=?iso-8859-1?Q?R=3A_Don=B4t_want_VNC_to_start_up_with_windows-?= =?iso-8859-1?Q?startup?=
Jurgen; I think you have defined VNC to run as service. To start it manually, run the Windows ControlPanel and in the Administation Tools select Services. Select VNCServer from the list and change the startup mode from Automatic to Manual. I hope this can help you. Cheers Livio -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di [EMAIL PROTECTED] Inviato: venerdl 10 dicembre 2004 10.33 A: [EMAIL PROTECTED] Oggetto: Don4t want VNC to start up with windows-startup Dear List-Members! I have a small Problem with this very good program VNC ! Since I4ve installed the program on my Windows-2000-System, it always starts when windows is starting. I need to use remote control software just a few times a month and don4t want VNC to start up with the windows startup. When I need VNC I just want to start it manually ! Bad enough brwosing through the options of VNC I didn4t find the right option to avoide VNC starting with windows! I would be glad if someone of the list-members could help me with my problem, because I really would like to use VNC further ahead ! It4s a great and easy to use program but I have to deinstall it, if I couldn4t find a solution for this problem ! Thanks for your help and excuses for my Engisch, it4s just school-english :-) Best regards, J|rgen Rath ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: VNC viewer 3.3.7 for Windows shows no password prompt
Jan, I do not have any experience with OSXvnc for Mac OS 10 but as far as Win32 VNCServer is concerned (version 4.0b4), there exists the option "No Authentication or Encryption": whenever this option is checked there is no request for password when a viewer tries to connect to the server. I think you should look for something similar at your server side. Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Jan Aukes [mailto:[EMAIL PROTECTED] Inviato: lunedl 14 giugno 2004 21.02 A: [EMAIL PROTECTED] Oggetto: VNC viewer 3.3.7 for Windows shows no password prompt Hello, Today I downloaded VNC viewer 3.3.7 for Windows and copied it to my C drive. I made contact to my server which is OSXvnc for Mac OS 10. There I made a password. But when I started the VNC viewer it didn't ask for a password. So anybody who downloads the VNC viewer has access to my computer. That's not what I want. Can someone explain this to me/ Jan Aukes Amsterdam ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: firewall question...
Display number equals to: 0: if you want VNCServer to listen to connections on TCP port 5900 1: if you want VNCServer to listen to connections on TCP port 5901 2: if you want VNCServer to listen to connections on TCP port 5902 . . . etc Cheers Livio Curzola Software Engineer Gsm : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ** Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h indirizzato. Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per errore , vi preghiamo di cancellarlo e d'informare immediatamente " [EMAIL PROTECTED]". Ogni forma di riproduzione , distribuzione, copia, diffusione, modifica, a o di pubblicazione di questo messaggio senza il nostro Consenso scritto h strettamente proibito. Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , e non , necessariamente rappresenta la posizione della t&t. Di conseguenza t&t non autorizza o usa l'e mail qualke corrispondenza contrattuale. Niente ricevuto via mail ha validit` contrattuale. T&t si riserva il diritto doi monitorare tutte le comunicazioni mail circolanti sulla propria rete. Questa nota conferma l'avvenuto controllo del messaggio da virus noti. This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ** -Messaggio originale- Da: David Netzer [mailto:[EMAIL PROTECTED] Inviato: lunedl 31 maggio 2004 10.04 A: [EMAIL PROTECTED] Oggetto: firewall question... I red about VNC under Fire wall. that the port 5900+"Display number" should be added for it to work. What exactly is "Display number" ? Thank you. David,Oztec comp. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Can 4b5 coexist with v3?
