[Veritas-bu] Help please
Hello my dear gurus. I tried REQUIRED_INTERFACE, as someone suggested, but didnt work because, when my first interface fail (the required one) and the second one (192.168.2.153) comes up, Im still unable to do backup. The workaround is to manually edit /etc/hosts of the server, change the ip address of the desired machine to 192.168.2.153 and run the manual backup. Any other thoughts ? Thank you again. Solaris 10 Netbackup 4.5_FP6 Today I was looking at the Activity Monitor and saw that one of my scheduled backups didnt run. I tried to run manually and received the same error: RMAN-00571: === RMAN-00569: === ERROR MESSAGE STACK FOLLOWS === RMAN-00571: === RMAN-03009: failure of backup command on ORA_SBT_TAPE_1 channel at 07/20/2007 09:27:48 ORA-19506: failed to create sequential file, name=crin9ski_1_1, parms= ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: Failed to open for backup. So I searched for some light in the bprd logs and found: 09:35:13.368 [1326] 2 logconnections: BPRD ACCEPT FROM 192.168.200.153.47732 TO 192.168.2.86.13720 09:35:13.386 [1326] 16 connected_peer: gethostbyaddr() for 192.168.200.153 failed, HOST_NOT_FOUND (1) 09:35:13.404 [1326] 32 bprd: cannot determine connection host name 09:35:13.409 [10131] 2 listen_loop: select() interrupted 09:37:51.725 [10131] 2 bprd: socket fd from accept() is 7 Thats why the backup failed, the master server dont know this ip, because the /etc/hosts show that the machine Im backing up has the IP address 192.168.200.150. My problem is that I have 2 NICs on this machine for redundancy. One has the IP 150 and the other has the ip 153. When the first one fail, the second one answer for the machine. What can I do to netbackup recognize both IP as the same machine? Thank you so much. __ Daniel Abramides Sigrist DBA Oracle Projeto SIGRES Tel: (11) 3824-2074 Telefonica Pesquisa e Desenvolvimento Rua Brigadeiro Galvao, 291 - 7º Andar Barra Funda - Sao Paulo, SP [EMAIL PROTECTED] ocp2 image003.jpg___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Help please
How about talking to your network guys and bonding the two interfaces to the same IP? There's been plenty of talk about it on these forums before. It would bond the nics below the IP level so they can both share and load balance the same IP's traffic. From a cisco perspective you're talking about etherchannel, in windows its called teaming. I've got several solaris boxes here, but none configured this way. Perhaps one of our resident Solaris gurus could chime in? The only other way I can come up with to do this is how we run our backend dr network here. Give the 2nd interface another hostname, and configure a policy to use it. When the first interface fails, manually run the policy with the 2nd hostname. Alternately, fix the nic issue? -Jonathan From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Sigrist Sent: Monday, July 23, 2007 8:24 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Help please Hello my dear gurus. I tried REQUIRED_INTERFACE, as someone suggested, but didn't work because, when my first interface fail (the required one) and the second one (192.168.2.153) comes up, I'm still unable to do backup. The workaround is to manually edit /etc/hosts of the server, change the ip address of the desired machine to 192.168.2.153 and run the manual backup. Any other thoughts ? Thank you again. Solaris 10 Netbackup 4.5_FP6 Today I was looking at the Activity Monitor and saw that one of my scheduled backups didn't run. I tried to run manually and received the same error: RMAN-00571: === RMAN-00569: === ERROR MESSAGE STACK FOLLOWS === RMAN-00571: === RMAN-03009: failure of backup command on ORA_SBT_TAPE_1 channel at 07/20/2007 09:27:48 ORA-19506: failed to create sequential file, name=crin9ski_1_1, parms= ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: Failed to open for backup. So I searched for some light in the bprd logs and found: 09:35:13.368 [1326] 2 logconnections: BPRD ACCEPT FROM 192.168.200.153.47732 TO 192.168.2.86.13720 09:35:13.386 [1326] 16 connected_peer: gethostbyaddr() for 192.168.200.153 failed, HOST_NOT_FOUND (1) 09:35:13.404 [1326] 32 bprd: cannot determine connection host name 09:35:13.409 [10131] 2 listen_loop: select() interrupted 09:37:51.725 [10131] 2 bprd: socket fd from accept() is 7 That's why the backup failed, the master server don't know this ip, because the /etc/hosts show that the machine I'm backing up has the IP address 192.168.200.150. My problem is that I have 2 NIC's on this machine for redundancy. One has the IP 150 and the other has the ip 153. When the first one fail, the second one answer for the machine. What can I do to netbackup recognize both IP as the same machine? Thank you so much. __ Daniel Abramides Sigrist DBA Oracle Projeto SIGRES Tel: (11) 3824-2074 Telefonica Pesquisa e Desenvolvimento Rua Brigadeiro Galvao, 291 - 7º Andar Barra Funda - Sao Paulo, SP [EMAIL PROTECTED] image003.jpg___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
