Re: Windows 7 and DHCP

[Josh Thompson]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Adam,

Can you share what was wrong in your dhcpd.conf file to help others debug 
similar issues?  Even if it is a simple mistake, it can be useful.  The 
options of the dhcpd.conf file can be a little confusing; so, it's always 
useful to have a reminder of how it works.  We all make little mistakes that 
get overlooked while we dig in to other possibilities.  :)

Josh

On Wednesday, April 18, 2012 12:42:55 PM Hechler, Adam wrote:
> Hey everyone,
> 
> Well, it turned out to be an issue with the dhcp.conf file. It was tweaked
> and now our Win 7 guests grab a private address successfully. Sorry to
> waste the bandwidth.
> 
> Adam
> 
> > -Original Message-
> > From: Hechler, Adam [mailto:hec...@rpi.edu]
> > Sent: Tuesday, April 17, 2012 5:05 PM
> > To: vcl-user@incubator.apache.org
> > Subject: RE: Windows 7 and DHCP
> > 
> > Thanks for the reply Andy,
> > 
> > I had actually tried the ignoredefaultroutes=enabled once before and it
> > didn't work. I tried it again. Still didn't work.
> > 
> > I also disabled the IPv6 early in the experimentation but I did also
> > disable the Link-Layer Topology and I set the NIC for 100Mbps Full
> > Duplex.
> > I disabled the public interface. I tried to remove the route 0.0.0.0 but
> > it did not exist. Just for ha-ha's I removed all routes and then
> > disabled and re- enabled the private interface. And ... No good. I
> > still get an autoconfiguration address of 169.254.104.39
> > 
> > There are no switches or routers in between. In fact the DHCP server is
> > on the same server as VMWare Server.
> > 
> > Our guys are going to double check the DHCP config against the DHCP
> > server that is working. All things being equal, if the public interface
> > pulls an address without problem from the public DHCP server but the
> > private interface has troubles getting an IP address from the private
> > DHCP server than it might be the DHCP server?
> > 
> > 
> > Thanks,
> > Adam
> > 
> > > -Original Message-
> > > From: Andy Kurth [mailto:andy_ku...@ncsu.edu]
> > > Sent: Tuesday, April 17, 2012 11:54 AM
> > > To: vcl-user@incubator.apache.org
> > > Subject: Re: Windows 7 and DHCP
> > > 
> > > A few things to try...
> > > 
> > > Run the following command and then try to get a private DHCP
> > > address:
> > > netsh interface ip set interface ""
> > > ignoredefaultroutes=enabled
> > > 
> > > This causes Windows to never route any traffic on the private
> > > interface through the default gateway.  The VCL capture code
> > > actually
> > > sets this to prevent known/common routing problems with Windows
> > > 7/2008.
> > > 
> > > If this doesn't help, try disabling the public interface and delete
> > > all default routes by running "route delete 0.0.0.0".  Try to get a
> > > private DHCP address.
> > > 
> > > Could also try:
> > > -Disable IPv6
> > > -Set a static speed and duplex for the interface
> > > -Disable Link-Layer Topology Discovery* on the interface
> > > 
> > > Are there any switches or routers between the Windows 7 computer and
> > > the private DHCP server?  I have seen posts discussing similar DHCP
> > > issues which were caused by the proxy arp configuration on a router.
> > > 
> > > Hope this helps,
> > > Andy
> > > 
> > > On Tue, Apr 17, 2012 at 9:57 AM, Hechler, Adam  wrote:
> > > > Thanks Mike and Dmitri,
> > > > 
> > > > 
> > > > 
> > > > As to Mike reply.  I've disabled the firewall completely, no
> > > > help. I've also set a static IP (with the one the DHCP server
> > > > is offering) and I am able to ssh from the management node to
> > > > the vm.
> > > > 
> > > > 
> > > > 
> > > > As to Dmitri's reply. I've checked out that KB article and added
> > > > those entries to the registry. No help.  There is no Relay
> > > > Agent being used. The DHCP server is the same subnet as the
> > > > management node.
> > > > 
> > > > 
> > > > 
> > > > Does anyone else have any other suggestions? How many of us are
> > 
> > running
> > 
> > > > Windows 7 VMs with VMWare Server 2.x?
> > > > 
> > > > 
> > > > 
> > > >

RE: Windows 7 and DHCP

[Hechler, Adam]

Hey everyone,

Well, it turned out to be an issue with the dhcp.conf file. It was tweaked and 
now our Win 7 guests grab a private address successfully.
Sorry to waste the bandwidth. 

Adam


> -Original Message-
> From: Hechler, Adam [mailto:hec...@rpi.edu]
> Sent: Tuesday, April 17, 2012 5:05 PM
> To: vcl-user@incubator.apache.org
> Subject: RE: Windows 7 and DHCP
> 
> Thanks for the reply Andy,
> 
> I had actually tried the ignoredefaultroutes=enabled once before and it
> didn't work. I tried it again. Still didn't work.
> 
> I also disabled the IPv6 early in the experimentation but I did also disable 
> the
> Link-Layer Topology and I set the NIC for 100Mbps Full Duplex.
> I disabled the public interface. I tried to remove the route 0.0.0.0 but it 
> did
> not exist. Just for ha-ha's I removed all routes and then disabled and re-
> enabled the private interface. And ... No good. I still get an 
> autoconfiguration
> address of 169.254.104.39
> 
> There are no switches or routers in between. In fact the DHCP server is on
> the same server as VMWare Server.
> 
> Our guys are going to double check the DHCP config against the DHCP server
> that is working. All things being equal, if the public interface pulls an 
> address
> without problem from the public DHCP server but the private interface has
> troubles getting an IP address from the private DHCP server than it might be
> the DHCP server?
> 
> 
> Thanks,
> Adam
> 
> 
> > -Original Message-
> > From: Andy Kurth [mailto:andy_ku...@ncsu.edu]
> > Sent: Tuesday, April 17, 2012 11:54 AM
> > To: vcl-user@incubator.apache.org
> > Subject: Re: Windows 7 and DHCP
> >
> > A few things to try...
> >
> > Run the following command and then try to get a private DHCP address:
> > netsh interface ip set interface ""
> > ignoredefaultroutes=enabled
> >
> > This causes Windows to never route any traffic on the private
> > interface through the default gateway.  The VCL capture code actually
> > sets this to prevent known/common routing problems with Windows
> > 7/2008.
> >
> > If this doesn't help, try disabling the public interface and delete
> > all default routes by running "route delete 0.0.0.0".  Try to get a
> > private DHCP address.
> >
> > Could also try:
> > -Disable IPv6
> > -Set a static speed and duplex for the interface
> > -Disable Link-Layer Topology Discovery* on the interface
> >
> > Are there any switches or routers between the Windows 7 computer and
> > the private DHCP server?  I have seen posts discussing similar DHCP
> > issues which were caused by the proxy arp configuration on a router.
> >
> > Hope this helps,
> > Andy
> >
> > On Tue, Apr 17, 2012 at 9:57 AM, Hechler, Adam  wrote:
> > > Thanks Mike and Dmitri,
> > >
> > >
> > >
> > > As to Mike reply.  I've disabled the firewall completely, no help. I've 
> > > also
> > > set a static IP (with the one the DHCP server is offering) and I am able 
> > > to
> > > ssh from the management node to the vm.
> > >
> > >
> > >
> > > As to Dmitri's reply. I've checked out that KB article and added those
> > > entries to the registry. No help.  There is no Relay Agent being used. The
> > > DHCP server is the same subnet as the management node.
> > >
> > >
> > >
> > > Does anyone else have any other suggestions? How many of us are
> running
> > > Windows 7 VMs with VMWare Server 2.x?
> > >
> > >
> > >
> > > Thanks,
> > >
> > > Adam
> > >
> > >
> > >
> > >
> > >
> > > From: Dmitri Chebotarov [mailto:dcheb...@gmu.edu]
> > > Sent: Monday, April 16, 2012 12:45 PM
> > > To: vcl-user@incubator.apache.org
> > > Subject: Re: Windows 7 and DHCP
> > >
> > >
> > >
> > > Hi
> > >
> > >
> > >
> > > I have the same issue with DHCP, which seems to only affect Win 7 (32
> and
> > > 64). Linux and XP work OK.
> > >
> > >
> > >
> > > I've disabled dhcp broadcast flag
> > (http://support.microsoft.com/kb/928233)
> > > on both private and public interface on Win 7 image.
> > >
> > > Since then I get a lot less DHCP errors on Win 7 reservations, but still 
> > > get
> > > few once in a while.
> > >
> > >
> > >
> > 

Re: Windows 7 and DHCP

[Mike Haudenschild]

Is your "private" (VCL) DHCP server also running as a VM on the same ESXi
host?

You may want to check this:

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1557


--
*Mike Haudenschild*
Education Systems Manager
Longsight Group
(740) 599-5005 x809
m...@longsight.com
www.longsight.com



On Tue, Apr 17, 2012 at 17:05, Hechler, Adam  wrote:

> Thanks for the reply Andy,
>
> I had actually tried the ignoredefaultroutes=enabled once before and it
> didn't work. I tried it again. Still didn't work.
>
> I also disabled the IPv6 early in the experimentation but I did also
> disable the Link-Layer Topology and I set the NIC for 100Mbps Full Duplex.
> I disabled the public interface. I tried to remove the route 0.0.0.0 but
> it did not exist. Just for ha-ha's I removed all routes and then disabled
> and re-enabled the private interface. And ... No good. I still get an
> autoconfiguration address of 169.254.104.39
>
> There are no switches or routers in between. In fact the DHCP server is on
> the same server as VMWare Server.
>
> Our guys are going to double check the DHCP config against the DHCP server
> that is working. All things being equal, if the public interface pulls an
> address without problem from the public DHCP server but the private
> interface has troubles getting an IP address from the private DHCP server
> than it might be the DHCP server?
>
>
> Thanks,
> Adam
>
>
> > -Original Message-
> > From: Andy Kurth [mailto:andy_ku...@ncsu.edu]
> > Sent: Tuesday, April 17, 2012 11:54 AM
> > To: vcl-user@incubator.apache.org
> > Subject: Re: Windows 7 and DHCP
> >
> > A few things to try...
> >
> > Run the following command and then try to get a private DHCP address:
> > netsh interface ip set interface ""
> > ignoredefaultroutes=enabled
> >
> > This causes Windows to never route any traffic on the private
> > interface through the default gateway.  The VCL capture code actually
> > sets this to prevent known/common routing problems with Windows
> > 7/2008.
> >
> > If this doesn't help, try disabling the public interface and delete
> > all default routes by running "route delete 0.0.0.0".  Try to get a
> > private DHCP address.
> >
> > Could also try:
> > -Disable IPv6
> > -Set a static speed and duplex for the interface
> > -Disable Link-Layer Topology Discovery* on the interface
> >
> > Are there any switches or routers between the Windows 7 computer and
> > the private DHCP server?  I have seen posts discussing similar DHCP
> > issues which were caused by the proxy arp configuration on a router.
> >
> > Hope this helps,
> > Andy
> >
> > On Tue, Apr 17, 2012 at 9:57 AM, Hechler, Adam  wrote:
> > > Thanks Mike and Dmitri,
> > >
> > >
> > >
> > > As to Mike reply.  I've disabled the firewall completely, no help.
> I've also
> > > set a static IP (with the one the DHCP server is offering) and I am
> able to
> > > ssh from the management node to the vm.
> > >
> > >
> > >
> > > As to Dmitri's reply. I've checked out that KB article and added those
> > > entries to the registry. No help.  There is no Relay Agent being used.
> The
> > > DHCP server is the same subnet as the management node.
> > >
> > >
> > >
> > > Does anyone else have any other suggestions? How many of us are running
> > > Windows 7 VMs with VMWare Server 2.x?
> > >
> > >
> > >
> > > Thanks,
> > >
> > > Adam
> > >
> > >
> > >
> > >
> > >
> > > From: Dmitri Chebotarov [mailto:dcheb...@gmu.edu]
> > > Sent: Monday, April 16, 2012 12:45 PM
> > > To: vcl-user@incubator.apache.org
> > > Subject: Re: Windows 7 and DHCP
> > >
> > >
> > >
> > > Hi
> > >
> > >
> > >
> > > I have the same issue with DHCP, which seems to only affect Win 7 (32
> and
> > > 64). Linux and XP work OK.
> > >
> > >
> > >
> > > I've disabled dhcp broadcast flag
> > (http://support.microsoft.com/kb/928233)
> > > on both private and public interface on Win 7 image.
> > >
> > > Since then I get a lot less DHCP errors on Win 7 reservations, but
> still get
> > > few once in a while.
> > >
> > >
> > >
> > > Looking at my dhcpd logs files it seems like Win 7 doesn't n

RE: Windows 7 and DHCP

[Hechler, Adam]

Thanks for the reply Andy,

I had actually tried the ignoredefaultroutes=enabled once before and it didn't 
work. I tried it again. Still didn't work.

I also disabled the IPv6 early in the experimentation but I did also disable 
the Link-Layer Topology and I set the NIC for 100Mbps Full Duplex. 
I disabled the public interface. I tried to remove the route 0.0.0.0 but it did 
not exist. Just for ha-ha's I removed all routes and then disabled and 
re-enabled the private interface. And ... No good. I still get an 
autoconfiguration address of 169.254.104.39

There are no switches or routers in between. In fact the DHCP server is on the 
same server as VMWare Server. 

Our guys are going to double check the DHCP config against the DHCP server that 
is working. All things being equal, if the public interface pulls an address 
without problem from the public DHCP server but the private interface has 
troubles getting an IP address from the private DHCP server than it might be 
the DHCP server? 


Thanks,
Adam


> -Original Message-
> From: Andy Kurth [mailto:andy_ku...@ncsu.edu]
> Sent: Tuesday, April 17, 2012 11:54 AM
> To: vcl-user@incubator.apache.org
> Subject: Re: Windows 7 and DHCP
> 
> A few things to try...
> 
> Run the following command and then try to get a private DHCP address:
> netsh interface ip set interface ""
> ignoredefaultroutes=enabled
> 
> This causes Windows to never route any traffic on the private
> interface through the default gateway.  The VCL capture code actually
> sets this to prevent known/common routing problems with Windows
> 7/2008.
> 
> If this doesn't help, try disabling the public interface and delete
> all default routes by running "route delete 0.0.0.0".  Try to get a
> private DHCP address.
> 
> Could also try:
> -Disable IPv6
> -Set a static speed and duplex for the interface
> -Disable Link-Layer Topology Discovery* on the interface
> 
> Are there any switches or routers between the Windows 7 computer and
> the private DHCP server?  I have seen posts discussing similar DHCP
> issues which were caused by the proxy arp configuration on a router.
> 
> Hope this helps,
> Andy
> 
> On Tue, Apr 17, 2012 at 9:57 AM, Hechler, Adam  wrote:
> > Thanks Mike and Dmitri,
> >
> >
> >
> > As to Mike reply.  I've disabled the firewall completely, no help. I've also
> > set a static IP (with the one the DHCP server is offering) and I am able to
> > ssh from the management node to the vm.
> >
> >
> >
> > As to Dmitri's reply. I've checked out that KB article and added those
> > entries to the registry. No help.  There is no Relay Agent being used. The
> > DHCP server is the same subnet as the management node.
> >
> >
> >
> > Does anyone else have any other suggestions? How many of us are running
> > Windows 7 VMs with VMWare Server 2.x?
> >
> >
> >
> > Thanks,
> >
> > Adam
> >
> >
> >
> >
> >
> > From: Dmitri Chebotarov [mailto:dcheb...@gmu.edu]
> > Sent: Monday, April 16, 2012 12:45 PM
> > To: vcl-user@incubator.apache.org
> > Subject: Re: Windows 7 and DHCP
> >
> >
> >
> > Hi
> >
> >
> >
> > I have the same issue with DHCP, which seems to only affect Win 7 (32 and
> > 64). Linux and XP work OK.
> >
> >
> >
> > I've disabled dhcp broadcast flag
> (http://support.microsoft.com/kb/928233)
> > on both private and public interface on Win 7 image.
> >
> > Since then I get a lot less DHCP errors on Win 7 reservations, but still get
> > few once in a while.
> >
> >
> >
> > Looking at my dhcpd logs files it seems like Win 7 doesn't not accept
> > DHCPOFFER - I see multiple requests from Win 7, but it never gets IP
> > address. Even when I manually run ipconfig /release, /renew.
> >
> >
> >
> > Where is your DHCP server located?
> >
> > Is it on the same subnet/broadcast domain or you have DHCP Relay agent
> on
> > your subnet to communicate with DHCP server?
> >
> >
> >
> > Thanks.
> >
> >
> >
> >
> > --
> >
> > Dmitri Chebotarov
> >
> > Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
> >
> > 223 Aquia Building, Ffx, MSN: 1B5
> > Phone: (703) 993-6175
> >
> > Fax: (703) 993-3404
> >
> >
> >
> > On Monday, April 16, 2012 at 12:33 , Mike Haudenschild wrote:
> >
> > Hi Adam,
> >
> >
> >
> > Not to jump to the goofy, but could the Windows firewall be bl