Andy, VNCServer 4.0bx and 3.3.x can coexist on the same PC: the services will be named differently (VNC Server Version 4 and VNC Server or something similar, if I can remind exactly ). Be sure the two services listen on different ports (e.g. 5900 and 5901): otherwise the first service to start will lock the default (5900) port in exclusive mode. Cheers Livio Curzola Software Engineer Gsm : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ** Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h indirizzato. Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per errore , vi preghiamo di cancellarlo e d'informare immediatamente " [EMAIL PROTECTED]". Ogni forma di riproduzione , distribuzione, copia, diffusione, modifica, a o di pubblicazione di questo messaggio senza il nostro Consenso scritto h strettamente proibito. Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , e non , necessariamente rappresenta la posizione della t&t. Di conseguenza t&t non autorizza o usa l'e mail qualke corrispondenza contrattuale. Niente ricevuto via mail ha validit` contrattuale. T&t si riserva il diritto doi monitorare tutte le comunicazioni mail circolanti sulla propria rete. Questa nota conferma l'avvenuto controllo del messaggio da virus noti. This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ** -Messaggio originale- Da: Andy Hall [mailto:[EMAIL PROTECTED] Inviato: martedl 25 maggio 2004 02.16 A: [EMAIL PROTECTED] Oggetto: Can 4b5 coexist with v3? Hi, I'm looking to try 4b5 to get around the issue discussed in thread "winVNC server does not start as service, I have to stop/start every time". However, there are times when I need scaling client, which I understand is not worked into v4 yet. Can I run both at once, provided I use different install directories, and different ports? I'm wondering if the services can coexist. thanks, andy ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: R: how to get rid of addresses?
Julian, Julian, For VNCViewer 3.3.7, the entries you are willing to delete are stored in HKEY_CURRENT_USER\Software\ORL\VNCViewer\MRU. Kind Regards Livio Curzola Software Engineer Gsm : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ** Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h indirizzato. Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per errore , vi preghiamo di cancellarlo e d'informare immediatamente " [EMAIL PROTECTED]". Ogni forma di riproduzione , distribuzione, copia, diffusione, modifica, a o di pubblicazione di questo messaggio senza il nostro Consenso scritto h strettamente proibito. Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , e non , necessariamente rappresenta la posizione della t&t. Di conseguenza t&t non autorizza o usa l'e mail qualke corrispondenza contrattuale. Niente ricevuto via mail ha validit` contrattuale. T&t si riserva il diritto doi monitorare tutte le comunicazioni mail circolanti sulla propria rete. Questa nota conferma l'avvenuto controllo del messaggio da virus noti. This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ** -Messaggio originale- Da: Julian Ilicki [mailto:[EMAIL PROTECTED] Inviato: lunedl 24 maggio 2004 10.38 A: [EMAIL PROTECTED] Oggetto: Re: R: how to get rid of addresses? Thanks! I'm using VMC 3.3.7 under Windows. Does it make any difference? Julian On 24 May 2004 at 10:08, Livio Curzola wrote: > Julian, > > in Windows-based system, those addresses are kept in the registry. If you > are using VNC 4.0b4 viewer, you can find them under > HKEY_CURRENT_USER\Software\RealVNC\MRU. > Delete all the entries to get rid of the previously accessed addresses. > > Kind regards > > Livio Curzola > Software Engineer > > Gsm : +39 0481 523874 > mail : [EMAIL PROTECTED] > > t&t > telematica e trasporti srl > visit our web: www.t-t.it > > Autoporto pad.A c/o B.I.C. I 34170 GORIZIA > tel. +39 0481 523874 fax +39 0481 523879 > > its research centre > Area Science Park - Padriciano 99 I 34012 Trieste Italia > Tel: +39 040 3755371 - fax: +39 040 3755372 > e-mail : [EMAIL PROTECTED] > > > ** > Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h > indirizzato. > Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per > errore , vi preghiamo di cancellarlo e d'informare immediatamente " > [EMAIL PROTECTED]". Ogni forma di riproduzione , distribuzione, copia, diffusione, > modifica, a o di pubblicazione di questo messaggio senza il nostro > Consenso scritto h strettamente proibito. > Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , > e non , necessariamente rappresenta la posizione della t&t. Di conseguenza > t&t non autorizza o usa l'e mail qualke corrispondenza contrattuale. > Niente ricevuto via mail ha validit` contrattuale. > T&t si riserva il diritto doi monitorare tutte le comunicazioni mail > circolanti sulla propria rete. > Questa nota conferma l'avvenuto controllo del messaggio da virus noti. > > This document is intended for, and should only be read by,those persons to > whom it is addressed. Its contents are confidential and if you have received > this message in error, please delete it and notify us immediately, e-mail > "[
R: how to get rid of addresses?
