Re: [Veritas-bu] LTO 3 - Windows 2003 SP1 - NBU 5.x poor performance
Hi Marco So I can understand whats going on here, do you have a dedicated backup lan for the clients and the media/master server? If so it may not be the drive or the san connectivity which is the issue. I had the same at one of my branches. Firstly can both clients and master/media server resolve its backup interface. Use nslookup and then reverse it. Then use bpclntcmd both ways. If this is all good try ftp'ing a large file from the client to the media server over the backup lan. This will show whether its the lan or not. Send the file back to the client over the backup lan too. If this looks good try using the ip address of the client in the policy instead of the name. This worked for us, until we were able to fix up dns/wins. You may want to create a new storage unit with the ipaddress instead of the media server name for the purpose of testing. Let e know how this goes. Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] "marco chiapusso" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 03/01/2007 22:52 To [EMAIL PROTECTED] cc [EMAIL PROTECTED], veritas-bu@mailman.eng.auburn.edu Subject Re: [Veritas-bu] LTO 3 - Windows 2003 SP1 - NBU 5.x poor performance My SAN.. ok I have 4 switch, 2 Fabric. The fabric have a 8 MB trunk (4x2 GB) The IBM 3584 tape library it's connected there... >From: [EMAIL PROTECTED] >To: "marco chiapusso" <[EMAIL PROTECTED]> >CC: [EMAIL PROTECTED] >Subject: Re: [Veritas-bu] LTO 3 - Windows 2003 SP1 - NBU 5.x poor >performance >Date: Thu, 4 Jan 2007 09:45:33 +1100 > > >Marco, > >I'd look at the way your SAN is setup, maybe the buffers are setup more >for writes >than reads. This could be why you are getting bad performance between the >SAN >and media server. I'm assuming you have the SAN fibre attached with decent > >bandwidth ? > >Regards, > >Dominik > > > > > > >"marco chiapusso" <[EMAIL PROTECTED]> >Sent by: [EMAIL PROTECTED] >04/01/2007 09:28 AM > >To >[EMAIL PROTECTED] >cc >veritas-bu@mailman.eng.auburn.edu >Subject >Re: [Veritas-bu] LTO 3 - Windows 2003 SP1 - NBU 5.x poor performance > > > > > > >Austin, >I'm using 1 drives, and I want to use just one for each job... > > > >From: "Austin Murphy" <[EMAIL PROTECTED]> > >To: "marco chiapusso" <[EMAIL PROTECTED]> > >CC: veritas-bu@mailman.eng.auburn.edu > >Subject: Re: [Veritas-bu] LTO 3 - Windows 2003 SP1 - NBU 5.x poor > >performance > >Date: Wed, 3 Jan 2007 17:24:00 -0500 > > > >How many "Maximum concurrent drives used for backups" is your storage > >unit configured to write to? > > > >Start small and work your way up. > >Set your STU to 1 drive and MPX=4. Measure performance. > >increase MPX to 8. measure... > >Set the STU to 2 drives. measure... > > > >"Waiting for full buffer" means you are starving your tape drives. > > > >Austin > > > >On 1/3/07, marco chiapusso <[EMAIL PROTECTED]> wrote: > >>Hi Guys, still in trouble with LTO3 performance... > >>I've change everything but it doesn't work!!! oufff > >>I installed a lot of NBU domain but this time I hate them all!!! > >> > >>The enviroment it's all Windows 2003 sp1 , 1 master and 4 SAN Media > >>Manager > >>(clustered) > >>The tape library it's an IBM 3584 with 4 IBM LTO3, SAN connected > >> > >>The maximum performance it's about ehm ehm 7 MB/sec ... kill me plz!!! > >> > >>I have tried all the combination > >>SIZE_DATA_BUFFERS 256k > >>NUMBER_DATA_BUFFERS 32 - 48 - 64 -128 -256 > >> > >>MPX 4 - 8 > >>FRAGMENT SIZE 4 MB & 10GB > >> > >>The funny things it's that I have some optimization of my perfromance >from > >>5 > >>MB/sec to 7 using NUMBER at 64, incrising them upper to 256 no >CHANGES!!! > >> > >>I look to BPTM logs (verbose 5) I find a lot of waited for full >buffer... > >> > >>Now I'm reading something about tape.sys and Maximumsg... changed >Maximum > >>to > >>FF nothing!!! > >> > >>I'm using IBM tape drivers on windows... all the media server have the > >>same > >>performance issue.. > >> > >>Any IDEA plz! Dont' say open a case to support ..!!! LOL > >> > >>Txs again guys!!! > >> > >>_ > >>Usa il tuo PC come un t
[Veritas-bu] Error code 13
