Hi Victor,
the baseband filters are indeed real and thus symmetric in spectrum.
Best regards,
Marcus
On Fri, 2018-04-20 at 11:47 +0300, Victor Petrescu via USRP-users
wrote:
> Hi all.
>
> I have a b210 device on which i want to make a transceiver. I managed
> to replicate 15Mhz bandwidth, but now i want to configure the FIR
> filters, to eliminate 10 Mhz from the bandwidth from RX and transmit
> only 5 Mhz on TX.
>
> I tried to make a low pass filter, to configure the taps, using the
> scripts from filter_tool, but the thing is that the filter is applied
> to the right of the center frequency, but also to the left, it is
> just mirrored having the center frequency as reference.
>
> I want to know if is there any possibility to elimitate the filter
> from the left size of the center frequency, or this is a result due
> to the existence of two FIR filters, each one applied to I and Q
> paramters.
>
>
> ___
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com