Julian, in Windows-based system, those addresses are kept in the registry. If you are using VNC 4.0b4 viewer, you can find them under HKEY_CURRENT_USER\Software\RealVNC\MRU. Delete all the entries to get rid of the previously accessed addresses. Kind regards Livio Curzola Software Engineer Gsm : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ** Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h indirizzato. Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per errore , vi preghiamo di cancellarlo e d'informare immediatamente " [EMAIL PROTECTED]". Ogni forma di riproduzione , distribuzione, copia, diffusione, modifica, a o di pubblicazione di questo messaggio senza il nostro Consenso scritto h strettamente proibito. Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , e non , necessariamente rappresenta la posizione della t&t. Di conseguenza t&t non autorizza o usa l'e mail qualke corrispondenza contrattuale. Niente ricevuto via mail ha validit` contrattuale. T&t si riserva il diritto doi monitorare tutte le comunicazioni mail circolanti sulla propria rete. Questa nota conferma l'avvenuto controllo del messaggio da virus noti. This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ** -Messaggio originale- Da: Julian Ilicki [mailto:[EMAIL PROTECTED] Inviato: sabato 22 maggio 2004 16.47 A: [EMAIL PROTECTED] Oggetto: how to get rid of addresses? Hello, I am totaly new to this list, and I have a questions that might have been asked before: When I am opening a connection to the server, I have to provide the address to the server in the window "Connections details". The viewer remembers my entries, and if I connect to more then one server, I can open a list of previously connected servers to pick up one of them. The question is: How can I empty the list of previously used addresses in the window "Connections details", or how can I delete one of these addresses in the window? Julian +++ Julian Ilicki, Ph.D. __ e-mail: [EMAIL PROTECTED] Uppsala University voice, office: +46 - 18 4711513 Dept. of Sociology ___ fax, Dept.: +46 - 18 4711170 Box 821 __ voice, private: +46 - 18 204747 SE-751 08 Uppsala, Sweden __ cellular: +46 - 70 7533731 http://www.soc.uu.se/ __ http://welcome.to/ilek http://www.soc.uu.se/staff/julian_i.html +++ __ visit my genealogical site: http://welcome.to/ivanik ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Server authentication?
Ron VNCServer version 4.0b4 has an option to specify IP addresses that will be allowed to connect. See http://www.realvnc.com/v4/winvnc.html#5 Also, in version 3.3.7, the QuerySetting option lets you define which IP addresses are allowed to connect, which are not allowed as well as the IP addresses for which an explicit confirmation is required See http://www.realvnc.com/winvnc.html#4 Cheers Livio Curzola Software Engineer Gsm : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ** Questo documento h indirizzato a ,h potr` essere letto dalle persone a cui h indirizzato. Il suo contenuto h confidenziale e se avete ricevuto questo messaggio per errore , vi preghiamo di cancellarlo e d'informare immediatamente " [EMAIL PROTECTED]". Ogni forma di riproduzione , distribuzione, copia, diffusione, modifica, a o di pubblicazione di questo messaggio senza il nostro Consenso scritto h strettamente proibito. Qualsiasi punto di vista espresso in questo messaggio h del solo mittente , e non , necessariamente rappresenta la posizione della t&t. Di conseguenza t&t non autorizza o usa l'e mail qualke corrispondenza contrattuale. Niente ricevuto via mail ha validit` contrattuale. T&t si riserva il diritto doi monitorare tutte le comunicazioni mail circolanti sulla propria rete. Questa nota conferma l'avvenuto controllo del messaggio da virus noti. This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ** -Messaggio originale- Da: Ron Crummett [mailto:[EMAIL PROTECTED] Inviato: martedl 18 maggio 2004 19.34 A: [EMAIL PROTECTED] Oggetto: Server authentication? I am working on a project where I will need to remotely access several machines around the U.S. for routine upgrades. Some of the users are very security-conscious and would like to know when exactly I am accessing their machine; also to have the option to decline remote access if necessary. Is there a way that the remote servers can be notified that their machine is being accessed by a viewer, and do they have the option to decline access? If so, how? This is very important to my project. Thanks in advance. That's it from here. More to come as the plot thickens... Ron Crummett CayNet Consulting (208) 424-1228 office (208) 850-6589 cell http://www.caynetco.com ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: upload and download files
