Havivi" : >> >> >> >> version of Engine and Host and virt-v2v (which is running on >> >> your >> >> host) >> >> and are you running on Fedora, Centos ext? >> >> >> >> On Tue, Dec 13, 2016 at 12:08 PM, >> >> wrote: >> >> >> >> 1. No. This is an unacceptable option for me >> >> 2. No. This is my first experience >> >> 3. Versions where? On Engine or on Host ? >> >> 4. Yes. >> >> >> >> 13.12.2016, 13:03, "Shahar Havivi" : >> >> >> >> Thanks you, >> >> Several questions: >> >> 1. did you try to import the disk target as >> >> preallocate? >> >> 2. did you try to import other ova files? >> >> 3. can you please send us version of virt-v2v, vdsm >> >> and >> >> engine and the os that you are running with. >> >> 4. Is it possible for you to share the ova file? >> >> >> >> Tha
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi, There is a patch and its working with you ova you can apply it to your environment if you want it to work now https://gerrit.ovirt.org/#/c/68510/ Shahar. On Wed, Dec 14, 2016 at 7:30 PM, wrote: > Derek, thank you for participating. > > In the end, I completed the task (OVA imported). > The root of the problem is that I tried to use the import with thin > provision. > But there is a known issue https://bugzilla.redhat.com/ > show_bug.cgi?id=1382404 > Workaround: Import VM from OVA as preallocated > It's not a very good solution, but it is better than nothing > > 14.12.2016, 17:50, "Derek Atkins" : > > Hi Aleksey, > > > > One more question for debugging purposes: How long does the import go > > before it dies? Do you have enough time to run: > > > > ps aux | grep virt-v2v > > > > On the import host while it's running? This might help us determine > > where it's trying to store the data. It should be storing it in the > > target storage, but it's possible that it's using temp space and then > > running out. > > > > -derek > > > > aleksey.maksi...@it-kb.ru writes: > > > >> Hi Shahar. > >> > >> Look at the attached screenshot > >> > >> 14.12.2016, 12:15, "Shahar Havivi" : > >> > >> Hi, > >> I was able to import your VMs with storage domain that had 350GB > free. > >> Your ova have a disk with 1GB actual size and 256 virtual size - > when I > >> try to import to a storage with 50G I got the error that you had. > >> > >> if you will look at /var/log/vdsm/import/... you will see the logs > of each > >> import, > >> In the one that fail I found this line: > >> qemu-img: error while writing sector 423174528: No space left on > device > >> > >> virt-v2v try to convert via qemu-img the img from vmdk to qcow and > >> encountered free space issue in the storage domain. > >> > >> Please consider asking the mailing list libgues...@redhat.com > about this > >> issue or try to increase your storage domain if you want a quick > fix. > >> > >> The reason that I think you where able to import via the virt-v2v > command > >> is the usage of 'virt-v2v -o null' which is not writing to the > disk. > >> > >> Shahar. > >> > >> On Tue, Dec 13, 2016 at 12:54 PM, > wrote: > >> > >> Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS > 7.2) > >> > >> All Hosts: > >> OS Version:RHEL - 7 - 2.1511.el7.centos.2.10 > >> OS Description:CentOS Linux 7 (Core) > >> Kernel Version:3.10.0 - 327.36.3.el7.x86_64 > >> KVM Version:2.3.0 - 31.el7.16.1 > >> LIBVIRT Version:libvirt-2.0.0-10.el7_3.2 > >> VDSM Version:vdsm-4.18.15.3-1.el7.centos > >> SPICE Version:0.12.4 - 15.el7_2.2 > >> GlusterFS Version:[N/A] > >> CEPH Version:librbd1-0.80.7-3.el7 > >> > >> [root@KOM-AD01-VM31 ~]# virt-v2v -V > >> virt-v2v 1.28.1 > >> > >> 13.12.2016, 13:20, "Shahar Havivi" : > >> > >> version of Engine and Host and virt-v2v (which is running > on your > >> host) > >> and are you running on Fedora, Centos ext? > >> > >> On Tue, Dec 13, 2016 at 12:08 PM, < > aleksey.maksi...@it-kb.ru> > >> wrote: > >> > >> 1. No. This is an unacceptable option for me > >> 2. No. This is my first experience > >> 3. Versions where? On Engine or on Host ? > >> 4. Yes. > >> > >> 13.12.2016, 13:03, "Shahar Havivi" >: > >> > >> Thanks you, > >> Several questions: > >> 1. did you try to import the disk target as > preallocate? > >> 2. did you try to import other ova files? > >> 3. can you please send us version of virt-v2v, > vdsm and > >> engine and the os that you are running with. > >> 4. Is it possible for you to share the ova file? > >> > >> Thank you, > >> Shahar. > >> > >> On Tue, Dec 13, 2016 at 11:23 AM, < > >> aleksey.maksi...@it-kb.ru> wrote: > >> > >> Log attached > >> > >> 13.12.2016, 11:32, "Shahar Havivi" < > shav...@redhat.com > >> >: > >> > >> Thank you, > >> We need the vdsm log as well please - its > the host > >> that you try to import the ova from under > /var/log > >> /vdsm/vdsm.log > >> > >> Shahar. > >> > >> On Tue, Dec 13, 2016 at 9:58 AM, < > >> aleksey.maksi...@it-kb.ru> wrote: > >> > >> Log attached > >> > >> 13.12.2016, 10:04,
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
yes, I hope it will work as a workaround until the bug is fixed On Thu, Dec 15, 2016 at 9:43 AM, Gianluca Cecchi wrote: > On Thu, Dec 15, 2016 at 7:27 AM, Shahar Havivi wrote: > >> Another workaround can import to NFS storage domain as thin-provision and >> then copy the VM to your FC or SCSI domain and delete the VM from the NFS >> domain. >> >> > In this case with "copy VM to your FC os SCSI domain", which way do you > mean? > Selecting VM, disks sub-tab, select disk and then "move"? > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
On Thu, Dec 15, 2016 at 7:27 AM, Shahar Havivi wrote: > Another workaround can import to NFS storage domain as thin-provision and > then copy the VM to your FC or SCSI domain and delete the VM from the NFS > domain. > > In this case with "copy VM to your FC os SCSI domain", which way do you mean? Selecting VM, disks sub-tab, select disk and then "move"? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Another workaround can import to NFS storage domain as thin-provision and then copy the VM to your FC or SCSI domain and delete the VM from the NFS domain. On Wed, Dec 14, 2016 at 7:30 PM, wrote: > Derek, thank you for participating. > > In the end, I completed the task (OVA imported). > The root of the problem is that I tried to use the import with thin > provision. > But there is a known issue https://bugzilla.redhat.com/ > show_bug.cgi?id=1382404 > Workaround: Import VM from OVA as preallocated > It's not a very good solution, but it is better than nothing > > 14.12.2016, 17:50, "Derek Atkins" : > > Hi Aleksey, > > > > One more question for debugging purposes: How long does the import go > > before it dies? Do you have enough time to run: > > > > ps aux | grep virt-v2v > > > > On the import host while it's running? This might help us determine > > where it's trying to store the data. It should be storing it in the > > target storage, but it's possible that it's using temp space and then > > running out. > > > > -derek > > > > aleksey.maksi...@it-kb.ru writes: > > > >> Hi Shahar. > >> > >> Look at the attached screenshot > >> > >> 14.12.2016, 12:15, "Shahar Havivi" : > >> > >> Hi, > >> I was able to import your VMs with storage domain that had 350GB > free. > >> Your ova have a disk with 1GB actual size and 256 virtual size - > when I > >> try to import to a storage with 50G I got the error that you had. > >> > >> if you will look at /var/log/vdsm/import/... you will see the logs > of each > >> import, > >> In the one that fail I found this line: > >> qemu-img: error while writing sector 423174528: No space left on > device > >> > >> virt-v2v try to convert via qemu-img the img from vmdk to qcow and > >> encountered free space issue in the storage domain. > >> > >> Please consider asking the mailing list libgues...@redhat.com > about this > >> issue or try to increase your storage domain if you want a quick > fix. > >> > >> The reason that I think you where able to import via the virt-v2v > command > >> is the usage of 'virt-v2v -o null' which is not writing to the > disk. > >> > >> Shahar. > >> > >> On Tue, Dec 13, 2016 at 12:54 PM, > wrote: > >> > >> Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS > 7.2) > >> > >> All Hosts: > >> OS Version:RHEL - 7 - 2.1511.el7.centos.2.10 > >> OS Description:CentOS Linux 7 (Core) > >> Kernel Version:3.10.0 - 327.36.3.el7.x86_64 > >> KVM Version:2.3.0 - 31.el7.16.1 > >> LIBVIRT Version:libvirt-2.0.0-10.el7_3.2 > >> VDSM Version:vdsm-4.18.15.3-1.el7.centos > >> SPICE Version:0.12.4 - 15.el7_2.2 > >> GlusterFS Version:[N/A] > >> CEPH Version:librbd1-0.80.7-3.el7 > >> > >> [root@KOM-AD01-VM31 ~]# virt-v2v -V > >> virt-v2v 1.28.1 > >> > >> 13.12.2016, 13:20, "Shahar Havivi" : > >> > >> version of Engine and Host and virt-v2v (which is running > on your > >> host) > >> and are you running on Fedora, Centos ext? > >> > >> On Tue, Dec 13, 2016 at 12:08 PM, < > aleksey.maksi...@it-kb.ru> > >> wrote: > >> > >> 1. No. This is an unacceptable option for me > >> 2. No. This is my first experience > >> 3. Versions where? On Engine or on Host ? > >> 4. Yes. > >> > >> 13.12.2016, 13:03, "Shahar Havivi" >: > >> > >> Thanks you, > >> Several questions: > >> 1. did you try to import the disk target as > preallocate? > >> 2. did you try to import other ova files? > >> 3. can you please send us version of virt-v2v, > vdsm and > >> engine and the os that you are running with. > >> 4. Is it possible for you to share the ova file? > >> > >> Thank you, > >> Shahar. > >> > >> On Tue, Dec 13, 2016 at 11:23 AM, < > >> aleksey.maksi...@it-kb.ru> wrote: > >> > >> Log attached > >> > >> 13.12.2016, 11:32, "Shahar Havivi" < > shav...@redhat.com > >> >: > >> > >> Thank you, > >> We need the vdsm log as well please - its > the host > >> that you try to import the ova from under > /var/log > >> /vdsm/vdsm.log > >> > >> Shahar. > >> > >> On Tue, Dec 13, 2016 at 9:58 AM, < > >> aleksey.maksi...@it-kb.ru> wrote: > >> > >> Log attached > >> > >> 13.12.2016, 10:04, "Sh
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Derek, thank you for participating. In the end, I completed the task (OVA imported). The root of the problem is that I tried to use the import with thin provision. But there is a known issue https://bugzilla.redhat.com/show_bug.cgi?id=1382404 Workaround: Import VM from OVA as preallocated It's not a very good solution, but it is better than nothing 14.12.2016, 17:50, "Derek Atkins" : > Hi Aleksey, > > One more question for debugging purposes: How long does the import go > before it dies? Do you have enough time to run: > > ps aux | grep virt-v2v > > On the import host while it's running? This might help us determine > where it's trying to store the data. It should be storing it in the > target storage, but it's possible that it's using temp space and then > running out. > > -derek > > aleksey.maksi...@it-kb.ru writes: > >> Hi Shahar. >> >> Look at the attached screenshot >> >> 14.12.2016, 12:15, "Shahar Havivi" : >> >> Hi, >> I was able to import your VMs with storage domain that had 350GB free. >> Your ova have a disk with 1GB actual size and 256 virtual size - when I >> try to import to a storage with 50G I got the error that you had. >> >> if you will look at /var/log/vdsm/import/... you will see the logs of >> each >> import, >> In the one that fail I found this line: >> qemu-img: error while writing sector 423174528: No space left on device >> >> virt-v2v try to convert via qemu-img the img from vmdk to qcow and >> encountered free space issue in the storage domain. >> >> Please consider asking the mailing list libgues...@redhat.com about >> this >> issue or try to increase your storage domain if you want a quick fix. >> >> The reason that I think you where able to import via the virt-v2v >> command >> is the usage of 'virt-v2v -o null' which is not writing to the disk. >> >> Shahar. >> >> On Tue, Dec 13, 2016 at 12:54 PM, wrote: >> >> Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2) >> >> All Hosts: >> OS Version:RHEL - 7 - 2.1511.el7.centos.2.10 >> OS Description:CentOS Linux 7 (Core) >> Kernel Version:3.10.0 - 327.36.3.el7.x86_64 >> KVM Version:2.3.0 - 31.el7.16.1 >> LIBVIRT Version:libvirt-2.0.0-10.el7_3.2 >> VDSM Version:vdsm-4.18.15.3-1.el7.centos >> SPICE Version:0.12.4 - 15.el7_2.2 >> GlusterFS Version:[N/A] >> CEPH Version:librbd1-0.80.7-3.el7 >> >> [root@KOM-AD01-VM31 ~]# virt-v2v -V >> virt-v2v 1.28.1 >> >> 13.12.2016, 13:20, "Shahar Havivi" : >> >> version of Engine and Host and virt-v2v (which is running on >> your >> host) >> and are you running on Fedora, Centos ext? >> >> On Tue, Dec 13, 2016 at 12:08 PM, >> wrote: >> >> 1. No. This is an unacceptable option for me >> 2. No. This is my first experience >> 3. Versions where? On Engine or on Host ? >> 4. Yes. >> >> 13.12.2016, 13:03, "Shahar Havivi" : >> >> Thanks you, >> Several questions: >> 1. did you try to import the disk target as preallocate? >> 2. did you try to import other ova files? >> 3. can you please send us version of virt-v2v, vdsm and >> engine and the os that you are running with. >> 4. Is it possible for you to share the ova file? >> >> Thank you, >> Shahar. >> >> On Tue, Dec 13, 2016 at 11:23 AM, < >> aleksey.maksi...@it-kb.ru> wrote: >> >> Log attached >> >> 13.12.2016, 11:32, "Shahar Havivi" >> > >: >> >> Thank you, >> We need the vdsm log as well please - its the >> host >> that you try to import the ova from under >> /var/log >> /vdsm/vdsm.log >> >> Shahar. >> >> On Tue, Dec 13, 2016 at 9:58 AM, < >> aleksey.maksi...@it-kb.ru> wrote: >> >> Log attached >> >> 13.12.2016, 10:04, "Shahar Havivi" < >> shav...@redhat.com>: >> >> Please attach the log and will see what >> the error is. >> >> On Tue, Dec 13, 2016 at 9:01 AM, < >> aleksey.maksi...@it-kb.ru> wrote: >> >> Preallocated ? >> I'm trying to import image o
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi Aleksey, One more question for debugging purposes: How long does the import go before it dies? Do you have enough time to run: ps aux | grep virt-v2v On the import host while it's running? This might help us determine where it's trying to store the data. It should be storing it in the target storage, but it's possible that it's using temp space and then running out. -derek aleksey.maksi...@it-kb.ru writes: > > Hi Shahar. > > Look at the attached screenshot > > > > 14.12.2016, 12:15, "Shahar Havivi" : > > Hi, > I was able to import your VMs with storage domain that had 350GB free. > Your ova have a disk with 1GB actual size and 256 virtual size - when I > try to import to a storage with 50G I got the error that you had. > > if you will look at /var/log/vdsm/import/... you will see the logs of each > import, > In the one that fail I found this line: > qemu-img: error while writing sector 423174528: No space left on device > > virt-v2v try to convert via qemu-img the img from vmdk to qcow and > encountered free space issue in the storage domain. > > Please consider asking the mailing list libgues...@redhat.com about this > issue or try to increase your storage domain if you want a quick fix. > > The reason that I think you where able to import via the virt-v2v command > is the usage of 'virt-v2v -o null' which is not writing to the disk. > > Shahar. > > On Tue, Dec 13, 2016 at 12:54 PM, wrote: > > Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2) > > All Hosts: > OS Version:RHEL - 7 - 2.1511.el7.centos.2.10 > OS Description:CentOS Linux 7 (Core) > Kernel Version:3.10.0 - 327.36.3.el7.x86_64 > KVM Version:2.3.0 - 31.el7.16.1 > LIBVIRT Version:libvirt-2.0.0-10.el7_3.2 > VDSM Version:vdsm-4.18.15.3-1.el7.centos > SPICE Version:0.12.4 - 15.el7_2.2 > GlusterFS Version:[N/A] > CEPH Version:librbd1-0.80.7-3.el7 > > [root@KOM-AD01-VM31 ~]# virt-v2v -V > virt-v2v 1.28.1 > > > 13.12.2016, 13:20, "Shahar Havivi" : > > version of Engine and Host and virt-v2v (which is running on your > host) > and are you running on Fedora, Centos ext? > > > On Tue, Dec 13, 2016 at 12:08 PM, > wrote: > > 1. No. This is an unacceptable option for me > 2. No. This is my first experience > 3. Versions where? On Engine or on Host ? > 4. Yes. > > > 13.12.2016, 13:03, "Shahar Havivi" : > > Thanks you, > Several questions: > 1. did you try to import the disk target as preallocate? > 2. did you try to import other ova files? > 3. can you please send us version of virt-v2v, vdsm and > engine and the os that you are running with. > 4. Is it possible for you to share the ova file? > > Thank you, > Shahar. > > On Tue, Dec 13, 2016 at 11:23 AM, < > aleksey.maksi...@it-kb.ru> wrote: > > Log attached > > 13.12.2016, 11:32, "Shahar Havivi" >: > > Thank you, > We need the vdsm log as well please - its the host > that you try to import the ova from under /var/log > /vdsm/vdsm.log > > Shahar. > > On Tue, Dec 13, 2016 at 9:58 AM, < > aleksey.maksi...@it-kb.ru> wrote: > > Log attached > > 13.12.2016, 10:04, "Shahar Havivi" < > shav...@redhat.com>: > > Please attach the log and will see what > the error is. > > On Tue, Dec 13, 2016 at 9:01 AM, < > aleksey.maksi...@it-kb.ru> wrote: > > Preallocated ? > I'm trying to import image of virtual > appliance "HP 3PAR Vi
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi Shahar. Look at the attached screenshot 14.12.2016, 12:15, "Shahar Havivi" :Hi,I was able to import your VMs with storage domain that had 350GB free.Your ova have a disk with 1GB actual size and 256 virtual size - when I try to import to a storage with 50G I got the error that you had. if you will look at /var/log/vdsm/import/... you will see the logs of each import, In the one that fail I found this line:qemu-img: error while writing sector 423174528: No space left on device virt-v2v try to convert via qemu-img the img from vmdk to qcow and encountered free space issue in the storage domain. Please consider asking the mailing list libgues...@redhat.com about this issue or try to increase your storage domain if you want a quick fix. The reason that I think you where able to import via the virt-v2v command is the usage of 'virt-v2v -o null' which is not writing to the disk. Shahar. On Tue, Dec 13, 2016 at 12:54 PM,wrote:Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2)All Hosts:OS Version:RHEL - 7 - 2.1511.el7.centos.2.10OS Description:CentOS Linux 7 (Core)Kernel Version:3.10.0 - 327.36.3.el7.x86_64KVM Version:2.3.0 - 31.el7.16.1LIBVIRT Version:libvirt-2.0.0-10.el7_3.2VDSM Version:vdsm-4.18.15.3-1.el7.centosSPICE Version:0.12.4 - 15.el7_2.2GlusterFS Version:[N/A]CEPH Version:librbd1-0.80.7-3.el7 [root@KOM-AD01-VM31 ~]# virt-v2v -Vvirt-v2v 1.28.1 13.12.2016, 13:20, "Shahar Havivi" :version of Engine and Host and virt-v2v (which is running on your host)and are you running on Fedora, Centos ext? On Tue, Dec 13, 2016 at 12:08 PM, wrote:1. No. This is an unacceptable option for me2. No. This is my first experience3. Versions where? On Engine or on Host ?4. Yes. 13.12.2016, 13:03, "Shahar Havivi" :Thanks you,Several questions:1. did you try to import the disk target as preallocate?2. did you try to import other ova files?3. can you please send us version of virt-v2v, vdsm and engine and the os that you are running with.4. Is it possible for you to share the ova file? Thank you, Shahar. On Tue, Dec 13, 2016 at 11:23 AM, wrote:Log attached 13.12.2016, 11:32, "Shahar Havivi" :Thank you,We need the vdsm log as well please - its the host that you try to import the ova from under /var/log/vdsm/vdsm.log Shahar. On Tue, Dec 13, 2016 at 9:58 AM, wrote:Log attached 13.12.2016, 10:04, "Shahar Havivi" :Please attach the log and will see what the error is. On Tue, Dec 13, 2016 at 9:01 AM, wrote:Preallocated ?I'm trying to import image of virtual appliance "HP 3PAR Virtual Service Processor"This virtual machine has drive 256GB. But really, this is a 40GB disk never grows. I don't want to waste that much disk space. There is no other way ? 13.12.2016, 09:53, "Shahar Havivi" :Okso try to import as preallocated and attach the log if you have any errors. Shahar. On Tue, Dec 13, 2016 at 8:47 AM, wrote: All my Data-Domains - FC SAN. Not ISCSI. 13.12.2016, 09:41, "Shahar Havivi" :What is the type of the target storage domain that you try to import to?(nfs or iscsi)if its iscsi try to change it to preallocate instead of thin-provision,also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM, wrote:# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o nullfsync /dev/sdaguestfsd: main_loop: proc 282 (internal_autosync) took 0.01 secondslibguestfs: trace: internal_autosync = 0libguestfs: sending SIGTERM to process 3338libguestfs: trace: shutdown = 0libguestfs: trace: closelibguestfs: closing guestfs handle 0x2880a10 (state 0)libguestfs: command: run: rmlibguestfs: command: run: \ -rf /tmp/libguestfsrxuByo[ 99.0] Checking if the guest needs BIOS or UEFI to boot[ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw)target_file = /var/tmp/null.lP6vGa/sdatarget_format = rawtarget_estimated_size = 13480052354target_overlay = /var/tmp/v2vovle81937.qcow2target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdkqemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%)virtual copying rate: 95364.1 M bits/secreal copying rate: 811.7 M bits/secsda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2%[ 126.0] Creating output metadata[ 126.0] Finishing offThe output is very voluminous. Errors are seen.13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" :> -bash: annotate-output: command not found>> 12.12.2016, 21:26, "Derek Atkins" :>> Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote:>>>