Re: Windows 7 and DHCP

[Andy Kurth]

A few things to try...

Run the following command and then try to get a private DHCP address:
netsh interface ip set interface ""
ignoredefaultroutes=enabled

This causes Windows to never route any traffic on the private
interface through the default gateway.  The VCL capture code actually
sets this to prevent known/common routing problems with Windows
7/2008.

If this doesn't help, try disabling the public interface and delete
all default routes by running "route delete 0.0.0.0".  Try to get a
private DHCP address.

Could also try:
-Disable IPv6
-Set a static speed and duplex for the interface
-Disable Link-Layer Topology Discovery* on the interface

Are there any switches or routers between the Windows 7 computer and
the private DHCP server?  I have seen posts discussing similar DHCP
issues which were caused by the proxy arp configuration on a router.

Hope this helps,
Andy

On Tue, Apr 17, 2012 at 9:57 AM, Hechler, Adam  wrote:
> Thanks Mike and Dmitri,
>
>
>
> As to Mike reply…  I’ve disabled the firewall completely, no help. I’ve also
> set a static IP (with the one the DHCP server is offering) and I am able to
> ssh from the management node to the vm.
>
>
>
> As to Dmitri’s reply… I’ve checked out that KB article and added those
> entries to the registry. No help.  There is no Relay Agent being used. The
> DHCP server is the same subnet as the management node.
>
>
>
> Does anyone else have any other suggestions? How many of us are running
> Windows 7 VMs with VMWare Server 2.x?
>
>
>
> Thanks,
>
> Adam
>
>
>
>
>
> From: Dmitri Chebotarov [mailto:dcheb...@gmu.edu]
> Sent: Monday, April 16, 2012 12:45 PM
> To: vcl-user@incubator.apache.org
> Subject: Re: Windows 7 and DHCP
>
>
>
> Hi
>
>
>
> I have the same issue with DHCP, which seems to only affect Win 7 (32 and
> 64). Linux and XP work OK.
>
>
>
> I've disabled dhcp broadcast flag (http://support.microsoft.com/kb/928233)
> on both private and public interface on Win 7 image.
>
> Since then I get a lot less DHCP errors on Win 7 reservations, but still get
> few once in a while.
>
>
>
> Looking at my dhcpd logs files it seems like Win 7 doesn't not accept
> DHCPOFFER - I see multiple requests from Win 7, but it never gets IP
> address. Even when I manually run ipconfig /release, /renew.
>
>
>
> Where is your DHCP server located?
>
> Is it on the same subnet/broadcast domain or you have DHCP Relay agent on
> your subnet to communicate with DHCP server?
>
>
>
> Thanks.
>
>
>
>
> --
>
> Dmitri Chebotarov
>
> Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
>
> 223 Aquia Building, Ffx, MSN: 1B5
> Phone: (703) 993-6175
>
> Fax: (703) 993-3404
>
>
>
> On Monday, April 16, 2012 at 12:33 , Mike Haudenschild wrote:
>
> Hi Adam,
>
>
>
> Not to jump to the goofy, but could the Windows firewall be blocking it?
>
>
>
> Also, if you hand-assign an appropriate IP (disable DHCP on the adapter) can
> Windows communicate properly on the interface?
>
>
>
> Regards,
>
> Mike
>
>
> --
>
> Mike Haudenschild
>
> Education Systems Manager
>
> Longsight Group
>
> (740) 599-5005 x809
>
> m...@longsight.com
>
> www.longsight.com
>
>
>
> On Mon, Apr 16, 2012 at 11:52, Hechler, Adam  wrote:
>
> Hi,
>
>
>
> We’re having a similar issue that’s been noted on the list before but I
> can’t seem to find if it was ever resolved. Here’s a link to the archives
> where it was discussed.
> http://mail-archives.apache.org/mod_mbox/incubator-vcl-user/201104.mbox/%3C4DB59638.5000609%40ncsu.edu%3E
>
>
>
> Anyway,
>
>
>
> I have a Windows 7 base image (not captured yet). Both network interfaces
> are set to DHCP. The public interface successfully grabs an IP address but
> the private interface does not. All it does is assign on auto-configuration
> address (169.254.x.x).
>
>
>
> We’ve tried the recommendation in the email message I linked to. Here’s what
> I see in the messages log:
>
> (note: I’ve changed the actual IP address offered to x.x.x.x – a real IP was
> offered).
>
>
>
> Apr 16 11:39:45 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:39:45 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:39:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:39:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:39:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:39:56 vclser

RE: Windows 7 and DHCP

[Hechler, Adam]

Thanks Mike and Dmitri,

As to Mike reply…  I’ve disabled the firewall completely, no help. I’ve also 
set a static IP (with the one the DHCP server is offering) and I am able to ssh 
from the management node to the vm.

As to Dmitri’s reply… I’ve checked out that KB article and added those entries 
to the registry. No help.  There is no Relay Agent being used. The DHCP server 
is the same subnet as the management node.

Does anyone else have any other suggestions? How many of us are running Windows 
7 VMs with VMWare Server 2.x?

Thanks,
Adam


From: Dmitri Chebotarov [mailto:dcheb...@gmu.edu]
Sent: Monday, April 16, 2012 12:45 PM
To: vcl-user@incubator.apache.org
Subject: Re: Windows 7 and DHCP

Hi

I have the same issue with DHCP, which seems to only affect Win 7 (32 and 64). 
Linux and XP work OK.

I've disabled dhcp broadcast flag (http://support.microsoft.com/kb/928233) on 
both private and public interface on Win 7 image.
Since then I get a lot less DHCP errors on Win 7 reservations, but still get 
few once in a while.

Looking at my dhcpd logs files it seems like Win 7 doesn't not accept DHCPOFFER 
- I see multiple requests from Win 7, but it never gets IP address. Even when I 
manually run ipconfig /release, /renew.

Where is your DHCP server located?
Is it on the same subnet/broadcast domain or you have DHCP Relay agent on your 
subnet to communicate with DHCP server?

Thanks.


--
Dmitri Chebotarov
Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
223 Aquia Building, Ffx, MSN: 1B5
Phone: (703) 993-6175
Fax: (703) 993-3404


On Monday, April 16, 2012 at 12:33 , Mike Haudenschild wrote:
Hi Adam,

Not to jump to the goofy, but could the Windows firewall be blocking it?

Also, if you hand-assign an appropriate IP (disable DHCP on the adapter) can 
Windows communicate properly on the interface?

Regards,
Mike

--
Mike Haudenschild
Education Systems Manager
Longsight Group
(740) 599-5005 x809
m...@longsight.com<mailto:m...@longsight.com>
www.longsight.com<http://www.longsight.com>


On Mon, Apr 16, 2012 at 11:52, Hechler, Adam 
mailto:hec...@rpi.edu>> wrote:


Hi,



We’re having a similar issue that’s been noted on the list before but I can’t 
seem to find if it was ever resolved. Here’s a link to the archives where it 
was discussed. 
http://mail-archives.apache.org/mod_mbox/incubator-vcl-user/201104.mbox/%3C4DB59638.5000609%40ncsu.edu%3E



Anyway,



I have a Windows 7 base image (not captured yet). Both network interfaces are 
set to DHCP. The public interface successfully grabs an IP address but the 
private interface does not. All it does is assign on auto-configuration address 
(169.254.x.x).



We’ve tried the recommendation in the email message I linked to. Here’s what I 
see in the messages log:

(note: I’ve changed the actual IP address offered to x.x.x.x – a real IP was 
offered).



Apr 16 11:39:45 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:39:45 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:39:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:39:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:39:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:39:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:40:11 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:40:11 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:40:44 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:40:44 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:40:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:40:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:40:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:40:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Apr 16 11:41:12 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1

Apr 16 11:41:12 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1



Anything else I should be looking at?



Thanks,
Adam Hechler

  Senior Analyst /

PC Systems Administrator

  hec...@rpi.edu<mailto:hec...@rpi.edu>

(860) 548-2446

   Rensselaer at Hartford

Re: Windows 7 and DHCP

[Dmitri Chebotarov]

Hi  

I have the same issue with DHCP, which seems to only affect Win 7 (32 and 64). 
Linux and XP work OK.

I've disabled dhcp broadcast flag (http://support.microsoft.com/kb/928233) on 
both private and public interface on Win 7 image.
Since then I get a lot less DHCP errors on Win 7 reservations, but still get 
few once in a while.  

Looking at my dhcpd logs files it seems like Win 7 doesn't not accept DHCPOFFER 
- I see multiple requests from Win 7, but it never gets IP address. Even when I 
manually run ipconfig /release, /renew.

Where is your DHCP server located?  
Is it on the same subnet/broadcast domain or you have DHCP Relay agent on your 
subnet to communicate with DHCP server?

Thanks.  


--
Dmitri Chebotarov
Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
223 Aquia Building, Ffx, MSN: 1B5
Phone: (703) 993-6175
Fax: (703) 993-3404


On Monday, April 16, 2012 at 12:33 , Mike Haudenschild wrote:

> Hi Adam,
>  
> Not to jump to the goofy, but could the Windows firewall be blocking it?
>  
> Also, if you hand-assign an appropriate IP (disable DHCP on the adapter) can 
> Windows communicate properly on the interface?  
>  
> Regards,
> Mike
>  
> --
> Mike Haudenschild
> Education Systems Manager
> Longsight Group
> (740) 599-5005 x809
> m...@longsight.com (mailto:m...@longsight.com)
> www.longsight.com (http://www.longsight.com)
>  
>  
>  
> On Mon, Apr 16, 2012 at 11:52, Hechler, Adam  (mailto:hec...@rpi.edu)> wrote:
> >  
> > Hi,
> >  
> >  
> >   
> >  
> >  
> > We’re having a similar issue that’s been noted on the list before but I 
> > can’t seem to find if it was ever resolved. Here’s a link to the archives 
> > where it was discussed. 
> > http://mail-archives.apache.org/mod_mbox/incubator-vcl-user/201104.mbox/%3C4DB59638.5000609%40ncsu.edu%3E
> >  
> >  
> >   
> >  
> >  
> > Anyway,
> >  
> >  
> >   
> >  
> >  
> > I have a Windows 7 base image (not captured yet). Both network interfaces 
> > are set to DHCP. The public interface successfully grabs an IP address but 
> > the private interface does not. All it does is assign on auto-configuration 
> > address (169.254.x.x).  
> >  
> >  
> >   
> >  
> >  
> > We’ve tried the recommendation in the email message I linked to. Here’s 
> > what I see in the messages log:
> >  
> >  
> > (note: I’ve changed the actual IP address offered to x.x.x.x – a real IP 
> > was offered).
> >  
> >  
> >   
> >  
> >  
> > Apr 16 11:39:45 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:39:45 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:39:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:39:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:39:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:39:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:40:11 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:40:11 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:40:44 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:40:44 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:40:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:40:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:40:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:40:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> > Apr 16 11:41:12 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via 
> > vmnet1
> >  
> >  
> > Apr 16 11:41:12 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 
> > via vmnet1
> >  
> >  
> >   
> >  
> >  
> > Anything else I should be looking at?
> >  
> >  
> >   
> >  
> >  
> > Thanks,
> > Adam Hechler
> >  
> >  
> >   Senior Analyst /
> >  
> >  
> > PC Systems Administrator
> >  
> >  
> >   hec...@rpi.edu (mailto:hec...@rpi.edu)
> >  
> >  
> > (860) 548-2446 (tel:%28860%29%20548-2446)
> >  
> >  
> >Rensselaer at Hartford
> >  
> >  
> >   
> >  
> >  
> >   
> >  
> >  
> >   
> >  
> >  
> >  
> >  
>  
>  
>  

Re: Windows 7 and DHCP

[Mike Haudenschild]

Hi Adam,

Not to jump to the goofy, but could the Windows firewall be blocking it?

Also, if you hand-assign an appropriate IP (disable DHCP on the adapter)
can Windows communicate properly on the interface?

Regards,
Mike

--
*Mike Haudenschild*
Education Systems Manager
Longsight Group
(740) 599-5005 x809
m...@longsight.com
www.longsight.com



On Mon, Apr 16, 2012 at 11:52, Hechler, Adam  wrote:

>  Hi,
>
> ** **
>
> We’re having a similar issue that’s been noted on the list before but I
> can’t seem to find if it was ever resolved. Here’s a link to the archives
> where it was discussed.
> http://mail-archives.apache.org/mod_mbox/incubator-vcl-user/201104.mbox/%3C4DB59638.5000609%40ncsu.edu%3E
> 
>
> ** **
>
> Anyway,
>
> ** **
>
> I have a Windows 7 base image (not captured yet). Both network interfaces
> are set to DHCP. The public interface successfully grabs an IP address but
> the private interface does not. All it does is assign on auto-configuration
> address (169.254.x.x). 
>
> ** **
>
> We’ve tried the recommendation in the email message I linked to. Here’s
> what I see in the messages log:
>
> (note: I’ve changed the actual IP address offered to x.x.x.x – a real IP
> was offered).
>
> ** **
>
> Apr 16 11:39:45 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:39:45 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:39:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:39:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:39:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:39:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:40:11 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:40:11 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:40:44 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:40:44 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:40:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:40:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:40:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:40:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> Apr 16 11:41:12 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via
> vmnet1
>
> Apr 16 11:41:12 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11
> via vmnet1
>
> ** **
>
> Anything else I should be looking at?
>
> ** **
>
> Thanks,
> Adam Hechler
>
>   Senior Analyst /
>
> PC Systems Administrator
>
>   hec...@rpi.edu
>
> (860) 548-2446
>
>Rensselaer at Hartford
>
> ** **
>
> ** **
>
> ** **
>

Windows 7 and DHCP

[Hechler, Adam]

Hi,

We're having a similar issue that's been noted on the list before but I can't 
seem to find if it was ever resolved. Here's a link to the archives where it 
was discussed. 
http://mail-archives.apache.org/mod_mbox/incubator-vcl-user/201104.mbox/%3C4DB59638.5000609%40ncsu.edu%3E

Anyway,

I have a Windows 7 base image (not captured yet). Both network interfaces are 
set to DHCP. The public interface successfully grabs an IP address but the 
private interface does not. All it does is assign on auto-configuration address 
(169.254.x.x).