Hello Roberto; you need to install an ftp server on your server machine to download / upload files to / from it since RealVNC does not support file transfer. Alternatively, try a VNC flavour such as TightVNC or UltraVNC which support such feature Cheers -- Ciao Roberto; Hai bisogno di un server ftp sulla tua macchina server (quella, per intenderci, dove hai installato VNCServer) per caricare / scaricare file dal tuo PC poichi RealVNC non supporta direttamente il trasferimento dei file. In alternativa prova ad utilizzare una variante come TightVNC o UltraVNc che dispongono di tale caratteristica. Ciao Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Roberto Sartori [mailto:[EMAIL PROTECTED] Inviato: martedl 11 maggio 2004 10.07 A: [EMAIL PROTECTED] Oggetto: upload and download files Hi, i'm a novice of this software and i have a question: how I can upload and download files from/to server site from client pc in a vnc network? Thank you!!! ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Connection through Dial up
Dear Ghassan " Can I use the VNC to connect two computers connect to the internet via modem dial up?" Yes, it is possibile. " I tried and it did not work. I got the IP of every computer after the connection to the internet using IPconfig/all and tried to connect, but it did not work." Did you ping one PC from the other and viceversa? If so, which error did you get? Which is the VNC release? If it is 4.0 b4 have a look at the application event log of the PC where you have installed VNCServer: it logs each attempted connection from a viewer. Cheers Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Ghassan Dib [mailto:[EMAIL PROTECTED] Inviato: venerdl 7 maggio 2004 16.12 A: [EMAIL PROTECTED] Oggetto: Connection through Dial up Dear all, Can I use the VNC to connect two computers connect to the internet via modem dial up? I tried and it did not work. I got the IP of every computer after the connection to the internet using IPconfig/all and tried to connect, but it did not work. Any suggestions. Thank you Ghassan Dib ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Problem
Dear Miklos; try version 4.0b4. The latest VNCServer release logs into the application event log any connection from a viewer. If an error occurs, it is logged as well. Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Mandics Miklss [mailto:[EMAIL PROTECTED] Inviato: mercoledi 5 maggio 2004 14.23 A: [EMAIL PROTECTED] Oggetto: Re: Problem the version is 3.3.7.0 and it dosen't left any error messagejust quit ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: VNCserver connecting problem
Dear Ken Be sure that VNCServer is actually running and that there is only one version of VNCServer which is running. I mean different versions of VNCServer (e.g. 3.3.7 and 4.0b4) can coexist on one machine but the first instance will allocate TCP Port 5900 whereas the others will listen on different port numbers (5901, 5902 etc.). Be sure that VNC is actually listening on port 5900! >From the command prompt window, you can issue the netstat command to see which ports are used and along with their status. Cheers Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: naoki_murakami [mailto:[EMAIL PROTECTED] Inviato: mercoledi 28 aprile 2004 8.57 A: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Oggetto: Re: VNCserver connecting problem Subject: R: VNCserver connecting problem Dear Livio, As of your advice, I have downloaded 4.0 b4, and installed to both of my server and viewer, and then tried again. Unfortunately, the situation seems not to be improved: I still have an error of "unable connect to host: Connection refused (10061)" instead of "Your connection has been rejected"(on version 3.3.3R7) I have checked the event viewer application log, and what I have found was: "TcpListener on port 5800 failed (unable to bind listening socket)" and "TcpListener on port 5900 failed (unable to bind listening socket)" What I am thinking is that this connecting problem is not caused of VNC but of someother cause. Maybe these ports have been occupied by someother application or whatever.I think I will check out the port settings of my server(Win2000pro). Do you have any clue? Please keep me advise. Thanks, Livio. > I would try to install VNC-Server 4.0 b4 because it stores in the > Application event log the attempted connections from a viewer. I think this > would help diagnose your problem. > > Regards > > Livio Curzola > Software engineer ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: VNCserver connecting problem
