RE: Message from Ken Shoulders
Robin, Some quick sniffing around produced this site, http://www.proton21.com.ua/articles_en.html If you can find anything relating actual experimental proceduces, rather than results and sample analysis, please note it. I've never used copper as an electrode, as it tends to disintegrate with such ease that one ends up with a one shot spark gap. Perhaps if I did I would be more familiar with the destructive effects on the anode like what we see here. K. -Original Message- From: Robin van Spaandonk [mailto:[EMAIL PROTECTED] Sent: Saturday, May 14, 2005 9:41 PM To: vortex-l@eskimo.com Subject: Re: Message from Ken Shoulders In reply to Keith Nagel's message of Sat, 14 May 2005 00:15:35 -0400: Hi, [snip] I'm just curious how he (they) are getting that weird discharge shape in the copper electrode. I've never seen anything like that before. I'm referring to that thing on page 7. Was that a rod that was blasted back? If you look closely at the bottom of it, you can still see the remains of a small sphere, though there appears to be more metal present than would fit in a sphere. Perhaps the remains of the sphere shrunk? I must admit however to being a little wary of this whole thing. If true, it is a major discovery, however I'm curious why this sort of thing hasn't turned up previously during heavy arc welding. Regards, Robin van Spaandonk All SPAM goes in the trash unread.
Re: Message from Ken Shoulders
In reply to Keith Nagel's message of Sat, 14 May 2005 00:15:35 -0400: Hi, [snip] I'm just curious how he (they) are getting that weird discharge shape in the copper electrode. I've never seen anything like that before. I'm referring to that thing on page 7. Was that a rod that was blasted back? If you look closely at the bottom of it, you can still see the remains of a small sphere, though there appears to be more metal present than would fit in a sphere. Perhaps the remains of the sphere shrunk? I must admit however to being a little wary of this whole thing. If true, it is a major discovery, however I'm curious why this sort of thing hasn't turned up previously during heavy arc welding. Regards, Robin van Spaandonk All SPAM goes in the trash unread.
Re: Message from Ken Shoulders
In reply to Jed Rothwell's message of Fri, 13 May 2005 11:13:46 -0400: Hi, [snip] Subject: EVOs And The Hutchison Effect A paper by Ken Shoulders entitled EVOs And The Hutchison Effect will be presented at the 2005 Conference on Cold Fusion to be held at MIT on May 21. A 1 MB .PDF file showing some of the graphics slides to be used in that presentation can now be downloaded from: http://www.svn.net/krscfs/ Ken Now read http://www.escribe.com/science/vortex/m31728.html again. Regards, Robin van Spaandonk All SPAM goes in the trash unread.
RE: Message from Ken Shoulders
I'm just curious how he (they) are getting that weird discharge shape in the copper electrode. I've never seen anything like that before. I'm referring to that thing on page 7. Was that a rod that was blasted back? Or did it grow out of the electrode? The former seems reasonable to me, the latter is downright bizarre. K. -Original Message- From: Robin van Spaandonk [mailto:[EMAIL PROTECTED] Sent: Friday, May 13, 2005 11:50 PM To: vortex-l@eskimo.com Subject: Re: Message from Ken Shoulders In reply to Jed Rothwell's message of Fri, 13 May 2005 11:13:46 -0400: Hi, [snip] Subject: EVOs And The Hutchison Effect A paper by Ken Shoulders entitled EVOs And The Hutchison Effect will be presented at the 2005 Conference on Cold Fusion to be held at MIT on May 21. A 1 MB .PDF file showing some of the graphics slides to be used in that presentation can now be downloaded from: http://www.svn.net/krscfs/ Ken Now read http://www.escribe.com/science/vortex/m31728.html again. Regards, Robin van Spaandonk All SPAM goes in the trash unread.
