Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
No, hostapd 2.1 still segfaults, also with ieee80211d=1 Back to 1.0 again. Kim-man 'Punky' TSE punky...@punknix.com schrieb am 8:25 Montag, 9.Juni 2014: Got it. The crash happens when you define country_code=DE, which I never do (and I never define country code either). And workaround is adding ieee80211d=1 to hostapd.conf, e.g. country_code=DE ieee80211d=1 2.2 is out, let see if new version fixes this. Regards, Punky On 6/9/2014 1:38 AM, reiner otto wrote: hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux ( http://linux.voyage.hk http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/ ) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk)___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
Can you show to us dmesg where it crash? On 6/13/2014 9:44 PM, reiner otto wrote: No, hostapd 2.1 still segfaults, also with ieee80211d=1 Back to 1.0 again. Kim-man 'Punky' TSE punky...@punknix.com schrieb am 8:25 Montag, 9.Juni 2014: Got it. The crash happens when you define country_code=DE, which I never do (and I never define country code either). And workaround is adding ieee80211d=1 to hostapd.conf, e.g. country_code=DE ieee80211d=1 2.2 is out, let see if new version fixes this. Regards, Punky On 6/9/2014 1:38 AM, reiner otto wrote: hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com mailto:punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux ( http://linux.voyage.hk http://linux.voyage.hk/http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/http://store.voyage.hk/ ) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
Sorry, dmesg gone, as I am back to 1.0. From syslog: Jun 13 13:06:32 localhost vmunix: [ 17.699546] hostapd[2985]: segfault at 0 ip 080ef64c sp bfbe7b30 error 4 in hostapd[8048000+ff000] Punky Tse punky...@punknix.com schrieb am 16:18 Freitag, 13.Juni 2014: Can you show to us dmesg where it crash? On 6/13/2014 9:44 PM, reiner otto wrote: No, hostapd 2.1 still segfaults, also with ieee80211d=1 Back to 1.0 again. Kim-man 'Punky' TSE punky...@punknix.com schrieb am 8:25 Montag, 9.Juni 2014: Got it. The crash happens when you define country_code=DE, which I never do (and I never define country code either). And workaround is adding ieee80211d=1 to hostapd.conf, e.g. country_code=DE ieee80211d=1 2.2 is out, let see if new version fixes this. Regards, Punky On 6/9/2014 1:38 AM, reiner otto wrote: hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com mailto:punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux ( http://linux.voyage.hk http://linux.voyage.hk/http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/http://store.voyage.hk/ ) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk)___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
And what syslog shows before and after? Can you also help test if country_code=DE is removed? On 6/13/2014 10:33 PM, reiner otto wrote: Sorry, dmesg gone, as I am back to 1.0. From syslog: Jun 13 13:06:32 localhost vmunix: [ 17.699546] hostapd[2985]: segfault at 0 ip 080ef64c sp bfbe7b30 error 4 in hostapd[8048000+ff000] Punky Tse punky...@punknix.com schrieb am 16:18 Freitag, 13.Juni 2014: Can you show to us dmesg where it crash? On 6/13/2014 9:44 PM, reiner otto wrote: No, hostapd 2.1 still segfaults, also with ieee80211d=1 Back to 1.0 again. Kim-man 'Punky' TSE punky...@punknix.com mailto:punky...@punknix.com schrieb am 8:25 Montag, 9.Juni 2014: Got it. The crash happens when you define country_code=DE, which I never do (and I never define country code either). And workaround is adding ieee80211d=1 to hostapd.conf, e.g. country_code=DE ieee80211d=1 2.2 is out, let see if new version fixes this. Regards, Punky On 6/9/2014 1:38 AM, reiner otto wrote: hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com mailto:punky...@punknix.com mailto:punky...@punknix.com mailto:punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux ( http://linux.voyage.hk http://linux.voyage.hk/ http://linux.voyage.hk/http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/ http://mubox.voyage.hk/http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/ http://store.voyage.hk/http://store.voyage.hk/ ) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk http://linux.voyage.hk/http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/http://store.voyage.hk/) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
Attached excerpt from syslog. As 2.2 is out, as you said, testing without DE only makes sense with 2.2, as it looks like, that changing the country settings triggers the segfault. Change in country setting is a MUST to use correct frequencies and TX power. Punky Tse punky...@punknix.com schrieb am 16:42 Freitag, 13.Juni 2014: And what syslog shows before and after? Can you also help test if country_code=DE is removed? On 6/13/2014 10:33 PM, reiner otto wrote: Sorry, dmesg gone, as I am back to 1.0. From syslog: Jun 13 13:06:32 localhost vmunix: [ 17.699546] hostapd[2985]: segfault at 0 ip 080ef64c sp bfbe7b30 error 4 in hostapd[8048000+ff000] Punky Tse punky...@punknix.com schrieb am 16:18 Freitag, 13.Juni 2014: Can you show to us dmesg where it crash? On 6/13/2014 9:44 PM, reiner otto wrote: No, hostapd 2.1 still segfaults, also with ieee80211d=1 Back to 1.0 again. Kim-man 'Punky' TSE punky...@punknix.com schrieb am 8:25 Montag, 9.Juni 2014: Got it. The crash happens when you define country_code=DE, which I never do (and I never define country code either). And workaround is adding ieee80211d=1 to hostapd.conf, e.g. country_code=DE ieee80211d=1 2.2 is out, let see if new version fixes this. Regards, Punky On 6/9/2014 1:38 AM, reiner otto wrote: hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com mailto:punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux ( http://linux.voyage.hk http://linux.voyage.hk/http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/http://store.voyage.hk/ ) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) segfault_hostapd.rar Description: Binary data ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk )___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] hostapd 2.1 from experimental repository seg faults
Got it. The crash happens when you define country_code=DE, which I never do (and I never define country code either). And workaround is adding ieee80211d=1 to hostapd.conf, e.g. country_code=DE ieee80211d=1 2.2 is out, let see if new version fixes this. Regards, Punky On 6/9/2014 1:38 AM, reiner otto wrote: hostapd.conf: interface=wlan0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=2 debug=4 #dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd.wlan0 ctrl_interface_group=0 channel=6 hw_mode=g macaddr_acl=0 auth_algs=3 eapol_key_index_workaround=0 eap_server=0 wpa=3 #ssid=voyage-mpd ssid=x wpa_passphrase=xyz #wpa_passphrase=voyage-mpd wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP #eapol_version=1 #wme_enabled=1 #ieee80211n=1 #ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] country_code=DE board: pcengines.ch APU card: http://pcengines.ch/pdf/wle200nx.pdf Punky Tse punky...@punknix.com schrieb am 16:18 Sonntag, 8.Juni 2014: On 6/8/2014 2:05 AM, babajaga wrote: During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Can you post your hostapd.conf, what is your wirelesss cards and run on which board? Thanks. Might be good idea to remove 2.1. Or move forward? -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux ( http://linux.voyage.hk http://linux.voyage.hk/) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk http://mubox.voyage.hk/) * Voyage Store (http://store.voyage.hk http://store.voyage.hk/ ) -- Regards, Kim-man Punky Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
[Voyage-linux] hostapd 2.1 from experimental repository seg faults
During update/upgrade I got a new version of hostapd from the repo. And I got these segfaults after boot: https://bbs.archlinux.org/viewtopic.php?id=176814 Might be good idea to remove 2.1. -- View this message in context: http://voyage-linux.34677.n3.nabble.com/hostapd-2-1-from-experimental-repository-seg-faults-tp4026048.html Sent from the Voyage Linux mailing list archive at Nabble.com. ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