Dear Ken: I would try to install VNC-Server 4.0 b4 because it stores in the Application event log the attempted connections from a viewer. I think this would help diagnose your problem. Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: naoki_murakami [mailto:[EMAIL PROTECTED] Inviato: lunedi 26 aprile 2004 8.12 A: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Oggetto: Re: VNCserver connecting problem Subject: R: VNCserver connecting problem Thank for your reply, Livio, hereunder, > If I understand your network configuration, you are trying to remote access > PC1 (192.168.0.2 - VNCServer) from PC2 (192.168.0.200 - VNCViewer) by means > of a dial - up ISDN connection set up on PC3 (192.168.0.1 - Remote Access > Server defined) aren't you? Yes,this is exactly what I am trying to do. > If so, be sure RAS let you access all the PCs networked with PC3 and not > merely access PC3 itself. It seems to me that RAS configuration is > responsible of problems you are facing. > Try to install VNC Server on PC3 and access it from PC1: if everything is > fine check your RAS settings. Also, have a look at the event log on PC3 and > check whether some entry relates RAS and VNC. My RAS(PC3) is not a PC, it is a dial-up router, so I cannot install VNC nor any other application either. I checked RAS settings and access log (not the event log) again, but they seem OK to me. *PC1 (server) and RAS are regularly connected. As a matter of fact, I am using this PC1-PC2-RAS component for FTP purpose as well (network drive file sharing and so on), but I do not have any problem so far. I could even get the ping back to PC2 from PC1 via RAS. Only the VNC connecting does not work; messages of "Your connection has been rejected" or "Connection closed" that what I would get. May be my VNC setting configulation is not good? or should try 3.3.7 as Seak said last time? Any further idea you have, let me know, please. Thanks. Ken Yokota. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: VNCserver connecting problem
Dear Ken, If I understand your network configuration, you are trying to remote access PC1 (192.168.0.2 - VNCServer) from PC2 (192.168.0.200 - VNCViewer) by means of a dial - up ISDN connection set up on PC3 (192.168.0.1 - Remote Access Server defined) aren't you? If so, be sure RAS let you access all the PCs networked with PC3 and not merely access PC3 itself. It seems to me that RAS configuration is responsible of problems you are facing. Try to install VNC Server on PC3 and access it from PC1: if everything is fine check your RAS settings. Also, have a look at the event log on PC3 and check whether some entry relates RAS and VNC. Kind regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: naoki_murakami [mailto:[EMAIL PROTECTED] Inviato: giovedi 22 aprile 2004 2.18 A: [EMAIL PROTECTED] Oggetto: VNCserver connecting problem Hello, I am new on VNC, and I need help. In my LAN I have Win2000Pro as server which is connected to dial-up router as Remote Access Server(NTTME/MN128SOHO-IB3) and then ISDN inbetween the router and viewer(WinXP). WinVNCVersion3.3.3R7 has been installed on both of server and viewer. When I try to connect from viewer, for the first few times I have an error message "Your connection has been rejected." and afterward I can get the pop-up window for password input. However, even if the password is correct, it would end up with an error message "Connection closed." (When the password is wrong, I would have a message "VNC authentication failed!") IP address is set for dial-up router(192.168.0.1), for VNCserver(192.168.0.2), for viewer(192.168.0.200) Why it cannot be connected? Does anyone have any idea for which part I should check? Thank you. Ken Yokota ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: R: Failed to Connect to Server
Dear Ying " I tried to using VNC after I connected to my work, then I got different message: 'VNC authentication failed!'. I have set up a password in my work PC." It looks like you are providing the wrong password. Be sure you are not mixing up lower and upper case letters (by saying this, I assume you are making use of western keyboards on both your home and work PC. I do not know to which extent this assumption is right in your case). Also, be sure you do not have CAPS-Lock key down on your work PC. Cheers Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Ying Wu [mailto:[EMAIL PROTECTED] Inviato: mercoledl 7 aprile 2004 18.59 A: Livio Curzola Oggetto: Re: R: Failed to Connect to Server You are right, both my work PC and home PC are Windows based. I thought VNC should work if I provide the IP address. I was wrong. I could get to my work network through web based connection from my home PC. I tried to using VNC after I connected to my work, then I got different message: 'VNC authentication failed!'