Re: [vdr] Why won't my new TT-1401 DVB-S work [RESOLVED]
Can anyone help me on my problem? I've found I can get a picture with "mplayer /dev/dvb/adapter0/dvr0" when I szap, BUT only if I add the "-r" switch szap -r -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV" 1) If I miss out the "-r" switch I can't get a picture from dvr0. 2) If I add the "-r" switch, mplayer detects the TS format and plays the live TV perfectly. 3) If I miss out the "-l 11300" I can't get the front end to lock I still can't get the front end to lock in VDR either - so no recording and no live TV. I've tried all sorts of LNB config in setup.conf - latest being: Use DiSEqC:no SLOF (MHz):11700 Low LNB frequency (MHz): 9750 High LNB frequency (MHz): 10600 But I can't get it to work. Any ideas? Had to use a diseqc.conf entry, even though I'm not actually using diseqc! S160E 9 H 11300 t V All good now ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Why won't my new TT-1401 DVB-S work :(
Can anyone help me on my problem? I've found I can get a picture with "mplayer /dev/dvb/adapter0/dvr0" when I szap, BUT only if I add the "-r" switch szap -r -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV" 1) If I miss out the "-r" switch I can't get a picture from dvr0. 2) If I add the "-r" switch, mplayer detects the TS format and plays the live TV perfectly. 3) If I miss out the "-l 11300" I can't get the front end to lock I still can't get the front end to lock in VDR either - so no recording and no live TV. I've tried all sorts of LNB config in setup.conf - latest being: Use DiSEqC:no SLOF (MHz):11700 Low LNB frequency (MHz): 9750 High LNB frequency (MHz): 10600 But I can't get it to work. Any ideas? But I'm still getting: Oct 8 07:34:21 callin vdr: [1677] saved setup to /etc/vdr/vdr-1.7.15/setup.conf Oct 8 07:34:27 callin vdr: [1677] switching to channel 1 Oct 8 07:34:30 callin vdr: [1681] frontend 0/0 timed out while tuning to channel 1, tp 112483 Oct 8 07:35:35 callin vdr: [1681] frontend 0/0 timed out while tuning to channel 1, tp 112483 And I can still szap: ./szap -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV" reading channels from file '/etc/vdr/vdr-1.7.15/channels.conf' zapping to 1 'Maori TV': sat 0, frequency = 12483 MHz H, symbolrate 2250, vpid = 0x0202, apid = 0x028c sid = 0x using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal c94f | snr 95c4 | ber ff17 | unc fffe | status 1f | signal ca5e | snr 9537 | ber 0600 | unc fffe | FE_HAS_LOCK status 1f | signal ca76 | snr 95d6 | ber 0700 | unc fffe | FE_HAS_LOCK status 1f | signal c940 | snr 95a9 | ber 0600 | unc fffe | FE_HAS_LOCK status 1f | signal ca7e | snr 9558 | ber 0600 | unc fffe | FE_HAS_LOCK ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Alternative-Channel patch
On 11.10.2010 21:35, Rainer Blickle wrote: > ... > I havn't add any translations yet. If the patch gets merged into the > development branch, i will provide the translations at least for > german and english. Don't hold your breath on that ;-) This patch adds way too much complexity and changes too many interfaces. Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Supported FF cards
On 11.10.2010 21:37, Rainer Blickle wrote: >> there are enough other solution as "decoder" without tuner > What do you mean with "other" solutions ? I have a pvr350 cards for > output. Do you mean xineliboutput or streamdev or other real hardware > ? xine/xineliboutput with vdpau (h.264/hdtv) softdevice ... hardware: dxr3 em8400 eHD (h.264/hdtv) Broadcom Crystal BCM70012 (h.264/hdtv, maybe not far enough developed) ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Supported FF cards
> there are enough other solution as "decoder" without tuner What do you mean with "other" solutions ? I have a pvr350 cards for output. Do you mean xineliboutput or streamdev or other real hardware ? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Replay Problems with Extension HD