What I like about CDC/OpenVision/VERITAS/symantec Backup Plus/AXXion-NetBackup/NetBackup whatever product Is that there are many different ways to configure and run it. All of them have benefits and drawbacks. It keeps the product interesting. I'm OK, you're OK, our backups are OK ...wow Curtis, your really showing your age with that one :-) Bob Stump Analysts International contracted to: DIT IS TS Backup and Recovery 7285 Parsons Drive Lansing, MI 48913 Tel: (517) 636-4076 Fax: (517) 636-0402 Email: [EMAIL PROTECTED] Curtis Preston [EMAIL PROTECTED] 12/8/2006 2:17 AM I also agree with you in principal. I've just done what you want in a different way. I've historically configured catalog backups in such a way that they don't use the NetBackup pool. That way I separate catalog and regular backups, but the default NetBackup pool (that every policy picks anyway) can be used for regular backups. If you're not running 6.0, I think your way or my way is probably just fine. I'm OK, you're OK, our backups are OK. ;) With 6.0, however, there's a dedicated pool for catalog backups, and it's not the NetBackup pool. --- W. Curtis Preston, Author of Backup Recovery and Using SANs and NAS VP Data Protection GlassHouse Technologies -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 05, 2006 11:01 PM To: 'Haskins, Steve'; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because
Re: [Veritas-bu] help please
I also agree with you in principal. I've just done what you want in a different way. I've historically configured catalog backups in such a way that they don't use the NetBackup pool. That way I separate catalog and regular backups, but the default NetBackup pool (that every policy picks anyway) can be used for regular backups. If you're not running 6.0, I think your way or my way is probably just fine. I'm OK, you're OK, our backups are OK. ;) With 6.0, however, there's a dedicated pool for catalog backups, and it's not the NetBackup pool. --- W. Curtis Preston, Author of Backup Recovery and Using SANs and NAS VP Data Protection GlassHouse Technologies -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 05, 2006 11:01 PM To: 'Haskins, Steve'; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE
Re: [Veritas-bu] help please
Whoops bppclient is what you want. Sorry I was multi-tasking and like Windows, crash often !! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 07:02 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I look forward to your email entries. Think you could remind me how to generate a text file of a client list? Regards -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 06, 2006 12:01 AM To: Haskins, Steve; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE
Re: [Veritas-bu] help please
I feel your pain... -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 06, 2006 12:48 AM To: Haskins, Steve; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Whoops bppclient is what you want. Sorry I was multi-tasking and like Windows, crash often !! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 07:02 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I look forward to your email entries. Think you could remind me how to generate a text file of a client list? Regards -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 06, 2006 12:01 AM To: Haskins, Steve; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ
Re: [Veritas-bu] help please
Hi again! Well that last image shows NO storage unit present! you could run the Device Configuration Wizard again, and it should find the robot+drives, and create the applicable named storage unit. Or you can manually create one. I am assuming of course that this image is correct, and that there is no storage unit present? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] -Original Message- From: nizar motasim [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 11:25 To: WEAVER, Simon; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please _ From: WEAVER, Simon [EMAIL PROTECTED] To: 'nizar motasim' [EMAIL PROTECTED], veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Date: Tue, 5 Dec 2006 10:57:41 - Are there any tapes in your SCRATCH POOL ? It sounds like NetBackup is searching for tapes or free tapes it can use for Backups! In fact, has a scratchpool been defined? What volume pool is your Backup Policy using? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] -Original Message- From: nizar motasim [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 10:34 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] help please Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar _ Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England _ Don't just search. Find. MSN Search http://g.msn.com/8HMAEN/2749??PS=47575 Check out the new MSN Search! This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
Dave To be fair, if this is the 1st time its been used by Nizar, the NetBackup Volume pool is there by default, and I do recall when I put in my 3.4 and 4.5 versions of NBU, the tapes all went to the scratch pool when loaded in from the robots. Its easily done, and its one feature I see quite often! I do not quite understand why SCRATCH is just not defined out of the box ?? Any ideas? Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 11:34 To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
Hi Your tape drives are configured as hcart3: Index DriveName DeviceName Type Shared Status * * ** ** ** 0 HPUltrium3-SCSI0 \\.\Tape0hcart3 No UP TLD(0) Definition DRIVE=2 Your Storage Unit is also config'ed as hcart3: Density: hcart3 - 1/2 Inch Cartridge 3 Robot Type/Number: TLD / 0 BUT - Here's your problem: ALL the tapes in your robot are defined as DLT. They should be HCART3. 3000LT DLT TLD 0 6 - - - AVAILABLE 3001LT DLT TLD 0 19 - - - AVAILABLE 3002LT DLT TLD 0 22 - - - AVAILABLE 3003LT DLT TLD 0 10 - - - AVAILABLE 3004LT DLT TLD 0 33 - - - AVAILABLE 3005LT DLT TLD 0 17 - - - AVAILABLE 3006LT DLT TLD 0 21 - - - AVAILABLE I don't think you will be able to change the density in the GUI. You will have to delete all the DLT media and add it again. When you do an inventory, go into Advanced Settings and either select hcart3 as 'Media Type' under 'Media Settings' or create 'Barcode Rules'. (For more info, see the Media Manager Admin Guide.) Regards Marianne From: nizar motasim [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 13:45 To: Marianne Van Den Berg Subject: RE: [Veritas-bu] help please See this From: Marianne Van Den Berg [EMAIL PROTECTED] To: nizar motasim [EMAIL PROTECTED] Subject: RE: [Veritas-bu] help please Date: Tue, 5 Dec 2006 13:17:54 +0200 Hi What is the density of your tape drives, media and Storage unit? If there is a mismatch in any one of these, you will get a 96. If the density of your tape drives are 'hcart2' the density of the media should also be hcart2. The Storage unit must point to the correct robot number on the master/media server and density must also be hcart2. (LTO can be hcart, hcart2 or hcart3. The only thing that's important is that the same density is specified everywhere.) If you still need help, please send me the output of the following commands. I should be able to help you. Run these commands from a command window: .Veritas\volmgr\bin tpconfig -d .Veritas\volmgr\bin vmquery -a -bx .Veritas\netbackup\bin\admincmd bpstulist -U .Veritas\netbackup\bin\goodies available_media Lastly, please tell me which pool name is specified in the policy. Regards Marianne From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of nizar motasim Sent: 05 December 2006 12:34 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] help please Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
I should add that for those of us who started using NetBackup for the first time from version 6 the catalogue volume pool is likely to be CatalogBackup (when using hot catalogue backups). We actually use the NetBackup volume pool for data backups (fed from scratch) as that seemed logical during the install. From the Admin Guide:- NetBackup automatically creates a CatalogBackup volume pool that is selected by default only for NBU-Catalog policy types. Offline, cold catalog backups use media from the NetBackup volume pool. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Stump Sent: Wednesday, 6 December 2006 5:55 am To: Dave Markham; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To me it is Best Practise and to many NetBackup admins to only populate the NetBackup pool with catalog tapes. It makes things a lot easier to keep track of and cuts down the number of vmqueries. Dave Markham [EMAIL PROTECTED] 12/5/2006 11:40 AM Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? ** This electronic email and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed. The views expressed in this message are those of the individual sender and may not necessarily reflect the views of the Christchurch City Council. If you are not the correct recipient of this email please advise the sender and delete. Christchurch City Council http://www.ccc.govt.nz ** ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! -- -- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. - Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] help please
Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! -- -- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any
Re: [Veritas-bu] help please
I look forward to your email entries. Think you could remind me how to generate a text file of a client list? Regards -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 06, 2006 12:01 AM To: Haskins, Steve; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE! -- -- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo
Re: [Veritas-bu] help please
Bppllist I believe. I normally output with the c:\list.txt If I remember -U works well :-) Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 07:02 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I look forward to your email entries. Think you could remind me how to generate a text file of a client list? Regards -Original Message- From: WEAVER, Simon [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 06, 2006 12:01 AM To: Haskins, Steve; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please Someone agrees with me :-))) Wahoo! I must have said something right. ! Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Haskins, Steve [mailto:[EMAIL PROTECTED] Sent: 06 December 2006 06:58 To: WEAVER, Simon; [EMAIL PROTECTED]; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: RE: [Veritas-bu] help please I concur, less conflicts to occur. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WEAVER, Simon Sent: Tuesday, December 05, 2006 11:56 PM To: '[EMAIL PROTECTED]'; Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Sorry I am with Dave on this. Yes the NetBackup Pool is there by default, and yes if it remains unconfigured, new media goes into this pool, but ideally the NetBackup pool is for the placement of catalog backups. Its much, much easier to keep a track of the tapes by seperating them into corresponding pools. Of course, depends on your environemnt, type of client, backups, volume configuration, ect Regards Simon Weaver 3rd Line Technical Support Windows Domain Administrator EADS Astrium Limited, B23AA IM (DCS) Anchorage Road, Portsmouth, PO3 5PU Email: [EMAIL PROTECTED] -Original Message- From: Dave Markham [mailto:[EMAIL PROTECTED] Sent: 05 December 2006 16:41 To: Curtis Preston Cc: nizar motasim; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please Thats odd then, why when configuring catalogue backups to tapes it will only allow you to input media which is assigned to the Netbackup pool? Dave Curtis Preston wrote: The NetBackup pool isn't reserved for catalogue backups. It's the default pool that all backups go to unless you specify otherwise. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Markham Sent: Tuesday, December 05, 2006 3:34 AM To: nizar motasim Cc: veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] help please To note Nizar the Netbackup volume pool is a special pool reserved for the catalogue backups. I suggest you define a new volume pool for your backups and also create a scratch pool ( dont forget to check the scratchpool tick box ). Also dont forget in your policy or schedule to specify the volume pool you have just created. Thanks nizar motasim wrote: Dear I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 . Veritas see two drive and one robot ,my question is when i need to run any job backup the result is Media Manager volume Pool 12/5/2006 1:12:47 PM - started process bpbrm (3240) 12/5/2006 1:12:47 PM - connecting 12/5/2006 1:12:48 PM - connected; connect time: 00:00:01 12/5/2006 1:12:48 PM - started process bptm (3664) 12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0) 12/5/2006 1:12:52 PM - end writing unable to allocate new media for backup, storage unit has none available(96) 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries 12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available) Can you please help me because before one week I'm tring without ant result . TQ Nizar -- -- Express yourself instantly with MSN Messenger! MSN Messenger http://g.msn.com/8HMAEN/2743??PS=47575 Download today it's FREE