[Veritas-bu] NBU upgrade from 6.5.3 to 6.5.5.
We are in the middle of upgrading our NBU backup environment from version 6.5.3 to 6.5.5. The master and media server upgrades were fine. We are having issues with more than a handful of Windows clients. The clients used to finish without issue, they are now all ending in error code 1 with the following: 2/24/2010 6:37:52 PM - begin writing 2/24/2010 6:44:16 PM - Warning bpbrm(pid=2064) from client xxx-: WRN - can't open object: Shadow Copy Components:\System Service\Windows Management Instrumentation\WMI (BEDS 0xE0009421: No component files present on the snapshot.) 2/24/2010 6:44:18 PM - Warning bpbrm(pid=2064) from client xxx-: WRN - can't open object: Shadow Copy Components:\System Service\Event Logs\Event Logs (BEDS 0xE0009421: No component files present on the snapshot.) 2/24/2010 7:33:57 PM - end writing; write time: 00:56:05 the requested operation was partially successful(1) They are all failing with the exact same missing Shadow Copy Components files. Searching the Syamntec forums didn't turn up anything, hoping someone else has seen it. Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] vault duplication issue
Has anyone seen an issue with a vault profile where for every image to be duplicated a new tape is loaded? We have multiple vault policies set up and they write all images in each batch to the same tape until the tape is full, then it loads a new tape. We created a new profile the same way as the others. This new profile appears to be changing tapes for each image in each batch job. Has anyone seen this before? It is a media server duping images off of a data domain appliance writing to an IBM 3494 library/3592 tape drive. Thank you for any assistance. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] vault duplication issue
Yes, all the full polices are set to the same retention. From: ken_zuf...@goodyear.com [mailto:ken_zuf...@goodyear.com] Sent: Tuesday, December 01, 2009 11:51 AM To: Michitsch, John Subject: Re: [Veritas-bu] vault duplication issue Are all the retentions for the policies the same? The only time I've seen multiple tape mounts myself is when the retentions on backups are different Ken Zufall Technical Analyst D660C The Goodyear Tire Rubber Company GTN 446.0592 or 330.796.0592 Michitsch, John jmich...@gannett.com Sent by: veritas-bu-boun...@mailman.eng.auburn.edu 12/01/2009 11:42 AM To VERITAS-BU@MAILMAN.ENG.AUBURN.EDU VERITAS-BU@MAILMAN.ENG.AUBURN.EDU cc Subject [Veritas-bu] vault duplication issue Has anyone seen an issue with a vault profile where for every image to be duplicated a new tape is loaded? We have multiple vault policies set up and they write all images in each batch to the same tape until the tape is full, then it loads a new tape. We created a new profile the same way as the others. This new profile appears to be changing tapes for each image in each batch job. Has anyone seen this before? It is a media server duping images off of a data domain appliance writing to an IBM 3494 library/3592 tape drive. Thank you for any assistance. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] NetBackup 6.5 Release Update 3 Hotfix 1 (6.5.3.1)
We upgraded out master and two media servers to 6.5.3.1 (in order to backup a standby Exchange CCR node and Windows 2008) this week and our full backups this weekend are running incredibly slow, about 1/3 the normal speed. The client agents have not been upgraded, they are at v. 6.5.1. Do you think upgrading the agent will fix the speed issue, or am I going to need to open a support case? Thoughts? Thanks. From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Ed Wilts Sent: 20 February, 2009 10:08 AM To: Preston, Doug Cc: VERITAS-BU@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] NetBackup 6.5 Release Update 3 Hotfix 1 (6.5.3.1) On Fri, Feb 20, 2009 at 8:06 AM, Preston, Doug dpres...@landam.commailto:dpres...@landam.com wrote: There are a lot of your customers that would rather have a 32bit install instead of having to install all new machines twice. 3 times. 6.5 base, 6.5.3 patch kit, then 6.5.3.1 security patch. Without LiveUpdate, I can't see any way to shrink this to less than 3 separate installs. .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE ewi...@ewilts.orgmailto:ewi...@ewilts.org ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] NetBackup 6.5 Release Update 3 Hotfix 1 (6.5.3.1)
Correct, but we are not doing the Exchange or 2008 piece yet, just OS level backups. From: judy_hinchcli...@administaff.com [mailto:judy_hinchcli...@administaff.com] Sent: 21 February, 2009 10:49 AM To: Michitsch, John; VERITAS-BU@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] NetBackup 6.5 Release Update 3 Hotfix 1 (6.5.3.1) I thought you need 6.5.3 to do exchange 2008 backups That means the client needs to be at least at 6.5.3. From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Michitsch, John Sent: Saturday, February 21, 2009 9:04 AM To: VERITAS-BU@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] NetBackup 6.5 Release Update 3 Hotfix 1 (6.5.3.1) We upgraded out master and two media servers to 6.5.3.1 (in order to backup a standby Exchange CCR node and Windows 2008) this week and our full backups this weekend are running incredibly slow, about 1/3 the normal speed. The client agents have not been upgraded, they are at v. 6.5.1. Do you think upgrading the agent will fix the speed issue, or am I going to need to open a support case? Thoughts? Thanks. From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Ed Wilts Sent: 20 February, 2009 10:08 AM To: Preston, Doug Cc: VERITAS-BU@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] NetBackup 6.5 Release Update 3 Hotfix 1 (6.5.3.1) On Fri, Feb 20, 2009 at 8:06 AM, Preston, Doug dpres...@landam.commailto:dpres...@landam.com wrote: There are a lot of your customers that would rather have a 32bit install instead of having to install all new machines twice. 3 times. 6.5 base, 6.5.3 patch kit, then 6.5.3.1 security patch. Without LiveUpdate, I can't see any way to shrink this to less than 3 separate installs. .../Ed Ed Wilts, RHCE, BCFP, BCSD, SCSP, SCSE ewi...@ewilts.orgmailto:ewi...@ewilts.org ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup Live Update.
Is anyone using this to upgrade client agents. All things I've seen/read are negative about the product. We wasted many hours trying to get it to work on version 6.5 when it first came out. 6.5.3 is supposed to fix some issues, I don't want to go down the LU road again without the possibility of success! Anyone have it up and running successfully? Thanks, Johnny _ The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you. _ ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] 96 errors.
Is there a way to configure Netbackup to request media if a media server runs out of scratch media during a duplication process instead of the default of killing all dupe jobs and ending in a 96 status? Backup Exec does this nicely, it pauses the jobs and sends alerts asking for more media, when scratch media is added, the jobs continue. I hope nbu can do this as well... Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] multistream a user-defined backup.
I am trying to back up some Exchange datastores using a user-defined backup (we do not want the logs truncated, our storage system takes care of that). I would like to backup all of the stores at once, but I can't get to work. Backing up using a full schedule with mulitstreaming backs up each store in its own stream, but user-defined does not. Can anyone assist me with this? The bpbackup command I am using on the client looks like this: bpbackup -p policy_name -t 16 Microsoft Information Store:\*SG* Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] multistream a user-defined backup.