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi, I was able to import your VMs with storage domain that had 350GB free. Your ova have a disk with 1GB actual size and 256 virtual size - when I try to import to a storage with 50G I got the error that you had. if you will look at /var/log/vdsm/import/... you will see the logs of each import, In the one that fail I found this line: qemu-img: error while writing sector 423174528: No space left on device virt-v2v try to convert via qemu-img the img from vmdk to qcow and encountered free space issue in the storage domain. Please consider asking the mailing list libgues...@redhat.com about this issue or try to increase your storage domain if you want a quick fix. The reason that I think you where able to import via the virt-v2v command is the usage of 'virt-v2v -o null' which is not writing to the disk. Shahar. On Tue, Dec 13, 2016 at 12:54 PM, wrote: > Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2) > > All Hosts: > OS Version:RHEL - 7 - 2.1511.el7.centos.2.10 > OS Description:CentOS Linux 7 (Core) > Kernel Version:3.10.0 - 327.36.3.el7.x86_64 > KVM Version:2.3.0 - 31.el7.16.1 > LIBVIRT Version:libvirt-2.0.0-10.el7_3.2 > VDSM Version:vdsm-4.18.15.3-1.el7.centos > SPICE Version:0.12.4 - 15.el7_2.2 > GlusterFS Version:[N/A] > CEPH Version:librbd1-0.80.7-3.el7 > > [root@KOM-AD01-VM31 ~]# virt-v2v -V > virt-v2v 1.28.1 > > > 13.12.2016, 13:20, "Shahar Havivi" : > > version of Engine and Host and virt-v2v (which is running on your host) > and are you running on Fedora, Centos ext? > > > On Tue, Dec 13, 2016 at 12:08 PM, wrote: > > 1. No. This is an unacceptable option for me > 2. No. This is my first experience > 3. Versions where? On Engine or on Host ? > 4. Yes. > > > 13.12.2016, 13:03, "Shahar Havivi" : > > Thanks you, > Several questions: > 1. did you try to import the disk target as preallocate? > 2. did you try to import other ova files? > 3. can you please send us version of virt-v2v, vdsm and engine and the os > that you are running with. > 4. Is it possible for you to share the ova file? > > Thank you, > Shahar. > > On Tue, Dec 13, 2016 at 11:23 AM, wrote: > > Log attached > > 13.12.2016, 11:32, "Shahar Havivi" : > > Thank you, > We need the vdsm log as well please - its the host that you try to import > the ova from under /var/log/vdsm/vdsm.log > > Shahar. > > On Tue, Dec 13, 2016 at 9:58 AM, wrote: > > Log attached > > 13.12.2016, 10:04, "Shahar Havivi" : > > Please attach the log and will see what the error is. > > On Tue, Dec 13, 2016 at 9:01 AM, wrote: > > Preallocated ? > I'm trying to import image of virtual appliance "HP 3PAR Virtual Service > Processor" > This virtual machine has drive 256GB. But really, this is a 40GB disk > never grows. I don't want to waste that much disk space. > > There is no other way ? > > 13.12.2016, 09:53, "Shahar Havivi" : > > Ok > so try to import as preallocated and attach the log if you have any errors. > > Shahar. > > On Tue, Dec 13, 2016 at 8:47 AM, wrote: > > > All my Data-Domains - FC SAN. Not ISCSI. > > > 13.12.2016, 09:41, "Shahar Havivi" : > > What is the type of the target storage domain that you try to import > to?(nfs or iscsi) > if its iscsi try to change it to preallocate instead of thin-provision, > also please attach the engine log if you have more problems. > > Shahar. > > On Tue, Dec 13, 2016 at 7:08 AM, wrote: > > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA fr
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
No. The problem is not solved. I still can not import OVA in oVirt. And the problem is not a lack of disk space. 13.12.2016, 18:58, "Derek Atkins" : > Hi, > > aleksey.maksi...@it-kb.ru writes: > >> # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova >> /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null >> >> >> fsync /dev/sda >> guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds >> libguestfs: trace: internal_autosync = 0 >> libguestfs: sending SIGTERM to process 3338 >> libguestfs: trace: shutdown = 0 >> libguestfs: trace: close >> libguestfs: closing guestfs handle 0x2880a10 (state 0) >> libguestfs: command: run: rm >> libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo >> [ 99.0] Checking if the guest needs BIOS or UEFI to boot >> [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) >> target_file = /var/tmp/null.lP6vGa/sda >> target_format = raw >> target_estimated_size = 13480052354 >> target_overlay = /var/tmp/v2vovle81937.qcow2 >> target_overlay.ov_source = >> /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdk >> qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' >> '/var/tmp/null.lP6vGa/sda' >> (100.00/100%) >> virtual copying rate: 95364.1 M bits/sec >> real copying rate: 811.7 M bits/sec >> sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% >> [ 126.0] Creating output metadata >> [ 126.0] Finishing off >> >> The output is very voluminous. Errors are seen. > > So it estimates that it will require 13GB. Do you have 13GB free on > /var/tmp? > > You say "Errors are seen." What errors do you see? It *looks* like > this finished successfully. > > -derek > -- > Derek Atkins 617-623-3745 > de...@ihtfp.com www.ihtfp.com > Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi, aleksey.maksi...@it-kb.ru writes: > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. So it estimates that it will require 13GB. Do you have 13GB free on /var/tmp? You say "Errors are seen." What errors do you see? It *looks* like this finished successfully. -derek -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Engine - oVirt Engine Version: 4.0.5.5-1.el7.centos (CentOS 7.2)All Hosts:OS Version:RHEL - 7 - 2.1511.el7.centos.2.10OS Description:CentOS Linux 7 (Core)Kernel Version:3.10.0 - 327.36.3.el7.x86_64KVM Version:2.3.0 - 31.el7.16.1LIBVIRT Version:libvirt-2.0.0-10.el7_3.2VDSM Version:vdsm-4.18.15.3-1.el7.centosSPICE Version:0.12.4 - 15.el7_2.2GlusterFS Version:[N/A]CEPH Version:librbd1-0.80.7-3.el7 [root@KOM-AD01-VM31 ~]# virt-v2v -Vvirt-v2v 1.28.1 13.12.2016, 13:20, "Shahar Havivi" :version of Engine and Host and virt-v2v (which is running on your host)and are you running on Fedora, Centos ext? On Tue, Dec 13, 2016 at 12:08 PM,wrote:1. No. This is an unacceptable option for me2. No. This is my first experience3. Versions where? On Engine or on Host ?4. Yes. 13.12.2016, 13:03, "Shahar Havivi" :Thanks you,Several questions:1. did you try to import the disk target as preallocate?2. did you try to import other ova files?3. can you please send us version of virt-v2v, vdsm and engine and the os that you are running with.4. Is it possible for you to share the ova file? Thank you, Shahar. On Tue, Dec 13, 2016 at 11:23 AM, wrote:Log attached 13.12.2016, 11:32, "Shahar Havivi" :Thank you,We need the vdsm log as well please - its the host that you try to import the ova from under /var/log/vdsm/vdsm.log Shahar. On Tue, Dec 13, 2016 at 9:58 AM, wrote:Log attached 13.12.2016, 10:04, "Shahar Havivi" :Please attach the log and will see what the error is. On Tue, Dec 13, 2016 at 9:01 AM, wrote:Preallocated ?I'm trying to import image of virtual appliance "HP 3PAR Virtual Service Processor"This virtual machine has drive 256GB. But really, this is a 40GB disk never grows. I don't want to waste that much disk space. There is no other way ? 13.12.2016, 09:53, "Shahar Havivi" :Okso try to import as preallocated and attach the log if you have any errors. Shahar. On Tue, Dec 13, 2016 at 8:47 AM, wrote: All my Data-Domains - FC SAN. Not ISCSI. 13.12.2016, 09:41, "Shahar Havivi" :What is the type of the target storage domain that you try to import to?(nfs or iscsi)if its iscsi try to change it to preallocate instead of thin-provision,also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM, wrote:# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o nullfsync /dev/sdaguestfsd: main_loop: proc 282 (internal_autosync) took 0.01 secondslibguestfs: trace: internal_autosync = 0libguestfs: sending SIGTERM to process 3338libguestfs: trace: shutdown = 0libguestfs: trace: closelibguestfs: closing guestfs handle 0x2880a10 (state 0)libguestfs: command: run: rmlibguestfs: command: run: \ -rf /tmp/libguestfsrxuByo[ 99.0] Checking if the guest needs BIOS or UEFI to boot[ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw)target_file = /var/tmp/null.lP6vGa/sdatarget_format = rawtarget_estimated_size = 13480052354target_overlay = /var/tmp/v2vovle81937.qcow2target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdkqemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%)virtual copying rate: 95364.1 M bits/secreal copying rate: 811.7 M bits/secsda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2%[ 126.0] Creating output metadata[ 126.0] Finishing offThe output is very voluminous. Errors are seen.13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" :> -bash: annotate-output: command not found>> 12.12.2016, 21:26, "Derek Atkins" :>> Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote:>>> I mount 5TB nfs-share to my host and tried to import OVA from this>>> mount-point.>>> Exact same error.>> Do the import process attempts to use 256G inside the Engine virtual>>> machine ???>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru">>> : 1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" :> Hi Derek>> # df -H /tmp/>> Filesystem Size Used Avail Use% Mounted on> /dev/cciss/c0d0p2 53G 5.7G 45G 12% />> But my OVA file size - 1.2G>> 12.12.2016, 17:26, "Derek Atkins" :>> Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where>> the>> virt-v2v does it
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
version of Engine and Host and virt-v2v (which is running on your host) and are you running on Fedora, Centos ext? On Tue, Dec 13, 2016 at 12:08 PM, wrote: > 1. No. This is an unacceptable option for me > 2. No. This is my first experience > 3. Versions where? On Engine or on Host ? > 4. Yes. > > > 13.12.2016, 13:03, "Shahar Havivi" : > > Thanks you, > Several questions: > 1. did you try to import the disk target as preallocate? > 2. did you try to import other ova files? > 3. can you please send us version of virt-v2v, vdsm and engine and the os > that you are running with. > 4. Is it possible for you to share the ova file? > > Thank you, > Shahar. > > On Tue, Dec 13, 2016 at 11:23 AM, wrote: > > Log attached > > 13.12.2016, 11:32, "Shahar Havivi" : > > Thank you, > We need the vdsm log as well please - its the host that you try to import > the ova from under /var/log/vdsm/vdsm.log > > Shahar. > > On Tue, Dec 13, 2016 at 9:58 AM, wrote: > > Log attached > > 13.12.2016, 10:04, "Shahar Havivi" : > > Please attach the log and will see what the error is. > > On Tue, Dec 13, 2016 at 9:01 AM, wrote: > > Preallocated ? > I'm trying to import image of virtual appliance "HP 3PAR Virtual Service > Processor" > This virtual machine has drive 256GB. But really, this is a 40GB disk > never grows. I don't want to waste that much disk space. > > There is no other way ? > > 13.12.2016, 09:53, "Shahar Havivi" : > > Ok > so try to import as preallocated and attach the log if you have any errors. > > Shahar. > > On Tue, Dec 13, 2016 at 8:47 AM, wrote: > > > All my Data-Domains - FC SAN. Not ISCSI. > > > 13.12.2016, 09:41, "Shahar Havivi" : > > What is the type of the target storage domain that you try to import > to?(nfs or iscsi) > if its iscsi try to change it to preallocate instead of thin-provision, > also please attach the engine log if you have more problems. > > Shahar. > > On Tue, Dec 13, 2016 at 7:08 AM, wrote: > > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA from this > >>> mount-point. > >>> Exact same error. > >>> > >>> Do the import process attempts to use 256G inside the Engine virtual > >>> machine ??? > >>> > >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > >>> : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin > provision" > (see the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" > : > >Hi Derek > > > ># df -H /tmp/ > > > >Filesystem Size Used Avail Use% Mounted on > >/dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > > >But my OVA file size - 1.2G > > > >12.12.2016, 17:26, "Derek Atkins" : > >> Hi, > >> > >> Did you perhaps run out of disk space in /tmp? I'm not sure > where > >> the > >> virt-v2v does it work, but the error "Conversion of VM from > exteral > >> enironment failed: copy-disk stream closed unexpectedly" seems > to > >> imply an > >> error there. > >> > >> I had no issues myself on 4.0.5 (modulo setfiles taking a very > long > >> time > >> in a few cases). > >> > >> -derek > >> > >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru > wrote: > >>> Hel
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
1. No. This is an unacceptable option for me2. No. This is my first experience3. Versions where? On Engine or on Host ?4. Yes. 13.12.2016, 13:03, "Shahar Havivi" :Thanks you,Several questions:1. did you try to import the disk target as preallocate?2. did you try to import other ova files?3. can you please send us version of virt-v2v, vdsm and engine and the os that you are running with.4. Is it possible for you to share the ova file? Thank you, Shahar. On Tue, Dec 13, 2016 at 11:23 AM,wrote:Log attached 13.12.2016, 11:32, "Shahar Havivi" :Thank you,We need the vdsm log as well please - its the host that you try to import the ova from under /var/log/vdsm/vdsm.log Shahar. On Tue, Dec 13, 2016 at 9:58 AM, wrote:Log attached 13.12.2016, 10:04, "Shahar Havivi" :Please attach the log and will see what the error is. On Tue, Dec 13, 2016 at 9:01 AM, wrote:Preallocated ?I'm trying to import image of virtual appliance "HP 3PAR Virtual Service Processor"This virtual machine has drive 256GB. But really, this is a 40GB disk never grows. I don't want to waste that much disk space. There is no other way ? 13.12.2016, 09:53, "Shahar Havivi" :Okso try to import as preallocated and attach the log if you have any errors. Shahar. On Tue, Dec 13, 2016 at 8:47 AM, wrote: All my Data-Domains - FC SAN. Not ISCSI. 13.12.2016, 09:41, "Shahar Havivi" :What is the type of the target storage domain that you try to import to?(nfs or iscsi)if its iscsi try to change it to preallocate instead of thin-provision,also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM, wrote:# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o nullfsync /dev/sdaguestfsd: main_loop: proc 282 (internal_autosync) took 0.01 secondslibguestfs: trace: internal_autosync = 0libguestfs: sending SIGTERM to process 3338libguestfs: trace: shutdown = 0libguestfs: trace: closelibguestfs: closing guestfs handle 0x2880a10 (state 0)libguestfs: command: run: rmlibguestfs: command: run: \ -rf /tmp/libguestfsrxuByo[ 99.0] Checking if the guest needs BIOS or UEFI to boot[ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw)target_file = /var/tmp/null.lP6vGa/sdatarget_format = rawtarget_estimated_size = 13480052354target_overlay = /var/tmp/v2vovle81937.qcow2target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdkqemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%)virtual copying rate: 95364.1 M bits/secreal copying rate: 811.7 M bits/secsda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2%[ 126.0] Creating output metadata[ 126.0] Finishing offThe output is very voluminous. Errors are seen.13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" :> -bash: annotate-output: command not found>> 12.12.2016, 21:26, "Derek Atkins" :>> Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote:>>> I mount 5TB nfs-share to my host and tried to import OVA from this>>> mount-point.>>> Exact same error.>> Do the import process attempts to use 256G inside the Engine virtual>>> machine ???>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru">>> : 1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" :> Hi Derek>> # df -H /tmp/>> Filesystem Size Used Avail Use% Mounted on> /dev/cciss/c0d0p2 53G 5.7G 45G 12% />> But my OVA file size - 1.2G>> 12.12.2016, 17:26, "Derek Atkins" :>> Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where>> the>> virt-v2v does it work, but the error "Conversion of VM from exteral>> enironment failed: copy-disk stream closed unexpectedly" seems to>> imply an>> error there. I had no issues myself on 4.0.5 (modulo setfiles taking a very long>> time>> in a few cases). -derek On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote:>>> Hello oVirt guru`s!>> In the process of importing from OVA file (from>>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in>>> the web>>> console, then disappears.>> In the oVirt Engine log:>>
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Thanks you, Several questions: 1. did you try to import the disk target as preallocate? 2. did you try to import other ova files? 3. can you please send us version of virt-v2v, vdsm and engine and the os that you are running with. 4. Is it possible for you to share the ova file? Thank you, Shahar. On Tue, Dec 13, 2016 at 11:23 AM, wrote: > Log attached > > 13.12.2016, 11:32, "Shahar Havivi" : > > Thank you, > We need the vdsm log as well please - its the host that you try to import > the ova from under /var/log/vdsm/vdsm.log > > Shahar. > > On Tue, Dec 13, 2016 at 9:58 AM, wrote: > > Log attached > > 13.12.2016, 10:04, "Shahar Havivi" : > > Please attach the log and will see what the error is. > > On Tue, Dec 13, 2016 at 9:01 AM, wrote: > > Preallocated ? > I'm trying to import image of virtual appliance "HP 3PAR Virtual Service > Processor" > This virtual machine has drive 256GB. But really, this is a 40GB disk > never grows. I don't want to waste that much disk space. > > There is no other way ? > > 13.12.2016, 09:53, "Shahar Havivi" : > > Ok > so try to import as preallocated and attach the log if you have any errors. > > Shahar. > > On Tue, Dec 13, 2016 at 8:47 AM, wrote: > > > All my Data-Domains - FC SAN. Not ISCSI. > > > 13.12.2016, 09:41, "Shahar Havivi" : > > What is the type of the target storage domain that you try to import > to?(nfs or iscsi) > if its iscsi try to change it to preallocate instead of thin-provision, > also please attach the engine log if you have more problems. > > Shahar. > > On Tue, Dec 13, 2016 at 7:08 AM, wrote: > > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA from this > >>> mount-point. > >>> Exact same error. > >>> > >>> Do the import process attempts to use 256G inside the Engine virtual > >>> machine ??? > >>> > >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > >>> : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin > provision" > (see the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" > : > >Hi Derek > > > ># df -H /tmp/ > > > >Filesystem Size Used Avail Use% Mounted on > >/dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > > >But my OVA file size - 1.2G > > > >12.12.2016, 17:26, "Derek Atkins" : > >> Hi, > >> > >> Did you perhaps run out of disk space in /tmp? I'm not sure > where > >> the > >> virt-v2v does it work, but the error "Conversion of VM from > exteral > >> enironment failed: copy-disk stream closed unexpectedly" seems > to > >> imply an > >> error there. > >> > >> I had no issues myself on 4.0.5 (modulo setfiles taking a very > long > >> time > >> in a few cases). > >> > >> -derek > >> > >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru > wrote: > >>> Hello oVirt guru`s! > >>> > >>> In the process of importing from OVA file (from > >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first > appears in > >>> the web > >>> console, then disappears. > >>> > >>> In the oVirt Engine log: > >>> > >>> ... > >>> 2016-12-12 16:55:20,209 INFO > >>
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Thank you, We need the vdsm log as well please - its the host that you try to import the ova from under /var/log/vdsm/vdsm.log Shahar. On Tue, Dec 13, 2016 at 9:58 AM, wrote: > Log attached > > 13.12.2016, 10:04, "Shahar Havivi" : > > Please attach the log and will see what the error is. > > On Tue, Dec 13, 2016 at 9:01 AM, wrote: > > Preallocated ? > I'm trying to import image of virtual appliance "HP 3PAR Virtual Service > Processor" > This virtual machine has drive 256GB. But really, this is a 40GB disk > never grows. I don't want to waste that much disk space. > > There is no other way ? > > 13.12.2016, 09:53, "Shahar Havivi" : > > Ok > so try to import as preallocated and attach the log if you have any errors. > > Shahar. > > On Tue, Dec 13, 2016 at 8:47 AM, wrote: > > > All my Data-Domains - FC SAN. Not ISCSI. > > > 13.12.2016, 09:41, "Shahar Havivi" : > > What is the type of the target storage domain that you try to import > to?(nfs or iscsi) > if its iscsi try to change it to preallocate instead of thin-provision, > also please attach the engine log if you have more problems. > > Shahar. > > On Tue, Dec 13, 2016 at 7:08 AM, wrote: > > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA from this > >>> mount-point. > >>> Exact same error. > >>> > >>> Do the import process attempts to use 256G inside the Engine virtual > >>> machine ??? > >>> > >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > >>> : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin > provision" > (see the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" > : > >Hi Derek > > > ># df -H /tmp/ > > > >Filesystem Size Used Avail Use% Mounted on > >/dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > > >But my OVA file size - 1.2G > > > >12.12.2016, 17:26, "Derek Atkins" : > >> Hi, > >> > >> Did you perhaps run out of disk space in /tmp? I'm not sure > where > >> the > >> virt-v2v does it work, but the error "Conversion of VM from > exteral > >> enironment failed: copy-disk stream closed unexpectedly" seems > to > >> imply an > >> error there. > >> > >> I had no issues myself on 4.0.5 (modulo setfiles taking a very > long > >> time > >> in a few cases). > >> > >> -derek > >> > >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru > wrote: > >>> Hello oVirt guru`s! > >>> > >>> In the process of importing from OVA file (from > >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first > appears in > >>> the web > >>> console, then disappears. > >>> > >>> In the oVirt Engine log: > >>> > >>> ... > >>> 2016-12-12 16:55:20,209 INFO > >>> [org.ovirt.engine.core.bll.exportimport. > ImportVmFromOvaCommand] > >>> (default > >>> task-28) [6179021a] Lock Acquired to object > >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53= >>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, > >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99= >>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName > >>> rhel_Vsp-4.4.0.GA-
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Log attached 13.12.2016, 10:04, "Shahar Havivi" :Please attach the log and will see what the error is. On Tue, Dec 13, 2016 at 9:01 AM,wrote:Preallocated ?I'm trying to import image of virtual appliance "HP 3PAR Virtual Service Processor"This virtual machine has drive 256GB. But really, this is a 40GB disk never grows. I don't want to waste that much disk space. There is no other way ? 13.12.2016, 09:53, "Shahar Havivi" :Okso try to import as preallocated and attach the log if you have any errors. Shahar. On Tue, Dec 13, 2016 at 8:47 AM, wrote: All my Data-Domains - FC SAN. Not ISCSI. 13.12.2016, 09:41, "Shahar Havivi" :What is the type of the target storage domain that you try to import to?(nfs or iscsi)if its iscsi try to change it to preallocate instead of thin-provision,also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM, wrote:# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o nullfsync /dev/sdaguestfsd: main_loop: proc 282 (internal_autosync) took 0.01 secondslibguestfs: trace: internal_autosync = 0libguestfs: sending SIGTERM to process 3338libguestfs: trace: shutdown = 0libguestfs: trace: closelibguestfs: closing guestfs handle 0x2880a10 (state 0)libguestfs: command: run: rmlibguestfs: command: run: \ -rf /tmp/libguestfsrxuByo[ 99.0] Checking if the guest needs BIOS or UEFI to boot[ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw)target_file = /var/tmp/null.lP6vGa/sdatarget_format = rawtarget_estimated_size = 13480052354target_overlay = /var/tmp/v2vovle81937.qcow2target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdkqemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%)virtual copying rate: 95364.1 M bits/secreal copying rate: 811.7 M bits/secsda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2%[ 126.0] Creating output metadata[ 126.0] Finishing offThe output is very voluminous. Errors are seen.13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" :> -bash: annotate-output: command not found>> 12.12.2016, 21:26, "Derek Atkins" :>> Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote:>>> I mount 5TB nfs-share to my host and tried to import OVA from this>>> mount-point.>>> Exact same error.>> Do the import process attempts to use 256G inside the Engine virtual>>> machine ???>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru">>> : 1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" :> Hi Derek>> # df -H /tmp/>> Filesystem Size Used Avail Use% Mounted on> /dev/cciss/c0d0p2 53G 5.7G 45G 12% />> But my OVA file size - 1.2G>> 12.12.2016, 17:26, "Derek Atkins" :>> Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where>> the>> virt-v2v does it work, but the error "Conversion of VM from exteral>> enironment failed: copy-disk stream closed unexpectedly" seems to>> imply an>> error there. I had no issues myself on 4.0.5 (modulo setfiles taking a very long>> time>> in a few cases). -derek On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote:>>> Hello oVirt guru`s!>> In the process of importing from OVA file (from>>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in>>> the web>>> console, then disappears.>> In the oVirt Engine log:>> ...>>> 2016-12-12 16:55:20,209 INFO>>> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand]>>> (default>>> task-28) [6179021a] Lock Acquired to object>>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>,>>> 2a3d20f9-502a-4c60-8c14-371456cd4c99=>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName>>> rhel_Vsp-4.4.0.GA-53>]',>>> sharedLocks='null'}'>>> 2016-12-12 16:55:20,326 WARN>>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector]>>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key>>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages'>>> ...>>> 2016-12-12 16:57:34,758 INFO>>>
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Please attach the log and will see what the error is. On Tue, Dec 13, 2016 at 9:01 AM, wrote: > Preallocated ? > I'm trying to import image of virtual appliance "HP 3PAR Virtual Service > Processor" > This virtual machine has drive 256GB. But really, this is a 40GB disk > never grows. I don't want to waste that much disk space. > > There is no other way ? > > 13.12.2016, 09:53, "Shahar Havivi" : > > Ok > so try to import as preallocated and attach the log if you have any errors. > > Shahar. > > On Tue, Dec 13, 2016 at 8:47 AM, wrote: > > > All my Data-Domains - FC SAN. Not ISCSI. > > > 13.12.2016, 09:41, "Shahar Havivi" : > > What is the type of the target storage domain that you try to import > to?(nfs or iscsi) > if its iscsi try to change it to preallocate instead of thin-provision, > also please attach the engine log if you have more problems. > > Shahar. > > On Tue, Dec 13, 2016 at 7:08 AM, wrote: > > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA from this > >>> mount-point. > >>> Exact same error. > >>> > >>> Do the import process attempts to use 256G inside the Engine virtual > >>> machine ??? > >>> > >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > >>> : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin > provision" > (see the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" > : > >Hi Derek > > > ># df -H /tmp/ > > > >Filesystem Size Used Avail Use% Mounted on > >/dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > > >But my OVA file size - 1.2G > > > >12.12.2016, 17:26, "Derek Atkins" : > >> Hi, > >> > >> Did you perhaps run out of disk space in /tmp? I'm not sure > where > >> the > >> virt-v2v does it work, but the error "Conversion of VM from > exteral > >> enironment failed: copy-disk stream closed unexpectedly" seems > to > >> imply an > >> error there. > >> > >> I had no issues myself on 4.0.5 (modulo setfiles taking a very > long > >> time > >> in a few cases). > >> > >> -derek > >> > >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru > wrote: > >>> Hello oVirt guru`s! > >>> > >>> In the process of importing from OVA file (from > >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first > appears in > >>> the web > >>> console, then disappears. > >>> > >>> In the oVirt Engine log: > >>> > >>> ... > >>> 2016-12-12 16:55:20,209 INFO > >>> [org.ovirt.engine.core.bll.exportimport. > ImportVmFromOvaCommand] > >>> (default > >>> task-28) [6179021a] Lock Acquired to object > >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53= >>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, > >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99= >>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName > >>> rhel_Vsp-4.4.0.GA-53>]', > >>> sharedLocks='null'}' > >>> 2016-12-12 16:55:20,326 WARN > >>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] > >>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message > key > >>>
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Preallocated ?I'm trying to import image of virtual appliance "HP 3PAR Virtual Service Processor"This virtual machine has drive 256GB. But really, this is a 40GB disk never grows. I don't want to waste that much disk space. There is no other way ? 13.12.2016, 09:53, "Shahar Havivi" :Okso try to import as preallocated and attach the log if you have any errors. Shahar. On Tue, Dec 13, 2016 at 8:47 AM,wrote: All my Data-Domains - FC SAN. Not ISCSI. 13.12.2016, 09:41, "Shahar Havivi" :What is the type of the target storage domain that you try to import to?(nfs or iscsi)if its iscsi try to change it to preallocate instead of thin-provision,also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM, wrote:# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o nullfsync /dev/sdaguestfsd: main_loop: proc 282 (internal_autosync) took 0.01 secondslibguestfs: trace: internal_autosync = 0libguestfs: sending SIGTERM to process 3338libguestfs: trace: shutdown = 0libguestfs: trace: closelibguestfs: closing guestfs handle 0x2880a10 (state 0)libguestfs: command: run: rmlibguestfs: command: run: \ -rf /tmp/libguestfsrxuByo[ 99.0] Checking if the guest needs BIOS or UEFI to boot[ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw)target_file = /var/tmp/null.lP6vGa/sdatarget_format = rawtarget_estimated_size = 13480052354target_overlay = /var/tmp/v2vovle81937.qcow2target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdkqemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%)virtual copying rate: 95364.1 M bits/secreal copying rate: 811.7 M bits/secsda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2%[ 126.0] Creating output metadata[ 126.0] Finishing offThe output is very voluminous. Errors are seen.13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" :> -bash: annotate-output: command not found>> 12.12.2016, 21:26, "Derek Atkins" :>> Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote:>>> I mount 5TB nfs-share to my host and tried to import OVA from this>>> mount-point.>>> Exact same error.>> Do the import process attempts to use 256G inside the Engine virtual>>> machine ???>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru">>> : 1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" :> Hi Derek>> # df -H /tmp/>> Filesystem Size Used Avail Use% Mounted on> /dev/cciss/c0d0p2 53G 5.7G 45G 12% />> But my OVA file size - 1.2G>> 12.12.2016, 17:26, "Derek Atkins" :>> Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where>> the>> virt-v2v does it work, but the error "Conversion of VM from exteral>> enironment failed: copy-disk stream closed unexpectedly" seems to>> imply an>> error there. I had no issues myself on 4.0.5 (modulo setfiles taking a very long>> time>> in a few cases). -derek On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote:>>> Hello oVirt guru`s!>> In the process of importing from OVA file (from>>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in>>> the web>>> console, then disappears.>> In the oVirt Engine log:>> ...>>> 2016-12-12 16:55:20,209 INFO>>> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand]>>> (default>>> task-28) [6179021a] Lock Acquired to object>>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>,>>> 2a3d20f9-502a-4c60-8c14-371456cd4c99=>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName>>> rhel_Vsp-4.4.0.GA-53>]',>>> sharedLocks='null'}'>>> 2016-12-12 16:55:20,326 WARN>>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector]>>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key>>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages'>>> ...>>> 2016-12-12 16:57:34,758 INFO>>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback]>>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral>>> enironment failed: copy-disk stream cl
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
All my Data-Domains - FC SAN. Not ISCSI. 13.12.2016, 09:41, "Shahar Havivi" :What is the type of the target storage domain that you try to import to?(nfs or iscsi)if its iscsi try to change it to preallocate instead of thin-provision,also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM,wrote:# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o nullfsync /dev/sdaguestfsd: main_loop: proc 282 (internal_autosync) took 0.01 secondslibguestfs: trace: internal_autosync = 0libguestfs: sending SIGTERM to process 3338libguestfs: trace: shutdown = 0libguestfs: trace: closelibguestfs: closing guestfs handle 0x2880a10 (state 0)libguestfs: command: run: rmlibguestfs: command: run: \ -rf /tmp/libguestfsrxuByo[ 99.0] Checking if the guest needs BIOS or UEFI to boot[ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw)target_file = /var/tmp/null.lP6vGa/sdatarget_format = rawtarget_estimated_size = 13480052354target_overlay = /var/tmp/v2vovle81937.qcow2target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdkqemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%)virtual copying rate: 95364.1 M bits/secreal copying rate: 811.7 M bits/secsda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2%[ 126.0] Creating output metadata[ 126.0] Finishing offThe output is very voluminous. Errors are seen.13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" :> -bash: annotate-output: command not found>> 12.12.2016, 21:26, "Derek Atkins" :>> Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote:>>> I mount 5TB nfs-share to my host and tried to import OVA from this>>> mount-point.>>> Exact same error.>> Do the import process attempts to use 256G inside the Engine virtual>>> machine ???>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru">>> : 1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" :> Hi Derek>> # df -H /tmp/>> Filesystem Size Used Avail Use% Mounted on> /dev/cciss/c0d0p2 53G 5.7G 45G 12% />> But my OVA file size - 1.2G>> 12.12.2016, 17:26, "Derek Atkins" :>> Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where>> the>> virt-v2v does it work, but the error "Conversion of VM from exteral>> enironment failed: copy-disk stream closed unexpectedly" seems to>> imply an>> error there. I had no issues myself on 4.0.5 (modulo setfiles taking a very long>> time>> in a few cases). -derek On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote:>>> Hello oVirt guru`s!>> In the process of importing from OVA file (from>>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in>>> the web>>> console, then disappears.>> In the oVirt Engine log:>> ...>>> 2016-12-12 16:55:20,209 INFO>>> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand]>>> (default>>> task-28) [6179021a] Lock Acquired to object>>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>,>>> 2a3d20f9-502a-4c60-8c14-371456cd4c99=>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName>>> rhel_Vsp-4.4.0.GA-53>]',>>> sharedLocks='null'}'>>> 2016-12-12 16:55:20,326 WARN>>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector]>>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key>>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages'>>> ...>>> 2016-12-12 16:57:34,758 INFO>>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback]>>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral>>> enironment failed: copy-disk stream closed unexpectedly>>> 2016-12-12 16:57:35,761 ERROR>>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand]>>> (DefaultQuartzScheduler8) [77b50303] Ending command>>> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with>>> failure.>>> 2016-12-12 16:57:35,827 INFO>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]>>> (DefaultQuartzScheduler8) [77b50
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Ok so try to import as preallocated and attach the log if you have any errors. Shahar. On Tue, Dec 13, 2016 at 8:47 AM, wrote: > > All my Data-Domains - FC SAN. Not ISCSI. > > > 13.12.2016, 09:41, "Shahar Havivi" : > > What is the type of the target storage domain that you try to import > to?(nfs or iscsi) > if its iscsi try to change it to preallocate instead of thin-provision, > also please attach the engine log if you have more problems. > > Shahar. > > On Tue, Dec 13, 2016 at 7:08 AM, wrote: > > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA from this > >>> mount-point. > >>> Exact same error. > >>> > >>> Do the import process attempts to use 256G inside the Engine virtual > >>> machine ??? > >>> > >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > >>> : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin > provision" > (see the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" > : > >Hi Derek > > > ># df -H /tmp/ > > > >Filesystem Size Used Avail Use% Mounted on > >/dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > > >But my OVA file size - 1.2G > > > >12.12.2016, 17:26, "Derek Atkins" : > >> Hi, > >> > >> Did you perhaps run out of disk space in /tmp? I'm not sure > where > >> the > >> virt-v2v does it work, but the error "Conversion of VM from > exteral > >> enironment failed: copy-disk stream closed unexpectedly" seems > to > >> imply an > >> error there. > >> > >> I had no issues myself on 4.0.5 (modulo setfiles taking a very > long > >> time > >> in a few cases). > >> > >> -derek > >> > >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru > wrote: > >>> Hello oVirt guru`s! > >>> > >>> In the process of importing from OVA file (from > >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first > appears in > >>> the web > >>> console, then disappears. > >>> > >>> In the oVirt Engine log: > >>> > >>> ... > >>> 2016-12-12 16:55:20,209 INFO > >>> [org.ovirt.engine.core.bll.exportimport. > ImportVmFromOvaCommand] > >>> (default > >>> task-28) [6179021a] Lock Acquired to object > >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53= >>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, > >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99= >>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName > >>> rhel_Vsp-4.4.0.GA-53>]', > >>> sharedLocks='null'}' > >>> 2016-12-12 16:55:20,326 WARN > >>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] > >>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message > key > >>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' > >>> ... > >>> 2016-12-12 16:57:34,758 INFO > >>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] > >>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from > exteral > >>> enironment failed: copy-disk stream closed unexpectedly > >>> 2016-12-12 16:57:35,761 ERROR >
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
What is the type of the target storage domain that you try to import to?(nfs or iscsi) if its iscsi try to change it to preallocate instead of thin-provision, also please attach the engine log if you have more problems. Shahar. On Tue, Dec 13, 2016 at 7:08 AM, wrote: > # LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova > /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null > > > fsync /dev/sda > guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds > libguestfs: trace: internal_autosync = 0 > libguestfs: sending SIGTERM to process 3338 > libguestfs: trace: shutdown = 0 > libguestfs: trace: close > libguestfs: closing guestfs handle 0x2880a10 (state 0) > libguestfs: command: run: rm > libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo > [ 99.0] Checking if the guest needs BIOS or UEFI to boot > [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) > target_file = /var/tmp/null.lP6vGa/sda > target_format = raw > target_estimated_size = 13480052354 > target_overlay = /var/tmp/v2vovle81937.qcow2 > target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp- > 4.4.0.GA-53-disk1.vmdk > qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' > '/var/tmp/null.lP6vGa/sda' > (100.00/100%) > virtual copying rate: 95364.1 M bits/sec > real copying rate: 811.7 M bits/sec > sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% > [ 126.0] Creating output metadata > [ 126.0] Finishing off > > > The output is very voluminous. Errors are seen. > > > > 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" >: > > -bash: annotate-output: command not found > > > > 12.12.2016, 21:26, "Derek Atkins" : > >> Hi, > >> > >> What happened when you ran the virt-v2v command I suggested? > >> > >> -derek > >> > >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > >>> I mount 5TB nfs-share to my host and tried to import OVA from this > >>> mount-point. > >>> Exact same error. > >>> > >>> Do the import process attempts to use 256G inside the Engine virtual > >>> machine ??? > >>> > >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > >>> : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin > provision" > (see the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" > : > >Hi Derek > > > ># df -H /tmp/ > > > >Filesystem Size Used Avail Use% Mounted on > >/dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > > >But my OVA file size - 1.2G > > > >12.12.2016, 17:26, "Derek Atkins" : > >> Hi, > >> > >> Did you perhaps run out of disk space in /tmp? I'm not sure > where > >> the > >> virt-v2v does it work, but the error "Conversion of VM from > exteral > >> enironment failed: copy-disk stream closed unexpectedly" seems > to > >> imply an > >> error there. > >> > >> I had no issues myself on 4.0.5 (modulo setfiles taking a very > long > >> time > >> in a few cases). > >> > >> -derek > >> > >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru > wrote: > >>> Hello oVirt guru`s! > >>> > >>> In the process of importing from OVA file (from > >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first > appears in > >>> the web > >>> console, then disappears. > >>> > >>> In the oVirt Engine log: > >>> > >>> ... > >>> 2016-12-12 16:55:20,209 INFO > >>> [org.ovirt.engine.core.bll.exportimport. > ImportVmFromOvaCommand] > >>> (default > >>> task-28) [6179021a] Lock Acquired to object > >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53= >>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, > >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99= >>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName > >>> rhel_Vsp-4.4.0.GA-53>]', > >>> sharedLocks='null'}' > >>> 2016-12-12 16:55:20,326 WARN > >>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] > >>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message > key > >>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' > >>> ... > >>> 2016-12-12 16:57:34,758 INFO > >>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] > >>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from > exteral > >>> enironment failed: copy-disk stream closed unexpectedly > >>> 2016-12-12 16:57:35,761 ERROR > >>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] > >>> (DefaultQuartzScheduler8) [77b50303] Ending command > >>> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' > with > >>> failure.