eHD card has now days working plugin for vdr, more info about that here: http://www.vdr-portal.de/board/thread.php?threadid=98019 eHD is stable with latest card firmwares, also for ts playback. Only issue is still that somehow VDR is not compatible with eHD on replay mode. With live tv DVB subtile timing is correct. During replay subtitles still comes 6-7s too early here in Finland. Last real discussion about this bug is from Sat Sep 5 15:09:30 CEST 2009. And still no any real solutions. -- Vesa ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Supported FF cards
On 11.10.2010 13:41, Rainer Blickle wrote: > Hi, > > i have found the following code snippet in dvbsdffdevice.c: > > 0x110A, // Fujitsu Siemens DVB-C > 0x13C2, // Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu > Siemens DVB-C > 0x13C20001, // Technotrend/Hauppauge WinTV DVB-T rev1.X > 0x13C20002, // Technotrend/Hauppauge WinTV DVB-C rev2.X > 0x13C20003, // Technotrend/Hauppauge WinTV Nexus-S rev2.X > 0x13C20004, // Galaxis DVB-S rev1.3 > 0x13C20006, // Fujitsu Siemens DVB-S rev1.6 > 0x13C20008, // Technotrend/Hauppauge DVB-T > 0x13C2000A, // Technotrend/Hauppauge WinTV Nexus-CA rev1.X > 0x13C2000E, // Technotrend/Hauppauge WinTV Nexus-S rev2.3 > 0x13C21002, // Technotrend/Hauppauge WinTV DVB-S rev1.3 SE > > Are these all supported ff cards ? Or ar these all available ff cards at all ? yes, they are all the same design with differenr layout ("only" mpeg2 hardwaredecoder, sdtv) and are not in production any more, http://www.vdr-wiki.de/wiki/index.php/Full-featured-DVB-Karte there is no ff hdtv card (yet) a vapor ware awardy wothy product may come out a least ... http://www.tt-pc.de/2673/HOME.html there are enough other solution as "decoder" without tuner ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] vdr-actuator-1.2.0 plugin
On Sat, Oct 9, 2010 at 4:58 PM, Luca Olivetti wrote: > Hello, > > I'm releasing version 1.2.0 of the "actuator" plugin available at > > http://www.ventoso.org/luca/vdr/ > > This plugin controls a linear actuator (or an horizon to horizon one) > through the parallel port with a simple circuit. > > From this version it is also possible to use the plugin without an actuator, > i.e. as a channel scanner only. > > Note that it only compiles with the current development version of vdr. > > The changes: > > - Version for current development version of vdr (>= 1.7.15) > - DVB-S2 support (untested, I don't have DVB-S2 hardware) > - Experimental seractuator module (uses a serial port instead > of a parallel port) > - Complete rewrite of the channel scanner > - The plugin can now work without an actuator (i.e. as a channel scanner > only) with the command line option "-s" or "--scanonly" > > Bye > -- > Luca > > Good work - I think it would be great if we could merge in the old rotor plugin into one overarching "VDR Dish" plugin which will work with both the 24V actuators as well as the diseqc motors, to include DVB-S / DVB-S2 channel scanners (entire satellite and single transponders), signal strength / quality meters, dish tuning / adjustment controls and with the ability to add selected channels to the overall channel list etc. This really is sorely missing from VDR. Its a nice project which I might look at if I ever get a spare moment! First I would have to update my VDR from 1.7.0 with multiproto as lack of good support for vdr-rotor has been holding me back from upgrading to S2API and later development versions of VDR. Thanks, Morfsta ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Supported FF cards
Hi, i have found the following code snippet in dvbsdffdevice.c: 0x110A, // Fujitsu Siemens DVB-C 0x13C2, // Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C 0x13C20001, // Technotrend/Hauppauge WinTV DVB-T rev1.X 0x13C20002, // Technotrend/Hauppauge WinTV DVB-C rev2.X 0x13C20003, // Technotrend/Hauppauge WinTV Nexus-S rev2.X 0x13C20004, // Galaxis DVB-S rev1.3 0x13C20006, // Fujitsu Siemens DVB-S rev1.6 0x13C20008, // Technotrend/Hauppauge DVB-T 0x13C2000A, // Technotrend/Hauppauge WinTV Nexus-CA rev1.X 0x13C2000E, // Technotrend/Hauppauge WinTV Nexus-S rev2.3 0x13C21002, // Technotrend/Hauppauge WinTV DVB-S rev1.3 SE Are these all supported ff cards ? Or ar these all available ff cards at all ? Regards, Rainer ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr