Re: [vdr] Jumping while replay causes video to halt
I figured this out. I had three dvb cards in the system and one of them is most likely somehow faulty. It caused this halt situation when jumping, it caused lirc to malfuncion (needed reboots couple of times a day) and on bootups half of the times DMI was not present. By removing the card all problems disappeared. So if odd misbehaviour is seen it is good to check dvb cards :) \\Kartsa Kartsa kirjoitti: Doesn't anyone have any suggestions where to start looking? \\Kartsa Kartsa kirjoitti: Hi all I am having some problems with jumping using yellow/blue and 1/3 buttons. Not always but almost the picture stops after jump. Its not on pause because pushing play does nothing. Using fast forward gets video playing again and then pushing play resumes playback. There is nothing in the logs that would tell me what the problem might be. Or at least I can't find anything. I have ubuntu and vdr installed from packages. vdr -V gives: vdr (1.6.0-2/1.6.0) - The Video Disk Recorder extrecmenu (1.1) - Extended recordings menu streamdev-server (0.3.4) - VDR Streaming Server skinsoppalusikka (1.6.4) - Soppalusikka skin conflictcheckonly (0.0.1) - Direct access to epgsearch's conflict check menu epgsearch (0.9.24) - search the EPG for repeats and more iptv (0.2.5) - Experience the IPTV menuorg (0.4.4) - Reorganizes the main menu burn (0.1.0-pre22) - Versatile convert-and-burn plugin pvrinput (2008-10-04) - use Hauppauge PVR as input device vompserver (0.3.0) - VDR on MVP plugin by Chris Tallon quickepgsearch (0.0.1) - Quick search for broadcasts undelete (0.0.6) - undelete for recordings xineliboutput (1.0.4) - X11/xine-lib output plugin epgsearchonly (0.0.1) - Direct access to epgsearch's search menu ttxtsubs (0.0.9) - Teletext subtitles weatherng (0.0.7-pre2) - Weather.com: Weather forecast osdteletext (0.8.1) - Displays teletext on the OSD I use vdr-sxfe for playback as a remote client on the same host. I tried regenerating index file with genindex with no change. How do I fix this? \\Kartsa ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] One recording per device only
Hello. I have a vdr host with 1 DVB-s FF card and 3 DVB-s USB devices and 3 DVB-t USB devices. When I have 2 concurrent DVB-s recordings at different transponders, these are done at different DVB-s USB devices and there is no problem, but if I have 2 concurrent recordings at the same transponder, I get lots of: Sep 24 16:27:39 vdr vdr: [20650] 2 cRepacker messages suppressed Sep 24 16:27:39 vdr vdr: [20650] cAudioRepacker(0xC1): skipped 572 bytes while syncing on next audio frame Sep 24 16:27:39 vdr vdr: [20650] 3 cRepacker messages suppressed Sep 24 16:27:39 vdr vdr: [20650] cAudioRepacker(0xC0): skipped 1148 bytes while syncing on next audio frame and scrambled data. As a first workaround / test setup I would like to limit vdr to do at most one recording per device and chose a new device even if a second recording is at the same transponder. Most suitably this shall apply one to specific devices or channels, if possible. How could this be achieved? Thank you. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr