Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-17 Thread Mark Adams
On Thu, Jun 16, 2011 at 06:03:51PM +0100, Julian Robbins wrote:
 On 15/06/11 13:27, André Schild wrote:
 Am 15.06.2011 13:58, schrieb Julian Robbins:
 On 15/06/11 12:00, Ludovic Marcotte wrote:
 On 15/06/11 04:54, Julian Robbins wrote:
 The Sogo server isn't under much of a load and has WOWorkers
 set to 5. We have approx 8 test users at the moment, so I
 don't think the server is at fault.
 Share your configuration. You must customize the SOGo
 Integrator so please show the customizations you've done,
 together with your Apache and SOGo configuration. If you also
 use updates.php, show that too.
 
 Regards,
 
 Hello Ludovic
 
 Although we use Integrator, as yet I have made no changes to it
 that are being pushed, so I am a little confused when you say
 '/You must customize the SOGo Integrator so please show the
 customizations you've done/', nor do I yet have an updates.php,
 (although I don't think this matters). Perhaps the lack of
 customisations to Integrator is where my problems lie  ?
 Could be,
 
 the integrator xpi you get from the download page is configured to
 work together with the sogo demo/test site.
 If you just use it unmodifyed, it might well try to access some
 wrong sites and does not find the correct informations...
 
 I've now setup the full updates.php system which is working fine.
 Although Thunderbird clients are picking up Addons fine, there
 doesn't appear to be much of an improvement in speed of
 Thunderbird/Lightning, Integrator, Connector, etc combination. That
 said one user that had issues with caching, and errors now has a
 fully working setup after pointing her pc to the sogo-plugins to
 pick up addons and be controlled config wise. Why I dont know, but
 one beneficial effect ;-)
 
 I'm not sure what else I can do, the slowness is livable with, but I
 just wanted to know approximately if this combination usually
 performed much more slowly than just Thunderbird on its own
 
 -- 
 

Lightning with thunderbird 3 is just poor. Thunderbird 2 with earlier
versions of lightning works much better..

 Kind Regards,
 
 Julian Robbins
 
 -- 
 users@sogo.nu
 https://inverse.ca/sogo/lists

-- 
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-16 Thread Julian Robbins

On 15/06/11 13:27, André Schild wrote:

Am 15.06.2011 13:58, schrieb Julian Robbins:

On 15/06/11 12:00, Ludovic Marcotte wrote:

On 15/06/11 04:54, Julian Robbins wrote:
The Sogo server isn't under much of a load and has WOWorkers set to 
5. We have approx 8 test users at the moment, so I don't think the 
server is at fault. 
Share your configuration. You must customize the SOGo Integrator so 
please show the customizations you've done, together with your 
Apache and SOGo configuration. If you also use updates.php, show 
that too.


Regards,


Hello Ludovic

Although we use Integrator, as yet I have made no changes to it that 
are being pushed, so I am a little confused when you say '/You must 
customize the SOGo Integrator so please show the customizations 
you've done/', nor do I yet have an updates.php, (although I don't 
think this matters). Perhaps the lack of customisations to Integrator 
is where my problems lie  ?

Could be,

the integrator xpi you get from the download page is configured to 
work together with the sogo demo/test site.
If you just use it unmodifyed, it might well try to access some wrong 
sites and does not find the correct informations...


I've now setup the full updates.php system which is working fine. 
Although Thunderbird clients are picking up Addons fine, there doesn't 
appear to be much of an improvement in speed of Thunderbird/Lightning, 
Integrator, Connector, etc combination. That said one user that had 
issues with caching, and errors now has a fully working setup after 
pointing her pc to the sogo-plugins to pick up addons and be controlled 
config wise. Why I dont know, but one beneficial effect ;-)


I'm not sure what else I can do, the slowness is livable with, but I 
just wanted to know approximately if this combination usually performed 
much more slowly than just Thunderbird on its own


--

Kind Regards,

Julian Robbins

--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread Ludovic Marcotte

On 15/06/11 04:54, Julian Robbins wrote:
The Sogo server isn't under much of a load and has WOWorkers set to 5. 
We have approx 8 test users at the moment, so I don't think the server 
is at fault. 
Share your configuration. You must customize the SOGo Integrator so 
please show the customizations you've done, together with your Apache 
and SOGo configuration. If you also use updates.php, show that too.