We've tried the recommendation in the email message I linked to. Here's what I 
see in the messages log:
(note: I've changed the actual IP address offered to x.x.x.x - a real IP was 
offered).

Apr 16 11:39:45 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:39:45 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:39:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:39:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:39:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:39:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:40:11 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:40:11 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:40:44 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:40:44 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:40:48 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:40:48 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:40:56 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:40:56 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1
Apr 16 11:41:12 vclserver dhcpd: DHCPDISCOVER from 00:50:56:1a:01:11 via vmnet1
Apr 16 11:41:12 vclserver dhcpd: DHCPOFFER on x.x.x.x to 00:50:56:1a:01:11 via 
vmnet1

Anything else I should be looking at?

Thanks,
Adam Hechler
  Senior Analyst /
PC Systems Administrator
  hec...@rpi.edu
(860) 548-2446
   Rensselaer at Hartford

Re: windows 7 and dhcp

[Andy Kurth]

DHCP is never receiving the DHCPACK from the VM.  It could be a default 
gateway/routing problem on the Windows 7 VM.  You don't need to perform 
the entire VCL reload to troubleshoot this.  Try this:


-Start `tail -f /var/log/messages` on the management node
-Log into the Windows 7 VM via the VMware console
-Open a command prompt
-Run `ipconfig /release` then `ipconfig /renew`, see what appears in the 
messages file

-Disable the public network interface
-Run `ipconfig /release` then `ipconfig /renew` again, did this change 
anything?


-Andy


On 4/20/2011 2:40 AM, Tyler Hardesty wrote:

Ok, so I do have some problem with windows 7... I've created two windows
XP machines and they work just fine but when trying windows 7, it never
acknowledges the IP, I just get the following in /var/log/messages...and
when I open the image up on vmware it seems just fine, looks like it's
using lsi logic and just sits at the login screen...:

Apr 20 00:29:43 vcl /usr/lib/vmware/bin/vmware-hostd[15093]: Accepted
password for user root from 127.0.0.1
Apr 20 00:30:15 vcl last message repeated 12 times
Apr 20 00:30:22 vcl last message repeated 3 times
Apr 20 00:30:22 vcl kernel: device eth0 entered promiscuous mode
Apr 20 00:30:22 vcl kernel: bridge-eth0: enabled promiscuous mode
Apr 20 00:30:24 vcl /usr/lib/vmware/bin/vmware-hostd[15093]: Accepted
password for user root from 127.0.0.1
Apr 20 00:30:29 vcl last message repeated 2 times
Apr 20 00:30:55 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:30:55 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:31:00 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:00 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:31:08 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:08 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:31:24 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:24 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:31:56 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:56 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:32:00 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:32:00 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:32:09 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:32:09 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1
Apr 20 00:32:26 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:32:26 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03
via vmnet1


On Tue, Apr 19, 2011 at 12:48 AM, Tyler Hardesty mailto:tharde...@gmail.com>> wrote:

Man, sorry to take up space but I actually found it here in the
month of April. I changed the logic type in vmware to lsi logic SAS
and it powered up just fine... so tomorrow I'll try and create a new
image and double check to make sure its set to lsi logic and not lsi
logic sas. If that still doesn't work I'll let you know.


On Tue, Apr 19, 2011 at 12:23 AM, Tyler Hardesty
mailto:tharde...@gmail.com>> wrote:

Oh, follow-up, I didn't even bother checking the machine on
vmware before. So I just did now and when windows 7 tries to
boot it goes into start up repair. When going through the
archive I think I remember seeing someone else with the problem
and I think it got resolved?! But I just can't find it now, if
anyone knows which month it's under (if it even exists) just let
me know and I'll be happy to try some more trouble shooting and
researching on my own.


On Tue, Apr 19, 2011 at 12:09 AM, Tyler Hardesty
mailto:tharde...@gmail.com>> wrote:

Is there anything different between windows xp and windows7
that would cause windows 7 not to respond to dhcp? I have my
windows XP image and everything works fine so I decided to
set up a Win7 machine to test it out... the image captures
fine but when trying to reserve it, it gives me the same not
responding to ssh message I had before. I checked the
/var/log/messages and it never shows a offer/request/ack
message for the IP like it does when I reserve the windows
XP image.