. I have set up a password in my work PC. I have my work PC running VNC server. I have my home PC running VNC viewer. But I locked my work PC right now. Is that the only problem? Please help! I appreciate your quick response and helpful information greatly. Cheers, Ying --- Livio Curzola <[EMAIL PROTECTED]> wrote: > Dear Ying > > You cannot establish a VNC connection to your work > PC if you cannot ping it. > Assuming both machines are Windows based, how do you > try to connect to your > work PC from home? And is there a RAS service > defined on your work PC? > > Cheers > > Livio Curzola > Software engineer > > Tel : +39 0481 523874 > mail :[EMAIL PROTECTED] > > t&t > telematica e trasporti srl > visit our web: www.t-t.it > > Sede > Autoporto pad.A c/o B.I.C. I 34170 GORIZIA > tel. +39 0481 523874 fax +39 0481 523879 > e-mail : [EMAIL PROTECTED] > > its research centre > Area Science Park - Padriciano 99 I 34012 Trieste > Italia > Tel: +39 040 3755371 - fax: +39 040 3755372 > e-mail : [EMAIL PROTECTED] > > > > > This document is intended for, and should only be > read by,those persons to > whom it is addressed. Its contents are confidential > and if you have received > this message in error, please delete it and notify > us immediately, e-mail > "[EMAIL PROTECTED]". Any form of reproduction, > dissemination, copying, disclosure, > modification, distribution and / or publication of > this message without our > prior written consent is strictly prohibited. Any > views expressed in this > message are those of the individual sender, and do > not necessarily represent > the position of t&t. Furthermore t&t does not > authorise nor use e-mail for > official contractual correspondence. Nothing &
R: how to transfer files via vnc
Maurizio, RealVNC does not provide a file transfer facility. You should either make use of an ftp server or try a VNC flavour that support file transfer, such as UltraVNC (Windows only) - Non h possible effettuare trasferimenti di file tramite RealVNC. Dovresti usare un server ftp oppure provare una variante del VNC che preveda la possibilit` effettuare trasferimenti di file, ad esempio UltraVNC (disponibile solo sotto Windows) Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Maurizio [mailto:[EMAIL PROTECTED] Inviato: venerdl 26 marzo 2004 10.34 A: [EMAIL PROTECTED] Oggetto: how to transfer files via vnc Hi guys, I'am Maurizio from Rome - Italy. Please, excuse me for my bad english, I'll try to be understandable. I would like to know if is possible,and how, to transfer files between a vnc viewer and a vnc server. Thank you Maurizio - Rome - Italy ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: NT Server refusing connection
Barrie, which version of VNC Server are you running on your server? If you are running VNC 4.0b4, have a look on the event log and see if VNC have logged any error message like "Unable to set sockopt TCP_NODELAY". If so, I am running into your same problem (except that my machine runs W2K professional) and to solve it I had to rollback to VNCServer 3.3.7. VncViewer seems not to have any role in this problem. It pops up independent of VNCViewer release. Also, on previous mails I have found someone suggesting to uninstall ServicePack 6 on your server and go back to ServicePack 5. I hope that this helps Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: Barrie, Stephan [mailto:[EMAIL PROTECTED] Inviato: lunedl 8 marzo 2004 22.43 A: '[EMAIL PROTECTED]' Cc: Russie, Sophie Oggetto: NT Server refusing connection Guys, I have an NT Server here running Service pack 6, when I attempt to connect via the viewer on my XP machine, I get connection refused, however I can see and ping the server from here, both my IP and the server's IP is in each machines route table Here's the twist I am able to vnc into my xp machine from the server! So where am i going wrong?? Your assistance would be greatly appreciated! Stephan. __ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email __ ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Server closed connection unexpectedly
James, I apologize for my mistake. Unfortunately I am back to my original problem. I have set VNC Server 4 to listen on port 5901: by trying a connection to it (myipaddress:1) the viewer prompts the message "Server closed connection unexpectedly". I have examined the event viewer of the problem PC and found the following error messages: - Servermain: unable to set sockopt TCP_NODELAY: (10055) - RegConfig: RegQueryInfoKey. The handle is invalid. (6) - Threading: failed. RegConfig(a82480): RegNotifyChangeKeyvalue: The handle is invalid. (6) Even by trying to import 3.3 settings, any incoming connection returns the first error message. Thanks for your support. Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it <http://www.t-t.it/> Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Server closed connection unexpectedly