Regards,

--
Ludovic Marcotte
lmarco...@inverse.ca  ::  +1.514.755.3630  ::  www.inverse.ca
Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence 
(www.packetfence.org)

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread Julian Robbins

On 15/06/11 12:00, Ludovic Marcotte wrote:

On 15/06/11 04:54, Julian Robbins wrote:
The Sogo server isn't under much of a load and has WOWorkers set to 
5. We have approx 8 test users at the moment, so I don't think the 
server is at fault. 
Share your configuration. You must customize the SOGo Integrator so 
please show the customizations you've done, together with your Apache 
and SOGo configuration. If you also use updates.php, show that too.


Regards,


Hello Ludovic

Although we use Integrator, as yet I have made no changes to it that are 
being pushed, so I am a little confused when you say '/You must 
customize the SOGo Integrator so please show the customizations you've 
done/', nor do I yet have an updates.php, (although I don't think this 
matters). Perhaps the lack of customisations to Integrator is where my 
problems lie  ?



Here is the SOGo config:-


?xml version=1.0 encoding=UTF-8?
!DOCTYPE plist PUBLIC -//GNUstep//DTD plist 0.9//EN 
http://www.gnustep.org/plist-0_9.xml;

plist version=0.9
dict
keyNSGlobalDomain/key
dict
/dict
keysogod/key
dict
keyOCSEMailAlarmsFolderURL/key
stringmysql://root:**@127.0.0.1:3306/sogo/sogo_alarms_folder/string
keyOCSFolderInfoURL/key
stringmysql://root:**@127.0.0.1:3306/sogo/sogo_folder_info/string
keyOCSSessionsFolderURL/key
stringmysql://root:**@127.0.0.1:3306/sogo/sogo_sessions_folder/string
keySOGoAppointmentSendEMailNotifications/key
stringYES/string
keySOGoAppointmentSendEMailReceipts/key
stringNO/string
keySOGoCalendarDefaultRoles/key
array
stringPublicViewer/string
stringConfidentialDAndTViewer/string
/array
keySOGoContactsDefaultRoles/key
array
stringObjectViewer/string
stringObjectCreator/string
/array
keySOGoDraftsFolderName/key
stringINBOX/Drafts/string
keySOGoEnablePublicAccess/key
stringYES/string
keySOGoIMAPAclConformsToIMAPExt/key
stringYES/string
keySOGoIMAPServer/key
string.q-par.com/string
keySOGoLanguage/key
stringEnglish/string
keySOGoLoginModule/key
stringCalendar/string
keySOGoMailDomain/key
stringq-par.com/string
keySOGoMailingMechanism/key
stringsmtp/string
keySOGoProfileURL/key
stringmysql://root:***@127.0.0.1:3306/sogo/sogo_user_profile/string
keySOGoSMTPServer/key
string.q-par.com/string
keySOGoSentFolderName/key
stringINBOX/Sent/string
keySOGoSuperUsernames/key
array
stringjulianr/string
/array
keySOGoTimeZone/key
stringEurope/London/string
keySOGoTrashFolderName/key
stringINBOX/Trash/string
keySOGoUserSources/key
array
dict
keyKindFieldName/key
stringdescription/string
keyMultipleBookingsFieldName/key
stringmultiplebook/string
keycanAuthenticate/key
stringYES/string
keydisplayName/key
stringSOGo Users/string
keyid/key
stringusers/string
keyisAddressBook/key
stringYES/string
keytype/key
stringsql/string
keyuserPasswordAlgorithm/key
stringmd5/string
keyviewURL/key
stringmysql://root:**@127.0.0.1:3306/sogo/sogo_users/string
/dict
/array
keyWOWorkersCount/key
string3/string
/dict
/dict
/plist



_/etc/apache2/conf.d/SOGO.conf _

Alias /SOGo.woa/WebServerResources/ \
  /usr/lib/GNUstep/SOGo/WebServerResources/
Alias /SOGo/WebServerResources/ \
  /usr/lib/GNUstep/SOGo/WebServerResources/
AliasMatch /SOGo/so/ControlPanel/Products/(.*)/Resources/(.*) \
   /usr/lib/GNUstep/SOGo/$1.SOGo/Resources/$2

Directory /usr/lib/GNUstep/SOGo/
AllowOverride None
Order deny,allow
Allow from all
/Directory

LocationMatch 
^/SOGo/so/ControlPanel/Products/.*UI/Resources/.*\.(jpg|png|gif|css|js)

  SetHandler default-handler
/LocationMatch

## Uncomment the following to enable proxy-side authentication, you will 
then
## need to set the SOGoTrustProxyAuthentication SOGo user default to 
YES and

## adjust the x-webobjects-remote-user proxy header in the Proxy section
## below.
#Location /SOGo
#  AuthType XXX
#  Require valid-user
#  SetEnv proxy-nokeepalive 1
#  Allow from all
#/Location

ProxyRequests Off
SetEnv proxy-nokeepalive 1
ProxyPreserveHost On

# When using CAS, you should uncomment this and install 
cas-proxy-validate.py

# in /usr/lib/cgi-bin to reduce server overloading
#
# ProxyPass /SOGo/casProxy http://localhost/cgi-bin/cas-proxy-validate.py
# Proxy http://localhost/app/cas-proxy-validate.py
#   Order deny,allow
#   Allow from your-cas-host-addr
# /Proxy

ProxyPass /SOGo http://127.0.0.1:2/SOGo retry=0

Proxy http://127.0.0.1:2/SOGo
## adjust the following to your configuration
  RequestHeader set x-webobjects-server-port 80
  RequestHeader set x-webobjects-server-name sogo
  RequestHeader set x-webobjects-server-url http://sogo;

## When using proxy-side autentication, you need to uncomment and
## adjust the following line:
#  RequestHeader set x-webobjects-remote-user %{REMOTE_USER}e

  RequestHeader set x-webobjects-server-protocol HTTP/1.0
  RequestHeader set x-webobjects-remote-host %{REMOTE_HOST}e 
env=REMOTE_HOST


  AddDefaultCharset UTF-8

  Order allow,deny
  Allow from all
/Proxy

## We use mod_rewrite to pass remote address to the SOGo proxy.
# The remote 

Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread André Schild

Am 15.06.2011 13:58, schrieb Julian Robbins:

On 15/06/11 12:00, Ludovic Marcotte wrote:

On 15/06/11 04:54, Julian Robbins wrote:
The Sogo server isn't under much of a load and has WOWorkers set to 
5. We have approx 8 test users at the moment, so I don't think the 
server is at fault. 
Share your configuration. You must customize the SOGo Integrator so 
please show the customizations you've done, together with your Apache 
and SOGo configuration. If you also use updates.php, show that too.


Regards,


Hello Ludovic

Although we use Integrator, as yet I have made no changes to it that 
are being pushed, so I am a little confused when you say '/You must 
customize the SOGo Integrator so please show the customizations you've 
done/', nor do I yet have an updates.php, (although I don't think this 
matters). Perhaps the lack of customisations to Integrator is where my 
problems lie  ?

Could be,

the integrator xpi you get from the download page is configured to work 
together with the sogo demo/test site.
If you just use it unmodifyed, it might well try to access some wrong 
sites and does not find the correct informations...


André
--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread Julian Robbins


Share your configuration. You must customize the SOGo Integrator so 
please show the customizations you've done, together with your 
Apache and SOGo configuration. If you also use updates.php, show 
that too.


Regards,


Hello Ludovic

Although we use Integrator, as yet I have made no changes to it that 
are being pushed, so I am a little confused when you say '/You must 
customize the SOGo Integrator so please show the customizations 
you've done/', nor do I yet have an updates.php, (although I don't 
think this matters). Perhaps the lack of customisations to Integrator 
is where my problems lie  ?

Could be,

the integrator xpi you get from the download page is configured to 
work together with the sogo demo/test site.
If you just use it unmodifyed, it might well try to access some wrong 
sites and does not find the correct informations...


The xpi I use was already modified with the modified upgrade path ie the 
updateURL path was changed to reflect our set up here.