Re: windows 7 and dhcp

[Tyler Hardesty]

Ok, so I do have some problem with windows 7... I've created two windows XP
machines and they work just fine but when trying windows 7, it never
acknowledges the IP, I just get the following in /var/log/messages...and
when I open the image up on vmware it seems just fine, looks like it's using
lsi logic and just sits at the login screen...:

Apr 20 00:29:43 vcl /usr/lib/vmware/bin/vmware-hostd[15093]: Accepted
password for user root from 127.0.0.1
Apr 20 00:30:15 vcl last message repeated 12 times
Apr 20 00:30:22 vcl last message repeated 3 times
Apr 20 00:30:22 vcl kernel: device eth0 entered promiscuous mode
Apr 20 00:30:22 vcl kernel: bridge-eth0: enabled promiscuous mode
Apr 20 00:30:24 vcl /usr/lib/vmware/bin/vmware-hostd[15093]: Accepted
password for user root from 127.0.0.1
Apr 20 00:30:29 vcl last message repeated 2 times
Apr 20 00:30:55 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:30:55 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:31:00 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:00 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:31:08 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:08 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:31:24 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:24 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:31:56 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:31:56 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:32:00 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:32:00 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:32:09 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:32:09 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1
Apr 20 00:32:26 vcl dhcpd: DHCPDISCOVER from 00:50:56:1a:01:03 via vmnet1
Apr 20 00:32:26 vcl dhcpd: DHCPOFFER on 192.168.1.2 to 00:50:56:1a:01:03 via
vmnet1


On Tue, Apr 19, 2011 at 12:48 AM, Tyler Hardesty wrote:

> Man, sorry to take up space but I actually found it here in the month of
> April. I changed the logic type in vmware to lsi logic SAS and it powered up
> just fine... so tomorrow I'll try and create a new image and double check to
> make sure its set to lsi logic and not lsi logic sas. If that still doesn't
> work I'll let you know.
>
>
> On Tue, Apr 19, 2011 at 12:23 AM, Tyler Hardesty wrote:
>
>> Oh, follow-up, I didn't even bother checking the machine on vmware before.
>> So I just did now and when windows 7 tries to boot it goes into start up
>> repair. When going through the archive I think I remember seeing someone
>> else with the problem and I think it got resolved?! But I just can't find it
>> now, if anyone knows which month it's under (if it even exists) just let me
>> know and I'll be happy to try some more trouble shooting and researching on
>> my own.
>>
>>
>> On Tue, Apr 19, 2011 at 12:09 AM, Tyler Hardesty wrote:
>>
>>> Is there anything different between windows xp and windows7 that would
>>> cause windows 7 not to respond to dhcp? I have my windows XP image and
>>> everything works fine so I decided to set up a Win7 machine to test it
>>> out... the image captures fine but when trying to reserve it, it gives me
>>> the same not responding to ssh message I had before. I checked the
>>> /var/log/messages and it never shows a offer/request/ack message for the IP
>>> like it does when I reserve the windows XP image.
>>
>>
>>
>

Re: windows 7 and dhcp

[Tyler Hardesty]

Man, sorry to take up space but I actually found it here in the month of
April. I changed the logic type in vmware to lsi logic SAS and it powered up
just fine... so tomorrow I'll try and create a new image and double check to
make sure its set to lsi logic and not lsi logic sas. If that still doesn't
work I'll let you know.

On Tue, Apr 19, 2011 at 12:23 AM, Tyler Hardesty wrote:

> Oh, follow-up, I didn't even bother checking the machine on vmware before.
> So I just did now and when windows 7 tries to boot it goes into start up
> repair. When going through the archive I think I remember seeing someone
> else with the problem and I think it got resolved?! But I just can't find it
> now, if anyone knows which month it's under (if it even exists) just let me
> know and I'll be happy to try some more trouble shooting and researching on
> my own.
>
>
> On Tue, Apr 19, 2011 at 12:09 AM, Tyler Hardesty wrote:
>
>> Is there anything different between windows xp and windows7 that would
>> cause windows 7 not to respond to dhcp? I have my windows XP image and
>> everything works fine so I decided to set up a Win7 machine to test it
>> out... the image captures fine but when trying to reserve it, it gives me
>> the same not responding to ssh message I had before. I checked the
>> /var/log/messages and it never shows a offer/request/ack message for the IP
>> like it does when I reserve the windows XP image.
>
>
>

Re: windows 7 and dhcp

[Tyler Hardesty]

Oh, follow-up, I didn't even bother checking the machine on vmware before.
So I just did now and when windows 7 tries to boot it goes into start up
repair. When going through the archive I think I remember seeing someone
else with the problem and I think it got resolved?! But I just can't find it
now, if anyone knows which month it's under (if it even exists) just let me
know and I'll be happy to try some more trouble shooting and researching on
my own.

On Tue, Apr 19, 2011 at 12:09 AM, Tyler Hardesty wrote:

> Is there anything different between windows xp and windows7 that would
> cause windows 7 not to respond to dhcp? I have my windows XP image and
> everything works fine so I decided to set up a Win7 machine to test it
> out... the image captures fine but when trying to reserve it, it gives me
> the same not responding to ssh message I had before. I checked the
> /var/log/messages and it never shows a offer/request/ack message for the IP
> like it does when I reserve the windows XP image.

windows 7 and dhcp

[Tyler Hardesty]

Is there anything different between windows xp and windows7 that would cause
windows 7 not to respond to dhcp? I have my windows XP image and everything
works fine so I decided to set up a Win7 machine to test it out... the image
captures fine but when trying to reserve it, it gives me the same not
responding to ssh message I had before. I checked the /var/log/messages and
it never shows a offer/request/ack message for the IP like it does when I
reserve the windows XP image.