James, I apologize for my mistake. Unfortunately I am back to my original problem. I have set VNC Server 4 to listen on port 5901: by trying a connection to it (myipaddress:1) the viewer prompts the message "Server closed connection unexpectedly". I have examined the event viewer of the problem PC and found the following error messages: - Servermain: unable to set sockopt TCP_NODELAY: (10055) - RegConfig: RegQueryInfoKey. The handle is invalid. (6) - Threading: failed. RegConfig(a82480): RegNotifyChangeKeyvalue: The handle is invalid. (6) Even by trying to import 3.3 settings, any incoming connection returns the first error message. For a better understanding of the current configuration I include a jpeg file with the registry settings under HKEY_LOCAL_MACHINE Thanks for your support. Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: James Weatherall [mailto:[EMAIL PROTECTED] Inviato: venerdl 30 gennaio 2004 0.31 A: 'Livio Curzola'; [EMAIL PROTECTED] Oggetto: RE: Server closed connection unexpectedly Livio, By default, VNC 3.3.7 will attempt to run on port 5900. Similarly a default install of VNC 4.0 will attempt to run on port 5900 under windows. You must set the two versions to use different ports if you wish them to co-exist. Even though VNC 4 was running, it was not actually accepting connections, because it couldn't get port 59000, because that was already in use by VNC 3.3.7. Cheers, Wez @ RealVNC Ltd. [demime 0.99d.1 removed an attachment of type image/jpeg which had a name of Settings.jpg] ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Server closed connection unexpectedly
James, VNC server appears as started in the Services Control Panel. I am going to describe the precise sequence of steps that led to the connection refused message. - Since the problem server is on a remote site, I have accessed to it through VNC Server 3.3.7 and installed VNC Server 4.0b on it (a copy of the installation program is on the server); - The installation was successful: at this point both versions of VNC server were running; - At this point, I have stopped VNC Server 3.3.7: the connection was closed; - I have tried to connect to the problem PC but I was prompted the connection refused message: a guy on the remote site confirmed that VNC Server 4 was running while VNC Server 3.3.7 was stopped. - VNC Server 4 was uninstalled and connection re-established by means of VNC 3.3.7 Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: James Weatherall [mailto:[EMAIL PROTECTED] Inviato: giovedl 29 gennaio 2004 13.35 A: 'Livio Curzola'; [EMAIL PROTECTED] Oggetto: RE: Server closed connection unexpectedly Livio, Connection refused means that nothing is listening on that port on that machine. Are you sure that VNC Server is running? Cheers, Wez @ RealVNC Ltd. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: Server closed connection unexpectedly
James, I have emptied the Application Event Log on the problem server but I am still unable to connect to it. The viewer prompts up the message: "Unable to connect to host: Connection refused (10061)". Regards Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. -Messaggio originale- Da: James Weatherall [mailto:[EMAIL PROTECTED] Inviato: mercoledl 28 gennaio 2004 18.22 A: 'Livio Curzola'; [EMAIL PROTECTED] Oggetto: RE: Server closed connection unexpectedly Livio, Check that the Application Event Log on the problem server is not full - VNC Server 4b4 for Windows will quit if it finds itself unable to log connections properly, rather than risk having un-logged connections made to a server. Cheers, Wez @ RealVNC Ltd. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Server closed connection unexpectedly
Hello to all. I have just upgrade a VNC server, installed on a Windows NT4 Server computer, from release 3.3.7 to release 4.0.b4. The problem I am facing is that whenever I try to establish a new connection to this computer, VNCViewer prompts the following error message: "Server closed connection unexpectedly". At the same time the VNC Service on the remote machine stops. The problem arise with both 3.3.7 and 4.0b4 versions of the viewer. Other upgrades, on various Windows machines (NT 4 Workstation / NT 4 Server ( W2K Professional) do not show this same problem. Does anybody have a workaround for it. Regards, Livio Curzola Software engineer Tel : +39 0481 523874 mail :[EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it <http://www.t-t.it/> Sede Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 e-mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> This document is intended for, and should only be read by,those persons to whom it is addressed. Its contents are confidential and if you have received this message in error, please delete it and notify us immediately, e-mail "[EMAIL PROTECTED]". Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without our prior written consent is strictly prohibited. Any views expressed in this message are those of the individual sender, and do not necessarily represent the position of t&t. Furthermore t&t does not authorise nor use e-mail for official contractual correspondence. Nothing received in e-mail has any contractual validity. t&t reserves the right to monitor all e-mail communications through its networks. This footnote also confirms that this email message has been checked for known computer viruses. ___ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