But are there any other places that have to be changed ? I note in the 
sogo-config.js file in chrome/content/sogo-config.js in the xpi file has 
a couple of urls such as


line 44

var extensions
= 
rdf.GetResource(http://inverse.ca/sogo-integrator/extensions;);

var updateURLres
= 
rdf.GetResource(http://inverse.ca/sogo-integrator/updateURL;);

var ds

which I wondered do these need changes to  my hostname for my own sogo 
server ? This isn't mentioned in the docs.


Julian
--
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread Alessio Fattorini

Il 15/06/2011 16:40, Julian Robbins ha scritto:


which I wondered do these need changes to my hostname for my own sogo
server ? This isn't mentioned in the docs.


Only what it's mentioned in the docs.
Put your configuration as Ludovic suggests


--
Alessio Fattorini (alessio.fattor...@nethesis.it)

nethesis srl - Via degli Olmi 16/4 - 61100 Pesaro (PU)
tel. +39 0721 405516 - fax +39 0721 268147
www.nethesis.it - i...@nethesis.it
--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread Julian Robbins

On 15/06/11 15:47, Alessio Fattorini wrote:

Il 15/06/2011 16:40, Julian Robbins ha scritto:


which I wondered do these need changes to my hostname for my own sogo
server ? This isn't mentioned in the docs.


Only what it's mentioned in the docs.
Put your configuration as Ludovic suggests


ok, here it is :-

?xml version=1.0?
!DOCTYPE RDF
RDF xmlns=http://www.w3.org/1999/02/22-rdf-syntax-ns#;
  xmlns:isi=http://inverse.ca/sogo-integrator/;
  xmlns:em=http://www.mozilla.org/2004/em-rdf#;
  xmlns:NC=http://home.netscape.com/NC-rdf#;
Seq about=http://inverse.ca/sogo-integrator/extensions;

isi:updateURL=http://sogo/plugins/updates.php?plugin=%ITEM_ID%amp;version=%ITEM_VERSION%amp;platform=%PLATFORM%;

li
Description
em:id=sogo-integra...@inverse.ca
em:name=SOGo Integrator/
/li
li
Description
em:id=sogo-connec...@inverse.ca
em:name=SOGo Connector/
/li
/Seq
/RDF

./defaults/preferences/site.js from Integrator

pref(calendar.alarms.showmissed, true);
pref(calendar.caldav.sched.enabled, true);
pref(calendar.timezone.local, /mozilla.org/20070129_1/Europe/London);
pref(sogo-integrator.autocomplete.server.urlid, public);


I haven't set up the updates.php file as yet, but i dont think that's 
the issue anyway (pls correct me if I'm wrong though)



--
Kind Regards,

Julian Robbins
Web Marketing and IT Manager

Q-par Angus Ltd
Barons Cross Laboratories
Leominster
Herefordshire
HR6 8RS
United Kingdom

Telephone +44 (0) 1568 612138
Fax   +44 (0) 1568 616373
Web www.q-par.com

IDEAS ENGINEERED - SPECIALISTS IN MICROWAVE and RF ENGINEERING

(Registered office) Incorporated in England No 1826221

--
users@sogo.nu
https://inverse.ca/sogo/lists


Re: [SOGo] Slowness of Thunderbird/Lightning/Integrator setup

2011-06-15 Thread Julian Robbins

On 15/06/11 15:40, Julian Robbins wrote:
But are there any other places that have to be changed ? I note in the 
sogo-config.js file in chrome/content/sogo-config.js in the xpi file 
has a couple of urls such as


line 44

var extensions
= 
rdf.GetResource(http://inverse.ca/sogo-integrator/extensions;);

var updateURLres
= 
rdf.GetResource(http://inverse.ca/sogo-integrator/updateURL;);

var ds

which I wondered do these need changes to  my hostname for my own sogo 
server ? This isn't mentioned in the docs.
I know its bad practise to reply to your own posts, but I wondered if we 
do have urls such as the ones above which are correct, which is what 
Alessio is saying, I wonder if a potential issue here is our web proxy 
server getting in the way of any requests to these urls above ?


--
Kind Regards,

Julian Robbins

--
users@sogo.nu
https://inverse.ca/sogo/lists