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
# LIBGUESTFS_BACKEND=direct virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null fsync /dev/sda guestfsd: main_loop: proc 282 (internal_autosync) took 0.01 seconds libguestfs: trace: internal_autosync = 0 libguestfs: sending SIGTERM to process 3338 libguestfs: trace: shutdown = 0 libguestfs: trace: close libguestfs: closing guestfs handle 0x2880a10 (state 0) libguestfs: command: run: rm libguestfs: command: run: \ -rf /tmp/libguestfsrxuByo [ 99.0] Checking if the guest needs BIOS or UEFI to boot [ 99.0] Copying disk 1/1 to /var/tmp/null.lP6vGa/sda (raw) target_file = /var/tmp/null.lP6vGa/sda target_format = raw target_estimated_size = 13480052354 target_overlay = /var/tmp/v2vovle81937.qcow2 target_overlay.ov_source = /var/tmp/ova.zJ6ks8/rhel_Vsp-4.4.0.GA-53-disk1.vmdk qemu-img convert -p -n -f qcow2 -O 'raw' '/var/tmp/v2vovle81937.qcow2' '/var/tmp/null.lP6vGa/sda' (100.00/100%) virtual copying rate: 95364.1 M bits/sec real copying rate: 811.7 M bits/sec sda: estimate 13480052354 (12.6G) versus actual 2339610624 (2.2G): 476.2% [ 126.0] Creating output metadata [ 126.0] Finishing off The output is very voluminous. Errors are seen. 13.12.2016, 07:59, "aleksey.maksi...@it-kb.ru" : > -bash: annotate-output: command not found > > 12.12.2016, 21:26, "Derek Atkins" : >> Hi, >> >> What happened when you ran the virt-v2v command I suggested? >> >> -derek >> >> On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: >>> I mount 5TB nfs-share to my host and tried to import OVA from this >>> mount-point. >>> Exact same error. >>> >>> Do the import process attempts to use 256G inside the Engine virtual >>> machine ??? >>> >>> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" >>> : 1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" : > Hi Derek > > # df -H /tmp/ > > Filesystem Size Used Avail Use% Mounted on > /dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > But my OVA file size - 1.2G > > 12.12.2016, 17:26, "Derek Atkins" : >> Hi, >> >> Did you perhaps run out of disk space in /tmp? I'm not sure where >> the >> virt-v2v does it work, but the error "Conversion of VM from exteral >> enironment failed: copy-disk stream closed unexpectedly" seems to >> imply an >> error there. >> >> I had no issues myself on 4.0.5 (modulo setfiles taking a very long >> time >> in a few cases). >> >> -derek >> >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: >>> Hello oVirt guru`s! >>> >>> In the process of importing from OVA file (from >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in >>> the web >>> console, then disappears. >>> >>> In the oVirt Engine log: >>> >>> ... >>> 2016-12-12 16:55:20,209 INFO >>> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] >>> (default >>> task-28) [6179021a] Lock Acquired to object >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99=>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName >>> rhel_Vsp-4.4.0.GA-53>]', >>> sharedLocks='null'}' >>> 2016-12-12 16:55:20,326 WARN >>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] >>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key >>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' >>> ... >>> 2016-12-12 16:57:34,758 INFO >>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] >>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral >>> enironment failed: copy-disk stream closed unexpectedly >>> 2016-12-12 16:57:35,761 ERROR >>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >>> (DefaultQuartzScheduler8) [77b50303] Ending command >>> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with >>> failure. >>> 2016-12-12 16:57:35,827 INFO >>> >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, >>> Call Stack: >>> null, Custom Event ID: -1, Message: Failed to convert Vm >>> rhel_Vsp-4.4.0.GA-53 >>> ... >>> 2016-12-12 16:57:38,458 INFO >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] >>> (DefaultQuartzScheduler8) [5237b44a] FINISH,
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
-bash: annotate-output: command not found 12.12.2016, 21:26, "Derek Atkins" : > Hi, > > What happened when you ran the virt-v2v command I suggested? > > -derek > > On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: >> I mount 5TB nfs-share to my host and tried to import OVA from this >> mount-point. >> Exact same error. >> >> Do the import process attempts to use 256G inside the Engine virtual >> machine ??? >> >> 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" >> : >>> 1.2G is real OVA image size. >>> 256G is virtual disk size. >>> Could this be a problem? >>> >>> But before I start the import, in the settings I choose "Thin provision" >>> (see the attached screenshot) >>> >>> 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" >>> : Hi Derek # df -H /tmp/ Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p2 53G 5.7G 45G 12% / But my OVA file size - 1.2G 12.12.2016, 17:26, "Derek Atkins" : > Hi, > > Did you perhaps run out of disk space in /tmp? I'm not sure where > the > virt-v2v does it work, but the error "Conversion of VM from exteral > enironment failed: copy-disk stream closed unexpectedly" seems to > imply an > error there. > > I had no issues myself on 4.0.5 (modulo setfiles taking a very long > time > in a few cases). > > -derek > > On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: >> Hello oVirt guru`s! >> >> In the process of importing from OVA file (from >> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in >> the web >> console, then disappears. >> >> In the oVirt Engine log: >> >> ... >> 2016-12-12 16:55:20,209 INFO >> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] >> (default >> task-28) [6179021a] Lock Acquired to object >> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, >> 2a3d20f9-502a-4c60-8c14-371456cd4c99=> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName >> rhel_Vsp-4.4.0.GA-53>]', >> sharedLocks='null'}' >> 2016-12-12 16:55:20,326 WARN >> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] >> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key >> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' >> ... >> 2016-12-12 16:57:34,758 INFO >> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] >> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral >> enironment failed: copy-disk stream closed unexpectedly >> 2016-12-12 16:57:35,761 ERROR >> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >> (DefaultQuartzScheduler8) [77b50303] Ending command >> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with >> failure. >> 2016-12-12 16:57:35,827 INFO >> >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, >> Call Stack: >> null, Custom Event ID: -1, Message: Failed to convert Vm >> rhel_Vsp-4.4.0.GA-53 >> ... >> 2016-12-12 16:57:38,458 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] >> (DefaultQuartzScheduler8) [5237b44a] FINISH, >> DeleteV2VJobVDSCommand, log >> id: 1a69f33d >> 2016-12-12 16:57:38,459 WARN >> [org.ovirt.engine.core.bll.lock.InMemoryLockManager] >> (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive >> lock >> which does not exist, lock key: >> '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' >> 2016-12-12 16:57:38,459 INFO >> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >> (DefaultQuartzScheduler8) [5237b44a] Lock freed to object >> >> 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99=> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName >> rhel_Vsp-4.4.0.GA-53>]', >> sharedLocks='null'}' >> 2016-12-12 16:57:38,463 ERROR >> >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, >> Call Stack: >> null, Custom Event ID: -1, Message: Failed to import Vm >> rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default >> >> What could be the problem? >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.phx.ovirt.org/mailman/listinfo/users > > -- > Derek Atkins 617-623-3745 > de...@ihtfp.com w
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi, What happened when you ran the virt-v2v command I suggested? -derek On Mon, December 12, 2016 12:32 pm, aleksey.maksi...@it-kb.ru wrote: > I mount 5TB nfs-share to my host and tried to import OVA from this > mount-point. > Exact same error. > > Do the import process attempts to use 256G inside the Engine virtual > machine ??? > > 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" > : >> 1.2G is real OVA image size. >> 256G is virtual disk size. >> Could this be a problem? >> >> But before I start the import, in the settings I choose "Thin provision" >> (see the attached screenshot) >> >> 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" >> : >>> Hi Derek >>> >>> # df -H /tmp/ >>> >>> Filesystem Size Used Avail Use% Mounted on >>> /dev/cciss/c0d0p2 53G 5.7G 45G 12% / >>> >>> But my OVA file size - 1.2G >>> >>> 12.12.2016, 17:26, "Derek Atkins" : Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where the virt-v2v does it work, but the error "Conversion of VM from exteral enironment failed: copy-disk stream closed unexpectedly" seems to imply an error there. I had no issues myself on 4.0.5 (modulo setfiles taking a very long time in a few cases). -derek On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: > Hello oVirt guru`s! > > In the process of importing from OVA file (from > /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in > the web > console, then disappears. > > In the oVirt Engine log: > > ... > 2016-12-12 16:55:20,209 INFO > [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] > (default > task-28) [6179021a] Lock Acquired to object > 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53= ACTION_TYPE_FAILED_NAME_ALREADY_USED>, > 2a3d20f9-502a-4c60-8c14-371456cd4c99= ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName > rhel_Vsp-4.4.0.GA-53>]', > sharedLocks='null'}' > 2016-12-12 16:55:20,326 WARN > [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] > (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key > 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' > ... > 2016-12-12 16:57:34,758 INFO > [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] > (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral > enironment failed: copy-disk stream closed unexpectedly > 2016-12-12 16:57:35,761 ERROR > [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] > (DefaultQuartzScheduler8) [77b50303] Ending command > 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with > failure. > 2016-12-12 16:57:35,827 INFO > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, > Call Stack: > null, Custom Event ID: -1, Message: Failed to convert Vm > rhel_Vsp-4.4.0.GA-53 > ... > 2016-12-12 16:57:38,458 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] > (DefaultQuartzScheduler8) [5237b44a] FINISH, > DeleteV2VJobVDSCommand, log > id: 1a69f33d > 2016-12-12 16:57:38,459 WARN > [org.ovirt.engine.core.bll.lock.InMemoryLockManager] > (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive > lock > which does not exist, lock key: > '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' > 2016-12-12 16:57:38,459 INFO > [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] > (DefaultQuartzScheduler8) [5237b44a] Lock freed to object > 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99= ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName > rhel_Vsp-4.4.0.GA-53>]', > sharedLocks='null'}' > 2016-12-12 16:57:38,463 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, > Call Stack: > null, Custom Event ID: -1, Message: Failed to import Vm > rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default > > What could be the problem? > ___ > Users mailing list > Users@ovirt.org > http://lists.phx.ovirt.org/mailman/listinfo/users -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant > -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/m
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
I mount 5TB nfs-share to my host and tried to import OVA from this mount-point. Exact same error. Do the import process attempts to use 256G inside the Engine virtual machine ??? 12.12.2016, 18:01, "aleksey.maksi...@it-kb.ru" : > 1.2G is real OVA image size. > 256G is virtual disk size. > Could this be a problem? > > But before I start the import, in the settings I choose "Thin provision" (see > the attached screenshot) > > 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" : >> Hi Derek >> >> # df -H /tmp/ >> >> Filesystem Size Used Avail Use% Mounted on >> /dev/cciss/c0d0p2 53G 5.7G 45G 12% / >> >> But my OVA file size - 1.2G >> >> 12.12.2016, 17:26, "Derek Atkins" : >>> Hi, >>> >>> Did you perhaps run out of disk space in /tmp? I'm not sure where the >>> virt-v2v does it work, but the error "Conversion of VM from exteral >>> enironment failed: copy-disk stream closed unexpectedly" seems to imply an >>> error there. >>> >>> I had no issues myself on 4.0.5 (modulo setfiles taking a very long time >>> in a few cases). >>> >>> -derek >>> >>> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: Hello oVirt guru`s! In the process of importing from OVA file (from /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in the web console, then disappears. In the oVirt Engine log: ... 2016-12-12 16:55:20,209 INFO [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] (default task-28) [6179021a] Lock Acquired to object 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, 2a3d20f9-502a-4c60-8c14-371456cd4c99=>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', sharedLocks='null'}' 2016-12-12 16:55:20,326 WARN [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' ... 2016-12-12 16:57:34,758 INFO [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral enironment failed: copy-disk stream closed unexpectedly 2016-12-12 16:57:35,761 ERROR [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] (DefaultQuartzScheduler8) [77b50303] Ending command 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with failure. 2016-12-12 16:57:35,827 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, Call Stack: null, Custom Event ID: -1, Message: Failed to convert Vm rhel_Vsp-4.4.0.GA-53 ... 2016-12-12 16:57:38,458 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] (DefaultQuartzScheduler8) [5237b44a] FINISH, DeleteV2VJobVDSCommand, log id: 1a69f33d 2016-12-12 16:57:38,459 WARN [org.ovirt.engine.core.bll.lock.InMemoryLockManager] (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive lock which does not exist, lock key: '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' 2016-12-12 16:57:38,459 INFO [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] (DefaultQuartzScheduler8) [5237b44a] Lock freed to object 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99=>>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', sharedLocks='null'}' 2016-12-12 16:57:38,463 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, Call Stack: null, Custom Event ID: -1, Message: Failed to import Vm rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default What could be the problem? ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users >>> >>> -- >>> Derek Atkins 617-623-3745 >>> de...@ihtfp.com www.ihtfp.com >>> Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
1.2G is real OVA image size. 256G is virtual disk size. Could this be a problem? But before I start the import, in the settings I choose "Thin provision" (see the attached screenshot) 12.12.2016, 17:47, "aleksey.maksi...@it-kb.ru" : > Hi Derek > > # df -H /tmp/ > > Filesystem Size Used Avail Use% Mounted on > /dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > But my OVA file size - 1.2G > > 12.12.2016, 17:26, "Derek Atkins" : >> Hi, >> >> Did you perhaps run out of disk space in /tmp? I'm not sure where the >> virt-v2v does it work, but the error "Conversion of VM from exteral >> enironment failed: copy-disk stream closed unexpectedly" seems to imply an >> error there. >> >> I had no issues myself on 4.0.5 (modulo setfiles taking a very long time >> in a few cases). >> >> -derek >> >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: >>> Hello oVirt guru`s! >>> >>> In the process of importing from OVA file (from >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in the web >>> console, then disappears. >>> >>> In the oVirt Engine log: >>> >>> ... >>> 2016-12-12 16:55:20,209 INFO >>> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] (default >>> task-28) [6179021a] Lock Acquired to object >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99=>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', >>> sharedLocks='null'}' >>> 2016-12-12 16:55:20,326 WARN >>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] >>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key >>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' >>> ... >>> 2016-12-12 16:57:34,758 INFO >>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] >>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral >>> enironment failed: copy-disk stream closed unexpectedly >>> 2016-12-12 16:57:35,761 ERROR >>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >>> (DefaultQuartzScheduler8) [77b50303] Ending command >>> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with failure. >>> 2016-12-12 16:57:35,827 INFO >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, Call Stack: >>> null, Custom Event ID: -1, Message: Failed to convert Vm >>> rhel_Vsp-4.4.0.GA-53 >>> ... >>> 2016-12-12 16:57:38,458 INFO >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] >>> (DefaultQuartzScheduler8) [5237b44a] FINISH, DeleteV2VJobVDSCommand, log >>> id: 1a69f33d >>> 2016-12-12 16:57:38,459 WARN >>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager] >>> (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive lock >>> which does not exist, lock key: '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' >>> 2016-12-12 16:57:38,459 INFO >>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >>> (DefaultQuartzScheduler8) [5237b44a] Lock freed to object >>> 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99=>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', >>> sharedLocks='null'}' >>> 2016-12-12 16:57:38,463 ERROR >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, Call Stack: >>> null, Custom Event ID: -1, Message: Failed to import Vm >>> rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default >>> >>> What could be the problem? >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.phx.ovirt.org/mailman/listinfo/users >> >> -- >> Derek Atkins 617-623-3745 >> de...@ihtfp.com www.ihtfp.com >> Computer and Internet Security Consultant___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi Derek # df -H /tmp/ Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p2 53G 5.7G 45G 12% / But my OVA file size - 1.2G 12.12.2016, 17:26, "Derek Atkins" : > Hi, > > Did you perhaps run out of disk space in /tmp? I'm not sure where the > virt-v2v does it work, but the error "Conversion of VM from exteral > enironment failed: copy-disk stream closed unexpectedly" seems to imply an > error there. > > I had no issues myself on 4.0.5 (modulo setfiles taking a very long time > in a few cases). > > -derek > > On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: >> Hello oVirt guru`s! >> >> In the process of importing from OVA file (from >> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in the web >> console, then disappears. >> >> In the oVirt Engine log: >> >> ... >> 2016-12-12 16:55:20,209 INFO >> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] (default >> task-28) [6179021a] Lock Acquired to object >> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, >> 2a3d20f9-502a-4c60-8c14-371456cd4c99=> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', >> sharedLocks='null'}' >> 2016-12-12 16:55:20,326 WARN >> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] >> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key >> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' >> ... >> 2016-12-12 16:57:34,758 INFO >> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] >> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral >> enironment failed: copy-disk stream closed unexpectedly >> 2016-12-12 16:57:35,761 ERROR >> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >> (DefaultQuartzScheduler8) [77b50303] Ending command >> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with failure. >> 2016-12-12 16:57:35,827 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, Call Stack: >> null, Custom Event ID: -1, Message: Failed to convert Vm >> rhel_Vsp-4.4.0.GA-53 >> ... >> 2016-12-12 16:57:38,458 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] >> (DefaultQuartzScheduler8) [5237b44a] FINISH, DeleteV2VJobVDSCommand, log >> id: 1a69f33d >> 2016-12-12 16:57:38,459 WARN >> [org.ovirt.engine.core.bll.lock.InMemoryLockManager] >> (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive lock >> which does not exist, lock key: '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' >> 2016-12-12 16:57:38,459 INFO >> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >> (DefaultQuartzScheduler8) [5237b44a] Lock freed to object >> 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99=> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', >> sharedLocks='null'}' >> 2016-12-12 16:57:38,463 ERROR >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, Call Stack: >> null, Custom Event ID: -1, Message: Failed to import Vm >> rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default >> >> What could be the problem? >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.phx.ovirt.org/mailman/listinfo/users > > -- > Derek Atkins 617-623-3745 > de...@ihtfp.com www.ihtfp.com > Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Try running virt-v2v by hand on your host: LIBGUESTFS_BACKEND=direct annotate-output virt-v2v -v -x -i ova /tmp/rhel_Vsp-4.4.0.GA-53.ova -of raw -o null Maybe it will give you more insight into the error? -derek On Mon, December 12, 2016 9:47 am, aleksey.maksi...@it-kb.ru wrote: > > Hi Derek > > # df -H /tmp/ > > Filesystem Size Used Avail Use% Mounted on > /dev/cciss/c0d0p2 53G 5.7G 45G 12% / > > But my OVA file size - 1.2G > > 12.12.2016, 17:26, "Derek Atkins" : >> Hi, >> >> Did you perhaps run out of disk space in /tmp? I'm not sure where the >> virt-v2v does it work, but the error "Conversion of VM from exteral >> enironment failed: copy-disk stream closed unexpectedly" seems to imply >> an >> error there. >> >> I had no issues myself on 4.0.5 (modulo setfiles taking a very long time >> in a few cases). >> >> -derek >> >> On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: >>> Hello oVirt guru`s! >>> >>> In the process of importing from OVA file (from >>> /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in the >>> web >>> console, then disappears. >>> >>> In the oVirt Engine log: >>> >>> ... >>> 2016-12-12 16:55:20,209 INFO >>> [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] >>> (default >>> task-28) [6179021a] Lock Acquired to object >>> 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53=>> ACTION_TYPE_FAILED_NAME_ALREADY_USED>, >>> 2a3d20f9-502a-4c60-8c14-371456cd4c99=>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName >>> rhel_Vsp-4.4.0.GA-53>]', >>> sharedLocks='null'}' >>> 2016-12-12 16:55:20,326 WARN >>> [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] >>> (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key >>> 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' >>> ... >>> 2016-12-12 16:57:34,758 INFO >>> [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] >>> (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral >>> enironment failed: copy-disk stream closed unexpectedly >>> 2016-12-12 16:57:35,761 ERROR >>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >>> (DefaultQuartzScheduler8) [77b50303] Ending command >>> 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with >>> failure. >>> 2016-12-12 16:57:35,827 INFO >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, Call >>> Stack: >>> null, Custom Event ID: -1, Message: Failed to convert Vm >>> rhel_Vsp-4.4.0.GA-53 >>> ... >>> 2016-12-12 16:57:38,458 INFO >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] >>> (DefaultQuartzScheduler8) [5237b44a] FINISH, DeleteV2VJobVDSCommand, >>> log >>> id: 1a69f33d >>> 2016-12-12 16:57:38,459 WARN >>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager] >>> (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive lock >>> which does not exist, lock key: >>> '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' >>> 2016-12-12 16:57:38,459 INFO >>> [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] >>> (DefaultQuartzScheduler8) [5237b44a] Lock freed to object >>> 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99=>> ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName >>> rhel_Vsp-4.4.0.GA-53>]', >>> sharedLocks='null'}' >>> 2016-12-12 16:57:38,463 ERROR >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, Call >>> Stack: >>> null, Custom Event ID: -1, Message: Failed to import Vm >>> rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default >>> >>> What could be the problem? >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.phx.ovirt.org/mailman/listinfo/users >> >> -- >> Derek Atkins 617-623-3745 >> de...@ihtfp.com www.ihtfp.com >> Computer and Internet Security Consultant > -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How can I import VMWare OVA file to oVirt 4.0?
Hi, Did you perhaps run out of disk space in /tmp? I'm not sure where the virt-v2v does it work, but the error "Conversion of VM from exteral enironment failed: copy-disk stream closed unexpectedly" seems to imply an error there. I had no issues myself on 4.0.5 (modulo setfiles taking a very long time in a few cases). -derek On Mon, December 12, 2016 9:19 am, aleksey.maksi...@it-kb.ru wrote: > > > Hello oVirt guru`s! > > In the process of importing from OVA file (from > /tmp/rhel_Vsp-4.4.0.GA-53.ova in one of hosts) VM first appears in the web > console, then disappears. > > In the oVirt Engine log: > > > ... > 2016-12-12 16:55:20,209 INFO > [org.ovirt.engine.core.bll.exportimport.ImportVmFromOvaCommand] (default > task-28) [6179021a] Lock Acquired to object > 'EngineLock:{exclusiveLocks='[rhel_Vsp-4.4.0.GA-53= ACTION_TYPE_FAILED_NAME_ALREADY_USED>, > 2a3d20f9-502a-4c60-8c14-371456cd4c99= ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', > sharedLocks='null'}' > 2016-12-12 16:55:20,326 WARN > [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] > (org.ovirt.thread.pool-6-thread-35) [6179021a] The message key > 'ImportVmFromOva' is missing from 'bundles/ExecutionMessages' > ... > 2016-12-12 16:57:34,758 INFO > [org.ovirt.engine.core.bll.exportimport.ConvertVmCallback] > (DefaultQuartzScheduler4) [27df05b8] Conversion of VM from exteral > enironment failed: copy-disk stream closed unexpectedly > 2016-12-12 16:57:35,761 ERROR > [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] > (DefaultQuartzScheduler8) [77b50303] Ending command > 'org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand' with failure. > 2016-12-12 16:57:35,827 INFO > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (DefaultQuartzScheduler8) [77b50303] Correlation ID: 3187db75, Call Stack: > null, Custom Event ID: -1, Message: Failed to convert Vm > rhel_Vsp-4.4.0.GA-53 > ... > 2016-12-12 16:57:38,458 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.DeleteV2VJobVDSCommand] > (DefaultQuartzScheduler8) [5237b44a] FINISH, DeleteV2VJobVDSCommand, log > id: 1a69f33d > 2016-12-12 16:57:38,459 WARN > [org.ovirt.engine.core.bll.lock.InMemoryLockManager] > (DefaultQuartzScheduler8) [5237b44a] Trying to release exclusive lock > which does not exist, lock key: '2a3d20f9-502a-4c60-8c14-371456cd4c99VM' > 2016-12-12 16:57:38,459 INFO > [org.ovirt.engine.core.bll.exportimport.ConvertOvaCommand] > (DefaultQuartzScheduler8) [5237b44a] Lock freed to object > 'EngineLock:{exclusiveLocks='[2a3d20f9-502a-4c60-8c14-371456cd4c99= ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName rhel_Vsp-4.4.0.GA-53>]', > sharedLocks='null'}' > 2016-12-12 16:57:38,463 ERROR > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > (DefaultQuartzScheduler8) [5237b44a] Correlation ID: 3187db75, Call Stack: > null, Custom Event ID: -1, Message: Failed to import Vm > rhel_Vsp-4.4.0.GA-53 to Data Center Default, Cluster Default > > What could be the problem? > ___ > Users mailing list > Users@ovirt.org > http://lists.phx.ovirt.org/mailman/listinfo/users > -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ Users mailing list Users@ovirt.org http://lists.phx.ovirt.org/mailman/listinfo/users