R: 1 click highlights everything
Hi Daniel! I've encountered the same problem under WindowsNT. It usually happens when I try to connect on a remote machione just after it has been rebooted and disappears after a while. Regards Livio Curzola t&t [EMAIL PROTECTED] -Messaggio originale- Da: Daniel Tan [mailto:[EMAIL PROTECTED]] Inviato: giovedl 17 ottobre 2002 8.45 A: VNC Oggetto: 1 click highlights everything Hi all, i have encountered some problems with the mouse only on Win2K and Win XP machines. my client and server mahcines are win32 based. sometimes the mouse go hay wire and then when i left click, it highlights every icon on the desktop and opens them. is that a bug??? anyone encountered this error before? Regards, Daniel Tan 67469188 Ext.665 DID: 68430665 MIS Department Shop N Save Pte Ltd : [EMAIL PROTECTED] [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
C++Builder app crashing when connected with VNCViewer
Hi I use VNC to remote control an application written in C++Builder v 4. When I move the mouse down to the taskbar of my remote PC (where my app is running), the BCB app crashes with an EAccessError (AccessViolation eror). I use Real VNC 3.3.4 on both client and server side. I have posted such problem some weeks ago, before the latest release of VNC, and was assured such problem should be fixed in this new release. Is there any workaround to such problem or any setting that I should use to avoid it? Thanks Livio Curzola Software Developer Tel : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
R: VNC crashes apps on server
Jake, thank you for your answer. Could you suggest me a test case to catch the problem? I try to catch any unhandled application exception on the OnExcept event of the application itself but that event never fires: the application crashes without going through it. Moreover, I have experienced this problem only when I am remotely connected to a PC running Windows NT Server: I have never seen it when I connect to a Windows NT Workstation. Livio -Messaggio originale- Da: Jacob Hoover [mailto:[EMAIL PROTECTED]] Inviato: mercoledl 4 settembre 2002 18.30 A: [EMAIL PROTECTED] Oggetto: RE: VNC crashes apps on server I have seen this problem in the past but have never found a workaround myself. I don't have any Boreland development environment, otherwise I would be willing to generate a test case and attempt to find the root of the problem. I have a feeling it has something to do with the hooks vnc installs to get updates. If we knew what exactly was causing it we could probably find a workaround. Jake Hoover -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Livio Curzola Sent: Wednesday, September 04, 2002 6:03 AM To: ([EMAIL PROTECTED]) Subject: VNC crashes apps on server Hi! I am using win-vnc server (3.3.2 R9) on a NT 4 Server SP6. An application written with C++ Builder 4 crashes after I am connected via VNC from an NT4 Workstation. I've browsed through the mail archives and found out that this is known problem for apps written with Borland tools, mainly Delphi. Nonetheless I was not able to find out any mail describing a fix. Has anyone else met with this problem recently? And can anyone tell me about a feasible solution? Livio Curzola Software Developer Tel : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
VNC crashes apps on server
Hi! I am using win-vnc server (3.3.2 R9) on a NT 4 Server SP6. An application written with C++ Builder 4 crashes after I am connected via VNC from an NT4 Workstation. I've browsed through the mail archives and found out that this is known problem for apps written with Borland tools, mainly Delphi. Nonetheless I was not able to find out any mail describing a fix. Has anyone else met with this problem recently? And can anyone tell me about a feasible solution? Livio Curzola Software Developer Tel : +39 0481 523874 mail : [EMAIL PROTECTED] t&t telematica e trasporti srl visit our web: www.t-t.it Autoporto pad.A c/o B.I.C. I 34170 GORIZIA tel. +39 0481 523874 fax +39 0481 523879 its research centre Area Science Park - Padriciano 99 I 34012 Trieste Italia Tel: +39 040 3755371 - fax: +39 040 3755372 e-mail : [EMAIL PROTECTED] ___ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list