Yes, but the problem with the full backup is it truncates the logs, and we do not want that to happen. SO form what you're saying, there is no way to accomplish this? The reason for not doing multiple bpbackup commands is I want to manually add a bpbackup stream when a new database is created, that is why I'd like to do with the wildcards... -Original Message- From: Donaldson, Mark [mailto:[EMAIL PROTECTED] Sent: 07 November, 2008 12:54 PM To: Michitsch, John; VERITAS-BU@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] multistream a user-defined backup. You're right - user-defined backups won't break into multiple streams. You can do multiple bpbackup commands. If you do them in rapid succession, NetBackup will usually multiplex them correctly onto a tape. Something like: for dir in Microsoft Information Store:\*SG* do bpbackup -p policy_name -s ubak_schedname -t 16 $dir done Of, if there's sufficient permissions, you can build a policy then call the scheduler to perform the backup. The scheduler can do the multi-stream inherently. Policy has INCLUDE: Microsoft Information Store:\*SG* Allow Multiple Streams: Checked Build it with a full policy but no schedule defined. Then call the scheduler: bpbackup -i -p policy -s sched -h host -M -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michitsch, John Sent: Friday, November 07, 2008 10:16 AM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] multistream a user-defined backup. I am trying to back up some Exchange datastores using a user-defined backup (we do not want the logs truncated, our storage system takes care of that). I would like to backup all of the stores at once, but I can't get to work. Backing up using a full schedule with mulitstreaming backs up each store in its own stream, but user-defined does not. Can anyone assist me with this? The bpbackup command I am using on the client looks like this: bpbackup -p policy_name -t 16 Microsoft Information Store:\*SG* Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Exchange 2007 with CCR - Passive Node Backup
Has anyone seen these errors when trying an Exchange 2007 with CCR - Passive Node Backup? The client is the Exchange cluster virtual name. 9/26/2008 10:40:11 AM - begin Create Snapshot 9/26/2008 10:40:29 AM - Critical bpbrm(pid=404) from client ent-mocexcmb10: FTL - snapshot preparation failed - Error attempting to find volumes to snap., status 130 9/26/2008 10:40:29 AM - Critical bpbrm(pid=404) from client ent-mocexcmb10: FTL - snapshot preparation failed, status 130 9/26/2008 10:40:37 AM - end Create Snapshot; elapsed time: 00:00:26 9/26/2008 10:40:39 AM - end writing -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of oersted Sent: 24 September, 2008 5:42 PM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] Exchange 2007 with CCR - Passive Node Backup this is spot on Rosenkoetter, Gabriel wrote: You shouldn't be specifying either the active or passive node name as a client, you should be specifying the cluster's virtual name as a client. Also, note that you must run the NetBackup Client Service as an AD-level (not local) account that has local admin access on each server and admin access to the Exchange cluster for LCR/CCR snapshot backups. Running the client as LocalSystem will not work. (The documentation's a bit hazy on this point. It's clear that that's necessary for individual mailbox backups, it's not so clear that it's required for the cluster backups, but it makes sense when you think about it: the Exchange cluster isn't logically attached to either node, so neither node's LocalSystem has sufficient permissions.) -- gabriel rosenkoetter Radian Group Inc, Unix/Linux/VMware Sysadmin / Backup Recovery gabriel.rosenkoetter at radian.biz, 215 231 1556 From: Scheef Jr, Ed E. [mailto:CXScheef at tecoenergy.com] Sent: Tuesday, September 23, 2008 3:36 PM To: veritas-bu at mailman.eng.auburn.edu Subject: [Veritas-bu] Exchange 2007 with CCR - Passive Node Backup Folks, We're running Netbackup 6.5.2. We're just now setting up a Netbackup Policy for Exchange 2007 running in a CCR cluster. The backup has been defined to backup the passive node first, but if not available, backup the active node. The question I have is client definition in the Snapshot policy (within Exchange Policy) required to backup the Exchange database: When we put both physical CCR cluster node names in the policy's client list, it starts backups for both nodes, and looks like it does snapshots for both nodes, when only the passive node should be snapshotting, and getting backed up. Why is that happening ?? Anybody have a passive node Exchange backup set up and working ??? An obvious solution would be to take the active node server out of the policy's client list, but then if a failover occurred , and the passive node switched to what is now the active node, would the passive node backup still work without that physical server in the policy's client list ?? The Netbackup documentation update for 6.5.2 is not too clear on this !! Thanks Much, Ed Scheef Tampa Electric Company +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Recover Data from a Netbackup 5.1 image.
Does anyone know of a way to get data out of an image file created by Netbackup 5.1? We were copying the disk images and sending them offsite. After they are expired from the catalog, there is no way to import the image. We also do not have a copy of the catalog from the same time as the image file. Has anyone successfully restored from a Netacbkup 5.1 image file that was expired from the catalog and didn't have an old copy of the catalog? We already called Symantec and they sent us the doc stating there is no way to do it. I was just wondering if anyone here has made this happen. Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Recover Data from a Netbackup 5.1 image.
Yes, I understand it is there in 6.0 and above, does anyone know how to get it from a 5.1 disk image? From: Curtis Preston [mailto:[EMAIL PROTECTED] Sent: 30 July, 2008 1:23 PM To: Michitsch, John; Martin, Jonathan; veritas-BU Subject: RE: [Veritas-bu] Recover Data from a Netbackup 5.1 image. I also believe that capability showed up in 6.0. Curtis Preston | VP Data Protection GlassHouse Technologies, Inc. T: +1 760 710 2004 | C: +1 760 419 5838 | F: +1 760 710 2009 [EMAIL PROTECTED]mailto:[EMAIL PROTECTED] | www.glasshouse.comhttp://www.glasshouse.com/ Infrastructure :: Optimized From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michitsch, John Sent: Wednesday, July 30, 2008 10:09 AM To: Martin, Jonathan; veritas-BU Subject: Re: [Veritas-bu] Recover Data from a Netbackup 5.1 image. You understand correctly. From: Martin, Jonathan [mailto:[EMAIL PROTECTED] Sent: 30 July, 2008 11:54 AM To: Michitsch, John; veritas-BU Subject: RE: [Veritas-bu] Recover Data from a Netbackup 5.1 image. If I understand correctly, you did a backup to disk, and copied those files to a remote site? But now that those images have expired their catalog entries are gone, but you still have the coped backup to disk files? I've successfully imported disk images without the corresponding db\images folder on 6.0 MP4 but not on 5.1. -Jonathan From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michitsch, John Sent: Wednesday, July 30, 2008 11:25 AM To: veritas-BU Subject: [Veritas-bu] Recover Data from a Netbackup 5.1 image. Does anyone know of a way to get data out of an image file created by Netbackup 5.1? We were copying the disk images and sending them offsite. After they are expired from the catalog, there is no way to import the image. We also do not have a copy of the catalog from the same time as the image file. Has anyone successfully restored from a Netacbkup 5.1 image file that was expired from the catalog and didn't have an old copy of the catalog? We already called Symantec and they sent us the doc stating there is no way to do it. I was just wondering if anyone here has made this happen. Thanks. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] directive set backups using bpbackup on client.
Does anyone know how to do a directive set (System State or Shadow Copy Components) backup using bpbackup from the client? Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Vault question.
One of our Vault polices was in a hung state. I thought I accounted for all of the batches before I killed the job. After killing it, batch 22 of 43 completed, 0 of 10 images duplicated. Since I killed it, there is nothing in the failed.images file. The batch log in the sessions folder shows nothing. What is the easiest way to find out what images were not duped? Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Backing up CIFs shares
We used to use Backup Exec to back up the shares, but Netbackup using NDMP makes a world of difference. You would be wise to choose the NDMP method. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jenner, Steven Sent: 26 June, 2008 10:25 AM To: Veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Backing up CIFs shares Hi, I have come across a problem that I am hoping someone here can assist me with. I am running a NetBackup environment with one master server and two media servers all running v5.1MP6 (and on Solaris9) these are backing up 250+ clients which are a mixture of Windows, Linux and Solaris and some MSSQL clients; again the clients are running 5.1MP6. I also have a NetApp filer supplying NAS and San storage to some of the aforementioned clients. So, my question is how do I set up the NetBackup agent to capture the data that is held within a CIFs share that is being presented to a Windows client? Is this possible with a standard client license? Backing up the Windows client using the ALL LOCAL DRIVES directive and selecting the Backup network drives box under attributes does not appear to capture the data. Thanks in advance, Steve. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] One report with all client backup report withtheirsuccess o
Does anyone know how to produce a report showing all non successful backups only? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: 10 June, 2008 12:59 PM To: VERITAS-BU@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] One report with all client backup report withtheirsuccess o The bperror variants will only report back as deep as your log depth. If you want backups on tape for long periods of time, use bpimagelist. Note: these aren't *all* backups for that time period, just backups that haven't expired yet. -M -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of seemayur Sent: Monday, June 09, 2008 3:03 PM To: VERITAS-BU@mailman.eng.auburn.edu Subject: [Veritas-bu] One report with all client backup report withtheirsuccess o I use this command -- D:\Program Files\Veritas\NetBackup\bin\admincmd\bperror -U -backstat -hoursago 24 -columns 160 -- pipe the output to a text file and then use blat (I'm on Windows) to email the data. Mayur +-- |This was sent by [EMAIL PROTECTED] via Backup Central. |Forward SPAM to [EMAIL PROTECTED] +-- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] master vs. media servers behind firewalls.
This is a question about a Netbackup 6.5 deployment. We are currently using separate master servers for our internal clients and our external clients in both of our primary datacenters. This equates to four separate backup environments to manage. We would like to have one master for all of our environments. We are thinking about one master server in our primary location, a media server in the secondary location and media servers for the two external environments. We would open ports to allow the external media servers to communicate through the firewall to our internal master server, giving us a single view for all backups. However, when reading the documentation, Symantec recommends having a separate master per firewall domain and using NOM to manage all of them. We do not want to pay for three additional master server licenses and a NOM license. Is anyone already doing this, or have any opinions as to why I would not do it? Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Copying Policies to new Master
The \Program Files\Veritas\NetBackup\db\class contains all of your policies and their respective configurations. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jackson, Todd Sent: 08 April, 2008 10:09 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Copying Policies to new Master Guys, Can anyone tell me how I can copy the Policies over to a new Master? I don't need to bring in the catalog ... I just want the same policies and attributes, schedules etc. Using Windows for bother Masters .. how can I do this? thanks Jackson ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] script user backups of Exchange 2007.
Does anyone know if you can script a user directed backup in NBU 6.5.1? We do not want NBU to truncate the transaction logs as we are using Netbackup Snapmanager for Exchange to truncate the logs. Looking at the documentation, I only see how to create a user backup, but it doesn't look like I can script it. Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] script user backups of Exchange 2007.
Excuse the typo, that should read we are using Network Appliance Snapmanager for Exchange -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michitsch, John Sent: 27 March, 2008 6:50 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] script user backups of Exchange 2007. Does anyone know if you can script a user directed backup in NBU 6.5.1? We do not want NBU to truncate the transaction logs as we are using Netbackup Snapmanager for Exchange to truncate the logs. Looking at the documentation, I only see how to create a user backup, but it doesn't look like I can script it. Thanks. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] MSSQL Agent Backups
We have an active/active SQL cluster with two virtual SQL instances. We configured a SQL policy to back up the virtual SQL instances. We also have a Windows policy to back up the OS'es on each node. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mellor, Adam A. Sent: 13 February, 2008 4:15 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] MSSQL Agent Backups Good evening, We will be using the NBU Agent for backing up MSSQL databases (instances), RANT Portion Configuring the policies in netbackup (6.5.1 btw) following the Veritas Netbackup for Microsoft SQL Server Administrators Guide :-) going through configuring the systems in a Microsoft Clustered environment. My Colleague (windows admin) and I (unix admin) are confused/arguing with 1 aspect and I would like to ask other's how they have configured it. In the doco (pg125 item 3) it says to Create a standard backup policy (say, STDPOLICY). Add all physical names in the cluster into the client list of STDPOLICY. My interpretation is, this is to create a Windows-NT Type policy to ensure you are backing up the cluster node. How my colleague has configured it under instruction from symantec I understand this is a Standard type policy (aka Unix/Linux) that SQL requires. /RANT Portion Back to my question, How have others configured SQL agent ( and I suppose the filesystem as well) Policies for MSSQL server in clustered environments ? Adam Mellor Senior Unix Support Analyst CF IT TECHNOLOGY SERVICES Woodside Energy Ltd. NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu