Re: [SOGo] is postfix/dovecot/SOGo reliable with Outlook 2010 and 2013?
> ... In a mixed world with Outlook 2013 (ActiveSync), > ... > As far as we have found out the problem is Outlook and Microsoft's > loose interpretation of standards. But that does not help us if users > insist on using Outlook. > ... Thank you for your reply and informations. What are the problems? Are the emails synchroniced via ActiveSync or only the Calendards and Contacts? I plan to setup a test environment with one server and one client. Do you think i will see the problems or will they occure only rarely or when sharing data between different accounts? regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
[SOGo] is postfix/dovecot/SOGo reliable with Outlook 2010 and 2013?
Hi I support a few small organisations. They are using Outlook 2007 on postfix/dovecot (imap). As groupware i installed eGroupware and SOGo. For now it's only used for out of office notes, but this should change. Therefore i planned to use a CalDav/CardDav-Addin for Outlook. Unfortunately on newer Outlook versions some problems occured. Emails were lost and Emails are not visible in Outlook although they are visible in the webmail. I guess, the newer Outlooks are horrible bad IMAP-Clients. I guess it would be better to use MAPI or ActiveSync. What is your experience? And which will do the better job? kindly regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Deprovision openchange
Unfortunately this issue is still open. Nobody here who can help me? kindly regards Mario On Fri, Aug 21, 2015 at 10:15:39AM +0200, Mario Gruenwald wrote: > Hi > > I guess my openchange config is broken. Therefore i want to cleanup and > restart from beginning. Problem is: > > # openchange_provision --deprovision > [!] Unable to unregister this server, it's being used for: handling 2 > mailboxes > > I already searched in documentation and forums without success. There are a > lot of commands (openchangeclient, mapiprofile, sogo-tool, ...). I don't know > which to use and/or doesn't find the correct options. > > I am even not able to list which users are in openchange and which mailboxes > are handled. > > Anyone out there, who can help me? > > regards > Mario -- users@sogo.nu https://inverse.ca/sogo/lists
[SOGo] Deprovision openchange
Hi I guess my openchange config is broken. Therefore i want to cleanup and restart from beginning. Problem is: # openchange_provision --deprovision [!] Unable to unregister this server, it's being used for: handling 2 mailboxes I already searched in documentation and forums without success. There are a lot of commands (openchangeclient, mapiprofile, sogo-tool, ...). I don't know which to use and/or doesn't find the correct options. I am even not able to list which users are in openchange and which mailboxes are handled. Anyone out there, who can help me? regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
[SOGo] Debian Wheezy, Openchange, samba log: ERROR: Storage backend initialization failed
Hi Again, i tried to install SOGo/OpenChange using Debian wheezy for use with Outlook 2007. But this time i already fail testing it with openchangeclient. /var/log/samba/log.samba: [2014/11/23 09:55:38.142477, 0] MAPIStoreSOGo.m:192(sogo_backend_init) [SOGo: sogo_backend_init:192] backend init SUCCESS. Current thread: 0xb8bdba18, pid: 30344 [2014/11/23 09:55:38.144478, 0] mapiproxy/libmapistore/mapistore_namedprops.c:67(mapistore_namedprops_init) [WARN][mapiproxy/libmapistore/mapistore_namedprops.c:67]: Missing mapistore:namedproperties option [2014/11/23 09:55:38.144770, 0] mapiproxy/libmapistore/mapistore_namedprops.c:68(mapistore_namedprops_init) [WARN][mapiproxy/libmapistore/mapistore_namedprops.c:68]: Assigned by default to 'ldb' [2014/11/23 09:55:38.145057, 0] mapiproxy/libmapistore/mapistore_interface.c:105(mapistore_init) [mapistore_init:105] ERROR: Storage backend initialization failed [2014/11/23 09:55:38.145342, 0] mapiproxy/servers/default/emsmdb/emsmdbp.c:153(emsmdbp_init) [emsmdbp_init:153]: MAPISTORE initialization failed [2014/11/23 09:55:38.145926, 0] ../lib/util/fault.c:144(smb_panic_default) PANIC: unable to initialize emsmdbp context /etc/samba/smb.conf: [global] log level = 1 workgroup = VC-GRAZ realm = blaeser.vc-graz.ac.at netbios name = BLAESER server role = active directory domain controller dns forwarder = 129.27.2.3 server services = rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbind, ntp_signd, kcc, dnsupdate, dns, smb idmap_ldb:use rfc2307 = yes dcerpc_mapiproxy:server = true dcerpc_mapiproxy:interfaces = exchange_emsmdb, exchange_nsp, exchange_ds_rfr dcerpc endpoint servers = mapiproxy, epmapper, wkssvc, rpcecho, samr, netlogon, lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey, dnsserver, winreg, srvsvc [netlogon] path = /var/lib/samba/sysvol/blaeser.vc-graz.ac.at/scripts read only = No [sysvol] path = /var/lib/samba/sysvol read only = No # openchangeclient -m SPNEGO(gssapi_krb5) creating NEG_TOKEN_INIT failed: NT_STATUS_NO_LOGON_SERVERS SPNEGO(gssapi_krb5) creating NEG_TOKEN_INIT failed: NT_STATUS_NO_LOGON_SERVERS SPNEGO(gssapi_krb5) creating NEG_TOKEN_INIT failed: NT_STATUS_NO_LOGON_SERVERS EcDoConnect : UNKNOWN_ENUM_VALUE (0x90376F8) MapiLogonEx : MAPI_E_LOGON_FAILED (0x80040111) # dpkg -l | grep -E 'postfix|dovecot|openchange|sogo|ocsmana' | cut -c -60 ii dovecot-core 1:2.2.9-1~bpo70+1 ii dovecot-imapd1:2.2.9-1~bpo70+1 ii dovecot-managesieved 1:2.2.9-1~bpo70+1 ii dovecot-sieve1:2.2.9-1~bpo70+1 ii openchangeclient 1:2.2-5 ii openchangeproxy 1:2.2-5 ii openchangeserver 1:2.2-5 ii postfix 2.9.6-2 ii postfix-doc 2.9.6-2 ii python-ocsmanager1:2.2-5 ii sogo:i3862.2.10.20141122-1 ii sogo-openchange:i386 2.2.10.20141122-1 What is working: postfix, dovecot, samba-ldap, sogo-webinterface Any ideas? kindly regards, Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Updated packages/documentation
On Thu, Nov 20, 2014 at 11:43:11AM +0100, Martin Simovic wrote: > ... > "Debian-based distributions won't have OCSManager/RPC Proxy support in v2.2.10 > but hopefully that will be resolved days after it's released." What's the task of these Packages? Are they only for outlook anywhere? In other words: Which features lack SOGo on debian-based distributions? regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Upcoming v2.2.9 release + v3 release
On Sun, Sep 28, 2014 at 07:55:28PM -0400, Ludovic Marcotte wrote: > Not sure if you're referring to the OpenChange/Samba crash Yes, i refered to this issue. > but if so, the > updated packages didn't make it in v2.2.9 so you'll have to be a bit more > patient. Nightly builds should be available with the updates in a couple of > days. Cool, i am looking forward for my next test. Please announce on the mailing list, when the updates are online. regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Upcoming v2.2.9 release + v3 release
On Mon, Sep 15, 2014 at 07:30:22PM -0400, Ludovic Marcotte wrote: > Wait for v2.2.9 with the updated packages. They should be available in > the next 2 weeks. I tested a few minutes ago, using the nightly builds. Still the same crash. If you guide me and are interested, i can provide more informations or repeat my test using an other configuration (only Debian Wheezy or Jessie). regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Upcoming v2.2.9 release + v3 release
Hi Today i tested 2.2.8 und 2.2.9.20140914-1 against Outlook 2007. After first login in Outlook and after few seconds and a lot of lines in samba.log i got snip ... [2014/09/14 23:11:59, 0] mapiproxy/libmapiproxy/openchangedb_property.c:668(openchangedb_property_get_attribute) [openchangedb_property_get_attribute:668]: Unsupported property tag '0x36de0003' [2014/09/14 23:11:59, 0] mapiproxy/libmapistore/mapistore_interface.c:339(mapistore_del_context) mapistore_del_context: context_id to del is 1 [2014/09/14 23:11:59, 0] ../lib/util/fault.c:72(fault_report) === [2014/09/14 23:11:59, 0] ../lib/util/fault.c:73(fault_report) INTERNAL ERROR: Signal 11 in pid 18152 (4.0.1) Please read the Trouble-Shooting section of the Samba HOWTO [2014/09/14 23:11:59, 0] ../lib/util/fault.c:75(fault_report) === ... snip On restart of samba4 this behavior repeats. On all of my tests of sogo, i started using 2.0, the behavior was equal. Maybe it's my fault, but software should write an error message, and shouldn't crash. My system is Debian Wheezy. My last attempts to provide a relevant stack trace were not successful. What can i do, to solve the problem? regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Strange problem on installing Openchange server
On Thu, Jul 03, 2014 at 04:05:33PM +0100, Rob Kemp wrote: > I had installed and configured Samba 4, yes, and it was working (I think). > But the trouble started only when I installed Openchange. Hi My last attempts with Debian Wheezy and Debian Jessie shows, that samba4 often crash using OpenChange. Unfortunately i didn't finish investigating yet, due to lack of time. You should check your samba4 log for "PANIC: internal error" or similar messages. If your samba4 does name resolution, you can should lso check, whether it's working or not, i.e. using host www.sogo.nu Because we use similar setups, maybe we can work together. best regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Outlook and Samba panic
On Thu, Mar 20, 2014 at 09:26:20AM +0100, Marcin Kukiełka wrote: > I'm using samba version 4.1.5 and openchange version 2.0 (Zentyal 3.4) > and it happens on every version I tested. I have the same problems. Unfortunately i couldn't spend time on it for the last weeks. My last idea was to follow the suggestion from Julien (see below). I guess it is still valid for current version of Zentyal. I guess you should generate such a crash report. best regards, Mario >From Julien: > Hi Mario, > > If you are willing (and able) to reproduce this issue with Zentyal > Server 3.3 [1][2], we have a built-in system to auto-generate crash > reports with all necessary information required to investigate further. > > We are currently in a stabilization phase where we chase down all > remaining/obvious bugs and every contributions to this effort (reports > or patches :p) is warmly welcomed! > > Br, > Julien. > > [1] http://www.zentyal.org/server/ > [2] http://doc.zentyal.org/3.3/en/openchange.html -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] sope/sogo for debian jessie
I already installed using a mix of packages from wheezy, jessie and sogo. Unfortunately samba4 is crashing very often. For installation i had to explicit select some Versions, for resolving conflicts. best regards Mario On Fri, Mar 07, 2014 at 09:55:02AM +0100, Clement Wong wrote: > Hi, > > I’m trying to get sogo/sogo-openchange to work under debian jessie towards > debian official openchange/samba. > Does anyone have ready package or can you share debian config nightly build > is using so i can modify and build? > Thanks. > > Clement-- > users@sogo.nu > https://inverse.ca/sogo/lists -- users@sogo.nu https://inverse.ca/sogo/lists
Re: [SOGo] Upcoming v2.2 release, Outlook 2007, OpenChange
Hi
Unfortunately, I still fail to get a working setup for
Debian wheezy
Win7, Outllook 2007
When i start Outlook samba crashes after short time. I attach the gdb
backtrace.
If i start samba with single process, samba hangs.
Any ideas how to solve?
Is there another way to use sogo via Outlook? Imap and funambol is no
solution, because of some limitations.
I can provide more information, if helpful. Please tell me which/how.
kindly regards
Mario
--
users@sogo.nu
https://inverse.ca/sogo/lists/usr/local/bin/gdb_backtrace_wrapper started, parameters 14041
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1".
0xb77a8424 in __kernel_vsyscall ()
#0 0xb77a8424 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb6fe0b2b in waitpid () from /lib/i386-linux-gnu/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb6f7bbf3 in ?? () from /lib/i386-linux-gnu/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb6f7bf82 in system () from /lib/i386-linux-gnu/i686/cmov/libc.so.6
No symbol table info available.
#4 0xb778365d in system () from /lib/i386-linux-gnu/i686/cmov/libpthread.so.0
No symbol table info available.
#5 0xb775c690 in smb_panic () from /usr/lib/i386-linux-gnu/libsamba-util.so.0
No symbol table info available.
#6 0xb775c821 in ?? () from /usr/lib/i386-linux-gnu/libsamba-util.so.0
No symbol table info available.
#7
No symbol table info available.
#8 0xb1df062a in oxcfxics_ndr_push_simple_data (ndr=0xa5e47a8, prop_type=3,
value=0x34) at mapiproxy/servers/default/emsmdb/oxcfxics.c:167
string_len = 24
saved_flags = 0
bin_value = 0x4
__FUNCTION__ = "oxcfxics_ndr_push_simple_data"
#9 0xb1df0ebf in oxcfxics_ndr_push_properties (ndr=0xa5e47a8,
cutmarks_ndr=0xa7b4f68, nprops_ctx=0x98e6708, properties=0xbfdef69c,
data_pointers=0xaa01e44, retvals=0xa26f234) at
mapiproxy/servers/default/emsmdb/oxcfxics.c:346
i = 1
j = 170626280
min_value_buffer = 0
property = PidTagAccessLevel
nameid = 0x8
bin_array = 0x1cf24d6
unicode_array = 0xb21c132e
short_array = 0x52f638ef
long_array = 0x9e02
ui8_array = 0x0
prop_type = 3
propID = 46946
retval = 161979864
saved_flags = 3076767732
__FUNCTION__ = "oxcfxics_ndr_push_properties"
#10 0xb1df52ec in oxcfxics_push_folderChange (emsmdbp_ctx=0xa043210,
synccontext=0x9e1c458, owner=0xa89f110 "grueni",
topmost_folder_object=0x94f9648, sync_data=0x9a79dd8, folder_object=0x94f9648)
at mapiproxy/servers/default/emsmdb/oxcfxics.c:1442
mem_ctx = 0x9ce9ad0
table_object = 0xa0b1138
subfolder_object = 0xa26f218
eid = 1585267068834414593
cn = 173731427123200
predecessors_data = {cb = 1024, lpb = 0x430 }
bin_data = 0xa26ffe0
lm_time = 0xa3cd4d0
nt_time = 13036341743000
unix_time = 1391868143
contextID = -1
i = 4
j = 7
retvals = 0xa26f218
header_retvals = 0xa3ccd48
data_pointers = 0xaa01e28
header_data_pointers = 0xa26f3e8
query_props = {cValues = 37, aulPropTag = 0x9e047b4}
replica_guid = {time_low = 798995861, time_mid = 54349,
time_hi_and_version = 17057, clock_seq = "\234\232", node = "\242\313I$4\r"}
__FUNCTION__ = "oxcfxics_push_folderChange"
#11 0xb1df5625 in oxcfxics_prepare_synccontext_with_folderChange
(synccontext=0x9e1c458, mem_ctx=0x921c9c0, emsmdbp_ctx=0xa043210,
owner=0xa89f110 "grueni", parent_object=0x94f9648) at
mapiproxy/servers/default/emsmdb/oxcfxics.c:1489
sync_data = 0x9a79dd8
new_idset = 0x11
old_idset = 0xb2238459
#12 0xb1df615e in oxcfxics_fill_synccontext_fasttransfer_response
(response=0xad4c8c8, request_buffer_size=31680, mem_ctx=0x921c9c0,
synccontext=0x9e1c458, parent_object=0x94f9648) at
mapiproxy/servers/default/emsmdb/oxcfxics.c:1710
owner = 0xa89f110 "grueni"
old_chunk_size = 2988636124
new_chunk_size = 165072352
buffer_size = 31680
end_of_buffer = false
joint_buffer = {data = 0xad14770 "p\005", length = 170978080}
__FUNCTION__ = "oxcfxics_fill_synccontext_fasttransfer_response"
#13 0xb1df6589 in EcDoRpc_RopFastTransferSourceGetBuffer (mem_ctx=0x921c9c0,
emsmdbp_ctx=0xa043210, mapi_req=0xacfc6cc, mapi_repl=0xad4c8c0,
handles=0x968c268, size=0xbfdef83a) at
mapiproxy/servers/default/emsmdb/oxcfxics.c:1804
retval = MAPI_E_SUCCESS
handle_id = 4
object_handle = 0x9d6cde0
object = 0xa39e638
request = 0xacfc6d0
response = 0xad4c8c8
request_buffer_size = 31680
data = 0xa39e638
__FUNCTION__ = "EcDoRpc_RopFastTransferSourceGetBuffer"
#14 0xb1dda075 in EcDoRpc_process_transaction (mem_ctx=0x921c9c0,
emsmdbp_ctx=0xa043210, mapi_request=0x948a6d8) at
mapiproxy/servers/default/emsmdb/dcesrv
Re: [SOGo] openchange, samba crash
Hi Thanx for your reply and help. On Mon, Dec 16, 2013 at 05:48:00PM +0100, ABBAS Alain wrote: > did you try to clean the cache by : openchange_user_clean user ? No, I didn't knew of it. I tried openchange_user_cleanup user and i found out, that python-mysqldb package was not installed. So i installed it and upgraded the other packages. One of them was dovecot from 2.1.7 to 2.1.17. After upgrade there was no trust in dovecot. Because webinterface worked before install and upgrade, i guess it was there before, but i am not sure. However, i added it. After these three changes openchange/samba4 is more stable, but it crashed at least one time again. Furthermore display of mails in Outlook-Sent folder isn't ok. Another Problem: Calendar-Entries which i created in Outlook are ok in webinterface, but Outlook says in day/week-view, that it cannot read the calendar. In list-view the entries are displayed correctly. I will configure my client to the english language, check my install and hopefully be able to provide better information afterwards. > Samba crashs the first time you connect outlook ? Yes. I created a new user. My first login was via mutt and Thunderbird. Regards Mario > -- > Alain Abbas > 11 rue Robert Schumann > 54500 Vandoeuvre > Tel : +333 83 18 02 70 > skype: alain.abbas -- users@sogo.nu https://inverse.ca/sogo/lists
[SOGo] webinterface doesn't provide ldap information
Hi
I have following installation:
- postfix
- dovecot
- samba4
- sogo
Samba4 contains the accounts and works as ldap Server. Login via webinterface
is possible. Problem is: it seems, that sogo doesn't know the users. When i
write an Email i cannot select the other users. Further, i cannot share a
calendar to another user. And the "Shared Addresses" are empty.
I created my config using the pdf documents on
http://www.sogo.nu/english/support/documentation.html
I attach one relevant/interesting part below.
Has anyone an idea? I am happy for any tip.
kindly regards
Mario
PS: my /etc/sogo/sogo.conf is similar to the example from documentation
...
SOGoUserSources '(
{
CNFieldName = displayName;
IDFieldName = cn;
UIDFieldName = sAMAccountName;
baseDN = "cn=Users,dc=example,dc=com";
bindDN = "cn=Administrator,cn=Users,dc=example,dc=com";
bindFields = (
sAMAccountName
);
bindPassword = "%1OpenChange";
canAuthenticate = YES;
displayName = "Shared Addresses";
hostname = "127.0.0.1";
id = samba;
isAddressBook = YES;
port = 389;
}
)'
...
--
users@sogo.nu
https://inverse.ca/sogo/lists
Re: [SOGo] nightly builds, Debian 32 Bit
On Tue, Sep 10, 2013 at 09:36:46AM -0400, Jean Raby wrote: > ... > I've restarted the nightly builds, so new ones should be available soon. Hi I noticed builds are up to date now (11. September). Unfortunately sogo_2.1.0...i386.deb is still missing. Can anyone look at this issue again? best regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
[SOGo] nightly builds, Debian 32 Bit
Hi Today i want to change from deb http://inverse.ca/debian wheezy wheezy to deb http://inverse.ca/debian-nightly wheezy wheezy Problem: sogo-openchange depends on sogo (= 2.0.7.20130829-1) [UNAVAILABLE] When i search in http://inverse.ca/debian-nightly/pool/wheezy/s/sogo/ i only find sogo_2.0.7.20130829-1_amd64.deb, but i need i386. Any tips? best regards Mario -- users@sogo.nu https://inverse.ca/sogo/lists