All Environment windows 2003 master media server Client windows 2003 Veritas Netbackup 5.1 mp4 Dedicated backup lan Backups fail with error 13 when policy uses the backup hostname IE. hostname-bk Backups work ok when the ipaddress of the client is used in the policy instead of the hostname. Anyone seen anything similar ? Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] - This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] NetBackup 5.1 MP4 and Backupexec 9
All Can NetBackup and BackupExec co-exist on the same client. Netbackup services will be disabled ready to do a migration. Regards Mark Goodchild This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Can Backupexec (any version) read or import Netbackup tapes?
Hi All I have managed to import some backupexec tapes into our NetBackup environment and was wondering if it was possible to do it the other way around Backupexec to be able to read or import NetBackup tapes ? Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup 5.x course notes
Hi Fiona Thanks for your reply Looks like I wil have to create my own for the time being. Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] "Fiona Greenhough" <[EMAIL PROTECTED]> 24/08/2006 12:55 To: "Clooney, David" <[EMAIL PROTECTED]>, "WEAVER, Simon" <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>, cc: Subject: RE: [Veritas-bu] Netbackup 5.x course notes Hi All Since everyone is looking for these I will share something. The organisation I work for is a training partner to Symantec education and even we cannot get the course notes electronically. We receive the slides and printed copies from Symantec but have a contract that says we will not distribute the material as it would loose Symantec and their training partners business. Sorry. Fiona -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Clooney, David Sent: 24 August 2006 13:08 To: WEAVER, Simon; [EMAIL PROTECTED]; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Netbackup 5.x course notes Me too From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: 24 August 2006 08:33 To: '[EMAIL PROTECTED]'; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Netbackup 5.x course notes I would also be interested in this as well please. Thank you very, very much Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 24 August 2006 08:29 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Netbackup 5.x course notes Hi Does anyone have an electronic version of NetBackup 5.x course notes they want to share ? Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. This email is for the intended addressee only. If you have received it in error then you must not use, retain, disseminate or otherwise deal with it. Please notify the sender by return email. The views of the author may not necessarily constitute the views of Astrium Limited. Nothing in this email shall bind Astrium Limited in any contract or obligation. Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England Notice to recipient: The information in this internet e-mail and any attachments is confidential and may be privileged. It is intended solely for the addressee. If you are not the intended addressee please notify the sender immediately by telephone. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to external clients any opinions or advice contained in this internet e-mail are subject to the terms and conditions expressed in any applicable governing terms of business or client engagement letter issued by the pertinent Bank of America group entity. If this email originates from the U.K. please note that Bank of America, N.A., London Branch and Banc of America Securities Limited are authorised and regulated by the Financial Services Authority. DISCLAIMER: This message may contain information which is confidential, private or privileged in nature. If you are not the intended recipient, you may not peruse, use, disseminate, distribute or copy this message or file which is attached to this message. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and thereafter return and/or destroy the original message. Any views of this communication are those
[Veritas-bu] Netbackup 5.x course notes
Hi Does anyone have an electronic version of NetBackup 5.x course notes they want to share ? Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Storagetek L500 Library
Hi All Thanks for your replies to this issue. It turned out to be 2 faulty scsi cables both with the same fault so when we changed them we got the same error. I can now see the library and both drives over scsi. I have had 5 tapes put in, 3 directly in the library and 2 in the cap door. When I run an inventory with update it says its upto date When I run an inventory with update and empty the cap I get a 2295 error auto empty media access port request rejected by tldcd, Robot hardware or communication error If I use robtest and show all slots no they are all empty. Any ideas ? Does anyone know whether this library has specific windows 2003 drivers? I cant find any. Regards Mark Goodchild __ Hi all Is anyone out there using storagetek l500 library with windows 2000 or 2003 and netbackup 5.1 mp4. The issue I am facing is the changer does not appear in windows device manager but the 2 hp lto2 drives do. Regards Mark Goodchild ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Storagetek L500 Library
Hi all Is anyone out there using storagetek l500 library with windows 2000 or 2003 and netbackup 5.1 mp4. The issue I am facing is the changer does not appear in windows device manager but the 2 hp lto2 drives do. Regards Mark Goodchild ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Windows XP client software
Hi All Does anyone have a link to just the client software for windows xp clients. I am offsite and dont have access to the cd's Thanks Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netware file excludes
Hi all Anyone know how to exclude always open files from a netware backup? Netbackup 5.1 MP4 Netware 6 Thanks Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Windows 2003 date format
All Does anyone know how to format the date in a windows 2003 batch script I want to change dd/mm/yy to mm/dd/yy Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] bpstart_notify
All I have inherited a windows 2003 netbackup 5.1 mp4 master server. I want to automate the robot inventory. I have a bpstart_notify.Windows2003_Backup.bat file in the netbackup bin folder. It runs quite happily, unfortunately it does not wait for the inventory to finish. Therefore all my backups fail error 96, but rerun quite happily. How do I make the .bat file wait for the inventory to complete. I have tried sleep n and start /wait but they both do nothing. Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Slightly off subject
All Slightly off subject Generallywe are looking for a vendor toolkit that can. a) monitor a given server task I/O workload on a given 'real' storage subsystem environment/configuration. b) allow logical modelling changes within the tool to create an alternative (theoretical) storage subsystem environment. c) accurately predict/model the effect to the monitored task of a variety of assumed changes to the physical/logical storage subsystem environment. d) this 'effect' will ideally demonstrate any changes to individual Write-I/O's (in milliseconds) and any changes to the tasks overall elapsed time. Specifically... Tool must provide for monitoring/calibration of tasks on Solaris and Windows servers. Tool will understand (and be able to model) the runtime environments for all major storage subsystem suppliers (minimally EMC and HDS). Tool will understand (and be able to model) the runtime environments for all major SAN switch suppliers (minimally Cisco and Mcdata). Tool must be able to model the effect of.. - changing the tasks logical I/O blksize - activating EMC or HDS synchronous replication over any required distance up to 200 km (based upon DWDM fibre connectivity) - different simulated loads (simulated I/O path loading, simulated storage cache loading, etc) laid over the monitored workload. - all the major switch/storage configuration settings (logical and physical). - combinations of all the above. Any help would be appreciated Regards Mark Goodchild Branches Remediation J.P.Morgan Chase Phone: 01202347149 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Large amount of estimated data to be backed up
All We have upgraded our netware clients to NetBackup 5.1 MP4 in line with the master and media servers and the estimated kilobytes looks a bit strange 3454716731025207608 = 3014 exabytes Anyone else seen this in the GUI ? Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Slow NetWrae backups.
Hi all Our environment is netbackup 5.1 mp3 LTO2 tapes drives End to end GIGE network Netwrare 6 sp4 Our backups are running at 1.5 - 3.5 mb/sec Are there any performance parameters that we can set in Netware to help speed things up ? I am not a NetWare person so be gentle :) Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Remote admin console only seeing another master server as a client
All Help needed. We have a remote admin server which administers all our European master servers. They are all 5.1 MP3 or MP4 When I connect to one of them it says its only a client. All server entries are good and connection is successful I do get this error in bpcd log "bpcd setup_sockopts: setsockopt 1 failed: h_errno 10022" Any ideas. Thanks Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] 1 Terabyte limit per backup
All I have upgraded to netbackup 5.1 MP3, AIX Master and media servers. Source data Netware volume I still have the 1 terabyte backup limit exceded problem (error 130) Anyone else still having the same problem. Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Just in case you have nott seen it
Dear Valued Symantec Customer, This is to inform you that Symantec Enterprise Technical Support has just issued a software alert. This is a critical technical issue for: -VERITAS NetBackup (tm) Enterprise Server / NetBackup Server: 5.1 through 5.1 Maintenance Pack 4 (MP4) and 6.0: Windows 2003 platforms only -VERITAS Bare Metal Restore for NBU 4.7 through 4.7 Maintenance Pack 3 (MP3): Windows 2003 platforms only For complete details, description of this issue and our recommendations, please refer to the following reference document: http://support.veritas.com/docs/280511 This software alert was generated because product quality and responsiveness to customers are consistent Symantec Corporation hallmarks. Any issues that could potentially affect the integrity of the data in your environment, no matter how rare, are viewed as extremely serious. Thank you for choosing Symantec. Sincerely, Symantec Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
[Veritas-bu] Annoying celendar scheduler problem
All I have a unix policy with 20 clients in it The window is open from 21:00:00 for 7 hours till 04:00:00 It has a daily schedule mon - thu weekly fri monthly last friday in the month The issue is as follows On the 28th one client in the unix policy ran till 00:04 (29th) after starting at 21:09.00 The schedule has retries allowed after runday checked. On the 29th the scheduler checked the schedules, not a monthly, not a weekly and found the daily was not due to run If it is the case that one client will stop all other clients in the same policy from backing up because it ran past midnight, then why the hell does the scheduler check every client in the policy, and why has the retries allowed after runday not allowed the policy to run again. Maybe I should consider using frequency based schedules Any ideas ? Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Typical catalog sizes?
Our catalog has just passed 120GIG, but we do have a sed load of infinite retention backups. Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED] John Priddy <[EMAIL PROTECTED]To: veritas-bu@mailman.eng.auburn.edu > cc: Sent by:Subject: [Veritas-bu] Typical catalog sizes? [EMAIL PROTECTED] .auburn.edu 02/12/2005 00:16 I currently backup approx 40 servers of Solaris, Windows, and Linux. I was poking around on the backup server the other day which contains the catalog and i saw that it was at 23 gigs. Is this normal? We are a development shop and have what I would consider more 'files per server' than usual, especially on the older Solaris machines used for software development, but 23 gigs seems a bit over the top. It doesn't appear to be related to the amount of data on each machine, because some of the servers with the most data are also the smallest in size in the catalog. As an example a machine that currently has almost 2TB of storage is taking up 500meg of catalog, but another with less than 40gigs of storage is taking up 2GB of catalog. This doesn't appear to be related to the platform as the linux and windows machines exibit the same catalog/storage relationships. Browsing through backups from the java console and backups of the db itself s! eem to be pretty quick. My question is do most of you see catalogs of sizes like this? Our overall raw diskspace would be around 5 or 6 TB i guess. This catalog is only about 3 months old so far and I only have another 20gigs on that volume left... Machine is NB 5.1MP3 running on Solaris 10 on SunV240, all clients are 5.1 also. Thanks John ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] List of tapes required for a restore from a client
All Is there anyway to get a list of tapes required for a restore from a client I have tried bpclimagelist but there is no media option Netbackup 5.1 MP3 Regards Mark Goodchild E-Mail: [EMAIL PROTECTED]
[Veritas-bu] IBM 3582 And Windows 2000 SP4
Hi All Is anyone running an IBM 3582 library with windows 2000 SP4 Every time I put an ibm driver on the changer and then run scan I get The instruction at "0x" referenced memory at "0x", The memory could not be "read" I have tried driver versions 6.0.6.6 and 6.0.8.2 If I make the changer unknown and reboot, the changer and scan works but is not seen by netbackup Regards Mark Goodchild EMEA DCS Storage Management Group J.P.Morgan Chase Phone: 6060 Option 2 Mail: Mark A Goodchild/[EMAIL PROTECTED] E-Mail: [EMAIL PROTECTED]
