First happy new year to you all!
I think I got a reboot problem and have no idea what happened.
It's an Alix1 board fitted with a LAN1641 (4 Ethernet PCI card ). The cold boot
(Power on ) is fine, but sometimes when I issue reboot, the next boot will
fail in the middle. Can anyone tell me what the possible problem is? Thanks in
advance.
When boot failed, it said device not ready and here is the detail:
==
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=/dev/hda1 console=ttyS0,38400n8 ramdisk=16000
[Linux-bzImage, setup=0x2800, size=0x14d9d8]
initrd /initrd.img
[Linux-initrd @ 0xf5a3000, 0x1fc264 bytes]
Linux version 2.6.23-486-voyage (2.6.23-2) (r...@voyage) (gcc version 4.1.2 2006
1115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Wed Dec 10 14:12:29 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: - 0009e800 (usable)
BIOS-e820: 0009e800 - 000a (reserved)
BIOS-e820: 000f - 0010 (reserved)
BIOS-e820: 0010 - 0f7b (usable)
BIOS-e820: 0f7b - 0f7b3000 (ACPI NVS)
BIOS-e820: 0f7b3000 - 0f7c (ACPI data)
BIOS-e820: - 0001 (reserved)
0MB HIGHMEM available.
247MB LOWMEM available.
Zone PFN ranges:
DMA 0 - 4096
Normal 4096 -63408
HighMem 63408 -63408
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0:0 -63408
DMI not present or invalid.
Allocating PCI resources starting at 1000 (gap: 0f7c:f083)
Built 1 zonelists in Zone order. Total pages: 62913
Kernel command line: root=/dev/hda1 console=ttyS0,38400n8 ramdisk=16000
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.062 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 245996k/253632k available (1808k kernel code, 7060k reserved, 640k data,
164k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffac000 - 0xf000 ( 332 kB)
pkmap : 0xff80 - 0xffc0 (4096 kB)
vmalloc : 0xd000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc000 - 0xcf7b ( 247 MB)
.init : 0xc0368000 - 0xc0391000 ( 164 kB)
.data : 0xc02c4021 - 0xc036419c ( 640 kB)
.text : 0xc010 - 0xc02c4021 (1808 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.02 BogoMIPS (lpj=498514)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to e000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode: 0 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfa990, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
Time: tsc clocksource has been installed.
PCI: Bridge: :00:0c.0
IO window: e000-efff
MEM window: efd0-efdf
PREFETCH window: efe0-efef
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2032k freed
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot :00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: :00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
Clocksource tsc unstable (delta = 124870882 ns)
hda: SanDisk SDCFH2-004G, 6Time: pit clocksource has been installed.
CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 8027712 sectors (4110 MB) w/1KiB Cache, CHS=7964/16/63, DMA
hda: hda1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
geode-aes: GEODE AES
