Re: Brain dead question on my part...
Thanks Jeff, That explains why it didn’t work… :-) On Jun 4, 2018, at 6:08 PM, Jeff Zhang mailto:zjf...@gmail.com>> wrote: As the error says spark 2.2.1 is not supported in 0.7.2, and property (zeppelin.spark.enableSupportedVersionCheck) is only available in 0.8.0 (https://issues.apache.org/jira/browse/ZEPPELIN-2324) so please try 0.8.0 RC4 https://dist.apache.org/repos/dist/dev/zeppelin/zeppelin-0.8.0-rc4/ There's still one issue of publishing paragraph in 0.8.0 RC4, I will start a new RC, but it should work fine if don't need to publish paragraph. Michael Segel mailto:msegel_had...@hotmail.com>>于2018年6月4日周一 下午11:05写道: Hi, I’m trying to use Zeppelin to connect to a MapR Cluster… Yes, I know that MapR has their own supported release but I also want to use the same set up to also run stand alone too… My issue is that I’m running Zeppelin 0.7.2 and when I try to connect to spark, I get the following error…. Spark 2.2.1-mapr-1803 is not supported Ok… so its been a while, I’m trying to see what would cause this and if there was an easy fix… (other than going w MapR’s release and running it in a container.) Thx -Mike
Re: Brain dead question on my part...
As the error says spark 2.2.1 is not supported in 0.7.2, and property ( zeppelin.spark.enableSupportedVersionCheck) is only available in 0.8.0 ( https://issues.apache.org/jira/browse/ZEPPELIN-2324) so please try 0.8.0 RC4 https://dist.apache.org/repos/dist/dev/zeppelin/zeppelin-0.8.0-rc4/ There's still one issue of publishing paragraph in 0.8.0 RC4, I will start a new RC, but it should work fine if don't need to publish paragraph. Michael Segel 于2018年6月4日周一 下午11:05写道: > Hi, > > I’m trying to use Zeppelin to connect to a MapR Cluster… > > Yes, I know that MapR has their own supported release but I also want to > use the same set up to also run stand alone too… > > My issue is that I’m running Zeppelin 0.7.2 and when I try to connect to > spark, I get the following error…. > > Spark 2.2.1-mapr-1803 is not supported > > Ok… so its been a while, I’m trying to see what would cause this and if > there was an easy fix… (other than going w MapR’s release and running it in > a container.) > > > Thx > > -Mike > >
Re: Brain dead question on my part...
Yes- restart Zeppelin and make sure no instances are running. On Mon, Jun 4, 2018 at 11:48 AM, Michael Segel wrote: > This is a simple test that I was using to see if I could run anything… > No errors or anything just the error message… > > > > > On Jun 4, 2018, at 11:41 AM, Ruslan Dautkhanov > wrote: > > Can you send a screenshot with the error and complete exception stack? > > > > > -- > Ruslan Dautkhanov > > On Mon, Jun 4, 2018 at 10:40 AM, Michael Segel > wrote: > >> Hmmm. Still not working. >> Added it to the interpreter setting and restarted the interpreter. >> >> The issue is that I need to use the MapR version of spark since I’m >> running this on the cluster. >> >> Should I restart Zeppelin itself? >> >> On Jun 4, 2018, at 11:32 AM, Ruslan Dautkhanov >> wrote: >> >> zeppelin.spark.enableSupportedVersionCheck >> >> >> > >
Re: Brain dead question on my part...
This is a simple test that I was using to see if I could run anything… No errors or anything just the error message… [cid:1A256034-A6E3-4386-806C-3A166EEBD376] On Jun 4, 2018, at 11:41 AM, Ruslan Dautkhanov mailto:dautkha...@gmail.com>> wrote: Can you send a screenshot with the error and complete exception stack? -- Ruslan Dautkhanov On Mon, Jun 4, 2018 at 10:40 AM, Michael Segel mailto:msegel_had...@hotmail.com>> wrote: Hmmm. Still not working. Added it to the interpreter setting and restarted the interpreter. The issue is that I need to use the MapR version of spark since I’m running this on the cluster. Should I restart Zeppelin itself? On Jun 4, 2018, at 11:32 AM, Ruslan Dautkhanov mailto:dautkha...@gmail.com>> wrote: zeppelin.spark.enableSupportedVersionCheck
Re: Brain dead question on my part...
Can you send a screenshot with the error and complete exception stack? -- Ruslan Dautkhanov On Mon, Jun 4, 2018 at 10:40 AM, Michael Segel wrote: > Hmmm. Still not working. > Added it to the interpreter setting and restarted the interpreter. > > The issue is that I need to use the MapR version of spark since I’m > running this on the cluster. > > Should I restart Zeppelin itself? > > On Jun 4, 2018, at 11:32 AM, Ruslan Dautkhanov > wrote: > > zeppelin.spark.enableSupportedVersionCheck > > >
Re: Brain dead question on my part...
Hmmm. Still not working. Added it to the interpreter setting and restarted the interpreter. The issue is that I need to use the MapR version of spark since I’m running this on the cluster. Should I restart Zeppelin itself? On Jun 4, 2018, at 11:32 AM, Ruslan Dautkhanov mailto:dautkha...@gmail.com>> wrote: zeppelin.spark.enableSupportedVersionCheck
Re: Brain dead question on my part...
Nope add that as a spark interpreter setting. 0.7.2 should work fine with Spark 2.2 afaik. You may want to go with Zeppelin 0.8 when you upgrade to Spark 2.3. -- Ruslan Dautkhanov On Mon, Jun 4, 2018 at 10:29 AM, Michael Segel wrote: > I’m assuming that I want to set this in ./conf/zeppelin-site.xml … > > Didn’t have any impact. Still getting the same error. > > > On Jun 4, 2018, at 11:17 AM, Michael Segel > wrote: > > Hmmm…. did not know that option existed. > Are there any downsides to doing this? > > Thx > > -Mike > > > On Jun 4, 2018, at 11:10 AM, Ruslan Dautkhanov > wrote: > > Should you try to set zeppelin.spark.enableSupportedVersionCheck to > false at spark interpreter level ? > > > > -- > Ruslan Dautkhanov > > On Mon, Jun 4, 2018 at 9:05 AM, Michael Segel > wrote: > >> Hi, >> >> I’m trying to use Zeppelin to connect to a MapR Cluster… >> >> Yes, I know that MapR has their own supported release but I also want to >> use the same set up to also run stand alone too… >> >> My issue is that I’m running Zeppelin 0.7.2 and when I try to connect to >> spark, I get the following error…. >> >> Spark 2.2.1-mapr-1803 is not supported >> >> Ok… so its been a while, I’m trying to see what would cause this and if >> there was an easy fix… (other than going w MapR’s release and running it in >> a container.) >> >> >> Thx >> >> -Mike >> >> > > >
Re: Brain dead question on my part...
I’m assuming that I want to set this in ./conf/zeppelin-site.xml … Didn’t have any impact. Still getting the same error. On Jun 4, 2018, at 11:17 AM, Michael Segel mailto:msegel_had...@hotmail.com>> wrote: Hmmm…. did not know that option existed. Are there any downsides to doing this? Thx -Mike On Jun 4, 2018, at 11:10 AM, Ruslan Dautkhanov mailto:dautkha...@gmail.com>> wrote: Should you try to set zeppelin.spark.enableSupportedVersionCheck to false at spark interpreter level ? -- Ruslan Dautkhanov On Mon, Jun 4, 2018 at 9:05 AM, Michael Segel mailto:msegel_had...@hotmail.com>> wrote: Hi, I’m trying to use Zeppelin to connect to a MapR Cluster… Yes, I know that MapR has their own supported release but I also want to use the same set up to also run stand alone too… My issue is that I’m running Zeppelin 0.7.2 and when I try to connect to spark, I get the following error…. Spark 2.2.1-mapr-1803 is not supported Ok… so its been a while, I’m trying to see what would cause this and if there was an easy fix… (other than going w MapR’s release and running it in a container.) Thx -Mike
Re: Brain dead question on my part...
Hmmm…. did not know that option existed. Are there any downsides to doing this? Thx -Mike On Jun 4, 2018, at 11:10 AM, Ruslan Dautkhanov mailto:dautkha...@gmail.com>> wrote: Should you try to set zeppelin.spark.enableSupportedVersionCheck to false at spark interpreter level ? -- Ruslan Dautkhanov On Mon, Jun 4, 2018 at 9:05 AM, Michael Segel mailto:msegel_had...@hotmail.com>> wrote: Hi, I’m trying to use Zeppelin to connect to a MapR Cluster… Yes, I know that MapR has their own supported release but I also want to use the same set up to also run stand alone too… My issue is that I’m running Zeppelin 0.7.2 and when I try to connect to spark, I get the following error…. Spark 2.2.1-mapr-1803 is not supported Ok… so its been a while, I’m trying to see what would cause this and if there was an easy fix… (other than going w MapR’s release and running it in a container.) Thx -Mike
Brain dead question on my part...
Hi, I’m trying to use Zeppelin to connect to a MapR Cluster… Yes, I know that MapR has their own supported release but I also want to use the same set up to also run stand alone too… My issue is that I’m running Zeppelin 0.7.2 and when I try to connect to spark, I get the following error…. Spark 2.2.1-mapr-1803 is not supported Ok… so its been a while, I’m trying to see what would cause this and if there was an easy fix… (other than going w MapR’s release and running it in a container.) Thx -Mike